Mavic 3 Cine Quick Start Guide v1.0 2021.07 Aircraft The MAVICTM 3 features Omnidirectional Obstacle Sensing, an Infrared Sensing System, and a fully stabilized 3-axis gimbal with both telephoto and wide camera that can shoot up to 5.2K video and 20-megapixel photos. DJI signature technologies such as Obstacle Avoidance and Intelligent Flight Modes like HyperLapse, ActiveTrack, QuickShot, Panorama, and Advanced Pilot Assistance Systems, help you capture complex shots effortlessly. 1. Gimbal and Camera A. Telephoto Camera B. Wide Camera Forward Vision System Infrared Sensing System Front LEDs 2. 3. Backward Vision System 4. Auxiliary Bottom Light 5. Downward Vision System 6. 7. 8. Motors 9. Propellers 10. Aircraft Status Indicator 11. Landing Gear (antennas included) 12. Upward Vision System 13. Intelligent Flight Battery 14. Battery Level LEDs 15. Power Button 16. Battery Buckles 17. Charging/Upgrading Port (USB-C) 18. microSD Card Slot Remote Controller The DJI Smart Controller V2.0 features O3, the latest version of DJIs signature OCUSYNCTM image transmission technology, and can transmit a live HD view from the camera of an aircraft at a distance of up to 15 km. Users can connect to the internet via Wi-Fi or by using a 4G dongle and the Android operating system comes with a variety of functions such as Bluetooth and GNNS. The built-in 5.5-in high brightness 1000 cd/m2 screen boasts a resolution of 19201080 pixels while the remote controller comes with a wide range of aircraft and gimbal controls as well as customizable buttons and has a maximum operating time of 3 hours. Flight Pause Button Flight Mode Switch 1. Antennas 2. Back Button/Function Button 3. Control Sticks 4. RTH Button 5. 6. 7. 5D Button 8. Power Button 9. Confirm Button/Customizable Button C3 10. Touchscreen 11. microSD Card Slot 12. USB-C Port 13. Mini HDMI Port 14. Gimbal Dial 15. Record Button 16. Status LED 17. Battery Level LEDs 18. Focus/Shutter Button 19. Camera Settings Dial 20. Air Vent 21. Control Sticks Storage Slots 22. Customizable C1 Button 23. Speaker 24. Customizable C2 Button 25. Air Intake Download the DJI Fly App and Watching Tutorial Videos Charging the Batteries Checking the Battery Levels and Powering On/Off Press once to check the battery level. Press, then press and hold to turn on/off. Preparing the Aircraft 1. Unfold the front arms and the propellers. 2. Unfold the rear arms and the propellers. 3. Match the propellers to motors. Press the propellers down firmly and rotate in the lock direction. Marked Unmarked 4. Unfolded Unfold the front arms and the propellers before the rear ones. All arms and propellers must be unfolded before takeoff. Preparing the Remote Controller 1. Remove the control sticks from the storage slots, then attach the control sticks. 2. Unfold the antennas. Ensure the control sticks are firmly mounted. Preparing for Takeoff 1. Power on the remote controller 2. Power on the aircraft 3. Launch DJI Fly App Flight Remote Controller Operation Specifications Aircraft (Model: L2P/L2A) Takeoff Weight Max Flight Time 920 g 46 minutes (0 wind while flying at a consistent 15.5 mph (25 kph)) Operating Temperature 14 to 104F (-10 to 40C) Operating Frequency Transmitter Power 2.400-2.4835 GHz; 5.725-5.850 GHz 2.4GHz: 28.83 dBm (FCC), 20 dBm (CE/SRRC/MIC) 5.8GHz: 29.9 dBm (FCC), 14 dBm (CE), 29 dBm (SRRC) WiFi Direct, Wi-Fi Display, 802.11b/a/g/n/ac/ax 22 MIMO 2.400-2.4835 GHz; 5.725-5.850 GHz 2.4 GHz: 20.11 dBm (FCC); 18.5 dBm (CE/SRRC/MIC/KCC) 5.8 GHz: 19.11 dBm (FCC/SRRC); 12.5 dBm (CE/KCC) Wi-Fi Protocol Operation Frequency Transmission Power Bluetooth Protocol Operation Frequency Transmission Power Camera Sensor Lens Bluetooth 5.1 2.400-2.4835 GHz 5.98 dBm Telephoto Camera 1/2 CMOS; Effective pixels: 12M Wide Camera 4/3 CMOS; Effective pixels: 20M Telephoto Camera FOV: 15 35mm format equivalent: 160 mm Aperture: f/4.4 Focus: 3 m to Wide Camera FOV: 84 35mm format equivalent: 24 mm Aperture: f/2.8-f/11 Focus: 1 m to ISO Range Telephoto Camera Video: 100-3200 (auto) Photo: 100-3200 (auto) Wide Camera Video: 100-6400 Photo: 100-3200 (auto), 100-12800 (manual) Shutter Speed Telephoto Camera Electronic: 1-1/8000 s Wide Camera Mechanic: 8-1/2000 s Electronic: 8-1/8000 s Remote Controller (Model: RM510) Weight Approx. 750 g 18650 Li-ion (5000 mAh @ 7.2 V) Battery OcuSync 3.0 Operation Frequency Transmission Power Wi-Fi Protocol Operation Frequency Transmission Power 2.400-2.4835 GHz; 5.725-5.850 GHz 2.4GHz: 31.5 dBm (FCC), 20 dBm (CE/SRRC/MIC) 5.8GHz: 32 dBm (FCC), 14 dBm (CE), 21 dBm (SRRC) WiFi Direct, Wi-Fi Display, 802.11b/a/g/n/ac/ax 22 MIMO 2.400-2.4835 GHz; 5.725-5.850 GHz 2.4 GHz: 23 dBm (FCC); 18.5 dBm (CE/SRRC/MIC/KCC) 5.8 GHz: 24 dBm (FCC/SRRC); 12.5 dBm (CE/KCC) Bluetooth Protocol Operation Frequency Transmission Power Capacity Intelligent Flight Battery Battery Type Energy Bluetooth 5.1 2.400-2.4835 GHz 6 dBm 5000 mAh LiPo 4S 77 Wh Charging Temperature 41 to 113F (5 to 45C) Max Charging Power 88 W For more information, read the User Manual: http://www.dji.com/mavic-3 This content is subject to change without prior notice. FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. ISED compliance statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference. device.
(2) This device must accept any interference, including interference that may cause undesired operation of the Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. For Aircraft (Model: L2P/L2A) This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Cet quipement est conforme aux limites d'exposition aux radiations FCC/IC CNR-102 tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20cm entre le radiateur et votre corps. For Remote Controller (Model: RM510) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 4W/kg averaged over 10 gram of tissue. The highest SAR value reported under this standard during product certification for extremity condition. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 4W/kg averaged over 10 gram of tissue. The highest SAR value reported under this standard during product certification for extremity condition. Cet quipement est conforme aux limites d'exposition aux rayonnements de l'ised pour les environnements non contrls.L'utilisateur final doit se conformer des instructions d'exploitation spcifiques afin de respecter la conformit l'exposition aux radiofrquences.Cet metteur ne doit pas tre au mme endroit ni fonctionner avec une autre antenne ou un autre metteur.