Osmo Mobile 2 TheOSMOTMMobile2isanadvancedgimbalthatturnsyourmobilephoneintoasmartmotion camerabystabilizingitwhileinmotion.Itiseasytouse,andpowerfulfeaturessuchasActiveTrack andMotionTimelapseareavailablethroughtheDJIGOapp. Joystick 1. Mobile Phone Holder 2. Pan Motor 3. 4. Power/Mode Button 5. Charging Port (Micro USB) 6. Shutter/Record Button 7. System Status LED 8. Battery Level Indicators 9. Tilt Motor 10. Adjustable Arm 11. Balance Adjustment Knob 12. Holder Lock Knob 13. Roll Motor 14. USB Port 15. External Device Mount 16. Zoom In/Out Switch 1. Install the DJI GO App 2. Charging the Battery To charge the Osmo Mobile 2, connect theUSB adapter (not included) to the chargingport using the provided power cable. The battery is fully charged when thesystem status LED become solid white. USB Adapter Charging time : 2 hoursand 35 minutes ( when charging at 2 A) Max Run-time: 15 hours The Osmo Mobile 2 supports charging mobile device. 3. Mount and Balance the Mobile Phone Ensure to mount and balance the mobile phone with Osmo Mobile 2 powered off. Place the mobile phone in the mobile phone holder while pulling out the holder. The system is balanced if the mobile phone remainslevel when released, balanced only by the gimbal. Osmo Mobile 2 supports mount the mobile phone vertically and horizontally. To mount the mobile phone vertically, loosen the holder lock knob and adjust the mobile device holder to mount and balance the mobile device. 4. Connect to the DJI GO App To Power On: Press and hold the button Launch the DJI GO app and then followthe instructions to connect to the Osmo Mobile 2. Activate the Osmo Mobile 2 when using it for the firsttime. This requires an internet connection. 5.Controls Use the joystick to pan ortilt the mobile phone. Position the mobile phonedirectly by hand. Press once to start/stop recording or take a photo (depending the settings in the DJI GO app). Tap once to switch the follow mode. Tap twice to center the mobile phone. Tap three times to switch between the mobile phones front and rear cameras. Specifications Gimbal Name: OSMO MOBILE 2 Model: OM170 Dimensions: 295mm113mm72mm(folded) Weight: 410g Consumption:1.2W Angular Vibration Range:0.03 Controllable RangePan: 160;Roll: 25;Tilt: 160 Mechanical RangePan:170;Roll:-90to +70; Tilt:170 Max Controllable Speed:120/s Mobile Phone Width Range:58.6 mm-85 mm Wireless Mode Bluetooth Low Energy:4.0 Mode: l2ICR19/66 Type: 18650 LiPo Capacity: 2600mAh Energy: 18Wh Voltage: 3.6V Charging Temperature: 5to 40 Operating Temperature: 0to 45 Intelligent Battery Compliance Information FCC Compliance Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information This equipment complies with FCC radiation exposurelimits set forth for an uncontrolled environment. This transmitter must not be co-located or operating inconjunction with any other antenna or transmitter. ISEDC RSS Warning This device complies with licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Ceta conf cont Cet out appareilest formeauxlim trl. doitpastre metteurned transmetteur r. nnementRFISEDC uteautreanteenne mitesd'exposit nnementnon ctionavectou erenconjonc oufonctionne urunenviron tionderayon coimplant tabliespou KCC Warning Message
. hereby declares SZ DJI Osmo Technology Co.,Ltd. SZ DJI Osmo Technology Co.,Ltd. EU Compliance Statement that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available online atwww.dji.com/euro-compliance EU contact address: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany por la Declaracin de cumplimiento UE presente declara que este dispositivo cumple los requisitos bsicos y el resto de provisiones relevantes de la Directiva 2014/53/EU. Hay disponible online una copia de la Declaracin de conformidad UE enwww.dji.com/euro-compliance Direccin de contacto de la UE:
DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany EU-verklaring van overeenstemming verklaart hierbij dat dit apparaat voldoet aan de essentile vereisten en andere relevante bepalingen van Richtlijn 2014/53/EU. De EU-verklaring van overeenstemming is online beschikbaar op www.dji.com/euro-compliance Contactadres EU: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany Declarao de conformidade da UE atravs deste documento, que este dispositivo est em conformidade com os requisitos essenciais e outras disposies relevantes da Diretiva 2014/53/EU. Existe uma cpia da Declarao de conformidade da UE disponvel online emwww.dji.com/euro-compliance Endereo de contacto na UE:
DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany SZ DJI Osmo Technology Co.,Ltd. SZ DJI Osmo Technology Co.,Ltd. declara, Dic pres dell Una Web Indi DJI euro Une sitew Adr DJI EU-
Ger EU-
Eine www Kon DJI CAU Env Old Tha hiarazione sente dispos la direttiva 2 a copia della bwww.dji.c di conform sitivo conf 2014/53/EU a dichiarazi com/euro-co mit UE forme ai req U. ione di conf ompliance SZ DJI Osmo Technology Co.,Ltd. altre dispos quisiti essen nziali e alle dichiara c sizioni rilev che il vanti formit UE disponibil le online all l'indirizzo irizzo di con GmbH, Ind ntatto UE:
dustriestrass se. 12, 9761 18, Niederla auer, Germa any de conform claration d D Osmo Technology Co.,Ltd. pr rincipales ex 14/53/EU. openne 20 e copie de la a dclaratio om/euro-com www.dji.co n de confor mpliance xigences et mit UE : Pa dclare autres claus ar la prsen e que cet app ses pertinen nte, SZ DJI pareil est co ntes de la dir onforme aux x rective rmit UE es st disponible e sur le resse de con GmbH, Ind ntact pour l'U dustriestrass UE :
se. 12, 9761 18, Niederla auer, Germa any
-Complian rt den wese
-Richtlinie 2 e Kopie der w.dji.com/e ce: Hiermit entlichen An 2014/53/EU r EU-Konfo euro-compli t erklrt nforderunge en und ande t. U entspricht ormittserkl rung finde iance. en Sie online e auf
, dass dieses
, s SZ DJI Osmo Technology Co.,Ltd. n der stimmungen lgigen Bes eren einschl ntaktadresse GmbH, Ind e innerhalb dustriestrass der EU:
se. 12, 9761 18, Niederla auer, Germa any UTION: RI ISK OF EX NCORRECT IN AC CCORDING PLOSION T TYPE. DI G TO THE IF BATTER ISPOSE INSTRUCT RY IS REP OF USED TIONS LACED BY IES D BATTERI Y AN ly friendly vironmental appliances m d electrical a ha ave to be dis llecting poi co pliances is r ap or to similar c ntribute to r co sub bstances. disposal must not be sposed of se int via priva responsible collection po recycle valu ailand War rning messa age with the resi disposed of eparately. Th ate persons i e to bring th oints. With uable raw m f together w he disposal is for free. T e appliance this little pe materials and at the comm The owner o es to these co ersonal effo d the treatm dual waste, munal of old ollecting po ort, you ment of toxic c but oints
. Mexico Warning message La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Brazil Warning message Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio
:
SZ DJI Osmo Technology Co.,Ltd. SZ DJI Osmo Technology Co.,Ltd.
/ : (
: 2017 .03
:
SZ DJI Osmo Technology Co.,Ltd./China MSIP-CRM-dji-OM170
:
) /OM170