all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
user manual part 1 | Users Manual | 4.55 MiB | November 09 2014 | |||
1 2 |
|
user manual part 2 | Users Manual | 2.64 MiB | November 09 2014 | |||
1 2 | Cover Letter(s) | November 09 2014 | ||||||
1 2 | Cover Letter(s) | November 09 2014 | ||||||
1 2 | External Photos | November 09 2014 | ||||||
1 2 | Internal Photos | November 09 2014 | ||||||
1 2 | Test Report | November 09 2014 | ||||||
1 2 | Test Setup Photos | November 09 2014 | ||||||
1 2 | ID Label/Location Info | November 09 2014 |
1 2 | user manual part 1 | Users Manual | 4.55 MiB | November 09 2014 |
Ronin V1.0 2014.07 User Manual Disclaimers and Warnings Congratulations on purchasing your new DJI product. Please read this manual and disclaimer carefully before using this product. By using this product, you hereby agree to this disclaimer and signify that you have read it in full. You agree that you are responsible for your own conduct and any content created while using this product, and for any consequence thereof. You agree to use this product only for purposes that are proper and in accordance with local regulations, terms and any applicable polices and guidelines. By reading this disclaimer, you also agree:
1. Any part of this disclaimer is subject to change without prior notice. Refer to www.dij.com for the latest version.
%+*SFTFSWFTUIFSJHIUPGmOBMJOUFSQSFUBUJPOPGUIJTEJTDMBJNFS
Do not modify or adjust the Ronin. The Ronin has been calibrated before it leaves the factory. No modifcation or amending to the Ronin is allowed. Make sure to use the original battery, otherwise performance may be hindered, and internal malfunctions and damage to the gimbal may be caused. Please download the corresponding Assistant softwares. As DJI has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. DJI assumes no liability for damage(s) or injuries incurred directly or indirectly from the use of this product. DJI and Ronin are registered trademarks of DJI as names of product, brand, etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies. This product and manual are copyrighted by DJI with all rights reserved. No part of this product or manual shall be reproduced in any form without the prior written consent or authorization of DJI. No patent liability is assumed with respect to the use of the product or information contained herein. Using Lithium Polymer (LiPo) Batteries LiPo smart batteries can be extremely hazardous and require special attention when handled. Always follow these instructions when using LiPo batteries:
1. DJI smart batteries must be charged with a DJI charger. 2. DJI smart batteries are designed to stop charging when full. However, it is good practice to monitor the charging progress and disconnect the battery from the charger once fully charged.
%POPUDIBSHFBTNBSUCBUUFSZOFBSnBNNBCMFNBUFSJBMTPSPOnBNNBCMFTVSGBDFTTVDIBTDBSQFUPSXPPE
4. Never charge a swollen, leaky or damaged battery. 5. Examine charger regularly for damage to the cord, plug, enclosure or other parts. Never use a damaged charger. 6. Disconnect the charger when not in use.
%POPUDMFBOUIFDIBSHFSXJUIEFOBUVSFEBMDPIPMPSPUIFSnBNNBCMFTPMWFOUT
Usage and Storage Keep batteries out of the reach of children and pets. Never discharge batteries below 3V per cell. Do not heat the battery. Do not insert or remove batteries if the plastic cover has been torn or compromised in any way. Do not drop or strike batteries. Never use a swollen, leaky or damaged battery. 2 2014 DJI. All Rights Reserved. Ronin User Manual Clean battery terminals with a clean, dry cloth. Do not expose batteries to extreme temperatures, including excessive heat. Do not leave the batteries inside vehicles on hot days. Do not allow batteries to come into contact with any kind of liquid. Do not leave batteries out in the rain or near a source of moisture. Do not leave batteries in a microwave oven or in a pressurized container. Do not attempt to dismantle, pierce or cut a battery. Do not attempt to repair batteries yourself. Do not place loose battery cells on any conductive surface, such as metal-toppled tables. Do not put the loose cells in a pocket, bag or drawer where they may short-circuit against other items or where battery terminals could be pressed against each other. Do not place or use batteries on strong electrostatic or electromagnetic surfaces or surrounding areas. This may result in battery damage. Do not place heavy objects on the batteries or charger. Avoid dropping batteries. Avoid direct contact with the electrolyte contained within the batteries. The electrolyte and electrolysis vapors are harmful to your health. Do not mix battery brands inside the controller. Do not attach the battery to wall or car charger sockets directly. Always use a DJI approved adapter. Battery Disposal Discarding batteries in general household waste is bad for the environment. Please dispose of batteries properly.
%POPUEJTQPTFPGCBUUFSJFTJOmSF
Damaged or unusable batteries must be disposed of in a container specially reserved for this purpose. When disposing of batteries, follow appropriate local guidelines and regulations. For further information, contact your local solid waste authority or a battery store. Only use the DJI smart battery. Always use the DJI smart battery charger. Using this manual Legend Important Hints and Tips 3FGFSFODFTPS%FmOJUJPOT Download DJI Ronin Assistant App Download and install the DJI Ronin Assistant App. Search "DJI Assistant" on the App Store and then follow the instructions for iOS installation. iOS6.1 or above 2014 DJI. All Rights Reserved. 3 Ronin V1.0 2014.07 User Manual Disclaimers and Warnings Congratulations on purchasing your new DJI product. Please read this manual and disclaimer carefully before using this product. By using this product, you hereby agree to this disclaimer and signify that you have read it in full. You agree that you are responsible for your own conduct and any content created while using this product, and for any consequence thereof. You agree to use this product only for purposes that are proper and in accordance with local regulations, terms and any applicable polices and guidelines. By reading this disclaimer, you also agree:
1. Any part of this disclaimer is subject to change without prior notice. Refer to www.dij.com for the latest version.
%+*SFTFSWFTUIFSJHIUPGmOBMJOUFSQSFUBUJPOPGUIJTEJTDMBJNFS
Do not modify or adjust the Ronin. The Ronin has been calibrated before it leaves the factory. No modifcation or amending to the Ronin is allowed. Make sure to use the original battery, otherwise performance may be hindered, and internal malfunctions and damage to the gimbal may be caused. Please download the corresponding Assistant softwares. As DJI has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. DJI assumes no liability for damage(s) or injuries incurred directly or indirectly from the use of this product. DJI and Ronin are registered trademarks of DJI as names of product, brand, etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies. This product and manual are copyrighted by DJI with all rights reserved. No part of this product or manual shall be reproduced in any form without the prior written consent or authorization of DJI. No patent liability is assumed with respect to the use of the product or information contained herein. Using Lithium Polymer (LiPo) Batteries LiPo smart batteries can be extremely hazardous and require special attention when handled. Always follow these instructions when using LiPo batteries:
1. DJI smart batteries must be charged with a DJI charger. 2. DJI smart batteries are designed to stop charging when full. However, it is good practice to monitor the charging progress and disconnect the battery from the charger once fully charged.
