FCC ID: SS3-PM8201512 Matrice 600

DJI MATRICE 600 User Manual V 1.0 2015.12 Installation Mounting the Frame Arms Propeller CW or CCW Mark Propeller Cover Power Cables Screw Holes ESC Signal Cable Screw Motor Arm Tube Arm Screws ESC Indicator 1. Preparing the frame arms. 1) Check all propellers for cracks. Ensure all the screws are secured in position. 2) Ensure all motors are mounted correctly and firmly and free from obstruction. 3) Ensure that all the cables are intact. 4) Mount all arms with red motor base to M1 and M2 (both sides of the N0.1 battery compartment) to indicate the nose direction of the M600. 5) Identify the CW and CCW marks on the propellers. Mount the frame arms with the CCW mark to M1, M3 and M5 positions of the center frame. Mount the arms with the CW mark to M2, M4 and M6 positions of the center frame. 2. Insert the frame arm into the arm connector on the center frame with the propeller outwards. Rotate the frame arm to align the screw holes on the frame arm and the connector. Then insert and tighten four M3x6.5 screws. 3. Pull the cables of the frame arm through the arm stopper and the wire outlet on the lower plate of the center frame. Then insert the stopper into the arm connector. 4. Gently lift the frame arm. 2015 DJI. All Rights Reserved. 2 5. Twist the red knob to lock each arm in place. Be sure there is an audible click, which indicates a proper lock. Check the arm for movement. To store, untwist the knob and lower the frame arm. 6. Remove the lower cover of the center frame to connect the power cables and the ESC signal cable. 7. Pull all the cables of the frame arm through the cable fixing ring on bottom of the center frame. 8. Plug each ESC signal cable into the slot near each arm on the center frame. 9. Connect the power cables to the center frame. Each cable must be screwed into a positive (+) or negative (-) gold bracket. Each bracket will have two cables of the same color screwed into it. Red cables are positive and black cables are negative. Power Cables Cable Fixing Ring ESC Signal Cable Power Cables Lower Cover of the Center Frame ESC Signal Cable 10. Ensure all ESC cables, and power cables are correctly installed onto the center frame. 11. Double check all frame arms. Frame arms M1 and M2 are the forward facing (nose direction), frame arms M4 and M5 are facing backward. Seen from the top, motors on arms M1, M3 and M5 rotate counter clockwise while those on arms M2, M4 and M6 rotate clockwise. 2015 DJI. All Rights Reserved. 3 Mounting the Servo Set DO NOT mix the mounting position between the left and right servo set. Identify the left servo set by locating the control board that is integrated on the left servo set. Control Board

(Left servo set only) Power Cable Servo Servo Cable 1. Insert the servo mounting rod into the outer mounting hole on the center frame, mounting holes on the servo set and inner mounting hole on the center frame respectively. Ensure that the left servo set is mounted on the left hand side (seeing from tail)of the aircraft. 2. Align the screw holes of the connector on the center frame and the screw holes on the middle of the servo set. Insert and tighten two M3x6.5 screws (thumb). 2015 DJI. All Rights Reserved. 4 3. Align the cable fixing ring and the screw holes on the bottom of the servo set. Tighten the M3x5 screws. 4. Tighten the M3x6.5 screws to secure the servo set on the mounting rod. M3x6.5 5. Connecting the Servo Cables. 1) Connect the left servo cable to L port on the control board. 2) Connect the right servo cable to R port on the control board. Right Servo Cable Left Servo Cable 2015 DJI. All Rights Reserved. 5 Mounting the Landing Gear Do not mix the cabling between the left and right servo, otherwise the landing gear cannot function properly. Arrange the wiring neatly to avoid the cables being cut by frame edges. The antennas are attached to the landing gears on its delivery. Pull out the antenna cables from the landing gear legs before mounting. Antenna Antenna Cable 1) Insert one landing gear leg into each landing skid tube and secure it in place by tightening the M38 (socket cap) screw. 2) Insert the landing gear leg into the connector on the servo set. DO NOT damage the antenna cable. 3) Rotate the landing gear leg until its slots are aligned to the fins in the connector. Then tighten the M3x8 screws on the connector. 4) Connect both springs on the legs to the center frame. M3x8

(Socket cap) Fins in the connector Note the initial length of spring is 58.5 mm and it is stretched to 70 mm in its final position. Mounting the Lightbridge 2 Air System 1. Remove the upper cover of the center frame, four M3x6.5 screws (thumb), mounting plate and the flight controller. 2015 DJI. All Rights Reserved. 6 Lightbridge 2 Air System Wire Outlets 2. Open the fixing bracket and then remove the Lightbridge 2 air system. 3. Pull the two antenna cables from the triangular wire outlets (between M4 and M5) on the lower plate of the center frame. Connect them to the antenna ports on the Lightbridge 2 air system. 4. Mount the Lightbridge 2 air system back into the bracket. DO NOT damage the antenna cables. If using the AV / HDMI port of the Lightbridge 2 air system, connect the corresponding cables first. 5. Connect the Micro USB cable on back of the Aircraft Status Indicator to the Micro USB port of the Lightbridge 2 air system. Install the antennas before powering on the Air System. When connecting the antennas, ensure the connector pin is aligned with the port hole, and DO NOT apply excessive force to avoid damaging the pin. Mounting the Flight Controller 1. Connect the F1 port of the flight controller to the IN port of the landing gear control board via the servo cable. 2015 DJI. All Rights Reserved. 7 2. Connect the servo cables from No.1 to No.6 to the corresponding port of the flight controller. Connect the No.7 servo cable to the M7 port of the flight controller. Connect the No.9 servo cable to the iESC port of the flight controller. 3. Connect the Aircraft Status Indicator cable to the LED port of the flight controller. 4. Connect the DBUS port of the Lightbridge 2 air system to the RF port of the flight controller via the DBUS cable. Use the included DBUS cable ONLY. Otherwise the Lightbridge 2 air system cannot function properly. 5. If using a DJI gimbal, refer to the corresponding user manual for more information on how to connect. 6. Re-mount the flight controller mounting plate with four M3x6.5 screws (thumb). Mounting GPS Module 1. Attach the collapsible GPS mount to one side of the center frame using M2.58 screws. 2. Mount a GPS module to the GPS mount with a strut. Ensure the arrow points toward the nose (M1, M2). Insert two M2x4 screws into the two connectors above and under the extension rod. 3. Attach the CAN HUB of the GPS module onto the plate of the center frame. 4. Plug the CAN cable into the CAN1 port on the flight controller. Mount the GPS with an extension rod to avoid interference from the center frame power board. Ensure the extension rod is firm and stable before every flight. Avoid catching your fingers in the collapsible mount when folding for transportation. 2015 DJI. All Rights Reserved. 8 Mounting the Upper and Lower Covers of the Center Frame 1. Re-mount the upper cover of the center frame. Note that the arrow points toward the nose (M1, M2) and DO NOT damage the cables. 2. Re-mount the lower cover of the center frame. Note that the two square holes are aligned to the two XT30 ports on the lower plate of the center frame. DO NOT damage the cables. 3. Connect the servo power cable to the XT30 port (6S LiPo) on the lower plate of the center frame. 2015 DJI. All Rights Reserved. 9 Intelligent Flight Battery Installing the Battery There are six battery compartments on the M600. Six intelligent flight batteries are required to fly the aircraft. Its strongly recommended to fully charge all the intelligent flight batteries before using them together. Insert the six Intelligent Flight Batteries into the battery compartments. Powering ON/OFF Power Button

(Built-in LED) Powering On: Press the Power Button once, then press again and hold for 2 seconds to power on. The Power LED will turn red and the Battery Level Indicators will display the current battery level. Powering Off: Press the Power Button once, then press again and hold for 2 seconds to power off. The M600 has six intelligent flight batteries and advanced battery management system. When powering on one of the batteries, the battery management system will read all batteries information and judge the power supply conditions. If the power supply is OK, other batteries will power on automatically. Otherwise, there will be a prompt on the DJI GO app. Power off just one of the batteries, and then other batteries will power off automatically. If there is a prompt on the DJI GO app, follow the tips to adjust your batteries. 2015 DJI. All Rights Reserved. 10 Remote Controller Preparing Remote Controller Tilt the Mobile Device Holder to the desired position then adjust the antenna as shown. Remote Controller Diagram

[1] Antennas Relays aircraft control and video signal.

[2] Mobile Device Holder Mounting place for your mobile device.

[3] Control Stick Controls aircraft orientation.

[4] Return Home (RTH) Button Press and hold the button to initiate Return to Home (RTH).

[5] Transformation Switch Toggle the switch up or down to raise of lower the landing gear.

[6] Battery Level LEDs Displays the current battery level. 2015 DJI. All Rights Reserved. 11

[7] Status LED Displays the power status.

[8] Power Button Used to power on or power off the remote controller.

[9] RTH LED Circular LED around the RTH button displays RTH status.

[10] Camera Settings Dial Turn the dial to adjust camera settings. Only functions when the remote controller is connected to a mobile device running the DJI GO app.

[11] Playback Button Playback the captured images or videos.

[12] Shutter Button Press to take a photo. If in burst mode, the set number of photos will be taken with one press.

[13] Flight Mode Switch Used to switch between P, A and F mode.

[14] Video Recording Button Press to start recording video. Press again to stop recording.

[15] Gimbal Dial Use this dial to control the tilt of the gimbal.

[16] Micro USB Port Reserved.

[17] SDI Port Connect a SDI display device. 2015 DJI. All Rights Reserved. 12

[18] HDMI OUT Port Connect an HD compatible monitor.

[19] USB Port Connect to mobile device to access all of the DJI GO app controls and features.

[20] GPS Module Used to pinpoint the location of the remote controller.

[21] Back Left Button Customizable button in DJI GO app.

[22] Back Right Button Customizable button in DJI GO app.

[23] Power Port Connect to a power source to charge the remote controllers internal battery. Remote Controller Operations Powering On and Off the Remote Controller The M600 remote controller is powered by a 2S rechargeable battery with a capacity of 6000mAh. The battery level is indicated by the Battery Level LEDs on the front panel. Follow the steps below to power on your remote controller:

1. When powered off, press the Power Button once and the Battery Level LEDs will display the current battery level. 2. Then, press and hold the Power Button to power on the remote controller. 3. The Remote Controller will beep when it powers on. The Status LED will blink green (slave remote controller blinks solid purple) rapidly, indicating that the remote controller is linking to the aircraft. The Status LED will show a solid green light when linking is completed. 4. Repeat step 2 to power off the remote controller after finish using it. 2015 DJI. All Rights Reserved. 13 Charging Remote Controller Charge the remote controller via supplied charger. Controlling Camera Shoot videos or images and adjust camera settings via the Shutter Button, Camera Settings Dial, Playback Button and Video Recording Button on the remote controller.

[1] Camera Settings Dial Turn the dial to quickly adjust camera settings such as ISO and shutter speed without letting go of the remote controller. Move the dial button to left or right to view the pictures or videos in playback mode.

[2] Playback Button Press to view images or videos that have already been captured.

[3] Shutter Button Press to take a photo. If burst mode is activated, multiple photos will be taken with a single press.

[4] Recoding Button 2015 DJI. All Rights Reserved. 14 Press once to start recording video, then press again to stop recording. Connecting Mobile Device 1. Press the button on the side of the Mobile Device Holder to release the clamp, adjust it to fit then attach your mobile device. 2. Connect your mobile device to the remote controller with a USB cable. 3. Plug one end of the cable into your mobile device, and the other end into the USB port on the back of the remote controller. Optimal Transmission Range The signal transmission between aircraft and remote controller perform best within the range that displayed in the picture shown below:

Optimal Transmission Range Strong Weak Ensure the aircraft is flying within the optimal transmission range. Adjust the distance and position between the operator and the aircraft to achieve optimal transmission performance. Remote Controller LED The Status LED reflects connection status between Remote Controller and aircraft. The RTH LED shows the Return to Home status of the aircraft. The table below contains details on these indicators. Status LED RTH LED 2015 DJI. All Rights Reserved. 15 Status LED Alarm Remote Controller Status Solid Red chime The remote controller is not connected with the aircraft. Solid Green chime The remote controller is connected with the aircraft. Blinking Red D-D-D...... Remote controller error. Red and Green/ Red and None HD Downlink is disrupted. Yellow Alternate Blinks RTH LED Sound Aircraft Status Solid White chime Return to Home procedure begins. Blinking White D . Sending Return to Home command to the aircraft. Blinking White DD .. . . Aircraft Return to Home in progress. 2015 DJI. All Rights Reserved. 16 DJI GO App Use this app to control the gimbal, camera and other features of your flight system. The app also comes with the Library, Explore, and Me sections for configuring your aircraft and sharing your content with friends. It is recommended that you use a tablet for the best experience. When connecting to the aircraft for the first time, ensure your mobile device is connected to the internet and follow the instructions to set up the app. Equipment On the Equipment page, you can enter Camera View, visit the Academy or view your flight records. Camera View

[1] Flight Mode

: The text next to this icon indicates the current flight mode. Tap to enter MC (Main Controller) settings. Modify flight limits, perform compass calibration, and set the gain values on this screen.

[2] GPS Signal Strength

: This icon shows the current strength of GPS signals. Green bars indicates adequate GPS strength.

[3] System Status

: This icon shows current aircraft system status, such as GPS signal health.

[4] Battery Level Indicator

: The battery level indicator dynamically displays the battery level. The color zones on the battery level indicator represent different battery levels.

[5] Remote Controller Signal 2015 DJI. All Rights Reserved. 17

: This icon shows the strength of remote controller signal.

[6] HD Video Link Signal Strength

: This icon shows the HD video downlink signal strength between the aircraft and the remote controller.

[7] Battery Level

: This icon shows the current Intelligent Flight Battery level. Tap to enter battery information menu, set the various battery warning thresholds and view the battery warning history in this page.

[8] General Settings

: Tap this icon to enter General Settings page. Select parameter units, reset the camera, enable the quick view feature, adjust the gimbal roll value and toggle flight route display on this page.

[9] Camera Operation Bar Function

: Tap to adjust camera settings, such as video format and digital filters. Shutter

: Tap this button to take a single photo. Record

: Tap once to start recording video, then tap again to stop recording. You can also press the Video Recording Button on the remote controller, which has the same function. Playback

: Tap to enter playback page. You can preview photos and videos as soon as they are captured. Camera Settings and Shooting Mode

: Tap to enter the Camera Settings page and switch from camera shooting mode from manual to auto.

[10] Map Display the flight path of the current mission. Tap to switch from the Camera GUI to the Map GUI.

[11] Flight Telemetry 2015 DJI. All Rights Reserved. 18 Flight Parameters:

Height: Vertical distance from home point. Distance: Horizontal distance from home point. Vertical Speed: Vertical flying speed. Horizontal Speed: Horizontal flying speed. Flight Attitude and Radar Function:

Flight attitude is indicated by the flight attitude icon.

(1) The red arrow shows which direction the aircraft is facing.

(2) Light blue and dark blue areas indicate pitch.

(3) Pitching of the boundary between light blue and dark blue area shows roll angle.

[12] Home Point Settings

: Tap this button to reset the current home point. You may choose to set the aircraft take-off location, the remote controllers current position, or the aircrafts current position as the Home Point.

[13] Return to Home (RTH)

: Initiate RTH home procedure. Tap to have the aircraft return to the latest home point.

[14] Gimbal Operation Mode

[15] Auto Takeoff/Landing

: Tap to initiate auto takeoff or landing.

[16] Livestream

: This icon indicates the current video feed is being broadcast live on YouTube. Ensure that mobile data service is available on your mobile device.

[17] Back

: Tap to return to the main GUI. Library Director is an intelligent video editor built into the DJI GO app. After recording several video clips and downloading them to your mobile device, go to Director on the home screen. You can then select a template and a specified number of clips which are automatically combined to create a short film that can be shared immediately. Explore Find out about our latest events, featured products and trending Skypixel uploads in the Explore page. 2015 DJI. All Rights Reserved. 19 Me If you already have a DJI account, you will be able to participate in forum discussions, earn Credits in the DJI Store, and share your artwork with the community. 2015 DJI. All Rights Reserved. 2 0 Flight Aircraft Status Indicator Aircraft Status Indicator Aircraft Status Indicator shows the system status of the flight controller. Refer to the table below for more information about the Aircraft Status Indicator:

Aircraft Status Indicator Description Normal Alternatively Red, Green and Yellow Flash Power on and self-check x4 Blinks Yellow Four Times Aircraft warming up Green Flashes Slowly Safe to Fly (P mode with GPS) Yellow Flashes Slowly Safe to Fly (A mode but No GPS) Warning Fast Yellow Flashing Remote Controller Signal Lost Slow Red Flashing Low Battery Warning Fast Red Flashing Critical Low Battery Warning Red Flashing Alternatively IMU Error Solid Red Critical Error Red and Yellow Flash Alternatively Compass Calibration Required Starting/Stopping the Motors Starting Motors The Combination Stick Command (CSC) listed below are used to start the motors instead of simply pushing the stick 2015 DJI. All Rights Reserved. 21 up. Ensure that you perform the CSC in one motion. Stopping Motors There are two methods to stop the motors. Method 1: When the M600 has landed, push the throttle down, then conduct CSC. Motors will stop immediately. Release both sticks once motors stop. Method 2: When the aircraft has landed, push the throttle down and hold. The motors will stop after 3 seconds. DO NOT perform CSC when aircraft is in midair, otherwise the motors will be stopped. 2015 DJI. All Rights Reserved. 22 Specifications Structure Diagonal Wheelbase 1133.5 mm Dimensions 1668 mm1517 mm 749 mm (with propellers, frame arms and GPS mount unfolded) 1133 mm 981 mm 749 mm (with propellers folded, frame arms and GPS mount unfolded) 557 mm 519 mm 551 mm (with propellers, frame arms and GPS mount folded) Weight (with six TB47S batteries) Weight (with six TB48S batteries) Max Takeoff Weight Performance 8810 g 9320 g 14.8 kg Hovering Accuracy (P Mode) Vertical: 0.5 m, Horizontal: 1.5 m Max Angular Velocity Pitch: 300/s, Yaw: 150/s Max Tilt Angle Max Ascent Speed Max Descent Speed Max Wind Speed Resistance 25 5 m/s 3 m/s 8 m/s Max Speed 20 m/s (ATTI mode, no payload, no wind) 19 m/s (GPS mode, no payload, no wind) 17 m/s (ATTI or GPS mode, using six TB47S Intelligent Flight Batteries with payload of 6 kg, no wind) Hovering Time (with six TB47S batteries) No payload: 42 min, with payload of 6 kg: 16 min Hovering Time (with six TB48S batteries) No payload: 45 min, with payload of 5.5 kg: 18 min

* The hovering time data is based on no-wind environment, hovering at 10 m above the sea level until landing with a battery level of 10%

2015 DJI. All Rights Reserved. 23 Propulsion System Motor Model Propeller Model DJI 6010 DJI 2170 ESC Model DJI E SERIES 1240 Flight Control System Model Other A3 Operating Temperature Range

-10 to 40C Zenmuse X3, Zenmuse X5;

Zenmuse Z15 Series HD Gimbal:

Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4;

Ronin-M Standard Compatible DJI Gimbals Retractable Landing Gear Remote Controller Operating Frequency 920.6 MHz~928 MHz (Japan Only) 5.725~5.825 GHz; 2.400~2.483 GHz Transmitting Distance

(unobstructed, FCC: 5 km free of interference) CE: 3.5 km EIRP 10 dBm @ 900 m, 13 dBm @ 5.8 G, 20 dBm @ 2.4 G Video Output Port USB, Mini-HDMI Power Supply Built-in battery Charging DJI charger Mobile Device Holder Tablet or Smart Phone Output Power 9 W Operating Temperature Range

-10 to 40C 2015 DJI. All Rights Reserved. 24 Storage Temperature Range Less than 3 months: -20 to 45C More than 3 months: 22 to 28C Charging Temperature Range 0 to 40C Battery 6000 mAh LiPo 2S Max Tablet Width 170 mm Charger Model Voltage Rated Power Battery (Standard) Model Capacity Voltage Battery Type Energy Net Weight A14-100P1A 26.3 V 100 W TB47S 4500 mAh 22.2 V LiPo 6S 99.9 Wh 595 g Operating Temperature Range

-10 to 40C Storage Temperature Range Less than 3 months: -20 to 45C More than 3 months: 22 to 28C Charging Temperature Range 0 to 40C Max Charging Power 180 W Battery (Optional) Name Model Capacity Intelligent Flight Battery TB48S 5700 mAh 2015 DJI. All Rights Reserved. 25 Voltage Battery Type Energy Net Weight 22.8 V LiPo 6S 129.96 Wh 680 g Operating Temperature Range

-10 to 40C Storage Temperature Range Less than 3 months: -20 to 45C More than 3 months: 22 to 28C Charging Temperature Range 0 to 40C Max Charging Power 180 W 2015 DJI. All Rights Reserved. 26 FCC Warning Message Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This M600 should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IC RSS Warning This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 2015 DJI. All Rights Reserved. 27 IC Radiation Exposure Statement:

This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This should be installed and operated with minimum distance 20cm between the radiator& your M600 body. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. KCC Warning Message

. NCC Warning Message Administrative Regulations on Low Power Radio Waves Radiated Devices warning:

Article 12 Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices. Article 14 The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. 2015 DJI. All Rights Reserved. 28