FCC ID: SS3-T202008 AGRAS T20

FCC Compliance Notice(For plane) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class digital device, pursuant to part of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.d. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator &

your body. IC RSS warning This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement:

This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator&

your body. Cet quipement est conforme aux limites d'exposition aux rayonnements RF IC dfinies pour un environnement non contrl. Cet metteur ne doit pas tre colocalis ou fonctionner en conjonction avec une autre antenne ou un autre metteur. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps.

cesT) AGRAS T20 VCE WVA PY 21.od |) CMIIT ID: 2019AP 12121 FCC ID: SS3-T202008 IC: 1805A-T202008 Pe ies YA PCIe cel acy 40s Me] o Roc) geo MD) De ee ga cet Sets aco eT eee kenny ae a Read Sree une & (

Pte Nor irom & ara)

SZ DJI TECHNOLOGY CO., LTD Add: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, China Tel: 0755-86152250 Fax: 0755-86965903 E-mail:certification@dji.com FCC Confidential Authorization Date: 2020-09-18 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: SS3-T202008 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, SZ DJI TECHNOLOGY CO., LTD, hereby requests long-term confidential treatment of information accompanying this application as outlined below:

As well as short-term (secrecy cycle: 180days) confidential treatment of information application as outlined below:

The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Block Diagram Schematics Operation Description Internal Photos Users Manual External Photos Test Set-up Photos Sincerely, Signature Name: wang fajia Title: PM QA-FR-172-A

SZ DJI TECHNOLOGY CO., LTD Add: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, China Tel: 0755-86152250 Fax: 0755-86965903 E-mail:certification@dji.com Date: 2020-09-18 To:

FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: FCC ID: SS3-T202008 declaration of restriction Declaration Dear Sir or Madam, We, SZ DJI TECHNOLOGY CO., LTD, hereby declare that our product AGRAS T20, Model Number: 3WWDZ-15.1B have the ability to work in 2.4G and 5G 4 frequency bands:

5150~5250MHz, 5250~5350MHz, 5470~5725MHz, 5725~5850MHz. For the purpose of marketing, the frequency of the product sold in U.S. are programmed and locked to work only in 5725~5850MHz. The other 5150~5250MHz,5250~5350MHz, 5470~5725MHz are disabled by firmware in factory. The end user or any other parties can not have the capability to activate the other frequency bands. We applied for testing frequency bands:

2403.5~2477.5MHz,2405.5~2476.5MHz,5728.5~5846.5MHz, 5730.5~5844.5MHz for the United States this time in BACL. Please contact me if you have any question. Signature:

Name: wang fajia Title:PM

SZ DJI TECHNOLOGY CO., LTD Add: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, China Tel: 0755-86152250 Fax: 0755-86965903 E-mail:certification@dji.com FCC Authorization Date: 2020-09-18 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We , SZ DJI TECHNOLOGY CO., LTD, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Name: wang fajia Title:PM QA-FR-170-B