%POPUDIBSHFBTNBSUCBUUFSZOFBSnBNNBCMFNBUFSJBMTPSPOnBNNBCMFTVSGBDFTTVDIBTDBSQFUPSXPPE
4. Never charge a swollen, leaky or damaged battery. 5. Examine charger regularly for damage to the cord, plug, enclosure or other parts. Never use a damaged charger. 6. Disconnect the charger when not in use.
%POPUDMFBOUIFDIBSHFSXJUIEFOBUVSFEBMDPIPMPSPUIFSnBNNBCMFTPMWFOUT
Usage and Storage Keep batteries out of the reach of children and pets. Never discharge batteries below 3V per cell. Do not heat the battery. Do not insert or remove batteries if the plastic cover has been torn or compromised in any way. Do not drop or strike batteries. Never use a swollen, leaky or damaged battery. 2 2014 DJI. All Rights Reserved. Ronin User Manual Clean battery terminals with a clean, dry cloth. Do not expose batteries to extreme temperatures, including excessive heat. Do not leave the batteries inside vehicles on hot days. Do not allow batteries to come into contact with any kind of liquid. Do not leave batteries out in the rain or near a source of moisture. Do not leave batteries in a microwave oven or in a pressurized container. Do not attempt to dismantle, pierce or cut a battery. Do not attempt to repair batteries yourself. Do not place loose battery cells on any conductive surface, such as metal-toppled tables. Do not put the loose cells in a pocket, bag or drawer where they may short-circuit against other items or where battery terminals could be pressed against each other. Do not place or use batteries on strong electrostatic or electromagnetic surfaces or surrounding areas. This may result in battery damage. Do not place heavy objects on the batteries or charger. Avoid dropping batteries. Avoid direct contact with the electrolyte contained within the batteries. The electrolyte and electrolysis vapors are harmful to your health. Do not mix battery brands inside the controller. Do not attach the battery to wall or car charger sockets directly. Always use a DJI approved adapter. Battery Disposal Discarding batteries in general household waste is bad for the environment. Please dispose of batteries properly.
%POPUEJTQPTFPGCBUUFSJFTJOmSF
Damaged or unusable batteries must be disposed of in a container specially reserved for this purpose. When disposing of batteries, follow appropriate local guidelines and regulations. For further information, contact your local solid waste authority or a battery store. Only use the DJI smart battery. Always use the DJI smart battery charger. Using this manual Legend Important Hints and Tips 3FGFSFODFTPS%FmOJUJPOT Download DJI Ronin Assistant App Download and install the DJI Ronin Assistant App. Search "DJI Assistant" on the App Store and then follow the instructions for iOS installation. iOS6.1 or above 2014 DJI. All Rights Reserved. 3 Contents Disclaimers and Warnings Using Lithium Polymer (LiPo) Batteries Usage and Storage Battery Disposal Using this manual Legend Download DJI Ronin Assistant App Introduction Package & Instruction Sheet In the box Gimbal Description Getting Started Smart Battery Tuning Stand Installing the Handle Bar onto the Gimbal Smart Battery Installation Mounting the Camera Handle Bar Adjustment Balancing Step1: Balancing the Tilt Axis Step2: Balancing the Roll Axis Step3: Balancing the Vertical Tilt Step4: Balancing the Pan Axis Advanced Roll Adjustment DJI Ronin Assistant App Tuning Download and Install Basic Settings Advanced Settings DJI PC Assistant Tuning Install the DJI WIN driver and DJI PC Assistant Settings Remote Control Connecting the Remote Control to Ronin Remote Control Power LED Indicator Status Remote Control Features Adding 3rd Party Transmitter/Receiver Operation Modes Underslung Mode Upright Mode Briefcase Mode Maintenance Troubleshooting 6SHFLFDWLRQ
4 2014 DJI. All Rights Reserved. 2 2 2 3 3 3 3 5 5 6 8 8 8 10 11 12 12 14 14 15 15 15 16 16 17 17 17 18 23 23 23 28 28 29 29 30 30 30 31 31 31 32 33 I n t r o d u c t i o n
/
P a c k a g e
&
I n s t r u c t i o n S h e e t Introduction The DJI Ronin is the culmination of years of stabilization experience built into our most advanced camera stabilization platform to date. The technology built into the DJI Ronin allows a broad spectrum of cameras varying in size and weight to be mounted for class leading stabilization. Weve put years of passion and excitement into the Ronin, bringing world-class movement translation and stability to the professional cinematographers market. A brushless gimbal stabilization system is not simply three brushless motors moving on three axes. The motors work with position feedback and the IMU (Inertial Measurement Unit) to communicate with our custom 32-bit processor, which processes movement calculations in milliseconds. This equates to control and stability accuracy down to 0.02 degrees of translated movement, meaning your images are going to be perfectly still in all three axes of movement. There are three operation modes in the Ronin: underslung mode, upright mode and briefcase mode. Package & Instruction Sheet Air pressure may be built up during air transportation or during extreme barometric pressure changes. Loosen the pressure valve knob on the side of the case prior to transportation in these circumstances to prevent pressure build up. Pressure Valve Below is the layout of the items inside the case. Not every item in this sheet is provided by DJI. There are pre-cut slots for some additional accessories. For more information regarding what's included, please refer to the "In the box" section of this manual. INSTRUCTION SHEET UPPER LAYER LOWER LAYER Smart Battery Accessories Smart Battery Smart Battery Smart Battery Smart Battery Remote Control 2.4 GHz Adjustable Length Extension Rod Top Handle Bar Camera Mounting Plate Camera Mounting Plate Gimbal LCD Screen Accessories Camera Mounting Plate Accessories DJI Lightbridge Charger Tuning Stand 2014 DJI. All Rights Reserved. 5 In the box Gimbal 1 The gimbal includes built-in DJI motor drive modules, an independent IMU module, a 32-bit DSP processor, power supply module, Bluetooth, transmitter/receiver module, camera shelf, and power breakout box. I n t h e b o x Handle Bar 1 Customizable handle platform for the gimbal. Remote Control- 2.4 GHz 1 Controls the movements of the gimbal, switches the work modes, and selects gimbal speed. Tuning Stand 1 For suspending or storing the gimbal. Charger 1 110-240V automatic switching charger. Smart Battery 1 Power source for the gimbal. Also supplies power for other external devices. 6 2014 DJI. All Rights Reserved. Ronin User Manual I n t h e b o x Cables 3 ANSI & JIS & CE cables. Plug Adaptors 2 SAA & BS adaptors. Micro-USB Cable 1
'PSmSNXBSFVQHSBEFT
Camera Mounting Plate 1 For mounting your camera onto the gimbal. Extension Rod Holder 1 For installing extension accessories with the extension rods. Adjustable Length Extension Rod 6 For installing extension accessories with the extension rod holder. Accessories Package Camera Screw A (1/4) 2 Lens Support 1 Camera Screw B (3/8) 2 M4*10 Screw 2 Lens Support Screw 1 Top Bar Quick Release Accessories Mount x 2 Allen Wrench 3
(3mm, 4mm, & 3/16) 2014 DJI. All Rights Reserved. 7 i G m b a l D e s c r i p t i o n
/
G e t t i t n g S a r t e d Gimbal Description
[1]
[2]
[3]
[4]
[16]
[14]
[8]
[9]
[13]
[5]
[6]
[7]
[10]
[11]
[12]
[17] [18]
[15]
[19]
[20]
[21]
[1] Top Handle Bar
[2] Side Handle
[3] Quick Release Mount
[4] Pan Motor
[5] Pan Adjustment Slider
[6] D-BUS/PPM Receiver Port
[7] USB port & Can Bus Port
[8] Bind Button
[9] Gimbal LED Indicator light
[10] Smart Battery
[11] Roll Motor
[12] Tilt Motor
[13] Fore and Aft Adjustment
[14] Tilt Vertical Adjustment
[15] Roll Adjustment
[16] IMU
[17] P-TAP Accessory Power Port
[18] USB Accessory Power Port
[19] P-TAP Port (rear side)
[20] DJI Lightbridge Port (rear side)
[21] GCU (rear side) Getting Started Smart Battery
#FGPSFZPVTUBSUVTJOHZPVS3POJO CFTVSFUPDIBSHFUIFCBUUFSZmSTU5IFTNBSUCBUUFSZJTTQFDJBMMZ
designed for the Ronin. It has a battery capacity of 3400mAh, voltage of 14.8V, and power management functionality. Charge the smart battery only with DJI approved chargers. When the battery is fully charged, it has a maximum run time of 4 hours. Smart Battery Charger 8 2014 DJI. All Rights Reserved. Ronin User Manual DJI Smart Battery Functions Balance Charging Automatically balances the voltage of each battery cell during charging. Capacity Display Displays current battery levels. Overcharge Protection Charging stops automatically when the battery voltage reaches 16.8V to prevent overcharge damage. Over Discharge Protection Discharging stops automatically when battery voltage reaches 12V to prevent over discharge damage. Short Circuit Protection Automatically cuts power supply when a short circuit is detected. Sleep Protection Sleep mode is activated after 10 minutes of inactivity to save power. Charging Temperature Detection 5IFCBUUFSZXJMMDIBSHFPOMZXIFOUIFUFNQFSBUVSFJTCFUXFFO
BOE
G e t t i n g S t a r t e d
%DWWHU\6SHFLFDWLRQV Type Capacity Charging Environment Temperature Operating Environment Temperature LiPo 14.8V, 3400mAh 0C ~ 45C
-15C ~ 50C Charging/Discharging Environment Relative Humidity
<80%
Read the user manual, disclaimer, and battery warnings before use. Users take full responsibility for all operations and usage. Always use DJI approved chargers. DJI takes no responsibility for any use of non-DJI approved chargers. Charging the Smart Battery 1. Connect the charger to a wall socket (100-240V, 50/60Hz), using the plug set if necessary. 2. Connect the battery to the charger. 3. The battery level indicator lights display current capacity level as the battery charges. 4. The battery is fully charged when the battery level indicator lights shut off and the indicator light on the charger turns green. Disconnect the battery from the charger when charging is completed. Socket 2014 DJI. All Rights Reserved. 9 Ronin User Manual Using the Smart Battery
[1] [2] [3] [4] LED indicator lights
[5] Power Button
(with one LED battery power indicator.)
[6] Thumb Screws
[6]
[1]
[3]
[5]
[2]
[4]
Checking the battery level: When the battery is powered off, pressing the battery power button once will display the current battery level. Powering on: When the battery is powered off, press and hold for 1 second to turn on the smart battery. Powering off: When the battery is powered on, press and hold for 1 second to turn off the smart battery. G e t t i n g S t a r t e d Description of the Smart Battery Level Indicators The battery level indicators show the current battery level during both the charging and discharging process. The following is a description of the indicators.
: The LED is in a solid state on
:The LED is blinking
: The LED is off Discharging process LED1 LED2 LED3 LED4 Current battery level 87.5%~100%
75%~87.5%
62.5%~75%
50%~62.5%
37.5%~50%
25%~37.5%
12.5%~25%
0%~12.5%
<0%
Tuning Stand You can use the tuning stand during setup or for storage of the gimbal. The following steps show how to use the tuning stand. 1. Put the stand in the upright position as shown in the picture below.
1VUZPVSUIVNCPOUIFTJMWFSCVUUPO<>6TJOHZPVSJOEFYBOENJEEMFmOHFSCFIJOEUIFBSN QVMM
the lower legs outward away from the stand, and then pull downward. Then pull the upper arms outward and upward. 3. The upper half of this tuning stand can be removed by loosening the knob [3]. You can use it with BOZ$TUBOETUZMFTUVEUIBUmUTUIFIPMF<>8IFONPVOUJOHPOUPB$TUBOE CFTVSFUPDIFDLUIF
balance of the stand so as to not have the Ronin with a camera tilt over. When setting on a table, NBLFTVSFUIFUBCMFJTBnBUBOEFWFOTVSGBDF
10 2014 DJI. All Rights Reserved. Ronin User Manual
[3]
[4]
[2]
[1]
Installing the Handle Bar onto the Gimbal 1. The turn knobs on the handles are loose by default. Adjust the grips to the desired position and tighten the screws to secure their position. 2. Place the handle bar in the position as shown below. G e t t i n g S t a r t e d 3. Push the lock [1]downward on the pan motor, and slide the handle bar into the gimbal. Then tighten the lock-knob [2]. 4. With your hands on the handles, be sure the gimbal is not obstructed during a 360 degree pan. Installation is complete.
[2]
[1]
2014 DJI. All Rights Reserved. 11 Ronin User Manual Smart Battery Installation 1. Loosen the thumb screws on either side of the battery. Slide the battery directly into the gimbal and then slide down. Be sure the batterys thumb screws go down into their locating slots making full contact with the gimbals electrical leads. 2. Tighten the thumb screws on the battery to lock it in place. G e t t i n g S t a r t e d Make sure the battery is powered off during the installation. An incorrectly installed battery may lead to (1) Poor battery connection, or (2) Unavailable battery information. Mounting the Camera The Ronin uses an adjustable camera mounting plate to allow you to easily balance, install and remove your camera. The Ronin has been tested with the following types of cameras. Other cameras similar in size and weight may also work. Black Magic Cinema Camera Black Magic Pocket Cinema Camera Canon 1Dc Canon 5DMKII Canon 5DMKIII Canon 6D Canon 7D Canon C100 Canon C300 Canon C500 Nikon D800 Panasonic GH3 Panasonic GH4 RED Epic/Scarlet Sony NEX7 Camera Size Requirements: the maximum depth from the center of gravity on the camera base plate is 140mm; the maximum height measured from the top of the camera base plate is 225mm; and the maximum width is 195mm. To avoid obstructing camera movement, the use of soft connection cables is recommended. 1. Attach the camera mounting plate to your camera using the provided screws. Choose the correct 1/4" or 3/8" screws. Some cameras have two tripod mounting holes. Its best to secure the camera as tightly as possible. If two mounting holes are available on your camera, then use both mounting IPMFT$IPPTFUIFSJHIUTDSFXIPMFTBDDPSEJOHUPZPVSDBNFSBTDPOmHVSBUJPO
2. Install the extension rod holder and lens support. Gently push up to apply a little pressure to the lens, then tighten the thumbscrew. 12 2014 DJI. All Rights Reserved. Ronin User Manual Why do you need to use a lens support?
Certain cameras have a very tight lens securing system, and some cameras like the Canon 5D MKII and MKIII have very loose lens securing systems. The Ronin balances the camera as one solid unit. If the mounted camera has a loose camera securing system, the lens support must be used. This is because if a loose connection between the lens and the camera body is apparent, vibrations could travel through to the camera but not directly to the lens, resulting in the two masses shaking at different frequencies. The resulting oscillation will translate to the
*.6 DBVTJOHUIFXIPMFHJNCBMUPTIBLF*GUIFMFOTTVQQPSUmUT JUhTCFTUUPVTFJUBUBMMUJNFT
G e t t i n g S t a r t e d The lens support can be installed either facing outward or inward to accommodate different lens types. Ensure alignment of the camera plate and then tighten the screw prior to tightening the lens support. 3. If using follow focus or other accessories, insert the extension rod into the extension rod holder and UJHIUFO$POmHVSFUIFMFOHUIPGUIFSPETOFFETUPBDDPNPEBUFGPSUIFMFOHUIPGUIFMFOTVTFE
4. With the gimbal on the tuning stand facing outward, insert the camera until the safety lock is engaged. Make sure the gimbal is not turned on when balancing the camera. 5. Tighten the camera base side clamp. You can adjust the tightness of the side clamp with the M3 allen wrench. 2014 DJI. All Rights Reserved. 13
1 2 | user manual part 2 | Users Manual | 2.64 MiB | November 09 2014 |
DJI Ronin Assistant App Tuning
"GUFSmOJTIJOHUIFCBMBODJOHQPSUJPO ZPVDBOBEKVTUTPGUXBSFQBSBNFUFSTUISPVHIUIF%+*"TTJTUBOU"QQ
Download and Install 1. Download the DJI Assistant App:
Search DJI Assistant on the App Store then follow instructions for the iOS version. 2. Be sure Bluetooth is switched to the on postion on your mobile device. Position the camera in the standard operating position. Power on your Ronin and then open the app to connect to the Ronin via Bluetooth.
3FHJTUFSZPVSFNBJMBEESFTTXIFOVTJOHUIFBQQGPSUIFWFSZmSTUUJNF
4. Connect to your Ronin according to the tips in the app. After connecting to the main controller of the gimbal, you will see the Wizard menu. When the green light at the top in the App is steady and the blue light is blinking, the connection is complete. The green LED light on the Ronin will light up. There are two device types, choose "Ronin" to enter the gimbal assistant page. Choosing "A2"
XJMMFOUFSUIF%+*nJHIUDPOUSPMMFSBTTJTUBOUQBHF
Basic Settings The functionality in the Wizard are the most basic functions you may want to adjust upon receiving your Ronin. These options are also the most used functions during standard operation of the Ronin. You can complete all these settings in the Wizard menu. 1. Calibrate Auto Tune Stability provides an easy one-touch button for automatic configuration of each axis. 5SBKFDUPSZ TQFFE QPXFSBOETUJGGOFTTPGNPUPSTBSFBVUPNBUJDBMMZUVOFEGPSUIFDBNFSBDPOmHVSBUJPO
UIBUTNPVOUFE"VUP5VOF4UBCJMJUZTIPVMECFUBQQFEXIFOFWFSUIFSFJTBOFXDBNFSBDPOmHVSBUJPO
mounted such as a lens change or accessories change. This will offer the best stability and the most optimal settings. 2014 DJI. All Rights Reserved. 17 D J I i R o n n A s s s t a n i t A p p T u n n g i Ronin User Manual 2. Live Data This monitors the feedback from each motor axis. If a particular motor axis indicates a power greater than 10, this often means the mechanical balancing of the camera hasnt been properly adjusted. A properly balanced camera rig will have each axis indicating close to 0 power. Dont worry if these settings are not always 0. The Angle indicates the current angle at which each axis is in relation to center. 3. Briefcase Mode When Briefcase Mode is switched on, the Ronin will be able to seamlessly transform into this operation mode. With Briefcase Mode turned off, the Ronin will allow the Roll axis to follow if the Ronin is tilted past the standard roll axis travel. 4. SmoothTrack Mode When SmoothTrack Mode is enabled, the Ronin will can be "steered" by the camera operators movements in the Pan and Tilt axis. This steering/translation speed can be adjusted for each axis independently. When the Ronin's top bar is rotated left or right, the camera will smoothly pan and slow down to a stop. Under the SmoothTrack options, the Pan Axis and the Tilt Axis can be independently adjusted. Pan Axis speed will determine how fast the camera will travel while translating a pan movement. Pan Deadband will determine how much movement the gimbal will tolerate prior to translating the cameras pan. Tilt Axis speed will determine how fast the camera will travel while translating a tilt movement. Tilt deadband will determine how much movement the gimbal will tolerate prior to translating the cameras tilt. The Pan and Tilt SmoothTrack speed can be tested. Ensure there is no obstruction of the camera when tapping these Test buttons. 5. Control Speed Adjustment Remote control speed can be adjusted here. The adjustment represents the maximum speed of gimbal control in the Pan and Tilt axis when the control sticks are pushed to their endpoints. Advanced Settings There are more advanced functions you can adjust through the Assistant to meet your requirement. Gimbal Menu 18 2014 DJI. All Rights Reserved. Ronin User Manual 1. Gimbal Motor Adjustment The Auto Tune Stability button allows for automatic adjustment of each motors stiffness settings (as relayed from the sensors and how the Ronin sees each axiss interaction) to accomplish an optimized setting. Besides tuning stiffness, there are other electronic settings being tuned. It is highly recommended that the
"VUP5VOF4UBCJMJUZCVUUPOCFUBQQFEXIFOFWFSUIFSFJTBOFXDBNFSBDPOmHVSBUJPONPVOUFE JODMVEJOHB
lens change or accessories change. This will offer the best stability and the most optimal settings.
&BDIBYJTIBTJUTPXOTUJGGOFTTBOEUSJNBEKVTUNFOU5IFNPUPSTUJGGOFTTBEKVTUNFOUBMMPXTmOFUVOJOHPGUIF
amount of power applied to the motors as they react to the balancing of weight on each axis. The higher you can adjust the stiffness settings without having any vibrations or oscillations from the gimbal, the better. A majority of the time, the Auto Tuned settings will be suitable. The Trim adjustment controls the preset amount of trim applied to each axis off center. The default setting of 0 degrees represents center. 2. Gimbal SmoothTrack Mode When SmoothTrack Mode is enabled, the Ronin will can be "steered" by the camera operators movements in the Pan and Tilt axis. This steering/translation speed can be adjusted for each axis independently. When the Ronin's top bar is rotated left or right, the camera will smoothly pan and slow down to a stop. Under the SmoothTrack options, the Pan Axis and the Tilt Axis can be independently adjusted. Pan Axis speed will determine how fast the camera will travel while translating a pan movement. Pan Deadband will determine how much movement the gimbal will tolerate prior to translating the cameras pan. Tilt Axis speed will determine how fast the camera will travel while translating a tilt movement. Tilt deadband will determine how much movement the gimbal will tolerate prior to translating the cameras tilt. The Pan and Tilt SmoothTrack speed can be tested. Ensure there is no obstruction of the camera when tapping these Test buttons. Control Menu 2014 DJI. All Rights Reserved. 19 D J I i R o n n A s s s t a n i t A p p T u n n g i Ronin User Manual 1. Controller Deadband Onboard controller and the remote operator controller can have independent pan and tilt deadbands of movement. The larger the deadband, the more deadband there is in the stick movement prior to the input being translated to actual movement of the gimbal. 2. Controller Maximum Speed Maximum Speed is a function that allows the controlled stick response from being a linear response to what is known as an increasing response curve. This means the amount of gimbal travel in the Pan or Tilt is not directly proportional to control stick travel. Control response can be adjusted to be milder CFMPXUIFJOJUJBMmSTUIBMGPGDPOUSPMTUJDLUSBWFMBOECFJODSFBTFEUPBIJHIFSTQFFEUPXBSETUIFMBTU
half of control stick travel. This preset exponential curve is selected based off the input of maximum speed. The onboard controller and the remote operator control sticks can have maximum speeds set independently from each other. 3. Controller Smoothing When the control stick input is released, the smoothing of the translated movement will come to a smooth slow down if the smoothing is increased. If the smoothing is 0, the slowdown will appear as an abrupt stop. The onboard controller and remote operator control sticks can be set independently. Pan and tilt smoothing can also be set independently. 4. Controller Endpoints Adjustment Pan Axis endpoints can be adjusted independently for left and right movement when used with a remote control or the onboard controller. Pan Axis endpoints setting means during controller input, the maximum point in which the gimbal will rotate left or right. If the requirement to rotate 360 degrees on the Pan axis is needed, simply adjust the endpoints for pan to 0. If endpoints are set to 0 for 360 degree Pan ability, then "Test Pan Endpoint" will not move the pan axis. Tilt Axis endpoints can be adjusted independently for up and down movement when used with a remote control or the onboard controller. Tilt Axis endpoints setting means during controller input, the maximum point in which the gimbal will rotate up or down. The Pan and Tilt endpoints can be tested. Ensure there is no obstruction of the camera when tapping the Test buttons. 20 2014 DJI. All Rights Reserved. Ronin User Manual 5. Channels 5IJTJTBDIBOOFMJOEJDBUPSUPQSPWJEFGFFECBDLEVSJOHSFNPUFPQFSBUPSDPOmHVSBUJPO1BO 5JMU BOE
Roll can be re-assigned to either of the remote control sticks. The controlled axis can also be reversed. 6. Controller Settings Controller Priority: If both input devices send control signals to the gimbal, the selected controller priority will be the only device to send a signal at that given time. 1BO5JMUSFNPUFTQFFEBEKVTUNFOUTDBOCFQSFDPOmHVSFEUPCFTFMFDUBCMFPOUIFOEPQFSBUPSSFNPUF
control. The control speed settings for pan and tilt can be set independently from each other. Setting Speed Toggle Presets, you are setting the Function switch (left switch) on the Ronin remote control. These presets will allow you to change the SmoothTrack speed remotely. If the remote control is turned on, the Speed Toggle Presets for SmoothTrack will take precedence over the App settings. Once the remote control is turned off, the SmoothTrack settings in the App will take over. 2014 DJI. All Rights Reserved. 21 D J I i R o n n A s s s t a n i t A p p T u n n g i Ronin User Manual Viewer Menu The viewer provides all the essential live data for monitoring the gimbals electronics as well as feedback from the motors. Power is indicated for each axis. The current angle of each axis is also indicated. The voltage of the battery, temperature of the main electronics, and also current uptime can also be monitored via this menu. More Menu Briefcase Mode When Briefcase Mode is switched on, the Ronin will be able to seamlessly transform into this operational mode. With Briefcase Mode turned off, the Ronin will continue to allow the Roll axis to follow. Motor Kill Switch When activated, the Ronin is still powered on, but the motors will be powered off. This will allow an adjustment to the gimbal or camera without having to turn off the gimbal. Prior to turning off the kill switch, make sure the gimbal is positioned in the standard operating position. The motor kill switch can also be used in case the gimbal operator runs into an issue, or you need to make a quick mechanical adjustment to the gimbal or camera setup. Calibrate Center If the Ronins Pan axis is off center, you can recalibrate the true center of the Ronin using this switch. Using a remote control, position the pan axis at dead center, then tap the Calibrate Center. Tap Center BHBJOJOUIFQPQVQUPDPOmSN1PXFSDZDMFBGUFSDBMJCSBUJOHDFOUFS
