all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual Part 1 | Users Manual | 5.53 MiB | ||||
1 2 |
|
User Manual Part 2 | Users Manual | 1.64 MiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Test Report |
1 2 | User Manual Part 1 | Users Manual | 5.53 MiB |
RONIN-M User Manual V1.4 2015.8 Disclaimers and Warnings Congratulations on purchasing your new DJI product. Please read this manual and disclaimer carefully before using this product. By using this product, you hereby agree to this disclaimer and signify that you have read it fully. You agree that you are responsible for your own conduct and any content created while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with local regulations, terms and any applicable policies and guidelines. By reading this disclaimer, you also agree:
1. Any part of this disclaimer is subject to change without prior notice, refer to www.dji.com for the latest version.
%+*SFTFSWFTUIFSJHIUPGmOBMJOUFSQSFUBUJPOPGUIJTEJTDMBJNFS
Do not modify or adjust the Ronin-M. The Ronin-M has been calibrated before it leaves the factory. No adjusting or amending to the Ronin-M is allowed. Make sure to use the original battery, otherwise performance may be hindered, and internal malfunctions and damage to the gimbal may be caused. Please download the corresponding Assistant software. As DJI has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed or accepted for any resulting damage or injury. By the using, setting up, or assembling of the product, the user accepts all resulting liability. DJI assumes no liability for damages or injuries incurred directly or indirectly from the use of this product. DJI and Ronin-M are registered trademarks of DJI. All names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies. This product and manual are copyrighted by DJI, with all rights reserved. No part of this product or manual shall be reproduced in any form without the prior written consent or authorization of DJI. No patent liability is assumed with respect to the use of the product or information contained herein. FCC Compliance Ronin-M complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device accepts any interference received, including interference that may cause undesired operation. Required Notices to Use in Taiwan This device has been granted a designation number by the National Communications Commission
/$$
BDDPSEJOHUPUIF5FDIOJDBM3FHVMBUJPOT$POGPSNJUZ$FSUJmDBUJPOPG4QFDJmFE3BEJP&RVJQNFOU
"SUJDMF$FSUJmFECZUIFUZQFPGMPXQPXFSSBEJPGSFRVFODZFMFDUSPOJDT OPOMJDFOTFE DPNQBOZPS
users are not allowed to change to frequency, increase the power or change the characteristics of the original design and function. Article 14 The use of low-power radio-frequency electronics shall not affect aviation safety and interfere with legal communications. 2 2015 DJI. All Rights Reserved. Using the Manual Legend Important Hints and Tips 3FGFSFODFTPS%FmOJUJPOT Download the DJI Ronin-M Assistant App Download and install the DJI Assistant app. Search for "DJI Assistant" on the App Store and then follow the instructions for iOS installation. Search "DJI Ronin" on the Google Play and then follow the instructions for Android installation. J04PSBCPWF Android 4.3 or above http://m.dji.net/dji-ronin 2015 DJI. All Rights Reserved. 3 Contents Disclaimers and Warnings FCC Compliance Required Notices to Use in Taiwan Using the Manual Legend Download the DJI Ronin-M Assistant App Introduction In the Box Ronin-M Diagram Getting Started
%+**OUFMMJHFOU#BUUFSZ
5VOJOH4UBOE
Assembling the Handle Bar Installing the Handle Bar onto the Gimbal DJI Intelligent Battery Installation Mounting the Camera
$POmHVSJOHUIF)BOEMF#BS
Balancing 4UFQ#BMBODJOHUIF7FSUJDBM5JMU
4UFQ#BMBODJOHUIF3PMM"YJT
4UFQ#BMBODJOHUIF5JMU"YJT
4UFQ#BMBODJOHUIF1BO"YJT
Advanced Roll Adjustment DJI Ronin-M Assistant App Tuning Download and Install
#BTJD4FUUJOHT
"EWBODFE4FUUJOHT
DJI PC / MAC Assistant Tuning Install DJI PC / MAC Assistant 4FUUJOHT
Remote Control Connecting the Remote Control to the Ronin-M 3FNPUF$POUSPM1PXFS-&%*OEJDBUPS4UBUVT
3FNPUF$POUSPM#BUUFSZ-FWFM*OEJDBUPS4UBUVT
Remote Control Features Adding a Third-Party Transmitter/Receiver Operation Modes Underslung Mode Upright Mode Briefcase Mode Maintenance Troubleshooting 6SHFLFDWLRQV
4 2015 DJI. All Rights Reserved. 2 2 2 3 3 3 5 5 7 7
10 10 10 11
13
15 16 16
22 22
28 28
30 31 31 31 31 32 32 33
*
O U S P E V D U J P O
*
O
U I F
#
P Y Introduction
%FWFMPQFEGPSmMNNBLJOHQSPGFTTJPOBMT UIF%+*3POJO.NBSLTBHFOFSBUJPOBMMFBQGPSXBSEJODBNFSB
stabilization technology. The technology built into the DJI Ronin-M allows a broad spectrum of cameras, PGWBSZJOHTJ[FTBOEXFJHIUT UPCFTUBCJMJ[FEEVSJOHmMNJOH#BTFEPOUIFTVDDFTTGVMEFTJHOPGUIF%+*
Ronin Handheld Gimbal, the DJI Ronin-M is lighter, smaller, and more convenient to use.
"CSVTIMFTTHJNCBMTUBCJMJ[BUJPOTZTUFNJTOPUTJNQMZUISFFCSVTIMFTTNPUPSTNPWJOHPOUISFFBYFT5IF
motors work with position feedback and the IMU (Inertial Measurement Unit) to communicate with DJIs custom 32-bit processor, which processes movement calculations in milliseconds. This reduces angular WJCSBUJPOUPMFTTUIBOPGUSBOTMBUFENPWFNFOU NFBOJOHUIBUUIFDBNFSBXJMMSFNBJOQFSGFDUMZ
steady. The Ronin-M can be used in three different operation modes: Underslung Mode, Upright Mode, and Briefcase Mode. In the Box Gimbal 1 The gimbal includes built-in DJI motor drive modules, an JOEFQFOEFOU*.6NPEVMF BCJU%41QSPDFTTPS BQPXFS
supply module, a Bluetooth module, a transmitter/receiver NPEVMF BDBNFSBTIFMG BOEBQPXFSCSFBLPVUCPY
Handle Bar 1 Customizable handle bar for the gimbal. The handle bar is assembled from five parts, including a top handle, two handle bars and two grips. 5HPRWH&RQWURO*+]
Control the gimbals movements, switch work modes, and select gimbal speed. Tuning Stand 1 For suspending or storing the gimbal. 2015 DJI. All Rights Reserved. 5 Ronin-M User Manual Charger 1 Automatic switching charger 110-240V DJI Intelligent Battery 2 Power source for the gimbal. 4VQQMJFTQPXFSGPSPUIFSFYUFSOBMEFWJDFT
Cable Pack 1
"/4*DBCMF
+*4PS$&DBCMF WBSJFTCZSFHJPO Micro-USB Cable1
'PSmSNXBSFVQHSBEFT
Camera Mounting Plate 1 For mounting your camera onto the gimbal. Accessories Package
$BNFSB4DSFX" hh
$BNFSB4DSFX# hh
$BNFSB4DSFX$ hh
$BNFSB4DSFX% hh
-FOT4VQQPSU4DSFX
-FOT4VQQPSU
"MMFO8SFODI NNw 6 2015 DJI. All Rights Reserved. J
3 P O O
.
%
B H S B N J
(
F U U J U
O H 4 B S U F E Ronin-M Diagram
[2]
[1]
[3]
[4]
[8]
[]
[13]
[5]
[6]
[]
[10]
[11]
[12]
[16]
[14]
[] [18]
[15]
[1] Top Handle Bar
<> 4JEF)BOEMF
[3] Quick Release Mount
[4] Pan Motor
<> 1BO"EKVTUNFOU4MJEFS
<> %#643FDFJWFS1PSU
<> 64#1PSU$"/#VT1PSU
[8] Bind Button
<> (JNCBM-&%*OEJDBUPS-JHIU
[10] DJI Intelligent Battery
[11] Roll Motor
[]
[20]
[21]
[12] Tilt Motor
[13] Fore and Aft Adjustment
[14] Tilt Vertical Adjustment
[15] Roll Adjustment
[16] IMU Port
<> 15"1"DDFTTPSZ1PXFS1PSU
<> 64#"DDFTTPSZ1PXFS1PSU
<> 15"11PSU SFBSTJEF
[20] DJI Lightbridge Port (rear side)
[21] GCU Port (rear side) Getting Started DJI Intelligent Battery Before you start using your Ronin-M, be sure to charge the battery. The DJI Intelligent Battery was specially designed for the Ronin-M. It has a capacity of 1580mAh, a voltage of 14.4V, and a variety of QPXFSNBOBHFNFOUGVODUJPOT0OMZDIBSHFUIF%+**OUFMMJHFOU#BUUFSZXJUI%+*BQQSPWFEDIBSHFS .0%&-
#$
8IFOUIF%+**OUFMMJHFOU#BUUFSZJTGVMMZDIBSHFE UIF3POJO.IBTBNBYJNVNSVOUJNFPG
three hours. DJI Intelligent Battery Charger 2015 DJI. All Rights Reserved. 7 Ronin-M User Manual DJI Intelligent Battery Functions Balanced Charging Automatically balances the voltage of each battery cell during charging Capacity Display Displays current battery levels Overcharge Protection Charging stops automatically when the battery voltage reaches 16.8V, preventing overcharge damage Over-Discharge Protection Discharging stops automatically when battery voltage reaches 12V, preventing over-discharge damage 4IPSU$JSDVJU1SPUFDUJPO Automatically cuts power supply when a short circuit is detected 4MFFQ1SPUFDUJPO 4MFFQNPEFJTBDUJWBUFEBGUFSNJOVUFTPGJOBDUJWJUZ TBWJOHQPXFS Charging Temperature Detection 5IFCBUUFSZXJMMDIBSHFPOMZXIFOUIFUFNQFSBUVSFJTCFUXFFOBOE
$
(
F U U J O H 4 U B S U F E
'-,,QWHOOLJHQW%DWWHU\6SHFLFDWLRQV Type Capacity
$IBSHJOH&OWJSPONFOU5FNQFSBUVSF 0QFSBUJOH&OWJSPONFOU5FNQFSBUVSF LiPo 14.4V, 1580mAh
_
_
$IBSHJOH%JTDIBSHJOH&OWJSPONFOU3FMBUJWF)VNJEJUZ 80%
Read the user manual, disclaimer, and battery safety guidelines before use. Users take full responsibility for all operations and usage. Always use DJI approved chargers. DJI takes no responsibility for any consequences resulting from the use of non-DJI approved chargers. Charging the DJI Intelligent Battery 1. Connect the charger to a wall socket (100-240V, 50/60Hz). 2. Connect the DJI Intelligent Battery to the charger. 3. The battery level indicator lights display the current charge level as the DJI Intelligent Battery charges. 4. The DJI Intelligent Battery is fully charged when the battery level indicator lights turn off. Disconnect the battery from the charger when charging is complete. 8 2015 DJI. All Rights Reserved. 4PDLFU Ronin-M User Manual Using the DJI Intelligent Battery
[1]
[3]
[2]
[1] Battery Level Indicators
<> 1PXFS#VUUPO XJUI-&%JOEJDBUPS
<> 5IVNC4DSFXT
Checking the battery level: When the DJI Intelligent Battery is turned off, pressing the battery power button once will display the current battery level. Powering on: When the DJI Intelligent Battery is turned off, press and hold the power button for 1 second to turn on the DJI Intelligent Battery. Powering off: When the DJI Intelligent Battery is turned on, press and hold the power button for 1 second to turn off the DJI Intelligent Battery.
(
F U U J O H 4 U B S U F E
Tuning Stand You can use the tuning stand during setup, or to store the gimbal. The following steps show how to use the tuning stand. 1. Hold the stand in the upright position as shown in the picture below. 2. Press the buttons [1] on the outsides of the lower legs and rotate the legs downwards, away from the stand. Then press the buttons [2] on the outsides of the upper support arms and pull them upwards, BXBZGSPNUIFTUBOE1SFTTUIFCVUUPO<>POUIFWFSUJDBMTVQQPSUBOETMJEFJUVQUPFYUFOEUIFTUBOE
as shown. 3. The upper half of this tuning stand can be removed by loosening the knob on the rear of the stand [4].
:PVDBOVTFJUXJUIBOZ$TUBOETUZMFTUVEUIBUmUTJOUPUIFIPMF<>XIFSFUIFTVQQPSUBSNTDPOWFSHF
When mounting this section to a C-stand, always be sure to check the balance of the stand so that UIF3POJO. JGJUJTmUUFEXJUIBDBNFSB EPFTOPUUJQPWFS8IFOTFUUJOHPOBUBCMF NBLFTVSFUIF
UBCMFJTnBUBOEMFWFM
[3]
[2]
[1]
[4]
[5]
2015 DJI. All Rights Reserved. 9 Ronin-M User Manual Assembling the Handle Bar 1. Attach the handle bars to both sides of the top handle and tighten the grip screws. 2. Attach the grips to the handle bar and lock them in the preferred position.
(
F U U J O H 4 U B S U F E
Installing the Handle Bar onto the Gimbal 1. Place the handle bar in position, as shown below, then slide it horizontally into the gimbal and tighten the lock-knob. 2. Holding the gimbal by the grips, make sure that the gimbal is not obstructed during a 360 degrees pan. The installation is complete. DJI Intelligent Battery Installation
-PPTFOUIFTDSFXTPOFJUIFSTJEFPGUIF%+**OUFMMJHFOU#BUUFSZ4MJEFUIF%+**OUFMMJHFOU#BUUFSZ
EJSFDUMZJOUPUIFHJNCBMBOEUIFOTMJEFJUEPXO#FTVSFUIFCBUUFSZTUIVNCTDSFXTHPmUJOUPUIFJS
locating slots, so that the DJI Intelligent Battery makes full contact with the gimbals electrical leads. 2. Tighten the screws on the DJI Intelligent Battery to lock it in place. 10 2015 DJI. All Rights Reserved. Ronin-M User Manual Make sure the DJI Intelligent Battery is turned off during installation. An incorrectly installed battery may lead to (1) Poor battery connection, or (2) Unavailable battery information. Mounting the Camera The Ronin-M uses an adjustable camera mounting plate that allows you to easily balance, install, and remove the camera. The Ronin-M has been tested with the following types of cameras. Other cameras similar in size and weight may also be compatible. Black Magic Cinema Camera Black Magic Pocket Cinema Camera Canon 1Dc Canon 5DMKII Canon 5DMKIII Canon 6D
$BOPO%
Canon C100 Nikon D800 Panasonic GH3 Panasonic GH4 4POZ"MQIB
(
F U U J O H 4 U B S U F E
$BNFSB 4J[F3FRVJSFNFOUT5IFNBYJNVN
depth from the center of gravity on the camera CBTFQMBUFJTNN5IFNBYJNVNIFJHIU
measured from the top of the camera base plate, JTNN5IFNBYJNVNXJEUIJTNNBT
shown in the image to the right. To avoid obstructing camera movement, the use of soft connection cables is recommended. m m m m 0 0 4 2 1 1 160mm m m 5 9 1 1. Attach the camera mounting plate to your camera using the provided camera screws A, B, C or
%$BNFSBTDSFXT"BOE#POMZmUUIFIPMFTPGUIFNPVOUJOHQMBUF XIJMFDBNFSBTDSFXT$BOE
%POMZmUUIFTMPUPGUIFNPVOUJOHQMBUF#FTVSFUPVTFUIFDPSSFDUPSTDSFXT4FDVSFUIF
DBNFSBBTmSNMZBTQPTTJCMF4PNFDBNFSBTIBWFUXPUSJQPENPVOUJOHIPMFT*GUXPNPVOUJOH
holes are available on your camera, use them both. Choose the correct screw holes, according UPZPVSDBNFSBTDPOmHVSBUJPO
2. Install the lens support by gently pushing it up, so that it is applying light pressure to the lens. Then tighten the thumbscrew. 2015 DJI. All Rights Reserved. 11 Ronin-M User Manual Why do you need to use a lens support?
Certain cameras have a very tight lens securing system, and some cameras such as the Canon 5D MK II and MK III have very loose lens securing systems. The Ronin-M balances the camera as one solid unit. If the mounted camera has a loose lens securing system, the lens support must be used. This is because a loose connection between the lens and the camera body may allow vibrations that travel through to the camera but not directly to the lens, resulting in the two masses shaking at different frequencies. The resulting oscillations XJMMCFUSBOTNJUUFEUPUIF*.6 DBVTJOHUIFXIPMFHJNCBMUPTIBLF*GUIFMFOTTVQQPSUmUT JUhT
best to use it at all times. The lens support can be installed facing outward or inward to accommodate different lens types.
&OTVSFBMJHONFOUPGUIFDBNFSBQMBUFBOEUIFOUJHIUFOUIFNPVOUJOHTDSFX CFGPSF
tightening the lens support. 3. With the gimbal facing outward on the tuning stand, slide the mounting plate into the receiver until the safety lock engages. Make sure the gimbal is not turned on when balancing the camera. 4. When the camera achieves a rough balance, tighten the camera base side clamp. You can adjust the tightness of the clamp with an M3 Allen wrench. 12 2015 DJI. All Rights Reserved. l B a a n c n g i Ronin-M User Manual
&RQJXULQJWKH+DQGOH%DU The customizable handle bar of the Ronin-M can be removed, if necessary, by following the steps below. 1. Loosen the two grip screws where the handle bar meets the gimbal, as shown. 2. Remove the grips from the handle bar. 3. You can remove one or both sides of the handle bar.
5IFSFTVMUJOHDPOmHVSBUJPOJTTIPXOCFMPX
Balancing To obtain the best performance from the Ronin-M, proper balancing is a must. Accurate balance is DSJUJDBMGPSTIPUTXIFSFUIF3POJO.XJMMCFTVCKFDUFEUPFYUSFNFNPWFNFOUTPSBDDFMFSBUJPOT SVOOJOH
horseback riding, biking, car mounts, helicopters, etc.). Proper balance will also offer a longer battery SVOUJNF5IFSFBSFUISFFBYFTUIBUOFFEUPCFBDDVSBUFMZCBMBODFEQSJPSUPUVSOJOHPOUIF3POJO.BOE
setting up the software. The camera needs to be fully configured, with all accessories, prior to installing and balancing the camera on the gimbal. If the camera has a lens cap, be sure to remove it prior to balancing. Be sure that the Ronin-Ms power is turned off while balancing the camera. 2015 DJI. All Rights Reserved. 13 l B a a n c n g i Ronin-M User Manual Step 1: Balancing the Vertical Tilt To adjust the vertical balance, you will need to change the cameras vertical position. Adjust the height of the crossbar to achieve vertical tilt balance.
3PUBUFUIF5JMU"YJTTPUIBUUIFDBNFSBMFOTJTQPJOUJOHVQXBSEBOEMPPTFOUIFUXPWFSUJDBM
adjustment tabs. 2. Gently slide the camera mount crossbar forwards or backwards until the camera points upwards when released. 3. Tighten the tabs and manually rotate the assembly, simulating tilt, to ensure there is no binding in the tilt motor. When proper balance is achieved, you can rotate the camera to any tilt angle, and it will stay in that position.
&OTVSFUIFNFBTVSFNFOUNBSLTNBUDIVQPOFJUIFSTJEFPGUIFWFSUJDBMCBST*GUIFZEPOPU
match up, the assembly could possibly be skewed higher or lower on one side, which would cause the tilt motor to bind. Step 2: Balancing the Roll Axis
#BMBODJOHUIFDBNFSB GSPNMFGUUPSJHIU POUIF3PMM"YJTJTBMTPSFRVJSFE8IFOUIFQSPQFSMFGUSJHIUSPMM
balance is achieved, the camera will stay level. 1. Loosen the two lock-knobs to allow the camera and mounting plate to slide left and right.
4MJEFUIFDBNFSBMFGUPSSJHIUVOUJMUIF3PMM"YJTSFNBJOTMFWFM
3. Tighten the two lock-knobs to lock the camera mounting plate in position. When adjusting the roll balancing position of the camera, only loosen the two lock-knobs a GFXUVSOTUPBMMPXUIFDBNFSBCBTFUPTMJEF%POPUMPPTFOUIFMPDLLOPCTFYDFTTJWFMZ
Step 3: Balancing the Tilt Axis
#BMBODJOHUIFDBNFSBPOUIFUJMUBYJTJTBMTPOFDFTTBSZ8IFOUIFQSPQFSGPSFBOEBGUUJMUCBMBODFJT
BDIJFWFE UIFDBNFSBXJMMTUBZMFWFMXIFOZPVSFNPWFZPVSIBOE XIJMFIPMEJOHUIFSPMMBYJTJOQPTJUJPO
14 2015 DJI. All Rights Reserved. l B a a n c n g i Ronin-M User Manual
-PPTFOUIFDBNFSBCBTFhTTJEFDMBNQUPBMMPXUIFDBNFSBBOENPVOUJOHQMBUFUPTMJEFGPSXBSET
and backwards.
4MJEFUIFDBNFSBGPSXBSETPSCBDLXBSETVOUJMUIFUJMUBYJTSFNBJOTMFWFM0OMZWFSZTNBMM
adjustments are required to achieve the proper balance. 3. Tighten the side clamp to lock the camera and mounting plate in position. If properly balanced, the camera should be able to remain steady at any given tilt angle. 6WHS%DODQFLQJWKH3DQ$[LV 5IFFOUJSFNBTTCFMPXUIFQBONPUPSNVTUCFCBMBODFEPOUIFDFOUSBMBYJTMJOFPGUIFQBONPUPS5P
BDIJFWFUIJTCBMBODF ZPVNVTUBEKVTUUIFQBOBYJTTMJEF
0QFOUIFDMBNQ<>POUIFQBOBYJTBOEUVSOUIFLOPC<>UPTMJEFUIFBTTFNCMZ*EFOUJGZJGUIF
Ronin-M is front heavy or rear heavy.
8IJMFUIF3POJO.JTSFTUJOHPOUIFUVOJOHTUBOE USZSPUBUJOHUIF3POJO.BMPOHUIFQBOBYJTCZ
MJGUJOHPOFTJEFPGUIFIBOEMFCBS*GUIFDBNFSBEPFTOPUTXJOH UIFQBOBYJTJTQSPQFSMZCBMBODFE
Tighten the clamp after balancing is completed.
[1]
[2]
Advanced Roll Adjustment If additional roll adjustment is needed in cases where the camera itself is too light in comparison to the tilt motor assembly, advanced roll adjustment can be achieved by loosening the indicated screws and pushing the assembly to the right or left. 2015 DJI. All Rights Reserved. 15 DJI Ronin-M Assistant App Tuning
"GUFSCBMBODJOHUIFNFDIBOJTN ZPVDBOmOFUVOFUIFCBMBODFCZBEKVTUJOHTPGUXBSFQBSBNFUFSTJOUIF
DJI Assistant App. Download and Install 1. Download the DJI Assistant app:
'PSUIFJ04WFSTJPO TFBSDIi%+*"TTJTUBOUwJOUIF"QQ4UPSF UIFOGPMMPXUIFJOTUBMMBUJPOJOTUSVDUJPOT
4FBSDIi%+*3POJOwPOUIF(PPHMF1MBZUIFOGPMMPXJOTUSVDUJPOTGPSUIF"OESPJEWFSTJPO
&OTVSFUIBU#MVFUPPUIJTFOBCMFEPOZPVSNPCJMFEFWJDFBOEPSJFOUUIFDBNFSBJOUIFTUBOEBSE
operating position (facing forwards). Turn on your Ronin-M, then open the DJI Assistant App.
8IFOVTJOHUIF%+*"TTJTUBOU"QQGPSUIFmSTUUJNF ZPVXJMMCFQSPNQUFEUPSFHJTUFSVTJOHBWBMJE
e-mail address. 4. Connect your device to the Ronin-M by following the step-by-step instructions in the DJI Assistant App. After connecting to the gimbals main control, you will see the Wizard menu. When the indicator at the top of the screen displays solid green and the blue light is blinking, the DPOOFDUJPOJTDPNQMFUF5IFHSFFO-&%POUIF3POJO.XJMMBMTPMJHIUVQ
After enabling Bluetooth on your mobile device, return to the DJI Assistant App to connect to the Ronin-M. The Ronin-M will not appear in the mobile devices Bluetooth device list. It can only be connected via the DJI Assistant App. Basic Settings The functions accessible in the Wizard are the most basic functions you may want to adjust upon receiving your Ronin-M. These options are also the most frequently used functions during standard operation. You can adjust all of these settings in the Wizard menu. N/A Mode Wizard
Gimbal N/A Mode Wizard
D J I i R o n n
-
M A s s s t a n i t A p p T u n n g i Gimbal Calibrate Live Data Auto Tune Stability Power
Pan Tilt Roll Angle
Briefcase Mode Briefcase Mode SmoothTrack Mode Pan SmoothTrack Tilt SmoothTrack Roll SmoothTrack Pan SmoothTrack Tilt SmoothTrack Roll SmoothTrack SmoothTrack Adjustments Speed Deadband Accel
Pan Axis Tilt Axis Roll Axis
SmoothTrack Test Test Pan Speed Test Tilt Speed Gimbal Pan Axis Tilt Axis Roll Axis Speed Wizard Deadband
Accel
SmoothTrack Test Test Pan Speed Test Tilt Speed Test Roll Speed Control Speed Adjustment Thumb Controller Remote Operator Pan
Tilt
Gimbal Control Viewer More Gimbal Control Viewer More Gimbal Control Viewer More 1. Calibrate
"VUP5VOF4UBCJMJUZQSPWJEFTBOFBTZPOFUPVDICVUUPOGPSBVUPNBUJDDPOmHVSBUJPOPGFBDIBYJT5IF
USBKFDUPSZ TQFFE QPXFS BOETUJGGOFTTPGNPUPSTBSFBVUPNBUJDBMMZUVOFEGPSUIFDBNFSBDPOmHVSBUJPO
UIBUJTNPVOUFE"VUP5VOF4UBCJMJUZTIPVMECFUBQQFEXIFOFWFSBOFXDBNFSBDPOGJHVSBUJPOJT
mounted or whenever the lens or accessories are changed. This will ensure stability and provide ideal calibrated settings. 16 2015 DJI. All Rights Reserved. Ronin-M User Manual 2. Live Data 5IJTEBUBSFQSFTFOUTUIFGFFECBDLGSPNFBDINPUPSBYJT*GBQBSUJDVMBSNPUPSBYJTJOEJDBUFTBQPXFS
reading greater than 10, this often means the mechanical balancing of the camera hasnt been properly BEKVTUFE"QSPQFSMZCBMBODFEDBNFSBSJHXJMMEJTQMBZSFBEJOHTDMPTFUPQPXFSPOFBDIBYJT CVUUIFTF
WBMVFTNBZWBSZ5IFBOHMFSFBEJOHJOEJDBUFTUIFDVSSFOUBOHMFPGFBDIBYJTJOSFMBUJPOUPDFOUFS
3. Briefcase Mode When Briefcase Mode is switched on, the Ronin-M will be able to seamlessly transform into this operation mode. With Briefcase Mode turned off, the Ronin-M will allow the camera to roll when the 3POJO.JTUJMUFEQBTUUIFTUBOEBSESPMMBYJTQBSBNFUFST
6PRRWK7UDFN0RGH 8IFO4NPPUI5SBDL.PEFJTFOBCMFE UIF3POJO.XJMMDBOCFTUFFSFE POUIFTFMFDUFEBYJT CZUIF
DBNFSBTPQFSBUPS5IFTUFFSJOHUSBOTMBUJPOTQFFEDBOCFBEKVTUFEGPSFBDIBYJTJOEFQFOEFOUMZ8IFO
UIF3POJO.hTUPQCBSJTSPUBUFEMFGUPSSJHIU UIFDBNFSBXJMMNPWF TNPPUIMZGPMMPXJOHUIFVTFSTJOQVU
BOETUPQBUUIFBQQSPQSJBUFBOHMF*OUIF4NPPUI5SBDLPQUJPOTNFOV UIFTFUUJOHTGPSUIFQBOBYJT SPMM
BYJTBOEUIFUJMUBYJTDBOCFJOEFQFOEFOUMZBEKVTUFE
5IFQBOBYJTTQFFEXJMMEFUFSNJOFIPXGBTUUIFDBNFSBXJMMUSBWFMXIJMFUSBOTMBUJOHBQBONPWFNFOU1BO
deadband will determine how much movement the gimbal will tolerate prior to translating the cameras pan. 5IFSPMMBYJTTQFFEXJMMEFUFSNJOFIPXGBTUUIFDBNFSBXJMMUSBWFMXIJMFUSBOTMBUJOHBSPMMNPWFNFOU3PMM
deadband will determine how much movement the gimbal will tolerate prior to translating the cameras roll. 5IFUJMUBYJTTQFFEXJMMEFUFSNJOFIPXGBTUUIFDBNFSBXJMMUSBWFMXIJMFUSBOTMBUJOHBUJMUNPWFNFOU5JMU
deadband will determine how much movement the gimbal will tolerate prior to translating the cameras tilt. 5IF4NPPUI5SBDLQBO SPMM BOEUJMUTQFFEDBOCFUFTUFE&OTVSFUIFSFJTOPPCTUSVDUJPOPGUIFDBNFSB
before tapping the test button. 5. Control Speed Adjustment 5IFSFNPUFDPOUSPMTQFFEDBOCFBEKVTUFEIFSF5IJTTFUUJOHSFQSFTFOUTUIFNBYJNVNTQFFEJOUIFQBOBOE
UJMUBYJTXIFOUIFSFNPUFDPOUSPMTUJDLTBSFQVTIFEBMMUIFXBZJOBOZHJWFOEJSFDUJPO
Advanced Settings D J I i R o n n
-
M A s s s t a n i t A p p T u n n g i There are more advanced functions you can adjust through the Assistant to meet your requirements. Gimbal Menu Mode:N/A Gimbal Mode:N/A Motor SmoothTrack Gimbal Wizard
Gimbal SmoothTrack Mode Motor SmoothTrack Auto Tune Stability Configuration Pan Axis Tilt Axis Roll Axis Live Data Stiffness Trim
Power
Pan Tilt Roll Angle
Pan SmoothTrack Tilt SmoothTrack Roll SmoothTrack SmoothTrack Adjustments Speed Deadband Accel
Pan Axis Tilt Axis Roll Axis Test
Test Pan Speed Test Tilt Speed Gimbal Control Viewer More Gimbal Control Viewer More Gimbal Control Viewer 2015 DJI. All Rights Reserved. 17 More D J I i R o n n
-
M A s s s t a n i t A p p T u n n g i Ronin-M User Manual 1. Motor Adjustment 5IF"VUP5VOF4UBCJMJUZCVUUPOBMMPXTGPSBVUPNBUJDBEKVTUNFOUPGFBDINPUPSTTUJGGOFTT BTSFMBZFEGSPNUIF
sensors and interpreted by the Ronin-M) to accomplish an optimized setting. Besides the stiffness, there BSFPUIFSFMFDUSPOJDTFUUJOHTCFJOHUVOFE*UJTIJHIMZSFDPNNFOEFEUIBUUIF"VUP5VOF4UBCJMJUZCVUUPOCF
UBQQFEXIFOFWFSBOFXDBNFSBDPOmHVSBUJPOJTNPVOUFEPSUIFMFOTPSBDDFTTPSJFTBSFDIBOHFE5IJTXJMM
offer the optimal stability and settings.
&BDIBYJTIBTJUTPXOTUJGGOFTTBOEUSJNBEKVTUNFOU5IFNPUPSTUJGGOFTTBEKVTUNFOUBMMPXTUIFVTFSUPmOF
UVOFUIFBNPVOUPGQPXFSUIBUJTBQQMJFECZUIFNPUPSTBTUIFZSFBDUBOECBMBODFUIFXFJHIUPOFBDIBYJT
The higher you adjust the stiffness settings, without causing any vibrations or oscillations to the gimbal, the CFUUFSZPVSFYQFSJFODFXJMMCF*ONPTUDBTFT UIF"VUP5VOF4UBCJMJUZTFUUJOHTXJMMCFTVJUBCMF
2. SmoothTrack Mode 3FGFSUPUIF#BTJD4FUUJOHTTFDUJPOGPSEFUBJMTSFMBUJOHUP4NPPUI5SBDL.PEF. Control Menu 1. Deadband The thumb controller and the remote operator control can have independently adjusted pan and tilt deadband settings. The larger the deadband, the more stick movement will be required to translate into actual movement of the gimbal. Control Deadband
Control Maximum Speed
Deadband Adjustment Control Speed Adjustment Thumb Controller Remote Operator Pan
Tilt
Thumb Controller Remote Operator Pan
Tilt
Wizard N/A Mode Control Deadband Maximum Speed Smoothing Endpoint Channels Settings Gimbal Control Viewer More Gimbal Control Viewer More Gimbal Control Viewer More 2. Maximum Speed
.BYJNVN4QFFEJTBGVODUJPOUIBUQSFWFOUTUIFDPOUSPMTUJDLSFTQPOTFGSPNCFJOHBMJOFBSSFTQPOTF
which is also known as an increasing response curve. This means the amount that the gimbal moves POUIFQBOPSUJMUBYJTJTOPUEJSFDUMZQSPQPSUJPOBMUPDPOUSPMTUJDLNBOJQVMBUJPO$POUSPMTUJDLSFTQPOTF
can be adjusted to be milder below the first half of control stick travel and increased to a higher TQFFEUPXBSETUIFMBTUIBMGPGDPOUSPMTUJDLUSBWFM5IFQSFTFUFYQPOFOUJBMDVSWFJTDBMJCSBUFECBTFEPO
NBYJNVNTQFFEJOQVU5IFNBYJNVNTQFFETPGUIFUIVNCDPOUSPMMFSBOEUIFSFNPUFDPOUSPMTUJDLT
can be set independent of each other. 18 2015 DJI. All Rights Reserved. Control Smoothing
Smoothing Adjustment Thumb Controller Remote Operator Pan
Tilt
Ronin-M User Manual Control N/A Mode Endpoint Endpoint Adjustments
Left
Up
Right
Down
Pan Axis Tilt Axis Test Test Pan Endpoints Test Tilt Endpoints Gimbal Control Viewer More Gimbal Control Viewer More 3. Smoothing When the control stick input is released, the translated movement will be smoother and slower than if the smoothing is increased. If smoothing is set to 0, the slowdown will be translated as an abrupt stop. The thumb controller and remote operator control sticks can be set independently. Pan and tilt smoothing can also be independently adjusted.
5HPRWH&RQWURO(QGSRLQWV$GMXVWPHQW 1BOBYJTFOEQPJOUTDBOCFBEKVTUFEJOEFQFOEFOUMZ GPSMFGUBOESJHIUNPWFNFOU XIFOVTFEXJUIB
SFNPUFDPOUSPMPSUIFUIVNCDPOUSPMMFS1BOBYJTFOEQPJOUTFUUJOHTEFUFSNJOFUIFGBSUIFTUQPJOUTUP
which the gimbal will rotate left or right during controller input. 5JMUBYJTFOEQPJOUTDBOCFBEKVTUFEJOEFQFOEFOUMZGPSVQBOEEPXONPWFNFOUXIFOVTFEXJUIB
SFNPUFDPOUSPMPSUIFUIVNCDPOUSPMMFS5JMUBYJTFOEQPJOUTFUUJOHTDPOUSPMUIFNBYJNVNQPJOUTUPXIJDI
the gimbal can rotate up or down. 5IFQBOBOEUJMUFOEQPJOUTDBOCFUFTUFE&OTVSFUIFDBNFSBJTVOPCTUSVDUFECFGPSFUBQQJOHUIFUFTU
buttons.
*GUIFBCJMJUZUPSPUBUFPOUIFQBOBYJTJTOFFEFE TJNQMZBEKVTUUIFQBOFOEQPJOUTUP*GFOEQPJOUT
BSFTFUUP UIFQBOBYJTXJMMOPUNPWFXIFOUIF5FTU1BO&OEQPJOUCVUUPOJTQSFTTFE
5. Channels 5IFDIBOOFMJOEJDBUPSQSPWJEFTGFFECBDLEVSJOHSFNPUFPQFSBUPSDPOmHVSBUJPO1BO UJMU BOESPMMDBO
CFSFBTTJHOFEUPFJUIFSPGUIFSFNPUFDPOUSPMTUJDLT&BDIBYJTDBOBMTPCFSFWFSTFE
6. Settings Controller Priority: If both input devices simultaneously send control signals to the gimbal, the input from the selected controller will take priority and will control the device at that given time. 1BO5JMU3FNPUF4QFFE"EKVTUNFOU$MJDLUPDIPPTFDPNCJOFEPSJOEFQFOEFOUTFUUJOHT
4QFFE5PHHMF1SFTFUT5IFTFQSFTFUTXJMMBMMPXZPVUPDIBOHFUIF4NPPUI5SBDLTQFFESFNPUFMZ*GUIF
SFNPUFDPOUSPMJTUVSOFEPO UIF4QFFE5PHHMF1SFTFUTGPS4NPPUI5SBDLXJMMUBLFQSFDFEFODFPWFSUIF
2015 DJI. All Rights Reserved. 19 D J I i R o n n
-
M A s s s t a n i t A p p T u n n g i D J I i R o n n
-
M A s s s t a n i t A p p T u n n g i Ronin-M User Manual
"TTJTUBOUTFUUJOHT0ODFUIFSFNPUFDPOUSPMJTUVSOFEPGG UIF4NPPUI5SBDLTFUUJOHTJOUIF"TTJTUBOUXJMM
take over. Viewer Menu Control Channels
Channels CH 0 CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 Pan Tilt Roll Normal Normal Normal REV REV REV Normal Normal N/A Mode Settings
Control Controller Priority Remote Operator Thumb Controller Pan/Tilt Remote Speed Adjustment Combined Independent Speed Toggle Presets Pan Tilt Roll Fast Normal Slow Gimbal Control Viewer More Gimbal Control Viewer More The viewer provides all the essential live data for monitoring the gimbals electronics, as well as GFFECBDLGSPNUIFNPUPST1PXFSJTJOEJDBUFEGPSFBDIBYJT5IFDVSSFOUBOHMFPGFBDIBYJTJTBMTP
indicated. The voltage of the battery, temperature of the main electronics, and also current uptime can also be monitored via this menu. Viewer
Power 2
-2 0 Angle 1.89
-0.45
-0.01 Pan Axis Tilt Axis Roll Axis Power Angle Mode N/A More
Briefcase Mode Motor Kill Roll Control Internal Receiver Silent Mode Calibrate Center Calibrate System Voltage Temperature Time 14.50V 35.40 0:01:59 Restore Default Settings Accounts
Gimbal Control Viewer More Gimbal Control Viewer More 20 2015 DJI. All Rights Reserved. Ronin-M User Manual More Menu Briefcase Mode When Briefcase Mode is switched on, the Ronin-M will be able to seamlessly transform into this operation mode. With Briefcase Mode turned off, the Ronin-M will allow the camera to roll when the 3POJO.JTUJMUFEQBTUUIFTUBOEBSESPMMBYJTQBSBNFUFST
Motor Kill When the Motor Kill switch is activated, the Ronin-M is still powered on, but the motors will be powered off. This will allow an adjustment to the gimbal or camera without having to turn it off completely. Prior to turning off the Motor Kill switch, make sure the gimbal is positioned in the standard operating QPTJUJPO5IF.PUPS,JMMTXJUDIDBOBMTPCFVTFEJGUIFHJNCBMPQFSBUPSFYQFSJFODFTBOJTTVFPSOFFET
to make a quick mechanical adjustment to the gimbal or camera setup. Roll Control 8IFOUIF3PMM3FNPUF$POUSPMJTPGG UIFSPMMBYJTNPWFNFOUDBOOPUCFDPOUSPMMFECZBSFNPUFDPOUSPM
or the thumb controller. Silent Mode
&OBCMF4JMFOU.PEFUPSFEVDFUIFMFWFMPGOPJTFUIBUJTDSFBUFECZUIFNPUPSTJOFOWJSPONFOUTTVDIBTB
quiet room. By enabling silent mode, larger and sudden gimbal movements may not be as accurately stabilized during use in situations such as running when silent mode wouldnt really be needed. Use silent mode in quiet conditions where light motor noise may be an issue during audio recording. Otherwise, it is recommended to leave silent mode off. Internal Receiver When the Internal Receiver is off, the gimbal cannot be controlled by a remote control or the thumb controller, and can only be controlled by other devices via a D-Bus or Lightbridge connection. Calibrate Center
*GUIF3POJO.TQBOBYJTJTPGGDFOUFS ZPVDBOSFDBMJCSBUFUIFUSVFDFOUFSPGUIF3POJO.VTJOHUIJT
TXJUDI6TJOHBSFNPUFDPOUSPM QPTJUJPOUIFQBOBYJTBUEFBEDFOUFS UIFOUBQUIF$BMJCSBUF$FOUFS
CVUUPO5BQi$FOUFSwBHBJOJOUIFQPQVQUPDPOmSN3FTUBSUUIFEFWJDFBGUFSSFDBMJCSBUJOHUIFDFOUFS
Calibrate System
$BMJCSBUF4ZTUFNJTPOMZVTFEJGZPVOPUJDFBOZLJOEPGESJGUJOBOZPGUIFBYFT5PDBMJCSBUFUIFTZTUFN
QMBDFUIF3POJO.POUIFUVOJOHTUBOEBOENBLFTVSFJUJTDPNQMFUFMZTUFBEZ&OTVSFBEFHSFFT
movement of the camera with the lens pointing straight down is possible without any interference from WJEFPNPOJUPSXJSFTEVSJOHUIFNPWFNFOU5IFOUBQUIF$BMJCSBUF4ZTUFNCVUUPOBOEMFUUIFQSPDFTT
mOJTICFGPSFQJDLJOHVQUIF3POJO.%POPUNPWFUIF3POJO.EVSJOHDBMJCSBUJPO3FTUBSUUIF3POJO.
after calibration is complete. Restore Default Settings 5IJTXJMMSFTUPSFBMMPGUIFGBDUPSZEFGBVMUTFUUJOHTUIBUDBOCFDPOmHVSFEUISPVHIUIF%+*"TTJTUBOUBQQ
Device List 5PGPSDFUIF%+*"TTJTUBOU"QQUPmOEUIF3POJO. PQFOUIF%FWJDF-JTUBOEUIFBQQXJMMTFBSDIGPS
Bluetooth devices it recognizes. 2015 DJI. All Rights Reserved. 21 D J I i R o n n
-
M A s s s t a n i t A p p T u n n g i D J I P C
/
M A C A s s s t a n i t T u n n g i DJI PC / MAC Assistant Tuning
:PVDBOBMTPDPOmHVSFUIF3POJO.BOEVQHSBEFUIFmSNXBSFUISPVHIUIF%+*1$."$"TTJTUBOU
5IFDPOmHVSBUJPOTFUUJOHTPGUIF%+*"TTJTUBOU"QQBOE%+*1$."$"TTJTUBOUBSFUIFTBNF
There is no need to repeat settings adjustment in both Assistants. The DJI Assistant App and the DJI PC/MAC Assistant program cannot be connected at the same time. If running the DJI Assistant App on your mobile device, be sure to disconnect UIFNJDSP64#DBCMFCFGPSFVTJOHUIF%+*1$."$"TTJTUBOUPOB1$."$
Install DJI PC / MAC Assistant Installing and Running on Windows
%PXOMPBEUIF%+*8*/%3*7&3*/45"--&3GSPNUIF3POJO.QSPEVDUQBHFPO%+*DPN$POOFDU
UIF3POJO.UPZPVS1$WJBUIFQSPWJEFE64#DBCMFBOECFTVSFUIF3POJO.JTQPXFSFEPOQSJPS
UPJOTUBMMJOHUIF%+*8*/%3*7&3
2. Download the appropriate Assistant installer from DJI.com.
%PVCMFDMJDLUIF"TTJTUBOUJOTUBMMFSBOEGPMMPXUIFTUFQTUPmOJTIUIFJOTUBMMBUJPO
4. Run Assistant.
6QHSBEFUIFmSNXBSFPSDPOmHVSFQBSBNFUFSTVTJOHUIF"TTJTUBOUBTOFFEFE
5IF"TTJTUBOUJOTUBMMFSTVQQPSUT8JOEPXT91 8JO BOE8JO PSCJU
Installing and Running on Mac OS X 1. Download the Assistant installer (.DMG) from the Ronin-M product page on DJI.com.
3VOUIFJOTUBMMFSBOEGPMMPXUIFQSPNQUTUPmOJTIUIFJOTUBMMBUJPO
8IFOMBVODIJOHGPSUIFmSTUUJNF JGVTJOH-BVODIQBEUPSVOUIF3POJO."TTJTUBOU -BVODIQBE
XJMMCMPDLBDDFTTCFDBVTFUIF"TTJTUBOUIBTOPUCFFOSFWJFXFECZUIF"QQ4UPSF
22 2015 DJI. All Rights Reserved. Ronin-M User Manual
-PDBUFUIF(JNCBMJDPOVTJOHUIF'JOEFS QSFTTi$POUSPM wUIFODMJDLUIFJDPO PSSJHIUDMJDLUIF
JDPOVTJOHBNPVTF
$IPPTF0QFOGSPNUIFTIPSUDVUNFOV UIFODMJDL0QFOJOUIFEJBMPHCPYUP
launch the program.
"GUFSUIFmSTUTVDDFTTGVMMBVODI EPVCMFDMJDLUIF(JNCBMJDPO BTVTVBM UPMBVODIUIFQSPHSBN
using Finder or Launchpad. 5IF%.(JOTUBMMFSTVQQPSUT.BD049PSBCPWF
3POJO."TTJTUBOUPO.BD049BOE8JOEPXTBSFUIFTBNF"TTJTUBOUQBHFTTIPXOJOUIJT
manual are from the Windows version. 2015 DJI. All Rights Reserved. 23 D J I P C
/
M A C A s s s t a n i t T u n n g i Ronin-M User Manual Settings
"EKVTUUIFGPMMPXJOHCBTJDGVODUJPOTCFGPSFVTJOHUIF3POJO."VUP5VOF4UBCJMJUZ #SJFGDBTF.PEF
4NPPUI5SBDL BOE.BYJNVN4QFFE"EKVTUNFOU
5IFEFmOJUJPOBOEGVODUJPOPGFWFSZCVUUPOJOUIF%+*"TTJTUBOU"QQBOE%+*1$"TTJTUBOUBSFUIFTBNF
refer to the section describing the DJI Assistant App for more details. Basic 1. Gimbal Motor: 5IF"VUP5VOF4UBCJMJUZCVUUPOBMMPXTGPSBVUPNBUJDBEKVTUNFOUPGFBDINPUPSTTUJGGOFTTTFUUJOHT
(as relayed from the sensors and interpreted by the Ronin-M) to accomplish an optimized setting.
&BDIBYJTIBTJUTPXOTUJGGOFTTBOEUSJNBEKVTUNFOU
Live Data: 5IJTNPOJUPSTUIFGFFECBDLGSPNUIFNPUPSTPOFBDIBYJT
Briefcase Mode:4FMFDUUIFDIFDLCPYUPFOBCMF#SJFGDBTF.PEF
(QDEOH6LOHQW0RGH4FMFDUUIFDIFDLCPYUPSFEVDFNPUPSOPJTF
Internal Receiver Off:4FMFDUUPQSFWFOUUIFHJNCBMGSPNCFJOHDPOUSPMMFECZUIFJODMVEFESFNPUF
controller or the optional thumb controller. The gimbal can then only be controlled by other devices via a D-Bus or Lightbridge connection when the Internal Receiver is off. Roll Remote Control Off: 4FMFDUUIJTDIFDLCPYUPQSFWFOUUIFSPMMBYJTNPWFNFOUGSPNCFJOHDPOUSPMMFE
by the included remote controller or the optional thumb controller. Motor Kill Switch: 4FMFDUUIFDIFDLCPYUPFOBCMFUIF.PUPS,JMM4XJUDI
SmoothTrack: 4FMFDUUIJTDIFDLCPYUPFOBCMF4NPPUI5SBDL/PUFUIBUUIFQBOBYJTBOEUIFUJMUBYJTDBO
be adjusted independently. 5IFQBOBOEUJMU4NPPUI5SBDLTQFFEDBOCFUFTUFE&OTVSFUIBUUIFSFJTOPUIJOHPCTUSVDUJOHUIF
camera when running the test procedures. Reset Password: If you forgot your Bluetooth connection password, click here to reset your password. Calibrate Center:*GUIF3POJO.TQBOBYJTJTPGGDFOUFS ZPVDBOSFDBMJCSBUFUIFUSVFDFOUFSPGUIF
3POJO.VTJOHUIJTTXJUDI6TJOHBSFNPUFDPOUSPM QPTJUJPOUIFQBOBYJTBUEFBEDFOUFS UIFODMJDLUIF
$BMJCSBUF$FOUFSCVUUPO$MJDLi$FOUFSwBHBJOJOUIFQPQVQUPDPOmSN
24 2015 DJI. All Rights Reserved. D J I P C
/
M A C A s s s t a n i t T u n n g i Ronin-M User Manual Viewer Menu: The Viewer Menu provides essential live data for monitoring the Ronin-Ms electronics and GFFECBDLGSPNUIFNPUPST1PXFSJTJOEJDBUFEGPSFBDIBYJT5IFDVSSFOUBOHMFPGFBDIBYJTJTBMTPJOEJDBUFE
Calibrate System:$BMJCSBUF4ZTUFNJTPOMZVTFEJGZPVOPUJDFBOZLJOEPGESJGUJOBOZPGUIFBYFT5P
calibrate the system, place the Ronin-M on the tuning stand and make sure it is completely steady.
&OTVSFBEFHSFFTNPWFNFOUPGUIFDBNFSBXJUIUIFMFOTQPJOUJOHTUSBJHIUEPXOJTQPTTJCMFXJUIPVU
BOZJOUFSGFSFODFGSPNWJEFPNPOJUPSXJSFTEVSJOHUIFNPWFNFOU5IFOUBQUIF$BMJCSBUF4ZTUFNCVUUPO
BOEMFUUIFQSPDFTTmOJTICFGPSFQJDLJOHVQUIF3POJO.%POPUNPWFUIF3POJO.EVSJOHDBMJCSBUJPO
Restart the Ronin-M after calibration is complete. Auto Tune Stability: 5IF"VUP5VOF4UBCJMJUZCVUUPOBMMPXTGPSBVUPNBUJDBEKVTUNFOUPGFBDINPUPST
stiffness settings (as relayed from the sensors and interpreted by the Ronin-M) to accomplish an optimized setting. Default: Click here to restore all settings to the factory defaults. 2. Control The thumb controller and the remote operator control sticks have a Deadband, Maximum Speed, and Smoothing adjustment, all of which can be set independently.
(QGSRLQW1BOBYJTFOEQPJOUTDBOCFBEKVTUFEJOEFQFOEFOUMZGPSMFGUBOESJHIUNPWFNFOUXIFOVTFEXJUI
BSFNPUFDPOUSPMPSUIFUIVNCDPOUSPMMFS5JMUBYJTFOEQPJOUTDBOCFBEKVTUFEJOEFQFOEFOUMZGPSVQBOE
down movement when used with a remote control or the thumb controller.
*GUIFBCJMJUZUPSPUBUFPOUIFQBOBYJTJTOFFEFE TJNQMZBEKVTUUIFFOEQPJOUTGPSQBOUP*GFOEQPJOUT
BSFTFUUPGPSQBOBCJMJUZ UIFOUIF5FTU1BO&OEQPJOUGVODUJPOXJMMOPUDIBOHFUIFQBOBYJT
5IFQBOBOEUJMUFOEQPJOUTDBOCFUFTUFE&OTVSFUIBUUIFDBNFSBJTVOPCTUSVDUFEXIFODMJDLJOHUIFUFTU
buttons. Controller Priority: If both input devices simultaneously send control signals to the gimbal, the input from the selected controller will take priority and will control the device at that given time. Pan/Tilt Remote Speed Adjustment: Click to choose combined or independent settings. Speed Toggle Presets: 5IFTFQSFTFUTXJMMBMMPXZPVUPDIBOHFUIF4NPPUI5SBDLTQFFESFNPUFMZ*G
UIFSFNPUFDPOUSPMJTUVSOFEPO UIF4QFFE5PHHMF1SFTFUTGPS4NPPUI5SBDLXJMMUBLFQSFDFEFODF
2015 DJI. All Rights Reserved. 25 D J I P C
/
M A C A s s s t a n i t T u n n g i Ronin-M User Manual PWFSUIF"TTJTUBOUTFUUJOHT0ODFUIFSFNPUFDPOUSPMJTUVSOFEPGG UIF4NPPUI5SBDLTFUUJOHTJOUIF
Assistant will take over. 3. Channels 5IJTJTBDIBOOFMJOEJDBUPSUPQSPWJEFGFFECBDLEVSJOHSFNPUFPQFSBUPSDPOmHVSBUJPO1BO UJMU BOESPMM
DBOCFSFBTTJHOFEUPFJUIFSPGUIFSFNPUFDPOUSPMTUJDLT5IFDPOUSPMMFEBYJTDBOBMTPCFSFWFSTFE
%DWWHU\
This page provides all of the essential information regarding the Ronin-Ms battery. 26 2015 DJI. All Rights Reserved. D J I P C
/
M A C A s s s t a n i t T u n n g i Upgrade Ronin-M User Manual
:PVDBOWJFXUIFMBUFTUmSNXBSFWFSTJPOJOGPSNBUJPOPOUIJTQBHF6QHSBEFUIFmSNXBSFCZGPMMPXJOH
the steps below:
$POOFDUUIF3POJO.UPZPVSDPNQVUFSWJBUIF.JDSP64#DBCMFBOEXBJUVOUJMUIFJOEJDBUPS-&%
in the PC Assistant blinks blue.
$MJDLi6QHSBEFw
8BJUGPSUIFEPXOMPBEUPmOJTI
$MJDLi6QHSBEFwBHBJOBOEUIFODMJDLi$POmSNw
5. Power the Ronin-M off and then on after the upgrade is complete.
&OTVSFUIBUZPVSDPNQVUFSJTDPOOFDUFEUPUIF*OUFSOFU
$MPTFBOZBOUJWJSVTQSPHSBNTBOEOFUXPSLmSFXBMMT
&OTVSFUIBUUIF3POJO.JTQPXFSFEPOEVSJOHUIFVQHSBEF%POPUQPXFSPGGUIF3POJO.
until the upgrade is complete.
%POPUEJTDPOOFDUUIF64#DBCMFEVSJOHUIFVQHSBEF
Info You can check which version of the DJI Assistant App you are using in the Info tab. 5IF4/JTBEJHJUBVUIPSJ[BUJPODPEFUIBUJTVTFEUPBDUJWBUFDFSUBJOGVODUJPOT5IFBVUIPSJ[BUJPO
DPEFGPSZPVSVOJUJTFOUFSFEBGUFSJUJTNBOVGBDUVSFE:PVNBZCFBTLFEUPFOUFSBOFX4/BGUFS
VQHSBEJOH'JMMJOUIF4/BOEUIFODMJDLUIF8SJUFCVUUPO*GZPVFOUFSBOJOWBMJE4/NPSFUIBOUJNFT
the Ronin-M will be locked and you will need to contact customer support. 2015 DJI. All Rights Reserved. 27 D J I P C
/
M A C A s s s t a n i t T u n n g i
1 2 | User Manual Part 2 | Users Manual | 1.64 MiB |
Remote Control
[1]
[2]
[3]
[5]
[]
[8]
[]
[10]
[4]
[6]
[11]
[13]
[12]
[1] Antenna
[2] Carrying Handle
[3] Left Dial (reserved)
<> 1PTJUJPO4XJUDI.0%&
<> 1PTJUJPO4XJUDI'6/$5*0/
[6] Joystick 1
<> +PZTUJDL
<> /FDL4USBQ"UUBDINFOU
<> 1PXFS4XJUDI
[10] Power Indicator
[11] Battery Level Indicator
<>#BUUFSZ$IBSHJOH3$"TTJTUBOU1PSU
[13] Reserved Port
.JDSP64#QPSU
Connecting the Remote Control to the Ronin-M 1. Turn on the Ronin-M.
1SFTTUIF#JOE#VUUPO TIPXOCFMPX
PGUIF3POJO.PODF5IF3POJO.T-&%JOEJDBUPSXJMMCMJOL
green quickly at that time.
4MJEFUIFQPXFSTXJUDIUPUIFSJHIUUPQPXFSPOUIFSFNPUFDPOUSPM*GUIF-&%PGHJNCBMUVSOTTPMJE
green light, the remote control and the Ronin-M have been successfully bound. The binding process only needs to be done once, unless the bind button is pressed or if the Ronin-M needs to be bound to another remote control. Bind Button 28 2015 DJI. All Rights Reserved. t R e m o e C o n t r o l Ronin-M User Manual
1MFBTFNBLFTVSFUIBUUIFSFNPUFDPOUSPMJTTVGmDJFOUMZDIBSHFECFGPSFVTF*GUIFMPXCBUUFSZ
BMFSUTPVOET SFGFSUP3FNPUF$POUSPM1PXFS-&%*OEJDBUPS4UBUVTCFMPX
QMFBTFSFDIBSHF
the battery as soon as possible.
$IBSHFUIFSFNPUFDPOUSPMTCBUUFSZVTJOHUIFJODMVEFE.JDSP64#DBCMF6TJOHUIFJODPSSFDU
type of charging cable may cause damage.
5VSOPGGUIFSFNPUFDPOUSPMCFGPSFDIBSHJOH5IFQPXFS-&%JOEJDBUPSXJMMHMPXTPMJEHSFFO
when the battery is fully charged. When using the remote control, ensure that the antenna is at least 20cm away from any person. 5HPRWH&RQWURO3RZHU/(',QGLFDWRU6WDWXV 3RZHU/(',QGLFDWRU Sound Remote Control Status 4PMJE Green 4PMJE3FE None None Functioning normally Charging (remote control is powered off) 4PMJE:FMMPX None Remote control joystick calibration error, re-calibrate 4PMJE3FE BB---BB---BB Low voltage (from 3.5 V-3.53 V). Recharge the remote control 2VJDL3FEnBTIJOH 4MPX(SFFOnBTIJOH B-B-B...... B--B--B...... Critical low voltage (from 3.45V-3.5V); recharge the remote control immediately Alert will sound after 15 minutes of inactivity. It will stop once you start using the remote control. The remote control will turn off automatically when battery voltage drops below 3.45V. Charge the battery as soon as possible when the low voltage alert appears or sounds. Remote Control Battery Level Indicator Status The battery level indicator displays the current battery level. The following is a description of the indicators.
: 5IF-&%JTJOBTPMJETUBUFPO
: 5IF-&%JTCMJOLJOH
: 5IF-&%JTPGG
/('
/('
/('
/('
Current Battery Level
_
_
_
_
_
<0%
2015 DJI. All Rights Reserved. 29 t R e m o e C o n t r o l Ronin-M User Manual Remote Control Features 02'(5IF.0%&TXJUDIJTVTFEGPSUPHHMJOH4NPPUI5SBDL
*O1PTJUJPO 4NPPUI5SBDLJTPGG5IFSFNPUFDPOUSPMJTGSFFUPDPOUSPM
UIFQBOBYJTBOETUPQTBOEIPMETUIFMBTUQPTJUJPOEFUFSNJOFECZUIF
QBOBYJTDPOUSPMTUJDL
*O1PTJUJPO 4NPPUI5SBDLJTPO5IFSFNPUFDPOUSPMJTGSFFUPDPOUSPM
UIFQBOBYJTBOETUPQTBOEIPMETUIFMBTUQPTJUJPOEFUFSNJOFECZUIF
QBOBYJTDPOUSPMTUJDL
*O1PTJUJPO 4NPPUI5SBDLJTPO5IFHJNCBMXJMMSFPSJFOUBOESFTFUUIF
QBOBOHMFUPUIFGPSXBSEGBDJOHEJSFDUJPOXIFOUIFQBOBYJTDPOUSPM
stick is released. Position 1 Position 2 Position 3
-Free, SmoothTrack Off
-Free, SmoothTrack On
-Reset to Center, SmoothTrack On FUNCTION: 5IFSFBSFQPTTJCMFTFMFDUJPOT'BTU /PSNBM BOE4MPX5IFWBMVF
of each speed can be preset in the DJI Assistant App or DJI PC/
MAC Assistant. Position 1
-Fast Position 2
-Normal Position 3
-Slow
"DUJWBUJOH.PUPS,JMM4XJUDI 2VJDLMZnJQUIF'6/$5*0/4XJUDICFUXFFO1PTJUJPOBOE1PTJUJPO
BUMFBTUUISFFUJNFTUPBDUJWBUFUIF.PUPS,JMM4XJUDI3FQFBUUIJT
QSPDFTTUPUVSOPGGUIF.PUPS,JMM4XJUDI#FTVSFUPQPTJUJPOUIF
camera in the standard operating position before re-activating the HJNCBMTNPUPST5IF.PUPS,JMM4XJUDIJTVTFGVMJGUIFHJNCBMPQFSBUPS
runs into an issue or needs to make a quick mechanical adjustment to the gimbal or camera setup. Left Stick (Default settings): )PSJ[POUBMNPWFNFOUTPOUIFMFGUTUJDLDPOUSPMUIFSPMMBYJT
7FSUJDBMNPWFNFOUTIBWFOPEFmOJUJPO
Right Stick (Default settings):
Horizontal movements on the right stick control the pan BYJT
Right Stick (Default settings):
Vertical movements on the right TUJDLDPOUSPMUIFUJMUBYJT
These stick settings can be customized in the DJI Assistant App or DJI PC/MAC Assistant. 30 2015 DJI. All Rights Reserved. Ronin-M User Manual Adding a Third-Party Transmitter/Receiver The Ronin-M supports 3rd party transmitters/receivers, such as D-Bus. Connect the transmitter through the integrated port (refer to the Ronin-M Diagram for the location of the D-Bus port). Operation Modes There are three operation modes for the Ronin-M: Underslung Mode, Upright Mode and Briefcase Mode. Underslung Mode Underslung Mode is the standard, default mode. The Ronin-M can be used in this mode without any adjustments. Upright Mode Flip the gimbal forward 180 degrees and it will automatically change to Upright Mode. Alternatively, you can change the gimbal into upright mode before turning it on. Upright Mode is ideal for car mounts or other top down perspective camera positions, as it allows you to shoot higher and/or at eye MFWFM6QSJHIU.PEFDBOBMTPCFVTFEXJUIPVUBOZBEKVTUNFOUT%POPUnJQUIFHJNCBMTJEFXBZT MFGUPS
right) to convert to Upright Mode. 2015 DJI. All Rights Reserved. 31 O p e r a t i o n M o d e s Ronin-M User Manual Briefcase Mode
#SJFGDBTF.PEFBMMPXTZPVUPIPMEUIF3POJO.JOBTMJNQSPmMFDMPTFUPZPVSCPEZ5PVTF#SJFGDBTF
.PEF UJMUUIFHJNCBMUPUIFMFGUPSSJHIUPOUIFSPMMBYJT:PVDBOUVSO#SJFGDBTF.PEFPGGJOUIF%+*
Assistant app, in which case the Ronin-M will never automatically transform into Briefcase Mode. In Briefcase Mode, the remote control cannot pan, tilt, or roll the gimbal. Maintenance 5IFmHVSFCFMPXTIPXTUIFQSPQFSDPOmHVSBUJPOGPSUSBOTQPSUJOHUIF3POJO.XJUIUIF5VOJOH4UBOE
Using the hook-and-loop straps, lock the Ronin-M in place, as shown. Be sure to remove the straps prior to turning the Ronin-M on again. The Ronin-M is a precise machine and is not waterproof. Keep it away from sand and dust when in use. After use, it is recommended that you wipe the Ronin-M down with a soft dry cloth. Never spray any cleaning liquids onto the Ronin-M. 32 2015 DJI. All Rights Reserved. i t M a n e n a n c e Troubleshooting Problem Solution 1 Motors appear to be weak The gimbal is vibrating, even after tapping the
"VUP5VOF4UBCJMJUZCVUUPO After balancing the camera, launch the DJI Assistant App or the
%+*1$."$"TTJTUBOUBOEQSFTT"VUP5VOF4UBCJMJUZ8BJUGPS
UIFQSPDFTTUPmOJTIBOEUIFTUJGGOFTTTFUUJOHTXJMMCFEJTQMBZFE
on the screen.
(1) Check to make sure all knobs are tight, including the pan motor knob.
(2) Check to make sure the camera screw is tight. Push on the camera plate to make sure it is not loose or sliding on the gimbals camera mount.
5SZEFDSFBTJOHUIFTUJGGOFTTTFUUJOHPGFBDIBYJT#ZMPPLJOH
BUUIF1PXFSSFBEJOHTGPSUIFBYFT ZPVTIPVMECFBCMFUP
UFMMJGUIFSFJTPOFQBSUJDVMBSBYJTCFJOHBGGFDUFE
1BOBYJTTFFNTUPCF
off-center Open the DJI Assistant App or DJI PC/MAC Assistant, select the Calibrate Center and follow the on-screen instructions. Ronin-M seems to be drifting 1MBDFUIF3POJO.POUIF5VOJOH4UBOEBOEFOUFSUIF%+*"TTJTUBOU
"QQPSUIF%+*1$."$"TTJTUBOU5BQDMJDLUIF$BMJCSBUF4ZTUFN
CVUUPOBOEMFUUIFQSPDFTTmOJTICFGPSFQJDLJOHVQUIF3POJO.
4NPPUI5SBDLEPFTOPU
work
5VSOPOUIFSFNPUFDPOUSPMBOECFTVSFUIBUUIF.0%&
switch is not in Position 1 (the uppermost position). 6 Motors turn off automatically Gimbal turns off and doesnt come back on
$IFDLXIFUIFS4NPPUI5SBDLJTUVSOFEPGGJOUIF%+*"TTJTUBOU
App or the DJI PC/MAC Assistant software.
$IFDLXIFUIFSUIF4NPPUI5SBDLEFBECBOEJTUVSOFEVQUPP
IJHI*GJUJT SFEVDFUIFEFBECBOEWBMVFJOUIF4NPPUI5SBDL
Menu. Check your camera balance. If the power level in the Gimbal
.PUPST.FOVJOEJDBUFTBOPVUQVUPGPSNPSF POBOZBYJT
rebalance the camera. Restart the gimbal. There is a motor protection algorithm built into the Ronin-M to protect the electronic components. If any QBSUJDVMBSNPUPSFOUFSTBQSPUFDUJPONPEF NPUPSTIVUTPGGTJY
times within a one minute period), the Ronin-M will deactivate the motors and will not reactivate them until the unit has been restarted. Forgot the Bluetooth password Connect the Ronin-M to the DJI PC/MAC Assistant and click the 3FTFU1BTTXPSECVUUPOUPSFTFUUIFQBTTXPSE
Video footage appears to wobble from side-to-side or up-and-down 5IF4NPPUI5SBDLTQFFETFUUJOHJTUPPIJHIPSUIF4NPPUI5SBDL
EFBECBOETFUUJOHJTUPPMPX%FDSFBTFUIF4NPPUI5SBDLTQFFE
or increase the deadband. 2015 DJI. All Rights Reserved. 33 2 3 4 5
8
6SHFLFDWLRQV General Built-In Functions Peripheral Camera Tray Dimensions Accessory Power Connections GCU Input Power Connections Three Operation Modes Underslung Mode Upright Mode Briefcase Mode Built-in, independent IMU module
%+*4QFDJBMJ[FE(JNCBM%SJWF
.PUPSTXJUI&ODPEFST Bluetooth Module
64#$POOFDUJPO 2.4 GHz Receiver
5FNQFSBUVSF4FOTPS
%+*"EWBODFE#JU%41
Processor
%#VT3FDFJWFS4VQQPSUFE
.BYJNVNEFQUIGSPNUIFDFOUFSPGHSBWJUZPODBNFSBCBTFQMBUFNN
.BYJNVNIFJHIUNFBTVSFEGSPNUPQPGUIFDBNFSBCBTFQMBUFNN
.BYJNVNXJEUINN
73FHVMBUFE15BQY64#N8Y%+*-JHIUCSJEHFY
43POJO.#BUUFSZ
()[3FNPUF$POUSPM#MVFUPPUI64#
PC/."$"TTJTUBOU4PGUXBSF
Requirements 8JOEPXT91418JOEPXT8JOEPXT PSCJU
.BD049
PSBCPWF
.PCJMF"TTJTUBOU4PGUXBSF
Requirements
.PCJMF%FWJDFJ04PSBCPWF "OESPJEPSBCPWF 0HFKDQLFDO (OHFWULFDO&KDUDFWHULVWLFV Working Current 4UBUJDDVSSFOUN" !7
%ZOBNJDDVSSFOUN" !7
-PDLFENPUPSDVSSFOU.BY" !7 Operating Temperature
$_$ '_'
Weight
LH MC
GVMMZMPBEFEXJUIIBOEMFCBS
Gimbal Dimensions
NN 8
YNN %
YNN ) Working Performance Load Weight Capacity
(Reference Value) 3.6 kg (8 lb) Angular Vibration Range 0.02
.BYJNVN$POUSPM
3PUBUJPO4QFFE
.FDIBOJDBM&OEQPJOU3BOHF Controlled Rotation Range 34 2015 DJI. All Rights Reserved. 1BOBYJTTFD5JMUBYJTTFD3PMMBYJTTFD
1BOBYJT
5JMUBYJT6Q %PXO 3PMMBYJT
1BOBYJTDPOUSPM
5JMUBYJTDPOUSPM6QUP%PXO
3PMMBYJTDPOUSPM
4 Q F D m D B J U J P O T The content is subject to change. Download the latest version from http://www.dji.com/product/ronin-m If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. 2015 DJI. All Rights Reserved.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-11-23 | 2415 ~ 2473 | DTS - Digital Transmission System | Original Equipment |
2 | JBP - Part 15 Class B Computing Device Peripheral |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2015-11-23
|
||||
1 2 | Applicant's complete, legal business name |
SZ DJI TECHNOLOGY CO., LTD
|
||||
1 2 | FCC Registration Number (FRN) |
0022596753
|
||||
1 2 | Physical Address |
14th floor, West Wing, Skyworth Semiconductor
|
||||
1 2 |
Nanshan, Shenzhen, Guangdong, N/A 518057
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
t******@metlabs.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
SS3
|
||||
1 2 | Equipment Product Code |
800RM61510
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
X****** X****
|
||||
1 2 | Title |
PM
|
||||
1 2 | Telephone Number |
+8675********
|
||||
1 2 | Fax Number |
+86 7********
|
||||
1 2 |
c******@dji.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Shenzhen Morlab Communications Technology Co., Ltd
|
||||
1 2 | Name |
I**** Z****
|
||||
1 2 | Physical Address |
FL.3, Building A, FeiYang Science Park
|
||||
1 2 |
ShenZhen, GuangDong, 518010
|
|||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86-75********
|
||||
1 2 | Fax Number |
86-75********
|
||||
1 2 |
I******@morlab.cn
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | RONIN-M | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output Power listed is conducted. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Shenzhen Morlab Communications Technology Co., Ltd
|
||||
1 2 | Name |
I******** z********
|
||||
1 2 | Telephone Number |
86755********
|
||||
1 2 | Fax Number |
86-75********
|
||||
1 2 |
i******@morlab.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402 | 2480 | 0.000996 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 15C | 2415 | 2473 | 0.0108 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC