FCC ID: SS3-MT3M3VZ DJI Mini 3 Pro

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6549273.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case SAFETY GUIDELINES SICHERHEITSVORSCHRIFTEN CONSIGNES DE SCURIT v1.0 2022.04 DJI RC EN Safety at a Glance By using this product, you signify that you have read, understand, and accept the terms and conditions here. EXCEPT AS EXPRESSLY PROVIDED IN AFTER-SALES SERVICE POLICIES AVAILABLE AT (http://www.dji.com/service), THE PRODUCT AND ALL MATERIALS AND CONTENT AVAILABLE THROUGH THE PRODUCT ARE PROVIDED "AS IS" AND ON "AS AVAILABLE BASIS" WITHOUT WARRANTY OR CONDITION OF ANY KIND. This product is not intended for children. 1. Flight Environment DO NOT use the aircraft in severe weather conditions including heavy wind exceeding 10.7 m/s, snow, rain, fog, hail, or lightning. Fly the aircraft below 4,000 m (13,123 ft.) above sea level. DO NOT fly the aircraft in environments where the temperature is below -10 C (14 F) or above 40 C (104 F). DO NOT take off from moving objects such as cars, ships, and airplanes. DO NOT fly close to reflective surfaces such as water or snow. Otherwise, the vision system may be limited. When the GNSS signal is weak, fly the aircraft in environments with good lighting and visibility. Low ambient light may cause the vision system to work abnormally. DO NOT fly the aircraft near areas with magnetic or radio interference, including Wi-Fi hotspots, routers, Bluetooth devices, high-voltage lines, large scale power transmission stations, radar stations, mobile base stations, and broadcasting towers. Be careful when taking off in the desert or from a beach to avoid sand entering the aircraft. Fly the aircraft in open areas. Buildings, mountains, and trees may block the GNSS signal and affect the on-board compass. 2. Flight Operation Stay away from rotating propellers and motors. Make sure the aircraft batteries, remote controller, and the mobile device are fully charged. Be familiar with the selected flight mode and understand all safety functions and warnings. Make sure DJITM Fly and aircraft firmware have been updated to the latest version. Land the aircraft in a safe location when there is a low battery or high wind warning. Use the remote controller to control the speed and altitude of the aircraft to avoid collisions during Return-to-Home. 1 3. Battery Safety Notice DO NOT allow liquid to come into contact with the batteries. DO NOT leave batteries covered in moisture or out in the rain. DO NOT drop the batteries into water. Otherwise, an explosion or fire may occur. DO NOT use non-DJI batteries. It is recommended to use DJI chargers. DO NOT use swollen, leaking, or damaged batteries. In such situations, contact DJI or a DJI authorized dealer. The batteries should be used at a temperature between -10 to 40 C (14 to 104 F). High temperatures can cause an explosion or fire. Low temperatures will reduce the performance of a battery. DO NOT disassemble or pierce the battery in any way. The electrolytes in the battery are highly corrosive. If any electrolytes come into contact with your skin or eyes, immediately wash the affected area with water and seek medical support. Keep the batteries out of the reach of children and animals. DO NOT use a battery if it is involved in a crash or heavy impact. Extinguish any battery fire using water, sand, or a dry powder fire extinguisher. DO NOT charge the battery immediately after flight. The battery temperature may be too high and may cause serious damage to the battery. Allow the battery to cool down to close to room temperature before charging. Charge the battery at a temperature range of 5 to 40 C (41 to 104 F). The ideal charging temperature range is 22 to 28 C (72 to 82 F). Charging at the ideal temperature range can prolong battery life. DO NOT leave the batteries near heat sources such as a furnace or heater or inside a vehicle on a hot day. DO NOT store the battery for an extended period after fully discharging. Otherwise, the battery may over-discharge and cause irreparable damage to the battery cell. If a battery with a low power level has been stored for an extended period, the battery will enter deep hibernation mode. Recharge the battery to bring it out of hibernation. Specifications Aircraft (Model: MT3M3VD) Takeoff Weight

<249 g Operating Temperature

-10 to 40 C (14 to 104 F) O3 Operating Frequency 2.400-2.4835 GHz, 5.725-5.850 GHz Transmitter Power (EIRP) 2.4 GHz: <26 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5.8 GHz: <26 dBm (FCC/SRRC), <14 dBm (CE) Wi-Fi Protocol 802.11a/b/g/n/ac Operating Frequency 2.400-2.4835 GHz, 5.725-5.850 GHz Transmitter Power (EIRP) 2.4 GHz: <19 dBm (FCC/CE/SRRC/MIC) 5.8 GHz: <20 dBm (FCC/SRRC), <14 dBm (CE) 2 Bluetooth Protocol Bluetooth 5.2 Operating Frequency 2.400-2.4835 GHz Transmitter Power (EIRP)

< 8 dBm Remote Controller DJI RC (Model: RM330) Operating Temperature

-10 to 40 C (14 to 104 F) DJI Mini 3 Pro: O3 Operating Frequency 2.400-2.4835 GHz, 5.725-5.850 GHz Transmitter Power (EIRP) 2.4 GHz: <26 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5.8 GHz: <26 dBm (FCC), <14 dBm (CE), <23 dBm (SRRC) Wi-Fi Protocol 802.11a/b/g/n Operating Frequency 2.400-2.4835 GHz, 5.150-5.250 GHz, 5.725-5.850 GHz Transmitter Power (EIRP) 5.1 GHz: <23 dBm (FCC/CE/SRRC/MIC) 5.8 GHz: <23 dBm (FCC/SRRC), <14 dBm (CE) 2.4 GHz: <23 dBm (FCC), <20 dBm (CE/SRRC/MIC) Bluetooth Protocol Bluetooth 4.2 Operating Frequency 2.400-2.4835 GHz Transmitter Power (EIRP)

<10 dBm Intelligent Flight Battery (Model: BWX162-2453-7.38) Charging Temperature 5 to 40 C (41 to 104 F) Li-ion LiNiMnCoO2 2453 mAh 37 W 7.38 V DJI 30W USB-C Charger or other USB Power Delivery charger Battery Type Chemical System Capacity Max Charging Power Standard Voltage Support Charger CHS https://www.dji.com/mini-3-pro/

downloads DJITM 3 1. 10.7 m/s 4000

-10 40 GNSS Wi-Fi GNSS 2. DJI Fly App 3. DJI DJI DJI

-10 40 5 4022 28 4

( MT3M3VD) O3

(EIRP) Wi-Fi

(EIRP)

(EIRP) DJI RC ( RM330 DJI Mini 3 Pro: O3

(EIRP) Wi-Fi

(EIRP)

<249 g

-10 40 2.400-2.4835 GHz; 5.725-5.850 GHz 2.4 GHz< 26 dBm (FCC), < 20 dBm (CE/SRRC/MIC) 5.8 GHz< 26 dBm (FCC/SRRC), < 14 dBm (CE) 802.11a/b/g/n/ac 2.400-2.4835 GHz; 5.725-5.850 GHz 2.4 GHz< 19 dBm (FCC/CE/SRRC/MIC) 5.8 GHz< 20 dBm (FCC/SRRC), < 14 dBm (CE) 5.2 2.400-2.4835 GHz

< 8 dBm

-10 40 2.400-2.4835 GHz; 5.725-5.850 GHz 2.4 GHz< 26 dBm (FCC), < 20 dBm (CE/SRRC/MIC) 5.8 GHz< 26 dBm (FCC), < 23 dBm (SRRC), < 14 dBm (CE) 802.11a/b/g/n 2.400-2.4835 GHz; 5.150-5.250 GHz; 5.725-5.850 GHz 2.4 GHz< 23 dBm (FCC), < 20 dBm (CE/SRRC/MIC) 5.1 GHz< 23 dBm (FCC/CE/SRRC/MIC) 5.8 GHz< 23 dBm (FCC/SRRC), < 14 dBm (CE) 4.2 2.400-2.4835 GHz

(EIRP)

< 10 dBm

( BWX162-2453-7.38) 5 40 5 Li-ion 2453 mAh 37 W 7.38 V DJI 30W USB-C USB PD DE Sicherheitsvorschriften auf einen Blick Durch die Verwendung dieses Produkts erklrst du, dass du die Allgemeinen Geschftsbedingungen gelesen und verstanden hast und sie akzeptierst. SOFERN NICHT AUSDRCKLICH IN DEN KUNDENDIENSTRICHTLINIEN VORGESEHEN, DIE UNTER (www.dji.com/service) VERFGBAR SIND, WERDEN DAS PRODUKT UND ALLE MATERIALIEN UND INHALTE, DIE BER DAS PRODUKT VERFGBAR SIND, OHNE GARANTIE UND OHNE BEDINGUNGEN JEGLICHER ART BEREITGESTELLT. Dieses Produkt ist nicht fr Kinder bestimmt und darf nicht von Kindern verwendet werden. 1. Flugumgebung Das Fluggert darf NICHT bei widrigen Wetterverhltnissen eingesetzt werden, z. B. bei starkem Wind ber 10,7 m/s, Schnee, Regen, Nebel, Hagel oder Gewitter. Das Fluggert sollte unter 4.000 m ber NHN geflogen werden. Das Fluggert NICHT in Umgebungen mit Temperaturen unter -10 C oder ber 40 C fliegen. NICHT von sich bewegenden Objekten wie Autos, Schiffen und Flugzeugen abheben. Das Fluggert NICHT in der Nhe von reflektierenden Flchen, wie z. B. Wasser oder Schnee fliegen. Die Sichtsensoren knnten sonst eingeschrnkt sein. Flieg das Fluggert nur in Umgebungen mit guten Licht- und Sichtbedingungen, falls das GNSS-Signal schwach ist. Schlechte Lichtverhltnisse knnen dazu fhren, dass die Sichtsensoren fehlerhaft arbeiten. Das Fluggert NICHT in der Nhe von Bereichen mit magnetischen Strungen oder Funkstrungen fliegen, insbesondere nicht in der Nhe von Wi-Fi-Hotspots, Routern, Bluetooth-Gerten, Hochspannungsleitungen, groen Umspannstationen, Radarstationen, mobilen Basisstationen und Funkmasten. Vorsicht beim Starten in der Wste oder von einem Strand aus, damit kein Sand in das Fluggert eindringt. Das Fluggert in offenen Bereichen fliegen. Gebude, Berge und Bume knnen das GPS-

Signal blockieren und den internen Kompass stren. 2. Flugbetrieb Halte dich von den rotierenden Propellern und Motoren fern. Stell sicher, dass die Akkus fr Fluggert, Fernsteuerung und Mobilgert vollstndig geladen sind. 6 Du musst mit dem ausgewhlten Flugmodus vertraut sein sowie alle Sicherheits- und Warnfunktionen kennen und verstehen. Vergewisser dich, dass die Firmware des Fluggerts und die DJITM Fly App auf dem aktuellen Stand sind. Das Fluggert an einem sicheren Ort landen, wenn eine Warnung wegen niedrigem Akkustand oder hoher Windgeschwindigkeit angezeigt wird. Mit der Fernsteuerung lsst sich whrend der automatischen Rckkehr die Geschwindigkeit und Flughhe des Fluggerts steuern, um eine Kollision zu vermeiden. 3. Hinweis zur Sicherheit des Akkus KEINE Flssigkeiten in Kontakt mit dem Akku kommen lassen. Die Akkus von Feuchtigkeit fernhalten und NICHT drauen im Regen liegen lassen. Tauch die Akkus NICHT unter Wasser. Ansonsten kann dies zu einer Explosion oder zu einem Brand fhren. Verwende KEINE Akkus, die nicht von DJI stammen. Es wird empfohlen, Ladegerte von DJI zu verwenden. Aufgeblhte, undichte und beschdigte Akkus drfen KEINESFALLS verwendet werden. Es wird empfohlen, sich in solchen Situationen an DJI oder an einen DJI-Vertragshndler zu wenden. Die Akkus mssen bei einer Temperatur zwischen -10 C und 40 C verwendet werden. Hhere Temperaturen knnen eine Explosion oder einen Brand verursachen. Niedrigere Temperaturen reduzieren die Leistung des Akkus. Zerleg oder durchbohr den Akku NICHT. Die Elektrolyte im Akku sind stark tzend. Wenn Elektrolyte mit Haut oder Augen in Kontakt kommen, den betroffenen Bereich sofort mit Wasser grndlich aussplen, und dann unverzglich einen Arzt aufsuchen. Bewahr die Akkus auerhalb der Reichweite von Kindern und Tieren auf. Akkus NICHT nach Abstrzen oder heftigen Sten verwenden. Brennende Akkus mssen mit Wasser, Sand oder einem Trockenpulver-Feuerlscher gelscht werden. Den Akku NICHT sofort nach einem Flug aufladen. Die Akkutemperatur knnte zu hoch sein und zu schweren Schden am Akku fhren. Den Akku vor dem Aufladen bis auf Raumtemperatur abkhlen lassen. Der Akku sollte in einem Temperaturbereich von 5 C bis 40 C aufgeladen werden. Die ideale Ladetemperatur liegt zwischen 22 C und 28 C. Wird der Akku im idealen Temperaturbereich aufgeladen, kann die Lebensdauer des Akkus verlngert werden. Leg den Akku NICHT in der Nhe von Wrmequellen ab, wie z. B. fen oder Heizungen, und lass den Akku an heien Tagen mit hohen Temperaturen nicht in einem Fahrzeug liegen. Den Akku NICHT ber einen lngeren Zeitraum lagern, nachdem er vollstndig entladen wurde. Andernfalls kann der Akku eine Tiefentladung erleiden und die Akkuzelle irreversibel beschdigt werden. Wenn ein Akku mit niedrigem Akkustand ber einen lngeren Zeitraum aufbewahrt wurde, geht der Akku in den tiefen Ruhezustand ber. Lade den Akku erneut auf, um ihn aus dem Ruhezustand zu bringen. 7 Technische Daten Fluggert (Modell: MT3M3VD) Startgewicht

<249 g Betriebstemperatur

-10 C bis 40 C O3 Betriebsfrequenz 2,400-2,4835 GHz; 5,725-5,850 GHz Strahlungsleistung (EIRP) 2,4 GHz: <26 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5,8 GHz: <26 dBm (FCC/SRRC), <14 dBm (CE) Wi-Fi Protokoll 802.11a/b/g/n/ac Betriebsfrequenz 2,400-2,4835 GHz; 5,725-5,850 GHz Strahlungsleistung (EIRP) 2,4 GHz: <19 dBm (FCC/CE/SRRC/MIC) 5,8 GHz: <20 dBm (FCC/SRRC), <14 dBm (CE) Bluetooth Protokoll Bluetooth 5.2 Betriebsfrequenz 2,400-2,4835 GHz Strahlungsleistung (EIRP)

