FCC ID: 2ANDR-PP1012023 Osmo Pocket 3

Download DJI Mimo App The DJI Mimo app is required when using Osmo Pocket 3. Search for

"DJI Mimo" in the mobile app store or scan the QR code with your mobile phone to download and install the DJI Mimo app. Introduction 1. 2. 3. 4. 5. 6. 7. 8. Roll Motor 9. Lanyard Hole Rotatable Touchscreen 10. Quick-Release Slot I Status LED 5D Joystick Title Motor Pan Motor Loudspeaker 11. USB-C Port 12. Camera 13. MicroSD Card Slot 14. Quick-Release Slot II 15. Microphone Shutter/Record Button Button Features Shutter/Record Button Press once: power on, take photos or record Press and hold: power off 5D Joystick Push stick: control gimbal direction or zoom Press once: back Press and hold: lock gimbal Double press: recenter gimbal Triple press: rotate gimbal Operating the Rotatable Touchscreen Rotate the touchscreen to Power On Rotate the touchscreen to the left to power on Osmo Pocket 3, and rotate the touchscreen to the right to power off. Tap or Swipe on the Touchscreen After Osmo Pocket 3 is powered on, the touchscreen displays the live view as well as the microSD card information, battery level and shooting mode. Tap or swipe on a touchscreen to interact with the Osmo Pocket 3. Inserting the MicroSD Card The footage shot on Osmo Pocket 3 is stored on a microSD card. A UHS-I Speed Grade 3 rating microSD card is required due to the fast read and write speeds necessary for high resolution video data. Charging Osmo Pocket 3 Connect a USB-C charger (not included) to the USB-C port using the Type-C to Type-C PD cable (included). It is recommended to use the DJI 30 W USB-C Charger or a USB-C charger that supports Power Delivery. Accessories Osmo Pocket 3 Battery Handle The built-in battery within the Osmo Pocket 3 battery handle has a capacity of 1000mAh. Connect the handle with Osmo Pocket 3 via the USB-C port, which can get more out of the camera. Osmo Pocket 3 Handle With 1/4 Thread Attach the Osmo Pocket 3 handle with 1/4 thread to Osmo Pocket 3 via the USB-C port. With attached, Osmo Pocket 3 is more comfortable to hold. Osmo Pocket 3 Wide-Angle Lens With magnetic design, the Osmo Pocket 3 wide-angel lens can be easily mounted the camera. When mounted, the camera can get a wider FOV and capture more within the frame. Specifications Model PP-101 Compatible DJI Charger DJI 30 W USB-C Charger Operating Temperature 0 to 40 C (32 to 104 F) Wi-Fi Wi-Fi Protocol 802.11 a/b/g/n/ac Wi-Fi Operating Frequency 2.4000-2.4835 GHz, 5.150-5.250 GHz, 5.725-5.850 GHz Wi-Fi Transmission Power 2.4 GHz: 23 dBm

(FCC), 20 dBm EIRP

(CE/SRRC/MIC) 5.1 GHz: 23 dBm (FCC/SRRC), 20 dBm (CE) 5.8 GHz: 23 dBm (FCC/SRRC), 14 dBm (CE) Bluetooth Bluetooth Protocol BR/EDRBLE Bluetooth Operating Frequency 2.4GHz-2.4835GHz Bluetooth Transmission Power 14 dBm

(EIRP) FCC Compliance Notice Suppliers Declaration of Conformity Product name: Osmo Pocket 3 Model Number: PP-101 Responsible Party: DJI Research LLC Responsible Party Address: 435 Portage Ave, Palo Alto, CA 94306 Website: www.dji.com We, DJI Research LLC, being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body at least 10mm separation distance. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided. These requirements set a SAR limit of 4 W/kg averaged over ten gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the limbs. ISED Compliance Notice CAN ICES-003 (B) / NMB-003(B) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :(1)Lappareil ne doit pas produire de brouillage; (2)Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.The portable device is designed to meet the requirements for exposure to radio waves established by the CNR-102. Cet quipement est conforme aux limites dexposition aux rayonnements RSS-102 tablies pour un environnement non contrl. Lutilisateur final doit suivre les instructions spcifiques pour satisfaire les normes. Cet metteur ne doit pas tre co-implant ou fonctionner en conjonction avec toute autre antenne ou transmetteur. Le dispositif portatif est conu pour rpondre aux exigences dexposition aux ondes radio tablie par le dveloppement nergtique DURABLE. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body at least 10mm separation distance. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements and should be avoided. Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur SAR la plus leve signale en vertu de cette norme lors de la certification de produit utiliser lorsquil est correctement port sur le corps Au moins 10mm distance de separation. These requirements set a SAR limit of 4W/kg averaged over ten grams of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the limbs. Ces exigences un SAR limite de 4 W/kg en moyenne pour dix gramme de tissu. La valeur SAR la plus leve signale en vertu de cette norme lors de la certification de produit utiliser lorsquil est correctement port sur le membres. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Les dispositifs fonctionnant dans la bande de 5 150 5 250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux.

