FCC ID: CASTPEHGG Two Way Radio

TP3300/TP3350 DMR Conventional Portable Radios Users Guide MPE-00001-04 Issue 4 August 2021 User Guide Cross Reference T03-00312 series: Analog and DMR Tier 2 portable radios are elsewhere in this manual referred to as TP3300 T03-00313 series: Analog and DMR Tier 2 portable radios, with added GPS and BT functionality, are elsewhere in this manual referred to as TP3350 Contents For your safety..................................................................7 Menu map........................................................................19 1 About this guide .............................................................20 Safety warnings used in this guide ........................................... 20 Related documentation............................................................. 21 2 Before using your radio .................................................22 Package Contents .................................................................... 23 For your safety battery warning............................................. 24 Attaching labels to the radio or battery ..................................... 24 Charging the battery before first use ........................................ 25 Attaching the battery................................................................. 26 Removing the battery ............................................................... 26 Attaching the antenna............................................................... 27 Removing the antenna ............................................................. 27 Replacing the belt clip .............................................................. 27 Attaching an audio accessory................................................... 28 3 Getting started ................................................................29 About your DMR digital radio.................................................... 30 About the radio controls............................................................ 32 Understanding the radio display ............................................... 34 Understanding the radio indicators........................................... 36 Using function keys to access frequently used features........... 38 Navigating the radios menus ................................................... 39 4 Operation.........................................................................40 Turning the radio on and off ..................................................... 41 Adjusting the speaker volume .................................................. 42 Connecting to a Bluetooth device (TP3350 only) ................... 42 Answering a Call Alert .............................................................. 44 Selecting a zone ....................................................................... 45 Selecting a channel .................................................................. 45 Changing a Channel................................................................. 46 Making a group call .................................................................. 46 Making a private call................................................................. 47 Turning scanning on and off ..................................................... 47 Making a call alert..................................................................... 48 Sending a quick text message.................................................. 49 Sending an emergency alarm................................................... 51 Turning location information on and off (TP3350 only)............. 52 5 Charging and caring for batteries.................................53 Contents 3 About the chargers ................................................................... 54 Before using the charger .......................................................... 54 Charging temperatures............................................................. 55 Leaving the battery on charge .................................................. 55 Receiving calls while charging.................................................. 56 Low battery warning ................................................................. 56 Charging a battery for the first time .......................................... 57 Charging a battery .................................................................... 57 LED behavior............................................................................ 58 Removing the battery from the charger .................................... 59 Maintaining battery life and performance ................................. 59 Storing batteries ....................................................................... 59 Disposing of batteries ............................................................... 60 6 Troubleshooting .............................................................61 About troubleshooting............................................................... 62 When your radio wont turn on.................................................. 62 Identifying the radios audible tones ......................................... 62 Viewing radio information ......................................................... 62 General care............................................................................. 63 Tait Software Licence Agreement.................................64 Simplified Declaration of Conformity ...........................71 4 Contents Copyright and trademarks All information contained in this document is the property of Tait International Limited. All rights reserved. This document may not, in whole or in part, be copied, photocopied, reproduced, translated, stored, or reduced to any electronic medium or machine-readable form, without prior written permission from Tait International Limited. The word TAIT and the TAIT logo are trademarks of Tait International Limited. All trade names referenced are the service mark, trademark or registered trademark of the respective manufacturers. Disclaimer There are no warranties extended or granted by this document. Tait International Limited accepts no responsibility for damage arising from use of the information contained in the document or of the equipment and software it describes. It is the responsibility of the user to ensure that use of such information, equipment and software complies with the laws, rules and regulations of the applicable jurisdictions. Enquiries and comments If you have any enquiries regarding this document, or any comments, suggestions and notifications of errors, please contact your regional Tait office. Updates of manual and equipment In the interests of improving the performance, reliability or servicing of the equipment, Tait International Limited reserves the right to update the equipment or this document or both without prior notice. Intellectual property rights This product may be protected by one or more patents or designs of Tait International Limited together with their international equivalents, pending patent or design applications, and registered trade marks. This product may also be made under license under one or more of the following patents:

- US7203207, AU2004246135, CA2527142, GB2418107, HK1082608, MY134526, US8306071

- US7339917, AU2004246136, CA2526926, GB2418812, MY134217

- US7499441, AU2005262626, CA2570441, GB2430333, JP4690397, NZ551231, KR100869043, RU2351080, 5 BRP10512052, MXPA06015241

- US 7200129, AU2005226531, CA2558551, CN1930809, GB2429378, JP4351720, BRP10508671, NZ549124, KR848483, RU2321952 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc, and any use of such marks by Tait International Limited is under licence. Other trademarks and trade names are those of their respective owners. Environmental responsibilities Tait International Limited is an environmentally responsible company which supports waste minimization, material recovery and restrictions in the use of hazardous materials. The European Unions Waste Electrical and Electronic Equipment (WEEE) Directive requires that this product be disposed of separately from the general waste stream when its service life is over. For more information about how to dispose of your unwanted Tait product, visit the Tait WEEE website at www.taitradio.com/weee. Please be environmentally responsible and dispose through the original supplier, or contact Tait International Limited. Tait International Limited also complies with the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive in the European Union. In China, we comply with the Measures for Administration of the Pollution Control of Electronic Information Products. We will comply with environmental requirements in other markets as they are introduced. 6 For your safety Before using your radio, please read the following important safety and compliance information. Radio frequency exposure information For your own safety and to ensure you comply with the radio frequency (RF) exposure guidelines of the United States Federal Communication Commissions

(FCC), Industry Canada, and those from other administrations, please read the following information before using this radio. Using this radio You should use this radio only for work-related purposes (it is not authorized for any other use) and if you are fully aware of, and can exercise control over, your exposure to RF energy. To prevent exceeding FCC RF exposure limits, you must control the amount and duration of RF that you and other people are exposed to. It is also important that you:

Do not remove the RF Exposure label from the radio. Ensure this RF exposure information accompa-

nies the radio when it is transferred to other users. Do not use the radio if you do not adhere to the guidelines on controlling your exposure to RF. Controlling your exposure to RF energy This radio emits radio frequency (RF) energy or radio waves primarily when calls are made. RF is a form of electromagnetic energy (as is sunlight), and there are recommended levels of maximum RF exposure. To control your exposure to RF and comply with the maximum exposure limits for occupational/controlled environments, follow these guidelines:

For your safety 7 Do not talk (transmit) on the radio more than the rated transmit duty cycle. This is important because the radio radiates more energy when it is transmitting than when it is receiving. When listening and talking on the radio, hold it upright in front of your face so that it is at least one inch (2.5 cm) away from any part of your face. Keeping the radio at the recommended distance is important because exposure to RF decreases rap-

idly the further away the antenna is from your body. Keep the antenna at least one inch (2.5 cm) from your face at all times. If you wear your radio, you must always put it in a carrying accessory carry accessory that has been specifically approved by Tait for this radio. Using non-approved body-worn accessories may mean you expose yourself to higher levels of RF than recommended by the FCCs occupational/con-

trolled environment RF exposure limits. Ensure you only use Tait-approved antennas, bat-

teries, and accessories. For more information on what RF energy is and how to control your exposure to it, visit the FCC website at www.fcc.gov/oet/rfsafety/rf-faqs.html. Compliance with RF energy exposure standards This two-way radio complies with these RF energy exposure standards and guidelines:

United States Federal Communications Commis-

sion, Code of Federal Regulations; 47 CFR 1.1307, 1.1310, and 2.1093. American National Standards Institute (ANSI) /

Institute of Electrical and Electronic Engineers

(IEEE) C95.1-2005. Institute of Electrical and Electronic Engineers

(IEEE) C95.1-2005 Edition. 8 For your safety European Directive 2013/35/EU on minimum health and safety requirements regarding the exposure of workers to the risks arising from phys-

ical agents (electromagnetic fields). This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk to 50% listen. Conformit aux normes dexposition lnergie RF Cette radio metteur-rcepteur se conforme aux normes et aux rglements dexposition lnergie RF :

La Commission fdrale de la communication des Etats-Unis, Code de rglements fdraux (CFR) Titre 47 Sections 1.1307, 1.1310 et 2.1091 (radios mobiles) ou 2.1093 (radios portatives). American National Standards Institute (ANSI) /

Institute of Electrical and Electronic Engineers

(IEEE) C95. 1-2005. Institute of Electrical and Electronic Engineers

(IEEE) C95.1-2005 Edition. La directive europenne 2013/35/EU concernant les prescriptions minimales de scurit et de san-

t relatives l'exposition des travailleurs aux ris-

ques dus aux agents physiques (champs lectromagntiques). Cette radio se conforme aux limites dexposition de lIEEE (FCC) et ICNIRP pour les environnements dexposition au rayonnement RF professionnel et contrl aux cycles de marche de 50% en mode transmission et 50% en mode rception. For your safety 9 Radio frequency emissions limits in the USA CFR Title 47 Part 15.19 (a) (1) - Receivers Part 15 of the FCC Rules imposes RF emission limits on receivers. This radio complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. CFR Title 47 Part 15.19 (a) (3) - All other devices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is con-

nected. Consult the dealer or an experienced radio/TV technician for help. 10 For your safety Radio frequency emissions limits in Canada ISEDC RSS warning This device complies with Innovation, Science and Economic Development Canada Compliance licence-

exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Innovation, Science and Economic Development Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Innovation, Science and Economic Development Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that, the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Innovation, Sciences et Dveloppement conomique Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. For your safety 11 Any Changes expressly or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. Tout changement expressment ou toute modification non approuve par la partie responsable de la conformit pourrait annuler l'autorit de l'utilisateur utiliser l'quipement. SAR tests are conducted using standard operating positions accepted by the ISEDC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model device is a available for sale to the public, it must be tested and certified to the ISEDC that it does not exceed the exposure limit established by the ISEDC, Tests for each device are performed in positions and locations (worn on the body)as required by the ISEDC. For face-up, 25mm was used for test, this equipment should be installed and operated with minimum distance 25mm. For body worn operation, this device has been tested and meets the ISEDC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that Contains no metal. Non-compliance with the above restrictions may result in violation of RF exposure guidelines. Les tests SAR sont effectus en utilisant des positions de fonctionnement standard acceptes par la ISEDC avec l'appareil transmettant son niveau de puissance certifi le plus lev dans toutes les bandes de frquences testes, bien que le SAR soit dtermin au niveau de puissance certifi le plus lev, le niveau SAR rel de l'appareil tout en fonctionnement peut tre bien en de? de la valeur maximale. Avant qu'un nouveau modle d'appareil soit disponible la vente au public, il doit tre test et certifi par la ISEDC qu'il ne dpasse pas la limite d'exposition tablie par la ISEDC. Des tests pour chaque appareil sont effectus dans des positions et des emplacements (port sur le corps) comme requis par la ISEDC. Pour face vers le haut, 25 mm a t utilis pour le test, cet quipement doit tre install et utilis avec une distance minimale de 25 mm. Pour un fonctionnement port sur le corps, cet appareil a t test et rpond aux directives d'exposition RF FCC/ISEDC lorsqu'il est utilis avec un accessoire con?u pour ce produit ou lorsqu'il est utilis avec un accessoire qui ne contient pas de mtal. Le non-respect des restrictions ci-dessus peut entra?ner une violation des directives d'exposition aux RF. 12 For your safety EMC regulatory compliance in Australia This product meets all ACMA regulatory requirements for electromagnetic compatibility (EMC). For more information about EMC compliance, visit the ACMA website at https://www.acma.gov.au/Industry/

Suppliers/Product-supply-and-compliance. Australia and New Zealand citizens band (476.4 to 477.4 MHz) AS/NZS 4365 deals with the use of frequencies in the 476.425 to 477.400 MHz band. Products capable of operating in this band have been approved for operation in the UHF Citizens Band Radio Service which is licensed in Australia by the ACMA Radiocommunications (Citizens Band Radio Stations) Class Licence and in New Zealand by the MED General User Radio Licence for Citizens Band Radio. Operation is subject to conditions contained within those licences. Repeaters operate by receiving a transmission on one channel and re-transmitting it on another. Operators are required to avoid using local repeater input channels, which will be in the range of 31 to 38, unless it is intended to use the repeater facility, and to avoid using local repeater output channels, which will be in the range 1 to 8, at any time. No voice transmissions are permitted on data channels 22 and 23. Equipment meeting this standard will inhibit voice operation on channels 22 and 23. In Australia:

Except in an emergency, a CB transmitter must not be operated on UHF channels 5 and 35. Channel 11 is the customary calling channel for establishing communications. For your safety 13 Channel 40 is the customary road vehicle chan-

nel. Health, safety and electromagnetic compatibility in Europe In the European Community, radio and telecommunications equipment is regulated by the Radio Equipment Directive (2014/52/EU). The requirements of this directive include protection of health and safety of users, as well as electromagnetic compatibility. Intended purpose of product This product is an FM radio transceiver. It is intended for radiocommunication in the Private Mobile Radio

(PMR) or Public Access Mobile Radio (PAMR) services, to be used in all member states of the European Union (EU) and states within the European Economic Area (EEA). Restrictions This product can be programmed to transmit on frequencies that are not harmonized throughout the EU/EEA, and will require a licence to operate in each member state. This product can be programmed for frequencies or emissions that may make its use illegal. Where applicable, a license must be obtained before this product is used. All license requirements must be observed. Limitations may apply to transmitter power, operating frequency, channel spacing, and emission. Declaration of conformity Simplified declarations of conformity appear on page 71 of this document. To download the formal declaration of conformity, go to www.taitradio.com/

eudoc. 14 For your safety Interference with electronic devices Warning Some electronic devices may be prone to malfunction due to the lack of protection from RF energy that is present when your radio is transmitting. Examples of electronic devices that may be affected by RF energy are:

aircraft electronic systems vehicular electronic systems such as fuel injec-

tion, anti-skid brakes, and cruise control medical devices such as pacemakers and hearing aids medical equipment in hospitals or health care facilities. Switch off the radio before boarding an aircraft. Using your radio while in the air is not permitted. Consult the manufacturer (or its representative) of any such electronic devices to determine whether electronic circuits in those devices will perform normally when the radio is transmitting. Warning If you have a pacemaker:

immediately turn off the radio if you suspect it is interfering with the pacemaker keep the radio at least 6 inches (15 cm) from the pacemaker while the radio is on use the radio on the side opposite to the pace-

maker to minimize interference never carry the radio in a breast pocket. If there is interference between your hearing aid and the radio, please discuss an alternative solution with the hearing aid manufacturer. For your safety 15 Potentially explosive atmospheres and blasting areas Warning Unless the radio is specifically certified for use in a potentially explosive atmosphere, do not take the radio into such an atmosphere. An explosion could cause serious injury or death. Examples of potentially explosive atmospheres include any environment where there are flammable liquids, gases, or dusts. Warning Turn off the radio before approaching any area where you are instructed to turn off a two-way radio. Radio installation and operation in vehicles Warning Keep the radio away from airbags and airbag deployment areas. Do not install, charge, or place a radio near such areas. An activated airbag can propel a portable radio with sufficient force to cause serious injury to vehicle occupants. An airbag may not perform to specification if obstructed by a radio. Warning To avoid damage to existing wiring, airbags, fuel tanks, fuel and brake lines, or battery cables, refer to the installation guide for the radio, and to the vehicle manufacturers manual, before installing electronic equipment in the vehicle. Using a handheld microphone or a radio while driving a vehicle may violate the laws and legislation that apply in your country or state. Please check the vehicle regulations in your area. 16 For your safety Electromagnetic compatibility in European vehicles In the European Community, radio equipment fitted to automotive vehicles is regulated by UNECE Regulation 10 Revision 5. The requirements of this regulation cover the electromagnetic compatibility of electrical or electronic equipment fitted to automotive vehicles. Unapproved modifications or changes to radio The radio is designed to satisfy the applicable compliance regulations. Do not make modifications or changes to the radio that are not expressly approved by Tait. Failure to do so could invalidate compliance requirements and void the users authority to operate the radio. Attaching of labels Warning Do not obstruct the vent hole on the battery or the vent hole on the radio chassis label. If the vent on the battery is obstructed, the battery may explode, causing personal injury and/or damage to property. If the vent on the radio is obstructed, audio quality and/

or key function may deteriorate and radio seals may be damaged. Caution Tait recommends that you do not affix additional labels to the surfaces between the radio chassis and the battery. The fit between these surfaces is intentionally firm and any added thickness will damage the points of attachment between radio and battery. Do not obstruct the vent holes (see Warning above). Do not allow the paper label to extend beyond the recessed label area or to conceal relevant product information. For your safety 17 Use of lithium-ion batteries Warning A damaged battery can cause an explosion or fire, and can result in personal injury and/or property damage. To prevent personal injury and/or damage to property, read the important safety information supplied with the battery. Short-circuiting battery contacts Warning Do not short-circuit the battery contacts, neither intentionally nor accidentally, e.g. by placing the battery with conductive materials such as keys or jewelry inside a pocket or container. Short-circuiting the battery contacts can heat up the conductive material and cause personal injury and/or damage to property. 18 For your safety Menu map This section shows the menus and submenus that may be programmed for your radio (for radios with display only). Contact Favorite contact list Contact list Edit contact Delete contact View contact New contact Manual dial Ctrl services Alert call Radio check Radio disable Radio enable Remote monitor Message New message Quick text Status message Inbox Forward Reply Outbox Drafts Call logs Outgoing Incoming Missed Zone Scan Scan on/off Scan list Programming Channel Frequency Slot Color code Tx contact Rx group list CTCSS Radio Radio alias Radio ID Settings Radio settings Talk around Power level Squelch level Lone worker Backlight Day/night mode Brightness Keypad lock LED Tones Man down1 Encrypt Channel display mode Language Radio password Optional key VOX Keypad mode Vibration Radio information Accessories GPS1 Position view Time zone BT1 Work order 1. TP3350 only Menu map 19 1 About this guide This users guide provides information about the T03-00302 (TP3300) and T03-00303 (TP3350) DMR conventional and analog portable radios. Both models are available with the following front panels:

display and 16 keys display and 4 keys no display and no keys These front panels are interchangeable. Contact your radio provide for more information. Bluetooth(page 42), GPS (page 52), and man-down features are only available in TP3350 portables. Mandown can operate in all signalling modes. The radio behavior described in this guide applies to radios with firmware version v1.01. If your radio does not operate as you expect, contact your radio provider for assistance. Safety warnings used in this guide Please follow exactly any instruction that appears in the text as an alert. An alert provides necessary safety information as well as instruction in the proper use of the product. This users guide uses the following types of alert:

Warning This alert is used when there is a hazardous situation which, if not avoided, could result in death or serious injury. Caution This alert is used when there is a hazardous situation which, if not avoided, could result in minor or moderate injury. 20 About this guide Notice This alert is used to highlight information that is required to ensure procedures are performed correctly. Incorrectly performed procedures could result in equipment damage or malfunction. This icon is used to draw your attention to information that may improve your understanding of the equipment or procedure. Related documentation The following documentation is also available for your Tait radio, which you can access from the Tait Technical Support website

(http://support.taitradio.com):

Safety and Compliance Informationsupplied with each radio. (The same information is included in this users guide.) Li-ion Battery Safety Informationsupplied with each Li-ion battery. About this guide 21 2 Before using your radio Once you have unpacked your radio, there are a few tasks you must do before you can use it. The most important of these is to charge your battery for the first time allow 2.5 hours for this. Warning Do not charge the battery or change the antenna in a hazardous location. An explosion could cause serious injury or death. This section covers:

Package Contents For your safety battery warning Attaching labels to the radio or battery Charging the battery before first use Attaching the battery Removing the battery Attaching the antenna Removing the antenna Replacing the belt clip Attaching an audio accessory 22 Before using your radio Package Contents Your TP3 package contains the following items:

Radio Antenna(s) Battery(s) Battery Charger Multi-National Plug Pack Belt Clip Safety and Compliance documents Before using your radio 23 For your safety battery warning Warning This radio uses a Lithium-ion battery. If the battery is damaged or handled in an unsafe manner, it can cause personal injury and/or damage to property. Read the important safety information included with your battery. Attaching labels to the radio or battery The radio has recesses to attach labels to the front

(not for 16-key radio), both sides and the rear. Please contact your Tait dealer for pre-printed, customized labels. Warning Do not cover the battery vent hole or the vent hole on the radio chassis. If the vent on the battery is obstructed, the battery may explode, causing personal injury and/or damage to property. If the vent on the radio is obstructed, audio quality and/or key function may deteriorate and radio seals may be damaged. Notice Tait recommends that you do not affix additional labels to the surfaces between the radio chassis and the battery. The fit between these surfaces is intentionally firm and any added thickness will damage the points of attachment between radio and battery. 24 Before using your radio Charging the battery before first use Before using your battery for the first time, you must charge it. Follow the instructions included with your Tait charger. This information is repeated in the section "Charging and caring for batteries" on page 53. For best charging performance, switch off the radio before placing it in the charger. Before using your radio 25 Attaching the battery 1 Rotate the power/volume control switch counterclockwise to turn off the radio. If the battery has been attached while the radio is turned on, turn the radio off and then on again before use. 2 Insert the top of the battery into the recess at the back of the chassis. 3 Lightly press the bottom of the battery towards the radio until the battery catch clicks. 4 Make sure that the battery is firmly in position. Removing the battery The battery is secured to the radio by a battery catch in the radios rear panel. To remove the battery from the radio, so that the battery can be charged or replaced:

1 Rotate the power/volume control switch counterclockwise to turn off the radio. If the battery has been removed while the radio is turned on, turn the radio off and then on again before use. 2 Push the PRESS button at the bottom of the radio to release the battery catch, and pull the battery away from the radio. 26 Before using your radio Attaching the antenna Before using the radio, screw the antenna clockwise into the antenna connector. The antenna should be screwed sufficiently tight so that it doesnt unscrew easily. This is important as it creates a seal. Removing the antenna Warning Do not change the antenna in a hazardous location. An explosion could cause serious injury or death. Use a firm grip and turn the antenna counterclockwise half a turn. Use a lighter grip to fully unscrew the antenna, and carefully remove it. Replacing the belt clip 1 To remove the belt clip, use a Pozidrive screwdriver to undo the two belt clip screws. 2 To attach the belt clip, use a Pozidrive screwdriver to fasten the two belt clip screws. Before using your radio 27 Attaching an audio accessory Audio accessories plug into the radios accessory connector. The accessory connector is protected by a cover, which needs to be removed before an accessory can be installed. Notice The accessory cover protects the accessory connector from electrostatic discharge. Keep the cover in place unless the connector is in use. To remove the accessory cover and install an audio accessory:

1 Use a coin or other blunt object to loosen the screw that secures the accessory cover to the radio. 2 Remove the accessory cover and store it in a safe place. 3 Plug the accessory into the accessory connector. 4 Tighten the screw. 5 Once the radio has recognized the accessory, the accessory icon will appear. 28 Before using your radio 3 Getting started This section gives an overview of your DMR radio, describes the radios controls and indicators, and explains how the radio menus are organized. This section covers:

About your DMR digital radio About the radio controls Understanding the radio display Understanding the radio indicators Using function keys to access frequently used fea-

tures Navigating the radios menus Getting started 29 About your DMR digital radio Your DMR digital radio can be programmed for DMR conventional. Analog conventional operation is also available. You may notice differences between digital and analog calls in terms of:

static noise in low signal areas, and radio coverage in marginal reception areas. Lack of static noise On digital networks there is no static noise, even in low signal areas. This lack of static is because your digital radio removes the noise from the call, so that you hear only clear voice. Coverage With digital networks, a call remains clear and then drops off quickly at the border of a coverage area. The reason for this is that a digital call is either received or it isn't. With analog networks, the background noise in a call gets progressively worse when you are in fringe areas or even slightly outside normal coverage areas. 30 Getting started What you hear on an analog channel On analog channels, your radio may be programmed so that you hear all conversations on a channel, or your user group may be segregated from other user groups by using special signaling. The special signaling is used to control the muting and unmuting of your radio, so that your radio is muted when other user groups are talking and unmuted for members of your user group. There are two muting controls that operate in your radio:

signaling mute squelch Signaling mute The radios signaling mute only allows the radio to unmute if the incoming call carries the tones specific to your user group. Your user group may use tones that are either audible, subaudible or both. Squelch The radios squelch allows the radio to unmute only when the strength of the incoming signal is above a predetermined threshold. This means that only signals of reasonable intelligibility are made audible. Getting started 31 About the radio controls The radio controls are the PTT key, power/volume control, channel selector, scroll keys, selection keys, and function keys. Some keys have functions assigned to both short and long key presses:

a short key press is less than one second, and a long key press is more than one second. The radio controls and their functions are described in the following sections. power / volume control status LED speaker /

microphone display scroll keys right selection key function key 5 alphanumeric keys channel selector function key 1

(emergency key) PTT key

(press-to-talk) function key 2 function key 3 left selection key function key 4 32 Getting started Name PTT key Power/volume control Channel selector Left and right selection keys Scroll keys Function Press and hold to transmit and release to listen Rotate to turn the radio on and change the speaker volume Select and change channels Action determined by the text above the selection key Scroll up and down through a list of menu options, scroll left and right in messages, or access a pre-programmed menu Function keys Programmed for frequently used options Alphanumeric keys Used to enter letters and numbers Getting started 33 Understanding the radio display The messages and icons you see on your radio display depend on the mode in which your radio is operating and the way it is programmed. Radio display icons These are some of the icons you may see on your radio display:

Icon Meaning No signal. Signal strength indicator: the more bars, the stronger the signal being received by the radio Battery indicator: shows how much charge is available in the battery. Bluetooth: The Bluetooth feature is enabled but there is no remote Bluetooth device connected. Bluetooth connected: The Bluetooth feature is enabled. The icon stays lit when one or more remote Bluetooth devices are connected. Scanning: your radio is monitoring a group of channels or workgroups for activity. Scan land on: Scan feature is enabled. Encryption: Encryption is turned on. GPS available: GPS is turned on. The icon stays lit when a position fix is available. GPS not available/out of range: GPS is turned on. The icon stays lit when a position fix is available. Accessories connected. High-power transmit: Your radio is set to transmit on high power. Low-power transmit: Your radio is set to transmit on low power. Direct mode (talkaround mode). In repeater mode no icon is shown. 34 Getting started Icon Meaning Unread message. VOX enabled. Speaker open. Private Call Indicates a Private Call in progress. In the Contacts list, it indicates a subscriber alias (name) or ID (number). Bluetooth Audio Device Bluetooth-enabled audio device, such as a headset. Item sent successfully. Switch Input Method Long-press the # key to switch input method between:

lowercase uppercase numeric Getting started 35 Understanding the radio indicators The status LED indicator and the radios audible tonestogether with the radio displayall combine to give you information about the state of your radio. The most common way the indicators work is described in the following sections. The way these indicators behave may be affected by the way your radio is programmed. Status indicators status LED Color Red Meaning On: The radio is transmitting. Flashing: The battery is low. Green Orange On: The radio is receiving, or detecting activity over the air. On: The radio is powering up. Flashing: The Radio is scanning, or in selective call, or emergency state. 36 Getting started Audible tones Warning Your radio may be programmed to be silent, which means you may not hear any alerts. The radio uses audible tones to alert you to its status:

Radio controls and keypress tonesthe tones and beeps you hear when you press your radios keys or use the controls. Incoming call tonewhen the radio is receiving a call. Warning toneswhen there is an error, or the bat-

tery is low, for example. Voice annunciation Your radio may be programmed to play a pre-

recorded message for start-up channel when changing the channel for the battery condition Getting started 37 Using function keys to access frequently used features The function keys provide access to some of the features you will use most often. These features are assigned to the function keys when the radio is programmed. Some keys may have a feature associated with both a short key press and a long key press. function key 1

(emergency key) function key 2 function key 3 function key 4 function key 5 Use the following table to record the function keys programmed for your radio:

Short key press Long key press F1 F2 F3 F4 F5 For more information about the function keys that can be programmed on your radio, contact your radio provider. 38 Getting started Navigating the radios menus Radios with display have a number of menus, each containing lists or submenus. The menus available depend on the way your radio is programmed. See also "Menu map" on page 19. To access the menu, press the left selection key whenever Menu appears above it. Channel 3 Zone 1 Menu Main Menu Contacts Message Call log Zone Select Back Use the scroll keys to move through the menu list. When the menu you want is highlighted, press Select

(left selection key). To go back one level, press Back (right selection key). Getting started 39 4 Operation This section describes the basic operation of your radio. This section covers:

Turning the radio on and off Adjusting the speaker volume Connecting to a Bluetooth device (TP3350 only) Selecting a zone Selecting a channel Making a group call Making a private call Turning scanning on and off Making a call alert Sending a quick text message Sending an emergency alarm Turning location information on and off

(TP3350 only) 40 Operation Turning the radio on and off Rotate the On/Off/Volume control switch clockwise until you hear a click. You see a welcome message or welcome image. The LED lights up solid orange and the Home screen lights up if the backlight setting is set to turn on automatically. To turn off the radio, rotate the switch counterclockwise until you hear a click. You see a brief Powering Down on the radios display. Your radio may not turn on if your battery is very low. (See "Low battery warning" on page 56.) Security lock on power-up feature Your radio may be automatically locked each time it is powered-up. 1 Power up the radio. 2 Enter your current six-digit password with the radio keypad. The display shows ******. You hear a positive indicator tone for every digit pressed. 3 Press the right selection key to remove the each *

on the display. 4 Press the left selection key to proceed. If the password is correct, your radio proceeds to power up. If the password is incorrect, the display shows Password Input Error. Repeat step 2. Operation 41 Adjusting the speaker volume Rotate the power/volume control clockwise to increase the speaker volume and counterclockwise to decrease the volume. The volume control also changes the volume level of the radios audible indicators. Connecting to a Bluetooth device (TP3350 only) You may be able to connect a Bluetooth device to your radio. Compatibility with Tait radios Bluetooth devices may operate with Tait radios, provided they:

are compatible with the Bluetooth Specification Version 2.0 or higher. Tait recommends Bluetooth Specification Version 2.1 or higher. include Bluetooth Headset Profile (HSP) adopted version 1.1 or 1.2, or Bluetooth Handsfree Profile

(HFP) version 1.5 or 1.6. Wearing a Bluetooth headset Place the headset on your ear. Depending on which ear you are going to wear the headset, simply adjust the ear hook accordingly. To get the best performance from your headset:

1 Do not block the devices internal antenna (see the devices user documentation). The human body can interfere with a Bluetooth signal. 2 If you usually use your radio with your right hand, wear the headset on your right ear. 42 Operation 3 Avoid coming in contact with the internal antenna of a headset or radio. Pairing a Bluetooth device with the radio Before attempting to connect a device, Tait recommends that the device is fully charged. Refer to the documentation of your Bluetooth device for charging instructions. Pairing creates a unique and encrypted wireless link between the radio, and the Bluetooth device. To use a device with your radio, they must first be paired. When you connect to a Bluetooth device for the first time, you need to instruct the radio to search for compatible devices using Bluetooth wireless technology. The search should take less than one minute. Do not turn off your Bluetooth device or press the right selection key during the finding and connecting operation as this cancels the operation. A pin code may be required to be programmed in your radio before it can pair with some devices. Contact your dealer for more information. 16-key and 4-key radios 1 Turn on your Bluetooth device and place it in pairing mode. Refer to the documentation of your Bluetooth device. 2 On your radio, press Menu and select Accessories. Accessories GPS Bluetooth 3 Select Bluetooth >

My Devices. Select Back If you cannot see My Devices, turn on the BT On/Off setting. 4 Scroll to the required device and press Select. You can also use Search Devices to locate available devices. Operation 43 5 Select Connect. The display shows Connecting to <device>. Your Bluetooth device may require additional steps to complete the pairing. Refer to the documentation of your Bluetooth-enabled device. If successful, the radio display shows <Device>

Connected. A tone sounds and appears beside the connected device. The Bluetooth Connected icon appears on the status bar, or if unsuccessful, the radio display shows Connected Failed. No-key no-display radio 1 Turn on your Bluetooth device and place it in pairing mode. Refer to the documentation of your Bluetooth device. 2 On your radio, press the function key programmed for Bluetooth Connect. A tone sounds and the LED blinks orange. Your Bluetooth device may require additional steps to complete the pairing. Refer to the documentation of your Bluetooth device. If successful, a positive tone sounds, or if unsuccessful, a negative indicator tone sounds. Answering a Call Alert 16-key and 4-key radios:

To answer a call alert on your radio, select View then press and hold the PTT button. 44 Operation Selecting a zone A zone is a group of channels. The 16-key and 4-key radios support up to 2000 channels and 250 zones, with a maximum of 160 channels per zone. The non-keypad radio supports up to 32 channels and two zones, with a maximum of 16 channels per zone. 16-key and 4-key radios Press the function key programmed for Zone. or 1 Press Menu and select Zone. The selected zone is indicated by a

. Zone 2/2 Zone 1 Zone 2 2 Scroll to the required zone and Select Back press Select. No-key no display radio Press the function key programmed for Zone. You hear a positive indicator tone, indicating the radio has switched from Zone 1 to Zone 2. or You hear a negative indicator tone, indicating the radio has switched from Zone 2 to Zone 1. Selecting a channel Once the required zone is displayed (if you have multiple zones in your radio), turn the channel selector to select the channel. Operation 45 Changing a Channel To use the quick channel change method simply dial the channel you would like to use. e.g. - dial 502 to move to channel 502. Making a group call 1 Turn the channel selector to select the channel with the active group alias or ID. 2 Hold the radio vertically one to two inches (2.5 to 5 cm) from your mouth. 3 Press the PTT key to make the call. The LED lights up solid red and the Group Call icon appears. The first text line shows the group call alias. 4 Wait for the Talk Permit tone to finish (if enabled) and speak clearly into the microphone, or wait for the PTT side tone to finish (if enabled) and speak clearly into the microphone. 5 Release the PTT key to listen. When the called radio responds, the LED lights up

, the group green. You see the Group Call icon alias or ID, and transmitting radio alias or ID on your display. 6 Your radio may be programmed to create a short alert tone the moment the target radio releases the PTT key, indicating the channel is free for you to respond. Press the PTT key to respond. or If there is no voice activity for a predetermined period of time, the call ends. 7 The radio returns to the screen you were on prior to initiating the call. 46 Operation Making a private call 1 Turn the channel selector to select the channel with the active subscriber alias or ID. 2 Hold the radio vertically one to two inches (2.5 to 5 cm) from your mouth. 3 Press the PTT key to make the call. The LED lights up red. The Private Call icon appears. The first text line shows the subscriber alias. The second text line displays the call status. 4 Wait for the Talk Permit tone to finish (if enabled) and speak clearly into the microphone. 5 Release the PTT key to listen. When the target radio responds, the LED lights up green. 6 Your radio may be programmed to create a short alert tone the moment the target radio releases the PTT key, indicating the channel is free for you to respond. Press the PTT key to respond. or If there is no voice activity for a predetermined period of time, the call ends. 7 You hear a short tone. The display shows Call Ended. Turning scanning on and off 16-key and 4-key radios Press the function key programmed to turn scan on and off. or 1 Press Menu and select Scan > Scan Switch. 2 Select On or Off. If you cannot turn on scanning, select a scan list first (Scan > Scan List). Operation 47 During scan, the LED flashes orange and the Scan icon is displayed. No-key no-display radio Press the function key programmed to turn scan on or off. During scan, the LED flashes orange. Making a call alert 16-key and 4-key radios Press the function key programmed to make a call alert to the predefined ID. or 1 Press Menu and select Contacts > Contact List. 2 Scroll to required contact and press Select. 3 Select Ctrl Services and Call Alert. or (for 16-key radio only) 1 Press Menu and select Contacts > Manual Dial. 2 Enter the subscriber ID you want to page and press Confirm. 3 In the Ctrl Services menu select Call Alert. The display shows Call Alert and the subscriber alias or ID, indicating that the call alert has been sent. Ctrl Services Rad check Call alert R, monitor Rad enable Select Back The LED flashes red when your radio is sending the call alert. If the call alert acknowledgement is received, the display briefly shows Success!

If the call alert acknowledgement is not received, the display briefly shows Failed!

48 Operation No-key no-display radio Press the function key programmed to make a call alert to the predefined contact. The LED flashes when your radio is sending the call alert. If the Call Alert acknowledgement is received, two chirps sound. or If the Call Alert acknowledgement is not received, a low-pitched tone sounds. Sending a quick text message 16-key radio Press the function key programmed to send a pre-

defined quick text message to a predefined con-

tact. or Press the function key programmed to open the Quick Text function. Go to step 2 below. or 1 Press Menu and select Message > Quick Text. 2 Scroll to the required quick text and press Select. 3 Use the keypad to edit the message, if required. a. Press to move to the left. b. Press to move to the right. c. Press the * key to delete any unwanted characters. d. Press the # key to input one space to the right. e. Long-press the # key to switch between lowercase, upperacase and numeric input. 4 Press Confirm. Operation 49 You can also press the right selectyion key to quit the operation. 5 Press Send. You can also press Save to save the message in the drafts. 6 Select Contact List, scroll to the required contact and then press Select. or Select Manual Dial end enter the subscriber ID and press Confirm. The display shows Sending Msg... and the LED flashes red. If the message is sent, a tone sounds and the display Send Success!

or If the message is not sent, a low tone sounds and the display shows Send Failed!

4-key radio Press the function key programmed to open the Quick Text function. Go to step 2 below. or 1 Press Menu and select Message > Quick Text. 2 Scroll to the required quick text and press Select. 3 Scroll to the required contact and press Select. The display shows Sending Msg... and the LED flashes red. If the message is sent, a tone sounds and the display Send Success!

or If the message is not sent, a low tone sounds and the display shows Send Failed!

50 Operation No-key no-display radio Press the function key programmed to send a pre-

defined quick text message to a predefined ID. The LED flashes red. Two chirps indicate that the message has been sent, or a low-pitched tone indicates that the message cannot be sent. Sending an emergency alarm If your radio is set to silent, it will not display any audio or visual indicators during Emergency mode. Press the function key programmed for emer-

gency. The display shows Tx Alarm and the destination alias. The LED blinks red and the Emergency icon appears. or The radio will send an emergency telegram. You can now press PTT to make an emergency call, and receive by releasing PTT. After a call hang time, the radio return to its normal working state. or The radio will send an emergency telegram and then transmit voice from the microphone for a preset time. And then goes back to normal working state. Then the radio return to its normal working state Operation 51 Turning location information on and off (TP3350 only) Your radio may be enabled to send location information. 16-key and 4-key radios 1 Press Menu and select Accessories > GPS. 2 Select GPS On/Off and select on or off. When GPS is turned on, the GPS icon appear. Once a GPS signal is available, the GPS icon will change to will

. No-key no-display radio Press the function key programmed for GPS to turn GPS on or off. If turned on, a positive tone sounds. If turned off, a negative tone sounds. 52 Operation 5 Charging and caring for batteries This section describes how to charge your Tait radio battery as well as care for it, to ensure safe operation, maximum performance and prolonged battery life. This section covers:

About the chargers Before using the charger Before using the charger Charging temperatures Leaving the battery on charge Receiving calls while charging Low battery warning Charging a battery for the first time Charging a battery LED behavior Removing the battery from the charger Maintaining battery life and performance Storing batteries Disposing of batteries Charging and caring for batteries 53 About the chargers Unless otherwise indicated, the charging advice and instructions in this document apply to all chargers. The following chargers are available for your Tait radios and batteries:

Part number range Designation T03-00322-xxxx Desktop charger Before using the charger Check the battery label and charger label to see if the charger is compatible with the battery. See also

"About the chargers" on page 54. Warning Handle the battery safely. Failure to observe the following handling recommendations could result in personal injury and/or equipment damage. Before using a Li-ion battery, read the Li-ion Bat-

tery Safety Information (MPC-00006-xx) included with your battery, and follow the instructions it pro-

vides. Incorrect use of a Li-ion battery can cause explosion or fire. Do not short-circuit the battery contacts, neither intentionally nor accidentally, e.g. by placing the battery with conductive materials such as keys or jewelry inside a pocket or container. Short-circuit-

ing the battery contacts can heat up the conduc-

tive material. Do not obstruct the vent hole(s) on the battery. If the vent on the battery is obstructed the battery may explode, causing personal injury and/or equipment damage. If the vent on the radio is obstructed, audio quality and/or key function may deteriorate and radio seals may be damaged. 54 Charging and caring for batteries Notice Turn the radio off before removing the battery, and turn it on again after attaching the battery. This ensures that the radio powers down and up correctly. Failing to follow this procedure may require the radio to be turned off then on again to operate correctly. Charging temperatures Notice Do not expose a battery to very high or very low temperatures for extended periods of time. Doing so will shorten the usable life (service life) of the battery. To achieve the best results when charging your battery:

Before you begin to charge your battery, make sure that the battery temperature is close to the room temperature in which the battery is to be charged. 77 F 25 C 50 F 10 C If possible, charge the battery in temperatures between 50 F and 77 F (between 10 C and 25 C). This temperature range is the optimal charging range. Charging only starts when the battery is between 32 F to 104 F (0 C to 40 C). When the battery temperature is outside the normal charging range, the orange LED on the charger is lit. Charging will start or resume once the temperature is within normal limits, and no action is required by you. Leaving the battery on charge You can leave a battery/radio in the charger once charging is complete. Leaving a battery in the charger will not overcharge or damage it. Charging and caring for batteries 55 You can remove a battery/radio from the charger at any time without harming the battery, the radio, or the charger. When you return the battery/radio to the charger, charging is automatically resumed. Receiving calls while charging Notice For best charging performance, switch off the radio before placing it in the charger. You can receive a call while the radio is in the charger, but your radio performance may be degraded. If you do remove the radio from the charger to answer a call, the call will not be disrupted. Removing the radio from the charger to make or receive a call ends the charging process. Charging safely recommences when the radio is reinserted into the charger. Low battery warning Notice Do not allow a radio battery to fully discharge every time you use it, or you will shorten the service life of the battery. When the battery is low, your radio warns you in the following ways:

The battery symbol on the radio display looks empty. The status LED on the radio slowly flashes red. A high-pitched beep sounds. You should recharge or replace the battery as soon as possible. 56 Charging and caring for batteries Charging a battery for the first time Fully charge a battery before using it for the first time. The red LED stays lit while the battery charges. Charging a battery Notice For best charging performance, switch off the radio before placing it in the charger. 1 Desktop charger: Connect the charger to the correct Tait power adaptor. 6-way charger: Power on the charger. Initially, all three LEDs are lit for 2 seconds. 2 Place just a battery in the charger, or a radio with a battery attached (desktop charger or 6-way charger only). There is no need to remove a belt clip, antenna, or any accessory that is attached to the accessory connector. The red LED lights up, and stays lit while the battery charges. When charging is complete, the green LED stays lit. Charging and caring for batteries 57 LED behavior If there is a battery in the charger when power is supplied to the charger, the LEDs behave as follows:

Meaning briefly The charger has been connected to a power supply. The battery is charging. steady steady Charging complete. Remove the battery, or leave it in the charger. steady The battery temperature is outside the nor-

mal charging range. Charging will start or resume once the temperature is within nor-

mal limits. No action is required by you. There is a fault. Contact your dealer. If the LEDs for all charger slots continuously flash orange, or red then orange, the charger itself may be faulty. Contact your dealer. There is a fault. Contact your dealer. or flashing all off If the charger does not behave as expected:

Make sure the radio or battery is seated properly in the charger. Check that the charger is properly plugged into the originally supplied power supply. Check that the battery and charger contacts are clean. To clean, wipe the contacts with a dry lint-

free cloth to remove any dirt, oil or grease. 58 Charging and caring for batteries Removing the battery from the charger Lift the battery/radio out of the charger. You can remove a battery/radio from the charger at any time without harming the battery, the radio, or the charger. When you return the battery/radio to the charger, charging is automatically resumed. You can also leave a battery/radio in the charger once charging is complete. Maintaining battery life and performance With proper care and maintenance you will maintain the performance and life of the battery. It is recommended that you:

Use only Tait chargers and batteries. Do not expose a battery to very high or very low temperatures for extended periods of time. Doing so will shorten the service life of the battery. Very high: above 140 F (60 C) Very low: less than 4 F (20 C) Charge the battery at a room temperature of between 50 F and 77 F (between 10 C and 25 C). This temperature range is the optimal charging range. Wipe excess moisture and dirt from the radio, radio contacts and battery contacts before charg-

ing the battery. Store batteries properly when not in use. See "Storing batteries". Storing batteries When not in use for a month or more, batteries should be stored correctly to prolong their life. Charging and caring for batteries 59 Remove the battery from the radio before storage. Fully charge the battery if storing for less than one month. Charge batteries to about 30% if storing for longer than one month. Store in a cool dry place. Batteries that have been stored for any length of time must be charged before being used. See "Charging a battery for the first time" on page 57. Disposing of batteries Run the battery flat before disposing of it. When disposing of the battery, be sure to do so in an environmentally sensitive manner. Please contact your radio provider for information on recycling programs in your area. See "Environmental responsibilities" on page 6 for more information. 60 Charging and caring for batteries 6 Troubleshooting This section describes troubleshooting procedures, and basic maintenance. This section covers:

About troubleshooting When your radio wont turn on Identifying the radios audible tones Viewing radio information General care Troubleshooting 61 About troubleshooting If you are experiencing difficulty operating your radio, you may find the following sections helpful. Consult your radio provider for assistance, if necessary. When your radio wont turn on If the LED on your radio does not glow red when the radio is turned on, it is probable that power is not reaching the radio. Check the following:

Is the battery firmly attached to the radio?

Is the battery sufficiently charged?

Is the battery charger working properly?

If all appears to be in order, but your radio still fails to operate properly, contact your radio provider for further assistance. Identifying the radios audible tones The radios audible tones can help you identify a potential problem. See "Audible tones" on page 37. Viewing radio information Your radio provider may ask you for the hardware and firmware version of your radio, for troubleshooting purposes. Use the Radio Info menu to view information such as the hardware and firmware version of your radio, the radio serial number, and various radio identities. 1 Press Menu and select Settings > Radio Info. 2 Scroll to the radio information you want to view. 62 Troubleshooting General care Your radio requires no regular maintenance other than ensuring that the battery has sufficient charge and that no damage has occurred to the antenna or the battery. Notice To prevent permanent damage to the radio case, do not allow the radio to come into contact with detergents, alcohol, aerosol sprays, or petroleum-

based products. For general battery care, see "Maintaining battery life and performance" on page 59. Cleaning the contacts of the battery Notice Do not scratch or scrape the contacts of the battery. If necessary, wipe the contacts of the battery with a dry, lint-free cloth to remove any dirt, oil or grease. Cleaning the radio If you need to clean the radio case, use a cloth dampened with clean water. Do not immerse the radio in fluids. Troubleshooting 63 Tait Software Licence Agreement This Software License Agreement

("Agreement") is between you

(Licensee) and Tait International Limited (Tait"). By using any of the Software items embedded and pre-loaded in the related Tait Designated Product, included on CD, downloaded from the Tait website, or provided in any other form, you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, do not install or use any of the Software. If you install or use any of the Software, that will be deemed to be acceptance of the terms of this Agreement. For good and valuable consideration, the parties agree as follows:

SECTION 1 DEFINITIONS Confidential Information means all or any information supplied to or received by Licensee from Tait, whether before or after installation or use and whether directly or indirectly pertaining to the Software and Documentation supplied by Tait, including without limitation all information relating to the Designated Products, hardware, software;

copyright, design registrations, trademarks; operations, processes, and related business affairs of Tait;

and including any other goods or property supplied by Tait to Licensee pursuant to the terms of this Agreement. Designated Products means products provided by Tait to Licensee with which or for which the Software and Documentation is licensed for use. Documentation means product and software documentation that specifies technical and performance features and capabilities; user, operation, and training manuals for the 64 Tait Software Licence Agreement Software; and all physical or electronic media upon which such information is provided. Executable Code means Software in a form that can be run in a computer and typically refers to machine language, which is comprised of native instructions the computer carries out in hardware. Executable code may also refer to programs written in interpreted languages that require additional software to actually execute. Intellectual Property Rights and Intellectual Property mean the following or their substantial equivalents or counterparts, recognized by or through action before any governmental authority in any jurisdiction throughout the world and including, but not limited to all rights in patents, patent applications, inventions, copyrights, trademarks, trade secrets, trade names, and other proprietary rights in or relating to the Software and Documentation;

including any adaptations, corrections, de-compilations, disassemblies, emulations, enhancements fixes, modifications, translations and updates to or derivative works from, the Software or Documentation, whether made by Tait or another party, or any improvements that result from Tait processes or, provision of information services. Licensee means any individual or entity that has accepted the terms of this License. Open Source Software means software with freely obtainable source code and license for modification, or permission for free distribution. Open Source Software License means the terms or conditions under which the Open Source Software is licensed. Person means any individual, partnership, corporation, association, joint stock company, trust, joint venture, limited liability company, governmental authority, sole proprietorship, or other form of legal entity recognized by a governmental authority. Security Vulnerability means any flaw or weakness in system security procedures, design, implementation, or internal controls that if exercised

(accidentally triggered or intentionally exploited) could result in a security breach such that data is compromised, manipulated, or stolen, or a system is damaged. Software (i) means proprietary software in executable code format, and adaptations, translations, de-

compilations, disassemblies, emulations, or derivative works of such software; (ii) means any modifications, new versions and new releases of the software provided by Tait; (iii) means any upgrades, enhancements or other functions or features to the Software provided by Tait; and (iv) may contain one or more items of software owned by a third-

party supplier. The term "Software"

includes the applicable Software Key and does not include any third-party software provided under separate license or not licensable under the terms of this Agreement. Source Code means software expressed in human readable language necessary for understanding, maintaining, modifying, correcting, and enhancing any software referred to in this Agreement and includes all states of that software prior to its compilation into an executable programme. Software Key means a code or key that is supplied by Tait to access, enable and use the Software or certain functions or features of the Software. Tait means Tait International Limited and includes its Affiliates. Section 2 SCOPE This Agreement contains the terms and conditions of the license Tait is providing to Licensee, and of Licensees use of the Software and Documentation. Tait and Licensee enter into this Agreement in connection with Tait delivery of certain proprietary Software and/or products containing embedded or pre-loaded proprietary Software. SECTION 3 GRANT OF LICENSE 3.1. Subject to the provisions of this Agreement and the payment of applicable license fees, Tait grants to Licensee a personal, limited, non-

transferable (except as permitted in Section 7), and non-exclusive license to use the Software in executable code form, and the Documentation, solely in connection with Licensee's use of the Designated Products for the useful life of the Designated Products. This Agreement does not grant any rights to source code. 3.2. The Licensee acknowledges that one or more Software Keys may be required from Tait for the Software or certain functions or features of the Software. The Licensee may only access, enable and use such Software or functions or features of the Software with Software Keys issued by Tait. Tait may provide the Licensee with a Software Key for the Software or certain functions or features of the Software agreed to by the parties as part of this Agreement. The Software Key may control the functions or features of the Software licensed in accordance with this Agreement. The Licensees license to the Software Key is limited to a license to use the Software Key only to access, enable and use the Software or certain functions or features of the Software that Tait has agreed to provide to the Tait Software Licence Agreement 65 Licensee and only in accordance with the Documentation. 3.3. If the Software licensed under this Agreement contains or is derived from Open Source Software, the terms and conditions governing the use of such Open Source Software are in the Open Source Software Licenses of the copyright owner and not in this Agreement. If there is a conflict between the terms and conditions of this Agreement and the terms and conditions of the any applicable Open Source Software Licenses, the terms and conditions of the Open Source Software Licenses will take precedence. For information about Open Source Components contained in Tait products and the related Open Source licenses, see:

https://www.taitradio.com/

opensource SECTION 4 LIMITATIONS ON USE 4.1. Licensee may use the Software only for Licensee's internal business purposes and only in accordance with the Documentation. Any other use of the Software is strictly prohibited. Without limiting the general nature of these restrictions, Licensee will not make the Software available for use by third parties on a "time sharing,"

"application service provider," "service bureau" basis, or for any other similar commercial rental or sharing arrangement. 4.2. Licensee will not, and will not directly or indirectly allow or enable any third party to: (i) reverse engineer, disassemble, extract components, decompile, reprogram, or otherwise reduce the Software or any portion thereof to a human perceptible form or otherwise attempt to recreate the source code; (ii) modify, adapt, create derivative works of, or merge the Software; (iii) copy, reproduce, distribute, lend, or lease the Software or Documentation to any third party;

66 Tait Software Licence Agreement

(iv) grant any sublicense or other rights in the Software or Documentation to any third party; (v) take any action that would cause the Software or Documentation to be placed in the public domain; (vi) remove, or in any way alter or obscure any copyright notice or other notice of Tait or third-

party licensors proprietary rights; (vii) provide, copy, transmit, disclose, divulge or make the Software or Documentation available to, or permit the use of the Software by, any third party or on any machine except as expressly authorized by this Agreement; or (viii) use, or permit the use of, the Software in a manner that would result in the production of a copy of the Software by any means whatsoever other than what is permitted in this Agreement. Licensee may make one copy of the Software to be used solely for archival, back-up, or disaster recovery purposes; provided that Licensee may not operate that copy of the Software at the same time as the original Software is being operated. Licensee may make as many copies of the Documentation as it may reasonably require for the internal use of the Software. 4.3. Unless otherwise authorized by Tait in writing, Licensee will not, and will not enable or allow any third party to: (i) install a copy of the Software on more than one unit of a Designated Product; or (ii) copy or transfer Software installed on one unit of a Designated Product to any other device. Licensee may temporarily transfer Software installed on a Designated Product to another device if the Designated Product is inoperable or malfunctioning. Temporary transfer of the Software to another device must be discontinued when the original Designated Product is returned to operation and the Software must be removed from the other device. 4.4. Licensee will maintain, during the term of this Agreement and for a period of two years thereafter, accurate records relating to this license grant to verify compliance with this Agreement. Tait, or a third party nominated by Tait, may inspect Licensees premises, books and records, upon reasonable prior notice to Licensee, during Licensees normal business hours and subject to Licensee's facility and security regulations. Tait is responsible for the payment of all expenses and costs of the inspection, provided that Licensee shall indemnify Tait for all costs

(including audit costs and legal costs on a solicitor client basis) if Licensee has breached the terms of this Agreement. Any information obtained by Tait during the course of the inspection will be kept in strict confidence by Tait and used solely for the purpose of verifying Licensee's compliance with the terms of this Agreement. SECTION 5 OWNERSHIP AND TITLE Tait, its licensors, and its suppliers retain all of their Intellectual Property Rights in and to the Software and Documentation, in any form. No rights are granted to Licensee under this Agreement by implication, estoppel or otherwise, except for those rights which are expressly granted to Licensee in this Agreement. All Intellectual Property developed, originated, or prepared by Tait in connection with providing the Software, Designated Products, Documentation, or related services, remains vested exclusively in Tait, and Licensee will not have any shared development or other Intellectual Property Rights. SECTION 6 LIMITED WARRANTY; DISCLAIMER OF WARRANTY 6.1. The commencement date and the term of the Software warranty will be a period of one (1) year from Tait shipment of the Software. If Licensee is not in breach of any obligations under this Agreement, Tait warrants that the unmodified Software, when used properly and in accordance with the Documentation and this Agreement, will be free from a reproducible defect that eliminates the functionality or successful operation of a feature critical to the primary functionality or successful operation of the Software. Whether a defect has occurred will be determined solely by Tait. Tait does not warrant that Licensees use of the Software or the Designated Products will be uninterrupted, error-free, completely free of Security Vulnerabilities, or that the Software or the Designated Products will meet Licensees particular requirements. Tait makes no representations or warranties with respect to any third-party software included in the Software. 6.2 Tait sole obligation to Licensee, and Licensees exclusive remedy under this warranty, is to use reasonable efforts to remedy any material Software defect covered by this warranty. These efforts will involve either replacing the media or attempting to correct significant, demonstrable program or documentation errors or Security Vulnerabilities. If Tait cannot correct the defect within a reasonable time, then at Tait option, Tait will replace the defective Software with functionally equivalent Software, license to Licensee substitute Software which will accomplish the same objective, or terminate the license and refund Licensees paid license fee. If Tait investigation of the perceived defect reveals that no such defect in fact exists, Tait may recover its costs in respect of such investigation from Licensee. 6.3. Tait disclaims any and all other warranties relating to the Software or Tait Software Licence Agreement 67 Documentation other than the express warranties set forth in this Section 6. Warranties in Section 6 are in lieu of all other warranties whether express or implied, oral or written, and including without limitation any and all implied warranties of condition, title, non-

infringement, merchantability, or fitness for a particular purpose or use by Licensee (whether Tait knows, has reason to know, has been advised of, or is otherwise aware of any such purpose or use), whether arising by law, by reason of custom or usage of trade, or by course of dealing. In addition, Tait disclaims any warranty to any person other than Licensee with respect to the Software or Documentation. SECTION 7 TRANSFERS 7.1. Licensee will not transfer the Software or Documentation to any third party without specific prior written consent from Tait. Tait may withhold such consent or at its own discretion make the consent conditional upon the transferee paying applicable license fees and agreeing to be bound by this Agreement. 7.2. In the case of a value-added reseller or distributor of Tait Designated Products, the consent referred to in Section 7.1 may be contained in a Tait Reseller or Tait Distributor Agreement. 7.3. If the Designated Products are Tait vehicle-mounted mobile products or hand-carried portable radio products and Licensee transfers ownership of the Tait mobile or portable radio products to a third party, Licensee may assign its right to use the Software which is embedded in or furnished for use with the radio products and the related Documentation; provided that Licensee transfers all copies of the Software and Documentation to the transferee. 68 Tait Software Licence Agreement 7.4. 7.4.For the avoidance of any doubt, Section 7.3 excludes TaitNet Infrastructure, or the products listed at any time under network products at:

http://www.taitradio.com. 7.5. If Licensee, as a contractor or subcontractor (integrator), is purchasing Tait Designated Products and licensing Software not for its own internal use but for end use only by a Customer, the Licensee may transfer such Software, but only if a) Licensee transfers all copies of such Software and the related Documentation to the transferee and b) Licensee has first obtained from its Customer (and, if Licensee is acting as a subcontractor, from the interim transferee(s) and from the ultimate end user sub license) an enforceable sublicense agreement that prohibits any other transfer and that contains restrictions substantially identical to the terms set forth in this Software License Agreement. Except as stated in the foregoing, Licensee and any transferee(s) authorised by this Section may not otherwise transfer or make available any Tait Software to any third party nor permit any party to do so. Licensee will, on request, make available evidence reasonably satisfactory to Tait demonstrating compliance with all the foregoing. SECTION 8 TERM AND TERMINATION 8.1. Licensees right to use the Software and Documentation will commence when the Designated Products are supplied by Tait to Licensee and will continue for the life of the Designated Products with which or for which the Software and Documentation are supplied, unless Licensee breaches this Agreement, in which case this Agreement and Licensee's right to use the Software and Documentation may be terminated immediately upon notice by Tait. 8.2. Within thirty (30) days after termination of this Agreement, Licensee must certify in writing to Tait that all copies of the Software have been removed or deleted from the Designated Products and that all copies of the Software and Documentation have been returned to Tait or destroyed by Licensee and are no longer in use by Licensee. 8.3. Licensee acknowledges that Tait made a considerable investment of resources in the development, marketing, and distribution of the Software and Documentation and that Licensee's breach of this Agreement will result in irreparable harm to Tait for which monetary damages would be inadequate. If Licensee breaches this Agreement, Tait may terminate this Agreement and be entitled to all available remedies at law or in equity including immediate injunctive relief and repossession of all non-

embedded Software and associated Documentation. Licensee shall pay all Tait costs (on an indemnity basis) for the enforcement of the terms of this Agreement. SECTION 9 CONFIDENTIALITY Licensee acknowledges that the Software and Documentation contain proprietary and Confidential Information valuable to Tait and are Tait trade secrets, and Licensee agrees to respect the confidentiality of the information contained in the Software and Documentation. SECTION 10 LIMITATION OF LIABILITY 10.1. In no circumstances shall Tait be under any liability to Licensee, or any other person whatsoever, whether in Tort (including negligence), Contract

(except as expressly provided in this Agreement), Equity, under any Statute, or otherwise at law for any losses or damages whether general, special, exemplary, punitive, direct, indirect, or consequential arising out of or in connection with any use or inability of using the Software. 10.2. Licensees sole remedy against Tait will be limited to breach of contract and Tait sole and total liability for any such claim shall be limited at the option of Tait to the repair or replacement of the Software or the refund of the purchase price of the Software. SECTION 11 GENERAL 11.1. COPYRIGHT NOTICES. The existence of a copyright notice on the Software will not be construed as an admission or presumption of publication of the Software or public disclosure of any trade secrets associated with the Software. 11.2. COMPLIANCE WITH LAWS. Licensee acknowledges that the Software may be subject to the laws and regulations of the jurisdiction covering the supply of the Designated Products and will comply with all applicable laws and regulations, including export laws and regulations, of that country. 11.3. ASSIGNMENTS AND SUBCONTRACTING. Tait may assign its rights or subcontract its obligations under this Agreement, or encumber or sell its rights in any Software, without prior notice to, or consent of, Licensee. 11.4. GOVERNING LAW. This Agreement shall be subject to and construed in accordance with New Zealand law and disputes between the parties concerning the provisions hereof shall be determined by the New Zealand Courts of Law. Provided however Tait may at its election bring proceedings for breach of the terms hereof or for the enforcement of any judgment in relation to a breach of the terms hereof in any jurisdiction Tait considers fit for the purpose of ensuring compliance with the terms hereof or obtaining relief for breach of the terms hereof. Tait Software Licence Agreement 69 remaining terms which shall remain in full force and effect as if such part or parts held to be illegal or void had not been included in this Agreement. Tait may replace the invalid or unenforceable provision with a valid and enforceable provision that achieves the original intent and economic effect of this Agreement. 11.11 CONSUMER GUARANTEES. Licensee acknowledges that the licenses supplied in terms of this agreement are supplied to Licensee in business, and that the guarantees and other provisions of prevailing consumer protection legislation shall not apply. 11.12 WHOLE AGREEMENT. Licensee acknowledges that it has read this Agreement, understands it and agrees to be bound by its terms and conditions. Licensee also agrees that, subject only to the express terms of any other agreement between Tait and Licensee to the contrary, this is the complete and exclusive statement of the Agreement between it and Tait in relation to the Software. This Agreement supersedes any proposal or prior agreement, oral or written, and any other communications between Licensee and Tait relating to the Software and the Designated Products. 11.5. THIRD-PARTY BENEFICIARIES. This Agreement is entered into solely for the benefit of Tait and Licensee. No third party has the right to make any claim or assert any right under this Agreement, and no third party is deemed a beneficiary of this Agreement. Notwithstanding the foregoing, any licensor or supplier of third-party software included in the Software will be a direct and intended third-party beneficiary of this Agreement. 11.6. SURVIVAL. Sections 4, 5, 6.3, 7, 8, 9, 10, and 11 survive the termination of this Agreement. 11.7. ORDER OF PRECEDENCE. In the event of inconsistencies between this Agreement and any other Agreement between the parties, the parties agree that, with respect to the specific subject matter of this Agreement, this Agreement prevails. 11.8 SECURITY. Tait uses reasonable means in the design and writing of its own Software and the acquisition of third-party Software in order to limit Security Vulnerabilities. While no software can be guaranteed to be free from Security Vulnerabilities, if a Security Vulnerability is discovered, Tait will take the steps specified in Section 6 of this Agreement. 11.9 EXPORT. Licensee will not transfer, directly or indirectly, any Designated Product, Documentation or Software furnished hereunder or the direct product of such Documentation or Software to any country for which New Zealand or any other applicable country requires an export license or other governmental approval without first obtaining such license or approval. 11.10 SEVERABILITY. In the event that any part or parts of this Agreement shall be held illegal or null and void by any court or administrative body of competent jurisdiction, such determination shall not affect the 70 Tait Software Licence Agreement Simplified Declaration of Conformity EN Hereby, Tait International Limited declares that the radio equipment type TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

www.taitradio.com/eudoc BG Tait International Limited

, TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G 2014/53/.

: www.taitradio.com/eudoc ES Por la presente, Tait International Limited declara que el tipo de equipo radioelctrico TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G es conforme con la Directiva 2014/53/UE. El texto completo de la declaracin UE de conformidad est disponible en la direccin Internet siguiente: www.taitradio.com/eudoc CS Tmto Tait International Limited prohlauje, e typ rdiovho zazen TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G je v souladu se smrnic 2014/53/EU. pln znn EU prohlen o shod je k dispozici na tto internetov adrese: www.taitradio.com/

eudoc DA Hermed erklrer Tait International Limited, at radioudstyrstypen TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G er i overensstemmelse med direktiv 2014/53/EU. EU-overensstemmelseserklringens fulde tekst kan findes p flgende internetadresse:

www.taitradio.com/eudoc DE Hiermit erklrt Tait International Limited, dass der Funkanlagentyp TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G der Richtlinie 2014/53/EU entspricht. Der vollstndige Text der EU-Konformittserklrung ist unter der folgenden Internetadresse verfgbar: www.taitradio.com/

eudoc ET Kesolevaga deklareerib Tait TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F &

TPEH7G vastab direktiivi 2014/53/EL nuetele. ELi vastavusdeklaratsiooni tielik tekst on kttesaadav jrgmisel internetiaadressil:

www.taitradio.com/eudoc Il fabbricante, Tait International Limited, EL / Tait International Limited, TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G 2014/53/

: www.taitradio.com/eudoc FR Le soussign Tait International Limited, dclare que l'quipement radiolectrique du type TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G est conforme la directive 2014/53/UE. Le texte complet de la dclaration UE de conformit est disponible l'adresse internet suivante: www.taitradio.com/eudoc HR Tait International Limited ovime izjavljuje da je radijska oprema tipa TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedeoj internetskoj adresi:

www.taitradio.com/eudoc IT dichiara che il tipo di apparecchiatura radio TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G conforme alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformit UE disponibile al seguente indirizzo Internet:

www.taitradio.com/eudoc LV Ar o Tait International Limited deklar, ka radioiekrta TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G atbilst Direktvai 2014/53/ES. Pilns ES atbilstbas deklarcijas teksts ir pieejams d interneta vietn:

www.taitradio.com/eudoc LT A, Tait International Limited, patvirtinu, kad radijo rengini tipas TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G atitinka Direktyv 2014/53/ES. Visas ES atitikties deklaracijos tekstas prieinamas iuo interneto adresu:

www.taitradio.com/eudoc HU Tait International Limited igazolja, hogy a TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G tpus rdiberendezs megfelel a 2014/53/EU irnyelvnek. Az EU-megfelelsgi nyilatkozat teljes szvege elrhet a kvetkez internetes cmen: www.taitradio.com/eudoc Simplified Declaration of Conformity 71 FI Tait International Limited vakuuttaa, ett radiolaitetyyppi TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen tysimittainen teksti on saatavilla seuraavassa internetosoitteessa: www.taitradio.com/eudoc SV Hrmed frskrar Tait International Limited att denna typ av radioutrustning TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F &

TPEH7G verensstmmer med direktiv 2014/53/

EU. Den fullstndiga texten till EU-frskran om verensstmmelse finns p fljande webbadress: www.taitradio.com/eudoc MT B'dan, Tait International Limited, niddikjara li dan it-tip ta' tagmir tar-radju TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F &

TPEH7G huwa konformi mad-Direttiva 2014/53/

UE. It-test kollu tad-dikjarazzjoni ta' konformit tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li ej:

www.taitradio.com/eudoc NL Hierbij verklaar ik, Tait International Limited, dat het type radioapparatuur TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G conform is met Richtlijn 2014/53/EU. De volledige tekst van de EU-

conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres:

www.taitradio.com/eudoc PL Tait International Limited niniejszym owiadcza, e typ urzdzenia radiowego TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G jest zgodny z dyrektyw 2014/53/UE. Peny tekst deklaracji zgodnoci UE jest dostpny pod nastpujcym adresem internetowym:

www.taitradio.com/eudoc PT O(a) abaixo assinado(a) Tait International Limited declara que o presente tipo de equipamento de rdio TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G est em conformidade com a Diretiva 2014/53/UE. O texto integral da declarao de conformidade est disponvel no seguinte endereo de Internet: www.taitradio.com/eudoc RO Prin prezenta, Tait International Limited declar c tipul de echipamente radio TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F &

TPEH7G este n conformitate cu Directiva 2014/

53/UE. Textul integral al declaraiei UE de conformitate este disponibil la urmtoarea adres internet:

www.taitradio.com/eudoc SK Tait International Limited tmto vyhlasuje, e rdiov zariadenie typu TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G je v slade so smernicou 2014/53/E. pln E vyhlsenie o zhode je k dispozcii na tejto internetovej adrese: www.taitradio.com/

eudoc SL Tait International Limited potrjuje, da je tip radijske opreme TPEB1F, TPEB1G, TPEHGF, TPEHGG, TPEH7F & TPEH7G skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu:

www.taitradio.com/eudoc Simplified Declaration of Conformity 72

iy!

/ 09 OS Ob of nz no Tos.00313-6cpa_ HWU4 TP3350-HG 01 MN Type Code(MUN)/HVIN: TPEHGG FCCID: CASTPEHGG IC: 737A-TPEHGG Tait International Limited POBox 1645, Christchurch, NZ 8140 Made in China ATTENTION: Restricted te occupational

Tait International Limited Add: 245 Wooldridge Road Harewood 1645 Christchurch New Zealand Tel:64 3 358 0403 Email:brian.emmett@taitradio.com DECLARATION OF SIMILARITY Date: 2021-9-17 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, Tait International Limited , hereby declare that the product: Two way radio, FCC ID:CASTPEHGG. model:T03-

00313-GAAA , T03-00313-GBAA, T03-00313-GCAA, T03-00313-GABA, T03-00313-GBBA, T03-00313-GCBA , T03-00313-GACA, T03-00313-GBCA, T03-00313-GCCA, T03-00313-GADA, T03-00313-GBDA, T03-00313-

GAEA, T03-00313-GBEA, T03-00313-GCEA, T03-00313-GAFA, T03-00313-GBFA,T03-00313-GCFA, T03-

00313-GAGA, T03-00313-GBGA, T03-00313-GCGA,T03-00313-GAHA, T03-00313-GBHA, T03-00313-GCHA, T03-00313-GAAB, T03-00313-GBAB, T03-00313-GCAB, T03-00313-GABB, T03-00313-GBBB, T03-00313-

GCBB, T03-00313-GACB, T03-00313-GBCB, T03-00313-GCCB, T03-00313-GADB,T03-00313-GBDB, T03-

00313-GCDB, T03-00313-GAEB, T03-00313-GBEB, T03-00313-GCEB, T03-00313-GAFB, T03-00313-GBFB, T03-00313-GCFB, T03-00313-GAGB, T03-00313-GBGB, T03-00313-GCGB, T03-00313-GAHB, T03-00313-

GBHB, T03-00313-GCHB is electrically identical with the model:T03-00313-GCDA,which was tested by BACL(Dongguan) with the same electromagnetic emissions and electromagnetic compatibility characteristics. A description of the differences among Forty eight models and that are declared similar are as follows:

Tait radios in this series are generally numbed as follows. T03-00313-GXXX for the Smart model. The final three letters in the part code refer to the following T0300313GXXX GXXX GXXX SelectionoftheUserInterface A=0Key,NoDisplay B=4Key,Display C=16Key,Display SelectionoftheColoroftheRadiocover A=Black B=Orange C=Green D=Gray E=White F=Red G=Yellow H=Pink Selectionoftheradiobrandname A=TaitCommunications B=Harris TheTypeapprovaltestingasalsocoveredthedesignswithanyofthefittedkeypadtypes(0Key,4keyand16 key)T0300313XAXXandT0300313XBXXandT0300313XCXX Sincethereisnodifferenceintheradioperformanceforanyofthecolorsorbrandnameswedeclarethe followingradiomodelstoallbeequivalent:

TaitName HVIN FCCID IC

=TP3350HG

=TPEHGG

=CASTPEHGG

=737ATPEHGG 0Key T0300313GAAA T0300313GABA T0300313GACA T0300313GADA T0300313GAEA T0300313GAFA T0300313GAGA T0300313GAHA T0300313GAAB T0300313GABB T0300313GACB T0300313GADB T0300313GAEB T0300313GAFB T0300313GAGB T0300313GAHB 4Key,Display T0300313GBAA T0300313GBBA T0300313GBCA T0300313GBDA T0300313GBEA T0300313GBFA T0300313GBGA T0300313GBHA T0300313GBAB T0300313GBBB T0300313GBCB T0300313GBDB T0300313GBEB T0300313GBFB T0300313GBGB T0300313GBHB 16Key,Display T0300313GCAA T0300313GCBA T0300313GCCA T0300313GCDA T0300313GCEA T0300313GCFA T0300313GCGA T0300313GCHA T0300313GCAB T0300313GCBB T0300313GCCB T0300313GCDB T0300313GCEB T0300313GCFB T0300313GCGB T0300313GCHB The detail information,please check the reports. Sincerely, Brian Emmett Standards and Regulatory Manager

Tait International Limited Add: 245 Wooldridge Road Harewood 1645 Christchurch New Zealand Tel:64 3 358 0403 Email:brian.emmett@taitradio.com FCC Confidential Authorization Date: 2021-9-17 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: CASTPEHGG In accordance with Sections 0.457 and 0.459 of the Commissions Rules, Tait International Limited, hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description Parts List/Tune up procedure (for licensed devices) The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature:

Brian Emmett Standards and Regulatory Manager QA-FR-171-A

Tait International Limited Add: 245 Wooldridge Road Harewood 1645 Christchurch New Zealand Tel:64 3 358 0403 Email:brian.emmett@taitradio.co Date: 2021-9-17 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Extended Frequencies Justification for Certification of Transmitter with FCC ID: CASTPEHGG Dear Sir/Madam, This transmitter was designed to operate in following frequency ranges:400-480MHz To aid equipment authorization in other countries which accept the United States FCC Grant for Certification, Tait International Limited is requesting that the FCC lists the frequencies 400-480MHz, under FCC Rule Parts 22, 74 and 90 on the FCC Grant. Tait International Limited attests that the Two way radio will not be marketed to USA users with the frequency band which is not allowed by the rule Parts 22, 74 and 90. Per the FCCs KDB634817 guidance, as an alternative to listing the exact frequencies, we acknowledge that its a violation of the FCC Rules if this device operates on unauthorized frequencies. Frequency Range(MHz) 400-406 406.1-450 450-454 454-455 455-456 456-460 460-462.5375 462.5375-462.7375 462.7375-467.5375 467.5375-467.7375 467.7375-470 470-480 FCC Rule Part For Federal FCC Part 90 FCC Part 74/ FCC Part 90 FCC Part 22 FCC Part 74 FCC Part 22/ FCC Part 90 FCC Part 90 For Federal FCC Part 90 For Federal FCC Part 90 For Federal Also, equipment programming is the responsibility of Authorized Service Personnel, the Two way radio complies with 47 CFR Part 90.203(e), in that the operator cannot directly program the transmit frequencies using the normally accessible external controls. Please contact me if you require any additional information. Sincerely Yours, Signature:

Brian Emmett Standards and Regulatory Manager

Tait International Limited Add: 245 Wooldridge Road Harewood 1645 Christchurch New Zealand Tel:64 3 358 0403 Email:brian.emmett@taitradio.com Justification Letter Date: 2021-9-17 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: CASTPEHGG Model number: T03-00313-GCDA, T03-00313-GAAA , T03-00313-GBAA, T03-00313-GCAA, T03-00313-GABA, T03-00313-GBBA, T03-00313-GCBA , T03-00313-GACA, T03-00313-GBCA, T03-00313-GCCA, T03-00313-GADA, T03-00313-GBDA, T03-00313-GAEA, T03-00313-GBEA, T03-00313-GCEA, T03-00313-GAFA, T03-00313-

GBFA,T03-00313-GCFA, T03-00313-GAGA, T03-00313-GBGA, T03-00313-GCGA,T03-00313-GAHA, T03-00313-

GBHA, T03-00313-GCHA, T03-00313-GAAB, T03-00313-GBAB, T03-00313-GCAB, T03-00313-GABB, T03-00313-

GBBB, T03-00313-GCBB, T03-00313-GACB, T03-00313-GBCB, T03-00313-GCCB, T03-00313-GADB,T03-00313-

GBDB, T03-00313-GCDB, T03-00313-GAEB, T03-00313-GBEB, T03-00313-GCEB, T03-00313-GAFB, T03-00313-

GBFB, T03-00313-GCFB, T03-00313-GAGB, T03-00313-GBGB, T03-00313-GCGB,T03-00313-GAHB, T03-00313-

GBHB, T03-00313-GCHB Dear Sir/Madam, We, Tait International Limited, acknowledge that this device will not be marketed to USA users with the frequency band which is not allowed by rule part 90.and it is a violation of FCC rules if this device is operated on unauthorized frequencies inside the U.S.A. This equipment meets the requirements of the FCC Rules, Parts 90.203(e) and (g), as applicable. Programming of this products transmit frequencies can be performed ONLY by the manufacturer or by service or by maintenance personal. The operator cant program transmit frequencies using the equipments external operation controls. This is to certify that the requirements of 47 CFR Part 90.203(j)(4) and (5) spectrum efficiency are met by the Tait International Limited as demonstrated by the tests conducted on the sample radio provided. The tests show that the 4FSK data rate is in accordance with ETSI TS 102 361-1, that is 9600 bits per second in a 12.5 kHz bandwidth to satisfy the data rate requirement of 4800 bits per second per 6.25 kHz of channel bandwidth (7K60F1D emissions). Additionally the Two way radio uses the AMBE+2 half-rate vocoder to compress 60 ms of normal bursts are sent in alternate 30 ms TDMA slots and so comply with the equivalence of one voice channel per 6.25 kHz bandwidth (7K60F1E emission). Additionally the radio also meets the requirement of one voice channel per 12.5 kHz of channel bandwidth for analogue speech (11k0F3E emission). Sincerely Yours, Signature:

Brian Emmett Standards and Regulatory Manager