<8 dBm Fernsteuerung DJI RC (Modell: RM330) Betriebstemperatur

-10 C bis 40 C DJI Mini 3 Pro: O3 Betriebsfrequenz 2,400-2,4835 GHz; 5,725-5,850 GHz Strahlungsleistung (EIRP) 2,4 GHz: <26 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5,8 GHz: <26 dBm (FCC), <14 dBm (CE), <23 dBm (SRRC) Wi-Fi Protokoll 802.11a/b/g/n Betriebsfrequenz 2,400-2,4835 GHz; 5,150-5,250 GHz; 5,725-5,850 GHz Strahlungsleistung (EIRP) 2,4 GHz: <23 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5,1 GHz: <23 dBm (FCC/CE/SRRC/MIC) 5,8 GHz: <23 dBm (FCC/SRRC), <14 dBm (CE) Bluetooth Protokoll Bluetooth 4.2 Betriebsfrequenz 2,400-2,4835 GHz Strahlungsleistung (EIRP)

<10 dBm Intelligent Flight Battery (Modell: BWX162-2453-7.38) Ladetemperatur 5 C bis 40 C Akkutyp Li-Ionen Chemische Zusammensetzung LiNiMnCoO2 Kapazitt Max. Ladeleistung Standardspannung 2.453 mAh 37 W 7,38 V Untersttzte Ladegerte DJI 30W USB-C Ladegert oder eine anderes USB-Power-Delivery-Ladegert 8 FR Scurit Aperu En utilisant ce produit, vous confirmez que vous avez lu, compris et accept les conditions gnrales nonces ici. LEXCEPTION DE CE QUI A T EXPRESSMENT PRVU DANS LES POLITIQUES DU SERVICE APRS-

VENTE (DISPONIBLES SUR http://www.dji.com/service), LE PRODUIT ET TOUS SES MATRIAUX, AINSI QUE TOUT LE CONTENU DISPONIBLE VIA LE PRODUIT SONT FOURNIS EN LTAT ET SELON DISPONIBILIT , SANS GARANTIE NI CONDITION DAUCUNE SORTE. Ce produit nest pas destin aux enfants. 1. Environnement de vol Nutilisez PAS lappareil par mauvais temps, notamment en cas de vent violent de plus de 10,7 m/s, de neige, de pluie, de brouillard, de grle ou dclairs. Faites voler lappareil en de de 4 000 m (13 123 pi) au-dessus du niveau de la mer. NE faites PAS voler lappareil dans des environnements o la temprature est infrieure

-10 C (14 F) ou suprieure 40 C (104 F). NE faites PAS dcoller lappareil partir dobjets en mouvement tels que des voitures, des bateaux et des avions. NE volez PAS proximit de surfaces rflchissantes telles que leau ou la neige. Sinon, le systme optique pourrait tre entrav. Lorsque le signal GNSS est faible, ne pilotez lappareil que dans des environnements bien clairs et offrant une bonne visibilit. Une faible lumire ambiante peut entraner un fonctionnement anormal du systme optique. NE faites PAS voler lappareil proximit de zones prsentant des interfrences magntiques ou radio, notamment les points daccs Wi-Fi, les routeurs, les dispositifs Bluetooth, les lignes haute tension, les grandes centrales lectriques, les stations radars, les stations de base mobiles et les tours de radiodiffusion. Faites attention lorsque vous dcollez dans le dsert ou depuis une plage afin dviter que du sable ne pntre dans lappareil. Faites voler lappareil dans des zones dgages. Les btiments, montagnes et arbres peuvent bloquer le signal GNSS et affecter le fonctionnement du compas intgr. 2. Opration de vol Tenez-vous distance des hlices en rotation et des moteurs. Assurez-vous que les batteries de lappareil, de la radiocommande et du dispositif mobile sont compltement charges. Familiarisez-vous avec le mode de vol slectionn et lensemble des avertissements et fonctions de scurit. 9 Assurez-vous de disposer de la dernire version de lapplication DJITM Fly et du firmware de lappareil. Faites atterrir lappareil un endroit sr en cas davertissement de batterie faible ou de vent violent. Contrlez la vitesse et laltitude de lappareil laide de la radiocommande pour viter toute collision lors de la procdure Return-to-Home. 3. Avis de scurit concernant la batterie NE laissez PAS de liquides entrer en contact avec les batteries. NE laissez PAS les batteries couvertes dhumidit ou sous la pluie. NE laissez PAS tomber les batteries dans leau. dfaut, une explosion ou un incendie pourrait se produire. Nutilisez PAS de batterie non DJI. Il est recommand dutiliser les chargeurs DJI. Nutilisez PAS de batteries gonfles, endommages ou qui fuient. Dans de tels cas, contactez DJI ou un revendeur agr DJI. Les batteries doivent tre utilises des tempratures comprises entre -10 et 40 C. Des tempratures leves peuvent provoquer une explosion ou un incendie. Des tempratures basses rduiront les performances de la batterie. NE dmontez PAS et NE percez PAS la batterie de quelque manire que ce soit. Les lectrolytes de la batterie sont extrmement corrosifs. En cas de contact dlectrolytes avec la peau ou les yeux, lavez immdiatement la zone affecte leau, puis consultez immdiatement un mdecin. Conservez la batterie hors de porte des enfants et des animaux domestiques. Nutilisez PAS une batterie si elle reoit un choc important ou si elle tombe. Si la batterie prend feu, teignez lincendie en utilisant de leau, du sable ou un extincteur poudre sche. NE rechargez PAS la batterie immdiatement aprs un vol. La temprature de la batterie pourrait tre trop leve et pourrait svrement endommager la batterie. Laissez la batterie refroidir temprature ambiante avant de la charger. Chargez la batterie de vol dans une plage de tempratures comprises entre 5 et 40 C (41 104 F). La plage de tempratures de recharge idale est de 22 28 C (72 82 F). Rechargez la batterie dans une plage de tempratures idale peut prolonger son autonomie. NE laissez PAS la batterie prs dune source de chaleur comme une chaudire, un radiateur, ou dans un vhicule par une chaude journe. NE stockez PAS la batterie pendant une priode prolonge si compltement dcharge. Une dcharge excessive de la batterie risque dendommager dfinitivement la cellule de batterie. Si une batterie ayant un faible niveau de puissance a t stocke pendant une priode prolonge, elle passe en mode Hibernation. Rechargez la batterie pour dsactiver le mode Hibernation. 10 Caractristiques techniques Appareil (modle : MT3M3VD) Poids au dcollage

< 249 g Temprature de fonctionnement de -10 40 C O3 Frquence de fonctionnement 2,400 2,4835 GHz ; 5,725 5,850 GHz Puissance de lmetteur

(EIRP) 2,4 GHz : < 26 dBm (FCC), < 20 dBm (CE/SRRC/MIC) 5,8 GHz : < 26 dBm (FCC/SRRC), < 14 dBm (CE) Wi-Fi Protocole 802.11a/b/g/n/ac Frquence de fonctionnement 2,400 2,4835 GHz ; 5,725 5,850 GHz Puissance de lmetteur (EIRP) 2,4 GHz : < 19 dBm (FCC/CE/SRRC/MIC) 5,8 GHz : < 20 dBm (FCC/SRRC), <14 dBm (CE) Bluetooth Protocole Bluetooth 5.2 Frquence de fonctionnement 2,400 2,4835 GHz Puissance de lmetteur (EIRP)