Calibrate System Calibrate System is only used if you notice any kind of drift in any of the axes. To calibrate the system, place the Ronin on the tuning stand and make sure it is completely steady. Then tap the Calibrate System button BOEMFUUIFQSPDFTTmOJTICFGPSFQJDLJOHVQUIF3POJO
Restore Default Settings 5IJTXJMMSFTUPSFBMMUIFGBDUPSZTFUUJOHTUIBUBSFDPOmHVSBCMFUISPVHIUIFBQQ
22 2014 DJI. All Rights Reserved. DJI PC Assistant Tuning
:PVDBOBMTPUVOFUIF3POJOBOEVQHSBEFmSNXBSFUISPVHIUIF%+*1$"TTJTUBOU
The tuning abilities of the DJI Assistant App and DJI PC Assistant are the same. There is no need to repeat your settings in both Assistants. Install the DJI WIN driver and DJI PC Assistant 1. Download the DJI WIN DRIVER INSTALLER from the Ronin product page on DJI.com. 2. Download the appropriate Assistant installer from DJI.com.
%PVCMFDMJDLUIF"TTJTUBOUJOTUBMMFSBOEGPMMPXUIFTUFQTUPmOJTIUIFJOTUBMMBUJPO
4. Run Assistant.
6QHSBEFUIFmSNXBSFPSDPOmHVSFQBSBNFUFSTVTJOHUIF"TTJTUBOUBTOFFEFE
The Assistant installer can be used on Windows XP, Win7, and Win8 (32 or 64 bit) Settings Adjust the following basic functions before using the Ronin: Auto Tune Stability, Briefcase Mode, SmoothTrack and Maximum Speed Adjustment. 5IFEFmOJUJPOBOEGVODUJPOPGFWFSZCVUUPOJOUIF%+*"TTJTUBOU"QQBOE%+*1$"TTJTUBOUBSFUIFTBNF
refer to the DJI Assistant App for more details. Basic 1. Gimbal 2014 DJI. All Rights Reserved. 23 D J I P C A s s s t a n i t T u n n g i D J I P C A s s s t a n i t T u n n g i Motor: The Auto Tune Stability button allows for automatic adjustment of each motors stiffness settings
(as relayed from the sensors and how the Ronin sees each axiss interaction) to accomplish an optimized setting. Each axis has its own stiffness and trim adjustment. Live Data: This monitors the feedback from the motors on each axis. Briefcase Mode: Select the checkbox to enable Briefcase Mode. Motor Kill Switch: Select the checkbox to enable the Motor Kill Switch. SmoothTrack: Select the checkbox to enable SmoothTrack. Note the Pan Axis and the Tilt Axis can be independently adjusted. The Pan and Tilt SmoothTrack speed can be tested. Ensure there is no obstruction of the camera when clicking the Test buttons. Reset Password: If you forgot your Bluetooth connection password, click here to reset your password. Calibrate Center: If the Ronins Pan axis is off center, you can recalibrate the true center of the Ronin using this switch. Using a remote control, position the pan axis at dead center, then click the Calibrate Center. Click i$FOUFSwBHBJOJOUIFQPQVQUPDPOmSN0ODFDBMJCSBUFE QPXFSDZDMFGPSUIFOFXDFOUFSUPUBLFFGGFDU
Viewer Menu: The Viewer provides essential live data for monitoring the Ronins electronics and feedback from the motors. Power is indicated for each axis. The current angle of each axis is also indicated. Calibrate System: Calibrate System is only used if you notice any kind of drift in any of the axes. To calibrate the system, place the Ronin on the tuning stand and make sure it is completely steady. Then DMJDLUIF$BMJCSBUF4ZTUFNCVUUPOBOEMFUUIFQSPDFTTmOJTICFGPSFQJDLJOHVQUIF3POJO
Auto Tune Stability: The Auto Tune Stability button allows for automatic adjustment of each motors stiffness settings (as relayed from the sensors and how the Ronin sees each axiss interaction) to accomplish an optimized setting. Default: Click here to restore all of the factory settings. 2. Control The onboard controller and the remote operator control sticks have a Deadband, Maximum Speed, and Smoothing, all of which can be set independently. Endpoint: Pan Axis endpoints can be adjusted independently for left and right movement when used with a remote control or the onboard controller. Tilt Axis endpoints can be adjusted independently for up and down 24 2014 DJI. All Rights Reserved. Ronin User Manual movement when used with a remote control or the onboard controller. If the requirement to rotate 360 degrees on the Pan axis is needed, simply adjust the endpoints for pan to 0. If endpoints are set to 0 for 360 degree Pan ability, then "Test Pan Endpoint" will not move the pan axis. The Pan and Tilt endpoints can be tested. Ensure the camera is unobstructed when clicking the Test buttons. Controller Priority: If both input devices send control signals to the gimbal, the selected controller priority will be the only device to send a signal at that given time. Pan/Tilt Remote Speed Adjustment: Click to choose combined or independent settings. Speed Toggle Presets: These presets will allow you to change the SmoothTrack speed remotely. If the remote control is turned on, the Speed Toggle Presets for SmoothTrack will take precedence over the Assistant settings. Once the remote control is turned off, the SmoothTrack settings in the Assistant will take over. 3. Channels 5IJTJTBDIBOOFMJOEJDBUPSUPQSPWJEFGFFECBDLEVSJOHSFNPUFPQFSBUPSDPOmHVSBUJPO1BO 5JMU BOE
Roll can be re-assigned to either of the remote control sticks. The controlled axis can also be reversed. 4. Battery
*This page provides all of the essential information regarding the Ronins battery. 2014 DJI. All Rights Reserved. 25 D J I P C A s s s t a n i t T u n n g i D J I P C A s s s t a n i t T u n n g i Ronin User Manual Upgrade
:PVDBOWJFXUIFMBUFTUmSNXBSFWFSTJPOJOGPSNBUJPOPOUIJTQBHF6QHSBEFUIFmSNXBSFCZGPMMPXJOH
the steps below:
1. Connect the Ronin to your computer via the Micro-USB cable and wait until the blue indicator LED in the PC Assistant blinks. 2. Click Upgrade.
8BJUGPSUIFEPXOMPBEUPmOJTI
$MJDLi6QHSBEFwBHBJOBOEUIFODMJDLi$POmSNw
5. Power the Ronin off and on after the upgrade is complete. Ensure your computer is connected to the internet.
$MPTFBOZBOUJWJSVTQSPHSBNTBOEOFUXPSLmSFXBMMTEVSJOHUIFVQHSBEF
Ensure the Ronin is powered on during the upgrade. Do not disconnect the USB cable during the upgrade. Do not power off the Ronin until the upgrade is completed. 26 2014 DJI. All Rights Reserved. Info Ronin User Manual You can check the Assistant version via Info. S/N is a 32 digit authorization code for future function activations. The authorization code for your unit JTmMMFEJOBGUFSJUTCFFONBOVGBDUVSFE*OUIFGVUVSF ZPVNBZCFBTLFEUPmMMJOBOFX4/JGZPVSFRVJSF
GVODUJPOVQHSBEFT'JMMJOUIF4/BOEUIFODMJDLUIF8SJUFCVUUPO*GZPVmMMJOBOJOWBMJE4/NPSFUIBO
30 times, your GCU will be locked and you will have to contact our customer support. 2014 DJI. All Rights Reserved. 27 D J I P C A s s s t a n i t T u n n g i Remote Control J3 J4
[1]
[2]
[4]
[6]
[7]
[8]
[9]
[3]
[5]
J2 J1
[10]
[11]
[1] Antenna
[2] Carrying Handle
[3] 3-Position Switch MODE
[4] 3-Position Switch FUNCTION
[5] Joystick 1(J1;J2)
[6] Joystick 2(J3;J4)
[7] Neck Strap Attachment
[8] Power Switch
[9] Power Indicator
[10] Battery Compartment
[11] Micro-USB Port Connecting the Remote Control to Ronin 1. Insert four AA batteries into the battery compartment on the back of the remote control. Pay attention to the negative and positive poles. 2. Turn on the Ronin, then turn on the Remote Controllers's power switch. The LED on the Ronin will blink red at this time. 3. Press and hold the Bind button (shown below) for a few seconds until the LED blinks green three times. If the LED changes to a solid, red light, the remote control and the Ronin have been successfully bound. The binding process only needs to be done once unless the bind button is pressed or if the Ronin needs to be bound to another remote control. Bind Button Please make sure the batteries have enough capacity before use. If the low voltage warning alert sounds, please replace the batteries as soon as possible. Use the correct type of battery. For long-term storage, remove the batteries from the remote control. 28 2014 DJI. All Rights Reserved. t R e m o e C o n t r o l Ronin User Manual Remote Control Power LED Indicator Status Power LED Indicator Solid red Sound None Remote Control Status Normal
2VJDL3FEnBTIJOH B-B-B Low voltage alert. It will sound at 4V-4.3V. Replace the batteries immediately. 4MPX3FEnBTIJOH B--B--B Inactivity alert. Will sound after 15 minutes of inactivity. It will stop once you continue using the remote control or turn it off. The remote control will automatically power off when the battery voltage drops below 4V. Remote Control Features MODE: The MODE switch is used for toggling SmoothTrack. 1. In Position 1, SmoothTrack is off. Remote control will freely position pan axis stops and holds the last input position of the pan axis control stick. 2. In Position 2, SmoothTrack is on. Remote control will freely position pan axis stops and holds the last input position of the pan axis control stick. 3. In Position 3, SmoothTrack is on. The gimbal will always point and reset pan to the forward facing direction once the pan axis control stick is let go. t R e m o e C o n t r o l Position 1 Position 2 Position 3
-Free, SmoothTrack Off
-Free, SmoothTrack On
-Reset to Center, SmoothTrack On FUNCTION: 1. The FUNCTION switch is used to select the SmoothTrack speed. There are 3 possible selections: Fast, Normal and Slow. The value of each speed can be preset in the App or PC Assistant. Position 1
-Fast Position 2
-Normal Position 3
-Slow 2. Activating Kill Switch. 2VJDLMZnJQUIF'6/$5*0/TXJUDICFUXFFO1PTJUJPOBOE1PTJUJPO
3 consecutively for 3 times and you will activate the motor kill switch. Do the same again to turn off the motor kill switch. Prior to re-activating the gimbal motors, be sure to position the camera in the standard operating position. The motor kill switch is useful in case the gimbal operator runs into an issue or you need to make a quick mechanical adjustment to the gimbal or camera setup. 2014 DJI. All Rights Reserved. 29 Ronin User Manual Left Stick: Horizontal movements on the left stick control the Roll axis. Vertical NPWFNFOUTIBWFOPEFmOJUJPO
Right Stick: Horizontal movements ont the right stick control the Pan axis. Right Stick:Vertical movements on the right stick control the Tilt axis. These stick settings can be customized in the DJI Ronin Assistant App or PC Assistant. Adding 3rd Party Transmitter/Receiver Ronin supports 3rd party transmitters/receivers, such as D-Bus or PPM. Connect the transmitter through the port (refer to Page 8 for the location of D-Bus/PPM port ). Operation Modes There are three operation modes in the Ronin: underslung mode, upright mode and briefcase mode. Underslung Mode Underslung mode is the standard, default mode. It can be used without any user input. 30 2014 DJI. All Rights Reserved. O p e r a t i o n M o d e s Ronin User Manual Upright Mode Flip the gimbal forward 180 degrees and it will automatically change to upright mode. Alternatively, you can set the gimbal into upright mode before turning it on. Upright mode is ideal for car mounts or other high camera positions, as it allows you to shoot higher and/or at eye level. Upright mode can CFVTFEXJUIPVUBOZVTFSJOQVU%POPUnJQUIFHJNCBMPWFSTJEFXBZTHPJOHMFGUPSSJHIUUPDPOWFSUUP
upright mode. Briefcase Mode Briefcase mode allows you to hold the Ronin in a slim profile close to your body. To enter briefcase mode, tilt the gimbal on the roll axis 90 degrees to the left or right. You may turn briefcase mode off in the gimbal app, in which case the Ronin will never automatically transform into briefcase mode. In briefcase mode, the remote control does not have pan or roll control of the Ronin. Upright Mode Briefcase Mode Maintenance The figure to the right shows the proper way to transport the Ronin with the stand. Using the hook-
and-loop straps, lock the Ronin gimbal in place as shown. Be sure to undo the straps prior to turning the Ronin on!
