FCC ID: CASTPEH7F TP3300 Two Way Radio

T03-00312 series: Analog and DMR Tier 2 portable radios are elsewhere in this manual referred to as TP3300 T03-00313 series: Analog and DMR Tier 2 portable radios, with added GPS and BT functionality, are elsewhere in this manual referred to as TP3350 Safety warnings used in this guide ........................................... 20 Related documentation............................................................. 21 Package Contents .................................................................... 23 For your safety battery warning............................................. 24 Attaching labels to the radio or battery ..................................... 24 Charging the battery before first use ........................................ 25 Attaching the battery................................................................. 26 Removing the battery ............................................................... 26 Attaching the antenna............................................................... 27 Removing the antenna ............................................................. 27 Replacing the belt clip .............................................................. 27 Attaching an audio accessory................................................... 28 About your DMR digital radio.................................................... 30 About the radio controls............................................................ 32 Understanding the radio display ............................................... 34 Understanding the radio indicators........................................... 36 Using function keys to access frequently used features........... 38 Navigating the radios menus ................................................... 39 Turning the radio on and off ..................................................... 41 Adjusting the speaker volume .................................................. 42 Connecting to a Bluetooth device (TP3350 only) ................... 42 Answering a Call Alert .............................................................. 44 Selecting a zone ....................................................................... 45 Selecting a channel .................................................................. 45 Changing a Channel................................................................. 46 Making a group call .................................................................. 46 Making a private call................................................................. 47 Turning scanning on and off ..................................................... 47 Making a call alert..................................................................... 48 Sending a quick text message.................................................. 49 Sending an emergency alarm................................................... 51 Turning location information on and off (TP3350 only)............. 52 About the chargers ................................................................... 54 Before using the charger .......................................................... 54 Charging temperatures............................................................. 55 Leaving the battery on charge .................................................. 55 Receiving calls while charging.................................................. 56 Low battery warning ................................................................. 56 Charging a battery for the first time .......................................... 57 Charging a battery .................................................................... 57 LED behavior............................................................................ 58 Removing the battery from the charger .................................... 59 Maintaining battery life and performance ................................. 59 Storing batteries ....................................................................... 59 Disposing of batteries ............................................................... 60 About troubleshooting............................................................... 62 When your radio wont turn on.................................................. 62 Identifying the radios audible tones ......................................... 62 Viewing radio information ......................................................... 62 General care............................................................................. 63 All information contained in this document is the property of Tait International Limited. All rights reserved. This document may not, in whole or in part, be copied, photocopied, reproduced, translated, stored, or reduced to any electronic medium or machine-readable form, without prior written permission from Tait International Limited. The word TAIT and the TAIT logo are trademarks of Tait International Limited. All trade names referenced are the service mark, trademark or registered trademark of the respective manufacturers. There are no warranties extended or granted by this document. Tait International Limited accepts no responsibility for damage arising from use of the information contained in the document or of the equipment and software it describes. It is the responsibility of the user to ensure that use of such information, equipment and software complies with the laws, rules and regulations of the applicable jurisdictions. If you have any enquiries regarding this document, or any comments, suggestions and notifications of errors, please contact your regional Tait office. In the interests of improving the performance, reliability or servicing of the equipment, Tait International Limited reserves the right to update the equipment or this document or both without prior notice. This product may be protected by one or more patents or designs of Tait International Limited together with their international equivalents, pending patent or design applications, and registered trade marks. This product may also be made under license under one or more of the following patents:

- US7203207, AU2004246135, CA2527142, GB2418107, HK1082608, MY134526, US8306071

- US7339917, AU2004246136, CA2526926, GB2418812, MY134217

- US7499441, AU2005262626, CA2570441, GB2430333, JP4690397, NZ551231, KR100869043, RU2351080, BRP10512052, MXPA06015241

- US 7200129, AU2005226531, CA2558551, CN1930809, GB2429378, JP4351720, BRP10508671, NZ549124, KR848483, RU2321952 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc, and any use of such marks by Tait International Limited is under licence. Other trademarks and trade names are those of their respective owners. Tait International Limited is an environmentally responsible company which supports waste minimization, material recovery and restrictions in the use of hazardous materials. The European Unions Waste Electrical and Electronic Equipment (WEEE) Directive requires that this product be disposed of separately from the general waste stream when its service life is over. For more information about how to dispose of your unwanted Tait product, visit the Tait WEEE website at www.taitradio.com/weee. Please be environmentally responsible and dispose through the original supplier, or contact Tait International Limited. Tait International Limited also complies with the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive in the European Union. In China, we comply with the Measures for Administration of the Pollution Control of Electronic Information Products. We will comply with environmental requirements in other markets as they are introduced. Before using your radio, please read the following important safety and compliance information. For your own safety and to ensure you comply with the radio frequency (RF) exposure guidelines of the United States Federal Communication Commissions

(FCC), Industry Canada, and those from other administrations, please read the following information before using this radio. You should use this radio only for work-related purposes (it is not authorized for any other use) and if you are fully aware of, and can exercise control over, your exposure to RF energy. To prevent exceeding FCC RF exposure limits, you must control the amount and duration of RF that you and other people are exposed to. It is also important that you:

Do not remove the RF Exposure label from the radio. Ensure this RF exposure information accompa-

nies the radio when it is transferred to other users. Do not use the radio if you do not adhere to the guidelines on controlling your exposure to RF. This radio emits radio frequency (RF) energy or radio waves primarily when calls are made. RF is a form of electromagnetic energy (as is sunlight), and there are recommended levels of maximum RF exposure. To control your exposure to RF and comply with the maximum exposure limits for occupational/controlled environments, follow these guidelines:

Do not talk (transmit) on the radio more than the rated transmit duty cycle. This is important because the radio radiates more energy when it is transmitting than when it is receiving. When listening and talking on the radio, hold it upright in front of your face so that it is at least one inch (2.5 cm) away from any part of your face. Keeping the radio at the recommended distance is important because exposure to RF decreases rap-

idly the further away the antenna is from your body. Keep the antenna at least one inch (2.5 cm) from your face at all times. If you wear your radio, you must always put it in a carrying accessory carry accessory that has been specifically approved by Tait for this radio. Using non-approved body-worn accessories may mean you expose yourself to higher levels of RF than recommended by the FCCs occupational/con-

trolled environment RF exposure limits. Ensure you only use Tait-approved antennas, bat-

teries, and accessories. For more information on what RF energy is and how to control your exposure to it, visit the FCC website at www.fcc.gov/oet/rfsafety/rf-faqs.html. This two-way radio complies with these RF energy exposure standards and guidelines:

United States Federal Communications Commis-

sion, Code of Federal Regulations; 47 CFR 1.1307, 1.1310, and 2.1093. American National Standards Institute (ANSI) /

Institute of Electrical and Electronic Engineers

(IEEE) C95.1-2005. Institute of Electrical and Electronic Engineers

(IEEE) C95.1-2005 Edition. European Directive 2013/35/EU on minimum health and safety requirements regarding the exposure of workers to the risks arising from phys-

ical agents (electromagnetic fields). This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk to 50% listen. Cette radio metteur-rcepteur se conforme aux normes et aux rglements dexposition lnergie RF :

La Commission fdrale de la communication des Etats-Unis, Code de rglements fdraux (CFR) Titre 47 Sections 1.1307, 1.1310 et 2.1091 (radios mobiles) ou 2.1093 (radios portatives). American National Standards Institute (ANSI) /

Institute of Electrical and Electronic Engineers

(IEEE) C95. 1-2005. Institute of Electrical and Electronic Engineers

(IEEE) C95.1-2005 Edition. La directive europenne 2013/35/EU concernant les prescriptions minimales de scurit et de san-

t relatives l'exposition des travailleurs aux ris-

ques dus aux agents physiques (champs lectromagntiques). Cette radio se conforme aux limites dexposition de lIEEE (FCC) et ICNIRP pour les environnements dexposition au rayonnement RF professionnel et contrl aux cycles de marche de 50% en mode transmission et 50% en mode rception. Pour face vers le haut, 25 mm a t utilis pour le test, cet quipement doit tre install et utilis avec une distance minimale de 25 mm. Part 15 of the FCC Rules imposes RF emission limits on receivers. This radio complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is con-

nected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Innovation, Science and Economic Development Canada Compliance licence-

exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Innovation, Science and Economic Development Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Innovation, Science and Economic Development Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that, the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Innovation, Sciences et Dveloppement conomique Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. This product meets all ACMA regulatory requirements for electromagnetic compatibility (EMC). For more information about EMC compliance, visit the ACMA website at https://www.acma.gov.au/Industry/

Suppliers/Product-supply-and-compliance. AS/NZS 4365 deals with the use of frequencies in the 476.425 to 477.400 MHz band. Products capable of operating in this band have been approved for operation in the UHF Citizens Band Radio Service which is licensed in Australia by the ACMA Radiocommunications (Citizens Band Radio Stations) Class Licence and in New Zealand by the MED General User Radio Licence for Citizens Band Radio. Operation is subject to conditions contained within those licences. Repeaters operate by receiving a transmission on one channel and re-transmitting it on another. Operators are required to avoid using local repeater input channels, which will be in the range of 31 to 38, unless it is intended to use the repeater facility, and to avoid using local repeater output channels, which will be in the range 1 to 8, at any time. No voice transmissions are permitted on data channels 22 and 23. Equipment meeting this standard will inhibit voice operation on channels 22 and 23. In Australia:

Except in an emergency, a CB transmitter must not be operated on UHF channels 5 and 35. Channel 11 is the customary calling channel for establishing communications. Channel 40 is the customary road vehicle chan-

nel. In the European Community, radio and telecommunications equipment is regulated by the Radio Equipment Directive (2014/52/EU). The requirements of this directive include protection of health and safety of users, as well as electromagnetic compatibility. This product is an FM radio transceiver. It is intended for radiocommunication in the Private Mobile Radio

(PMR) or Public Access Mobile Radio (PAMR) services, to be used in all member states of the European Union (EU) and states within the European Economic Area (EEA). This product can be programmed to transmit on frequencies that are not harmonized throughout the EU/EEA, and will require a licence to operate in each member state. This product can be programmed for frequencies or emissions that may make its use illegal. Where applicable, a license must be obtained before this product is used. All license requirements must be observed. Limitations may apply to transmitter power, operating frequency, channel spacing, and emission. Simplified declarations of conformity appear on page 71 of this document. To download the formal declaration of conformity, go to www.taitradio.com/

eudoc. Some electronic devices may be prone to malfunction due to the lack of protection from RF energy that is present when your radio is transmitting. Examples of electronic devices that may be affected by RF energy are:

aircraft electronic systems vehicular electronic systems such as fuel injec-

tion, anti-skid brakes, and cruise control medical devices such as pacemakers and hearing aids medical equipment in hospitals or health care facilities. Switch off the radio before boarding an aircraft. Using your radio while in the air is not permitted. Consult the manufacturer (or its representative) of any such electronic devices to determine whether electronic circuits in those devices will perform normally when the radio is transmitting. If you have a pacemaker:

immediately turn off the radio if you suspect it is interfering with the pacemaker keep the radio at least 6 inches (15 cm) from the pacemaker while the radio is on use the radio on the side opposite to the pace-

maker to minimize interference never carry the radio in a breast pocket. If there is interference between your hearing aid and the radio, please discuss an alternative solution with the hearing aid manufacturer. Unless the radio is specifically certified for use in a potentially explosive atmosphere, do not take the radio into such an atmosphere. An explosion could cause serious injury or death. Examples of potentially explosive atmospheres include any environment where there are flammable liquids, gases, or dusts. Turn off the radio before approaching any area where you are instructed to turn off a two-way radio. Keep the radio away from airbags and airbag deployment areas. Do not install, charge, or place a radio near such areas. An activated airbag can propel a portable radio with sufficient force to cause serious injury to vehicle occupants. An airbag may not perform to specification if obstructed by a radio. To avoid damage to existing wiring, airbags, fuel tanks, fuel and brake lines, or battery cables, refer to the installation guide for the radio, and to the vehicle manufacturers manual, before installing electronic equipment in the vehicle. Using a handheld microphone or a radio while driving a vehicle may violate the laws and legislation that apply in your country or state. Please check the vehicle regulations in your area. In the European Community, radio equipment fitted to automotive vehicles is regulated by UNECE Regulation 10 Revision 5. The requirements of this regulation cover the electromagnetic compatibility of electrical or electronic equipment fitted to automotive vehicles. The radio is designed to satisfy the applicable compliance regulations. Do not make modifications or changes to the radio that are not expressly approved by Tait. Failure to do so could invalidate compliance requirements and void the users authority to operate the radio. Do not obstruct the vent hole on the battery or the vent hole on the radio chassis label. If the vent on the battery is obstructed, the battery may explode, causing personal injury and/or damage to property. If the vent on the radio is obstructed, audio quality and/

or key function may deteriorate and radio seals may be damaged. Tait recommends that you do not affix additional labels to the surfaces between the radio chassis and the battery. The fit between these surfaces is intentionally firm and any added thickness will damage the points of attachment between radio and battery. Do not obstruct the vent holes (see Warning above). Do not allow the paper label to extend beyond the recessed label area or to conceal relevant product information. A damaged battery can cause an explosion or fire, and can result in personal injury and/or property damage. To prevent personal injury and/or damage to property, read the important safety information supplied with the battery. Do not short-circuit the battery contacts, neither intentionally nor accidentally, e.g. by placing the battery with conductive materials such as keys or jewelry inside a pocket or container. Short-circuiting the battery contacts can heat up the conductive material and cause personal injury and/or damage to property. This section shows the menus and submenus that may be programmed for your radio (for radios with display only). Edit contact Delete contact View contact Forward Reply Frequency Slot Color code Tx contact Rx group list CTCSS Radio alias Radio ID Talk around Power level Squelch level Lone worker Backlight Day/night mode Brightness Keypad lock LED Tones Man down1 Encrypt Channel display mode Language Radio password Optional key VOX Keypad mode Vibration 1. TP3350 only This users guide provides information about the T03-00312 (TP3300) and T03-00313 (TP3350) T03-00302 (TP3300) and T03-00303 (TP3350) DMR conventional and analog portable radios. Both models are available with the following front panels:

display and 16 keys display and 4 keys no display and no keys These front panels are interchangeable. Contact your radio provide for more information. Bluetooth(page 42), GPS (page 52), and man-down features are only available in TP3350 portables. Mandown can operate in all signalling modes. The radio behavior described in this guide applies to radios with firmware version v1.01. If your radio does radios with the firmware current at date of publication. not operate as you expect, contact your radio provider If your radio does not operate as you expect, contact for assistance. your radio provider for assistance. Please follow exactly any instruction that appears in the text as an alert. An alert provides necessary safety information as well as instruction in the proper use of the product. This users guide uses the following types of alert:

This alert is used when there is a hazardous situation which, if not avoided, could result in death or serious injury. This alert is used when there is a hazardous situation which, if not avoided, could result in minor or moderate injury. This alert is used to highlight information that is required to ensure procedures are performed correctly. Incorrectly performed procedures could result in equipment damage or malfunction. This icon is used to draw your attention to information that may improve your understanding of the equipment or procedure. The following documentation is also available for your Tait radio, which you can access from the Tait Technical Support website

(http://support.taitradio.com):

Safety and Compliance Informationsupplied with each radio. (The same information is included in this users guide.) Li-ion Battery Safety Informationsupplied with each Li-ion battery. Once you have unpacked your radio, there are a few tasks you must do before you can use it. The most important of these is to charge your battery for the first time allow 2.5 hours for this. Do not charge the battery or change the antenna in a hazardous location. An explosion could cause serious injury or death. Package Contents For your safety battery warning Attaching labels to the radio or battery Charging the battery before first use Attaching the battery Removing the battery Attaching the antenna Removing the antenna Replacing the belt clip Attaching an audio accessory Your TP3 package contains the following items:

Radio Antenna(s) Battery(s) Battery Charger Multi-National Plug Pack Belt Clip Safety and Compliance documents This radio uses a Lithium-ion battery. If the battery is damaged or handled in an unsafe manner, it can cause personal injury and/or damage to property. Read the important safety information included with your battery. The radio has recesses to attach labels to the front

(not for 16-key radio), both sides and the rear. Please contact your Tait dealer for pre-printed, customized labels. Do not cover the battery vent hole or the vent hole on the radio chassis. If the vent on the battery is obstructed, the battery may explode, causing personal injury and/or damage to property. If the vent on the radio is obstructed, audio quality and/or key function may deteriorate and radio seals may be damaged. Tait recommends that you do not affix additional labels to the surfaces between the radio chassis and the battery. The fit between these surfaces is intentionally firm and any added thickness will damage the points of attachment between radio and battery. Before using your battery for the first time, you must charge it. Follow the instructions included with your Tait charger. This information is repeated in the section "Charging and caring for batteries" on page 53. For best charging performance, switch off the radio before placing it in the charger. Rotate the power/volume control switch counterclockwise to turn off the radio. If the battery has been attached while the radio is turned on, turn the radio off and then on again before use. Insert the top of the battery into the recess at the back of the chassis. Lightly press the bottom of the battery towards the radio until the battery catch clicks. Make sure that the battery is firmly in position. The battery is secured to the radio by a battery catch in the radios rear panel. To remove the battery from the radio, so that the battery can be charged or replaced:

Rotate the power/volume control switch counterclockwise to turn off the radio. If the battery has been removed while the radio is turned on, turn the radio off and then on again before use. Push the to release the battery catch, and pull the battery away from the radio. button at the bottom of the radio Before using the radio, screw the antenna clockwise into the antenna connector. The antenna should be screwed sufficiently tight so that it doesnt unscrew easily. This is important as it creates a seal. Do not change the antenna in a hazardous location. An explosion could cause serious injury or death. Use a firm grip and turn the antenna counterclockwise half a turn. Use a lighter grip to fully unscrew the antenna, and carefully remove it. To remove the belt clip, use a Pozidrive screwdriver to undo the two belt clip screws. To attach the belt clip, use a Pozidrive screwdriver to fasten the two belt clip screws. Audio accessories plug into the radios accessory connector. The accessory connector is protected by a cover, which needs to be removed before an accessory can be installed. The accessory cover protects the accessory connector from electrostatic discharge. Keep the cover in place unless the connector is in use. To remove the accessory cover and install an audio accessory:

Use a coin or other blunt object to loosen the screw that secures the accessory cover to the radio. Remove the accessory cover and store it in a safe place. Plug the accessory into the accessory connector. Tighten the screw. Once the radio has recognized the accessory, the will appear. accessory icon This section gives an overview of your DMR radio, describes the radios controls and indicators, and explains how the radio menus are organized. About your DMR digital radio About the radio controls Understanding the radio display Understanding the radio indicators Using function keys to access frequently used fea-

tures Navigating the radios menus Your DMR digital radio can be programmed for DMR conventional. Analog conventional operation is also available. You may notice differences between digital and analog calls in terms of:

static noise in low signal areas, and radio coverage in marginal reception areas. On digital networks there is no static noise, even in low signal areas. This lack of static is because your digital radio removes the noise from the call, so that you hear only clear voice. With digital networks, a call remains clear and then drops off quickly at the border of a coverage area. The reason for this is that a digital call is either received or it isn't. With analog networks, the background noise in a call gets progressively worse when you are in fringe areas or even slightly outside normal coverage areas. On analog channels, your radio may be programmed so that you hear all conversations on a channel, or your user group may be segregated from other user groups by using special signaling. The special signaling is used to control the muting and unmuting of your radio, so that your radio is muted when other user groups are talking and unmuted for members of your user group. There are two muting controls that operate in your radio:

signaling mute squelch The radios signaling mute only allows the radio to unmute if the incoming call carries the tones specific to your user group. Your user group may use tones that are either audible, subaudible or both. The radios squelch allows the radio to unmute only when the strength of the incoming signal is above a predetermined threshold. This means that only signals of reasonable intelligibility are made audible. The radio controls are the PTT key, power/volume control, channel selector, scroll keys, selection keys, and function keys. Some keys have functions assigned to both short and long key presses:

a short key press is less than one second, and a long key press is more than one second. The radio controls and their functions are described in the following sections. channel selector function key 1

(emergency key) PTT key

(press-to-talk) function key 2 function key 3 left selection key function key 4 power / volume control status LED speaker /

microphone display scroll keys right selection key function key 5 alphanumeric keys PTT key Power/volume control Channel selector Left and right selection keys Scroll keys Press and hold to transmit and release to listen Rotate to turn the radio on and change the speaker volume Select and change channels Action determined by the text above the selection key Scroll up and down through a list of menu options, scroll left and right in messages, or access a pre-programmed menu Function keys Programmed for frequently used options Alphanumeric keys Used to enter letters and numbers The messages and icons you see on your radio display depend on the mode in which your radio is operating and the way it is programmed. These are some of the icons you may see on your radio display:

No signal. Signal strength indicator: the more bars, the stronger the signal being received by the radio Battery indicator: shows how much charge is available in the battery. Bluetooth: The Bluetooth feature is enabled but there is no remote Bluetooth device connected. Bluetooth connected: The Bluetooth feature is enabled. The icon stays lit when one or more remote Bluetooth devices are connected. Scanning: your radio is monitoring a group of channels or workgroups for activity. Scan land on: Scan feature is enabled. Encryption: Encryption is turned on. GPS available: GPS is turned on. The icon stays lit when a position fix is available. GPS not available/out of range: GPS is turned on. The icon stays lit when a position fix is available. Accessories connected. High-power transmit: Your radio is set to transmit on high power. Low-power transmit: Your radio is set to transmit on low power. Direct mode (talkaround mode). In repeater mode no icon is shown. Unread message. VOX enabled. Speaker open. Private Call Indicates a Private Call in progress. In the Contacts list, it indicates a subscriber alias (name) or ID (number). Bluetooth Audio Device Bluetooth-enabled audio device, such as a headset. Item sent successfully. Long-press the # key to switch input method between:

lowercase uppercase numeric The status LED indicator and the radios audible tonestogether with the radio displayall combine to give you information about the state of your radio. The most common way the indicators work is described in the following sections. The way these indicators behave may be affected by the way your radio is programmed. status LED Red On: The radio is transmitting. Flashing: The battery is low. Green On: The radio is receiving, or detecting activity over the air. Orange On: The radio is powering up. Flashing: The Radio is scanning, or in selective call, or emergency state. Your radio may be programmed to be silent, which means you may not hear any alerts. The radio uses audible tones to alert you to its status:

Radio controls and keypress tonesthe tones and beeps you hear when you press your radios keys or use the controls. Incoming call tonewhen the radio is receiving a call. Warning toneswhen there is an error, or the bat-

tery is low, for example. Your radio may be programmed to play a pre-

recorded message for start-up channel when changing the channel for the battery condition The function keys provide access to some of the features you will use most often. These features are assigned to the function keys when the radio is programmed. Some keys may have a feature associated with both a short key press and a long key press. function key 1

(emergency key) function key 2 function key 3 function key 4 function key 5 F1 F2 F3 F4 F5 Use the following table to record the function keys programmed for your radio:

For more information about the function keys that can be programmed on your radio, contact your radio provider. Radios with display have a number of menus, each containing lists or submenus. The menus available depend on the way your radio is programmed. See also "Menu map" on page 19. To access the menu, press the left selection key appears above it. whenever Use the scroll keys to move through the menu list. When the menu you want is highlighted, press

(left selection key). To go back one level, press

(right selection key). This section describes the basic operation of your radio. Connecting to a Bluetooth device (TP3350 only) Turning the radio on and off Adjusting the speaker volume Selecting a zone Selecting a channel Making a group call Making a private call Turning scanning on and off Making a call alert Sending a quick text message Sending an emergency alarm Turning location information on and off

(TP3350 only) Rotate the On/Off/Volume control switch clockwise until you hear a click. You see a welcome message or welcome image. The LED lights up solid orange and the Home screen lights up if the backlight setting is set to turn on automatically. To turn off the radio, rotate the switch counterclockwise until you hear a click. You see a brief on the radios display. Your radio may not turn on if your battery is very low. (See "Low battery warning" on page 56.) Your radio may be automatically locked each time it is powered-up. Power up the radio. Enter your current six-digit password with the radio keypad. The display shows ******. You hear a positive indicator tone for every digit pressed. Press the right selection key to remove the each *

on the display. Press the left selection key to proceed. If the password is correct, your radio proceeds to power up. If the password is incorrect, the display shows

. Repeat step 2. Rotate the power/volume control clockwise to increase the speaker volume and counterclockwise to decrease the volume. The volume control also changes the volume level of the radios audible indicators. You may be able to connect a Bluetooth device to your radio. Bluetooth devices may operate with Tait radios, provided they:

are compatible with the Bluetooth Specification Version 2.0 or higher. Tait recommends Bluetooth Specification Version 2.1 or higher. include Bluetooth Headset Profile (HSP) adopted version 1.1 or 1.2, or Bluetooth Handsfree Profile

(HFP) version 1.5 or 1.6. Place the headset on your ear. Depending on which ear you are going to wear the headset, simply adjust the ear hook accordingly. To get the best performance from your headset:

Do not block the devices internal antenna (see the devices user documentation). The human body can interfere with a Bluetooth signal. If you usually use your radio with your right hand, wear the headset on your right ear. Avoid coming in contact with the internal antenna of a headset or radio. Before attempting to connect a device, Tait recommends that the device is fully charged. Refer to the documentation of your Bluetooth device for charging instructions. Pairing creates a unique and encrypted wireless link between the radio, and the Bluetooth device. To use a device with your radio, they must first be paired. When you connect to a Bluetooth device for the first time, you need to instruct the radio to search for compatible devices using Bluetooth wireless technology. The search should take less than one minute. Do not turn off your Bluetooth device or press the right selection key during the finding and connecting operation as this cancels the operation. A pin code may be required to be programmed in your radio before it can pair with some devices. Contact your dealer for more information. Turn on your Bluetooth device and place it in pairing mode. Refer to the documentation of your Bluetooth device. and On your radio, press

. select Select

. If you cannot see setting.

, turn on the Scroll to the required device and press

. You can also use available devices. to locate Select

. The display shows Your Bluetooth device may require additional steps to complete the pairing. Refer to the documentation of your Bluetooth-enabled device. If successful, the radio display shows

. A tone sounds and appears beside the connected device. The Bluetooth Connected icon appears on the status bar, or if unsuccessful, the radio display shows

. Turn on your Bluetooth device and place it in pairing mode. Refer to the documentation of your Bluetooth device. On your radio, press the function key programmed for

. A tone sounds and the LED blinks orange. Your Bluetooth device may require additional steps to complete the pairing. Refer to the documentation of your Bluetooth device. If successful, a positive tone sounds, or if unsuccessful, a negative indicator tone sounds. 16-key and 4-key radios:

To answer a call alert on your radio, select View then press and hold the PTT button. A zone is a group of channels. The 16-key and 4-key radios support up to 2000 channels and 250 zones, with a maximum of 160 channels per zone. The non-keypad radio supports up to 32 channels and two zones, with a maximum of 16 channels per zone. Press the function key programmed for Zone. or Press and select

. The selected zone is indicated by a

. Scroll to the required zone and press

. Press the function key programmed for Zone. You hear a positive indicator tone, indicating the radio has switched from Zone 1 to Zone 2. or You hear a negative indicator tone, indicating the radio has switched from Zone 2 to Zone 1. Once the required zone is displayed (if you have multiple zones in your radio), turn the channel selector to select the channel. To use the quick channel change method simply dial the channel you would like to use. e.g. - dial 502 to move to channel 502. Turn the channel selector to select the channel with the active group alias or ID. Hold the radio vertically one to two inches (2.5 to 5 cm) from your mouth. Press the PTT key to make the call. The LED lights up solid red and the Group Call icon appears. The first text line shows the group call alias. Wait for the Talk Permit tone to finish (if enabled) and speak clearly into the microphone, or wait for the PTT side tone to finish (if enabled) and speak clearly into the microphone. Release the PTT key to listen. When the called radio responds, the LED lights up green. You see the Group Call icon

, the group alias or ID, and transmitting radio alias or ID on your display. Your radio may be programmed to create a short alert tone the moment the target radio releases the PTT key, indicating the channel is free for you to respond. Press the PTT key to respond. or If there is no voice activity for a predetermined period of time, the call ends. The radio returns to the screen you were on prior to initiating the call. Turn the channel selector to select the channel with the active subscriber alias or ID. Hold the radio vertically one to two inches (2.5 to 5 cm) from your mouth. Press the PTT key to make the call. The LED lights up red. The Private Call icon appears. The first text line shows the subscriber alias. The second text line displays the call status. Wait for the Talk Permit tone to finish (if enabled) and speak clearly into the microphone. Release the PTT key to listen. When the target radio responds, the LED lights up green. Your radio may be programmed to create a short alert tone the moment the target radio releases the PTT key, indicating the channel is free for you to respond. Press the PTT key to respond. or If there is no voice activity for a predetermined period of time, the call ends. You hear a short tone. The display shows

. Press the function key programmed to turn scan on and off. or Press and select

. Select or

. If you cannot turn on scanning, select a scan list

). first (

During scan, the LED flashes orange and the Scan icon is displayed. Press the function key programmed to turn scan on or off. During scan, the LED flashes orange. Press the function key programmed to make a call alert to the predefined ID. or Press and select Scroll to required contact and press Select and or (for 16-key radio only) Press and select

. Enter the subscriber ID you want to page and press

. In the select menu

. The display shows the subscriber alias or ID, indicating that the call alert has been sent. and The LED flashes red when your radio is sending the call alert. If the call alert acknowledgement is received, the display briefly shows If the call alert acknowledgement is not received, the display briefly shows Press the function key programmed to make a call alert to the predefined contact. The LED flashes when your radio is sending the call alert. If the Call Alert acknowledgement is received, two chirps sound. or If the Call Alert acknowledgement is not received, a low-pitched tone sounds. or or Press the function key programmed to send a pre-

defined quick text message to a predefined con-

tact. Press the function key programmed to open the function. Go to step 2 below. Press and select

Scroll to the required quick text and press

. Use the keypad to edit the message, if required. a. Press to move to the left. b. Press to move to the right. c. Press the key to delete any unwanted characters. d. Press the key to input one space to the right. e. Long-press the key to switch between lowercase, upperacase and numeric input. Press

. You can also press the right selectyion key to quit the operation. Press

. You can also press in the drafts. Select and then press

. to save the message

, scroll to the required contact or Select and press The display shows flashes red. end enter the subscriber ID

. and the LED If the message is sent, a tone sounds and the display or If the message is not sent, a low tone sounds and the display shows Press the function key programmed to open the Quick Text function. Go to step 2 below. or Press and select

Scroll to the required quick text and press

. Scroll to the required contact and press

. The display shows flashes red. and the LED If the message is sent, a tone sounds and the display or If the message is not sent, a low tone sounds and the display shows Press the function key programmed to send a pre-

defined quick text message to a predefined ID. The LED flashes red. Two chirps indicate that the message has been sent, or a low-pitched tone indicates that the message cannot be sent. If your radio is set to silent, it will not display any audio or visual indicators during Emergency mode. Press the function key programmed for emer-

gency. The display shows alias. The LED blinks red and the Emergency icon appears. and the destination The radio will send an emergency telegram. You can now press PTT to make an emergency call, and receive by releasing PTT. After a call hang time, the radio return to its normal working state. or or The radio will send an emergency telegram and then transmit voice from the microphone for a preset time. And then goes back to normal working state. Then the radio return to its normal working state Your radio may be enabled to send location information. Press and select

. Select and select on or off. When GPS is turned on, the GPS icon appear. Once a GPS signal is available, the GPS icon will change to will

. Press the function key programmed for GPS to turn GPS on or off. If turned on, a positive tone sounds. If turned off, a negative tone sounds. This section describes how to charge your Tait radio battery as well as care for it, to ensure safe operation, maximum performance and prolonged battery life. About the chargers Before using the charger Before using the charger Charging temperatures Leaving the battery on charge Receiving calls while charging Low battery warning Charging a battery for the first time Charging a battery LED behavior Removing the battery from the charger Maintaining battery life and performance Storing batteries Disposing of batteries Unless otherwise indicated, the charging advice and instructions in this document apply to all chargers. The following chargers are available for your Tait radios and batteries:

T03-00322-xxxx Desktop charger Check the battery label and charger label to see if the charger is compatible with the battery. See also

"About the chargers" on page 54. Handle the battery safely. Failure to observe the following handling recommendations could result in personal injury and/or equipment damage. Before using a Li-ion battery, read the Li-ion Bat-

tery Safety Information (MPC-00006-xx) included with your battery, and follow the instructions it pro-

vides. Incorrect use of a Li-ion battery can cause explosion or fire. Do not short-circuit the battery contacts, neither intentionally nor accidentally, e.g. by placing the battery with conductive materials such as keys or jewelry inside a pocket or container. Short-circuit-

ing the battery contacts can heat up the conduc-

tive material. Do not obstruct the vent hole(s) on the battery. If the vent on the battery is obstructed the battery may explode, causing personal injury and/or equipment damage. If the vent on the radio is obstructed, audio quality and/or key function may deteriorate and radio seals may be damaged. Turn the radio off before removing the battery, and turn it on again after attaching the battery. This ensures that the radio powers down and up correctly. Failing to follow this procedure may require the radio to be turned off then on again to operate correctly. Do not expose a battery to very high or very low temperatures for extended periods of time. Doing so will shorten the usable life (service life) of the battery. To achieve the best results when charging your battery:

Before you begin to charge your battery, make sure that the battery temperature is close to the room temperature in which the battery is to be charged. If possible, charge the battery in temperatures between 50 F and 77 F (between 10 C and 25 C). This temperature range is the optimal charging range. Charging only starts when the battery is between 32 F to 104 F (0 C to 40 C). When the battery temperature is outside the normal charging range, the orange LED on the charger is lit. Charging will start or resume once the temperature is within normal limits, and no action is required by you. You can leave a battery/radio in the charger once charging is complete. Leaving a battery in the charger will not overcharge or damage it. You can remove a battery/radio from the charger at any time without harming the battery, the radio, or the charger. When you return the battery/radio to the charger, charging is automatically resumed. For best charging performance, switch off the radio before placing it in the charger. You can receive a call while the radio is in the charger, but your radio performance may be degraded. If you do remove the radio from the charger to answer a call, the call will not be disrupted. Removing the radio from the charger to make or receive a call ends the charging process. Charging safely recommences when the radio is reinserted into the charger. Do not allow a radio battery to fully discharge every time you use it, or you will shorten the service life of the battery. When the battery is low, your radio warns you in the following ways:

The battery symbol on the radio display looks empty. The status LED on the radio slowly flashes red. A high-pitched beep sounds. You should recharge or replace the battery as soon as possible. Fully charge a battery before using it for the first time. The red LED stays lit while the battery charges. For best charging performance, switch off the radio before placing it in the charger. Desktop charger: Connect the charger to the correct Tait power adaptor. 6-way charger: Power on the charger. Initially, all three LEDs are lit for 2 seconds. Place just a battery in the charger, or a radio with a battery attached (desktop charger or 6-way charger only). There is no need to remove a belt clip, antenna, or any accessory that is attached to the accessory connector. The red LED lights up, and stays lit while the battery charges. When charging is complete, the green LED stays lit. If there is a battery in the charger when power is supplied to the charger, the LEDs behave as follows:

The charger has been connected to a power supply. The battery is charging. steady Charging complete. Remove the battery, or leave it in the charger. The battery temperature is outside the nor-

mal charging range. Charging will start or resume once the temperature is within nor-

mal limits. No action is required by you. There is a fault. Contact your dealer. If the LEDs for all charger slots continuously flash orange, or red then orange, the charger itself may be faulty. Contact your dealer. briefly steady steady or flashing all off There is a fault. Contact your dealer. If the charger does not behave as expected:

Make sure the radio or battery is seated properly in the charger. Check that the charger is properly plugged into the originally supplied power supply. Check that the battery and charger contacts are clean. To clean, wipe the contacts with a dry lint-

free cloth to remove any dirt, oil or grease. Lift the battery/radio out of the charger. You can remove a battery/radio from the charger at any time without harming the battery, the radio, or the charger. When you return the battery/radio to the charger, charging is automatically resumed. You can also leave a battery/radio in the charger once charging is complete. With proper care and maintenance you will maintain the performance and life of the battery. It is recommended that you:

Use only Tait chargers and batteries. Do not expose a battery to very high or very low temperatures for extended periods of time. Doing so will shorten the service life of the battery. Very high: above 140 F (60 C) Very low: less than 4 F (20 C) Charge the battery at a room temperature of between 50 F and 77 F (between 10 C and 25 C). This temperature range is the optimal charging range. Wipe excess moisture and dirt from the radio, radio contacts and battery contacts before charg-

ing the battery. Store batteries properly when not in use. See "Storing batteries". When not in use for a month or more, batteries should be stored correctly to prolong their life. Remove the battery from the radio before storage. Fully charge the battery if storing for less than one month. Charge batteries to about 30% if storing for longer than one month. Store in a cool dry place. Batteries that have been stored for any length of time must be charged before being used. See "Charging a battery for the first time" on page 57. Run the battery flat before disposing of it. When disposing of the battery, be sure to do so in an environmentally sensitive manner. Please contact your radio provider for information on recycling programs in your area. See "Environmental responsibilities" on page 6 for more information. This section describes troubleshooting procedures, and basic maintenance. About troubleshooting When your radio wont turn on Identifying the radios audible tones Viewing radio information General care If you are experiencing difficulty operating your radio, you may find the following sections helpful. Consult your radio provider for assistance, if necessary. If the LED on your radio does not glow red when the radio is turned on, it is probable that power is not reaching the radio. Check the following:

Is the battery firmly attached to the radio?

Is the battery sufficiently charged?

Is the battery charger working properly?

If all appears to be in order, but your radio still fails to operate properly, contact your radio provider for further assistance. The radios audible tones can help you identify a potential problem. See "Audible tones" on page 37. Your radio provider may ask you for the hardware and firmware version of your radio, for troubleshooting purposes. Use the menu to view information such as the hardware and firmware version of your radio, the radio serial number, and various radio identities. Press and select

. Scroll to the radio information you want to view. Your radio requires no regular maintenance other than ensuring that the battery has sufficient charge and that no damage has occurred to the antenna or the battery. To prevent permanent damage to the radio case, do not allow the radio to come into contact with detergents, alcohol, aerosol sprays, or petroleum-

based products. For general battery care, see "Maintaining battery life and performance" on page 59. Do not scratch or scrape the contacts of the battery. If necessary, wipe the contacts of the battery with a dry, lint-free cloth to remove any dirt, oil or grease. If you need to clean the radio case, use a cloth dampened with clean water. Do not immerse the radio in fluids. This Software License Agreement

("Agreement") is between you

(Licensee) and Tait International Limited (Tait"). By using any of the Software items embedded and pre-loaded in the related Tait Designated Product, included on CD, downloaded from the Tait website, or provided in any other form, you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, do not install or use any of the Software. If you install or use any of the Software, that will be deemed to be acceptance of the terms of this Agreement. For good and valuable consideration, the parties agree as follows:

Confidential Information means all or any information supplied to or received by Licensee from Tait, whether before or after installation or use and whether directly or indirectly pertaining to the Software and Documentation supplied by Tait, including without limitation all information relating to the Designated Products, hardware, software;

copyright, design registrations, trademarks; operations, processes, and related business affairs of Tait;

and including any other goods or property supplied by Tait to Licensee pursuant to the terms of this Agreement. means products provided by Tait to Licensee with which or for which the Software and Documentation is licensed for use. means product and software documentation that specifies technical and performance features and capabilities; user, operation, and training manuals for the Software; and all physical or electronic media upon which such information is provided. means Software in a form that can be run in a computer and typically refers to machine language, which is comprised of native instructions the computer carries out in hardware. Executable code may also refer to programs written in interpreted languages that require additional software to actually execute. and mean the following or their substantial equivalents or counterparts, recognized by or through action before any governmental authority in any jurisdiction throughout the world and including, but not limited to all rights in patents, patent applications, inventions, copyrights, trademarks, trade secrets, trade names, and other proprietary rights in or relating to the Software and Documentation;

including any adaptations, corrections, de-compilations, disassemblies, emulations, enhancements fixes, modifications, translations and updates to or derivative works from, the Software or Documentation, whether made by Tait or another party, or any improvements that result from Tait processes or, provision of information services. means any individual or entity that has accepted the terms of this License. means software with freely obtainable source code and license for modification, or permission for free distribution. means the terms or conditions under which the Open Source Software is licensed. means any individual, partnership, corporation, association, joint stock company, trust, joint venture, limited liability company, governmental authority, sole proprietorship, or other form of legal entity recognized by a governmental authority. means any flaw or weakness in system security procedures, design, implementation, or internal controls that if exercised

(accidentally triggered or intentionally exploited) could result in a security breach such that data is compromised, manipulated, or stolen, or a system is damaged.

(i) means proprietary software in executable code format, and adaptations, translations, de-

compilations, disassemblies, emulations, or derivative works of such software; (ii) means any modifications, new versions and new releases of the software provided by Tait; (iii) means any upgrades, enhancements or other functions or features to the Software provided by Tait; and (iv) may contain one or more items of software owned by a third-

party supplier. The term "Software"

includes the applicable Software Key and does not include any third-party software provided under separate license or not licensable under the terms of this Agreement. means software expressed in human readable language necessary for understanding, maintaining, modifying, correcting, and enhancing any software referred to in this Agreement and includes all states of that software prior to its compilation into an executable programme. means a code or key that is supplied by Tait to access, enable and use the Software or certain functions or features of the Software. means Tait International Limited and includes its Affiliates. This Agreement contains the terms and conditions of the license Tait is providing to Licensee, and of Licensees use of the Software and Documentation. Tait and Licensee enter into this Agreement in connection with Tait delivery of certain proprietary Software and/or products containing embedded or pre-loaded proprietary Software. 3.1. Subject to the provisions of this Agreement and the payment of applicable license fees, Tait grants to Licensee a personal, limited, non-

transferable (except as permitted in Section 7), and non-exclusive license to use the Software in executable code form, and the Documentation, solely in connection with Licensee's use of the Designated Products for the useful life of the Designated Products. This Agreement does not grant any rights to source code. 3.2. The Licensee acknowledges that one or more Software Keys may be required from Tait for the Software or certain functions or features of the Software. The Licensee may only access, enable and use such Software or functions or features of the Software with Software Keys issued by Tait. Tait may provide the Licensee with a Software Key for the Software or certain functions or features of the Software agreed to by the parties as part of this Agreement. The Software Key may control the functions or features of the Software licensed in accordance with this Agreement. The Licensees license to the Software Key is limited to a license to use the Software Key only to access, enable and use the Software or certain functions or features of the Software that Tait has agreed to provide to the Licensee and only in accordance with the Documentation. 3.3. If the Software licensed under this Agreement contains or is derived from Open Source Software, the terms and conditions governing the use of such Open Source Software are in the Open Source Software Licenses of the copyright owner and not in this Agreement. If there is a conflict between the terms and conditions of this Agreement and the terms and conditions of the any applicable Open Source Software Licenses, the terms and conditions of the Open Source Software Licenses will take precedence. For information about Open Source Components contained in Tait products and the related Open Source licenses, see:

https://www.taitradio.com/

opensource 4.1. Licensee may use the Software only for Licensee's internal business purposes and only in accordance with the Documentation. Any other use of the Software is strictly prohibited. Without limiting the general nature of these restrictions, Licensee will not make the Software available for use by third parties on a "time sharing,"

"application service provider," "service bureau" basis, or for any other similar commercial rental or sharing arrangement. 4.2. Licensee will not, and will not directly or indirectly allow or enable any third party to: (i) reverse engineer, disassemble, extract components, decompile, reprogram, or otherwise reduce the Software or any portion thereof to a human perceptible form or otherwise attempt to recreate the source code; (ii) modify, adapt, create derivative works of, or merge the Software; (iii) copy, reproduce, distribute, lend, or lease the Software or Documentation to any third party;

(iv) grant any sublicense or other rights in the Software or Documentation to any third party; (v) take any action that would cause the Software or Documentation to be placed in the public domain; (vi) remove, or in any way alter or obscure any copyright notice or other notice of Tait or third-

party licensors proprietary rights; (vii) provide, copy, transmit, disclose, divulge or make the Software or Documentation available to, or permit the use of the Software by, any third party or on any machine except as expressly authorized by this Agreement; or (viii) use, or permit the use of, the Software in a manner that would result in the production of a copy of the Software by any means whatsoever other than what is permitted in this Agreement. Licensee may make one copy of the Software to be used solely for archival, back-up, or disaster recovery purposes; provided that Licensee may not operate that copy of the Software at the same time as the original Software is being operated. Licensee may make as many copies of the Documentation as it may reasonably require for the internal use of the Software. 4.3. Unless otherwise authorized by Tait in writing, Licensee will not, and will not enable or allow any third party to: (i) install a copy of the Software on more than one unit of a Designated Product; or (ii) copy or transfer Software installed on one unit of a Designated Product to any other device. Licensee may temporarily transfer Software installed on a Designated Product to another device if the Designated Product is inoperable or malfunctioning. Temporary transfer of the Software to another device must be discontinued when the original Designated Product is returned to operation and the Software must be removed from the other device. 4.4. Licensee will maintain, during the term of this Agreement and for a period of two years thereafter, accurate records relating to this license grant to verify compliance with this Agreement. Tait, or a third party nominated by Tait, may inspect Licensees premises, books and records, upon reasonable prior notice to Licensee, during Licensees normal business hours and subject to Licensee's facility and security regulations. Tait is responsible for the payment of all expenses and costs of the inspection, provided that Licensee shall indemnify Tait for all costs

(including audit costs and legal costs on a solicitor client basis) if Licensee has breached the terms of this Agreement. Any information obtained by Tait during the course of the inspection will be kept in strict confidence by Tait and used solely for the purpose of verifying Licensee's compliance with the terms of this Agreement. Tait, its licensors, and its suppliers retain all of their Intellectual Property Rights in and to the Software and Documentation, in any form. No rights are granted to Licensee under this Agreement by implication, estoppel or otherwise, except for those rights which are expressly granted to Licensee in this Agreement. All Intellectual Property developed, originated, or prepared by Tait in connection with providing the Software, Designated Products, Documentation, or related services, remains vested exclusively in Tait, and Licensee will not have any shared development or other Intellectual Property Rights. 6.1. The commencement date and the term of the Software warranty will be a period of one (1) year from Tait shipment of the Software. If Licensee is not in breach of any obligations under this Agreement, Tait warrants that the unmodified Software, when used properly and in accordance with the Documentation and this Agreement, will be free from a reproducible defect that eliminates the functionality or successful operation of a feature critical to the primary functionality or successful operation of the Software. Whether a defect has occurred will be determined solely by Tait. Tait does not warrant that Licensees use of the Software or the Designated Products will be uninterrupted, error-free, completely free of Security Vulnerabilities, or that the Software or the Designated Products will meet Licensees particular requirements. Tait makes no representations or warranties with respect to any third-party software included in the Software. 6.2 Tait sole obligation to Licensee, and Licensees exclusive remedy under this warranty, is to use reasonable efforts to remedy any material Software defect covered by this warranty. These efforts will involve either replacing the media or attempting to correct significant, demonstrable program or documentation errors or Security Vulnerabilities. If Tait cannot correct the defect within a reasonable time, then at Tait option, Tait will replace the defective Software with functionally equivalent Software, license to Licensee substitute Software which will accomplish the same objective, or terminate the license and refund Licensees paid license fee. If Tait investigation of the perceived defect reveals that no such defect in fact exists, Tait may recover its costs in respect of such investigation from Licensee. 6.3. Tait disclaims any and all other warranties relating to the Software or Documentation other than the express warranties set forth in this Section 6. Warranties in Section 6 are in lieu of all other warranties whether express or implied, oral or written, and including without limitation any and all implied warranties of condition, title, non-

infringement, merchantability, or fitness for a particular purpose or use by Licensee (whether Tait knows, has reason to know, has been advised of, or is otherwise aware of any such purpose or use), whether arising by law, by reason of custom or usage of trade, or by course of dealing. In addition, Tait disclaims any warranty to any person other than Licensee with respect to the Software or Documentation. 7.1. Licensee will not transfer the Software or Documentation to any third party without specific prior written consent from Tait. Tait may withhold such consent or at its own discretion make the consent conditional upon the transferee paying applicable license fees and agreeing to be bound by this Agreement. 7.2. In the case of a value-added reseller or distributor of Tait Designated Products, the consent referred to in Section 7.1 may be contained in a Tait Reseller or Tait Distributor Agreement. 7.3. If the Designated Products are Tait vehicle-mounted mobile products or hand-carried portable radio products and Licensee transfers ownership of the Tait mobile or portable radio products to a third party, Licensee may assign its right to use the Software which is embedded in or furnished for use with the radio products and the related Documentation; provided that Licensee transfers all copies of the Software and Documentation to the transferee. 7.4. 7.4.For the avoidance of any doubt, Section 7.3 excludes TaitNet Infrastructure, or the products listed at any time under network products at:

http://www.taitradio.com. 7.5. If Licensee, as a contractor or subcontractor (integrator), is purchasing Tait Designated Products and licensing Software not for its own internal use but for end use only by a Customer, the Licensee may transfer such Software, but only if a) Licensee transfers all copies of such Software and the related Documentation to the transferee and b) Licensee has first obtained from its Customer (and, if Licensee is acting as a subcontractor, from the interim transferee(s) and from the ultimate end user sub license) an enforceable sublicense agreement that prohibits any other transfer and that contains restrictions substantially identical to the terms set forth in this Software License Agreement. Except as stated in the foregoing, Licensee and any transferee(s) authorised by this Section may not otherwise transfer or make available any Tait Software to any third party nor permit any party to do so. Licensee will, on request, make available evidence reasonably satisfactory to Tait demonstrating compliance with all the foregoing. 8.1. Licensees right to use the Software and Documentation will commence when the Designated Products are supplied by Tait to Licensee and will continue for the life of the Designated Products with which or for which the Software and Documentation are supplied, unless Licensee breaches this Agreement, in which case this Agreement and Licensee's right to use the Software and Documentation may be terminated immediately upon notice by Tait. 8.2. Within thirty (30) days after termination of this Agreement, Licensee must certify in writing to Tait that all copies of the Software have been removed or deleted from the Designated Products and that all copies of the Software and Documentation have been returned to Tait or destroyed by Licensee and are no longer in use by Licensee. 8.3. Licensee acknowledges that Tait made a considerable investment of resources in the development, marketing, and distribution of the Software and Documentation and that Licensee's breach of this Agreement will result in irreparable harm to Tait for which monetary damages would be inadequate. If Licensee breaches this Agreement, Tait may terminate this Agreement and be entitled to all available remedies at law or in equity including immediate injunctive relief and repossession of all non-

embedded Software and associated Documentation. Licensee shall pay all Tait costs (on an indemnity basis) for the enforcement of the terms of this Agreement. Licensee acknowledges that the Software and Documentation contain proprietary and Confidential Information valuable to Tait and are Tait trade secrets, and Licensee agrees to respect the confidentiality of the information contained in the Software and Documentation. 10.1. In no circumstances shall Tait be under any liability to Licensee, or any other person whatsoever, whether in Tort (including negligence), Contract

(except as expressly provided in this Agreement), Equity, under any Statute, or otherwise at law for any losses or damages whether general, special, exemplary, punitive, direct, indirect, or consequential arising out of or in connection with any use or inability of using the Software. 10.2. Licensees sole remedy against Tait will be limited to breach of contract and Tait sole and total liability for any such claim shall be limited at the option of Tait to the repair or replacement of the Software or the refund of the purchase price of the Software. 11.1. COPYRIGHT NOTICES. The existence of a copyright notice on the Software will not be construed as an admission or presumption of publication of the Software or public disclosure of any trade secrets associated with the Software. 11.2. COMPLIANCE WITH LAWS. Licensee acknowledges that the Software may be subject to the laws and regulations of the jurisdiction covering the supply of the Designated Products and will comply with all applicable laws and regulations, including export laws and regulations, of that country. 11.3. ASSIGNMENTS AND SUBCONTRACTING. Tait may assign its rights or subcontract its obligations under this Agreement, or encumber or sell its rights in any Software, without prior notice to, or consent of, Licensee. 11.4. GOVERNING LAW. This Agreement shall be subject to and construed in accordance with New Zealand law and disputes between the parties concerning the provisions hereof shall be determined by the New Zealand Courts of Law. Provided however Tait may at its election bring proceedings for breach of the terms hereof or for the enforcement of any judgment in relation to a breach of the terms hereof in any jurisdiction Tait considers fit for the purpose of ensuring compliance with the terms hereof or obtaining relief for breach of the terms hereof. remaining terms which shall remain in full force and effect as if such part or parts held to be illegal or void had not been included in this Agreement. Tait may replace the invalid or unenforceable provision with a valid and enforceable provision that achieves the original intent and economic effect of this Agreement. 11.11 CONSUMER GUARANTEES. Licensee acknowledges that the licenses supplied in terms of this agreement are supplied to Licensee in business, and that the guarantees and other provisions of prevailing consumer protection legislation shall not apply. 11.12 WHOLE AGREEMENT. Licensee acknowledges that it has read this Agreement, understands it and agrees to be bound by its terms and conditions. Licensee also agrees that, subject only to the express terms of any other agreement between Tait and Licensee to the contrary, this is the complete and exclusive statement of the Agreement between it and Tait in relation to the Software. This Agreement supersedes any proposal or prior agreement, oral or written, and any other communications between Licensee and Tait relating to the Software and the Designated Products. 11.5. THIRD-PARTY BENEFICIARIES. This Agreement is entered into solely for the benefit of Tait and Licensee. No third party has the right to make any claim or assert any right under this Agreement, and no third party is deemed a beneficiary of this Agreement. Notwithstanding the foregoing, any licensor or supplier of third-party software included in the Software will be a direct and intended third-party beneficiary of this Agreement. 11.6. SURVIVAL. Sections 4, 5, 6.3, 7, 8, 9, 10, and 11 survive the termination of this Agreement. 11.7. ORDER OF PRECEDENCE. In the event of inconsistencies between this Agreement and any other Agreement between the parties, the parties agree that, with respect to the specific subject matter of this Agreement, this Agreement prevails. 11.8 SECURITY. Tait uses reasonable means in the design and writing of its own Software and the acquisition of third-party Software in order to limit Security Vulnerabilities. While no software can be guaranteed to be free from Security Vulnerabilities, if a Security Vulnerability is discovered, Tait will take the steps specified in Section 6 of this Agreement. 11.9 EXPORT. Licensee will not transfer, directly or indirectly, any Designated Product, Documentation or Software furnished hereunder or the direct product of such Documentation or Software to any country for which New Zealand or any other applicable country requires an export license or other governmental approval without first obtaining such license or approval. 11.10 SEVERABILITY. In the event that any part or parts of this Agreement shall be held illegal or null and void by any court or administrative body of competent jurisdiction, such determination shall not affect the EN BG ES CS DA ET EL FR HR IT LV LT HU FI SV MT NL PL PT RO SK SL

To3-00312-HC A HWU-4 sone 3300- H7 SN: LC215210001 Type Code(MI/N)/HVIN: TPEH7F FCC ID: CASTPEH7F IC: 737A-TPEH7F Tait International Limited PO Box 1645, Christchurch, NZ 8140 Made in China ATTENTION: Restricted to occupational use to satisfy exposure limits. h , See product documentation for operation requirements C UK vv, CA te XL en 703-00312-HBAA HWU-4 oP 3300- H7 SN: LC215210001 Type Code(MIN)/HVIN: TPEH7F FCC ID: CASTPEH7F IC: 737A-TPEH7F Tait International Limited PO Box 1645, Christchurch, NZ 8140 Made in China ATTENTION: Restricted to occupational use to satisfy exposure limits. See product documentation for operation requirements 4 703-00312-HAAA = HWU-4 one 3300-H7 SN: LC215210001 Type Code(MIN)/HVIN: TPEH7F FCC ID: CASTPEH7F IC: 737A-TPEH7F Tait International Limited PO Box 1645, Christchurch, NZ 8140 Made in China ATTENTION: Restricted to occupational use to satisfy exposure limits. See product documentation for operation requirements

Tait International Limited Address: 245 Wooldridge Road, Harewood, P.O. Box 1645 Christchurch 8051 New Zealand Tel: 64 3 358 0403 E-mail: brian.emmett@taitradio.com DECLARATION OF SIMILARITY Date: 2022-2-9 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, Tait International Limited , hereby declare that the product: TP3300 Two Way Radio, FCC ID: CASTPEH7F. model: T03-00312-HAAA, T03-00312-HABA, T03-00312-HACA, T03-00312-HADA, T03-00312-HAEA, T03-00312-HAFA, T03-00312-HAGA, T03-00312-HAHA, T03-00312-HAAB, T03-00312-HABB, T03-00312-HACB, T03-00312-HADB, T03-00312-HAEB, T03-00312-HAFB, T03-00312-HAGB, T03-00312-HAHB, T03-00312-HBAA, T03-00312-HBBA, T03-00312-HBCA, T03-00312-HBDA, T03-00312-HBEA, T03-00312-HBFA, T03-00312-HBGA, T03-00312-HBHA, T03-00312-HBAB, T03-00312-HBBB, T03-00312-HBCB, T03-00312-HBDB, T03-00312-HBEB, T03-00312-HBFB, T03-00312-HBGB, T03-00312-HBHB, T03-00312-HCBA, T03-00312-HCCA, T03-00312-HCDA, T03-00312-HCEA, T03-00312-HCFA, T03-00312-HCGA, T03-00312-HCHA, T03-00312-HCAB, T03-00312-HCBB, T03-00312-HCCB, T03-00312-HCDB, T03-00312-HCEB, T03-00312-HCFB, T03-00312-HCGB, T03-00312-HCHB are electrically identical with the model:T03-00312-HCAA,which was tested by China Certification ICT Co.,Ltd

(Dongguan) with the same electromagnetic emissions and electromagnetic compatibility characteristics. A description of the differences among Forty eight models and that are declared similar are as follows:

Tait radio in this series are generally numbed as follows. T03-00312-HXXX for the Non-Smart model. The final three letters in the part code refer to the following T03-00312-HXXX Selection of the User-Interface A = O-Key, No Display B = 4-Key, Display C = 16-Key, Display T03-00312-HXXX Selection of the Color of the Radio cover A = Black B = Orange C = Green D = Gray E = White F = Red G = Yellow H = Pink T03-00312-HXXX Selection of the radio brand name A = Tait Communications B = Harris The Type approval testing as also covered the designs with any of the fitted keypad types (0-Key, 4-key and 16-key) T03-00312-XAXX and T03-00312-XBXX and T03-00312-XCXX 1 | P a g e Since there is no difference in the radio performance for any of the colors or brand names we declare the following radio models to all be equivalent:

Tait Name Type Code (M/N)/HVIN FCC ID IC

= TP3300-H7

= TPEH7F

= CASTPEH7F

= 737A-TPEH7F 0-Key T03-00312-HAAA T03-00312-HABA T03-00312-HACA T03-00312-HADA T03-00312-HAEA T03-00312-HAFA T03-00312-HAGA T03-00312-HAHA T03-00312-HAAB T03-00312-HABB T03-00312-HACB T03-00312-HADB T03-00312-HAEB T03-00312-HAFB T03-00312-HAGB T03-00312-HAHB 4-Key, Display T03-00312-HBAA T03-00312-HBBA T03-00312-HBCA T03-00312-HBDA T03-00312-HBEA T03-00312-HBFA T03-00312-HBGA T03-00312-HBHA T03-00312-HBAB T03-00312-HBBB T03-00312-HBCB T03-00312-HBDB T03-00312-HBEB T03-00312-HBFB T03-00312-HBGB T03-00312-HBHB 16-Key, Display T03-00312-HCAA T03-00312-HCBA T03-00312-HCCA T03-00312-HCDA T03-00312-HCEA T03-00312-HCFA T03-00312-HCGA T03-00312-HCHA T03-00312-HCAB T03-00312-HCBB T03-00312-HCCB T03-00312-HCDB T03-00312-HCEB T03-00312-HCFB T03-00312-HCGB T03-00312-HCHB The detail information, please check the reports. Sincerely, Printed Name: Brian Emmett Title: Standards and Regulatory Manager 2 | P a g e

Tait International Limited Add: 245 Wooldridge Road, Harewood, P.O. Box 1645 Christchurch 8051 New Zealand Tel:64 3 358 0403 Email:brian.emmett@taitradio.com FCC Confidential Authorization Date: 2022-2-9 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: CASTPEH7F In accordance with Sections 0.457 and 0.459 of the Commissions Rules, (Tait International Limited) hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description Parts List/Tune up procedure (for licensed devices) The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Printed Name: Brian Emmett Title: Standards and Regulatory Manager QA-FR-171-A

Tait International Limited Add: 245 Wooldridge Road, Harewood, P.O. Box 1645 Christchurch 8051 New Zealand Tel:64 3 358 0403 Email:brian.emmett@taitradio.com FCC Authorization Date: 2022-2-9 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, Tait International Limited, Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd

(Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Clients signature Printed Name: Brian Emmett Title: Standards and Regulatory Manager QA-FR-170-B

Tait International Limited Add: 245 Wooldridge Road, Harewood, P.O. Box 1645 Christchurch 8051 New Zealand Tel:64 3 358 0403 Email:brian.emmett@taitradio.com Date: 2022-2-9 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Extended Frequencies Justification for Certification of Transmitter with FCC ID: CASTPEH7F Dear Sir/Madam, This transmitter was designed to operate in following frequency ranges: 450-520MHz To aid equipment authorization in other countries which accept the United States FCC Grant for Certification, Tait International Limited is requesting that the FCC lists the frequencies 450-520MHz, under FCC Rule Parts 22, 74 and 90 on the FCC Grant. Tait International Limited attests that the TP3300 Two Way Radio will not be marketed to USA users with the frequency band which is not allowed by the rule Parts 22, 74 and 90. Per the FCCs KDB634817guidance, as an alternative to listing the exact frequencies, we acknowledge that its a violation of the FCC Rules if this device operates on unauthorized frequencies. Frequency Range(MHz) FCC Rule Part FCC Part 74/ FCC Part 90 450-454 FCC Part 22 454-455 FCC Part 74 455-456 FCC Part 22/ FCC Part 90 456-460 FCC Part 90 460-462.5375 For Federal 462.5375-462.7375 FCC Part 90 462.7375-467.5375 For Federal 467.5375-467.7375 FCC Part 90 467.7375-470 FCC Part 22/ FCC Part 74/ FCC Part 90 470-512 512-520 For Federal Also, equipment programming is the responsibility of Authorized Service Personnel, the TP3300 Two Way Radio complies with 47 CFR Part 90.203(e), in that the operator cannot directly program the transmit frequencies using the normally accessible external controls. Please contact me if you require any additional information. Sincerely Yours, Signature:

Printed Name: Brian Emmett Title: Standards and Regulatory Manager

Tait International Limited Add: 245 Wooldridge Road, Harewood, P.O. Box 1645 Christchurch 8051 New Zealand Tel:64 3 358 0403 Email:brian.emmett@taitradio.com Justification Letter Date: 2022-2-9 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: CASTPEH7F Model number: T03-00312-HAAA, T03-00312-HABA, T03-00312-HACA, T03-00312-HADA, T03-00312-HAEA, T03-00312-HAFA, T03-00312-HAGA, T03-00312-HAHA, T03-00312-HAAB, T03-00312-HABB, T03-00312-HACB, T03-00312-HADB, T03-00312-HAEB, T03-00312-HAFB, T03-00312-HAGB, T03-00312-HAHB, T03-00312-HBAA, T03-00312-HBBA, T03-00312-HBCA, T03-00312-HBDA, T03-00312-HBEA, T03-00312-HBFA, T03-00312-HBGA, T03-00312-HBHA, T03-00312-HBAB, T03-00312-HBBB, T03-00312-HBCB, T03-00312-HBDB, T03-00312-HBEB, T03-00312-HBFB, T03-00312-HBGB, T03-00312-HBHB, T03-00312-HCAA, T03-00312-HCBA, T03-00312-HCCA, T03-00312-HCDA, T03-00312-HCEA, T03-00312-HCFA, T03-00312-HCGA, T03-00312-HCHA, T03-00312-HCAB, T03-00312-HCBB, T03-00312-HCCB, T03-00312-HCDB, T03-00312-HCEB, T03-00312-HCFB, T03-00312-HCGB, T03-00312-HCHB Dear Sir/Madam, We, Tait International Limited, acknowledge that this device will not be marketed to USA users with the frequency band which is not allowed by rule part 90.and it is a violation of FCC rules if this device is operated on unauthorized frequencies inside the U.S.A. This equipment meets the requirements of the FCC Rules, Parts 90.203(e) and (g), as applicable. Programming of this products transmit frequencies can be performed ONLY by the manufacturer or by service or by maintenance personal. The operator cant program transmit frequencies using the equipments external operation controls. This is to certify that the requirements of 47 CFR Part 90.203(j)(4) and (5) spectrum efficiency are met by the Tait International Limited as demonstrated by the tests conducted on the sample radio provided. The tests show that the 4FSK data rate is in accordance with ETSI TS 102 361-1, that is 9600 bits per second in a 12.5 kHz bandwidth to satisfy the data rate requirement of 4800 bits per second per 6.25 kHz of channel bandwidth (7K60F1D emissions). Additionally the TP3300 Two Way Radio uses the AMBE+2 half-rate vocoder to compress 60 ms of normal bursts are sent in alternate 30 ms TDMA slots and so comply with the equivalence of one voice channel per 6.25 kHz bandwidth (7K60F1E emission). Additionally the radio meets the requirement of one voice channel per 12.5 kHz of channel bandwidth for analogue speech (11k0F3E emission). Sincerely Yours, Signature:

Printed Name: Brian Emmett Title: Standards and Regulatory Manager