< 8 dBm Radiocommande DJI RC (modle : RM330) Temprature de fonctionnement

-10 40 C DJI Mini 3 Pro: O3 Frquence de fonctionnement 2,400 2,4835 GHz ; 5,725 5,850 GHz Puissance de lmetteur (EIRP) Wi-Fi Protocole Frquence de fonctionnement Puissance de lmetteur (EIRP) 2,4 GHz : < 26 dBm (FCC), < 20 dBm (CE/SRRC/

MIC) 5,8 GHz : < 26 dBm (FCC) ; < 14 dBm (CE) ;

< 23 dBm (SRRC) 802.11a/b/g/n 2,400-2,4835 GHz ; 5,150-5,250 GHz ; 5,725-

5,850 GHz 2,4 GHz : < 23 dBm (FCC), < 20 dBm (CE/SRRC/

MIC) 5,1 GHz : < 23 dBm (FCC/CE/SRRC/MIC) 5,8 GHz : < 23 dBm (FCC/SRRC), <14 dBm (CE) Bluetooth Protocole Bluetooth 4.2 Frquence de fonctionnement 2,400 2,4835 GHz Puissance de lmetteur (EIRP)

< 10 dBm Batterie de Vol Intelligente (modle : BWX162-2453-7.38) Temprature en recharge Type de batterie Systme chimique Capacit Puissance de recharge max. Tension standard Chargeur de soutien 11 de 5 40 C Li-ion LiNiMnCoO2 2 453 mAh 37 W 7,38 V Chargeur USB-C DJI de 30 W ou autre chargeur USB Power Delivery RU

http://www.dji.com/service),

- . 1.

, , , 10,7 /. 4000 . 10 40 C.

, Wi-Fi, , Bluetooth,

. 2.

. 12

, DJITM Fly.

, . 3. . DJI. DJI.

. DJI DJI. 10 40 C.

. 5 40 C. 22 28 .

, . 13

(: MT3M3VD)

< 249 10 40 C O3 2,4002,4835

() 2,4 : < 26 (FCC), < 20 (CE/SRRC/MIC) Wi-Fi 802.11a/b/g/n/ac 2,4002,4835

() 2,4 : < 19 (FCC/CE/SRRC/MIC) Bluetooth Bluetooth 5.2 2,4002,4835

() < 8 DJI RC (: RM330) 10 40 C DJI Mini 3 Pro: O3 2,4002,4835

() 2,4 : < 26 (FCC), < 20 (CE/SRRC/MIC) Wi-Fi 802.11a/b/g/n 2,4002,4835 5,150-5,250 ( )

() 2,4 : < 23 (FCC), < 20 (CE/SRRC/MIC) 5,1 : <23 (FCC/CE/SRRC/MIC) Bluetooth Bluetooth 4.2 2,4002,4835

() < 10 Intelligent Flight Battery (: BWX162-2453-7.38) 5 40 C

LiNiMnCoO2 2453

. 37 7,38 DJI USB-C 30

, USB. 14 Compliance Information FCC Compliance Notice Suppliers Declaration of Conformity Product name: DJI Mini 3 Pro Model Number: MT3M3VD; RM330 Responsible Party: DJI Technology, Inc. Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502 Website: www.dji.com We, DJI Technology, Inc., being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information The aircraft complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This remote controller complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body. ISED Compliance Notice This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :(1)Lappareil ne doit pas produire de brouillage; (2)Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with RSS102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites d'exposition aux radiations CNR102 tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. 15 This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. le dispositif utilis dans la bande 5150-

5250 MHz est rserv une utilisation en intrieur afin de rduire le risque de brouillage prjudiciable aux systmes mobiles par satellite dans le mme canal. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body. Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur SAR la plus leve signale en vertu de cette norme lors de la certification de produit utiliser lorsquil est correctement port sur le corps. CMIIT ID CMIIT ID2022AP0287 E

E

. Voir le E-label Balayez de haut en bas depuis lcran d'accueil pour accder aux Paramtres rapides, appuyez sur slectionnez Informations de conformit. Visualizar selo eletrnico Deslize para baixo a partir do topo da tela inicial para abrir as Configuraes rpidas, toque em selecione Informaes de conformidade. et e

(Pb)

(Hg)

(Cd)

(Cr+6)

(PBB)

(PBDE) SJ/T 11364 GB/T 26572 GB/T 26572 (

ROHS ) 5150-5250MHz, /Indoor use Only W52 KCC Compliance Notice

. 16 NCC Compliance Notice EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (DJI Mini 3 Pro) is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/

EU. A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany GB Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (DJI Mini 3 Pro) is in compliance with the essential requirements and other relevant provisions of Radio Equipment Regulations 2017. A copy of the GB Declaration of Conformity is available online at www.dji.com/euro-compliance Declaracin de cumplimiento UE: SZ DJI TECHNOLOGY CO., LTD. por la presente declara que este dispositivo (DJI Mini 3 Pro) cumple los requisitos bsicos y el resto de provisiones relevantes de la Directiva 2014/53/EU. Hay disponible online una copia de la Declaracin de conformidad UE en www.dji.com/euro-compliance Direccin de contacto de la UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany EU-verklaring van overeenstemming: SZ DJI TECHNOLOGY CO., LTD. verklaart hierbij dat dit apparaat

(DJI Mini 3 Pro) voldoet aan de essentile vereisten en andere relevante bepalingen van Richtlijn 2014/53/

EU. De EU-verklaring van overeenstemming is online beschikbaar op www.dji.com/euro-compliance Contactadres EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Declarao de conformidade da UE: A SZ DJI TECHNOLOGY CO., LTD. declara, atravs deste documento, que este dispositivo (DJI Mini 3 Pro) est em conformidade com os requisitos essenciais e outras disposies relevantes da Diretiva 2014/53/EU. Existe uma cpia da Declarao de conformidade da UE disponvel online em www.dji.com/euro-

compliance Endereo de contacto na UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Dichiarazione di conformit UE: SZ DJI TECHNOLOGY CO., LTD. dichiara che il presente dispositivo (DJI Mini 3 Pro) conforme ai requisiti essenziali e alle altre disposizioni rilevanti della direttiva 2014/53/EU. Una copia della dichiarazione di conformit UE disponibile online all'indirizzo Web www.dji.com/euro-

compliance Indirizzo di contatto UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Dclaration de conformit UE: Par la prsente, SZ DJI TECHNOLOGY CO., LTD. dclare que cet appareil (DJI Mini 3 Pro) est conforme aux principales exigences et autres clauses pertinentes de la directive europenne 2014/53/EU. Une copie de la dclaration de conformit UE est disponible sur le site www.dji.com/euro-compliance Adresse de contact pour l'UE : DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany EU-Compliance: Hiermit erklrt SZ DJI TECHNOLOGY CO., LTD., dass dieses Gert (DJI Mini 3 Pro) den wesentlichen Anforderungen und anderen einschlgigen Bestimmungen der EU-Richtlinie 2014/53/EU entspricht. Eine Kopie der EU-Konformittserklrung finden Sie online auf www.dji.com/euro-compliance Kontaktadresse innerhalb der EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

