FCC ID: TM72555GLTE Weight scale

Part no. 311-0099100-051 Product name

/No Logo//FCU/

Spec L297*W420mm///3(2+1)L148.5*W105mm/70P/

Designer Dana Color K:100 TD-2555G WEIGHT SCALE Operating Instructions ver 2.0 2022/04 311-0099100-051 INTENDED USE The TD-2555G Weight Scale is intended for the Body Mass Index / Body Weight measurement through the human body in a few seconds. The device is intended for use at home or in clinical settings. IMPORTANT SAFETY PRECAUTIONS Thank you for purchasing the TD-2555G Weight Scale. This manual provides important information that will help you to use this device. If you have any questions regarding this product, please contact the place of purchase. 1. Use this device ONLY for the intended use described in this manual. 2. Read all the instructions and information in this manual before using this device. 3. Do NOT use the device if it is not working properly or damaged. 4. Consult your physician or healthcare provider before beginning a weight loss or exercise program. 5. Consult your physician before using this device if you are pregnant. 6. Do NOT step on the edge of the weighing platform or jump on the weighing platform. 7. Do NOT step on the weighing platform if your body or feet are wet. 8. Do NOT use the device on slippery surfaces such as wet floors. 9. Do NOT use cell phones, microwaves or other devices that generate strong electrical or electromagnetic fields near the device. This may result in an operational failure. 10. Do NOT disassemble or try to modify the device. 11. If the device is used in a manner not specified within this manual, the protection provided by the device may be impaired. KEEP THESE INSTRUCTIONS IN A SAFE PLACE BEFORE YOU BEGIN Body Mass Index The Body Mass Index (BMI) is a number that is often called upon to evaluate body weight. BMI =

body weight (Kg)

(height(m)) BMI =

body weight (lb)703

(height(in)) Recommended Measurement Time To obtain an accurate reading, we recommend that you always take the measurement in the same environment and at the same time of day. Avoid taking measurements under the following conditions:

Immediately after a bath or exercise After drinking alcohol or a large amount of water Less than 2 hours after a meal If you take a measurement under any of the above conditions, the calculated body composition may be significantly different from the actual composition due to changes in water content in the body. Contents of the System Your new TD-2555G kit contains:

1. Weight Scale 2. Operating Instructions 3. Warranty Card 4. One Rechargeable Lithium-Ion Battery (HP14500) 5. One USB Type-C Cable SCALE OVERVIEW 1 2 Front 5 6 7 Back 10 3 4 8 9 1 2 3 4 5 LCD Screen Battery Indication Light Toe Position Heel Position Down Button 6 7 8 9 SET Button Up Button Battery Cover / Compartment Supporting Stand 10 USB Type-C Port SCREEN DISPLAY 4 3 2 1 9 8 7 5 6 1 2 3 4 5 Age Indicator BMI Indicator Gender Indicator 6 7 8 Weight Unit Measurement Result Volume Indicator /

Personal Profile Number 4G Signal Indicator Height Unit 9 Battery Indicator SETTING THE SCALE Before using the scale for the first time, input these settings. To ensure accuracy, make sure you complete the steps below and save the desired settings. Start with the scale off. Press SET to turn the scale on:

1. Select the personal profile number. Press or to select a number from P1 to P5. Press SET. 2. Enter the personal profile data. Press or to set the gender to male or female. Press SET. Press or to set the height unit to ft in or cm unit. Press SET. When the height unit is set to ft in, the unit of weight will be automatically set to pounds. When the height unit is set to cm, the unit of weight will be automatically set to kilograms. Press or to set the height between 3 3.5 and 7 2.5 / 100 cm and 220 cm. Press SET. Press or to set the age between 6 and 99. Press SET. Press or to set the voice language (English, Spanish or French). Press SET. Press or to set the voice volume. Press SET. 3. Press SET to exit the setting mode. If you make a mistake before finishing, repeat the steps from Select the personal profile number. NOTE:

Your settings are automatically saved when you exit the setting mode. TAKING MEASUREMENTS Before Measuring Place the scale on a hard, flat surface. Soft or uneven flooring (e.g. carpets, rugs) may cause the scale to give an inaccurate weight reading. Measurement must be taken with your feet dry and positioned correctly. Remove your shoes and socks before stepping onto the scale. Step onto the scale with your feet parallel to each other and your weight evenly distributed. Weigh yourself on the same scale at the same time every day, before breakfast or before getting dressed. NOTE:

When receiving the scale for the first time, or if you move the scale to a different location, press the SET button and quickly release to turn the scale on and wait for the LCD to display 0.0. Please wait 2 seconds then start the measurement. Measuring weight and Body Mass index (BMI) 1. Press SET or tap on the weighing platform to turn on the scale. The scale displays the profile setting of the last user. Press or to select the desired profile number. NOTE:

The scale will automatically turn on while stepping on it under standby mode. 2. Wait for 0.0 to appear on the display window. 3. Step onto the weighing platform. Stand still and make sure your weight is evenly distributed. Auto Switch-Off:

1. If the meter is idle for 30 seconds during the measuring mode, it will switch off automatically. 2. If the meter is idle for 3 minutes during the 4G transmission mode, it will switch off automatically. This device has been tested to meet the electrical and safety requirements of: IEC/EN 61010-1, IEC/EN 61326-1, EN 301 489-17. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 15.105(b) Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement:

1. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. For portable operation, this device has been tested and meets FCC RF exposure guidelines. When used with an accessory that contains metal may not ensure compliance with FCC RF exposure guidelines. Once a stable value is obtained, the reading will flash three times and then calculate your BMI. Recharging the Battery The USB adapter with a USB Type-C cable can be used when you need to recharge the Li-ion battery. To recharge the 3.7V Li-ion battery, please follow the procedures below:

Connect USB adapter to the scale 1. Connect the USB adapter and USB Type-C cable to the scale. 2. Plug the USB adapter into an electrical outlet. The battery indication light should turn red / orange. Remove USB adapter from the scale 1. When the battery indication light turns green, it means that the battery is fully charged. Remove the USB adapter from the electrical outlet. 2. Disconnect the USB Type-C cable from the scale. WARNING!

TD-2555G can ONLY use one 3.7V Lithium-ion rechargeable battery. Installing wrong types of batteries may cause explosions. USB adapter is not included in the kit, please make sure you have a USB adapter before charging. Cleaning To clean the outside of the scale, wipe it with a slightly damped cloth and water or a mild cleaning agent, and then dry the device with a soft dry cloth. Do NOT immerse 4. Understanding your displayed result. 1 2 1 2 6 the device in water. 3 4 3 7 5 1 2 3 4 Personal Profile Number Gender: Male Volume Your Weight 5 6 7 Weight Unit BMI Symbol Your BMI 5. Step off the weighing platform. The result is saved in the scale memory and the scale enters into 4G connection mode. 6. The 4G signal indicator will flash when it is in transmission mode. The three bars indicate the quality of the 4G signal:

- 1 bar: weak

- 3 bars: good When the bars are solid (not flashing), it means that the 4G transmission is established. The scale will turn off automatically when data transmission is complete, or left idle after 3 minutes. Do NOT use chemical or organic solvents to clean the scale. Wipe the scale clean at once if any grease, sauce, vinegar, juice or other substances that may cause damage are spilled on the scale. Scale Storage Storage condition: -13F to 158F (-25C to 70C), 10% to 93% relative humidity. Avoid dropping the scale or heavy impact. Avoid direct sunlight and high levels of humidity. SYSTEM TROUBLESHOOTING Error Messages MESSAGE WHAT IT MEANS WHAT TO DO The weighing subject exceeds the maximum capacity of the device. Remove the weighing subject from the platform to avoid damage. If you follow the recommended action but the problem persists, or if error messages other than the ones shown above appear, please contact local customer service. Do not attempt to repair the device by yourself and do not try to disassemble the scale under any circumstances. SYMBOL INFORMATION SYMBOL REFERENT SYMBOL REFERENT Manufacturer Caution Serial number Poor signal quality may affect the data transfer process. If the signal quality is poor, move the scale to a spot with better reception and try again. Make sure the scale is not close to or nearby a microwave, mobile devices, or any other devices that may interrupt the signal. SCALE MEMORY Your scale stores up to a 135 measurements for all 5 personal profiles. Results in memory can be transmitted to the mobile device by 4G connection. This allows you to review your measurements on your mobile device. MAINTENANCE Your scale uses one 3.7V Lithium-ion rechargeable battery SPECIFICATIONS General Information Model No. : TD-2555G Power Source : One 3.7V Lithium-ion rechargeable battery Dimensions & Weight : 340 (L) x 400 mm (W) x 32 mm (H), 3300g Size of LCD : 98 (L) x 92 (W) (mm) LCD : Backlit LCD Range :

Gender: Male / Female Height: 3 3.5 to 7 2.5 / 100 to 220 cm Age: 6 to 99 Weight: 8.8 to 550 lb / 4 to 250 kg Low Battery Signal The scale will display the message shown to alert you when the scale power is running low. This means it is about time to charge the battery of the scale. Operating Conditions : 41F to 104F (5 C to 40 C), 15% to 85% R.H. Storage Conditions : -13F to 158F (-25C to 70C), 10% to 93% R.H. Battery Life :

At least 180 measurements (3 minutes each time) or at least 3 months on standby. Power Supply Input: DC +5V/2A via Type-C cable Accuracy:

4.0 to 60.0 kg 0.3kg 60.1 to 250.0kg 0.5%

User Profile : 5 individuals Weight Unit : lb / kg Transmission : 4G Operating Altitude: Up to 2000m, for indoor use. Degree of Pollution: Pollution degree 2 Taidoc Technology Corporation B1-7F, No. 127, Wugong 2nd Rd., Wugu Dist., 24888 New Taipei City, Taiwan www.taidoc.com Read instructions before use.

FORA ZING Scale 550 Mobile TD-2555G Weight Scale / Bascula / Pese-personne GTIN

[sn]

IMEI SIM ID all Taidoc Technology Corporation B1-7F, No. 127, Wugong 2nd Rd., Wugu Dist., 24888 New Taipei City, Taiwan www.taidoc.com A Read instructions before use. / Lea las instrucciones antes de utilizarse. /

Lea las instrucciones antes de su uso. Battery / Bateria / Batterie: 3.7V === 1 x Li-ion Caution, consult accompanying documents. / Atenci6n, consulte los documentos adjuntos. /

Attention, voir notice d'instruction. FCC ID: TM72555GLTE 321-0099100-066

FCC, Request for non-disclosure Date: 16-Jul-10 RF_501, Issue 6 Page 1 of 1 Company Name: TAIDOC TECHNOLOGY CORP. Address: 6F, No.127, Wugong 2 Rd., Wugu Dist City: New Taipei City Country: Taiwan To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: TM72555GLTE Reference number: EF/2022/30008 Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

xX X] Operational Description [X] Schematic Diagrams XX] Tune-up Procedure

(s) of Material XX] Block Diagrams Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):

XX] Internal Photos [X} User's Manual 1] Test Set-up Photos XX] External Photos Planned Release Date STC: 180 days (notes 2, 3, 4, 5) a Date: 30/05/2022 Name and signature of applicant: Jim Jan Sp Oo, Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

RF_160, Issue 04 TaiDoc ASO A TAIN DH IRA Bl t

: rs +886-2-6625-8188 Q 9 @ TaiDoc Technology Corp. , Tak Fax: $886-2-6625-0288 Declaration of Authorization We Name: TAIDOC TECHNOLOGY CORP. Address: 6F, No.127, Wugong 2 Rd., Wugu Dist City: New Taipei City Country: Taiwan Declare that:

Name Representative of agent: Jim Chang Agent Company name: SGS Taiwan Ltd. Address: 134, Wu Kung Road, Wu ku Industrial Zone TW- New Taipei City 24803 City: New Taipei City Country: Taiwan is authorized to apply for Certification of the following product(s):

Product description: Weight scale Type designation: | TD-2555G Trademark: FORA TN'G Scale 550 Validity/ expiry date:

on our behalf Date: May 13, 2022 City: New Taipei City Name: Jim Jan Function: Project engineer Signature: ( bo (See

TaiDoc BSH BRIGADA IRA Bi | 6 oe

@y @ Y TaiDoc Technology Corp. Das iodine inde | | eS ee ee eee Declaration Date: May 13, 2022 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: TM72555GLTE We, TAIDOC TECHNOLOGY CORP., undersigned hereby declare that 1. the equipment operates on the paired 1755-1780 MHz (LTE B66) band must be capable of operating on all frequencies in the paired 1710-1780 MHz and 2110-2180 MHz band, using the same air interfaces that the equipment utilizes on any frequencies in the paired 1710-1780 MHz and 2110-2180 MHz band specified in r 27.5(h) and 27.75 of e-CFR Title 47. 2. Operating in 1755-1780 MHz (LTE B66) band are under the control of a base station as per e-CFR Title 47 27.1134. Signature: Sp JSxzn Name (Printed): Jim Jan Title: Project engineer On behalf of Company: TAIDOC TECHNOLOGY CORP. Telephone: +886266258188 Address: 6F, No.127, Wugong 2 Rd., Wugu Dist, New Taipei City, Taiwan