FCC ID: SS3-M3001910 Matrice 300 RTK

MATRICE 300 RTK Quick Start Guide

Kurzanleitung Gua de inicio rpido Guide de dmarrage rapide Guida di avvio rapido Snelstartgids Guia de incio rpido Guia de Incio Rpido

v1.0

CHS

CHT

JP

KR DE

ES

FR

IT

NL

PT-PT

PT-BR

RU

1 Matrice 300 RTK

13 14 1 14 13 12 2 3 15 16 17 18 19 10 9 6 7 5 8 11 4 35 23 22 24 21 20 27 25 26 Top view 27 27 31 30 29 28 Bottom view 32 33 34 Rear view

2 DJI Smart Controller Enterprise

13 16 2 16 3 4 1 5 6 15 12 11 9 10 8 7 14 16 17

28 29 26 25 27 30 31 18 19 20 21 22 24 23

3 Using Matrice 300 RTK

1. Downloading the DJI Pilot App

Internet

2. Charging the Batteries TB60 Intelligent Flight Battery and WB37 Intelligent Battery 1 2 3

Smart Controller

4 3. Preparing the Smart Controller Mounting the WB37 Intelligent Battery 1 2

3 1 2 3

Checking the Battery Level and Turning On

Adjusting the Antennas

80

5 4. Preparing the Aircraft

Installing the Landing Gears

Unfolding the Aircraft

11 2

2 11 6 Mounting the Gimbal and Camera

11 2 3

Mounting the Intelligent Flight Batteries / Checking the Battery Level

Turning On the Aircraft

5. Flight

Manual Takeoff / Landing

7

Up

Forward Down Backward Turn Left Turn Right Left Right

Aircraft

6.77

6.36

8

Smart Controller

Vision System

Infrared Sensing System

Intelligent Flight Battery

Auxiliary Light

FPV Camera

For more information, read the user manual:

https://www.dji.com/matrice-300

This content is subject to change without prior notice. MATRICE is a trademark of DJI. Copyright 2020 DJI All Rights Reserved.

9

MATRICE 300 RTK DISCLAIMER AND SAFETY GUIDELINES HAFTUNGSAUSSCHLUSS UND SICHERHEITSVORSCHRIFTEN RENUNCIA DE RESPONSABILIDAD Y DIRECTRICES DE SEGURIDAD CLAUSE DEXCLUSION DE RESPONSABILIT ET CONSIGNES DE SCURIT LIMITAZIONI DI RESPONSABILIT E DIRETTIVE SULLA SICUREZZA DISCLAIMER EN VEILIGHEIDSRICHTLIJNEN ISENO DE RESPONSABILIDADE E DIRETRIZES DE SEGURANA DECLARAO DE EXONERAO DE RESPONSABILIDADE E DIRETRIZES DE SEGURANA v1.0 2020.02 EN Contents NOTICE Glossary Pre-flight Checklist Disclaimer and Warning Before You Begin Individual Parts Product Care Flight Condition Requirements Flight Modes, Functions and Warnings Compliance with Regulations & GEO Zones CHS CHT JP GEO KR

, GEO DE Inhalt Sicherheitsvorschriften auf einen Blick HINWEIS Glossar Checkliste fr die Flugvorbereitung Haftungsausschluss und Warnhinweis Bevor Sie anfangen Einzelteile Pflege des Produkts Anforderungen an die Flugbedingungen Flugmodi, Funktionen und Warnhinweise Beachtung von Vorschriften und GEO-Zonen ES Contenido Seguridad de un vistazo AVISO Glosario Lista de comprobacin previa al vuelo Renuncia de responsabilidad y advertencia Antes de comenzar 4 4 4 4 5 5 7 7 7 9 10 11 12 12 12 12 14 14 15 16 17 18 19 19 19 19 21 21 22 23 24 26 26 26 26 27 27 29 29 29 31 32 34 34 34 34 35 35 37 37 37 39 40 42 42 42 42 43 43 45 45 45 47 48 50 50 50 50 51 Piezas individuales Cuidado del producto Requisitos de condiciones de vuelo Modos de vuelo, funciones y advertencias Cumplimiento de normativas y zonas GEO FR Sommaire Scurit Aperu REMARQUE Glossaire Liste des vrifications avant le vol Clause dexclusion de responsabilit et mise en garde Avant de commencer Pices individuelles Entretien du produit Exigences relatives aux conditions de vol Modes de vol, fonctions et avertissements Conformit aux rglementations et aux zones GEO IT Sommario Sicurezza in sintesi AVVISO Glossario Elenco dei controlli preliminari Limitazioni di responsabilit e avvertenze Prima di cominciare Componenti Cura del prodotto Requisiti delle condizioni di volo Modalit di volo, funzioni e avvertenze Conformit alle normative e zone GEO NL Inhoud Veiligheid in n oogopslag OPMERKING Verklarende woordenlijst Checklist ter voorbereiding van de vlucht Disclaimer en waarschuwing Voordat u begint Afzonderlijke onderdelen Productonderhoud Vereisten voor vluchtomstandigheden Vliegstanden, functies en waarschuwingen Naleving van regelgeving en voorschriften ten aanzien van PT Contedo Resumo de segurana ATENO Glossrio Lista de verificao antes do voo Declarao de exonerao de responsabilidade e aviso Antes de comear Peas individuais Cuidados com o produto Requisitos da condio de voo Modos de voo, funes e avisos Conformidade com regulamentos e Zonas GEO PT-BR Contedo Noes de segurana AVISO Glossrio Lista de verificao pr-voo Iseno de Responsabilidade e Advertncia Antes de comear Peas individuais Cuidados com o produto Requisitos de condies de voo Conformidade com regulamentos e zonas GEO RU 51 53 53 53 55 56 58 58 58 58 59 59 61 61 61 63 64 66 66 66 66 67 67 69 69 69 71 72 74 74 74 74 75 75 77 77 77 79 80 82 82 82 82 83 83 85 85 85 87 88 90 90 90 90 91 91 93 93 95 96 98 98 98 98 99 99 101 102

, 102

- GEO 104 Compliance Information 105 1 The DJITM MATRICETM 300 RTK (M300 RTK) aircraft is NOT a toyandisnotsuitableforchildrenundertheageof18.Note thatSafetyataGlanceonlyprovidesaquickoverviewofthe safetytips.Makesureyoureadandunderstandtheremaining sections of this document. The aircraft does not achieve IP44 protection rating in the following circumstances:

Folded frame arms. Flight Batteries. You use batteries other than the M300 RTK's TB60 Intelligent 2. Pre-flightChecklist charged. Ensure the remote controller and aircraft batteries are fully The cover for the ports are not attached correctly. Ensure the propellers are in good condition and securely top shell. tightened before each flight. The aircraft is broken due to various reasons, such as broken Ensure there is nothing obstructing the motors. Check that the aircraft shell, failure of the waterproof adhesive, etc. The weatherproofing top shell plug is not firmly attached to the Safety at a Glance 1. Environmental Considerations Always fly at locations that are clear of building and other obstacles. DO NOT fly above or near large crowds. Avoid flying at altitudes above 400 feet (120 m)*. Fly in moderate weather conditions with temperatures between

-20 to 50C (-4 to 122F). Please take additional caution when flying indoors as the aircraft stabilization features may experience some interference. DO NOT fly when the wind speed exceeds 12 m/s or 27 mph. Land the aircraft as soon as possible when the DJI Pilot app prompts you to do so. motors are clean and free of stains. Check that the camera lens is clean and free of stains. Complete the pre-flight checklist displayed in DJI Pilot app. Calibrate the compass and the IMU when the DJI Pilot app or the status indicator prompt you to do so. Ensure the GPS satellite number is not less than 6 in the DJI Pilot app. Altering or modifying the aircrafts parts may impact its stability. Strictly follow DJIs official instruction to attach compatible external equipment and please ensure that the overall weight of the aircraft does not exceed 9 kg after attachment. Be sure that the external equipment is mounted in the right position as provided in the official instruction to avoid the displacement of the aircrafts center of gravity. Ensure the vision system, infrared sensors, FPV cameras and auxiliary lights lens are clean and free of stains or fingerprints, and they are not obstructed by any parts (e.g. load attached). Ensure the frame arms are fully unfolded, the frame arms and the landing gears are locked firmly. Ensure the rubber plug are inserted firmly when the ports on aircraft and remote controller are not used. Make sure that all the cooling fans of the aircraft are free of foreign objects, and there is no obstruction on the air intake and the air vent. Also make sure that the fans work without any abnormal noise. 3. IP44ProtectionRating Under stable laboratory conditions, the M300 RTK achieves an IP44 protection rating by IEC60529 standards when equipped with TB60 Intelligent Flight Batteries. However, this protection rating is not permanent and may reduce over time after long-term use. DO NOT fly when the amount of rainfall exceeds 100 mm / 24 h. DO NOT fold the frame arms in the rain. Make sure the battery ports, battery compartment ports, battery surfaces, and battery compartment surfaces are dry before inserting the batteries. Make sure the battery ports and battery surfaces are free from any liquid before charging the batteries. Before packing the aircraft into the carrying case, ensure that it is free from any liquid by wiping it carefully. Product warranty does not cover water damage.