: SZ DJI TECHNOLOGY CO., LTD. ,

(DJI Mini 3 Pro) 2014/53/. www.dji.com/euro-

compliance

: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, 17 Prohlen o shod pro EU: Spolenost SZ DJI TECHNOLOGY CO., LTD. tmto prohlauje, e tohle zazen (DJI Mini 3 Pro) vyhovuje zkladnm poadavkm a dalm pslunm ustanovenm smrnice 2014/53/EU. Kopie prohlen o shod pro EU je k dispozici on-line na webu www.dji.com/euro-compliance Kontaktn adresa v EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nmecko EU-overensstemmelseserklring: SZ DJI TECHNOLOGY CO., LTD. erklrer hermed, at denne enhed

(DJI Mini 3 Pro) er i overensstemmelse med de vsentlige krav og andre relevante bestemmelser i direktiv 2014/53/EU. Der er en kopi af EU-overensstemmelseserklringen tilgngelig online p www.dji.com/euro-compliance EU-kontaktadresse: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland

: SZ DJI TECHNOLOGY CO., LTD.

(DJI Mini 3 Pro) 2014/53/E. www.dji.com/euro-

compliance

: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, ELi vastavuskinnitus Kesolevaga teatab SZ DJI TECHNOLOGY CO., LTD., et see seade (DJI Mini 3 Pro) on koosklas direktiivi 2014/53/EL oluliste nuete ja muude asjakohaste stetega. ELi vastavusdeklaratsiooni koopia on kttesaadav veebis aadressil www.dji.com/euro-compliance Kontaktaadress ELis: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Saksamaa Praneimas dl atitikties ES reikalavimams Bendrov SZ DJI TECHNOLOGY CO., LTD. tvirtina, kad is prietaisas (DJI Mini 3 Pro) atitinka pagrindinius 2014/53/ES direktyvos reikalavimus ir kitas susijusias nuostatas. ES atitikties deklaracijos kopij galite rasti adresu www.dji.com/euro-compliance ES kontaktinis adresas: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany (Vokietija) ES atbilstbas paziojums: SZ DJI TECHNOLOGY CO., LTD. ar o apliecina, ka ierce (DJI Mini 3 Pro) atbilst direktvas 2014/53/ES pamatprasbm un prjiem btiskiem nosacjumiem. ES atbilstbas deklarcijas kopija pieejama tiesaist vietn www.dji.com/euro-compliance ES kontaktadrese: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Vcija EU:n vaatimustenmukaisuusvakuutus: SZ DJI TECHNOLOGY CO., LTD. ilmoittaa tten, ett tm laite

(DJI Mini 3 Pro) on direktiivin 2014/53/EU olennaisten vaatimusten ja sen muiden asiaankuuluvien ehtojen mukainen. Kopio EU:n vaatimustenmukaisuusvakuutuksesta on saatavana verkossa osoitteessa www.dji.com/euro-

compliance Yhteystiedot EU:ssa: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany RITEAS Comhlonta an AE: Dearbhaonn SZ DJI TECHNOLOGY CO., LTD. leis seo go bhfuil an glas seo de (DJI Mini 3 Pro) rir na gceanglas riachtanach agus na bhforlacha bhartha eile sa Treoir 2014/53/AE. T coip de Dhearbh Comhrireachta an AE ar fil ar lne ag www.dji.com/euro-compliance Seoladh teagmhla san AE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Dikjarazzjoni ta Konformit tal-UE: SZ DJI TECHNOLOGY CO., LTD. hawnhekk tiddikjara li dan l-apparat

(DJI Mini 3 Pro) huwa konformi mar-rekwiiti essenzjali u ma dispoizzjonijiet relevanti ora tad-Direttiva 2014/53/UE. Kopja tad-Dikjarazzjoni ta Konformit tal-UE hija disponibbli onlajn fis-sit www.dji.com/euro-compliance Indirizz ta kuntatt tal-UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, il-ermanja Declaraia UE de conformitate: Prin prezenta, SZ DJI TECHNOLOGY CO., LTD. declar faptul c acest dispozitiv (DJI Mini 3 Pro) este conform cu cerinele eseniale i celelalte prevederi relevante ale Directivei 2014/53/UE. Un exemplar al Declaraiei UE de conformitate este disponibil online, la adresa www.dji.com/euro-