(Pb)

(Hg)

(Cd)

(Cr+6)

(PBB)

(PBDE) SJ/T 11364 GB/T 26572 GB/T 26572 ROHS 5150-5250MHz:

CMIIT ID: 2023AP7955 KC Compliance Notice

. NCC Compliance Notice 1 30 10 2 2 2 1 BSMI Compliance Notice Osmo Pocket 3 PP-101 Lead

(Pb) Mercury Cadmium

(Hg)

(Cd) Hexavalent chromium

(Cr+6) Polybrominated biphenyls

(PBB) Polybrominated diphenyl ethers (PBDE) nit 1. 0.1 wt % 0.01 wt %

2. 3. 75 4 02-25063320#2722 EU & UK Compliance Notice EU Compliance Statement: SZ DJI Osmo Technology Co., Ltd. hereby declares that this device (Osmo Pocket 3) is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany GB Compliance Statement: SZ DJI Osmo Technology Co., Ltd. hereby declares that this device (Osmo Pocket 3) is in compliance with the essential requirements and other relevant provisions of Radio Equipment Regulations 2017. A copy of the GB Declaration of Conformity is available online at www.dji.com/euro-compliance Declaracin de cumplimiento UE: SZ DJI Osmo Technology Co., Ltd. por la presente declara que este dispositivo (Osmo Pocket 3) cumple los requisitos bsicos y el resto de provisiones relevantes de la Directiva 2014/53/EU. Hay disponible online una copia de la Declaracin de conformidad UE en www.dji.com/euro-compliance Direccin de contacto de la UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany EU-verklaring van overeenstemming: SZ DJI Osmo Technology Co., Ltd. verklaart hierbij dat dit apparaat

(Osmo Pocket 3) voldoet aan de essentile vereisten en andere relevante bepalingen van Richtlijn 2014/53/EU. De EU-verklaring van overeenstemming is online beschikbaar op www.dji.com/euro-compliance Contactadres EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Declarao de conformidade da UE: A SZ DJI Osmo Technology Co., Ltd. declara, atravs deste documento, que este dispositivo (Osmo Pocket 3) est em conformidade com os requisitos essenciais e outras disposies relevantes da Diretiva 2014/53/EU. Existe uma cpia da Declarao de conformidade da UE disponvel online em www.dji.com/euro-

compliance Endereo de contacto na UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Dichiarazione di conformit UE: SZ DJI Osmo Technology Co., Ltd. dichiara che il presente dispositivo

(Osmo Pocket 3) conforme ai requisiti essenziali e alle altre disposizioni rilevanti della direttiva 2014/53/EU. Una copia della dichiarazione di conformit UE disponibile online all'indirizzo Web www.dji.com/euro-

compliance Indirizzo di contatto UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Dclaration de conformit UE : Par la prsente, SZ DJI Osmo Technology Co., Ltd. dclare que cet appareil

(Osmo Pocket 3) est conforme aux principales exigences et autres clauses pertinentes de la directive europenne 2014/53/EU. Une copie de la dclaration de conformit UE est disponible sur le site www.dji.com/euro-compliance Adresse de contact pour l'UE : DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany PRCAUTIONS D'USAGE DE L'APPAREIL Nutilisez pas lappareil dans un hpital, un avion ou un quipement automobile en raison des radiofrquences qui peuvent produire des interfrences Maintenez une distance minimale de 15 cm entre votre appareil et un stimulateur cardiaque pour viter toute interfrence Eloigner les quipements radiolectriques du ventre des femmes enceintes. Eloigner les quipements radiolectriques du bas-ventre des adolescents. Le dbit d'absorption spcifique (DAS) local quantifie l'exposition de l'utilisateur aux ondes lectromagntiques de l'quipement concern. Le DAS maximal autoris est de 2 W/ kg pour la tte et le tronc et de 4 W/ kg pour les membres. La ou les valeurs du dbit d'absorption spcifique des PP-101 DAS tronc: 1.35 W/ kg DAS membres: 1.35 W/ kg EU-Compliance: Hiermit erklrt SZ DJI Osmo Technology Co., Ltd., dass dieses Gert (Osmo Pocket 3) den wesentlichen Anforderungen und anderen einschlgigen Bestimmungen der EU-Richtlinie 2014/53/EU entspricht. Eine Kopie der EU-Konformittserklrung findest du online auf www.dji.com/euro-compliance Kontaktadresse innerhalb der EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

: SZ DJI Osmo Technology Co., Ltd. ,

(Osmo Pocket 3) 2014/53/. www.dji.com/euro-

compliance

: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Prohlen o shod pro EU: Spolenost SZ DJI Osmo Technology Co., Ltd. tmto prohlauje, e tohle zazen (Osmo Pocket 3) vyhovuje zkladnm poadavkm a dalm pslunm ustanovenm smrnice 2014/53/EU. Kopie prohlen o shod pro EU je k dispozici on-line na webu www.dji.com/euro-compliance Kontaktn adresa v EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nmecko EU-overensstemmelseserklring: SZ DJI Osmo Technology Co., Ltd. erklrer hermed, at denne enhed

(Osmo Pocket 3) er i overensstemmelse med de vsentlige krav og andre relevante bestemmelser i direktiv 2014/53/EU. Der er en kopi af EU-overensstemmelseserklringen tilgngelig online p www.dji.com/euro-

compliance EU-kontaktadresse: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland

: SZ DJI Osmo Technology Co., Ltd.

(Osmo Pocket 3) 2014/53/E. www.dji.com/euro-

compliance

: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, ELi vastavuskinnitus Kesolevaga teatab SZ DJI Osmo Technology Co., Ltd., et see seade (Osmo Pocket 3) on koosklas direktiivi 2014/53/EL oluliste nuete ja muude asjakohaste stetega. ELi vastavusdeklaratsiooni koopia on kttesaadav veebis aadressil www.dji.com/euro-compliance Kontaktaadress ELis: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Saksamaa Praneimas dl atitikties ES reikalavimams Bendrov SZ DJI Osmo Technology Co., Ltd. tvirtina, kad is prietaisas (Osmo Pocket 3) atitinka pagrindinius 2014/53/ES direktyvos reikalavimus ir kitas susijusias nuostatas. ES atitikties deklaracijos kopij galite rasti adresu www.dji.com/euro-compliance ES kontaktinis adresas: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany (Vokietija) ES atbilstbas paziojums: SZ DJI Osmo Technology Co., Ltd. ar o apliecina, ka ierce (Osmo Pocket 3) atbilst direktvas 2014/53/ES pamatprasbm un prjiem btiskiem nosacjumiem. ES atbilstbas deklarcijas kopija pieejama tiesaist vietn www.dji.com/euro-compliance ES kontaktadrese: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Vcija EU:n vaatimustenmukaisuusvakuutus: SZ DJI Osmo Technology Co., Ltd. ilmoittaa tten, ett tm laite

(Osmo Pocket 3) on direktiivin 2014/53/EU olennaisten vaatimusten ja sen muiden asiaankuuluvien ehtojen mukainen. Kopio EU:n vaatimustenmukaisuusvakuutuksesta on saatavana verkossa osoitteessa www.dji.com/euro-

compliance Yhteystiedot EU:ssa: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany RITEAS Comhlonta an AE: Dearbhaonn SZ DJI Osmo Technology Co., Ltd. leis seo go bhfuil an glas seo (Osmo Pocket 3) de rir na gceanglas riachtanach agus na bhforlacha bhartha eile sa Treoir 2014/53/AE. T coip de Dhearbh Comhrireachta an AE ar fil ar lne ag www.dji.com/euro-compliance Seoladh teagmhla san AE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Dikjarazzjoni ta Konformit tal-UE: SZ DJI Osmo Technology Co., Ltd. hawnhekk tiddikjara li dan l-

apparat (Osmo Pocket 3) huwa konformi mar-rekwiiti essenzjali u ma dispoizzjonijiet relevanti ora tad-Direttiva 2014/53/UE. Kopja tad-Dikjarazzjoni ta Konformit tal-UE hija disponibbli onlajn fis-sit www.dji.com/euro-compliance Indirizz ta kuntatt tal-UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, il-ermanja Declaraia UE de conformitate: Prin prezenta, SZ DJI Osmo Technology Co., Ltd. declar faptul c acest dispozitiv (Osmo Pocket 3) este conform cu cerinele eseniale i celelalte prevederi relevante ale Directivei 2014/53/UE. Un exemplar al Declaraiei UE de conformitate este disponibil online, la adresa www.dji.com/euro-

compliance Adresa de contact pentru UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germania Izjava EU o skladnosti: Druba SZ DJI Osmo Technology Co., Ltd. izjavlja, da ta naprava (Osmo Pocket 3) ustreza osnovnim zahtevam in drugim ustreznim dolobam Direktive 2014/53/EU. Kopija izjave EU o skladnosti je na voljo na spletu na www.dji.com/euro-compliance Kontaktni naslov EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemija EU Izjava o sukladnosti: Tvrtka SZ DJI Osmo Technology Co. Ltd. izjavljuje da je ovaj (Osmo Pocket 3) ureaj izraen u skladu s osnovnim zahtjevima i ostalim relevantnim odredbama Direktive 2014/53/EU. Kopija EU Izjave o sukladnosti dostupna je na mrenoj stranici www.dji.com/euro-compliance Adresa EU kontakta: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Njemaka Vyhlsenie o zhode E: SZ DJI Osmo Technology Co., Ltd. tmto vyhlasuje, e toto zariadenie (Osmo Pocket 3) je v zhode so zkladnmi poiadavkami a almi relevantnmi ustanoveniami smernice 2014/53/E. Kpia tohto Vyhlsenia o zhode E je k dispozcii online na www.dji.com/euro-compliance Kontaktn adresa v E: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemecko Deklaracja zgodnoci UE: Firma SZ DJI Osmo Technology Co., Ltd. niniejszym owiadcza, e przedmiotowe urzdzenie (Osmo Pocket 3) jest zgodne z zasadniczymi wymogami i innymi stosownymi postanowieniami dyrektywy 2014/53/UE. Kopi deklaracji zgodnoci UE mona znale w Internecie na stronie www.dji.com/euro-compliance Adres do kontaktu w UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Niemcy EU megfelelsgi nyilatkozat: A DJI Osmo Technology Co., Ltd. ezton megersti, hogy ez az eszkz

(Osmo Pocket 3) megfelel a 2014/53/EU Irnyelv alapvet kvetelmnyeinek s ms vonatkoz rendelkezseinek. Az EU megfelelsgi nyilatkozat msolata elrhet a www.dji.com/euro-compliance oldalon EU kapcsolati cm: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nmetorszg EU-frskran om efterlevnad: SZ DJI Osmo Technology Co., Ltd. hrmed frklarar att denna enhet (Osmo Pocket 3) uppfyller de vsentliga kraven och andra relevanta bestmmelser i direktivet 2014/53/EU. En kopia av EU-frskran om efterlevnad finns att tillg online p adressen www.dji.com/euro-

compliance Kontaktadress EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland Yfirlsing um fylgni vi reglur ESB: SZ DJI Osmo Technology Co., Ltd. lsir hr me yfir a etta tki

(Osmo Pocket 3) hlti mikilvgum krfum og rum vieigandi kvum tilskipunar 2014/53/ESB. Nlgast m eintak af ESB-samrmisyfirlsingunni netinu www.dji.com/euro-compliance Heimilisfang ESB-tengiliar: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany AB Uygunluk Beyan: SZ DJI Osmo Technology Co., Ltd. bu belge ile bu cihazn (Osmo Pocket 3) temel gerekliliklere ve 2014/53/EU sayl Direktifin dier ilgili hkmlerine uygun olduunu beyan eder. AB Uygunluk Beyannn bir kopyasna www.dji.com/euro-compliance adresinden evrim ii olarak ulalabilir AB iin iletiim adresi: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Almanya Environmentally friendly disposal Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances. Umweltfreundliche Entsorgung Dies ist das Symbol fr die getrennte Sammlung von Elektro- und Elektronikgerten. Elektroaltgerte drfen nicht zusammen mit dem Restmll entsorgt werden (einschlielich Batterien, Akkus und Lampen), sondern mssen separat entsorgt werden. Die Entsorgung an der kommunalen Sammelstelle durch Privatpersonen oder an den von Hndlern oder Herstellern eingerichteten Sammelstellen ist kostenlos. Der Besitzer von Altgerten ist dafr verantwortlich, die persnlichen oder vertraulichen Daten auf den zu entsorgenden Altgerten zu lschen und die Gerte zu diesen oder hnlichen Sammelstellen zu bringen. Die Hndler sind verpflichtet, Elektroaltgerte fr dich kostenlos zurckzunehmen. Durch diesen geringen Aufwand kannst du zur Wiederverwertung von wertvollen Rohmaterialien beitragen und dafr sorgen, dass umweltschdliche und giftige Substanzen ordnungsgem unschdlich gemacht werden. Tratamiento de residuos responsable con el medio ambiente Los aparatos elctricos viejos no pueden desecharse junto con los residuos orgnicos, sino que deben ser desechados por separado. Existen puntos limpios donde los ciudadanos pueden dejar estos aparatos gratis. El propietario de los aparatos viejos es responsable de llevarlos a estos puntos limpios o similares puntos de recogida. Con este pequeo esfuerzo ests contribuyendo a reciclar valiosas materias primas y al tratamiento de residuos txicos. Mise au rebut cologique Les appareils lectriques usags ne doivent pas tre limins avec les dchets rsiduels. Ils doivent tre limins sparment. La mise au rebut au point de collecte municipal par l'intermdiaire de particuliers est gratuite. Il incombe au propritaire des appareils usags de les apporter ces points de collecte ou des points de collecte similaires. Avec ce petit effort personnel, vous contribuez au recyclage de matires premires prcieuses et au traitement des substances toxiques. Smaltimento ecologico I vecchi dispositivi elettrici non devono essere smaltiti insieme ai rifiuti residui, ma devono essere smaltiti separatamente. Lo smaltimento da parte di soggetti privati presso i punti di raccolta pubblici gratis. responsabilit del proprietario dei vecchi dispositivi portarli presso tali punti di raccolta o punti di raccolta analoghi. Grazie a questo piccolo impegno personale contribuirete al riciclo di materie prime preziose e al corretto trattamento di sostanze tossiche. Milieuvriendelijk afvoeren Oude elektrische apparaten mogen niet worden weggegooid samen met het restafval, maar moeten afzonderlijk worden afgevoerd. Afvoeren via het gemeentelijke inzamelpunt is gratis voor particulieren. De eigenaar van oude toestellen is verantwoordelijk voor het inleveren van de apparaten op deze of vergelijkbare inzamelpunten. Met deze kleine persoonlijke inspanning lever je een bijdrage aan de recycling van waardevolle grondstoffen en de verwerking van giftige stoffen. Eliminao ecolgica Os aparelhos eltricos antigos no podem ser eliminados juntamente com os materiais residuais. Tm de ser eliminados separadamente. A eliminao no ponto de recolha pblico atravs de entidades particulares gratuita. da responsabilidade do proprietrio de aparelhos antigos lev-los a estes pontos de recolha ou a pontos de recolha semelhantes. Com este pequeno esforo pessoal, contribui para a reciclagem de matrias-primas teis e para o tratamento de substncias txicas.

, . Ekologicky etrn likvidace Star elektrick zazen nesmj bt likvidovna spolu se zbytkovm odpadem, ale mus bt likvidovna samostatn. Likvidace na komunlnch sbrnch mstech prostednictvm soukromch osob je bezplatn. Vlastnk starch zazen odpovd za to, e je donese do tchto sbrnch mst nebo na obdobn sbrn msta. Tmto mete pispt k recyklaci hodnotnch surovin a zpracovn toxickch ltek. Miljvenlig bortskaffelse Gamle elektriske apparater m ikke bortskaffes sammen med restaffald, men skal bortskaffes separat. Bortskaffelse p et flles indsamlingssted er gratis for privatpersoner. Ejere af gamle apparater er ansvarlige for at bringe apparater hen til disse indsamlingssteder eller til lignende indsamlingssteder. Med denne lille personlige indsats bidrager du til genanvendelse af vrdifulde rvarer og behandlingen af giftige stoffer.

. Keskkonnasstlik kasutuselt krvaldamine Vanu elektriseadmeid ei tohi ra visata koos olmejtmetega, vaid tuleb koguda ja kasutuselt krvaldada eraldi. Kohaliku omavalitsuse elektroonikaromude kogumispunktis on raandmine eraisikutele tasuta. Vanade seadmete sellistesse vi sarnastesse kogumispunktidesse toimetamise eest vastutavad seadmete omanikud. Selle vikese isikliku panusega aitate kaasa vrtusliku toorme ringlussevtule ja mrgiste ainete ttlemisele. Utilizavimas nekenkiant aplinkai Sen elektrini prietais negalima imesti kartu su buitinmis atliekomis; juos btina utilizuoti atskirai. Toki prietais utilizavimas per komunalinius atliek surinkimo punktus yra nemokamas. Elektrini prietais savininkai utilizuojamus prietaisus privalo priduoti atitinkamus arba analogikus atliek surinkimo punktus. Tokiu bdu, ddami nedaug pastang, prisidsite prie verting mediag perdirbimo ir aplinkos apsaugojimo nuo toksini mediag. Videi draudzga atkritumu likvidana Vecas elektrisks ierces nedrkst likvidt kop ar prjiem atkritumiem, bet ts jlikvid atsevii. Privtpersonm atkritumu likvidana komunlaj savkanas punkt ir bez maksas. Veco ieru panieks ir atbildgs par ieru nogdanu ajos savkanas punktos vai ldzgos savkanas punktos. Ar m nelielm personiskajm plm js veicint vrtgu izejmaterilu prstrdi un toksisko vielu apstrdi. Hvittminen ympristystvllisesti Vanhoja shklaitteita ei saa hvitt kaatopaikkajtteen mukana, vaan ne on hvitettv erikseen. Kunnalliseen keryspisteeseen vieminen on yksityishenkillle ilmaista. Vanhojen laitteiden omistaja vastaa laitteiden toimittamisesta kyseisiin keryspisteisiin tai vastaaviin. Tll vhisell henkilkohtaisella vaivalla edistt omalta osaltasi arvokkaiden raaka-aineiden kierrtyst ja myrkyllisten aineiden ksittely. Discairt neamhdhobhlach don chomhshaol Nor cheart seanghlasanna leictreacha a dhiscairt leis an dramhal iarmharach, ach caithfear iad a chur de limh astu fin. T an discairt ag an ionad bailichin pobail ag daoine probhideacha saor in aisce. T freagracht ar inir seanghlasanna na glasanna a thabhairt chuig na hionaid bhailichin sin n chuig ionaid bhailichin den chinel canna. Le hiarracht bheag phearsanta mar sin, cuidonn t le hamhbhair luachmhara a athchrsil agus le substaint tocsaineacha a chireil Rimi li jirrispetta l-ambjent L-apparat elettriku qadim ma gandux jintrema flimkien ma skart residwu, ida gandu jintrema bmod separat. Ir-rimi fil-post tal-bir komunali minn persuni privati huwa bxejn. Is-sit ta apparat qadim huwa responsabbli biex iib l-apparat fdawn il-postijiet tal-bir jew fpostijiet tal-bir simili. Bdan l-isforz personali gir, inti tikkontribwixxi gar-riikla ta materja prima prezzjua u gat-trattament ta sustanzi tossii. Eliminarea ecologic Aparatele electrice vechi nu trebuie aruncate odat cu deeurile reziduale, ci trebuie eliminate separat. Eliminarea n cadrul punctului de colectare local de ctre persoane fizice este gratuit. Proprietarii de aparate vechi sunt responsabili pentru transportul acestora la respectivele puncte de colectare sau