FCC ID: SS3-DA2SUE12011 DJI AIR 2S

DJI Air 2S Quick Start Guide

Aircraft

The DJITM Air 2S features a new folding design and a fully stabilized 3-axis gimbal camera capable

of shooting 4K video and 20 MP photos. DJI signature technologies such as Obstacle Sensing and

Intelligent Flight Modes like ActiveTrack 3.0, Point of Interest (POI) 3.0, QuickShots, and

Advanced Pilot Assistance Systems 4.0, make capturing complex shots effortless and easy. The DJI

Air 2S boasts a maximum flight speed of 42.5 mph (68.4 kph) and a maximum flight time* of 31

minutes.

1. Forward Vision System

2. Propellers

3. Motors

4. Landing Gears (Built-in antennas)

5. Gimbal and Camera

6. Downward Vision System

7. Auxiliary Bottom Light

8.

Infrared Sensing System

9. USB-C Port

10. Battery Buckles

11. Front LEDs

12. Aircraft Status Indicators

13. Backward Vision System

14. Intelligent Flight Battery

15. Power Button

16. Battery Level LEDs

17. microSD Card Slot

18. Upward Vision System

Remote Controller

Built into the DJI RC-N1 remote controller is DJI’s long-range transmission technology O-Sync 3.0,

offering a maximum transmission range of 7.45 mi (12 km) and displaying video from the aircraft

to DJI Fly on your mobile device at up to 1080p.

1. Power Button

2. Flight Mode Switch

3. Flight Pause/RTH Button

4. Battery Level LEDs

5. Control Sticks

6. Customizable Button

7. Photo/Video Toggle

8. Remote Controller Cable

9. Mobile Device Holder

10. Antenna

11. USB-C Port

12. Control Sticks Storage Slot

13. Gimbal Dial

14. Shoot/Record Button

15. Mobile Device Slot

Downloading the DJI Fly App

Search for ‘DJI Fly’ in the App Store or Google Play, or scan the QR code to download the app on

your mobile device.

Charging the Batteries

Use the provided charger to fully charge the Intelligent Flight Battery before first time use. Charge

the remote controller via the USB-C port using the provided charger.

Preparing the Remote Controller

1. Attach the control sticks.

2. Pull out the mobile device holder, and then unplug the end with mobile phone mark of the RC

3. Place the mobile device onto the mobile device holder, and plug the RC cable into the mobile

cable.

device.

Preparing the Aircraft

Preparing for Take off

1. Press the power button of the Intelligent Flight Battery once to check the current battery level.

Press once, then again and hold to turn on/off the aircraft.

2. Press the power button of the remote controller once to check the current battery level. Press

once, then again and hold to turn on/off the remote controller.

3. Launch DJI Fly.

When connect an Android mobile device to the remote controller for the first time, select the default

connection settings when there is a prompt.

**Use your DJI account to activate the aircraft. Activation requires an internet connection.

Flight

Remote Controller Operation

Specifications

Aircraft（Model: DA2SUE1）

Operating Temperature

Operating Frequency

Transmitter Power（EIRP）

Remote Controller（Model: RC231）

0° to 40°C

2.4-2.4835 GHz, 5.725-5.850 GHz*

2.4 GHz: ≤30 dBm (FCC), ≤20 dBm (CE), ≤20

dBm (SRRC) , ≤20 dBm (MIC)

5.8 GHz: ≤30 dBm (FCC), ≤14 dBm (CE), ≤29

dBm (SRRC)

Operating Temperature

Transmitter Power（EIRP）

Intelligent Flight Battery

Capacity

Voltage

Battery Type

Energy

Charging Temperature Range

0° to 40°C

2.4G: ≤26 dBm (FCC), ≤20 dBm (CE), ≤20

dBm (SRRC) , ≤20 dBm (MIC)

5.8G: ≤26 dBm (FCC), ≤14 dBm (CE), ≤26

dBm (SRRC)

3500mAh

11.55 V

LiPo 3S

40.42 Wh

5℃ - 40℃

*5.8 GHz is not supported in some regions. Observe the local laws and regulations.

Compliance Information

FCC Compliance Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) This device must accept

any interference received, including interference that may cause undesired operation.

Any changes or modifcations not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information

The aircraft complies with FCC radiation exposure limits set forth for an uncontrolled

environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure

limits, human proximity to the antenna shall not be less than 20cm during normal operation. This

transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

This remote controller complies with FCC radiation exposure limits set forth for an uncontrolled

environment. End user must follow the specifc operating instructions for satisfying RF exposure

compliance. This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

The portable device is designed to meet the requirements for exposure to radio waves established

by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6

W/kg averaged over one gram of tissue.The highest SAR value reported under this standard

during product certifcation for use when properly worn on the body.

ISED Compliance Notice

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,

Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the

following two conditions: (1)This device may not cause interference. (2)This device must accept

any interference, including interference that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR

d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1)L’appareil ne

doit pas produire de brouillage; (2)L’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

This equipment complies with RSS‐102 radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator and your body. This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

Cet équipement est conforme aux limites d'exposition aux radiations CNR‐102 établies pour un

environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance

minimale de 20 cm entre le radiateur et votre corps.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled

environment. End user must follow the specifc operating instructions for satisfying RF exposure

compliance. This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.The portable device is designed to meet the requirements for exposure to

radio waves established by the ISED.