The Ronin is a precise machine and it is not water resistant. Keep it away from sand and dust during usage. After use, it is recommended to wipe the Ronin down with a soft dry cloth. Never spray any cleaning liquids onto the Ronin. 2014 DJI. All Rights Reserved. 31 i t M a n e n a n c e Troubleshooting NO. The Problem What to Do 1 Motors appear to be weak If after tapping the Auto Tune Stability button and the gimbal is still vibrating After camera balancing, launch the Assistant App or the PC Assistant and start the Auto Tune Stability. Wait for the process to complete and the stiffness settings will be populated on the screen.
(1) Check to make sure all knobs are very tight. Including the pan motor knob.
(2) Check to make sure the camera securing screw is tight. Push on the camera plate to make sure it is not loose and sliding in the camera mount.
(3) Try decreasing the stiffness of the each axis. You should be able to tell if there is one particular axis being affected by looking at the "power" of the axes. Pan axis seems off center Go into the Assistant App or PC Assistant, tap/click the Calibrate Center and follow the on-screen instructions. Ronin seems to be drifting Place the Ronin on the tuning stand and in the Assistant App or the PC Assistant, tap/click the Calibrate System button. Let the process complete before picking up the Ronin. SmoothTrack doesnt work
(1) Turn on the Remote control and be sure the MODE switch is not at Position 1 (the uppermost position).
(2) SmoothTrack is turned off in the Assistant App or the PC Assistant software.
(3) the SmoothTrack Deadband is turned up too high. Reduce the Deadband size in the SmoothTrack Menu. Motors seem to shutoff automatically Check your camera balance. If the power indicated in the Gimbal Motors Menu indicates 10 or more on any of the 3 axes, please rebalance your camera. Gimbal shuts off and doesnt come back on Power cycle the gimbal. This is a motor protection algorithm thats built into the Ronin to save its own electronic components. If any particular motor goes into a self protection mode (motor shuts off) 6 times within a 1 minute period, the Ronin will shut off power to the motors and will not come back to life unless power cycled. Forgot the Bluetooth password Connect Ronin to the PC Assistant and click the "Reset Password" button to reset your password. Footage appears to wobble side to side or up and down SmoothTrack speed is too high or SmoothTrack deadband is too low. Decrease the SmoothTrack speed or increase the deadband. 2 3 4 5 6 7 8 9 l T r o u b e s h o o t i n g 32 2014 DJI. All Rights Reserved. 6SHFLFDWLRQ General Built-In Functions Peripheral Camera Tray Dimensions Three Operation Modes Underslung Mode Upright Mode Briefcase Mode Built-in independent IMU module DJI Specialized Gimbal Drive Motors with Encoders Bluetooth Module USB Connection 2.4GHz Receiver Temperature Sensor DJI Advanced 32-Bit DSP Processor D-Bus/PPM Receiver Supported Maximum depth at center of mass on camera base plate: 140mm Maximum height measured from top of camera base plate:
225mm Maximum width: 195mm Accessory Power Connections 12V regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1 GCU Input Power 4S Ronin Battery Connections 2.4GHz Remote Control, Bluetooth, USB PC Assistant Software Requirements Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit) Mobile Assistant Software Requirements iOS version 6.1 or above. Mobile devices: iPhone 4s, iPhone 5, iPhone 5s, iPod touch 4, iPod touch 5 , iPad 3, iPad 4, iPad mini Mechanical & Electrical Characteristics Working Current Static current: 300mA (@16V) Dynamic current: 600mA (@16V) Locked motor current: Max 10A (@16V) Operating Temperature
-15C ~ 50C (-5F ~ 120F) Weight 4.20kg (9.26lbs) fully loaded with handlebar Gimbal Dimensions 620mm(W) x 280-380mm (D) x 500mm(H) Working Performance Load Weight Capacity
(Reference Value) 7.25kg (16lbs) Control Angle Accuracy 0.02 Maximum Control Rotation Speed Pan axis: 90/sec Tilt axis: 100/sec Roll axis: 30/sec Control Rotation Range Pan axis control: 360 Tilt axis control: Up 45 to Down 120 Roll axis control: 25 2014 DJI. All Rights Reserved. 33 4 Q F D m D B J U J P O FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Power is so low that no RF exposure calculation is needed.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-09-11 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
2 | JBP - Part 15 Class B Computing Device Peripheral |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2014-09-11
|
||||
1 2 | Applicant's complete, legal business name |
SZ DJI TECHNOLOGY CO., LTD
|
||||
1 2 | FCC Registration Number (FRN) |
0022596753
|
||||
1 2 | Physical Address |
14th floor, West Wing, Skyworth Semiconductor
|
||||
1 2 |
Nanshan, Shenzhen, Guangdong, N/A 518057
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
t******@metlabs.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
SS3
|
||||
1 2 | Equipment Product Code |
HG9001407
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
X******** X********
|
||||
1 2 | Title |
PM
|
||||
1 2 | Telephone Number |
+8675********
|
||||
1 2 | Fax Number |
+86 7********
|
||||
1 2 |
c******@dji.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Shenzhen Morlab Communications Technology Co.,Ltd
|
||||
1 2 | Name |
I****** Z****
|
||||
1 2 | Physical Address |
FL.3, Building A, FeiYang Science Park
|
||||
1 2 |
ShenZhen, GuangDong Province, 518055
|
|||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86-75********
|
||||
1 2 | Fax Number |
86-75********
|
||||
1 2 |
I******@morlab.cn
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | RONIN | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Shenzhen Morlab Communications Technology Co., Ltd
|
||||
1 2 | Name |
I******** z******
|
||||
1 2 | Telephone Number |
86755********
|
||||
1 2 | Fax Number |
86-75********
|
||||
1 2 |
i******@morlab.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0023000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | CC |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC