FCC ID: SS3-WM3211503 DJI Phantom 3 Standard

Camera and Gimbal This section provides the technical s p e c i f i c a t i o n s o f t h e c a m e r a a n d explains the gimbals operation modes. 30 2015 DJI. All Rights Reserved. Camera and Gimbal Camera Profile The on-board camera uses the 1/2.3 inch CMOS sensor to capture video (up to 30fps with the Phantom 3 Standard) and 12 megapixel stills. You may choose to record the video in either MOV or MP4 format. Available picture shooting modes include burst, continuous, and time-lapse mode. A live preview of what the camera sees can be monitored on the WiFi connected mobile device via the DJI Pilot app. Camera Micro-SD Card Slot To store your photos and videos, insert the Micro-SD card into the slot, as shown below, before turning on the Phantom 3 Standard. The Phantom 3 Standard comes with a 16 GB Micro-SD card and supports Micro-

SD cards up to 64 GB. A UHS-1 Micro-SD card is recommended due to their fast read and write speeds allowing you to save high-resolution video data. Do not remove the Micro-SD card from the Phantom 3 Standard when it is turned on. Camera Data Port Turn on the Phantom 3 Standard and connect a USB cable to the Camera Data Port to download photos and videos to your computer. The aircraft must be turned on before attempting to access the files on the Micro-SD card. 2015 DJI. All Rights Reserved. 31 Gimbal Camera Camera Operation Use the Shutter and Video Recording buttons on the remote controller to shoot the images or videos through the DJI Pilot app. For more information about how to use these buttons, refer to Controlling the Camera Page 24. Gimbal Gimbal Profile The 3-axis gimbal provides a steady platform for the attached camera, allowing you to capture clear, stable images and video. The gimbal can tilt the camera within a 120 range. 30 0

-90 Use the gimbal dial on the remote controller to control the tilt movement of the camera. Gimbal Operation Modes Two gimbal operation modes are available. Switch between the different operation modes on the camera settings page of the DJI Pilot app. Note that your mobile device must be connected to the remote controller for changes to take effect. Refer to the table below for details:

Follow Mode The angle between gimbals orientation and aircrafts nose remains constant at all times. FPV Mode The gimbal will synchronize with the movement of the aircraft to provide a first-person perspective flying experience. A gimbal motor error may occur in these situations: (1) the aircraft is placed on uneven ground or the gimbals motion is obstructed (2) the gimbal has been subjected to an excessive external force, such as a collision. Please take off from flat, open ground and protect the gimbal at all times. Flying in heavy fog or clouds may make the gimbal wet, leading to temporary failure. The gimbal will recover full functionality after it dries. 32 2015 DJI. All Rights Reserved. Gimbal CameraPhantom 3 Standard User Manual Anti-Drop Kit The anti-drop kit helps keep the gimbal and camera connected to the aircraft. Two pins have been mounted prior to shipping. If new or additional pins are required, see the diagram below. Press Part through the hole of the vibration absorber and into the center hole of Part , then lock them together as shown . Mounting the anti-drop kit pins diagonally from each other is recommended. 2015 DJI. All Rights Reserved. 33 Gimbal CameraPhantom 3 Standard User Manual DJI Pilot App This section introduces the four main functions of the DJI Pilot app. 34 2015 DJI. All Rights Reserved. DJI Pilot App The DJI Pilot app is a mobile application designed specifically for the Phantom 3 series. Use this app to control the gimbal, camera, and other aircraft functions. The app also features Map, Academy, and User Center, which are used for configuring your aircraft and sharing your photos and videos with others. It is recommended that you use a tablet for the best experience. United States Mountain View CAMERA DIRECTOR STORE DISCOVERY Camera The Camera page contains a live HD video feed from the Phantom 3 Standards camera. You can also configure various camera parameters from the Camera page.

[17]

[16]

[15]

[14]

[13]

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

MODE P-GPS CL Safe to Fly (GPS) ISO 100 1/320 EV 0 4821 JPEG

[9]

[10]

H: 39M D: 1039M V.S: 8.3M/S H.S:24.2M/S 1.2M

[12]

[11]

2015 DJI. All Rights Reserved. 35 DJI Pilot App [1] Flight Mode

: The text next to this icon indicates the current flight mode. Tap to configure the MC (Main Controller) Settings. These settings allow you to modify flight limits and set the gain values.

[2] GPS Signal Strength

: This icon shows the current strength of GPS signals. Green bars indicate adequate GPS strength.

[3] IOC Settings CL : This icon displays the IOC setting when the aircraft has entered F-mode. Tap to view the IOC settings menu and select the desired IOC setting.

[4] System Status

: This icon indicates the current aircraft system status and GPS signal strength.

[5] Battery Level Indicator

: The battery level indicator provides a dynamic display of the battery level. The colored zones on the battery level indicator represent the power levels needed to carry out different functions.

[6] Remote Controller Signal

: This icon shows the strength of remote controllers signal.

[7] HD Video Link Signal Strength

: This icon shows the strength of the HD video downlink connection between the aircraft and the remote controller.

[8] Battery Level

: This icon shows the current battery level. Tap to view the battery information menu, set the various battery warning thresholds, and view the battery warning history.

[9] General Settings

: Tap this icon to view the General Settings page. From this page, you can set flight parameters, reset the camera, enable the quick view feature, adjust the gimbal roll value, and toggle the flight route display.

[10] Camera Operation Bar Shutter and Recording Settings

: Tap to enter various camera value settings, including color space for the recording, resolution of the videos, image size and so on. Shutter

: Tap this button to take a single photo. Press and hold this button to select single shot, triple shot or time-lapsed shooting modes. 36 2015 DJI. All Rights Reserved. DJI Pilot App Phantom 3 Standard User Manual Record

: Tap once to start recording video, then tap again to stop recording. You can also press the Video Recording Button on the remote controller, which has the same functionality. Playback

: Tap to enter the playback page. You can preview photos and videos as soon as they are captured. Camera Settings

: Tap to set ISO, shutter and auto exposure values of the camera.

[11] Vision Positioning (only available on Phantom 3 Advaned and Professional)

: This icon shows the distance between the surface and the Vision Positioning Systems sensors.

[12] Flight Telemetry H: 39M D: 1039M V.S: 8.3M/S H.S:24.2M/S 1.2M The Vision Positioning Status icon is highlighted when the Vision Positioning is in operation. Flight attitude is indicated by the flight attitude icon.

(1) The red arrow shows which direction the aircraft is facing.

(2) Light blue and dark blue areas indicate pitch.

(3) The angle of the boundary between the light blue and dark blue areas indicates the roll angle.

[13] Map Display the flight path of the current flight. Tap to switch from the Camera GUI to the Map GUI.

[14] Return to Home (RTH)

: Initiate RTH home procedure. Tap to have the aircraft return to the last recorded home point.

[15] Auto Takeoff/Landing

/

: Tap to initiate auto takeoff or landing. 2015 DJI. All Rights Reserved. 37 DJI Pilot App Phantom 3 Standard User Manual [16] Livestream

: Livestream icon indicates the current video feed is broadcasting live on YouTube. Be sure the mobile data service is available on the mobile device.

[17] Back

: Tap to return to the main GUI. Director Director is an automatic video editor built into the DJI Pilot app. After recording several video clips, simply tap Director from the apps home screen. You can then select a template and a specified number of clips, which are automatically combined to create a short film that can be shared immediately. Store Tap Store to visit the official DJI Online Store to see the latest information about DJI products and easily buy new products. Discovery Sync pictures and videos to your mobile device, view flight logs, and check your DJI account status in

"Discovery". Use your registered DJI account to login to "Discovery". 38 2015 DJI. All Rights Reserved. DJI Pilot App Phantom 3 Standard User Manual Flight T h i s s e c t i o n d e s c r i b e s s a f e f l i g h t practices and flight restrictions. 2015 DJI. All Rights Reserved. 39 Flight Once pre-flight preparation is complete, it is recommended that you use the flight simulator in the DJI Pilot app to hone your flight skills and practice flying safely. Ensure that all flights are carried out in an open area. Flight Environment Requirements 1. Do not use the aircraft in severe weather conditions. These include wind speeds exceeding 10 m/s , snow, rain and fog. 2. Only fly in open areas. Tall structures and large metal structures may affect the accuracy of the on-

board compass and GPS system. 3. Avoid obstacles, crowds, high voltage power lines, trees, and bodies of water. 4. Minimize interference by avoiding areas with high levels of electromagnetism, including base stations and radio transmission towers. 5. Aircraft and battery performance is subject to environmental factors such as air density and temperature.Be very careful when flying at altitudes greater than 19, 685 feet (6000 meters) above sea level, as the performance of the battery and aircraft may be affected. 6. The Phantom 3 Standard cannot operate within the polar areas. Flight Limits and No-Fly Zones All unmanned aerial vehicle (UAV) operators should abide by all regulations set forth by government and regulatory agencies including the ICAO and the FAA. For safety reasons, flights are limited by default, which helps users operate this product safely and legally. Flight limitations include height limits, distance limits, and No-Fly Zones. When operating in P-mode, height limits, distance limits, and No-Fly Zones function concurrently to manage flight safety. In A-mode, only height limits are in effect, which by default prevent the aircraft altitude from exceeding 1640 feet (500 m) . Maximum flight altitude & Radius Limits Maximum flight altitude and radius limits may be changed in the DJI Pilot app. Be aware that the maximum flight altitude cannot exceed 1640 feet (500 meters). In accordance with these settings, your Phantom 3 Standard will fly in a restricted cylinder, as shown below:

Maximum Flight Altitude Max Radius Home Point Height of aircraft when turned on 40 2015 DJI. All Rights Reserved. Flight GPS Signal Strong Blinking Green Flight Limits DJI Pilot app Aircraft Status Indicator Maximum Flight Altitude Aircraft's altitude cannot exceed the specified value. Warning: Height limit reached. None. Max Radius Flight distance must be within the max radius. Warning: Distance limit reached. Rapid red flashing when close to the max radius limit. GPS Signal Weak Blinking Yellow Flight Limits DJI Pilot app Aircraft Status Indicator Maximum Flight Altitude Height is restricted to 400 feet. (120m) and under. Warning: Height limit reached. None. Max Radius No limits If you fly out of the limit, you can still control the Phantom 3, but cannot fly it any father. If the Phantom 3 flies out of the max radius in Ready to Fly (non-GPS) mode, it will fly back within range automatically. If the Phantom 3 flies out of the max radius in Ready to Fly (non-GPS) mode, it will fly back within range automatically. No-Fly Zones All No-Fly Zones are listed on the DJI official website at http://flysafe.dji.com/no-fly. No-Fly Zones are divided into Airports and Restricted Areas. Airports include major airports and flying fields where manned aircraft operate at low altitudes. Restricted Areas include border lines between countries or sensitive institute. The details of the No-Fly Zones are explained as follow:

Airport

(1) Airport No-Fly Zone are comprised of Take-off Restricted zones and Restricted Altitude Zones. Each zone features circles of various sizes.

(2) R1 miles (value of the R1 depends on the size and shape of the airport) around the airport is a Take-

off restricted zone, inside of which take off is prevented.

(3) From R1 mile to R1 + 1 mile around the airport the flight altitude is limited to a 15 degree inclination. Starting at 65 feet (20 meters) from the edge of airport and radiating outward. The flight altitude is limited to 1640 feet (500 meters) at R1+1 mile

(4) When the aircraft enters within 320 feet (100 meters) of No-Fly Zones, a warning message will appear on the DJI Pilot app. 2015 DJI. All Rights Reserved. 41 FlightPhantom 3 Standard User Manual 1640 feet 1640 feet 66 feet 1 mile R1 320 feet R2 66 feet 1 mile R1 320 feet R2 Restricted Area

(1) Restricted Areas does not have flight altitude restrictions.

(2) R miles around the designated restriction area is a Take-off Restricted area. Aircraft cannot take off within this zone. The value of R varies based on the definition of the restricted areas.

(3) A warning zone has been set around the Restricted Area. When the aircraft approaches within 0.6 miles (1 km) of this zone, a warning message will appear on the DJI Pilot app. 100m R 100m R 42 2015 DJI. All Rights Reserved. FlightPhantom 3 Standard User Manual GPS Signal Strong Blinking Green Zone Restriction DJI Pilot App Prompt No-fly Zone Motors will not start. If the aircraft enters the restricted area in A-mode, but is switched to P-mode, the aircraft will automatically descend, land, and stop its motors. Restricted-

altitude flight zone If the aircraft enters the restricted area in A-mode, but is switched to P-mode, it will descend to an appropriate altitude and hover 15 feet below the altitude limit. Warning: You are in a No-fly zone. Take off prohibited. Warning: You are in a no-fly zone. Automatic landing has begun. R1: Warning: You are in a restricted zone. Descending to safe altitude. R2: Warning: You are in a restricted zone. Maximum flight altitude is restricted to between 20m and 500m. Fly cautiously. Aircraft Status Indicator Red flashing Warning zone No flight restriction applies, but there will be a warning . Warning: You are approaching a restricted zone, Fly cautiously. Free zone No restrictions. None. None. Semi-automatic descent: All stick commands are available except the throttle stick command during the descent and landing process. Motors will stop automatically after landing. When flying in a safety zone, the aircraft's status indicator will blink red rapidly and continue for 3 seconds, then switch to indicate current flying status and continue for 5 seconds at which point it will switch back to blinking red. For safety reasons, please do not fly close to airports, highways, railway stations, railway lines, city centers, or other sensitive areas. Fly the aircraft only within your line of sight. 2015 DJI. All Rights Reserved. 43 FlightPhantom 3 Standard User Manual Preflight Checklist 1. Remote controller, Intelligent Flight Battery, and mobile device are fully charged. 2. Propellers are mounted correctly and firmly. 3. Micro-SD card has been inserted, if necessary. 4. Gimbal is functioning normally. 5. Motors can start and are functioning normally. 6. The DJI Pilot app is successfully connected to the aircraft. Calibrating the Compass IMPORTANT: Always calibrate the compass in every new flight location. The compass is very sensitive to electromagnetic interference, which can produce abnormal compass data and lead to poor flight performance or flight failure. Regular calibration is required for optimal performance. Do not calibrate your compass where there is any possibility of strong magnetic interference. Sources of potential interference include magnetite, parking structures, and subterranean metal structures Do not carry ferromagnetic materials with you during calibration such as keys or cellular phones. Do not calibrate in direct proximity to large metal objects. DO NOT calibrate indoors. Calibration Procedures Choose an open area to carry out the following procedures. 1. Ensure that the compass is calibrated. If you did not calibrate the compass as part of your pre-flight preparations, or if you have moved to a new location since the last calibration, tap the Aircraft Status Bar in the app and select Calibrate, then follow the on-screen instructions. 2. Hold the aircraft horizontally and rotate 360 degrees. The Aircraft Status Indicators will display a solid green light. 44 2015 DJI. All Rights Reserved. FlightPhantom 3 Standard User Manual 3. Hold the aircraft vertically, with nose pointing downward, and rotate it 360 degrees around the center axis. Recalibrate the compass if the Aircraft Status Indicator glows solid red. If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move your aircraft to a different location and try again. Calibrate the compass before each flight. Launch the DJI Pilot app and follow the on-screen instructions to calibrate the compass. DO NOT calibrate the compass near metal objects such as a metal bridge, cars, scaffolding. When to Recalibrate 1.When compass data is abnormal and the Aircraft Status Indicator is blinking green and yellow. 2.When flying in a new location or in a location that is different from the most recent flight. 3.When the mechanical or physical structure of the Phantom 3 Standard has been changed. 4.When severe drifting occurs in flight, i.e. Phantom 3 Standard does not fly in straight line. Auto Takeoff and Auto Landing Auto Takeoff Use auto takeoff only if the Aircraft Status Indicators are blinking green. Follow the steps below to use the auto takeoff feature:

1. Launch the DJI Pilot app, and enter Camera page. 2. Ensure the S1 switch on the remote controller is at the upper position. 3. Complete all steps on the pre-flight checklist. 4. Tap 5. Aircraft takes off and hovers at (1.5 meters) above ground.

, and confirm that conditions are safe for flight. Slide the icon to confirm and takeoff. Aircraft Status Indicator blinks rapidly when it is using the Vision Position System for stabilization. The aircraft will automatically hover below 3 meters. It is recommended to wait until there is sufficient GPS lock before using the Auto Take-off feature. 2015 DJI. All Rights Reserved. 45 FlightPhantom 3 Standard User Manual Auto-Landing Use auto-landing only if the Aircraft Status Indicators are blinking green. Follow the steps below to use the auto-landing feature:

1. Ensure the aircraft is in P- mode. 2. Check the landing area condition before tapping

, to begin landing. Then follow the on-screen instructions. Starting/Stopping the Motors Starting the Motors A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the bottom inner or outer corners to start the motors. Once the motors have started spinning, release both sticks simultaneously. OR Stopping the Motors There are two methods to stop the motors. Method 1: When Phantom 3 Standard has landed, push the throttle down , then conduct the same CSC that was used to start the motors, as described above . Motors will stop immediately. Release both sticks once motors stop. Method 2: When the aircraft has landed, push and hold the throttle down. The motors will stop after three seconds. OR Method 1 Method 2 Do not perform a CSC when the aircraft is in midair, otherwise the motors will suddently stop. Flight Test Takeoff/Landing Procedures 1. Place the aircraft in an open, flat area with the battery level indicators facing towards you. 2. Turn on the remote controller and your mobile device, then turn on the Intelligent Flight Battery. 3. Launch the DJI Pilot app and enter the Camera page. 4. Wait until the Aircraft Indicators blink green. This means the Home Point is recorded and it is now safe to fly. If they flash yellow, the Home Point has not been recorded. 5. Push the throttle up slowly to take off or use Auto Takeoff. 6. Shoot photos and videos using the DJI Pilot app. 7. To land, hover over a level surface and gently pull down on the throttle to descend. 8. After landing, execute the CSC command or hold the throttle at its lowest position until the motors stop. 9. Turn off the Intelligent Flight Battery first, then the Remote Controller. 46 2015 DJI. All Rights Reserved. FlightPhantom 3 Standard User Manual When the Aircraft Status Indicators blink yellow rapidly during flight, the aircraft has entered Failsafe mode. A low battery level warning is indicated by the Aircraft Status Indicators blinking red slowly or rapidly during flight. Watch our video tutorials for more flight information. Video Suggestions and Tips 1. Go through the full pre-flight checklist before each flight. 2. Select the desired gimbal operation mode in the DJI Pilot app. 3. Only shoot video when flying in P-mode. 4. Always fly in good weather and avoid flying in rain or heavy wind. 5. Choose the camera settings that suit your needs. Settings include photo format and exposure compensation. 6. Perform flight tests to establish flight routes and preview scenes. 7. Push the control sticks gently to keep the aircrafts movement smooth and stable. 2015 DJI. All Rights Reserved. 47 FlightPhantom 3 Standard User Manual FAQ 48 2015 DJI. All Rights Reserved. Troubleshooting (FAQ) Can I remove the camera and attach my own?

No. The cameras that come with both models are permanently attached. Attempting to remove, replace, or modify the camera may damage the product and will void your warranty. Can I charge my Remote Controller and Intelligent Flight Battery at the same time?

While the Remote Controller charger and Intelligent Flight Battery charger have been integrated into one unit for your convenience, it is recommended that you only charge one item at a time. We recommend that you never charge both items using the same charger at the same time. What are the buttons on the back of my Remote Controller for?

The two buttons on the back of the Remote Controller can be customized and assigned to function as you choose through the DJI Pilot app. Refer to the manual for more information. How far can I fly my Phantom 3?

The signal transmission distance will vary depending on environmental conditions, but the Phantom 3 series can reach distances of up to 1.2 miles (2 kilometers) away from the pilot. What app should I use with my Phantom 3?

The Phantom 3 is compatible with the DJI Pilot app for iOS and Android, which is already used with the DJI Inspire. The app will detect which aircraft is connected and automatically adjust accordingly. Which mobile devices are compatible with the app?

The DJI Pilot app is only compatible with devices running iOS 8.0 or later or Android v4.1.2 or later. The following devices are recommended:

iOS: iPhone 5s, iPhone 6, iPhone 6 Plus, iPad Air, iPad Air Wi-Fi + Cellular, iPad mini 2, iPad mini 2 Wi-Fi

+ Cellular, iPad Air 2, iPad Air 2 Wi-Fi + Cellular, iPad mini 3, and iPad mini 3 Wi-Fi + Cellular. This app is optimized for iPhone 5s, iPhone 6, and iPhone 6 Plus Android: Samsung S5, Note 3, Sony Z3 EXPERIA, Google Nexus 7 II, Google Nexus 9, Mi 3, Nubia Z7 mini Support for additional Android devices will become available as testing and development continues. 2015 DJI. All Rights Reserved. 49 FAQ How do I use the Director automatic video editor?

Director is an automatic video editor built into the DJI Pilot app. After recording several video clips, simply tap Director from the apps home screen. You can then select a template and a specified number of clips, which are automatically combined to create a short film that can be shared immediately. How do I change the control mode of my Phantom 3?

By default, the Remote Controller is set to Mode 2. This means that the right control stick controls the movement of the aircraft and the left control stick controls the throttle and orientation of the aircraft. These controls can be changed to Mode 1 or set to a customized configuration in the DJI Pilot app. This is only recommended for advanced users. Can I use a Phantom 2 Remote Controller with the Phantom 3?

No. The Phantom 2 Remote Controller operates on a different frequency. The Phantom 2 Remote Controller operates at 5.8 GHz and the new Phantom 3 Remote Controller operates at 2.4 GHz. Can I use a Phantom 2 Intelligent Flight Battery with the Phantom 3?

No. The Phantom 3 uses a newly designed Intelligent Flight Battery with greater power. The Phantom 3 has a 4 cell battery with a capacity of 4480 mAh and a voltage of 15.2 V. My Phantom 3 does not turn off right away, is something wrong?

This is normal. After you attempt to power off the Intelligent Flight Battery, it may remain on for a few seconds as any video data is saved to the Micro SD card. This helps prevent your data from being lost or corrupted. Do I have to buy the Remote Controller separately?

No, there is no need to buy a separate Remote Controller. Your Phantom 3 comes with a Remote Controller that is already linked to the aircraft. Does my Phantom 3 support dual Remote Controllers?

No. The included Remote Controller can be used to control both the aircraft and the gimbal tilt at the same time. What does the P, A, F switch on the Remote Controller do?

This switch, called the Flight Mode Switch, allows you to toggle different flight modes:

P-mode, or Positioning mode, indicates that both GPS and the Vision Positioning System are active and your Phantom 3 will attempt to stabilize using both. In A-mode, or Attitude mode, the aircraft does not use GPS or the Vision Positioning System. Only the barometer is used for stabilization. The aircraft can still return to the Home Point as long as a sufficient GPS signal is available. F-mode, or Function mode, activates Intelligent Orientation Control (IOC) functionality. Refer to the IOC section in the Appendix of the User Manual. By default, only P-mode may be used. Refer to your user manual for instructions on unlocking the other modes. 50 2015 DJI. All Rights Reserved. FAQPhantom 3 Standard User Manual What is the Phantom 3 flight time?

Flight times will vary depending on environmental conditions and usage patterns, but the Intelligent Flight Battery is designed to provide up to 23 minutes of uninterrupted flight time when fully charged. How can I restore a video file if the power is turned off during recording?

Do not remove the Micro-SD card from the camera. If it has been removed, place it back in the camera. Turn the Phantom 3 on and wait approximately 30 seconds as the video file is restored. How can I ensure that my pictures and videos will be synchronized to my iOS album?

You may need to adjust the settings of your mobile device. Open the Settings menu, select the Privacy tab, select the Photos tab, and then toggle the switch next to the DJI Pilot app icon. If the Pilot app has not been granted access to your albums, the photos and videos cannot be synchronized. What should I do to land my Phantom 3 smoothly as possible?

Hover the aircraft over a flat, level surface. Slowly pull the throttle stick down until the aircraft touches the ground. Why is the discharge time of the battery not zero, even though I have never used it?

Every battery is tested prior to being packaged and shipped. This affects the discharge time of a new battery and is the reason that the discharge time is not zero. The battery is safe to use. Can the mobile device holder be used on the Phantom 2 series Remote Controller?

No, it cannot. How to safely operate the aircraft when encountering compass error?

A compass error may occur when the aircraft is flying close to strong electric magnetic sources (e.g. power transmission lines). Aircraft Status Indicators blink red and yellow rapidly when a compass error occurs and the DJI Pilot app will display one of the following messages:

Compass error, calibration required This warning message indicates the aircraft is receiving abnormal compass readings. It is recommended to power off the aircraft and re-calibrate the compass at a different location and then resume the flight. Compass error, exit P-GPS Mode This warning message indicates that the aircraft is drifting severely. Bring the aircraft to a higher altitude to gain enough GPS satellite locks when this warning message is prompted. The flight controller will automatically adjust the orientation of the aircraft in the midair to mitigate the drifts. The aircraft will switch back to P-GPS mode when the automatic adjustment is completed. 2015 DJI. All Rights Reserved. 51 FAQPhantom 3 Standard User Manual Appendix 52 2015 DJI. All Rights Reserved. Appendix Specifications Aircraft Weight (Battery &

Propellers Included) Max. Ascent Speed Max. Descent Speed Max. Speed Max. Flight Altitude Max. Flight Time Operating Temperature GPS Mode Gimbal Controllable Range Vision Positioning Velocity Range Altitude Range Operating Range Operating Environment Camera Sensor Lens ISO Range Electronic Shutter Speed Image Max. Size Still Photography Modes Supported SD Card Types Video Recording Modes Max. Bitrate Of Video Storage Supported File Formats 1280 g 5 m/s 3 m/s 16 m/s (ATTI mode, no wind) 6000 m Approximately 23 minutes 0C to 40C GPS Pitch: - 90 to + 30

< 8 m/s (2 m above ground) 30 cm-300 cm 30 cm-300 cm Brightly lit (lux > 15) patterned surfaces Sony EXMOR 1/2.3 Effective pixels:12 M (total pixels: 12.76 M) FOV 94 20mm(35mm format equivalent ) f/2.8 100-3200(video) 100-1600(photo) 8s -1/8000s 4000 x 3000 Single shot Burst shooting: 3/5/7 frames Auto Exposure Bracketing (AEB): 3/5 Bracketed frames at 0.7EV Bias Time-lapse Micro SD Max. capacity: 64 GB. Class 10 or UHS-1 rating required HD:1280x720p 24/25/30/48/50/60 25 Mbps FAT32/exFAT Photo: JPEG, DNG Video: MP4/MOV (MPEG-4 AVC/H.264) Operating Temperature Range 0C to 40C 2015 DJI. All Rights Reserved. 53 Appendix Phantom 3 Standard User Manual Remote Controller and WiFi Range Extender Remote Contoller Frequency Transmitting Distance WiFi Range Extender Frequency 5.725 GHz to 5.825 GHz CE: 400 m, FCC: 800 m 2412MHz to 2462MHz Operating Temperature Range Battery Mobile Device Holder 0C- 40C 2600 mAh Lithium Ion Smartphones 120 mA@3.7V 17.4 V 57 W Working Voltage Charger Voltage Rated Power Intelligent Flight Battery ( PH3-4480 mAh-15.2 V ) Capacity 4480 mAh 15.2 V Voltage LiPo 4S Battery Type 68 Wh Energy Net Weight 365 g

-10C- 40C Operating Temperature Max. Charging Power 100 W A p p e n d i x Aircraft Status Indicator Description Normal Red, Green and Yellow Flash Alternatively Turning on and Self-Diagnostics Green and Yellow Flash Alternatively Aircraft Warming Up Green Flashes Slowly Safe to Fly (P-mode with GPS and Vision Positioning) X2 Green Flashes Twice Safe to Fly (P-mode with Vision Positioning but without GPS) Yellow Flashes Slowly Warning Fast Yellow Flashing Slow Red Flashing Fast Red Flashing Red Flashing Alternatively Solid Red Safe to Fly (A-mode but No GPS and Vision Posi-

tioning) Remote Controller Signal Lost Low Battery Warning Critical Battery Warning IMU Error Critical Error Red and Yellow Flash Alternatively Compass Calibration Required 54 2015 DJI. All Rights Reserved. Phantom 3 Standard User Manual Intelligent Orientation Control (IOC) IOC allows users to lock the control orientation of the aircraft in different modes. There are three working modes for IOC that can be selected in the DJI Pilot app. IOC only works when the aircraft is in F-mode, therefore the user must toggle the flight mode switch to activate IOC. Refer to the table below:

Course Lock (CL) Home Lock (HL)*

Point of Interest (POI)*

The nose direction, at the time that CL is set, will remain the forward direction regardless of how the orientation and position of the aircraft changes. This will remain fixed until you reset it or exit CL mode. Record a Home Point (HP) and enter HL mode. The forward and backward controls will move the aircraft farther from and closer to the established Home Pont, regardless of how the orientation and position of the aircraft changes. Point of Interest. Record a point of interest (POI). The aircraft can then circle around the POI and the nose will always points toward the POI.

*Home Lock and Point of Interest feature are coming soon. IOC Requirements IOC is only available under the following conditions:

Modes IOC GPS enabled GPS counts Flight Distance Limits Course Lock Home Lock POI No Yes Yes None None Aircraft 10m Home Point Aircraft 5m~500m Point of Interest A p p e n d i x Using IOC Toggle the Flight Mode Switch F-mode and follow the instructions prompted on the DJI Pilot app to select the desired IOC mode. 2015 DJI. All Rights Reserved. 55 Phantom 3 Standard User Manual FCC Compliance FCC Warning Message This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This W321 should be installed and operated with minimum distance 20cm between the radiator&

your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. A p p e n d i x Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IC RSS warning This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent areil est conforme aux CNR d'Industrie Canada licables aux areils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'areil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'areil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 56 2015 DJI. All Rights Reserved. Phantom 3 Standard User Manual IC Radiation Exposure Statement:

This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This W321 should be installed and operated with minimum distance 20cm between the radiator&

your body. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet quipement est conforme aux limites d'exposition de rayonnement RSS tablies pour un environnement non contr?l. Cette M100 devrait tre install et utilis avec une distance minimale de 20cm entre le radiateur & votre corps. Cet metteur ne doit pas tre co-implant ou fonctionner en conjonction avec toute autre antenne ou transmetteur. Toute modification non expressment approuves par la partie responsable de la conformit pourrait annuler l'autorit de l'utilisateur utiliser cet appareil. KCC Warning Message

. NCC Warning Message A p p e n d i x 2015 DJI. All Rights Reserved. 57 The content is subject to change. Download the latest version from http://www.dji.com/product/phantom-3 If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. 2015 DJI. All Rights Reserved.

PHANTOM 3 Standard User Manual V1.0 2015.04 Using this manual Legends Warning Important Hints and Tips Reference Read Before the First Flight Read the following documents before using the Phantom 3 Standard:

1. In the Box 2. Phantom 3 Standard User Manual 3. Phantom 3 Standard Quick Start Guide 4. Phantom 3 Standard Guidelines and Disclaimer 5. Phantom 3 Standard Intelligent Flight Battery Safety Guidelines We recommend that you watch all tutorial videos on the official DJI website and read the Disclaimer before you fly. Prepare for your first flight by reviewing the Phantom 3 Standard Quick Start Guide and refer to the User Manual for more detailed information. Video Tutorials Please watch the tutorial videos at the link below, which demonstrates how to use Phantom 3 Standard aircraft http://www.dji.com/product/phantom-3/video Download the DJI Pilot app Download and install the DJI Pilot app before using the aircraft. Scan the QR code to the right to download the latest version. The Android version of the DJI Pilot app is compatible with Android 4.1.2 or later. The iOS version of the DJI Pilot app is compatible with iOS 8.0 or later. 2 2015 DJI. All Rights Reserved. Contents Using this manual Legends Read Before the First Flight Video Tutorials Download the DJI Pilot app Product Profile Introduction Feature Highlights Preparing the Aircraft Aircraft Diagram Remote Controller Diagram Aircraft Flight Controller Flight Mode Flight Status Indicator Return-to-Home (RTH) Smart RTH Low Battery RTH Failsafe RTH Vision Positioning System Flight Recorder Attaching and Detaching the Propellers DJI Intelligent Flight Battery Remote Controller Remote Controller Profile Using the Remote Controller Remote Controller Status LED Linking the Remote Controller Remote Controller Compliance Version 2 2 2 2 6 6 7 8 8 11 11 11 12 12 13 14 14 16 16 17 23 23 27 28 29 2015 DJI. All Rights Reserved. 3 Camera and Gimbal Camera Profile Gimbal DJI Pilot App Camera Director Store Discovery Flight Flight Environment Requirements Flight Limits and No-Fly Zones Preflight Checklist Calibrating the Compass Auto Takeoff and Auto Landing Flight Test Starting/Stopping the Motors Troubleshooting (FAQ) Appendix Specifications Intelligent Orientation Control (IOC) FCC Compliance 31 32 35 38 38 38 40 40 44 44 45 46 46 53 55 56 4 2015 DJI. All Rights Reserved. Product Profile This section introduces the Phantom 3 Standard and lists the components of the aircraft and remote controller. 2015 DJI. All Rights Reserved. 5 Product Profile Introduction The Phantom 3 Standard represents the next generation of DJI quadcopters. It is capable of capturing 1080P video and video signal out of the box. The built-in camera has an integrated gimbal to maximize stability while minimizing both weight and size. Feature Highlights Camera and Gimbal: With the Phantom 3 Standard, youre shooting 1080p video and capturing 12 megapixel pho-

tos that look crisper and cleaner than ever. An enhanced sensor gives you greater clarity, lower noise, and better pictures than any previous flying camera. DJI Intelligent Flight Battery: The 4480 mAh DJI Intelligent Flight Battery features upgraded battery cells and an advanced power management system. Built-in WiFi Extender: The wifi extender is integrated into the remote controller to allow a easy connection to teh aircraft. Flight Controller: The next-generation flight controller has been updated to provide a safer, more reliable flight experience. A newly implemented flight recorder stores critical data from each flight. 6 2015 DJI. All Rights Reserved. Product Profile Preparing the Aircraft Removing Gimbal Clamp Remove the gimbal clamp by sliding it to the right (when facing the nose of the aircraft), as shown below. Attaching the Propellers:

Mount the propellers with black dots on to motors with black axes and spin counter-clockwise to secure. Mount the propellers with sliver dots on to motors with sliver axes and spin clockwise to secure. Be sure all propellers are securely in place. Place all propellers onto the correct motors and tighten by hand to lock them in position. Preparing the Remote Controller:

1. Twist the Phone Holder to face outwards and fix in position. 2 . Ensure the battery is fully charged. 3. Be sure S1 and S2 are switched to the upper most position. The LED will go green if the Remote Controller is functioning. S2 S1 2015 DJI. All Rights Reserved. 7 Product ProfilePhantom 3 Standard User Manual Aircraft Diagram

[10]

[11]

[1] Gimbal and Camera

[2] Camera Micro-SD Card Slot

[3] Aircraft Micro-USB Port

[4] Front LED Indicator

[5] Landing gear

[6] Motor

[7] Rear LED Indicator

[8] Antennas 8 2015 DJI. All Rights Reserved. Product ProfilePhantom 3 Standard User Manual Remote Controller Diagram

[1] Power Button

[2] Status LED

[3] Battery Level LEDs

[4] Neck Strap Securing Hole

[5] S1 Switch

[6] S2 Switch

[7] Control Stick

[8] Phone Holder

[9] Antennas

[10] Gimbal Dial

[11] Charging Port 2015 DJI. All Rights Reserved. 9 Product ProfilePhantom 3 Standard User Manual Aircraft This section introduces the features of the Flight Controller, Vision Positioning System, and the Intelligent Flight Battery 10 2015 DJI. All Rights Reserved. Aircraft Flight Controller The Phantom 3 Standards flight controller features several important upgrades, including a new flight mode. Safe-

ty modes include Failsafe and Return-to-Home. These features ensure the safe return of your aircraft if the control signal is lost. The flight controller can also save critical flight data from each flight to the on-board storage device. The new flight controller also provides increased stability. Flight Mode Two flight modes are available. The details of each flight mode are found below:

P-mode (Positioning) : P-mode works best when GPS signal is strong. There are three different states of P-mode, which will be automatically selected by the Phantom 3 Standard depending on signal strength of GPS. P-GPS: GPS and Vision Positioning both are available. The aircraft is using GPS for positioning. P-ATTI: Neither GPS nor Vision Positioning is available. The aircraft is using only its barometer for positioning, so only altitude can be stabilized. A-mode (Attitude): GPS is not used for stabilization. The aircraft only uses its barometer. The aircraft can still auto-

matically return to the home point if the control signal is lost and the Home Point was recorded successfully. F-mode (Function): Intelligent Orientation Control (IOC) is activated in this mode. For more information about IOC, refer to the IOC section in the Appendix. Use the Flight Controller mode switch to change the flight mode of the aircraft, refer to the Flight Mode Switch on Page 26 for more information. Flight Status Indicator The Phantom 3 Standard has Front LEDs and Aircraft Status Indicators. The positions of these LEDs are shown in the figure below:

Front LED Aircraft Status Indicator The Front LEDs show the orientation of the aircraft. The Front LEDs glow solid red when the aircraft is turned on to indicate the front (or nose) of the aircraft. The Aircraft Status Indicators communicate the system status of the flight controller. Refer to the table below for more information about the Aircraft Status Indicators:

2015 DJI. All Rights Reserved. 11 Aircraft Aircraft Status Indicator Description Normal Red, Green and Yellow Flash Alternatively Turning On and Self Diagnostic Testing Green and Yellow Flash Alternatively Warming Up Green Flashes Slowly X2 Green Flashes Twice Yellow Flashes Slowly Warning Fast Yellow Flashing Slow Red Flashing Fast Red Flashing Red Flashing Alternatively Solid Red Safe to Fly (P-mode with GPS and Vision Positioning) Safe to Fly (P-mode with Vision Positioning but without GPS) Safe to Fly (A-mode but No GPS and Vision Positioning) Remote Controller's Signal Lost Low Battery Warning Critical Battery Warning IMU Error Critical Error Red and Yellow Flash Alternatively Compass Calibration Required Return-to-Home (RTH) The Return-to-Home (RTH) function brings the aircraft back to the last recorded Home Point. There are three types of RTH procedures: Smart RTH, Low Battery RTH, and Failsafe RTH. This section describes these three scenarios in detail. GPS Description If a strong GPS signal was acquired before takeoff, the Home Point is the location from which the aircraft was launched. The GPS signal strength is indicated by the GPS icon (

). The aircraft status indicator will blink rapidly when the home point is recorded. Home Point Smart RTH Use the RTH button on the remote controller (refer to RTH button on page 26 for more information) or tap the RTH button in the DJI Pilot app and follow the on-screen instructions when GPS is available to ini-

tiate Smart RTH. The aircraft will then automatically return to the last recorded Home Point. You may use the remote controllers control sticks to control the aircrafts position to avoid a collision during the Smart RTH process. Press and hold the Smart RTH button once to start the process, and press the Smart RTH button again to terminate the procedure and regain full control of the aircraft. 12 2015 DJI. All Rights Reserved. AircraftPhantom 3 Standard User Manual Low Battery RTH The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point that may affect the safe return of the aircraft. Users are advised to return home or land the aircraft immediately when prompted. The DJI Pilot app will display a notice when a low battery warning is triggered. The aircraft will automatically return to the Home Point if no action is taken after a ten-second countdown. The user can cancel the RTH procedure by pressing the RTH button on the remote controller. The thresholds for these warnings are automatically determined based on the aircrafts current altitude and distance from the Home Point. The aircraft will land automatically if the current battery level can only support the aircraft long enough to descend from its current altitude. The user can still use the remote controller to alter the aircrafts orientation during the landing process. The Battery Level Indicator is displayed in the DJI Pilot app, and is described below:

Critical Low battery level warning(Red) Sufficient battery level(Green) Low battery level warning(Yellow) Remaining flight time Power requires to return home Battery level Indicator Battery Level Warning Remark Aircraft Status Indicator DJI Pilot app Flight Instructions Low battery level warning The battery power is low. Please land the aircraft. Aircraft status indicator blinks RED slowly. Critical Low battery level warning The aircraft must land immediately. Aircraft status indicator blinks RED quickly. Tap Go-home to have the aircraft return to the Home point and land automatically, or Cancel to resume normal flight. If no action is taken, the aircraft will automatically go home and land after 10 seconds. Remote controller will sound an alarm. The DJI Pilot app display will flash red and the aircraft will start to descend. The remote controller will sound an alarm. Fly the aircraft back and land it as soon as possible, then stop the motors and replace the battery. Allow the aircraft to descend and land automatically. Estimated remaining flight time Estimated remaining flight based on current battery level. N/A N/A N/A 2015 DJI. All Rights Reserved. 13 AircraftPhantom 3 Standard User Manual When Critical battery level warning is triggered and the aircraft begins to land automatically, you may push the throttle upward to make the aircraft hover at its current altitude, giving you an opportunity to navigate to a more appropriate landing location. The colored zones and markers on the battery level indicator bar reflect the estimated remaining flight time. They are automatically adjusted according to the aircrafts current location and status. Failsafe RTH If the Home Point was successfully recorded and the compass is functioning normally, Failsafe RTH will be automatically activated if the remote controller signal is lost for more than three seconds. The Return-

to-Home process may be interrupted and the operator may regain control of the aircraft if the remote controller signal connection is re-established. Failsafe Illustration 1 Record Home Point 2 Flying 3 Remote Control signal lost LED Flight Indicator Yellow flashing 4 Signal lost lasts 3s, begin to go home Green flashing

>3s LED Flight Indicator Green flashing LED Flight Indicator Yellow flashing 5 Fly back to home point 6 Landing after hovering 15s Height over home point>20m Elevate to 20m 20m Height over home point<=20m LED Flight Indicator Yellow flashing LED Flight Indicator Yellow flashing LED Flight Indicator Yellow flashing The aircraft cannot avoid obstruction during the Failsafe RTH, therefore, it is important to set an suitable Failsafe altitude before each flight. Launch the DJI Pilot app and enter Camera and select MODE > Advanced Settings > Failsafe mode to set the Failsafe altitude. The aircraft will stop its ascent and return to the Home Point immediately if the throttle stick is moved during the Failsafe RTH procedure. 14 2015 DJI. All Rights Reserved. AircraftPhantom 3 Standard User Manual 2015 DJI. All Rights Reserved. 15 AircraftPhantom 3 Standard User Manual Flight Recorder Flight data is automatically recorded to the internal storage of the aircraft. This includes flight telemetry, aircraft status information, and other parameters. To access these data, connect the aircraft to the PC through the Micro-USB port and launch the DJI Pilot app. Attaching and Detaching the Propellers Use only DJI approved propellers with your Phantom 3 Standard. The grey and black nuts on the propeller indicate where they should be attached and in which direction whey should spin. To attach the propellers properly, match the nut color with the motor axis color. Propellers Figure Silver Dot Black Dot Attach On Motors with a grey axes Motors with a black axes Legends Lock : Turn the propellers in the indicated direction to mount and tighten. Unlock : Turn the propellers in the indicated direction to loosen and remove. Attaching the Propellers 1. Be sure to remove the warning stickers from the motors before attaching the propellers. 2. Attach the propellers with silver dots onto the motors with silver axes and spin the propellers clockwise to secure them in place. Attach the propellers with black dots onto the motors with black axes and spin the propellers counter-clockwise to secure them in place. Be sure to tighten each propeller by hand before flight. 16 2015 DJI. All Rights Reserved. AircraftPhantom 3 Standard User Manual Ensure propellers are attached to its corresponding motors, otherwise the aircraft cannot take off. Wear gloves when handling propellers. Hand tighten each of the propellers on the corresponding motors to ensure it is attached firmly. Detaching the Propellers Hold the motor in place with one hand, then spin the propeller in the indicated unlock direction. Check that the propellers and motors are installed correctly and firmly before every flight. Ensure that all propellers are in good condition before each flight. DO NOT use aged, chipped, or broken propellers. To avoid injury, STAND CLEAR of and DO NOT touch propellers or motors when they are spinning. ONLY use original DJI propellers for a better and safer flight experience. DJI Intelligent Flight Battery The DJI Intelligent Flight Battery has a capacity of 4480 mAh, a voltage of 15.2 V, and a smart charge/

discharge functionality. It should only be charged using an appropriate charger that has been approved by DJI. Intelligent Flight Battery Charger The Intelligent Flight Battery must be fully charged before using it for the first time. Refer to

"Charging the Intelligent Flight Battery" for more information. Be aware that the output power of the supplied Phantom 3 Standard charger is 100W. DJI Intelligent Flight Battery Functions 1. Battery Level Display: the LED indicators display the current battery level. 2. Battery Life Display: the LEDs display the current battery power cycle. 3. Auto-Discharging Function: To prevent swelling, the battery automatically discharges to below 65% of total power when it is idle for more than ten days. It takes around two days to discharge the battery to 65%. It is normal to feel moderate heat being emitted from the battery during the discharge process. Discharge thresholds can be set in the DJI Pilot app. 4. Balanced Charging: Automatically balances the voltage of each battery cell when charging. 5. Overcharge Protection: Charging automatically stops when the battery is fully charged. 6. Temperature Detection: The battery will only charge when the temperature is between 0C (32F) and 40C (104F). 7. Over Current Protection: The battery stops charging when high amperage (more than 8 A) is detected. 8. Over Discharge Protection: To prevent over-discharge damage, discharging automatically stops when the battery voltage reaches 12 V. 9. Short Circuit Protection: Automatically cuts the power supply when a short circuit is detected. 2015 DJI. All Rights Reserved. 17 AircraftPhantom 3 Standard User Manual 10. Battery Cell Damage Protection: The DJI Pilot app displays a warning message when a damaged battery cell is detected. 11. Battery Error History: Browse the battery error history in the DJI Pilot app. 12. Sleep Mode: To save power, the battery enters sleep mode after 20 minutes of inactivity. 13. Communication: Information pertaining to the batterys voltage, capacity, current, etc. is transmitted to the aircrafts main controller. Refer to Phantom 3 Standard Intelligent Flight Battery Safety Guidelines before use. Users take full responsibility for all operations and usage. Using the Battery LED1 LED2 LED3 LED4 Power Button (Bulit-in LED) Battery Level Indicators Turning ON/OFF Turning On: Press the Power Button once, then press again and hold for 2 seconds to turn on. The Power LED will turn red and the Battery Level Indicators will display the current battery level. Turning Off: Press the Power Button once, then press again and hold for 2 seconds to turn off. The battery power LED will flash when powering off the Phantom to allow automatically stopping of a recording during the event recording wasnt stopped. Low Temperature Notice:

1. Battery capacity is significantly reduced when flying in low temperature (< 0C) environments. 2. It is not recommended that the battery be used in extremely low temperature (< -10C) environments. Battery voltage should reach the appropriate level when operating environment with temperatures between -10C and 5C. 3. End the flight as soon as the DJI Pilot app displays the Low Battery Level Warning in low temperature environments. 4. Keep the battery indoors to warm it before flying in low temperature environments. 5. To ensure optimal performance of the battery, keep the battery temperature above 20C. 6. The charger will stop charging the battery if the battery cells temperature is not within the operating range (0C ~ 40C ). In cold environments, insert the battery into the battery compartment and allow the aircraft for approximately 1-2 minutes to warm up before taking off. Checking the Battery Level The Battery Level Indicators display how much power remains. When the battery is turned off, press the Power Button once. The Battery Level Indicators will light up to display the current battery level. See below for details. 18 2015 DJI. All Rights Reserved. AircraftPhantom 3 Standard User Manual The Battery Level Indicators will also show the current battery level during charging and discharging. The indicators are defined below.

: LED is on.

: LED is off.

: LED is flashing. Battery Level LED1 LED2 LED3 LED4 Battery Level 87.5%~100%

75%~87.5%

62.5%~75%

50%~62.5%

37.5%~50%

25%~37.5%

12.5%~25%

0%~12.5%

=0%

Battery life Battery life refers to how many more times the battery can be discharged and recharged before it must be replaced. When the battery is turned off, press and hold the Power Button for 5 seconds to check the battery life. The Battery Level Indicators will light up and/or blink for two seconds, as shown below:

Battery Life LED1 LED2 LED3 LED4 Battery Life 90%~100%

80%~90%

70%~80%

60%~70%

50%~60%

40%~50%

30%~40%

20%~30%

below 20%

When battery life reaches 0%, it can no longer be used. For more information about the battery, launch the DJI Pilot app and check the information that is listed under the battery tab. 2015 DJI. All Rights Reserved. 19 AircraftPhantom 3 Standard User Manual Charging the Intelligent Flight Battery 1. Connect the Battery Charger to a power source (100-240 V 50/60 Hz). 2. Open the Protection Cap and connect the Intelligent Flight Battery to the Battery Charger. If the battery level is above 95%, turn on the battery before charging. 3. The Battery Level Indicator will display the current battery level as it is charging. 4. The Intelligent Flight Battery is fully charged when the Battery Level Indicators are all off. 5. Air-cool the Intelligent Flight Battery after each flight. Allow its temperature to drop to room temperature before storing it for an extended period. We do not recommend charging the Intelligent Flight Battery and remote controller with the standard charger at the same time, otherwise the charger may overheat. Always turn off the battery before inserting it or removing it from the Phantom 3 Standard. Never insert or remove a battery when it is turned on. Intelligent Flight Battery Charger Power Outlet Battery Level Indicators While Charging LED1 LED2 LED3 LED4 Battery Level 0%~25%

25%~50%

50%~75%

75%~100%

Fully Charged Battery Protection LED Display The table below shows battery protection mechanisms and corresponding LED patterns. Battery Level Indicators while Charging LED1 LED2 LED3 LED4 Blinking Pattern Battery Protection Item LED2 blinks twice per second Over current detected LED2 blinks three times per second Short circuit detected LED3 blinks twice per second Over charge detected LED3 blinks three times per second Over-voltage charger detected LED4 blinks twice per second Charging temperature is too low LED4 blinks three times per second Charging temperature is too high 20 2015 DJI. All Rights Reserved. AircraftPhantom 3 Standard User Manual After these issues are resolved, press the Power Button to turn off the Battery Level Indicator. Unplug the Intelligent Flight Battery from the charger and plug it back in to resume charging. Note that you do not need to unplug and plug in the charger in the event of a room temperature error; the charger will resume charging when the temperature is within the allowable range. DJI does not take any responsibility for damage caused by third-party chargers. How to discharge your Intelligent Flight Battery:

Slow : Place the Intelligent Flight Battery into the Phantom 3 Standards battery compartment and turn it on. Leave it on until there is less than 8% of power left, or until the battery can no longer be turned on. Launch the DJI Pilot app to check battery levels. Rapid : Fly the Phantom 3 Standard outdoors until there is less than 8% of power left, or until the battery can no longer be turned on. 2015 DJI. All Rights Reserved. 21 AircraftPhantom 3 Standard User Manual Remote Controller This sec tion describes the features of the remote controller and includes instructions for controlling the aircraft and the camera. 22 2015 DJI. All Rights Reserved. Remote Controller Remote Controller Profile The Phantom 3 Standard remote controller is a multi-function wireless communication device that includes aircraft remote control system. The wireless transmission system operates at 5.8 GHz while the WiFi Range Extender is operating at 2.4GHz. The remote controller features a number of camera control functions, such as taking and previewing photos and videos, as well as controlling gimbal motion. The remote controller is powered by a 2S rechargeable battery. The battery level is displayed via LED indicators on the front panel of the remote controller. Compliance Version: The remote controller is compliant with both CE and FCC regulations. Operating Mode: Control can be set to Mode 1 or Mode 2, or to a custom mode. Mode 1: The right stick serves as the throttle. Mode 2: The left stick serves as the throttle. To prevent transmission interference, do not operate more than three aircrafts in the same area. Power on the Remote Controller

(1) Set S1 and S2 switches to the upper most position and place all sticks in the mid-point.

(2) Toggle power switch to the right to switch on.

(3) There will be a power on indicator beep. If the remote control is set to be CE compliant, then there will be one beep, while the FCC compliant version will emit two beeps. The battery level indicator displays the current battery level. The indicator will blink green quickly, indicating the remote control and receiver are linking. Once fully linked, the power indicator will change to a solid green. If the low voltage warning alert sounds (refer to Remote Control Power LED Status Information (Page 17) for details), please recharge the battery as soon as possible. Using the incorrect type of charging cable may cause damage. Recharge the battery after extended period storage. 2015 DJI. All Rights Reserved. 23 Remote Controller Remote Control Operation The Remote Control is set to Mode 2 by default. Stick Neutral/ mid point: Control sticks of the Remote Control are placed at the central position. Move the Stick: The control stick is pushed away from the central position. Remote Control

(Mode 2)

(

Aircraft indicates nose direction) Operation details Vertical movements on the left stick control elevation. Push the stick up to ascend and down to descend. When both sticks are centered the Phantom will hover in place. Push the throttle stick upward beyond the centered

(neutral) position to take off. Push the throttle gently to prevent sudden and unexpected elevation. Horizontal movements on the left stick control the rudder. Push left to rotate counter clock-wise and right for clockwise. If the stick is centered, the Phantom will fly straight. The more the stick is moved, the faster the Phantom will rotate. Vertical movements on the right stick control forward and backward pitch. Push up to fly forward and down to fly backward. The Phantom will hover in place if the stick is centered. Push the stick further for a larger pitch angle

(maximum 35) and faster flight. Horizontal movements on the right stick control left and right pitch. Push left to fly left and right to fly right. The Phantom will hover in place if the stick is centered. Push the stick further for a larger pitch angle

(maximum 35) and faster flight. Left Dial: Turn the dial to the right, and the camera will shift to point upwards.Turn the dial to the left, and the camera will shift to point downwards. The camera will keep its current position if the dial is static. The S1 switch is used for compass calibration. Toggle the S1 from position 1 to position 3 and back approximately 5 times to enter into compass calibration mode. In Naza-M mode, the S1 switch is used to switch between control modes and enter compass calibration. S2 is used to record a Home point manually. After a Home point has been recorded automatically, flipping S2 from position 1 to position 3 and back 5 times

(or more) rapidly will move the Home point to the Phantoms current location. In addition, you can enable Dynamic Home Point feature in DJI VISION App. In Naza-M working mode, S2 is be used for IOC. Position 1 Position 2 Position 3 Position 1 Position 2 Position 3 24 2015 DJI. All Rights Reserved. Remote ControllerPhantom 3 Standard User Manual Battery Level Indicator Built-in LiPo Battery: The remote control includes a rechargeable LiPo battery with a capacity of 2000mAh. You can monitor the current battery level using the LED indicators on the front panel of the remote control as the figure shown:

The remote control will show a blinking LED and sound an alert when the voltage drops below 3.45V, then automatically power off after 3 seconds. This process will repeat even if you power cycle the remote control. If this low voltage warning occurs during flight, the remote control will automatically power off, causing the aircraft to enter Failsafe mode, which cannot be interrupted (refer to Failsafe Function (Page27) for details). It is strongly recommended that you recharge the battery immediately when the 3.45V-3.5V low voltage warning occurs. Antenna Orientation Keep the antennas pointing skyward, perpendicular to the ground for maximum remote control range during flight. For maximum range and reliability, Remote Control antenna should point skywards with no obstructions between it and the Phantom. Obstacles may cause Return to Home to trigger. Phone Holder should not block the antenna. Linking the Remote Control and Receiver A 5.8G receiver is built in to the Phantom 3 Standard aircraft. Its link button and indicator are located on the underside of the phantom, as shown in Figure 26. The Remote Control and the receiver are paired before delivery. Only use this button if you have replaced your Remote Control or receiver. Linking Procedures

(1) Power off the Remote Control, power on the aircraft. You will see the link indicator blinking red.

(2) Press the link button with a thin object and hold until the link indicator blinks yellow. Release the link button.

(3) Power on the Remote Control. Link indicator will switch off, showing that a link has been successfully established. Link Button & Link Indicator 2015 DJI. All Rights Reserved. 25 Remote ControllerPhantom 3 Standard User Manual Link Indicator Link Indicator Description Next Operation Red flashing No signal received. Switch on the Remote Control or perform a link procedure. Yellow flashing Ready to link. Switch on the Remote Control. 5.8 Compliance Version Configuration As power levels vary between regulators, the Phantom Remote Controls power output can be adjusted by twisting the CE/FCC Control Knob (Figure 27) on the back of the Remote Control using a flathead screwdriver. For CE compliance, set the Remote Control to CE with a full counterclockwise turn. For FCC compliance, set the Remote Control to FCC with a full clockwise turn. Be sure to follow relevant local regulations. Compliance can be configured using the PHANTOM RC Assistant. Select CE compliance version in Assistant to set it, or do the same with FCC compliance version. Turn the CE/FCC Control knob gently to avoid damage. CE compliant devices have an effective remote control range of 400 meters in open spaces due to power limitations. FCC compliant devices have an effective range of 800 meters in open spaces. Watch your flight distance as the Phantom 3 Standard aircraft will enter Failsafe mode (auto-

landing or go home and land) if it flies beyond the relevant range limits. Always follow local laws and regulations. It is recommended to use a 2.4mm flathead screwdriver for adjustments. There is another potentiometer for reserved use. 26 2015 DJI. All Rights Reserved. Remote ControllerPhantom 3 Standard User Manual Phantom 3 Standard User Manual If the low voltage warning alert sounds (refer to Remote Control Power LED Status Information (Page 17) for details), please recharge the battery as soon as possible. Using the incorrect type of charging cable may cause damage. Recharge the battery after extended period storage. Remote Control Power LED Status Information Power LED Indicator Sound Solid Green Solid Red Solid Yellow None None None Remote Control Status Functioning normally. Charging( remote control is powered off) Remote control joysticks calibration error, need to be re-

calibrate. Solid Red BB---BB---BB Low voltage (from 3.5V-3.53V), recharge the remote control. Quick Red flashing B-B-B...... Slow Green flashing B--B--B...... Critical low voltage (from 3.45V-3.5V). Recharge the remote control immediately. Alert will sound after 15 minutes of inactivity. It will stop once you start using the remote control. R e m o t e C o n t r o l l e r 2015 DJI. All Rights Reserved. 27

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT Uncover View EUT Uncover View EUT Uncover View EUT Main Board Top View EUT Main Board Bottom View EUT Main Board Top Uncover View EUT 5.8GHz Module View EUT Uncover View EUT GPS Top View EUT GPS Top Uncover View EUT GPS Bottom View EUT GPS Label View EUT Light Board Top View EUT Light Board Bottom View EUT Camera Uncover View EUT Camera Uncover View EUT Camera Board Top View EUT Camera Board Bottom View EUT Camera Board Top Uncover View EUT 2.4GHz Module View EUT Camera Uncover View EUT Connect Board Top View EUT Connect Board Bottom View EUT Sensor Board Top View EUT Sensor Board Bottom View EUT 2.4GHz Antenna View EUT 2.4GHz Antenna Top View EUT 2.4GHz Antenna Bottom View EUT 5.8GHz Antenna View EUT Adapter Top View EUT Adapter Bottom View EUT Adapter Label View EUT Battery Top View EUT Battery Bottom View

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT All View EUT Top View EUT Bottom View EUT Front View EUT Right View

EXHIBIT A - FCC ID LABELING AND LOCATION FCC ID Label Proposed FCC ID Label Location Label Here The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

SZ DJI TECHNOLOGY CO., LTD. Add:14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China Tel: 0755-86152250 Fax: 0755-86965903 Date: 2015-4-20 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Request of confidentiality for FCC ID: SS3-WM3211503 To Whom It May Concern:

Pursuant to Sections 0.457 and 0.459 of the Commissions Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, SZ DJI TECHNOLOGY CO., LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Weare also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give SZ DJ1 TECHNOLOGY CO., LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows:

PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description 1 Block Diagram PERMANENT 2 Circuit Description 3 Schematic 4 External and Internal Photos SHORT-TERM 5 Test-Setup Photos 6 User Manual The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, Signature:

Lisa Li Visa \A Certification Supervisor ihja

SZ DJI TECHNOLOGY CO., LTD. Add: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China Tel: 0755-86152250 Fax: 0755-86965903 FCC Authorization Date: 2015-4-20 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We ,SZ DJI TECHNOLOGY CO., LTD., Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Clients signature . VA Lisa Li Visa Certification Supervisor E-mail: lisa. li@dji.com Tel: 0755-86152250 Add: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China QA-FR-170-B ihja