la alte puncte de colectare similare. Prin acest efort personal nesemnificativ, putei contribui la reciclarea materiilor prime valoroase i la tratarea substanelor toxice. Okolju prijazno odlaganje Starih elektrinih aparatov ne smete odvrei skupaj z ostanki odpadkov, temve loeno. Odlaganje na komunalnem zbirnem mestu je za fizine osebe brezplano. Lastnik starih naprav je odgovoren, da jih pripelje do teh ali podobnih zbirnih mest. S tako malo osebnega truda prispevate k recikliranju dragocenih surovin in obdelavi strupenih snovi. Ekoloko odlaganje Stari elektrini ureaji ne smiju se odlagati zajedno s kunim otpadom, ve ih treba odlagati odvojeno. Odlaganje na komunalnom sabirnom mjestu od strane privatnih osoba je besplatno. Vlasnik starih ureaja duan je donijeti ureaje do tih sabirnih mjesta ili slinih sabirnih mjesta. Ovim malim osobnim naporom doprinosite recikliranju vrijednih sirovina i pravilnoj obradi otrovnih tvari. Ekologick likvidcia Star elektrospotrebie sa nesm likvidova spolu so zvykovm odpadom, ale musia sa zlikvidova samostatne. Likvidcia v komunlnom zbernom mieste prostrednctvom skromnch osb je bezplatn. Majite starch spotrebiov je zodpovedn za prinesenie spotrebiov na tieto zbern miesta alebo na podobn zbern miesta. Tmto malm osobnm silm prispievate k recyklovaniu cennch surovn a spracovaniu toxickch ltok Utylizacja przyjazna dla rodowiska Nie mona usuwa starych urzdze elektrycznych wraz z pozostaymi odpadami. Wymagaj one oddzielnej utylizacji. Utylizacja przez osoby prywatne w punkcie zbirki odpadw komunalnych jest darmowa. Waciciel starych urzdze jest odpowiedzialny za dostarczenie ich do takich lub podobnych punktw zbirki. Zadajc sobie tak niewielki trud, przyczyniasz si do recyklingu cennych surowcw i odpowiedniego postpowania z substancjami toksycznymi. Krnyezetbart hulladkkezels A rgi elektromos kszlkeket nem szabad a nem szelektven gyjttt hulladkkal egytt kidobni, hanem a hulladkkezelsket elklntve kell vgezni A kzssgi gyjtpontokon a magnszemlyek ingyenesen leadhatjk ezeket. A rgi kszlkek tulajdonosai felelnek azrt, hogy e kszlkeket ezekre a gyjtpontokra, vagy ms gyjtpontokra elhozzk. Ezzel a kis szemlyes erfesztssel n is hozzjrul az rtkes nyersanyagok jrahasznostshoz s a mrgez anyagok kezelshez. Miljvnlig hantering av avfall Gamla elektriska apparater fr inte kasseras tillsammans med restavfallet utan mste kasseras separat. Kassering p den lokala insamlingsplatsen fr privatpersoner r gratis. garen av gamla apparater ansvarar fr att ta apparaterna till dessa insamlingsplatser eller till liknande insamlingsplatser. Med denna lilla personliga insats bidrar du till tervinning av vrdefulla rvaror och hantering av giftiga mnen. Umhverfisvn frgun Ekki m farga gmlum raftkjum me rgangsleifum, heldur arf a farga eim srstaklega. Frgun almennum sfnunarstum er keypis fyrir einstaklinga. Eigandi gamalla tkja ber byrg a koma me tkin essa sfnunarstai ea svipaa sfnunarstai. Me essu litla persnulega taki stular a endurvinnslu vermtra hrefna og mefer eitrurefna. evre dostu bertaraf Eski elektrikli cihazlar, dier atklarla birlikte bertaraf edilmemeli, ayrca atlmaldr. zel kiiler araclyla genel toplama noktasna bertaraf ilemi cretsiz olarak yaplmaktadr. Eski cihazlarn sahibi, cihazlar bu toplama noktalarna veya benzer toplama noktalarna getirmekten sorumludur. Bu az miktardaki kiisel abayla, deerli ham maddelerin geri dntrlmesine ve toksik maddelerin ileme alnmasna katkda bulunmu olursunuz. This device is restricted to indoor use when operating in the 5150-5250MHz frequency range in all EU/EFTA member states, Trkiye and UK. Im Frequenzbereich 5150-5250 MHz darf dieses Gert in allen EU/EFTA-Mitgliedsstaaten und der Trkei nur innerhalb von Gebuden verwendet werden. El dispositivo est restringido a uso en interiores cuando se opera en el rango de frecuencia de 5150-