These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest

SAR value reported under this standard during product certifcation for use when properly worn on

the body.

Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur SAR

la plus élevée signalée en vertu de cette norme lors de la certifcation de produit à utiliser lorsqu’il

est correctement porté sur le corps.

KCC Compliance Notice

“해당무선설비는 운용 중 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는

할 수 없습니다 .”

“해당 무선설비는 운용 중 전파혼신 가능성이 있음”

NCC Compliance Notice

取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、

加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合

法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前述合法

通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、

科學及醫療用電波輻射性電機設備之干擾。

注意：

應避免影響附近雷達系統之操作。

高增益指向性天線只得應用於固定式點對點系統。

EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device

is in compliance with the essential requirements and other relevant provisions of the Directive

2014/53/EU.

A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance

EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Déclaration de conformité UE : Par la présente, SZ DJI TECHNOLOGY CO., LTD déclare que

cet appareil est conforme aux principales exigences et autres clauses pertinentes de la directive

européenne 2014/53/EU.

Une copie de la déclaration de conformité UE est disponible sur le site www.dji.com/euro-

compliance

Adresse de contact pour l'UE : DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

PRÉCAUTIONS D'USAGE DE L'APPAREIL

Respect des restrictions d'usage spécifques à certains lieux (hôpitaux, avions, stations-service,

établissements scolaires…).

Précautions à prendre par les porteurs d'implants électroniques (stimulateurs cardiaques, pompes à

insuline, neurostimulateurs…)

concernant notamment la distance entre l'équipement radioélectrique et l'implant (15 centimètres

dans le cas des sources d'exposition les plus fortes comme les téléphones mobiles).

Eloigner les équipements radioélectriques du ventre des femmes enceintes.

Eloigner les équipements radioélectriques du bas-ventre des adolescents.

Le débit d'absorption spécifque (DAS) local quantife l'exposition de l'utilisateur aux ondes

électromagnétiques de l'équipement concerné.

Le DAS maximal autorisé est de 2 W/ kg pour la tête et le tronc et de 4 W/ kg pour les membres.

La ou les valeurs du débit d'absorption spécifque des RC231：

DAS tronc: 1.07 W/ kg

DAS membres: 1.07 W/ kg

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

G'G9xG LE El Tip =

UE f 0 ly 4 (NA SHIEH VNIHD NI SGVW TUT [Ufo ole ley elolul al) mul Teydut_TU hceatolEBt}q@)mul-iutlel-]\ ie A0 vac by amc PLalelc) UIXORD BL'ON Bulpjing uBlseq 4O}ONPUODIWIAS UP BLO MVC IMM OIC We YVAN oL] MUP tno kd G17 "OD ADOIONHDAL Ifa ZS uoljze48do peiisepun Sia -ot1ee pei sole P-L p LU] O10] ola foe LAN = Fo1-9 EvolUr oer sel We l-me (el sovol- me ial Vek o) 7A) Ome Mra 16-2 sole SEE man CUP -1e lial rom ColU C100 oT] oS 10 ah SSUOI}IPUOD OM} HUIMO]|OJ BU} 03 JOeIqns Ss! UOI}eIEdO c-)[als ove = leh oko UL eme Nm) (e Leelee eT] oe Lem PAN es Be hfe ce l@ks|

Ros] a WA@ MG] ND Ata E=1O)N Ibs a b= =P]

SLUYVd DNIAOW SNOGYVZVH NINA OO 0 0 OO OO OOOO ))) VO OVO GY OGY OOO 04 ea Z6Lorv-Z0O0 we)

=lalsyA ier oeO hs!

(=Dyxfolos=1 NIN Wa G=P)x010 ss e= ) he) LLOCLANSCVQG-ESS:d] DD4 V8ZEldVOTO?:dI LIIWD LLOCLANSZVG-VSOS8LL DI UNA @) ale hydeel lest eae NSISM A

:Asayjeg Aq pasaMod la sya Kelas le) Al AARON |]

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name SZ DJI TECHNOLOGY CO., LTD Address 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong 518057 China Grantee Code SS3 FCC ID SS3-DA2SUE12011 Authorized Contact Name fajia Wang Contact Email certification@dji.com Contact Phone +8675586152250 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 11/9/2020 Print Name: fajia Wang Title: PM *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SZ DJI TECHNOLOGY CO., LTDTo: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding: Confidentiality Request regarding application for FCC ID: SS3-DA2SUE12011 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Part Lists Software Security DescriptionThe documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: fajia Wang Title: PM Signature: On behalf of Company: SZ DJI TECHNOLOGY CO., LTD Telephone: +8675586152250 E-mail: certification@dji.com

SZ DJI TECHNOLOGY CO., LTD Date: 11/9/2020 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: SS3-DA2SUE12011 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with SZ DJI TECHNOLOGY CO., LTD This authorization is valid until further written notice from the applicant. Print Name: fajia Wang Title: PM Signature: On behalf of Company: SZ DJI TECHNOLOGY CO., LTD Telephone: +8675586152250 E-mail: certification@dji.com