FCC ID: SS3-RD2424R Omnidirectional Digital Radar/CSM Radar

 

AGRAS T10

Quick Start Guide

v1.0

Aircraft

The AGRASTM T10 features a design including a brand-new quadrilateral folding structure and a quick-release spray tank

and flight battery, making replacement, installation, and storage easy. With the updated Route Operation mode users can

mark obstacles outside of the operation area for Smart Continuous Flight.

The aircraft supports centimeter-level positioning when used with the onboard D-RTKTM. Dual-antenna technology

provides strong resistance against magnetic interference. The aircraft comes equipped with the Spherical Perception

Radar System, a pioneering new system for the agriculture industry. Consisting of the Omnidirectional Digital Radar and

Upward Radar, the system provides functions such as terrain following, obstacle sensing, and obstacle circumventing.

With the forward and backward FPV cameras and bright spotlights, the system comprehensively ensures operational

safety day and night in different weather.

The spraying system adopts a 10 L spray tank, four nozzles, and a 2-channel electromagnetic flow meter to ensure

consistent and accurate spraying, save the pesticide, and reduce operating costs effectively.

Core components have two layers of protection and the aircraft has a protection rating of IP67 (IEC standard 60529,

except for the Intelligent Flight Battery) so that it can be washed directly with water.

Rear View

Folded

1. Propellers

2. Motors

3. ESCs

4. Aircraft Front Indicators (on two front arms)

5. Frame Arms

6. Folding Detection Sensors (built-in)

7. Hoses

8. Sprinklers

9. Electromagnetic Exhaust Valves

10. Nozzles

11. Omnidirectional Digital Radar

12. Upward Radar (built-in)

13. Heat Sinks

14. Spread Tank

15. Battery Compartment

16. Forward FPV Camera

17. Backward FPV Camera

18. Landing Gear

19. OCUSYNCTM Antennas

20. Onboard D-RTKTM Antennas

21. Aircraft Status Indicators (on two rear arms)

Remote Controller

The Smart Controller Enterprise uses DJI OcuSync Enterprise transmission technology, has a max transmission distance

of up to 7 km*, and supports Wi-Fi and Bluetooth. The remote controller has a 5.5-inch bright, dedicated screen and

comes with the updated DJI Agras app built-in, delivering a smooth and easy-to-use experience. When the RTK dongle is

connected to the remote controller, users can plan operations to centimeter-level precision. The Multi-Aircraft Control

mode* of the remote controller can be used to coordinate the operation of up to five aircraft at the same time, enabling

pilots to work efficiently. Both the built-in battery and external battery can be used to supply power to the remote

controller. The remote controller has a working time of up to 4 hours, making it ideal for long and high-intensity

operations.

1. Antennas

2. Back/Function Button

3. Control Stick

4. RTH Button

5. Button C3 (customizable)

6. Flight Mode Switch

7. Status LED Descriptions

8. Battery Level Indicators

9. 5D Button (customizable)

10. Power Button

11. Confirm Button

12. Touch Screen

13. USB-C Charging Port

14. Dongle Compartment Cover

15. Spray Rate Dial

16. Spray Button

17. HDMI Port

18. microSD Card Slot

19. USB-A Port

20. FPV/Map Switch Button

21. Work Efficiency Dial

22. Air Outlet

23. Button C1 (customizable)

24. Button C2 (customizable)

25. Battery Cover

26. Battery Cover Release Button

27. Handle

The figure below shows the function that each control stick movement performs and uses Mode 2 as an example. In

Mode 2, the left stick is used to control the altitude and heading of the aircraft while the right stick is used to control the

forward, backward, left, and right movements.



* The remote controller is able to reach its maximum transmission distance (FCC/NCC: 7 km (4.35 mi); SRRC: 5 km (3.11

mi); CE/KCC/MIC: 4 km (2.49 mi)) in an open area with no electromagnetic interference, and at an altitude of

approximately 2.5 m (8.2 ft).

Make sure to comply with local laws and regulations when using Multi-Aircraft Control mode.

Fly Safe

people, or animals.

you.

Home.

It is important to understand some basic flight guidelines, both for your protection and for the safety of those around

1. Flying in Open Areas: pay attention to utility poles, power lines, and other obstacles. DO NOT fly near or above water,

2. Maintain Control at All Times: keep your hands on the remote controller and maintain control of the aircraft when it

is in flight, even when using intelligent functions such as the Route and A-B Route operation modes and Smart Return to

3. Maintain Line of Sight: maintain visual line of sight (VLOS) with your aircraft at all times and avoid flying behind

buildings or other obstacles that may block your view.

and in accordance with all local laws and regulations.

4. Monitor Your Altitude: for the safety of manned aircraft and other air traffic, fly at altitudes lower than 30 m (98 ft)

Visit https://www.dji.com/flysafe for more information on critical safety features such as GEO zones.

Flight Environment Requirements

1. DO NOT use the aircraft to spray in winds exceeding 18 kph (11 mph).

25 mm (0.98 in) in 12 hours, snow, or fog.

3. DO NOT fly more than 4.5 km (14,763 ft) above sea level.

2. DO NOT use the aircraft in adverse weather conditions such as winds exceeding 28 kph (17 mph), heavy rain exceeding

4. Once the operating altitude reaches 1 km (3,280 ft), the payload capacity of the spray tank is reduced by 1.2 kg. For

every additional km, the payload capacity will be reduced a further 1.2 kg.

5. Make sure that there is a strong GNSS signal and the D-RTK antennas are unobstructed during operation.

Return to Home (RTH)

The aircraft will automatically return to the Home Point in the following situations:

Smart RTH: user presses and holds the RTH button.

Failsafe RTH: the remote controller signal is lost.*

If there is an obstacle within 20 m of the aircraft, the aircraft decelerates and brakes and hovers. If the aircraft comes

within 6 m of the obstacle while decelerating, the aircraft brakes, flies backward to approx. 6 m from the obstacle, and

hovers. The aircraft exits RTH and waits for further commands.

If RTH is triggered during Route operations, the aircraft can plan a flight path for RTH to circumvent the obstacles added

when planning a field.

RTH

* If Failsafe RTH is disabled (the default setting in the DJI Agras app), the aircraft hovers in place when the remote

controller signal is lost.

● Obstacle avoidance is disabled when the aircraft is in Attitude mode, which it enters in situations such as when the GNSS

signal is weak. Note that obstacle avoidance is unreliable when using the aircraft in environments where the radar module

cannot operate normally. Extra caution is required in such situations.

Pesticide Usage

1. Avoid the use of powder pesticides as much as possible as they may reduce the service life of the spraying system.

2. Pesticides are poisonous and pose serious risks to safety. Only use them in strict accordance with their specifications.

3. Use clean water to mix the pesticide and filter the mixed liquid before pouring into the spray tank to avoid blocking

the strainer.

4. Effective use of pesticides depends on pesticide density, spray rate, spray distance, aircraft speed, wind speed, wind

direction, temperature, and humidity. Consider all factors when using pesticides.

5. DO NOT compromise the safety of people, animals, or the environment during operation.

It is important to understand the basic flight guidelines, both for your protection and for the safety of those

around you.

Make sure to read the disclaimer and safety guidelines.

Using the T10

1. Preparing the Intelligent Flight Battery

Only use official DJI flight batteries (model: BAX501-9500mAh-51.8V). Check the battery level

before flying and charge according to the corresponding manual document.

2. Preparing the Aircraft

Unfold the M2 and M6 arms, and fasten the two arm locks. Avoid pinching fingers.

Unfold the M3 and M5 arms followed by M1 and M4 and fasten the four arm locks. Avoid pinching fingers.

Unfold the propeller blades.

Insert the Intelligent Flight Battery into the aircraft until you hear a click.

●Make sure that the battery is firmly inserted into the aircraft. Only insert or remove the battery when the aircraft is

powered off.

●To remove the battery, press and hold the clamp and lift the battery up.

●When folding the arms, make sure to fold the M3 and M5 arms first, and then the M2 and M6 arms. Otherwise, the arms

may be damaged. Lift and lower the M1 and M4 arms gently to reduce wear and tear.

3. Preparing the Remote Controller

Charging the Batteries

Charge the external Intelligent Battery using the charging hub and AC power adapter. Charge the internal battery of the

remote controller using the USB charger and USB-C cable. Fully charge the batteries before using for the first time.



Charging Hub

AC Power Adapter Power Outlet (100 - 240 V) USB Charger USB-C Cable

Mounting the External Battery

① Press the battery cover release button on the back of the remote controller down to open the cover.

Battery Release Button

② Insert the Intelligent Battery into the compartment and push it to the top.

③ Close the cover.

●To remove the Intelligent Battery, press and hold the battery release button and push the battery downward.

Mounting the 4G Dongle and SIM Card

●Only use a DJI-approved dongle. The dongle supports various network standards. Use a SIM card that is

compatible with the chosen mobile network provider and select a mobile data plan according to the

planned level of usage.

not be available.

●The dongle and SIM card enable the remote controller to access specific networks and platforms such as

the DJI Agras Management Platform. Make sure to insert them correctly. Otherwise, network access will

① Remove the dongle compartment cover.

③ Reattach the cover firmly.

② Make sure the SIM card is inserted into the dongle. Insert the dongle into the USB port and test the dongle.*

* Test procedure: Press the remote controller power button and press again and hold to power on the remote controller.

In DJI Agras, tap

, and select Network Diagnostics. The dongle and SIM card are functioning properly if the status



of all the devices in the network chain are shown in green.

Mounting the RTK Dongle

When using the RTK planning method to plan the operation area, attach the RTK

dongle to the USB-A port on the remote controller.

Checking the Battery Levels

Low → High

L

o

w

→

H

g

h

i

Press the power button on the remote controller once to check the internal battery level. Press once and press again and

hold for two seconds to power on or off.

Press the battery level button on the external Intelligent Battery once to check the battery level.

●When using an external Intelligent Battery, it is still necessary to make sure that the internal battery has some power.

Otherwise, the remote controller cannot be powered on.

Adjusting the Antennas

Lift the antennas and adjust them. The strength of the remote controller signal is

affected by the position of the antennas. For an optimal connection between the

remote controller and aircraft, make sure the angle between the antennas and the

back of the remote controller is 80° or 180°.

Try to keep the aircraft inside the optimal transmission zone. If the signal is weak, adjust the antennas or fly the aircraft

closer.

Optimal Transmission Zone

● Avoid using wireless devices that use the same frequency bands as the remote controller.

● If the RTK dongle is used for RTK planning, the module should be disconnected from the remote controller after planning

is completed. Otherwise, it will affect the communication performance of the remote controller.

4. Getting Ready for Takeoff

A. Place the aircraft on open, flat ground with the rear of the aircraft facing toward you.

B. Make sure that the propellers are securely mounted, there are no foreign objects in or on the motors and propellers,

the propeller blades and arms are unfolded, and the arm locks are firmly fastened.

C. Make sure that the spray tank and flight battery are firmly in place.

D. Pour liquid into the spray tank and tighten the cover. Make sure that the four lines on the cover are aligned to the

horizontal or vertical direction.

required.

E. Power on the remote controller, make sure that the DJI Agras app is open, and power on the aircraft.

● When using for the first time, activate the aircraft using the DJI Agras app. A DJI account and internet connection are

Calibrating the Compass

When the app prompts that compass calibration is required, tap

, then

, and swipe to the bottom. Select

Advanced Settings, then IMU, and Compass Calibration. Tap Calibration in Compass Calibration and follow the on-screen

Make sure to calibrate the flow meter before using for the first time. Otherwise, the spraying performance may be

instructions.

Calibrating the Flow Meter

adversely affected.

A. Preparation: Discharging the Bubbles in the Hoses

① Fill the spray tank with approximately 2 L of water.

② Use the automatic bubbles discharge function to discharge the bubbles according to the descriptions in the

Discharging the Bubbles in the Hoses section below. Users can also manually discharge the bubbles. Press the spray

button to spray the bubbles and press the button again once all bubbles are discharged.

B. Calibration

① In the app, tap Execute Task to enter Operation View. Tap

, then

, swipe down, and tap Calibration on the

right of the flow meter calibration section.

② Tap Start Calibration to begin. Calibration will be complete after 25 seconds and the results are displayed in the app.

●Users can proceed once calibration is completed successfully.

●If calibration fails, tap “?” to view and resolve the problem. Recalibrate once the problem is resolved.

Discharging the Bubbles in the Hoses

The T30 features an automatic bubbles discharge function. When it is necessary to discharge bubbles, press and hold the

spray button for two seconds. The aircraft will discharge automatically until the bubbles are fully discharged.

5. Flight

In the app, go to Operation View. Make sure that there is a strong GNSS signal and the system status bar indicates Manual

Route (GNSS) or Manual Route (RTK).* Otherwise, the aircraft cannot take off.

In order for the aircraft to automatically take off and perform an operation, it is recommended to create a plan for a field

and select an operation before takeoff. Refer to the Starting Operations section for more information. For other scenarios,

take off and land manually.

* RTK positioning is recommended. In the app, go to Operation View, tap

, then RTK to enable Aircraft RTK

Positioning, and select a method for receiving RTK signals.

Takeoff

Perform a Combination Stick Command (CSC) and push the throttle stick up to take off.

OR

Throttle Stick (left stick in Mode 2)

Landing

the motors.

Throttle Stick

To land, pull down on the throttle stick to descend until the aircraft touches the ground. There are two methods to stop

Method 1: when the aircraft has landed, push and hold the throttle stick down. The motors will stop after three seconds.

Method 2: When the aircraft has landed, push the throttle stick down, and perform the same CSC that was used to start

the motors. Release both sticks once the motors have stopped.



● Spinning propellers can be dangerous. Stay away from spinning propellers and motors. DO NOT start the motors in

confined spaces or where there are people nearby.

● Maintain control of the remote controller as long as the motors are running.

● DO NOT stop the motors mid-flight unless in an emergency situation where doing so will reduce the risk of damage or

injury.

● It is recommended to use Method 1 to stop the motors. When using Method 2 to stop the motors, the aircraft may roll

over if it is not completely grounded. Use Method 2 with caution.

●After landing, power off the aircraft before turning off the remote controller.

Starting Operations

After the operation area and obstacles have been measured and settings have been configured, the DJI Agras app uses

a built-in intelligent operation planning system to produce a flight route based on the user’s input. Users can invoke an

operation after planning a field. The aircraft will begin the operation automatically and follow the planned flight route.

In scenarios with complicated terrain, Phantom 4 RTK and DJI TERRATM can be used to plan flight routes and import

routes to the DJI Agras app for operation. Refer to the Agras T30 User Manual for more information.

Field Planning

The DJI Agras app supports flight route planning by flying the aircraft to waypoints, obstacles, and calibration points or

by walking to these points carrying a remote controller, a remote controller with an RTK dongle, or an RTK device. The

following route has been planned by walking to the points with a remote controller that has a RTK dongle connected.

Before planning, make sure that the RTK high precision positioning module is mounted to the remote controller.

Power on the

Tap Plan Field, select Walk

In RTK settings, select a method for receiving RTK signals

remote

with RTK, and Walk with

and configure the corresponding settings. Make sure the

controller.

RTK Dongle.

aircraft status bar at the top of the screen is green.

Launch

DJI

Agras.

Walk with the remote controller

Walk

to each

Walk around the obstacle

alongside the boundary of the

obstacle in turn

and tap Add Obstacle C2

operation area and tap Add

and tap Obstacle

at several points around

Waypoint C2 at turning points.

Mode C1.*

the obstacle.*

Tap Waypoint C1 to return

Walk to the location

to add edge points to the

of each calibration

operation area.

point

and

tap

adjust the route direction by tapping or

Calibration Point.

dragging the icon

.

The waypoints and flight route can be

edited. Fine-tune waypoint positions,

configure distance and line spacing, and

Save the

* Any obstacles in or out of the operation area can be marked.

Once you have finished planning, press the back button on the remote controller to return to the home screen.

●The calibration points are used to offset the bias of the flight route caused by the positioning difference. Choose at least one existing

landmark as the fixed reference point for calibration when executing the same operation. If none are available, use an easily

field

plan.

identifiable object such as a metal stake.

Performing an Operation

Take the aircraft to

Tap Execute Task in the

Tap Edit

to edit

the

one of the calibration

home screen of the

Tap

and select the

waypoints

and

flight

points.

app.

field from the field list.

route again.

Tap Use and tap Rectify

Tap Start.

Offset.

Set operation

Set the auto-takeoff height and move the

parameters

slider to take off. The aircraft will perform

and confirm.

the operation automatically.

● Only take off in open areas and set an appropriate auto-takeoff height according to the operating environment.

● An operation can be paused by moving the control stick slightly. The aircraft will hover and record the breakpoint. After

which, the aircraft can be controlled manually. To continue the operation, select it again from the Executing tag in

list.

The aircraft will return to the breakpoint automatically and resume the operation. Pay attention to aircraft safety when

returning to a breakpoint.

●In Route Operation mode, the aircraft is able to circumvent obstacles, which is disabled by default and can be enabled in

the app. If the function is enabled and the aircraft detects obstacles, the aircraft will slow down and circumvent the obstacles

and return to the original flight path.

● Users can set the action the aircraft will perform after the operation is completed in the app.

More Operation Modes and Functions

Refer to the Agras T30 User Manual for more information about the A-B Route, Manual, and Manual Plus Operation

modes and on how to use functions such as Smart Supply Reminder, Operation Resumption, System Data Protection,

and Empty Tank.

6. Maintenance

Clean all parts of the aircraft and remote controller at the end of each day of spraying:

1. Fill the spray tank with clean water or soapy water and spray the water through the nozzles until the tank is empty.

2. Remove the spray tank strainer, nozzle strainers, and nozzles to clean them and clear any blockage. Afterwards,

Repeat the step twice more.

immerse them in clean water for 12 hours.

3. Use a water-filled washer with a max water pressure of XX MPa to clean the aircraft body and wipe it with a soft brush

or wet cloth before cleaning water residue with a dry cloth.

4. If there is dust or pesticide liquid on the motors and propellers, wipe them with a wet cloth before cleaning water

residue with a dry cloth.

5. Wipe the surface and screen of the remote controller with a clean wet cloth that has been wrung out with water.

Refer to the disclaimer and safety guidelines for more information on product maintenance.

Specifications

Product Model

3WWDZ-10A

Max Diagonal Wheelbase

1480 mm

Airframe

Dimensions

1958×1833×553 mm (arms and propellers unfolded)

1232×1112×553 mm (arms unfolded and propellers folded)

600×665×580 mm (arms and propellers folded)

100×10 mm

84 rpm/V

11.2 kg/rotor

2000 W/rotor

527 g

Propulsion System

Motors

Stator Size

KV

Max Thrust

Max Power

Weight

ESCs

Spraying System

Spray Tank

Volume

Nozzles

Model

Quantity

Max Spray Rate

Max Working Current (Continuous)

32 A

Max Working Voltage

60.9 V (14S LiPo)

Foldable Propellers (R3390)

Diameter

Pitch

Weight (Single propeller)

33×90 in

92 g

Operating Payload

Fully loaded: 10 kg

Fully loaded: 10 L

spray rate)

Flow Meter

Measurement Range

0.25-20 L/min

Error

< ±2%

Measurable Liquid

contain water)

Omnidirectional Digital Radar/CSM Radar

Model

RD2424R

XR11001VS

(standard), XR110015VS, XR11002VS

(optional,

purchase separately)

16

L/min

XR11001VS: 1.8 L/min, XR110015VS: 2.4 L/min, XR11002VS: 3

Spray Width

3-5.5 m (4 nozzles, at a height of 1.5-3 m above crops)

Droplet Size

XR11002VS:190-300 μm (subject to operating environment and

XR11001VS:

130-250

μm,

XR110015VS:

170-265

μm,

Conductivity > 50 μS/cm (liquids such as tap water or pesticides that

Operating Frequency

SRRC/NCC/FCC: 24.05-24.25 GHz

MIC/KCC/CE: 24.05-24.25 GHz

Power Consumption

12 W

Transmission Power (EIRP)

SRRC: < 13 dBm; NCC/MIC/KCC/CE/FCC: < 20 dBm

Altitude Detection &

Terrain

Altitude detection range: 1-30 m

Follow[1]

Stabilization working range: 1.5-15 m

Obstacle Avoidance[1]

Obstacle sensing range: 1.5-30 m

Max slope in Mountain mode: 35°

FOV: Horizontal: 360°, Vertical: ±15°

Working conditions: Flying higher than 1.5 m over the obstacle at a

speed lower than 7 m/s

Safety limit distance: 2.5 m (distance between the front of

propellers and the obstacle after braking)

Obstacle avoidance direction: Omnidirectional obstacle avoidance

in the horizontal direction.

IP Rating

Upward Radar

Model

Operating Frequency

SRRC/NCC/FCC: 24.05-24.25 GHz

MIC/KCC/CE: 24.05-24.25 GHz

Power Consumption

4 W

Transmission Power (EIRP)

SRRC: < 13 dBm; NCC/MIC/KCC/CE/FCC: < 20 dBm

Obstacle Avoidance[1]

Obstacle sensing range: 1.5-15 m

IP67

RD2414U

FOV: 80°

Working conditions: Available during takeoff,

landing, and

ascending when an obstacle is more than 1.5 m above the aircraft.

Safety limit distance: 2 m (distance between the highest point of

the aircraft and the lowest point of the obstacle after braking)

IP Rating

FPV Cameras

FOV

Resolution

Obstacle avoidance direction: Upward

IP67

Horizontal: 129°,Vertical: 82°

1280×720 15-30fps

FPV Spotlights

Flight Parameters

FOV: 120°,Max brightness: 13.2 lux at 5 m of direct light

Operating Frequency

SRRC/NCC/FCC/CE/MIC/KCC: 2.4000-2.4835 GHz

SRRC/NCC/FCC/CE: 5.725-5.850 GHz[2]

Transmission Power (EIRP)

2.4 GHz

SRRC/CE/MIC/KCC: 18.5 dBm, FCC/NCC: 29.5 dBm

5.8 GHz

FCC: 28.5 dBm, SRRC: 20.5 dBm, CE: 12.5 dBm

Total Weight (exc. battery)

12.2 kg

Max Takeoff Weight

26.0 kg (at sea level)

Max Thrust-Weight Ratio

1.70 (takeoff weight of 26.0 kg)

Hovering Accuracy Range

(with

D-RTK enabled: Horizontal: ±10 cm, Vertical: ±10 cm

strong GNSS signal)

D-RTK disabled:

Horizontal: ±0.6 m, Vertical: ±0.3 m (Radar module enabled: ±0.1

m)

RTK/GNSS Operating Frequency

RTK: GPS L1/L2, GLONASS F1/F2, BeiDou B1/B2, Galileo E1/E5[3]

Battery

DJI-approved flight battery (BAX501-29000mAh-51.8V)

GNSS: GPS L1, GLONASS F1, Galileo E1[3]

Max Power Consumption

3700 W

Hovering Power Consumption

3200W (takeoff weight of 26 kg)

Hovering Time[4]

19 min (takeoff weight of 16 kg with an 29000 mAh battery)

8.7 min (takeoff weight of 26 kg with an 29000 mAh battery)

Max Flying Speed

10 m/s (with strong GNSS signal)

Max Tilt Angle

Max Operating Speed

15°

7 m/s

Max Wind Resistance

8 m/s

Max Service Ceiling Above Sea Level

4500 m

Recommended

Operating

< 93%

Recommended

Operating

0° to 40° C (32° to 104° F)

Temperature

Temperature

Remote Controller

Model

RM500-ENT

5.5-in screen, 1920×1080, 1000 cd/m2, Android system

Screen

GNSS

Built-in Battery

18650 Li-ion (5000 mAh @ 7.2 V)

GPS+GLONASS

Power Consumption

18 W

Operating Temperature

-10° to 40° C (14° to 104° F)

Charging Environment Temperature

5° to 40° C (41° to 104° F)

Storage Temperature

-30° to 25° C (-22° to 77° F)

OcuSync 2.0

Operating Frequency

SRRC/NCC/FCC/CE/MIC/KCC: 2.4000-2.4835 GHz

Effective

Transmission Distance

SRRC: 5 km, FCC: 7 km, MIC/KCC/CE: 4 km

SRRC/NCC/FCC/CE: 5.725-5.850 GHz[2]

(Unobstructed, free of interference)

Transmission Power (EIRP)

2.4 GHz

Operating Frequency

2.4000-2.4835 GHz

Transmission Power (EIRP)

2.4 GHz

SRRC/CE/MIC/KCC: 18.5 dBm, FCC/NCC: 29.5 dBm

5.8 GHz

FCC: 28.5 dBm, SRRC: 20.5 dBm, CE: 12.5 dBm

Wi-Fi Direct, Wi-Fi Display, 802.11a/g/n/ac

Wi-Fi with 2×2 MIMO

5.150-5.250 GHz

5.725-5.850 GHz[2]

5.2 GHz

5.8 GHz

Bluetooth 4.2

SRRC/CE: 18.5 dBm, NCC/FCC /MIC/KCC: 20.5 dBm

SRRC/NCC/FCC/CE/MIC/KCC: 14 dBm, KCC: 10 dBm

SRRC/NCC/FCC: 18 dBm, CE/KCC: 12 dBm

Wi-Fi

Protocol

Bluetooth

Protocol

Operating Frequency

2.4000-2.4835 GHz

Transmission Power (EIRP)

SRRC/NCC/FCC/CE/MIC/KCC: 6.5 dBm

Remote Controller Intelligent Battery

Charging Environment Temperature

5° to 40° C (41° to 104° F)

Intelligent Battery Charging Hub

Output Voltage and Current

8.7 V, 6 A

Operating Temperature

5° to 40° C (41° to 104° F)

WB37-4920mAh-7.6V

2S LiPo

4920 mAh

7.6 V

37.39 Wh

WCH2

17.3-26.2 V

A14-057N1A

100-240 V, 50/60 Hz

17.4 V

57 W

Model

Battery Type

Capacity

Voltage

Energy

Model

Input Voltage

AC Power Adapter

Model

Input Voltage

Output Voltage

Rated Power

[1] The effective radar range varies depending on the material, position, shape, and other properties of the obstacle.

[2] Local regulations in some countries prohibit the use of the 5.8 and 5.2 GHz frequencies. In some countries, the 5.2

GHz frequency band is only allowed for indoor use.

[3] Support for Galileo will be available at a later date.

[4] Hovering time acquired at sea level with wind speeds lower than 3 m/s.

Compliance Information

FCC Compliance Notice

operation.

the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause



harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information

Aircraft

Remote Controller

any other antenna or transmitter.

The aircraft complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of

exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal

operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific

operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with

The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications

Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported

under this standard during product certification for use when properly worn on the body.

ISED Compliance Notice

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development

Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This

device must accept any interference, including interference that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et

Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions

suivantes :(1)L’appareil ne doit pas produire de brouillage; (2)L’appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d’en compromettre le fonctionnement.

Aircraft

This equipment complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be

installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or

operating in conjunction with any other antenna or transmitter.

Cet équipement est conforme aux limites d'exposition aux radiations CNR-102 établies pour un environnement non contrôlé. Cet

équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific

operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with

any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by

Remote Controller

the ISED.

These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard

during product certification for use when properly worn on the body.

Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies pour un environnement non contrôlé.

L’utilisateur final doit suivre les instructions spécifiques pour satisfaire les normes. Cet émetteur ne doit pas être co-implanté ou

fonctionner en conjonction avec toute autre antenne ou transmetteur. Le dispositif portatif est conçu pour répondre aux exigences

d’exposition aux ondes radio établie par le développement énergétique DURABLE.

Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur SAR la plus élevée signalée en vertu de cette

norme lors de la certification de produit à utiliser lorsqu’il est correctement porté sur le corps.

KCC Compliance Notice

“해당무선설비는 운용 중 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다.”

“해당 무선설비는 운용 중 전파혼신 가능성이 있음”

NCC Compliance Notice

取得審驗證明之低功率射頻器材，非經核准，公司、商號或使

用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經

發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理法規定作業之無線電通信。低

功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

應避免影響附近雷達系統之操作。

高增益指向性天線只得應用於固定式點對點系統。

EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with the essential

requirements and other relevant provisions of the Directive 2014/53/EU.

A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance

EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

GB Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with the essential

requirements and other relevant provisions of Radio Equipment Regulations 2017.

A copy of the GB Declaration of Conformity is available online at www.dji.com/euro-compliance

Declaración de cumplimiento UE: SZ DJI TECHNOLOGY CO., LTD. por la presente declara que este dispositivo cumple los requisitos básicos

y el resto de provisiones relevantes de la Directiva 2014/53/EU.

Hay disponible online una copia de la Declaración de conformidad UE en www.dji.com/euro-compliance

Dirección de contacto de la UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

EU-verklaring van overeenstemming: SZ DJI TECHNOLOGY CO., LTD. verklaart hierbij dat dit apparaat voldoet aan de essentiële vereisten

en andere relevante bepalingen van Richtlijn 2014/53/EU.

De EU-verklaring van overeenstemming is online beschikbaar op www.dji.com/euro-compliance

Contactadres EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Declaração de conformidade da UE: A SZ DJI TECHNOLOGY CO., LTD. declara, através deste documento, que este dispositivo está em

conformidade com os requisitos essenciais e outras disposições relevantes da Diretiva 2014/53/EU.

Existe uma cópia da Declaração de conformidade da UE disponível online em www.dji.com/euro-compliance

Endereço de contacto na UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Dichiarazione di conformità UE: SZ DJI TECHNOLOGY CO., LTD. dichiara che il presente dispositivo è conforme ai requisiti essenziali e alle

altre disposizioni rilevanti della direttiva 2014/53/EU.

Una copia della dichiarazione di conformità UE è disponibile online all'indirizzo Web www.dji.com/euro-compliance

Indirizzo di contatto UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Déclaration de conformité UE : Par la présente, SZ DJI TECHNOLOGY CO., LTD déclare que cet appareil est conforme aux principales

exigences et autres clauses pertinentes de la directive européenne 2014/53/EU.

Une copie de la déclaration de conformité UE est disponible sur le site www.dji.com/euro-compliance

Adresse de contact pour l'UE : DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

PRÉCAUTIONS D'USAGE DE L'APPAREIL

interférences

N’utilisez pas l’appareil dans un hôpital, un avion ou un équipement automobile en raison des radiofréquences qui peuvent produire des

•Maintenez une distance minimale de 15 cm entre votre appareil et un stimulateur cardiaque pour éviter toute interférence

Eloigner les équipements radioélectriques du ventre des femmes enceintes.

Eloigner les équipements radioélectriques du bas-ventre des adolescents.

Le débit d'absorption spécifique (DAS) local quantifie l'exposition de l'utilisateur aux ondes électromagnétiques de l'équipement concerné.

Le DAS maximal autorisé est de 2 W/ kg pour la tête et le tronc et de 4 W/ kg pour les membres.

La ou les valeurs du débit d'absorption spécifique des RM500-AG:

DAS tronc: 0.085 W/ kg

DAS membres: 0.085 W/ kg

EU-Compliance: Hiermit erklärt SZ DJI TECHNOLOGY CO., LTD., dass dieses Gerät den wesentlichen Anforderungen und anderen

einschlägigen Bestimmungen der EU-Richtlinie 2014/53/EU entspricht.

Eine Kopie der EU-Konformitätserklärung finden Sie online auf www.dji.com/euro-compliance

Kontaktadresse innerhalb der EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Декларация за съответствие на ЕС: SZ DJI TECHNOLOGY CO., LTD. декларира, че това устройство отговаря на основните изисквания

и другите приложими разпоредби на Директива 2014/53/ЕС.

Копие от Декларацията за съответствие на ЕС ще намерите онлайн на адрес www.dji.com/euro-compliance

Адрес за контакт за ЕС: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Германия

Prohlášení o shodě pro EU: Společnost SZ DJI TECHNOLOGY CO., LTD. tímto prohlašuje, že tohle zařízení vyhovuje základním požadavkům

a dalším příslušným ustanovením směrnice 2014/53/EU.

Kopie prohlášení o shodě pro EU je k dispozici on-line na webu www.dji.com/euro-compliance

Kontaktní adresa v EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Německo

EU-overensstemmelseserklæring: SZ DJI TECHNOLOGY CO., LTD. erklærer hermed, at denne enhed er i overensstemmelse med de

væsentlige krav og andre relevante bestemmelser i direktiv 2014/53/EU.

Der er en kopi af EU-overensstemmelseserklæringen tilgængelig online på www.dji.com/euro-compliance

EU-kontaktadresse: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland

Δήλωση Συμμόρφωσης ΕΕ: Η SZ DJI TECHNOLOGY CO., LTD. δια του παρόντος δηλώνει ότι η συσκευή αυτή συμμορφώνεται με τις

βασικές απαιτήσεις και άλλες σχετικές διατάξεις της Οδηγίας 2014/53/EΕ.

Αντίγραφο της Δήλωσης Συμμόρφωσης ΕΕ διατίθεται ηλεκτρονικά στη διεύθυνση www.dji.com/euro-compliance

Διεύθυνση επικοινωνίας στην ΕΕ: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Γερμανία

ELi vastavuskinnitus Käesolevaga teatab SZ DJI TECHNOLOGY CO., LTD., et see seade on kooskõlas direktiivi 2014/53/EL oluliste nõuete ja

muude asjakohaste sätetega.

ELi vastavusdeklaratsiooni koopia on kättesaadav veebis aadressil www.dji.com/euro-compliance

Kontaktaadress ELis: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Saksamaa

Pranešimas dėl atitikties ES reikalavimams Bendrovė „SZ DJI TECHNOLOGY CO., LTD.“ tvirtina, kad šis prietaisas atitinka pagrindinius

2014/53/ES direktyvos reikalavimus ir kitas susijusias nuostatas.

ES atitikties deklaracijos kopiją galite rasti adresu www.dji.com/euro-compliance

ES kontaktinis adresas: „DJI GmbH“, Industriestrasse 12, 97618, Niederlauer, Germany (Vokietija)

ES atbilstības paziņojums: SZ DJI TECHNOLOGY CO., LTD. ar šo apliecina, ka šī ierīce atbilst direktīvas 2014/53/ES pamatprasībām un

pārējiem būtiskiem nosacījumiem.

ES atbilstības deklarācijas kopija pieejama tiešsaistē vietnē www.dji.com/euro-compliance

ES kontaktadrese: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Vācija

EU:n vaatimustenmukaisuusvakuutus: SZ DJI TECHNOLOGY CO., LTD. ilmoittaa täten, että tämä laite on direktiivin 2014/53/EU

olennaisten vaatimusten ja sen muiden asiaankuuluvien ehtojen mukainen.

Kopio EU:n vaatimustenmukaisuusvakuutuksesta on saatavana verkossa osoitteessa www.dji.com/euro-compliance

Yhteystiedot EU:ssa: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

RÁITEAS Comhlíonta an AE: Dearbhaíonn SZ DJI TECHNOLOGY CO., LTD. leis seo go bhfuil an gléas seo de réir na gceanglas riachtanach

agus na bhforálacha ábhartha eile sa Treoir 2014/53/AE.

Tá coip de Dhearbhú Comhréireachta an AE ar fáil ar líne ag www.dji.com/euro-compliance

Seoladh teagmhála san AE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Dikjarazzjoni ta’ Konformità tal-UE: SZ DJI TECHNOLOGY CO., LTD. hawnhekk tiddikjara li dan l-apparat huwa konformi mar-rekwiżiti

essenzjali u ma’ dispożizzjonijiet relevanti oħra tad-Direttiva 2014/53/UE.

Kopja tad-Dikjarazzjoni ta’ Konformità tal-UE hija disponibbli onlajn fis-sit www.dji.com/euro-compliance

Indirizz ta’ kuntatt tal-UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, il-Ġermanja

Declarația UE de conformitate: Prin prezenta, SZ DJI TECHNOLOGY CO., LTD. declară faptul că acest dispozitiv este conform cu cerințele

esențiale și celelalte prevederi relevante ale Directivei 2014/53/UE.

Un exemplar al Declarației UE de conformitate este disponibil online, la adresa www.dji.com/euro-compliance

Adresa de contact pentru UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germania

Izjava EU o skladnosti: Družba SZ DJI TECHNOLOGY CO., LTD. izjavlja, da ta naprava ustreza osnovnim zahtevam in drugim ustreznim

določbam Direktive 2014/53/EU.

Kopija izjave EU o skladnosti je na voljo na spletu na www.dji.com/euro-compliance

Kontaktni naslov EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemčija

EU Izjava o sukladnosti: Tvrtka SZ DJI TECHNOLOGY CO., LTD. izjavljuje da je ovaj uređaj izrađen u skladu s osnovnim zahtjevima i ostalim

relevantnim odredbama Direktive 2014/53/EU.

Kopija EU Izjave o sukladnosti dostupna je na mrežnoj stranici www.dji.com/euro-compliance

Adresa EU kontakta: DJI GmbH, Industriestrasse 12 97618, Niederlauer, Njemačka

Vyhlásenie o zhode EÚ: SZ DJI TECHNOLOGY CO., LTD. týmto vyhlasuje, že toto zariadenie je v zhode so základnými požiadavkami

a ďalšími relevantnými ustanoveniami smernice 2014/53/EÚ.

Kópia tohto Vyhlásenia o zhode EÚ je k dispozícii online na www.dji.com/euro-compliance

Kontaktná adresa v EÚ: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemecko

Deklaracja zgodności UE: Firma SZ DJI TECHNOLOGY CO., LTD. niniejszym oświadcza, że przedmiotowe urządzenie jest zgodne z

zasadniczymi wymogami i innymi stosownymi postanowieniami dyrektywy 2014/53/UE.

Kopię deklaracji zgodności UE można znaleźć w Internecie na stronie www.dji.com/euro-compliance

Adres do kontaktu w UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Niemcy

EU megfelelőségi nyilatkozat: A SZ DJI TECHNOLOGY CO., LTD. ezúton megerősíti, hogy ez az eszköz megfelel a 2014/53/EU Irányelv

alapvető követelményeinek és más vonatkozó rendelkezéseinek.

Az EU megfelelőségi nyilatkozat másolata elérhető a www.dji.com/euro-compliance oldalon

EU kapcsolati cím: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Németország

EU-försäkran om efterlevnad: SZ DJI TECHNOLOGY CO., LTD. härmed förklarar att denna enhet uppfyller de väsentliga kraven och andra

relevanta bestämmelser i direktivet 2014/53/EU.

En kopia av EU-försäkran om efterlevnad finns att tillgå online på adressen www.dji.com/euro-compliance

Kontaktadress EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland

Yfirlýsing um fylgni við reglur ESB: SZ DJI TECHNOLOGY CO., LTD. lýsir hér með yfir að þetta tæki hlíti mikilvægum kröfum og öðrum

viðeigandi ákvæðum tilskipunar 2014/53/ESB.

Nálgast má eintak af ESB-samræmisyfirlýsingunni á netinu á www.dji.com/euro-compliance

Heimilisfang ESB-tengiliðar: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

AB Uygunluk Beyanı: SZ DJI TECHNOLOGY CO., LTD. bu belge ile bu cihazın temel gerekliliklere ve 2014/53/EU sayılı Direktifin diğer ilgili

hükümlerine uygun olduğunu beyan eder.

AB Uygunluk Beyanının bir kopyasına www.dji.com/euro-compliance adresinden çevrim içi olarak ulaşılabilir

AB için iletişim adresi: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Almanya

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE

INSTRUCTIONS

Environmentally friendly disposal

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The

disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring

the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle

valuable raw materials and the treatment of toxic substances.



Umweltfreundliche Entsorgung

Elektro-Altgeräte dürfen nicht mit gewöhnlichem Abfall entsorgt werden und müssen separat entsorgt werden. Die Entsorgung an

kommunalen Sammelstellen ist für Privatpersonen kostenlos. Die Eigentümer der Altgeräte sind für den Transport zu den Sammelstellen

verantwortlich. Durch diesen geringen Aufwand können Sie zur Wiederverwertung von wertvollen Rohmaterialien beitragen und dafür

sorgen, dass umweltschädliche und giftige Substanzen ordnungsgemäß unschädlich gemacht werden.

Tratamiento de residuos responsable con el medio ambiente

Los aparatos eléctricos viejos no pueden desecharse junto con los residuos orgánicos, sino que deben ser desechados por separado. Existen

puntos limpios donde los ciudadanos pueden dejar estos aparatos gratis. El propietario de los aparatos viejos es responsable de llevarlos a

estos puntos limpios o similares puntos de recogida. Con este pequeño esfuerzo estás contribuyendo a reciclar valiosas materias primas y

al tratamiento de residuos tóxicos.

Mise au rebut écologique

Les appareils électriques usagés ne doivent pas être éliminés avec les déchets résiduels. Ils doivent être éliminés séparément. La mise au

rebut au point de collecte municipal par l'intermédiaire de particuliers est gratuite. Il incombe au propriétaire des appareils usagés de les

apporter à ces points de collecte ou à des points de collecte similaires. Avec ce petit effort personnel, vous contribuez au recyclage de

matières premières précieuses et au traitement des substances toxiques.

Smaltimento ecologico

I vecchi dispositivi elettrici non devono essere smaltiti insieme ai rifiuti residui, ma devono essere smaltiti separatamente. Lo smaltimento

da parte di soggetti privati presso i punti di raccolta pubblici è gratis. È responsabilità del proprietario dei vecchi dispositivi portarli presso

tali punti di raccolta o punti di raccolta analoghi. Grazie a questo piccolo impegno personale contribuirete al riciclo di materie prime preziose

e al corretto trattamento di sostanze tossiche.

Milieuvriendelijk afvoeren

Oude elektrische apparaten mogen niet worden weggegooid samen met het restafval, maar moeten afzonderlijk worden afgevoerd.

Afvoeren via het gemeentelijke inzamelpunt is gratis voor particulieren. De eigenaar van oude toestellen is verantwoordelijk voor het

inleveren van de apparaten op deze of vergelijkbare inzamelpunten. Met deze kleine persoonlijke inspanning lever je een bijdrage aan de

recycling van waardevolle grondstoffen en de verwerking van giftige stoffen.

Eliminação ecológica

Os aparelhos elétricos antigos não podem ser eliminados juntamente com os materiais residuais. Têm de ser eliminados separadamente.

A eliminação no ponto de recolha público através de entidades particulares é gratuita. É da responsabilidade do proprietário de aparelhos

antigos levá-los a estes pontos de recolha ou a pontos de recolha semelhantes. Com este pequeno esforço pessoal, contribui para a

reciclagem de matérias-primas úteis e para o tratamento de substâncias tóxicas.

Изхвърляне с оглед опазване на околната среда

Старите електрически уреди не трябва да се изхвърлят заедно с битовите отпадъци, а отделно. Изхвърлянето в общинския пункт за

събиране на отпадъци от частни лица е безплатно. Собственикът на старите уреди е отговорен за пренасянето на уредите до тези

или до подобни събирателни пунктове. С това малко собствено усилие допринасяте за рециклирането на ценни суровини и за

обработката на токсични вещества.

Ekologicky šetrná likvidace

Stará elektrická zařízení nesmějí být likvidována spolu se zbytkovým odpadem, ale musí být likvidována samostatně. Likvidace na

komunálních sběrných místech prostřednictvím soukromých osob je bezplatná. Vlastník starých zařízení odpovídá za to, že je donese do

těchto sběrných míst nebo na obdobná sběrná místa. Tímto můžete přispět k recyklaci hodnotných surovin a zpracování toxických látek.

Miljøvenlig bortskaffelse

Gamle elektriske apparater må ikke bortskaffes sammen med restaffald, men skal bortskaffes separat. Bortskaffelse på et fælles

indsamlingssted er gratis for privatpersoner. Ejere af gamle apparater er ansvarlige for at bringe apparater hen til disse indsamlingssteder

eller til lignende indsamlingssteder. Med denne lille personlige indsats bidrager du til genanvendelse af værdifulde råvarer og behandlingen

Οι παλιές ηλεκτρικές συσκευές δεν πρέπει να απορρίπτονται μαζί με τα υπολειμματικά απόβλητα, αλλά ξεχωριστά. Η απόρριψη στο

δημοτικό σημείο συλλογής μέσω ιδιωτών γίνεται χωρίς χρέωση. Ο κάτοχος παλιών συσκευών είναι υπεύθυνος για τη μεταφορά των

συσκευών σε αυτά ή παρόμοια σημεία συλλογής. Μέσω της ατομικής σας προσπάθειας, συμβάλλετε στην ανακύκλωση πολύτιμων

af giftige stoffer.

Απόρριψη φιλική προς το περιβάλλον

πρώτων υλών και την επεξεργασία των τοξικών ουσιών.

Keskkonnasäästlik kasutuselt kõrvaldamine

mürgiste ainete töötlemisele.

Utilizavimas nekenkiant aplinkai

Vanu elektriseadmeid ei tohi ära visata koos olmejäätmetega, vaid tuleb koguda ja kasutuselt kõrvaldada eraldi. Kohaliku omavalitsuse

elektroonikaromude kogumispunktis on äraandmine eraisikutele tasuta. Vanade seadmete sellistesse või sarnastesse kogumispunktidesse

toimetamise eest vastutavad seadmete omanikud. Selle väikese isikliku panusega aitate kaasa väärtusliku toorme ringlussevõtule ja

Senų elektrinių prietaisų negalima išmesti kartu su buitinėmis atliekomis; juos būtina utilizuoti atskirai. Tokių prietaisų utilizavimas per

komunalinius atliekų surinkimo punktus yra nemokamas. Elektrinių prietaisų savininkai utilizuojamus prietaisus privalo priduoti į

atitinkamus arba analogiškus atliekų surinkimo punktus. Tokiu būdu, įdėdami nedaug pastangų, prisidėsite prie vertingų medžiagų

perdirbimo ir aplinkos apsaugojimo nuo toksinių medžiagų.

Videi draudzīga atkritumu likvidēšana

Vecas elektriskās ierīces nedrīkst likvidēt kopā ar pārējiem atkritumiem, bet tās jālikvidē atsevišķi. Privātpersonām atkritumu likvidēšana

komunālajā savākšanas punktā ir bez maksas. Veco ierīču īpašnieks ir atbildīgs par ierīču nogādāšanu šajos savākšanas punktos vai līdzīgos



savākšanas punktos. Ar šīm nelielām personiskajām pūlēm jūs veicināt vērtīgu izejmateriālu pārstrādi un toksisko vielu apstrādi.

Hävittäminen ympäristöystävällisesti

Vanhoja sähkölaitteita ei saa hävittää kaatopaikkajätteen mukana, vaan ne on hävitettävä erikseen. Kunnalliseen keräyspisteeseen vieminen

on yksityishenkilölle ilmaista. Vanhojen laitteiden omistaja vastaa laitteiden toimittamisesta kyseisiin keräyspisteisiin tai vastaaviin. Tällä

vähäisellä henkilökohtaisella vaivalla edistät omalta osaltasi arvokkaiden raaka-aineiden kierrätystä ja myrkyllisten aineiden käsittelyä.

Diúscairt neamhdhíobhálach don chomhshaol

Níor cheart seanghléasanna leictreacha a dhiúscairt leis an dramhaíl iarmharach, ach caithfear iad a chur de láimh astu féin. Tá an diúscairt

ag an ionad bailiúcháin pobail ag daoine príobháideacha saor in aisce. Tá freagracht ar úinéir seanghléasanna na gléasanna a thabhairt

chuig na hionaid bhailiúcháin sin nó chuig ionaid bhailiúcháin den chineál céanna. Le hiarracht bheag phearsanta mar sin, cuidíonn tú le

hamhábhair luachmhara a athchúrsáil agus le substaintí tocsaineacha a chóireáil

L-apparat elettriku qadim ma għandux jintrema flimkien ma’ skart residwu, iżda għandu jintrema b’mod separat. Ir-rimi fil-post tal-ġbir

komunali minn persuni privati huwa b’xejn. Is-sit ta’ apparat qadim huwa responsabbli biex iġib l-apparat f’dawn il-postijiet tal-ġbir jew

f’postijiet tal-ġbir simili. B’dan l-isforz personali żgħir, inti tikkontribwixxi għar-riċiklaġġ ta’ materja prima prezzjuża u għat-trattament ta’

Rimi li jirrispetta l-ambjent

sustanzi tossiċi.

Eliminarea ecologică

Aparatele electrice vechi nu trebuie aruncate odată cu deșeurile reziduale, ci trebuie eliminate separat. Eliminarea în cadrul punctului de

colectare local de către persoane fizice este gratuită. Proprietarii de aparate vechi sunt responsabili pentru transportul acestora la

respectivele puncte de colectare sau la alte puncte de colectare similare. Prin acest efort personal nesemnificativ, puteți contribui la

reciclarea materiilor prime valoroase și la tratarea substanțelor toxice.

Okolju prijazno odlaganje

Starih električnih aparatov ne smete odvreči skupaj z ostanki odpadkov, temveč ločeno. Odlaganje na komunalnem zbirnem mestu je za

fizične osebe brezplačno. Lastnik starih naprav je odgovoren, da jih pripelje do teh ali podobnih zbirnih mest. S tako malo osebnega truda

prispevate k recikliranju dragocenih surovin in obdelavi strupenih snovi.

Stari električni uređaji ne smiju se odlagati zajedno s kućnim otpadom, već ih treba odlagati odvojeno. Odlaganje na komunalnom sabirnom

mjestu od strane privatnih osoba je besplatno. Vlasnik starih uređaja dužan je donijeti uređaje do tih sabirnih mjesta ili sličnih sabirnih

mjesta. Ovim malim osobnim naporom doprinosite recikliranju vrijednih sirovina i pravilnoj obradi otrovnih tvari.

Ekološko odlaganje

Ekologická likvidácia

Staré elektrospotrebiče sa nesmú likvidovať spolu so zvyškovým odpadom, ale musia sa zlikvidovať samostatne. Likvidácia v komunálnom

zbernom mieste prostredníctvom súkromných osôb je bezplatná. Majiteľ starých spotrebičov je zodpovedný za prinesenie spotrebičov na



tieto zberné miesta alebo na podobné zberné miesta. Týmto malým osobným úsilím prispievate k recyklovaniu cenných surovín

a spracovaniu toxických látok

Utylizacja przyjazna dla środowiska

postępowania z substancjami toksycznymi.

Környezetbarát hulladékkezelés

Nie można usuwać starych urządzeń elektrycznych wraz z pozostałymi odpadami. Wymagają one oddzielnej utylizacji. Utylizacja przez osoby

prywatne w punkcie zbiórki odpadów komunalnych jest darmowa. Właściciel starych urządzeń jest odpowiedzialny za dostarczenie ich do

takich lub podobnych punktów zbiórki. Zadając sobie tak niewielki trud, przyczyniasz się do recyklingu cennych surowców i odpowiedniego

A régi elektromos készülékeket nem szabad a nem szelektíven gyűjtött hulladékkal együtt kidobni, hanem a hulladékkezelésüket elkülönítve

kell végezni A közösségi gyűjtőpontokon a magánszemélyek ingyenesen leadhatják ezeket. A régi készülékek tulajdonosai felelnek azért,

hogy e készülékeket ezekre a gyűjtőpontokra, vagy más gyűjtőpontokra elhozzák. Ezzel a kis személyes erőfeszítéssel Ön is hozzájárul az

értékes nyersanyagok újrahasznosításához és a mérgező anyagok kezeléséhez.

Miljövänlig hantering av avfall

Gamla elektriska apparater får inte kasseras tillsammans med restavfallet utan måste kasseras separat. Kassering på den lokala

insamlingsplatsen för privatpersoner är gratis. Ägaren av gamla apparater ansvarar för att ta apparaterna till dessa insamlingsplatser eller

till liknande insamlingsplatser. Med denna lilla personliga insats bidrar du till återvinning av värdefulla råvaror och hantering av giftiga

ämnen.

Umhverfisvæn förgun

Çevre dostu bertaraf

bulunmuş olursunuz.

Ekki má farga gömlum raftækjum með úrgangsleifum, heldur þarf að farga þeim sérstaklega. Förgun á almennum söfnunarstöðum er ókeypis

fyrir einstaklinga. Eigandi gamalla tækja ber ábyrgð á að koma með tækin á þessa söfnunarstaði eða á svipaða söfnunarstaði. Með þessu

litla persónulega átaki stuðlar þú að endurvinnslu verðmætra hráefna og meðferð eitrurefna.

Eski elektrikli cihazlar, diğer atıklarla birlikte bertaraf edilmemeli, ayrıca atılmalıdır. Özel kişiler aracılığıyla genel toplama noktasına bertaraf

işlemi ücretsiz olarak yapılmaktadır. Eski cihazların sahibi, cihazları bu toplama noktalarına veya benzer toplama noktalarına getirmekten

sorumludur. Bu az miktardaki kişisel çabayla, değerli ham maddelerin geri dönüştürülmesine ve toksik maddelerin işleme alınmasına katkıda

This device is restricted to indoor use when operating in the 5150-5250MHz frequency range in all EU/EFTA member states and Turkey.

Im Frequenzbereich 5150 – 5250 MHz darf dieses Gerät in allen EU/EFTA-Mitgliedsstaaten und der

Türkei nur innerhalb von Gebäuden verwendet werden.

Este dispositivo está limitado a su uso en interiores cuando esté funcionando en el rango de frecuenciade 5150-5250 MHz en todos los

estados miembros de la UE/AELC y Turquía.

Cet appareil est réservé à un usage en intérieur dans une plage de fréquence de 5 150 à 5 250 MHz

dans tous les pays membres de l'Union Européenne et de l'Association européenne de libre-échange,ainsi qu'en Turquie.

Il presente dispositivo è limitato all'uso in ambienti interni se utilizzato nell'intervallo di frequenze difunzionamento 5150-5250 MHz in tutti

gli stati dell'UE/AELS e in Turchia.

Dit apparaat mag in landen van de EU/EFTA en Turkije alleen in binnenruimtes worden gebruikt

wanneer het frequentiebereik 5150-5250 MHz is ingesteld.

Este dispositivo está restrito para uso em áreas internas ao operar na faixa de frequência de 5150-5250MHz em todos os estados-membros

da UE/EFTA e Turquia.

входящих в ЕС/ЕАСТ, а также в Турции.

Использование данного устройства в частотном диапазоне 5150-5250 МГц разрешается только впомещениях во всех странах,

Thailand Warning message

เครื

่องโทรคมนาคมและอุปกรณ์นี

้ มีความสอดคล ้องตามข ้อก าหนดของ กทช.

Mexico Warning message

“La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia

perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.”



 

 

 

 

 

 

 

 

 

 

ci Omnidirectional Digital Radar FUT ASEOIMEERA IRA GB]

Manufactured by SZ DJI TECHNOLOGY CO., LTD. Address: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, China FCC ID: SS3-RD2424R CAN ICES-3(B)/NMB-3(B) IC:11805A-RD2424R Model:RD2424R

& R] XXX-XXXXXX [C..&

R-R-dji-RD2424R coxnmryyton 1 0 J :

IS C ANATEL XXXXX-XX-. XXX This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation Made In China Peis

 

 

Uji csM Radar Model:RD2424R FRUIT AOI EHR AIRS) Manufactured by SZ DJI TECHNOLOGY CO., LTD. Address: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, China FCC ID: SS3-RD2424R ;

IC:-11805A-RD2424R [G R-R-dji-RD2424R

@ a C =

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation Made In China Pais

 

 

Authority to Act as Agent Date: 2021-02-26 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern:

certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. specified by TUV Rheinland Group, still resides with SZ DIT TECHNOLOGY CO., LTD / 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong. Chi 5 : g g. nha For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. F urther, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: Permanent By : fos Wood fajia wang

. EE

(Signature) (Print Name) Title : Compliance Supervisor Telephone _ : +8675586152250

$e On behalf of : SZ DJI TECHNOLOGY CO., LTD eee

(Company Name) QF094234 Page 1 of 1 Revision 0

 

 

Confidentiality Letter Date: 26 Feb 2021 Subject: Confidentiality Request for FCC ID: SS3-RD2424R and IC: | 180S5A-RD2424R ;

Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested | Exhibit, stss~s~SCS

| (_] Short Term | Permanent | Block Diagrams Short Term | External Photos

| XX] Short Term [LJ Permanent | Internal Photos

[J Short Term

(_] Short Term Part List/Tune-Up Procedure Siow Ter | Bd) Permanent | Schematics

[x] Short Term fF Test Setup Photos

[BX Shoe Term | E]Pemmanent | User's Manual SZ DJI TECHNOLOGY CO., LTD has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-

1705. Sincerely, By: fajia wang a

(Signature/Title) (Print name)