5250 MHz en todos los estados miembros de la UE/EFTA y Turqua. Cet appareil est rserv un usage en intrieur dans une plage de frquence de 5 150 5 250 MHz dans tous les pays membres de l'Union Europenne et de l'Association europenne de libre-change, ainsi qu'en Turquie. Il dispositivo limitato allutilizzo indoor quando si utilizza lintervallo di frequenze 5150-5250 MHz in tutti gli stati membri dellUE e AELS e in Turchia.

, 5150-

5250MHz - / . Pouvn tohoto zazen v interiru je omezeno na kmitotov rozsah 51505250 MHz ve vech lenskch sttech EU/EFTA a Turecku. Denne enhed er begrnset til indendrs brug, nr den betjenes i frekvensomrdet 5150-5250 MHz i alle EU-/EFTA-medlemslande og Tyrkiet. 5150-5250MHz / . Kui kasutada sagedusvahemikku 51505250 MHz, tohib EL-i/EFTA riikides ja Trgis kasutada seadet ainult siseruumides. Tm laite on rajoitettu siskyttn, kun sit kytetn 5 1505 250 MHz:n taajuusalueella kaikissa EU/EFTA-jsenmaissa ja Turkissa. Nl cead an glas seo a sid ach amhin taobh istigh agus ag feidhmi lastigh den raon minicochta 5150-5250MHz i ngach ballstt den AE/CSTE agus sa Tuirc. Uporaba ovog ureaj ograniena je na zatvoreni prostor kada radi u frekvencijskom rasponu od 5150 -

5250 MHz u svim dravama lanicama EU-a/EFTA-a i Turskoj. Az 5150-5250 MHz-es frekvenciatartomnyban az eszkz kizrlag beltren hasznlhat az EU/EFTA tagllamokban s Trkorszgban. etta tki er takmarka vi notkun innandyra llum aildarrkjum ESB/EFTA og Tyrklandi, egar a er nota tnisviinu 5150-5250MHz. Visose ES/EFTA valstybse narse ir Turkijoje is prietaisas gali bti naudojamas tik patalpose, kai veikia 51505250 MHz dani diapazone. o ierci viss ES/EBTA dalbvalsts un Turcij drkst lietot tikai iektelps, darbinot to 51505250 MHz frekvenu diapazon. Dan l-apparat huwa ristrett gall-uu fuq ewwa waqt li jkun qed jopera fil-medda ta frekwenza 5150-

5250 MHz fl-Istati Membri kollha tal-UE/EFTA u fit-Turkija. Dit apparaat is beperkt tot gebruik binnenshuis bij gebruik binnen het frequentiebereik van 5150-

5250MHz in alle EU/EVA-lidstaten en Turkije. Urzdzenie to suy do uytku tylko w pomieszczeniach, gdy dziaa w zakresie czstotliwoci 5150 - 5250 MHz, we wszystkich pastwach czonkowskich UE/EFTA i w Turcji. Este dispositivo est limitado utilizao em espaos interiores quando opera na gama de frequncias de 5150-5250 MHz em todos os Estados-Membros da UE/EFTA e na Turquia. Acest dispozitiv este limitat la utilizarea n interior atunci cnd funcioneaz n intervalul de frecven 5150-5250MHz n toate statele membre UE/EFTA i Turcia. Pri prevdzke vo frekvennom rozsahu 5 150 5 250 MHz je toto zariadenie vo vetkch lenskch ttoch E/EFTA a Turecku obmedzen na pouvanie v interiri. Ta pripomoek je v vseh dravah lanicah EU/EFTA in Turiji pri delovanju v frekvennem obmoju 5150 5250 MHz omejen na uporabo v zaprtih prostorih. Denna enhet r begrnsad till inomhusanvndning vid drift i frekvensomrdet 51505250 MHz i alla EU/EFTA-medlemsstater och Turkiet. Tm AB/EFTA ye lkelerinde ve Trkiye'de bu cihazn kullanm, 5150-5250MHz frekans aralnda yalnzca i mekanlarda kullanlmak zere snrlandrlmtr. W52: Indoor use only except for connection to 5.2GHz registered device Thailand Warning message

. Mexico Warning message La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Brazil Warning message Informaes sobre Regulamentao. Este equipamento est certificado e homologado pela ANATEL. Para maiores informaes, consulte o site da ANATEL: www.anatel.gov.br. Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados. Este produto est homologado pela Anatel de acordo com os procedimentos regulamentados para avaliao da conformidade de produtos para telecomunicaes e atende aos requisitos tcnicos aplicados, incluindo os limites de exposio da Taxa de Absoro Especfica referente a campos eltricos, magnticos e eletromagnticos de radiofrequncia. To view the full compliance information, slide down on the camera view, tap the settings icon, and scroll through to select Compliance Info.

e-label information Product name: Osmo Pocket 3 FCC ID: 2ANDR-PP1012023 IC: 23060-PP1012023; HVIN: PP-101 As per KDB784748 D02 e labeling:

A. Information to be displayed 1. The information that will be displayed on the e-label and information that will be remain in the user manual is shown below:

Information ID number 15.19 statement;

RSS-GEN section 8.4 User manual notice Class A / B Digital Device statements Caution to the user that Changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment. E-label Yes Yes No No No User Manual No Yes Yes Yes Yes Images of the e-label screen are provided below:

B. Access to the required information on the e-label 1. Users can access the information in no more than three steps in a devices menu, the actual steps are:

Choose: slide down on the camera view>tap the settings icon> scroll through to select Compliance Info. No special access codes or permissions are required to go througth the above steps bryond entering a user defined password (optional) to protect against unauthorized access to the application. 2. The information is stored on the device, no special accessories or supplemental plug-

in are required to access the information. Yes, it is no special accessories or supplemental required. 3. Users are provided specific instructions on how to access the information. Yes, the details steps are in the user manual. C. Labeling for importation and Purchasing Products utilizing e-labels are required to have a physical label on the product at the time of importation marketing and sales. For devices imported in bilk and not pakage individually, a removable adhesive label or, for devices in protective bags, a label on the bags is acceptable for this purpose. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. For devices imported already in individual packages ready for sales, the information may alternatively be provided on the package. It shall contains:

1. The FCC ID and/or the DoC logo (if applicable); and 2. Any other information required by specific rule to be provided on the surface of the product unless such information is permitted to be included in the users manual or other packaging inserts. The FCC ID is present on the product packaging. Moudel number is present on the product label, packaging label and shipping label. D. Other considerstions 1. The above information must be programmed by the responsible party and the information must be secured in such a manner that thrid-parties cannot modify it. Yes, the e-label information is pre-programmed by grantee and the user cannot modfy it. 2. All the applicable regulatory information required on the packaging or user manual instructions must be provided according to the rules even if it is dispayed electronically. Yes, it is provided in the user manual. Contact Name:

caroline.chan Company Name:

SZ DJI Osmo Technology Co., Ltd. Applicant Signature:

Signature Date:

2023-10-09

Osmo Pocket 3 Model / #23 / #38:

Osmo Pocket 3 HiS8#ht# PP-101 Input/ A /BIA: SV/9V/12V===3A max Powered by Battery: 7.7V ===1300mAh, 10.01Wh CMIIT ID: . - FCC ID: 2ANDR-PP1012023 IC: 23060-PP1012023 CAN ICES-003(B) / NMB-003(B) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

TCB Authority to Act as Agent Number:

Revision:

Effective date: Oct 8, 2021 MS-0045317 0 SZ DJI Osmo Technology Co., Ltd. Authority to Act as Agent Date: __2023-09-18____________ TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern:

I appoint TUV Rheinland (Shenzhen) Co., Ltd. and TUV Engineer to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with SZ SZ DJI Osmo Technology Co., Ltd4F, Jingkou Community Comprehensive Service Building, No. 83 Bishui Road North, Guangming Street, Guangming District, Shenzhen, China. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date:

_2023-09-18_ Agreement is valid for 12 months from the above date. By:

(Signature) __________ ___________Niki Fang_____________

(Print name) __ __________ Compliance Engineer +86 755 26656677______________________

(Title)

(Telephone) On behalf of:

_ SZ SZ DJI Osmo Technology Co., Ltd.

(Company Name) Page 1 of 1

SZ DJI Osmo Technology Co., Ltd. Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 2023-09-18 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: 2ANDR-PP1012023

[SZ DJI Osmo Technology Co., Ltd. ] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely yours, Applicant Signature Printed Name:Niki Fang Title: Compliance Engineer Address: 4F, Jingkou Community Comprehensive Service Building, No. 83 Bishui Road North, Guangming Street, Guangming District, Shenzhen, China Tel.: 0755-26656677 Email: certification@dji.com

SZ DJI Osmo Technology Co., Ltd. Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 2023-09-18 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: 2ANDR-PP1012023

[SZ DJI Osmo Technology Co., Ltd. ] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Niki Fang Title: Compliance Engineer Address: 4F, Jingkou Community Comprehensive Service Building, No. 83 Bishui Road North, Guangming Street, Guangming District, Shenzhen, China Tel.: 0755-26656677 Email: certification@dji.com

SZ DJI Osmo Technology Co., Ltd. Certification Designating a US Agent for Service of Process To: Federal Communications Commission Date: 2023-09-18 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement Part 2.911(d)(7) filing FCC ID: 2ANDR-PP1012023 SZ DJI Osmo Technology Co., Ltd. (the applicant) certifies that as of the date of the filing of the application, DJl Research LLC (the agent) is our designated U.S. agent. We acknowledge the applicants consent and the designated agent for service of processs obligation to accept service of process. The applicant accepts to maintain an agent for service of process for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-

related proceeding involving the equipment. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. APPLICANT Company Name: SZ DJl Osmo Technology Co., Ltd. Contact Person: Niki Fang Address: 4F, Jingkou Community Comprehensive Service Building, No. 83 Bishui Road North, Guangming Street, Guangming District, Shenzhen, China Tel.: 0755-26656677 Email: certification@dji.com FCC FRN: 0026750562 U.S. Agent Company Name: DJI Research LLC Contact Person: JIE SHEN Address: 17301 Edwards Road, Cerritos, CA 90703 Tel.: 310-356-3081 Email: jack.shen@dji.com FCC FRN: 0033569757 Sincerely yours, fF tsisSYT The Applicant The Agent SZ DJl Osmo Technology. Co., Ltd. DJI Research LLC Contact Person JIE SHEN Lsinaire | MMS | er

Request for Confidentiality Letter Number: MS0044715 Revision:

1 Effective date: Sep 12, 2022 Author:

Owner:

William Graff William Graff Legal Scope:

Global Business Scope:

Cross Business Process Scope:

Cross Process SZ DJI Osmo Technology Co., Ltd. Date: 18 Sep 2023 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: 2ANDR-PP1012023 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent n/a Permanent Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photo Internal Photos ***

Operation Description/Theory of Operation Schematics Test Setup***

Users Manual***

Part List/ Antenna Construction Software Security Information SZ DJI Osmo Technology Co., Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public.

(*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:

___________ ______________ _______Niki Fang____________

(Signature/Title)

(Print name) Tel: +86 755 26656677 Email: certification@dji.com MS-0044715 Page 1 of 1 Revision 1