compliance Adresa de contact pentru UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germania Izjava EU o skladnosti: Druba SZ DJI TECHNOLOGY CO., LTD. izjavlja, da ta naprava (DJI Mini 3 Pro) ustreza osnovnim zahtevam in drugim ustreznim dolobam Direktive 2014/53/EU. Kopija izjave EU o skladnosti je na voljo na spletu na www.dji.com/euro-compliance Kontaktni naslov EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemija EU Izjava o sukladnosti: SZ DJI TECHNOLOGY CO., LTD. izjavljuje da je ovaj ureaj (DJI Mini 3 Pro) izraen u skladu s osnovnim zahtjevima i ostalim relevantnim odredbama Direktive 2014/53/EU. Kopija EU Izjave o sukladnosti dostupna je na mrenoj stranici www.dji.com/euro-compliance Adresa EU kontakta: DJI GmbH, Industriestrasse 12 97618, Niederlauer, Njemaka 18 Vyhlsenie o zhode E: SZ DJI TECHNOLOGY CO., LTD. tmto vyhlasuje, e toto zariadenie (DJI Mini 3 Pro) je v zhode so zkladnmi poiadavkami a almi relevantnmi ustanoveniami smernice 2014/53/E. Kpia tohto Vyhlsenia o zhode E je k dispozcii online na www.dji.com/euro-compliance Kontaktn adresa v E: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemecko Deklaracja zgodnoci UE: Firma SZ DJI TECHNOLOGY CO., LTD. niniejszym owiadcza, e przedmiotowe urzdzenie (DJI Mini 3 Pro) jest zgodne z zasadniczymi wymogami i innymi stosownymi postanowieniami dyrektywy 2014/53/UE. Kopi deklaracji zgodnoci UE mona znale w Internecie na stronie www.dji.com/euro-compliance Adres do kontaktu w UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Niemcy EU megfelelsgi nyilatkozat: A SZ DJI TECHNOLOGY CO., LTD. ezton megersti, hogy ez az eszkz (DJI Mini 3 Pro) megfelel a 2014/53/EU Irnyelv alapvet kvetelmnyeinek s ms vonatkoz rendelkezseinek. Az EU megfelelsgi nyilatkozat msolata elrhet a www.dji.com/euro-compliance oldalon EU kapcsolati cm: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nmetorszg EU-frskran om efterlevnad: SZ DJI TECHNOLOGY CO., LTD. hrmed frklarar att denna enhet (DJI Mini 3 Pro) uppfyller de vsentliga kraven och andra relevanta bestmmelser i direktivet 2014/53/EU. En kopia av EU-frskran om efterlevnad finns att tillg online p adressen www.dji.com/euro-compliance Kontaktadress EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland Yfirlsing um fylgni vi reglur ESB: SZ DJI TECHNOLOGY CO., LTD. lsir hr me yfir a etta tki (DJI Mini 3 Pro) hlti mikilvgum krfum og rum vieigandi kvum tilskipunar 2014/53/ESB. Nlgast m eintak af ESB-samrmisyfirlsingunni netinu www.dji.com/euro-compliance Heimilisfang ESB-tengiliar: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany AB Uygunluk Beyan: SZ DJI TECHNOLOGY CO., LTD. bu belge ile bu cihazn (DJI Mini 3 Pro) temel gerekliliklere ve 2014/53/EU sayl Direktifin dier ilgili hkmlerine uygun olduunu beyan eder. AB Uygunluk Beyannn bir kopyasna www.dji.com/euro-compliance adresinden evrim ii olarak ulalabilir AB iin iletiim adresi: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Almanya CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Environmentally friendly disposal Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances. Umweltfreundliche Entsorgung Dies ist das Symbol fr die getrennte Sammlung von Elektro- und Elektronikgerten. Elektroaltgerte drfen nicht zusammen mit dem Restmll entsorgt werden (einschlielich Batterien, Akkus und Lampen), sondern mssen separat entsorgt werden. Die Entsorgung an der kommunalen Sammelstelle durch Privatpersonen oder an den von Hndlern oder Herstellern eingerichteten Sammelstellen ist kostenlos. Der Besitzer von Altgerten ist dafr verantwortlich, die persnlichen oder vertraulichen Daten auf den zu entsorgenden Altgerten zu lschen und die Gerte zu diesen oder hnlichen Sammelstellen zu bringen. Die Hndler sind verpflichtet, Elektroaltgerte fr dich kostenlos zurckzunehmen. Durch diesen geringen Aufwand kannst du zur Wiederverwertung von wertvollen Rohmaterialien beitragen und dafr sorgen, dass umweltschdliche und giftige Substanzen ordnungsgem unschdlich gemacht werden. Tratamiento de residuos responsable con el medio ambiente Los aparatos elctricos viejos no pueden desecharse junto con los residuos orgnicos, sino que deben ser desechados por separado. Existen puntos limpios donde los ciudadanos pueden dejar estos aparatos gratis. El propietario de los aparatos viejos es responsable de llevarlos a estos puntos limpios o similares puntos de recogida. Con este pequeo esfuerzo ests contribuyendo a reciclar valiosas materias primas y al tratamiento de residuos txicos. Mise au rebut cologique Les appareils lectriques usags ne doivent pas tre limins avec les dchets rsiduels. Ils doivent tre limins sparment. La mise au rebut au point de collecte municipal par l'intermdiaire de particuliers est gratuite. Il incombe au propritaire des appareils usags de les apporter ces points de collecte ou des points de collecte similaires. Avec ce petit effort personnel, vous contribuez au recyclage de matires premires prcieuses et au traitement des substances toxiques. 19 Smaltimento ecologico I vecchi dispositivi elettrici non devono essere smaltiti insieme ai rifiuti residui, ma devono essere smaltiti separatamente. Lo smaltimento da parte di soggetti privati presso i punti di raccolta pubblici gratis. responsabilit del proprietario dei vecchi dispositivi portarli presso tali punti di raccolta o punti di raccolta analoghi. Grazie a questo piccolo impegno personale contribuirete al riciclo di materie prime preziose e al corretto trattamento di sostanze tossiche. Milieuvriendelijk afvoeren Oude elektrische apparaten mogen niet worden weggegooid samen met het restafval, maar moeten afzonderlijk worden afgevoerd. Afvoeren via het gemeentelijke inzamelpunt is gratis voor particulieren. De eigenaar van oude toestellen is verantwoordelijk voor het inleveren van de apparaten op deze of vergelijkbare inzamelpunten. Met deze kleine persoonlijke inspanning lever je een bijdrage aan de recycling van waardevolle grondstoffen en de verwerking van giftige stoffen. Eliminao ecolgica Os aparelhos eltricos antigos no podem ser eliminados juntamente com os materiais residuais. Tm de ser eliminados separadamente. A eliminao no ponto de recolha pblico atravs de entidades particulares gratuita. da responsabilidade do proprietrio de aparelhos antigos lev-los a estes pontos de recolha ou a pontos de recolha semelhantes. Com este pequeno esforo pessoal, contribui para a reciclagem de matrias-primas teis e para o tratamento de substncias txicas.

, . Ekologicky etrn likvidace Star elektrick zazen nesmj bt likvidovna spolu se zbytkovm odpadem, ale mus bt likvidovna samostatn. Likvidace na komunlnch sbrnch mstech prostednictvm soukromch osob je bezplatn. Vlastnk starch zazen odpovd za to, e je donese do tchto sbrnch mst nebo na obdobn sbrn msta. Tmto mete pispt k recyklaci hodnotnch surovin a zpracovn toxickch ltek. Miljvenlig bortskaffelse Gamle elektriske apparater m ikke bortskaffes sammen med restaffald, men skal bortskaffes separat. Bortskaffelse p et flles indsamlingssted er gratis for privatpersoner. Ejere af gamle apparater er ansvarlige for at bringe apparater hen til disse indsamlingssteder eller til lignende indsamlingssteder. Med denne lille personlige indsats bidrager du til genanvendelse af vrdifulde rvarer og behandlingen af giftige stoffer.

. Keskkonnasstlik kasutuselt krvaldamine Vanu elektriseadmeid ei tohi ra visata koos olmejtmetega, vaid tuleb koguda ja kasutuselt krvaldada eraldi. Kohaliku omavalitsuse elektroonikaromude kogumispunktis on raandmine eraisikutele tasuta. Vanade seadmete sellistesse vi sarnastesse kogumispunktidesse toimetamise eest vastutavad seadmete omanikud. Selle vikese isikliku panusega aitate kaasa vrtusliku toorme ringlussevtule ja mrgiste ainete ttlemisele. Utilizavimas nekenkiant aplinkai Sen elektrini prietais negalima imesti kartu su buitinmis atliekomis; juos btina utilizuoti atskirai. Toki prietais utilizavimas per komunalinius atliek surinkimo punktus yra nemokamas. Elektrini prietais savininkai utilizuojamus prietaisus privalo priduoti atitinkamus arba analogikus atliek surinkimo punktus. Tokiu bdu, ddami nedaug pastang, prisidsite prie verting mediag perdirbimo ir aplinkos apsaugojimo nuo toksini mediag. Videi draudzga atkritumu likvidana Vecas elektrisks ierces nedrkst likvidt kop ar prjiem atkritumiem, bet ts jlikvid atsevii. Privtpersonm atkritumu likvidana komunlaj savkanas punkt ir bez maksas. Veco ieru panieks ir atbildgs par ieru nogdanu ajos savkanas punktos vai ldzgos savkanas punktos. Ar m nelielm personiskajm plm js veicint vrtgu izejmaterilu prstrdi un toksisko vielu apstrdi. 20 Hvittminen ympristystvllisesti Vanhoja shklaitteita ei saa hvitt kaatopaikkajtteen mukana, vaan ne on hvitettv erikseen. Kunnalliseen keryspisteeseen vieminen on yksityishenkillle ilmaista. Vanhojen laitteiden omistaja vastaa laitteiden toimittamisesta kyseisiin keryspisteisiin tai vastaaviin. Tll vhisell henkilkohtaisella vaivalla edistt omalta osaltasi arvokkaiden raaka-aineiden kierrtyst ja myrkyllisten aineiden ksittely. Discairt neamhdhobhlach don chomhshaol Nor cheart seanghlasanna leictreacha a dhiscairt leis an dramhal iarmharach, ach caithfear iad a chur de limh astu fin. T an discairt ag an ionad bailichin pobail ag daoine probhideacha saor in aisce. T freagracht ar inir seanghlasanna na glasanna a thabhairt chuig na hionaid bhailichin sin n chuig ionaid bhailichin den chinel canna. Le hiarracht bheag phearsanta mar sin, cuidonn t le hamhbhair luachmhara a athchrsil agus le substaint tocsaineacha a chireil Rimi li jirrispetta l-ambjent L-apparat elettriku qadim ma gandux jintrema flimkien ma skart residwu, ida gandu jintrema bmod separat. Ir-rimi fil-post tal-bir komunali minn persuni privati huwa bxejn. Is-sit ta apparat qadim huwa responsabbli biex iib l-apparat fdawn il-postijiet tal-bir jew fpostijiet tal-bir simili. Bdan l-isforz personali gir, inti tikkontribwixxi gar-riikla ta materja prima prezzjua u gat-trattament ta sustanzi tossii. Eliminarea ecologic Aparatele electrice vechi nu trebuie aruncate odat cu deeurile reziduale, ci trebuie eliminate separat. Eliminarea n cadrul punctului de colectare local de ctre persoane fizice este gratuit. Proprietarii de aparate vechi sunt responsabili pentru transportul acestora la respectivele puncte de colectare sau la alte puncte de colectare similare. Prin acest efort personal nesemnificativ, putei contribui la reciclarea materiilor prime valoroase i la tratarea substanelor toxice. Okolju prijazno odlaganje Starih elektrinih aparatov ne smete odvrei skupaj z ostanki odpadkov, temve loeno. Odlaganje na komunalnem zbirnem mestu je za fizine osebe brezplano. Lastnik starih naprav je odgovoren, da jih pripelje do teh ali podobnih zbirnih mest. S tako malo osebnega truda prispevate k recikliranju dragocenih surovin in obdelavi strupenih snovi. Ekoloko odlaganje Stari elektrini ureaji ne smiju se odlagati zajedno s kunim otpadom, ve ih treba odlagati odvojeno. Odlaganje na komunalnom sabirnom mjestu od strane privatnih osoba je besplatno. Vlasnik starih ureaja duan je donijeti ureaje do tih sabirnih mjesta ili slinih sabirnih mjesta. Ovim malim osobnim naporom doprinosite recikliranju vrijednih sirovina i pravilnoj obradi otrovnih tvari. Ekologick likvidcia Star elektrospotrebie sa nesm likvidova spolu so zvykovm odpadom, ale musia sa zlikvidova samostatne. Likvidcia v komunlnom zbernom mieste prostrednctvom skromnch osb je bezplatn. Majite starch spotrebiov je zodpovedn za prinesenie spotrebiov na tieto zbern miesta alebo na podobn zbern miesta. Tmto malm osobnm silm prispievate k recyklovaniu cennch surovn a spracovaniu toxickch ltok. Utylizacja przyjazna dla rodowiska Nie mona usuwa starych urzdze elektrycznych wraz z pozostaymi odpadami. Wymagaj one oddzielnej utylizacji. Utylizacja przez osoby prywatne w punkcie zbirki odpadw komunalnych jest darmowa. Waciciel starych urzdze jest odpowiedzialny za dostarczenie ich do takich lub podobnych punktw zbirki. Zadajc sobie tak niewielki trud, przyczyniasz si do recyklingu cennych surowcw i odpowiedniego postpowania z substancjami toksycznymi. Krnyezetbart hulladkkezels A rgi elektromos kszlkeket nem szabad a nem szelektven gyjttt hulladkkal egytt kidobni, hanem a hulladkkezelsket elklntve kell vgezni A kzssgi gyjtpontokon a magnszemlyek ingyenesen leadhatjk ezeket. A rgi kszlkek tulajdonosai felelnek azrt, hogy e kszlkeket ezekre a gyjtpontokra, vagy ms gyjtpontokra elhozzk. Ezzel a kis szemlyes erfesztssel n is hozzjrul az rtkes nyersanyagok jrahasznostshoz s a mrgez anyagok kezelshez. Miljvnlig hantering av avfall Gamla elektriska apparater fr inte kasseras tillsammans med restavfallet utan mste kasseras separat. Kassering p den lokala insamlingsplatsen fr privatpersoner r gratis. garen av gamla apparater ansvarar fr att ta apparaterna till dessa insamlingsplatser eller till liknande insamlingsplatser. Med denna lilla personliga insats bidrar du till tervinning av vrdefulla rvaror och hantering av giftiga mnen. Umhverfisvn frgun Ekki m farga gmlum raftkjum me rgangsleifum, heldur arf a farga eim srstaklega. Frgun almennum sfnunarstum er keypis fyrir einstaklinga. Eigandi gamalla tkja ber byrg a koma me tkin essa sfnunarstai ea svipaa sfnunarstai. Me essu litla persnulega taki stular a endurvinnslu vermtra hrefna og mefer eitrurefna. 21 evre dostu bertaraf Eski elektrikli cihazlar, dier atklarla birlikte bertaraf edilmemeli, ayrca atlmaldr. zel kiiler araclyla genel toplama noktasna bertaraf ilemi cretsiz olarak yaplmaktadr. Eski cihazlarn sahibi, cihazlar bu toplama noktalarna veya benzer toplama noktalarna getirmekten sorumludur. Bu az miktardaki kiisel abayla, deerli ham maddelerin geri dntrlmesine ve toksik maddelerin ileme alnmasna katkda bulunmu olursunuz. This device is restricted to indoor use when operating in the 5150-5250MHz frequency range in all EU/

EFTA member states and Turkey. Im Frequenzbereich 5150 5250 MHz darf dieses Gert in allen EU/EFTA-Mitgliedsstaaten und der Trkei nur innerhalb von Gebuden verwendet werden. Este dispositivo est limitado a su uso en interiores cuando est funcionando en el rango de frecuenciade 5150-5250 MHz en todos los estados miembros de la UE/AELC y Turqua. Cet appareil est rserv un usage en intrieur dans une plage de frquence de 5 150 5 250 MHz dans tous les pays membres de l'Union Europenne et de l'Association europenne de libre-change,ainsi qu'en Turquie. Il presente dispositivo limitato all'uso in ambienti interni se utilizzato nell'intervallo di frequenze difunzionamento 5150-5250 MHz in tutti gli stati dell'UE/AELS e in Turchia. Dit apparaat mag in landen van de EU/EFTA en Turkije alleen in binnenruimtes worden gebruikt wanneer het frequentiebereik 5150-5250 MHz is ingesteld. Este dispositivo est restrito para uso em reas internas ao operar na faixa de frequncia de 5150-

5250MHz em todos os estados-membros da UE/EFTA e Turquia. This device is restricted to indoor use when operating in the 5150-5250MHz frequency range in UK. 5150-5250

, /, . BE IE CY NL SK CH BG EL LV AT FI IS CZ ES LT PL SE LI DK FR LU PT UK (NI) DE HR HU RO TR EE IT MT SI NO UK Thailand Warning message

. Mexico Warning message La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Brazil Warning message Informaes sobre Regulamentao Estes equipamentos esto certificados e homologados pela ANATEL. Para maiores informaes, consulte o site da ANATEL: www.anatel.gov.br. Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados. Este produto est homologado pela Anatel de acordo com os procedimentos regulamentados para avaliao da conformidade de produtos para telecomunicaes e atende aos requisitos tcnicos aplicados, incluindo os limites de exposio da Taxa de Absoro Especfica referente a campos eltricos, magnticos e eletromagnticos de radiofrequncia. 22 WE ARE HERE FOR YOU Contact DJI SUPPORT https://www.dji.com/mini-3-pro/downloads is a trademark of DJI. USB-C is a registered trademark of USB Implementers Forum. Copyright 2022 DJI All Rights Reserved. YCBZSS00189904

DJI MINI 3 PRO

#15 /Model:MT3M3VZ CAN ICES-003(B)/NMB-003(B) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation. SZ DJ| TECHNOLOGY CO., LTD. Address: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, China WARNING HAZARDOUS MOVING PARTS KEEP FINGERS AND OTHER BODY PARTS AWAY Powered by battery:

7.38 CMIIT ID: XXXXXX FCC ID: SS3-MT3M3VZ IC: 18OSA-MT3M3VZ oO XXXXXXXXXXAXXX FRUIPAR CUE APRA) R-R-dji-MT3M3VD_ Made in China [0]

Gem 78203

DJI Antenna Datasheet ___WM162 UAV antenna____ __ 2022-01-07 1 Revision history Version Change notes Modificator Date V1.0 First draft. Hunter.yin 2022.01.07 DJI Antenna Datasheet 1 Basic Specifications No. Specification Descriptions Note 1 2 3 4 5 6 7 8 9 Antenna Name WM162 UAV Ant Brand Operation Frequency DJI 2.4~2.483GHz;

5.725~5.875GHz Connector Type Ipex-4 Impedance 50ohm Gain 1.5dBi@2.4~2.483GHz ANT 0 3.5dBi@5.725~5.875GHz ANT 0 1.5dBi@2.4~2.483GHz ANT 1 2.5dBi@5.725~5.875GHz ANT 1 2.5dBi@2.4~2.483GHz ANT 2 3.5dBi@5.725~5.875GHz ANT 2 2.0dBi@2.4~2.483GHz ANT 3 3.5dBi@5.725~5.875GHz ANT 3 Efficiency 40%

VSWR 2.5 Polarization type Linear 10 3dB Beamwidth

11 Weight About 1g 12 Antenna type Dipole 1 2 Antenna Return Loss/VSWR 2.1 ANT 0-antenna VSWR 2.2 ANT 2-antenna VSWR 2.3 ANT 1-antenna VSWR 2.4 ANT 3-antenna VSWR 3 Antenna Gain 3.1 ANT 2 antenna Frequency E Total. dB (dB) 2.4GHz ANTENNA GAIN 2400 2420 2440 2.26 2.31 2.42 2450 2460 2480 5700 5750 5850 5.8GHz ANTENNA GAIN 2.50 2.43 2.42 3.40 3.50 3.37 3.2 ANT 0 antenna Frequency E Total. dB (dB) 2.4GHz ANTENNA GAIN 2400 2420 2440 2450 2460 2480 5700 5750 5850 5.8GHz ANTENNA GAIN 1.21 1.35 1.39 1.50 1.41 1.24 3.45 3.50 3.40 3.3 ANT 3 antenna Frequency E Total. dB (dB) 2.4GHz ANTENNA GAIN 2400 2420 2440 2450 2460 2480 5700 5750 5850 5.8GHz ANTENNA GAIN 1.83 1.84 2.00 2.00 1.89 1.82 3.18 3.50 3.01 3.4 ANT 1 antenna Frequency E Total. dB (dB) 2.4GHz ANTENNA GAIN 2400 2420 2440 2450 2460 2480 5700 5750 5850 5.8GHz ANTENNA GAIN 1.32 1.33 1.19 1.46 1.50 1.46 2.42 2.47 2.50 4 Radiation Pattern Test labSatimo SG24 Test date2020/10/15 4.1 ANT 2 antenna 2.4G radiation pattern Phi=0 Phi=90 Theta=90 4.2 ANT 2 antenna 5.8G radiation pattern Phi=0 Phi=90 Theta=90 4.3 ANT 0 antenna 2.4G radiation pattern Phi=0 Phi=90 Theta=90 4.4 ANT 0 antenna 5.8G radiation pattern Phi=0 Phi=90 Theta=90 4.5 ANT 3 antenna 2.4G radiation pattern Phi=0 Phi=90 Theta=90 4.6 ANT 3 antenna 5.8G radiation pattern Phi=0 Phi=90 Theta=90 4.7 ANT 1 antenna 2.4G radiation pattern Phi=0 Phi=90 Theta=90 4.8 ANT 1 antenna 5.8G radiation pattern Phi=0 Phi=90 Theta=90 5 Structure drawing 5.1 ANT 0 antenna 2D 5.2 ANT 2 antenna 2D 5.3 ANT 3 antenna 2D 5.4 ANT 1 antenna 2D

SZ DJI TECHNOLOGY CO., LTD. Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 05-08-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: SS3-MT3M3VZ

[SZ DJI TECHNOLOGY CO.,LTD.] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely yours, Applicant Signature Printed Name: Gary Zeng Title: Certification Manager Address:

Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China. Tel.: +86 755 26656677 Email: gary.zeng@dji.com

SZ DJI TECHNOLOGY CO., LTD. Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 05-08-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: SS3-MT3M3VZ

[SZ DJI TECHNOLOGY CO.,LTD.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Gary Zeng Title: Certification Manager Address: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China. Tel.: +86 755 26656677 Email: gary.zeng@dji.com

SZ DJI TECHNOLOGY CO., LTD. U.S. Agent Letter of Attestation To:

Federal Communications Commission Date: 05-06-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement Part 2.911(d)(7) filing FCC ID: SS3-MT3M3VZ SZ DJI TECHNOLOGY CO.,LTD. (the applicant) certifies that, as of the date of the filing of the application, DJI Research LLC (the agent) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. DJI Research LLC (the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. APPLICANT Company Name: SZ DJI TECHNOLOGY CO.,LTD. Contact Person: Gary Zeng Address: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China. Tel.: +86 755 26656677 Email: gary.zeng@dji.com U.S. Agent Company Name: DJI Research LLC Contact Person: Jinyu Guo Address: 435 Portage Ave, Palo Alto, CA 94306 Tel.: 530-574-9905 FCC FRN: 0033569757 Sincerely yours, Email: jinyu.guo@dji.com The Applicant SZ DJI TECHNOLOGY CO.,LTD. Gary Zeng The Agent DJI Research LLC Jinyu Guo Company Name Contact Person Signature

Standard Form Request for Confidentiality Letter SZ DJI TECHNOLOGY CO., LTD. Confidentiality Letter Date: 8 May 2023 Subject: Confidentiality Request for FCC ID: SS3-MT3M3VZ and IC: 11805A-MT3M3VZ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent n/a n/a Exhibit Block Diagrams Internal Photos Operation Description/Theory of Operation Antenna datasheet Schematics Users Manual Test Setup External Photos SZ DJI TECHNOLOGY CO., LTD. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:

_________________________________ _______ Gary Zeng (Certification Manager)_________

(Signature/Title)

(Print name) MS-0044715 Page 1 of 1 Revision 0