ANNE PRO 2 UserManual V1.1 ANNE PRO 2 UserManual V1.1 ANNE PRO 2 1. Connect 1.1 Connect over USB Cable 1.2 Connect over Bluetooth 2. Basic Function 2.1 F1~ F12 2.2 Direction Keys 2.3 Other Keys 2.4 TAP Layout 2.5 Magic Fn 3. Light Control 4. Setup bluetooth 4.1 Turn on Bluetooth broadcast 4.2 Switch Host 4.3 Bluetooth pairing with Windows 8/10 4.3.1 Check if your computer supports BLE 4.3.2 Pair with keyboard 4.4 Bluetooth pairing with Mac OS X 5. Technical Parameters ObinsLab Starter 1. Getting Started 1.1 Supported Platforms 1.2 Installation 1.3 Start Up Windows Mac OS X 2. Qick Guide 2.1 Device List 2.2 Keyboard Setting 2.3 Layout Setting 2.4 Light Setting 2.5 Macro Setting 3 Firmware Upgrade 3.1 ANNE PRO 2 3.1 ANNE PRO ANNE PRO 2 ANNE PRO 2 is a 60% size bluetooth RGB mechanical keyboard, its smart and save the space of the desk. Although it only have 61 keys, it can used like a stand 104 keys keyboard by key combination. 1. Connect 1.1 Connect over USB Cable Connect Steps:
1. Turn o the Bluetooth switch on the back of the keyboard 2. Connect your computer with a USB cable 1.2 Connect over Bluetooth 1. Turn on the Bluetooth switch on the back of the keyboard 2. Operate steps on computer, please refer to Chapter 4 2. Basic Function 2.1 F1~ F12 ANNE PRO 2 provide F1 ~ F12 F1 = FN1 + 1 F2 = FN1 + 2 F3 = FN1 + 3 F4 = FN1 + 4 F5 = FN1 + 5 F6 = FN1 + 6 F7 = FN1 + 7 F8 = FN1 + 8 F9 = FN1 + 9 F10 = FN1 + 0 F11 = FN1 +
F12 = FN1 + +
2.2 Direction Keys ANNE PRO 2 provide two groups of direction keys FN1 + W =
FN1 + A =
FN1 + S = !
FN1 + D = "
FN1 + I =
FN1 + J =
FN1 + K = !
FN1 + L = "
2.3 Other Keys FN1 + O = SCROOL LOCK FN1 + P = PAUSE BREAK FN1 + \| = PRINT SCREEN FN1 + :; = PAGE UP FN1 + '" = PAGE DOWN FN1 + .> = INSERT FN1 + /? = DELETE FN1 + [{ = HOME FN1 + ]} = END 2.4 TAP Layout For default, ANNE PRO 2 turn the Tap Layout on, and set Right Shift for , FN1 for , FN2 for ! and Righ Control for " . So for example, when click Right Shift alone, the function will be . You can completely customize your TAP Layout, or turn it o . Setup guide, please refer to Layout Setting 2.5 Magic Fn Magic Fn can been the copy of FN1 or FN2. By default, Magic Fn is o. To enable it, please refer to the guide of Obinslab Starter at chapter 2.2 3. Light Control ANNE PRO 2 presets a variety of lighting eects. To custom your own light eect/ eect group, please refer to the guid of Obinslab Starter FN2 + 9 = Switch Light FN2 + 0 = Trun Backlight On/O FN2 + - = Reduce Backlight Brightness FN2 + + = Increase Backlight Brightness 4. Setup bluetooth Before starting the next steps below, please conrm that the Bluetooth switch is at position On. Detail about turn on the Bluetooth switch, please refer to Chapter 1.2 4.1 Turn on Bluetooth broadcast Connect ANNE PRO 2 to a new host (Computer, Mobile, Pad etc), need Bluetooth pairing. To do this, need turn on Bluetooth broadcast rst. FN2 + 1 5 Seconds = Turn on Bluetooth broadcast on position 1 FN2 + 2 5 Seconds = Turn on Bluetooth broadcast on position 2 FN2 + 3 5 Seconds = Turn on Bluetooth broadcast on position 3 FN2 + 4 5 Seconds = Turn on Bluetooth broadcast on position 4 4.2 Switch Host Connect or switch ANNE PRO 2 to a paired host FN2 + 1 = Switch to host saved on position 1 FN2 + 2 = Switch to host saved on position 2 FN2 + 3 = Switch to host saved on position 3 FN2 + 4 = Switch to host saved on position 4 4.3 Bluetooth pairing with Windows 8/10 4.3.1 Check if your computer supports BLE If your computer does not support BLE, please purchase an adapter that supports BLE4.0. 1. Right click on the windows icon 2. Select Device Manager 3. If a MicroSoft Bluetooth Enumerator device is present, it means that the Bluetooth module supports BLE devices. If not, you need to purchase an adapter that supports BLE 4.0 4.3.2 Pair with keyboard 1. Right click on the windows icon, select menu Setting 2. Select menu Bluetooth & other devices 3. Open the Bluethooth switch 4. Click Add Bluetooth or other device 5. Click Bluetooth 6. Select AnnePro2 to pair, wait 5-10s to complete binding 4.4 Bluetooth pairing with Mac OS X 1. Open Bluetooth setting window, click Pair button to pair with AnnePro2 2. Click Pair on pairing request window 5. Technical Parameters Item Wired Wireless Size Weight Battery USB Input Voltage Parameters USB (Windows 7/8/10MacLinux) Bluetooth LE 4.0 (Windows 8/10MacLinux) 97 * 284 * 40mm 635g 1900mAh 5V DC USB Working Current 500mA Max Screw Torx T5 M2*9.5mm ObinsLab Starter Obinslab Starter is a PC tool for ANNE PRO 2 1. Getting Started 1.1 Supported Platforms System Windows 7 Windows 8 Windows 10 Mac OS X Ubuntu 1.2 Installation 32bit 64bit
-
-
1. Download the installation package: http://www.obins.net/occ/
2. Install 1.3 Start Up The function of macro record need a special authorization, and some anti-virus software may block it, please choose trust it. Tips: Please always download Obinslab Starter from http://www.obins.net/obinslab-starter, we can not guarantee the security of software downloaded from other channels. Windows Click the shortcut on the desktop Mac OS X The rst time launch Obinslab Starter, you will see the alert below, please authorize Obinslab Starter by clicking Open System Preferences in the alert, then selecting the checkbox for Obinslab Starter in the Privacy pane. 2. Qick Guide 2.1 Device List 1. Device List Devices connected over USB cable. Click Hello World to refresh device list(This usually does not need). 2. Setting Switch Language Switch Theme Software update 3. Software Version The current version of Obinslab Starter 2.2 Keyboard Setting Information and general setting for the keyboard 1. Battery Battery indicator 2. Running TimeKeyboard running time statistics 3. Layout Default: Default keyboard layout User: User customized keyboard layout 4. Tap Disable: Turn o keyboard TAP layout. Enable: Turn on keyboard TAP layout. 5. Magic Fn Disable: Turn o Magic Fn Fn1: Set Magic Fn to a copy of Fn1 Fn2: Set Magic Fn to a copy of Fn2 6. Macro Disable: Turn o Macro. Fn1: Set Fn1 to the hold key for trigger a Macro Fn2: Set Fn2 to the hold key for trigger a Macro 7. CapsLock Led Disable: Set CapsLock Led to default. If CapsLock on, led of CapsLock key will on. All: If CapsLock on, led of all keycaps will on. 8. Reset Bluetooth Clear Bluetooth bound info saved on keyboard. 2.3 Layout Setting 1. Layout Current: Layout read from keyboard. Qwerty, Mac, Dvorak: Preset layout. Click on icon + to add a new layout Right click on Current to Copy Right click on preset layout to Copy/Recover(set to default) Right click on user layout(added/copied) to Copy/Delete/Rename Double click on user layout to Rename(Enter for save, Esc for cancel) 2. Key code table Here list HID Key Code and ANNE PRO 2 special function keys 3. TOP The default layout, tap to trigger 4. FN1 Hold Fn1 to trigger 5. FN2 Hold Fn2 to trigger 6. TAP Usually set key code on modier key to extend it. To use TAP, non't forget to enable TAP option at keyboard setting page 7. Download Download the selected layout to keyboard. If layout is seated to "Default", download a layout will rewrite it to "User" automatically ANNE PRO 2 have four layers, they are TOPFN1FN2TAP. There are two ways to update keycode:
Drag the selected keycap, and drop on another keycap Select a keycap, choose new from **Key code table 2.4 Light Setting 1. Light Group Click on icon + to add light group Right click on custom light group item to Delete /Rename / Copy Right click on the Default light group to Copy / Recover(set to default) 2. Light List Click on icon + to add light eect(Limited to max 16) Click on light eect to Rename / Copy / Delete Right click on blank space to Paste the light eect copied Drag the light eect to sort 3. Color Palette Pick color on the color wheel Pick color from Default/Custom color block Right click on custom color block to save the current color 4. Setting Static Light Setting static single or static multiple light eect:
Select single/multiple keycap, and then pick a color on Color Palette Click on blank space to clear selected keycaps 5. Dynamic Light Eect None: Static light eect, RGB backlights on every keycap can be dened Breath/Breath grad/Rainbow/Breath single: Work together on Dynamic Light Color Table 6. Dynamic Light Color Table Setting color for Dynamic Light Eect 7. Preview Preview the selected light eect on keyboard 8. Download All Download the light eects listed in the selected light group to keyboard 2.5 Macro Setting 1. Macro Group Click on icon + to add macro group Right click on macro group to Remane/Copy/Delete Double click on macro group to Rename 2. Macro Key Indicate the macro trigger position Click on a blank keycap to Paste/Add macro(Limited to max 16) Click on macro keycap to select a macro Right click on macro keycap to Delete/Copy/Paste Drag on the macro keycap and drop on a blank keycap to update macro trigger position 3. Rec Macro Record a macro, the keycode typed in will show at Macro code 4. Macro Code Show the macro code of selected Insert time block Move up/down the macro code block Double click on time block to edit time(Enter for save, Esc for cancel) Delete macro code block 5. Download Download the macros listed in the selected macro group to the keyboard 3 Firmware Upgrade 3.1 ANNE PRO 2 In this page, you will get a list of rmware. For a better experience, we recommend upgrading to the latest. Upgrade to latest It's quite simple, just click the "Upgrade to Latest" button, what't all. Abnormal recovery If an accident(e.g. power failure, reboot, computer crash, and other unpredictable situations) occurs during the rmware upgrade, the keyboard can't be used. In this situation, you can use the abnormal recovery mode to recover the keyboard. 1. Turn o the Bluetooth switch on the back of the keyboard 2. Hold on Esc, plug in the USB cable. Release Esc key while "USB-HID IAP" show up on the screen 3. Select "USB-HID IAP" item to upgrade rmware again Experimental Features 1. Turn option Upgrade Source to Development in the software setting page 2. Restart Obinslab Starter and check rmware list again 3.1 ANNE PRO Comming soon FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.