* The flying altitude restriction varies in different jurisdictions. DO NOT fly above the maximum altitudes set forth in your local laws and regulations. 2 4. Operation DO NOT fly the aircraft from a moving vehicle. To avoid affecting the motor service life, do not take off or land the aircraft on sandy or dusty areas. Stay away from the rotating propellers and motors. Maintain visual line of sight of your aircraft at all times. To stop the motors mid-flight, pull both remote controller sticks to the bottom inner corner or bottom outside corner. Stopping the motors mid-flight will cause the aircraft to crash. The motor can only be stopped mid-flight when the flight controller detects critical error. While the aircraft is equipped with advanced technology, the pilots sound discretion is required during the flight. Safety and flight assistance features such as obstacle avoidance, precise landing, and landing protection, are designed to assist your operation, not to replace it. Environmental conditions including lighting and obstacles texture may impact the performance of the Vision System. DO NOT answer incoming calls, text messages or use any other features of your mobile devices that may distract you from operating your aircraft during flight. DO NOT fly under the influence of alcohol or drugs. DO NOT fly closely above reflective surfaces such as water or snow, as these terrains may affect the performance of the Vision System. In the instance of a Low Battery Warning, land the aircraft immediately at a safe location. During the Failsafe Return to Home procedure, the aircraft will not be able to avoid the obstacles if the light condition is not good. You can quit the Return to Home procedure and operate the aircraft when the remote controller signal is obtained again. Ensure to set an appropriate Failsafe altitude before each flight. After landing, first stop the motor, then turn off the Intelligent Flight Battery, and then turn off the remote controller. While with advanced technology, the DJI Pilot apps sound discretion is required during the flight. Safety and flight assistance features such as obstacle avoidance, precise landing, and landing protection, are designed to assist your operation, not to replace it. Environmental conditions including lighting and obstacles texture may impact the performance of the Vision System. Please set the Return to Home Altitude higher than surrounding obstacles in the DJI Pilot app. Landing protection (detects if the ground is suitable for landing at an altitude of 2 meters above the ground) is used to optimize the operation experience. Always be alert when in control of the aircraft as the vision system may be disabled in certain situations (e.g. dim lighting or unclear obstacle surface patterns), and ground surface detection may fail. 5. MaintenanceandUpkeep DO NOT use aged, chipped or broken propellers. It is recommended to store the aircraft and the batteries in a cool and dry place with temperatures between 22 and 30 C

(71 and 86 F), and avoid exposure to direct sunlight. Refer to the Intelligent Flight Battery Safety Guidelines for more information about safe use of the battery. aviation authorities for a complete lists and regulations of GEO Zones. The flight altitude restriction varies in different jurisdictions. DO NOT fly above the maximum altitudes set forth in your local laws and regulations. Avoid flying in areas where rescue teams are actively using the airspace. 6. ObserveLocalLawsandRegulations DO NOT fly in the GEO Zones. You can find relevant information of these areas at http://flysafe.dji.com/. Please check with local Fly in Open Areas Strong GPS Signal Maintain Line of Sight Fly Below 400 feet

(120 m) Avoid flying over or near crowds, trees or airports. Strong electromagnetic sources such as power lines, base stations, and tall buildings may affect the onboard compass. Always stay alert about surroundings in flight. DO NOT use the aircraft in adverse weather conditions such as rain, snow, fog and wind speeds exceeding 12 m/s or 27 mph. 12m/s GEO Zone 3 Stay away from the rotating propellers and motors. Learn more at:

https://flysafe.dji.com Procedures, which if not properly followed, create a possibility and remote controller are not used. NOTICE All instructions and other collateral documents are subject to change at the sole discretion of SZ DJI TECHNOLOGY CO., LTD (DJI). For up-

to-date product information, visit http://www.dji.com and check on the product page. Glossary The following terms are used throughout this document literature to indicate various levels of potential harm when operating this product:

of physical property damage AND a little or no possibility of injury. Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury. Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of serious injury. Read the ENTIRE user manual to becomefamiliarwiththefeaturesof this product before operation. Failure to operate the product asinstructedbytheusermanualmayresultindamagetothe productorpersonalpropertyandcauseseriousinjury. Thisisasophisticatedproduct.Itmustbeoperatedwithcaution and common sense and requires some basic mechanical ability. Failure to operate this product in a safe and responsible mannercouldresultininjuryordamagetotheproductorother property. This product is not intended for use by children. DO NOT use incompatible components or alter this product in any wayunlessotherwiseallowedbyrelevantdocumentsprovided by SZ DJI TECHNOLOGY CO., LTD. These Safety Guidelines contain instructions for safety, operation and maintenance. It is importanttoreadandfollowalloftheinstructionsandwarnings in the user manual, prior to assembly, setup or use, in order to operatetheproductsafelyandavoiddamageorseriousinjury. AGE RECOMMENDATION: NOT FOR CHILDREN UNDER THE AGE OF 18. THIS IS NOT A TOY. Pre-flightChecklist 1. Ensure that you are using only genuine parts and that all parts are 2. Ensure the remote controller, Intelligent Flight Battery, and mobile in mint condition. device are fully charged. 3. Ensure that there is no foreign object stuck to the camera lens, the microSD card has been inserted into the gimbal camera, and the gimbal can rotate freely before powering it on. 4. Ensure the propellers and mounting screws are securely mounted onto the motors, and the motors can start and function normally. 5. Follow the on-screen instructions to calibrate the compass. 6. Ensure the DJI Pilot app and aircraft's firmware have been upgraded to the latest version. 7. Ensure that your flight area is outside the GEO Zones and flight conditions are suitable for flying the aircraft. 8. Be sure that you are NOT flying under the influence of alcohol, drugs or any substance that may impair your cognitive abilities. 9. Be familiar with the selected flight mode and understand all safety functions and warnings. 10. Be sure to observe all local regulations, obtain appropriate authorizations, and understand the risks. REMEMBER: It is solely your responsibility to comply with all applicable regulations. 11. Please MAINTAIN VISUAL LINE OF SIGHT (WITH YOUR EYES) OF YOUR AIRCRAFT AT ALL TIMES. Please DO NOT only rely on first person view camera to control your aircraft. 12. Ensure the DJI Pilot app is properly launched to assist your operation of the aircraft. Without the flight data recorded by the DJI Pilot app, in certain situations (including the loss of your aircraft) DJI may not be able to provide aftersales support to you or assume liability. 4 13. When flying with a payload, always test the hovering performance of the aircraft. Make sure the total take-off weight does not exceed the normal specification. Take off the aircraft without any strong mechanical vibration of the aircraft, electromagnetic interference, or obstruction of the vision system or infrared sensors. 14. Ensure the vision system, infrared sensors, FPV cameras and auxiliary lights lens are clean and free of stains or fingerprints, and they are not obstructed by any parts (e.g. load attached). 15. Ensure the frame arms are fully unfolded, the frame arms and the landing gears are locked firmly. 16. Ensure the rubber plug are inserted firmly when the ports on aircraft 17. Make sure that all the cooling fans of the aircraft are free of foreign objects, and there is no obstruction on the air intake and the air vent. Also make sure that the fans work without abnormal noise. DisclaimerandWarning This product is NOT a toy and is not suitable for children under the age of 18. Adults should keep the aircraft out of the reach of children and exercise caution when operating this aircraft in the presence of children. While the product adopts advanced technology, inappropriate use of the product could result in personal injury or property damages. Please read the materials associated with the product before your first use of the product. These documents are included in the product package and are also available online on the DJI product page at http://www.dji.com. The information in this document affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow the instructions and warnings in this document may result in product loss, serious injury to you, or damage to your aircraft. By using this product, you hereby signify that you have read this disclaimer carefully and that you understand and agree to abide by the terms and conditions herein. EXCEPT AS EXPRESSLY PROVIDED IN DJI AFTER-SALES SERVICE POLICIES AVAILABLE AT (HTTP://WWW. DJI.COM/SERVICE/POLICY), THE PRODUCT AND ALL MATERIALS, AND CONTENT AVAILABLE THROUGH THE PRODUCT ARE PROVIDED AS IS AND ON AN AS AVAILABLE BASIS, WITHOUT WARRANTY OR CONDITION OF ANY KIND, EITHER EXPRESS OR IMPLIED. DJI DISCLAIMS ALL WARRANTIES OF ANY KIND, EXCEPT AS EXPRESSLY PROVIDED IN DJI AFTER-SALES SERVICE POLICIES, WHETHER EXPRESS OR IMPLIED, RELATING TO THE PRODUCT, PRODUCT ACCESSORIES, AND ALL MATERIALS, INCLUDING:

(A) ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, QUIET ENJOYMENT, OR NONINFRINGEMENT; AND (B) ANY WARRANTY ARISING OUT OF COURSE OF DEALING, USAGE, OR TRADE. DJI DOES NOT WARRANT, EXCEPT AS EXPRESSLY PROVIDED IN DJI LIMITED WARRANTY, THAT THE PRODUCT, PRODUCT ACCESSORIES, OR ANY PORTION OF THE PRODUCT, OR ANY MATERIALS, WILL BE UNINTERRUPTED, SECURE, OR FREE OF ERRORS, VIRUSES, OR OTHER HARMFUL COMPONENTS, AND DO NOT WARRANT THAT ANY OF THOSE ISSUES WILL BE CORRECTED. NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED BY YOU FROM THE PRODUCT, PRODUCT ACCESSORIES, OR ANY MATERIALS WILL CREATE ANY WARRANTY REGARDING DJI OR THE PRODUCT THAT IS NOT EXPRESSLY STATED IN THESE TERMS. YOU ASSUME ALL RISK FOR ANY DAMAGE THAT MAY RESULT FROM YOUR USE OF OR ACCESS TO THE PRODUCT, PRODUCT ACCESSORIES, AND ANY MATERIALS. YOU UNDERSTAND AND AGREE THAT YOU USE THE PRODUCT AT YOUR OWN DISCRETION AND RISK, AND THAT YOU ARE SOLELY RESPONSIBLE FOR ANY PERSONAL INJURY, DEATH, DAMAGE TO YOUR PROPERTY (INCLUDING YOUR COMPUTER SYSTEM OR MOBILE DEVICE OR DJI HARDWARE USED IN CONNECTION WITH THE PRODUCT) OR THIRD PARTY PROPERTY, OR THE LOSS OF DATA THAT RESULTS FROM YOUR USE OF OR INABILITY TO USE THE PRODUCT. SOME JURISDICTIONS MAY PROHIBIT A DISCLAIMER OF WARRANTIES AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in these Safety Guidelines. DataStorageandUsage When you use our mobile app or our products or other software, data regarding the use and operation of the product, such as flight telemetry data (e.g., speed, altitude, battery life, and information about the gimbal and camera) and operations records, may be provided to DJI. The internal storage device incorporated into the product stores various types of data, including flight telemetry data. You may also provide flight telemetry data and other data to us when you manually transmit that information from the internal storage device to us. Please refer to DJI Privacy Policy (available at http://www.dji.com/policy) for more information. BeforeYouBegin This product is an aircraft that offers easy flight when in good working order as set forth below. Visit http://www.dji.com for the most current instructions and warnings and http://knowbeforeyoufly.org/ for more information about flight safety and compliance. The following documents have been produced to help you safely operate and make full use of your aircraft:

In the Box Disclaimer and Safety Guidelines Intelligent Flight Battery Safety Guidelines Quick Start Guide User Manual Check all of the included parts listed in the In the Box document and read the Disclaimer and Safety Guidelines before flight. Then prepare for your first flight by using the Quick Start Guide and watching all of the tutorial videos on DJIs official website (http://www.dji.com). If you have questions, refer to the User Manual in the app or on DJIs official website for more comprehensive information. Make sure you fully understand the functionality of each individual part, the flight condition requirements, the key contingency warning functions/systems, and all government regulations before each flight. If you have any questions or problems during the assembly, maintenance or use of this product, please contact DJI or a DJI authorized dealer. Individual Parts RegardingGenuineandFunctionalParts To avoid component malfunction, serious injury, and property damage, observe the following rules:

1. Use only genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI certified manufacturers may cause system malfunctions and compromise safety. 2. Ensure there are no foreign objects (such as water, oil, soil, sand, etc.) inside of the aircraft or its components. 3. Ensure the aircraft and its components including but not limited to the remote controller, camera, gimbal, compass, propulsion system, and battery are all in good working order, damage free, and functioning well. Refer to the remaining sections in this document for more details on how to ensure the functionality of these components. 4. DO NOT modify or alter the aircraft, its components, and parts. Unauthorized modification may cause malfunctions and affect the aircrafts functionality and safety. 5. Make sure that all the cooling fans of the aircraft are free of foreign objects, and there is no obstruction on the air intake and the air vent. 6. All the accessories that would be used together with M300 RTK, including but not limited to gimbals, CSM Radar, should only be used with the aircraft. Users take full responsibility for the damages caused by the accessories that have been used with other non-

official products. 7. DO NOT use non-DJI cable to connect the aircraft ports, which may cause system malfunctions and compromise safety. Video Transmission System 1. Only enable "Custom" mode under the guidance of professionals. Otherwise, the video transmission signal may lag or even get lost due to interference. Remote Controller 1. Fully charge the Smart Controller before each flight. 2. If the Smart Controller is turned on and the Touch Screen is off for five minutes, an alert sound will be triggered. Ten seconds after the alert sound, the Smart Controller will automatically power off. Move the sticks or perform some other action to cancel the alert. 3. Ensure the antennas are unfolded and adjusted to the proper position to achieve the optimal transmission quality. 4. Contact DJI support to repair or replace the antennas if they are damaged. Damaged antennas will greatly decrease performance. 5. Link the Smart Controller and the aircraft again if you change the aircraft. 6. Ensure to power off the aircraft before the Smart Controller. 7. Fully charge the Smart Controller every three months. 8. Immediately charge the Smart Controller when its power level decreases to 10% to prevent the Smart Controller from damage due to over discharge for an extended period. Discharge the Smart Controller to a power level between 40% and 60% if stored for an extended period. 9. DO NOT cover the air vent on the Smart Controller. Otherwise, the Smart Controller may become too hot, which could affect its performance. 10. DO NOT disassemble the Smart Controller without the assistance of a DJI authorized dealer. Always contact DJI or a DJI authorized dealer to replace the Smart Controllers components. 11. DO NOT block the built-in GPS. In cases where the DJI Smart Controller Enterprise Screen Mounting Bracket (hereinafter referred as Mounting Bracket) is installed, remove it and try again if GPS signal is poor. 12. To avoid wear and tear of the Stick Covers, DO NOT disassemble the sticks on a frequent basis. Compass To avoid possible serious injury and property damage, observe the following rules:

1. Land immediately when obvious drifting occurs in flight. 2. DO NOT fly in an environment with strong electromagnetic interference or space with lots of obstruction. 3. If the DJI Pilot app prompts for compass calibration before takeoff, please take off after calibration in an environment without electromagnetic interference. Only calibrate the compass when the DJI Pilot app or the status indicator prompt you to do so. Observe the following rules when calibrating your compass:

1. DO NOT calibrate your compass where there is magnetic interference, such as interference by magnetite, parking structures, or steel reinforcements underground. 2. DO NOT carry ferromagnetic materials with you during calibration such as cellular phones. 3. The DJI Pilot app will prompt you to resolve the compass issue if the compass is affected by strong interference after calibration is complete. Follow the prompted instructions to resolve the compass issue. Propulsion Systems To avoid serious injury to yourself or others, which may be caused by the rotating propellers and motors, observe the following rules:

Propellers 1. DO NOT use aged, chipped, or broken propellers. 2. Always power off the aircraft before touching the propellers. 3. Be aware of the sharp edges of the propellers when mounting or removing the propellers. Wear gloves or take other protective measures when touching the propellers. 4. Whenever necessary, use tools (e.g., wrench, screwdriver, pliers, 5 etc.) to remove or install the propellers. displayed in the app prior to each flight. 5. Ensure the propellers and mounting screws are securely mounted to prevent them from falling off the motors. 6. DO NOT turn on the motors when propellers are mounted and 7. Use DJI ASSISTANTTM 2 to practice your flight skills if you have never operated the aircraft or if you DO NOT have sufficient experience to be comfortable operating the aircraft. there are other people or animals in the immediate vicinity. 8. Cache the map data of the area where you intend to fly the aircraft 7. Using third-party propellers may compromise the aerodynamics of the aircraft. For a better and safer flight experience, we recommend you to use original DJI propellers only. 8. Wipe the propellers to make them dry before each flight where the surrounding temperature is around 0 (32) to avoid the propellers from having frosted. by connecting to the Internet before each flight. 9. The app is designed to assist your operation. Please use your sound discretion and DO NOT rely on the app to control your aircraft. 10. Your use of the app is subject to the DJI Pilot app Terms of Use and DJI Privacy Policy. Please read them carefully in the app. Motors 1. Ensure the motors are securely mounted and rotating smoothly. Firmware 2. Ensure proper installation and that the motor functions normally before each flight. If the the ventilation holes on the motors are blocked, clear them before flight. If the cover is aging, damaged or deformed, please contact DJI or a DJI authorized dealer. 3. DO NOT attempt to modify the structure of the motors. 4. DO NOT touch or let your hands or body come in contact with the motors after flight as they may be hot. Electronic Speed Controllers 1. If required before each flight, follow the app prompts to fix the abnormalities of the electronic speed controllers. 2. Please land the aircraft if the DJI Pilot app prompts that there is something wrong with the electronic speed controllers (e.g. over temperature, low voltage or overload). To avoid possible serious injury and property damage, observe the following rules:

1. DO NOT block any of the ventilation holes on the motors. 2. DO NOT block any of the ventilation holes on the frame arm of the aircraft. updating. SDK Motors 1. To avoid affecting the motor service life, do not take off or land the aircraft on sandy or dusty areas. 2. Keep the motors free of dust and ensure the motor vents are not blocked. 3. If a motor is stuck and unable to rotate freely, execute the CSC

(Combination Stick Command) to stop the motors immediately. Electronic Speed Controllers Ensure the electronic speed controllers sound a normal tune when powered on. DJI Pilot App 1. Be sure to fully charge your tablet or mobile device (if used) before launching the app. CRYSTALSKY is recommended for a better experience. 2. If you are using a phone as your mobile display device, be sure to continue flying safely when the phone receives an incoming call. DO NOT accept phone calls during flight. 3. Mobile cellular data is required when using the DJI Pilot app. Please contact your wireless carrier for data charges. 4. Read all prompted safety tips, warning messages, and disclaimers carefully. Be familiar with the related regulations in your area. You are solely responsible for being aware of all relevant regulations and flying in a way that is compliant. your Home Point. b. Read and understand the warning messages and disclaimer before setting the altitude beyond the regulatory limit. c. Read and understand the warning messages and disclaimer before switching between the flights modes. To avoid serious injury to children and animals, observe the following rule:

1. Keep children and animals at a safe distance during any firmware upgrade, system calibration, and parameter setting procedures. 1. For safety, always update the firmware to the latest version when an upgrade notification is shown in the DJI Pilot app. 2. Firmware upgrade notifications will inform about new firmware upgrades. You are required to read and understand the information shown. 3. Be sure to update the remote controllers firmware to the latest version after you update the aircrafts firmware. 4. The remote controller may become unlinked from the aircraft after 5. Be sure to check all connections and remove the propellers from the motors before performing the firmware update. 1. Before using the DJI SDK, you should agree to the DJI SDK Terms of Use and the DJI Privacy Policy. These Terms of Use and Privacy Policy limit some of DJI's legal responsibilities, please read them carefully at https://developer.dji.com/policies/. Camera (Optional) To avoid possible serious injury and property damage, observe the following rule:

1. DO NOT block any ventilation holes on the camera as the heat generated may hurt you and damage the device. 1. Before use, check camera settings to make sure they are adjusted to fit your needs. 2. Test the camera by shooting a few test images and check that it is operating correctly before shooting important pictures or videos. 3. DO NOT remove the microSD card from the gimbal camera when it is powered on. Please use officially recommended microSD cards. 4. Be sure to power off the Intelligent Flight Battery correctly, otherwise your camera parameters will NOT be saved and any recorded videos may be damaged. 5. Regardless of the reason, DJI will not be responsible for any failure of an image or video to be recorded or having been recorded in a way that is not machine readable. a. Read and understand the warning messages before resetting Gimbal (Optional) 5. Land your aircraft immediately at a safe location if there is an alert powered on. shown on the app. 6. Examine and check all warning messages on the checklist 6 1. Precision elements in the gimbal may be damaged in a collision or impact, which may cause the gimbal to function abnormally. 2. DO NOT apply external force to the gimbal after the gimbal is 3. DO NOT add any payloads to the gimbal, as this may cause the gimbal to function abnormally or even lead to motor damage. 4. The gimbal and gimbal connector are very delicate. Handle with care and DO NOT touch the gimbal connector, as any damage will cause it to function abnormally. 5. Hold the gimbal firmly when detaching or reattaching it, so it does not drop. 6. DO NOT attach or remove the gimbal with the aircraft powering on. 7. When using multiple-gimbal system, ensure to strictly follow the instructions on the user manual, mounting compatible gimbal cameras correctly. Product Care Storage and Transportation 3. Be EXTRA cautious when operating the aircraft indoors. Some features of the aircraft, especially the stabilization feature, may be impacted. 4. Be sure to enable the Vision System when flying indoors. Note that the Vision System may NOT work properly when it is flying over water, over surfaces without a clear pattern, or in a dim environment. 1. Aircraft and battery performance is subject to environmental factors such as air density and temperature. a. DO NOT operate the aircraft when the temperature is outside the range of -20 to 50 C (-4 to 122 F). 2. DO NOT use the aircraft near accidents, fire, explosions, floods, tsunamis, avalanches, landslides, earthquakes, dust, or sandstorms. To avoid serious injury to children and animals, observe the following rule:

1. Small parts, such as cables and straps, are dangerous if Interference with Communications swallowed. Keep all parts out of reach of children and animals. 1. Fully charge and discharge the battery regularly to maintain battery health. Refer to the Intelligent Flight Battery Safety Guidelines for more information about safe use of the battery. 2. DO NOT allow the camera to come into contact with, or become immersed in, water or other liquids. If it gets wet, wipe dry with a soft, absorbent cloth. Turning on an aircraft that has fallen into water may cause permanent component damage. DO NOT use substances containing alcohol, benzene, thinners or other flammable substances to clean or maintain the camera. DO NOT store the camera in humid or dusty areas. 3. Detach the gimbal from the aircraft when storing for a long period of time or transporting over long distances. 4. DO NOT connect this product to any USB interface that is older than version 2.0. DO NOT connect this product to any "power USB"

or similar devices. 5. Frame arms and propellers must be folded to the original place during transportation, or the antennas may be damaged. Place the aircraft on the ground gently to avoid damage to the IMU and other parts. Maintenance and Upkeep 1. Please contact DJI recommended service centers for product inspection or repair after any crash or violent impact. Operating damaged aircraft is very dangerous and may cause bodily injury or property damage. 2. Fully charge and discharge the battery regularly to maintain battery health. Refer to the Intelligent Flight Battery Safety Guidelines for more information about safe use of the battery. 3. It is recommended to schedule a maintenance service regularly for flight safety and reliability. Refer to the Intelligent Flight Battery Safety Guidelines for details. 4. Regularly check the Battery Level Indicators to see the current battery level and overall battery life. The battery is rated for 200 cycles. It is not recommended to continue use afterward. Refer to the Intelligent Flight Battery Safety Guidelines for more information about the safe use and maintenance of the battery. FlightConditionRequirements Weather Conditions and Surrounding Environment The aircraft is designed to operate in good to moderate weather conditions. To avoid collision, serious injury and property damage, observe the following rules:

1. DO NOT use the aircraft in severe weather conditions. These include heavy wind speeds exceeding 12 m/s, snow, heavy rain, smog, hail, lightning, tornadoes or hurricanes. 2. Keep the aircraft at least 30 feet (10 meters) away from obstacles, people, animals, buildings, public infrastructure, trees, and bodies of water when in flight. Stay even further away from the above objects as your altitude increases. 1. Check if any part of the aircraft has been hit or crashed. Contact DJI support or the authorized dealers when needed. 2. Fly in open areas. Tall buildings or steel structures may affect the accuracy of the on-board compass and block the GPS signal. 3. Avoid interference between the remote controller and other wireless equipment. Make sure to turn off the Wi-Fi on your mobile device. 4. Be extremely alert when fly near areas with magnetic or radio interference. These include but are NOT limited to: high voltage lines, large scale power transmission stations or mobile base stations and broadcasting towers. Failing to do so may compromise the transmission quality of this product or cause remote controller and video transmission errors which may affect flight orientation and location accuracy. The aircraft may behave abnormally or go out of control in areas with too much interference. Operating the Aircraft Responsibly To avoid serious injury and property damage, observe the following rules:

1. Make sure you are NOT drunk, or under the influence of drugs, anesthesia, or suffering from dizziness, fatigue, nausea or any other conditions, whether physical or mental, that could impair your ability to operate the aircraft safely. 2. Upon landing, power off the aircraft first, then switch off the remote controller. 3. DO NOT drop, launch, fire or otherwise project any dangerous payloads on or at any buildings, persons or animals, or which could cause personal injury or property damage. 4. DO NOT use the aircraft that has been crashed or accidently hit, or the aircraft that is not in good condition. 1. Make sure you have been sufficiently trained and are fully aware of any contingency plans before accidents happen. 2. Make sure you have a flight plan and never fly the aircraft recklessly. 3. Respect the privacy of others when using the camera. Make sure you comply with local privacy laws, regulations, and moral standards. 4. DO NOT use this product for any reason other than general personal use. DO NOT use it for any illegal or inappropriate purpose

(such as spying, military operations, or unauthorized investigations). 5. DO NOT use this product to defame, abuse, harass, stalk, threaten or otherwise violate the legal rights (such as the right of privacy and publicity) of others. 6. DO NOT trespass into private property of others. FlightModes,FunctionsandWarnings Flight Modes DO NOT switch from P-mode to either S-mode or T-mode unless you are sufficiently familiar with the aircrafts behavior under each flight mode. You must turn on the Multiple Flight Modes setting in the app before 7 you can switch from P-mode to other modes. for landing. The aircraft will automatically enter Attitude mode when both of the following conditions are met: (1) the vision system is unavailable and (2) either there is weak GPS signal or the compass experiences interference. In Attitude mode, the Vision System and some advanced features are disabled. Therefore, the aircraft cannot position or auto-brake in this mode and is easily affected by its surroundings, which may result in horizontal shifting. Use the remote controller to position the aircraft. Maneuvering the aircraft in Attitude mode can be difficult. Before switching the aircraft into Attitude mode, make sure you are comfortable flying in this mode. DO NOT fly the aircraft too far away as you might lose control and cause a potential hazard. Avoid flying in areas where GPS signal is weak, or in narrow and confined spaces. The aircraft will otherwise be forced to enter Attitude mode, leading to potential flight hazards, please land it in a safe place as soon as possible. P-mode is preferred for most flight scenarios. When flying in other modes, take EXTRA precautions because some features will NOT be available. When flying in Attitude mode, take EXTRA precautions because some features are NOT available in Attitude mode. When flying indoors, the aircraft cannot perform precision hovering when flying above the surfaces that do not have a clear pattern. Refer to the Vision System and Infrared Sensing System section for complete indoor flying criteria. 1. P-mode (Positioning): P-mode works best when the GPS signal is strong. The aircraft utilizes the GPS and Vision System to automatically stabilize itself. 2. S-mode (Sports): S-mode is identical to P-mode in terms of flight controller settings, except that the handling gain values of the aircraft are adjusted in order to enhance the maneuverability of the aircraft. The maximum flight speed of the aircraft is increased in this mode. 3. T-mode (Tripod): T-mode is based on P-mode but with a limited flight speed, which makes the aircraft movement more easily controlled. Return to Home 2. When battery warnings are triggered, promptly bring the aircraft back to the Home Point or land to avoid losing power during flight and causing damage to the aircraft, property, animals, and people. D-RTK 2 1. Only use genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI-certificated manufacturers may cause the system to malfunction and compromise safety. 2. Operate in an open environment free from radio interference. 3. DO NOT obstruct any D-RTK 2 antennas. Vision System and Infrared Sensing System 1. The Vision System will work properly at a height reaching up to 30 meters over surfaces that have clear pattern variations. The vision system cannot work when the aircraft is flying fast at altitudes below 0.5 meters. 2. The Vision System may NOT function properly when the aircraft is flying over water. DO NOT rely too much on the vision system, and operate the aircraft cautiously. 3. The Vision System may NOT function properly when in any of the following situations:

a. Flying over monochrome surfaces (e.g., pure black, pure white, pure red, pure green) or without clear texture. b. Flying over highly reflective surfaces. c. Flying over water or transparent surfaces. d. Flying over moving surfaces or objects (e.g. above moving people, waving reeds, shrubs and grass). f. Flying in an area where the lighting changes frequently or g. Flying over extremely dark (< 15 lux) or bright (> 10,000 lux) h. Flying at high speeds (over 14m/s at 2 meters or over 5m/s at 1 drastically. surfaces. meter). i. Tiny obstacles. 4. The Infrared Sensing System may NOT provide an accurate distance when in any of the following situations:

1. The Return to Home function may be affected by the weather, the a. Flying over surfaces that can absorb sound waves (e.g., pure environment, or any nearby magnetic fields. black matt objects). 2. Make sure to operate the aircraft within the transmission range of b. There is a large area of strong reflectors beyond 15m (for the remote controller. example, multiple traffic signs are placed side by side). 3. Press the RTH (Return to Home) Button on the remote controller to initiate the Return to Home process instead of turning off the remote controller. And the aircraft will fly to the latest recorded home point. 4. During flight, if the aircraft is flying over extremely dark (< 15 lux) or bright (> 10,000 lux) surfaces, it will not be able to avoid obstacles. DO NOT rely on the vision system and always be alert when in control of the aircraft. Control the aircraft by yourself if necessary or press the RTH Button to stop the aircraft from returning to home. 5. Tall buildings may adversely affect the Failsafe function. Therefore, it is important to set an appropriate Failsafe altitude before each flight. Please adjust the aircraft altitude while returning home. 6. The Return to Home feature will NOT work if the GPS signal is insufficient (GPS signal less than three bars) or if GPS is not active. 7. In the event of loss of the remote controllers signal and the GPS signal is weak, if the aircraft cannot detect the Home Point, the aircraft will hover for 8 seconds and then auto-land if it is in P mode. 8. If the battery life so allows, the aircraft may first return to the last position where it had connection with the remote controller during the Failsafe RTH. As a result, you may observe the aircraft first flying away from you, then returning to the home point. Low Battery 8 1. When the Critical Battery Level Warning activates and the aircraft is descending automatically, you may push the throttle up to maintain the aircraft's altitude and navigate it to a more appropriate location c. Tiny obstacles d. Mirror or transparent objects (such as mirrors, water, and glass). 5. Vision System calibration is required if the aircraft suffers from crashing. Calibrate the Vision System if the DJI Pilot app prompts you to do so. 6. Avoid flying in rainy and foggy weather or other surroundings with low visibility (visibility below 100 m). 7. Keep the sensors of the Vision System and Infrared Sensing System clean at all times. a. Remove the surface film, stickers and other obstructions. b. If there are water drops, fingerprints, dirt, etc., please wipe them clean first (please use a clean cloth, not organic solvents such as alcohol). c. If the surface glass is dropped, broken, scratched, worn, etc., please contact DJI after-sales or local dealer. 8. DO NOT hang or place anything in an area that will block the Vision System, Infrared Sensing System and their observation range. 9. Do not interfere with the Vision System and Infrared Sensing System in any way (for example, using a strong light source to illuminate the Vision System or using specular reflectors towards the infrared sensor), and ensure that the sensor lens is clear and free of stains. 10. The Vision System and Infrared Sensing System are not able to brake and stop the aircraft at a safe distance from an obstacle if the aircraft attitude angle is larger than 25 degrees or the speed exceeds 17 m/s. 11. Please be mindful of blind spots (grey) of the Vision System and Infrared Sensing System. Infrared sensor observation range is 8 m. 30 m 60 60 40 m 60 60 4 0 m 50 50 30 m 50 40 m 4 0 m 50 3 0 m 75 65 30 m 40 m 65 65 65 65 40 m 40 m 40 m 75 75 75 75 CompliancewithRegulations&GEOZones Regulations To avoid non-compliant behavior, serious injury, and property damage, observe the following rules:

1. DO NOT operate in the vicinity of manned aircraft, regardless of altitude. Land immediately if necessary. 2. DO NOT fly the aircraft in areas where large events are being held, including but not limited to sporting events and concerts. 3. DO NOT fly the aircraft in areas prohibited by local laws. 4. DO NOT fly the aircraft above the authorized altitude. Remain well clear of and DO NOT interfere with manned aircraft operations. Be aware of and avoid other aircraft and obstacles at all times. To avoid, serious injury and property damage, observe the following rules:

1. DO NOT fly the aircraft near or inside GEO Zones specified by local laws and regulations. The GEO Zone list includes: airports, borders between two sovereign countries or regions, major cities / regions, etc., and is continuously updated. 2. DO NOT fly the aircraft above the authorized altitude. 3. ALWAYS keep your aircraft within visual line of sight (VLOS), and use an observer to assist if needed. 4. NEVER use the aircraft to carry illegal or dangerous goods/payloads. 1. Make sure you understand the nature/type of your flight operation

(such as for recreation, for public use, or for commercial use) and have obtained corresponding approval and clearance from the related government agencies before flight. Consult with your local regulators for comprehensive definitions and specific requirements. For users operating their aircraft in the United States, please first visit http://www.knowbeforeyoufly.org/ and take action appropriate to your circumstances. 2. Please note that remote-controlled aircraft may be banned from conducting commercial activities in certain countries and regions. Check and follow all applicable laws and ordinances before flying as those rules may differ from those stated here. 3. DO NOT fly around sensitive infrastructure or property such as power stations, water treatment facilities, correctional facilities, heavily traveled roadways, government facilities, military zones, etc. 4. Respect the privacy of others when using the camera. DO NOT conduct surveillance operations such as image capture or video recording on any person, entity, event, performance, exhibition, and property without authorization or where there is an expectation of privacy, even if the image or video is captured for personal use. 5. Please be advised that in certain areas, the recording of images and videos from events, performances, exhibitions, or commercial properties by means of a camera may contravene copyright or other legal rights, even if the image or video was shot for personal use. Flight Restrictions DJI takes flight safety seriously, and has therefore developed various aids to help users fly more safely. These aids do not guarantee that you are compliance with all applicable laws, regulations, and temporary flight restrictions. You are solely responsible for your behavior when flying a DJI aircraft. It is recommended to update the firmware to the latest version to ensure the following features are fully updated:

GEO Zones 1. All GEO Zones are listed on the DJI official website at http://www.dji. com/flysafe. GEO Zones are divided into different categories and include but are not limited to locations such as airports, flying fields where manned aircraft operate at low altitudes, borders between countries, sensitive locations such as power plants, and areas where major events are being held. 2. Flight restrictions vary by zone. Depending on the restrictions in a particular zone, warnings may appear in the DJI Pilot app, takeoff may be forbidden, the flight altitude may be limited, or the aircraft may take action automatically such as landing automatically. 3. Functions related to flying actions will be affected to some extent when the aircraft is near or inside a GEO Zone. These effects include but are not limited to: the aircraft may slow down, it may not be possible to create a flight task, and a flight task in progress may be interrupted. 4. Operating with the GEO Zones restrictions does not guarantee your compliance with all applicable laws, regulations, and temporary flight restrictions. Consult with your lawyer or local authorities to ensure your compliance. Altitude Limit 1. Fly NO higher than 120 meters (400 feet) above ground level and stay away from any surrounding obstacles. Legal maximum flight altitude may be lower according to your local laws and regulations. Please strictly follow all applicable laws. 2. If you intend to fly above the default altitude limit, you are required to accept the prompted disclaimer to enable the new altitude limit. 9 Compliance Information FCC Compliance Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Thisequipmentshouldbeinstalledandoperatedwithminimumdistance20cmbetween theradiator&yourbody. ISED Compliance Notice This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :(1)Lappareil ne doit pas produire de brouillage; (2)Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Thisequipmentshouldbeinstalledandoperatedwithminimumdistance20cmbetween theradiator&yourbody. Cet quipement est conforme aux limites dexposition aux rayonnements ISED tablies pour un environnement non contrl. Lutilisateur final doit suivre les instructions spcifiques pour satisfaire les normes. Cet metteur ne doit pas tre co-implant ou fonctionner en conjonction avec toute autre antenne ou transmetteur. Cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps.

(Pb)

(Hg)

(Cd)

(Cr+6)

(PBB)

(PBDE) SJ/T 11364 GB/T 26572 GB/T 26572 ROHS KCC Compliance Notice

. NCC Compliance Notice Matrice 300 RTKM300 DJI Smart Controller EnterpriseRM500-ENT nit Lead

(Pb) Mercury Cadmium Hexavalent

(Hg)

(Cd) chromium(Cr+6) Polybrominated biphenyls

(PBB) Polybrominated diphenyl ethers

(PBDE) 1. 0.1 wt % 0.01 wt %

2. 3. EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available online at www.dji.com/

euro-compliance EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Declaracin de cumplimiento UE: SZ DJI TECHNOLOGY CO., LTD. por la presente declara que este dispositivo cumple los requisitos bsicos y el resto de provisiones relevantes de la Directiva 2014/53/EU. Hay disponible online una copia de la Declaracin de conformidad UE en www.dji.com/euro-compliance Direccin de contacto de la UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany EU-verklaring van overeenstemming: SZ DJI TECHNOLOGY CO., LTD. verklaart hierbij dat dit apparaat voldoet aan de essentile vereisten en andere relevante bepalingen van Richtlijn 2014/53/EU. De EU-verklaring van overeenstemming is online beschikbaar op www.dji. com/euro-compliance Contactadres EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Declarao de conformidade da UE: A SZ DJI TECHNOLOGY CO., LTD. declara, atravs deste documento, que este dispositivo est em conformidade com os requisitos essenciais e outras disposies relevantes da Diretiva 2014/53/EU. Existe uma cpia da Declarao de conformidade da UE disponvel online em www.dji.com/euro-compliance Endereo de contacto na UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Dichiarazione di conformit UE: SZ DJI TECHNOLOGY CO., LTD. dichiara che il presente dispositivo conforme ai requisiti essenziali e alle altre disposizioni rilevanti della direttiva 2014/53/EU. Una copia della dichiarazione di conformit UE disponibile online all'indirizzo Web www.dji.com/euro-compliance Indirizzo di contatto UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Dclaration de conformit UE: Par la prsente, SZ DJI TECHNOLOGY CO., LTD dclare que cet appareil est conforme aux principales exigences et autres clauses pertinentes de la directive europenne 2014/53/EU. Une copie de la dclaration de conformit UE est disponible sur le site www. dji.com/euro-compliance Adresse de contact pour l'UE : DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany EU-Compliance: Hiermit erklrt SZ DJI TECHNOLOGY CO., LTD., dass dieses Gert den wesentlichen Anforderungen und anderen einschlgigen Bestimmungen der EU-Richtlinie 2014/53/EU entspricht. Eine Kopie der EU-Konformittserklrung finden Sie online auf www.dji.com/

euro-compliance. Kontaktadresse innerhalb der EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

: SZ DJI Technology Co., Ltd.

, 2014/53/. 105 www.dji.com/euro-compliance Kopija EU Izjave o sukladnosti dostupna je na mrenoj stranici www.dji.com/

euro-compliance

: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Adresa EU kontakta: DJI GmbH, Industriestrasse 12 97618, Niederlauer, Njemaka Prohlen o shod pro EU: Spolenost SZ DJI Technology Co., Ltd. tmto prohlauje, e tohle zazen vyhovuje zkladnm poadavkm a dalm pslunm ustanovenm smrnice 2014/53/EU. Kopie prohlen o shod pro EU je k dispozici on-line na webu www.dji.com/

euro-compliance Vyhlsenie o zhode E: SZ DJI Technology Co., Ltd. tmto vyhlasuje, e toto zariadenie je v zhode so zkladnmi poiadavkami a almi relevantnmi ustanoveniami smernice 2014/53/E. Kpia tohto Vyhlsenia o zhode E je k dispozcii online na www.dji.com/euro-

compliance Kontaktn adresa v EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nmecko Kontaktn adresa v E: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemecko EU-overensstemmelseserklring: SZ DJI Technology Co., Ltd. erklrer hermed, at denne enhed er i overensstemmelse med de vsentlige krav og andre relevante bestemmelser i direktiv 2014/53/EU. Der er en kopi af EU-overensstemmelseserklringen tilgngelig online p www.dji.com/euro-compliance Deklaracja zgodnoci UE: Firma SZ DJI Technology Co., Ltd. niniejszym owiadcza, e przedmiotowe urzdzenie jest zgodne z zasadniczymi wymogami i innymi stosownymi postanowieniami dyrektywy 2014/53/UE. Kopi deklaracji zgodnoci UE mona znale w Internecie na stronie www. dji.com/euro-compliance EU-kontaktadresse: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland Adres do kontaktu w UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Niemcy

: SZ DJI Technology Co., Ltd. 2014/53/E. www.dji.com/euro-compliance EU megfelelsgi nyilatkozat: A DJI Technology Co., Ltd. ezton megersti, hogy ez az eszkz megfelel a 2014/53/EU Irnyelv alapvet kvetelmnyeinek s ms vonatkoz rendelkezseinek. Az EU megfelelsgi nyilatkozat msolata elrhet a www.dji.com/euro-

compliance oldalon

: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, EU kapcsolati cm: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nmetorszg ELi vastavuskinnitus Kesolevaga teatab SZ DJI Technology Co., Ltd., et see seade on koosklas direktiivi 2014/53/EL oluliste nuete ja muude asjakohaste stetega. ELi vastavusdeklaratsiooni koopia on kttesaadav veebis aadressil www.dji. com/euro-compliance Kontaktaadress ELis: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Saksamaa Praneimas dl atitikties ES reikalavimams Bendrov SZ DJI Technology Co., Ltd. tvirtina, kad is prietaisas atitinka pagrindinius 2014/53/ES direktyvos reikalavimus ir kitas susijusias nuostatas. ES atitikties deklaracijos kopij galite rasti adresu www.dji.com/euro-

compliance ES kontaktinis adresas: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany (Vokietija) ES atbilstbas paziojums: SZ DJI Technology Co., Ltd ar o apliecina, ka ierce atbilst direktvas 2014/53/ES pamatprasbm un prjiem btiskiem nosacjumiem. ES atbilstbas deklarcijas kopija pieejama tiesaist vietn www.dji.com/euro-

compliance ES kontaktadrese: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Vcija EU:n vaatimustenmukaisuusvakuutus: SZ DJI Technology Co., Ltd. ilmoittaa tten, ett tm laite on direktiivin 2014/53/EU olennaisten vaatimusten ja sen muiden asiaankuuluvien ehtojen mukainen. Kopio EU:n vaatimustenmukaisuusvakuutuksesta on saatavana verkossa osoitteessa www.dji.com/euro-compliance Yhteystiedot EU:ssa: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany RITEAS Comhlonta an AE: Dearbhaonn SZ DJI Technology Co., Ltd. leis seo go bhfuil an glas seo de rir na gceanglas riachtanach agus na bhforlacha bhartha eile sa Treoir 2014/53/AE. T coip de Dhearbh Comhrireachta an AE ar fil ar lne ag www.dji.com/

euro-compliance Seoladh teagmhla san AE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Dikjarazzjoni ta Konformit tal-UE: SZ DJI Technology Co., Ltd. hawnhekk tiddikjara li dan l-apparat huwa konformi mar-rekwiiti essenzjali u ma dispoizzjonijiet relevanti ora tad-Direttiva 2014/53/UE. Kopja tad-Dikjarazzjoni ta Konformit tal-UE hija disponibbli onlajn fis-sit www. dji.com/euro-compliance Indirizz ta kuntatt tal-UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, il-ermanja Declaraia UE de conformitate: Prin prezenta, SZ DJI Technology Co., Ltd. declar faptul c acest dispozitiv este conform cu cerinele eseniale i celelalte prevederi relevante ale Directivei 2014/53/UE. Un exemplar al Declaraiei UE de conformitate este disponibil online, la adresa www.dji.com/euro-compliance Adresa de contact pentru UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germania Izjava EU o skladnosti: Druba SZ DJI Technology Co., Ltd. izjavlja, da ta naprava ustreza osnovnim zahtevam in drugim ustreznim dolobam Direktive 2014/53/EU. Kopija izjave EU o skladnosti je na voljo na spletu nawww.dji.com/euro-

compliance Kontaktni naslov EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemija EU-frskran om efterlevnad: SZ DJI Technology Co., Ltd. hrmed frklarar att denna enhet uppfyller de vsentliga kraven och andra relevanta bestmmelser i direktivet 2014/53/EU. En kopia av EU-frskran om efterlevnad finns att tillg online p adressen www.dji.com/euro-compliance Kontaktadress EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland Yfirlsing um fylgni vi reglur ESB: SZ DJI Technology Co., Ltd. lsir hr me yfir a etta tki hlti mikilvgum krfum og rum vieigandi kvum tilskipunar 2014/53/ESB. Nlgast m eintak af ESB-samrmisyfirlsingunni netinu www.dji.com/

euro-compliance Heimilisfang ESB-tengiliar: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany AB Uygunluk Beyan: SZ DJI Technology Co., Ltd. bu belge ile bu cihazn temel gerekliliklere ve 2014/53/EU sayl Direktifin dier ilgili hkmlerine uygun olduunu beyan eder. AB Uygunluk Beyannn bir kopyasna www.dji.com/euro-compliance adresinden evrim ii olarak ulalabilir AB iin iletiim adresi: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Almanya Environmentally friendly disposal Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances. Umweltfreundliche Entsorgung Elektro-Altgerte drfen nicht mit gewhnlichem Abfall entsorgt werden und mssen separat entsorgt werden. Die Entsorgung an kommunalen Sammelstellen ist fr Privatpersonen kostenlos. Die Eigentmer der Altgerte sind fr den Transport zu den Sammelstellen verantwortlich. Durch diesen geringen Aufwand knnen Sie zur Wiederverwertung von wertvollen Rohmaterialien beitragen und dafr sorgen, dass umweltschdliche und giftige Substanzen ordnungsgem unschdlich gemacht werden. Tratamiento de residuos responsable con el medio ambiente Los aparatos elctricos viejos no pueden desecharse junto con los residuos orgnicos, sino que deben ser desechados por separado. Existen puntos limpios donde los ciudadanos pueden dejar estos aparatos gratis. El propietario de los aparatos viejos es responsable de llevarlos a estos puntos limpios o similares puntos de recogida. Con este pequeo esfuerzo ests contribuyendo a reciclar valiosas materias primas y al tratamiento de residuos txicos. Mise au rebut cologique Les appareils lectriques usags ne doivent pas tre limins avec les dchets rsiduels. Ils doivent tre limins sparment. La mise au rebut au point de collecte municipal par l'intermdiaire de particuliers est gratuite. Il incombe au propritaire des appareils usags de les apporter ces points de collecte ou des points de collecte similaires. Avec ce petit effort personnel, vous contribuez au recyclage de matires premires prcieuses et au traitement des substances toxiques. EU Izjava o sukladnosti: Tvrtka SZ DJI Technology Co. Ltd. izjavljuje da je ovaj ureaj izraen u skladu s osnovnim zahtjevima i ostalim relevantnim odredbama Direktive 2014/53/EU. Smaltimento ecologico I vecchi dispositivi elettrici non devono essere smaltiti insieme ai rifiuti residui, 106 ma devono essere smaltiti separatamente. Lo smaltimento da parte di soggetti privati presso i punti di raccolta pubblici gratis. responsabilit del proprietario dei vecchi dispositivi portarli presso tali punti di raccolta o punti di raccolta analoghi. Grazie a questo piccolo impegno personale contribuirete al riciclo di materie prime preziose e al corretto trattamento di sostanze tossiche. Milieuvriendelijk afvoeren Oude elektrische apparaten mogen niet worden weggegooid samen met het restafval, maar moeten afzonderlijk worden afgevoerd. Afvoeren via het gemeentelijke inzamelpunt is gratis voor particulieren. De eigenaar van oude toestellen is verantwoordelijk voor het inleveren van de apparaten op deze of vergelijkbare inzamelpunten. Met deze kleine persoonlijke inspanning lever je een bijdrage aan de recycling van waardevolle grondstoffen en de verwerking van giftige stoffen. Eliminao ecolgica Os aparelhos eltricos antigos no podem ser eliminados juntamente com os materiais residuais. Tm de ser eliminados separadamente. A eliminao no ponto de recolha pblico atravs de entidades particulares gratuita. da responsabilidade do proprietrio de aparelhos antigos lev-los a estes pontos de recolha ou a pontos de recolha semelhantes. Com este pequeno esforo pessoal, contribui para a reciclagem de matrias-primas teis e para o tratamento de substncias txicas.

, . Ekologicky etrn likvidace Star elektrick zazen nesmj bt likvidovna spolu se zbytkovm odpadem, ale mus bt likvidovna samostatn. Likvidace na komunlnch sbrnch mstech prostednictvm soukromch osob je bezplatn. Vlastnk starch zazen odpovd za to, e je donese do tchto sbrnch mst nebo na obdobn sbrn msta. Tmto mete pispt k recyklaci hodnotnch surovin a zpracovn toxickch ltek. Miljvenlig bortskaffelse Gamle elektriske apparater m ikke bortskaffes sammen med restaffald, men skal bortskaffes separat. Bortskaffelse p et flles indsamlingssted er gratis for privatpersoner. Ejere af gamle apparater er ansvarlige for at bringe apparater hen til disse indsamlingssteder eller til lignende indsamlingssteder. Med denne lille personlige indsats bidrager du til genanvendelse af vrdifulde rvarer og behandlingen af giftige stoffer.

. Keskkonnasstlik kasutuselt krvaldamine Vanu elektriseadmeid ei tohi ra visata koos olmejtmetega, vaid tuleb koguda ja kasutuselt krvaldada eraldi. Kohaliku omavalitsuse elektroonikaromude kogumispunktis on raandmine eraisikutele tasuta. Vanade seadmete sellistesse vi sarnastesse kogumispunktidesse toimetamise eest vastutavad seadmete omanikud. Selle vikese isikliku panusega aitate kaasa vrtusliku toorme ringlussevtule ja mrgiste ainete ttlemisele. Utilizavimas nekenkiant aplinkai Sen elektrini prietais negalima imesti kartu su buitinmis atliekomis; juos btina utilizuoti atskirai. Toki prietais utilizavimas per komunalinius atliek surinkimo punktus yra nemokamas. Elektrini prietais savininkai utilizuojamus prietaisus privalo priduoti atitinkamus arba analogikus atliek surinkimo punktus. Tokiu bdu, ddami nedaug pastang, prisidsite prie verting mediag perdirbimo ir aplinkos apsaugojimo nuo toksini mediag. Videi draudzga atkritumu likvidana Vecas elektrisks ierces nedrkst likvidt kop ar prjiem atkritumiem, bet ts jlikvid atsevii. Privtpersonm atkritumu likvidana komunlaj savkanas punkt ir bez maksas. Veco ieru panieks ir atbildgs par ieru nogdanu ajos savkanas punktos vai ldzgos savkanas punktos. Ar m nelielm personiskajm plm js veicint vrtgu izejmaterilu prstrdi un toksisko vielu apstrdi. Hvittminen ympristystvllisesti Vanhoja shklaitteita ei saa hvitt kaatopaikkajtteen mukana, vaan ne on hvitettv erikseen. Kunnalliseen keryspisteeseen vieminen on yksityishenkillle ilmaista. Vanhojen laitteiden omistaja vastaa laitteiden toimittamisesta kyseisiin keryspisteisiin tai vastaaviin. Tll vhisell henkilkohtaisella vaivalla edistt omalta osaltasi arvokkaiden raaka-aineiden kierrtyst ja myrkyllisten aineiden ksittely. Discairt neamhdhobhlach don chomhshaol Nor cheart seanghlasanna leictreacha a dhiscairt leis an dramhal iarmharach, ach caithfear iad a chur de limh astu fin. T an discairt ag an ionad bailichin pobail ag daoine probhideacha saor in aisce. T freagracht ar inir seanghlasanna na glasanna a thabhairt chuig na hionaid bhailichin sin n chuig ionaid bhailichin den chinel canna. Le hiarracht bheag phearsanta mar sin, cuidonn t le hamhbhair luachmhara a athchrsil agus le substaint tocsaineacha a chireil Rimi li jirrispetta l-ambjent L-apparat elettriku qadim ma gandux jintrema flimkien ma skart residwu, ida gandu jintrema bmod separat. Ir-rimi fil-post tal-bir komunali minn persuni privati huwa bxejn. Is-sit ta apparat qadim huwa responsabbli biex iib l-apparat fdawn il-postijiet tal-bir jew fpostijiet tal-bir simili. Bdan l-isforz personali gir, inti tikkontribwixxi gar-riikla ta materja prima prezzjua u gat-trattament ta sustanzi tossii. Eliminarea ecologic Aparatele electrice vechi nu trebuie aruncate odat cu deeurile reziduale, ci trebuie eliminate separat. Eliminarea n cadrul punctului de colectare local de ctre persoane fizice este gratuit. Proprietarii de aparate vechi sunt responsabili pentru transportul acestora la respectivele puncte de colectare sau la alte puncte de colectare similare. Prin acest efort personal nesemnificativ, putei contribui la reciclarea materiilor prime valoroase i la tratarea substanelor toxice. Okolju prijazno odlaganje Starih elektrinih aparatov ne smete odvrei skupaj z ostanki odpadkov, temve loeno. Odlaganje na komunalnem zbirnem mestu je za fizine osebe brezplano. Lastnik starih naprav je odgovoren, da jih pripelje do teh ali podobnih zbirnih mest. S tako malo osebnega truda prispevate k recikliranju dragocenih surovin in obdelavi strupenih snovi. Ekoloko odlaganje Stari elektrini ureaji ne smiju se odlagati zajedno s kunim otpadom, ve ih treba odlagati odvojeno. Odlaganje na komunalnom sabirnom mjestu od strane privatnih osoba je besplatno. Vlasnik starih ureaja duan je donijeti ureaje do tih sabirnih mjesta ili slinih sabirnih mjesta. Ovim malim osobnim naporom doprinosite recikliranju vrijednih sirovina i pravilnoj obradi otrovnih tvari. Ekologick likvidcia Star elektrospotrebie sa nesm likvidova spolu so zvykovm odpadom, ale musia sa zlikvidova samostatne. Likvidcia v komunlnom zbernom mieste prostrednctvom skromnch osb je bezplatn. Majite starch spotrebiov je zodpovedn za prinesenie spotrebiov na tieto zbern miesta alebo na podobn zbern miesta. Tmto malm osobnm silm prispievate k recyklovaniu cennch surovn a spracovaniu toxickch ltok. Utylizacja przyjazna dla rodowiska Nie mona usuwa starych urzdze elektrycznych wraz z pozostaymi odpadami. Wymagaj one oddzielnej utylizacji. Utylizacja przez osoby prywatne w punkcie zbirki odpadw komunalnych jest darmowa. Waciciel starych urzdze jest odpowiedzialny za dostarczenie ich do takich lub podobnych punktw zbirki. Zadajc sobie tak niewielki trud, przyczyniasz si do recyklingu cennych surowcw i odpowiedniego postpowania z substancjami toksycznymi. Krnyezetbart hulladkkezels A rgi elektromos kszlkeket nem szabad a nem szelektven gyjttt hulladkkal egytt kidobni, hanem a hulladkkezelsket elklntve kell vgezni A kzssgi gyjtpontokon a magnszemlyek ingyenesen leadhatjk ezeket. A rgi kszlkek tulajdonosai felelnek azrt, hogy e kszlkeket ezekre a gyjtpontokra, vagy ms gyjtpontokra elhozzk. Ezzel a kis szemlyes erfesztssel n is hozzjrul az rtkes nyersanyagok jrahasznostshoz s a mrgez anyagok kezelshez. Miljvnlig hantering av avfall Gamla elektriska apparater fr inte kasseras tillsammans med restavfallet utan mste kasseras separat. Kassering p den lokala insamlingsplatsen fr privatpersoner r gratis. garen av gamla apparater ansvarar fr att ta apparaterna till dessa insamlingsplatser eller till liknande insamlingsplatser. Med denna lilla personliga insats bidrar du till tervinning av vrdefulla rvaror och hantering av giftiga mnen. Umhverfisvn frgun Ekki m farga gmlum raftkjum me rgangsleifum, heldur arf a farga eim srstaklega. Frgun almennum sfnunarstum er keypis fyrir einstaklinga. Eigandi gamalla tkja ber byrg a koma me tkin essa sfnunarstai ea svipaa sfnunarstai. Me essu litla persnulega taki stular a endurvinnslu vermtra hrefna og mefer eitrurefna. evre dostu bertaraf Eski elektrikli cihazlar, dier atklarla birlikte bertaraf edilmemeli, ayrca atlmaldr. zel kiiler araclyla genel toplama noktasna bertaraf ilemi cretsiz olarak yaplmaktadr. Eski cihazlarn sahibi, cihazlar bu toplama noktalarna veya benzer toplama noktalarna getirmekten sorumludur. Bu az miktardaki kiisel abayla, deerli ham maddelerin geri dntrlmesine ve toksik maddelerin ileme alnmasna katkda bulunmu olursunuz. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS 107 DJI Support DJI DJI DJI DJI DJI Support Servicio de asistencia de DJI Service client DJI Assistenza DJI DJI-ondersteuning Assistncia da DJI Suporte DJI DJI http://www.dji.com/support This content is subject to change. Download the latest version from www.dji.com/matrice-300 If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. MATRICE is a trademark of DJI. Copyright 2020 DJI All Rights Reserved. Printed in China. 3GMDTRMA02

CIT Matrice 300 RTK Vereen FCC ID: SS3-M3001910 IC: TI8O05A-M3001910 CMIIT ID; 2019AP11999 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2.This device must accept any interference received, including interference that may cause undesired operation. VET Viccet toh Nay APNE =Oin]\ (0) ROC) MOO ME MIP MS ye aol cse eta isU Nl 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, China Mere MM@l aM SEsC ott Gu PE ayey R-C-dji-M300 CCXXxxLPyyyZxw OCC COCO eueed VN OMe ia

SZ DJI TECHNOLOGY CO., LTD Add: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China Tel: 0755-86152250 Fax: 0755-86965903 E-mail:certification@dji.com FCC Confidential Authorization Date: 2020-02-05 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: SS3-M3001910 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, SZ DJI TECHNOLOGY CO., LTD, hereby requests long-term confidential treatment of information accompanying this application as outlined below:

As well as short-term (secrecy cycle: 180days) confidential treatment of information application as outlined below:

The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Block Diagram Schematics Operation Description Internal Photos Users Manual External Photos Test Set-up Photos Sincerely, Signature Name: wang fajia Title: Project Manager QA-FR-172-A

SZ DJI TECHNOLOGY CO., LTD Add: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China Tel: 0755-86152250 Fax: 0755-86965903 E-mail:certification@dji.com Date: 2020-02-05 To:

FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: FCC ID: SS3-M3001910 declaration of frequency bands restriction Declaration Dear Sir or Madam, We, SZ DJI TECHNOLOGY CO., LTD, hereby declare that our product Matrice 300 RTK, Model Number: M300 have the ability to work in 5G 4 frequency bands:

5150~5250MHz, 5250~5350MHz, 5470~5725MHz, 5725~5850MHz. For the purpose of marketing, the frequency of the product sold in U.S. are programmed and locked to work only in 5725~5850MHz. The other frequency bands 5150~5250MHz, 5250~5350MHz, 5470~5725MHz are disabled by firmware in factory. The end user or any other parties can not have the capability to activate the other frequency bands. We applied for testing frequency bands: 2.4G and 5728.5~5846.5MHz for the United States this time in BACL. Please contact me if you have any question. Signature:

Name: wang fajia Title:Project Manager

SZ DJI TECHNOLOGY CO., LTD Add: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China Tel: 0755-86152250 Fax: 0755-86965903 E-mail:certification@dji.com FCC Authorization Date: 2020-02-05 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We , SZ DJI TECHNOLOGY CO., LTD, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Name: wang fajia Title:Project Manager QA-FR-170-B