all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
user manual | Users Manual | 691.89 KiB | ||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | user manual | Users Manual | 691.89 KiB |
EYBMABA 16-Nov.-2007 Ver.0.1 TAIYO YUDEN Confidential
& Tentative Bluetooth Module EYBMABA (RF+Baseband (Class 2) UART) Users Manual Please note that this users manual should not be provided to end-users. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. TAIYO YUDEN 1/2 Control No. HD-AG-A071044 HD-AE-A071044 HD-AE-B071044 HD-AE-C071044 HD-AE-D071044 HD-AD-A071044 HD-AD-B071044 HD-BA-A071044 Document Page 1/1 1/4- 4/4 1/1 1/11 - 11/11 1/9- 9/9 1/1 1/3- 3/3 1/2- 2/2 Document constituent list Control name Absolute maximum ratings Electrical characteristics Electrical characteristics Electrical characteristics Electrical characteristics Outline / Appearance Outline / Appearance Pin Layout Rev. record Nov.16. 2007> Ver.0.1 TAIYO YUDEN 2/2 Control No. 11 Control name Absolute maximum ratings APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Maximum rating Item Supply voltage Symbol VDD Input voltage Vin Recommendation operating range MIN
-0.3
-0.3 TYP MAX 3.6 Unit V Condition Ta=25GND reference VDD+0.3 V Condition Symbol VDD MIN 3.0 TYP 3.30 MAX 3.6 Unit V VDD_rn Topr Tstg 0
-30 25 25
(30) mV/p-p Note3) 70 85 Humidity =40%RH Note1 Humidity =40%RH Note2 Item Operating supply voltage Supply voltage ripple and spike noise Operating temperature range Storage temperature range Note1) Operating temperature range is set to satisfy products electrical characteristics in the short term. In terms of product life cycle when it is used in condition of varying from TYP standard in the long term, please refer to the reliability condition. TYP Note2) Storage temperature range is the condition for transportation and storage in temporary. Please keep it under condition of reference data (HQ-BA-***) for long-term storage. Note3) The Max. is a reference value. The value may change depending on the evaluation. Max. TAIYO YUDEN Co., Ltd. Control No. 14 Control name Electrical characteristics (Digital)
(Digital) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Electrical characteristics DC Specifications The Specification applies for Topr=25 degrees C, VDD=3.3V No. Parameter Condition 1 Normal supply voltage 2 Input low voltage 3 Input High voltage 4 Output low voltage 5 Output High voltage 6 Peak current 7 Average current 1 8 Average current 2 9 Average current 3 10 Average current 4 11 Average current 5 12 Average current 6 13 Average current 7 14 Average current 8
/RESET, VREG_CTL, UART_RX, UART_CTS
/RESET, VREG_CTL, UART_RX, UART_CTS UART_TX, UART_RTS UART_TX, UART_RTS Continuous Rx Sniff mode
(Slave only) Standby mode Send DM1packet
(Master) Receive DM1packet
(Slave) Hold mode
(Slave only) Park mode
(Slave only)
/Reset VREG_CTL OFF Symbol VDD Min 3.0 Typ 3.3 VIL 0 VIH 2.0 VOL
VOH VDD-0.4 Iccp Icca1 Icca2 Icca3 Icca4 Icca5 Icca6 Icca7 Icca8
(60) TBD
(13) TBD TBD TBD TBD
(8)
(0.4) Max 3.6 0.8 VDD 0.4
Unit Remark V V V V V Iout =-2mA Iout=-2mA
(180) mA Note 4 mA Notes 1,3 mA Notes 3, 4 mA Note 3 mA Note 3 mA Note 3 mA Notes 2,3 mA Note 4 mA Note 4 Notes:
1. Sniff mode parameter. Max interval 0050h Min interval 0010h Attempt 0005h Timeout 0005h 2. Park mode parameter. Max interval 0100h Min interval 0010h 3. The consumption current might fluctuate with the condition of radio communication, host performance and test circuit. 4. The Typ. is a reference value. The value may change depending on the evaluation. 3. HOST 4. Typ. TAIYO YUDEN Co., Ltd. Control No. 24 Control name Electrical characteristics (Digital)
(Digital) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 AC Specifications The Specification applies for Topr=25 degrees C, VDD=3.3V No. Condition Parameter 1 VDD Rise Time from 0V to 3.0V 2 VDD=3.0V to VREG_CTL High 3 VREG_CTL= 3.0V to /RESET High 4 5 6
/RESET High to Module Ready
/RESET High to /RESET Low
/RESET Pulse Width 7 VREG_CTL Pulse Width 8 VREG_CTL High to Module Ready 9
/RESET Low to VDD Off 10 VREG_CTL Low to VDD Off Symbol Min Typ Max Unit Remark t1 t2 t3 t4 t5 t6 t7 t8 t9 t10 0 0 0 TBD 0 0
(2600)
(2600)
(2) ms Note 2 4 ms ms ms Notes 1, 2 ms us ms ms Notes 1, 2 ms ms Notes:
1. It may change due to the firmware version. 2. The Typ. is a reference value. The value may change depending on the evaluation. 1. firmware version 2. Typ. TAIYO YUDEN Co., Ltd. Control No. 34 Control name Electrical characteristics (Digital)
(Digital) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 10%
VDD t1 90%
t2 VIH VREG_CTL
/RESET UART_I/F t5 t3 VIH VIH VIL VIL t7 VIL VIL VIH t8 t4 t6 t4 Active Active Timing Diagram for Power Up Sequence Active TAIYO YUDEN Co., Ltd. APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Typ Max 5 1 Unit ms byte us byte bit Remark Firmware controlled. Control No. 44 Control name Electrical characteristics (Digital)
(Digital) UART Interface AC Specifications The Specification applies for Topr.= 25 degrees C, VDD=3.3V No. Parameter Symbol 1 RTS Low to RX Data On Condition t1 2 RTS High to RX Data Off 3 CTS Low to TX Data On 4 CTS High to TX Data Off 5 CTS High Pulse Width t2 t3 t4 t5 UART_RTS UART_RX UART_CTS UART_TX t1 t3 Min 0 1 0 t2 t5 t4 Start bit Stop bit 10 bits Timing Diagram for UART signals
<UART Parameters>
Item Baud Rate Date Bits Stop Bits Parity Flow Control Note:
Parameter 115.2kbps (Typ.) 8bits 1bit None CTS/RTS TAIYO YUDEN Co., Ltd. Control No. 11 Control name Electrical characteristics (RF)
(RF) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Electrical characteristics The Specification applies for Topr = 0to +70, VDD=3.00 to 3.60V RF Specifications No Parameter Symbol 1 2 Frequency Initial Frequency Tolerance IFT 3 Output Power POW 4 Modulation Characteristics 5 Sensitivity MC1 MC4 SEN Spec Typ 0 0 0 160 160
-83
-80 Min 2402
-48
-3.5
-6 140 115 Max 2480 48 2.5 4 Unit Remark MHz 078ch(1MHz step) kHz DH5 dBm Ta=252
@Max Power dBm @Max Power 175 kHz Payload: 11110000 average
-75
-70 kHz Payload: 10101010 average dBm BER<0.1%Ta=252 dBm BER<0.1%
Note:
RF output is suspended within TBD after /RESET Active.
/RESET Active RF TBD TAIYO YUDEN Co., Ltd. Control No. 111 Control name Electrical characteristics (Software A)
(Software A) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Supported HCI Commands / HCI Events The Bluetooth functions of this module are as written in the attached PICS. Depending on firmware version Upgrade, the Bluetooth functions are subject to change without notice. Bluetooth PICS Bluetooth HCI COMMAND LIST Command Description OpCode Group Command
(Hex)
(Hex) Parameters Returns Status Notes LINK CONTROL Inquiry HCI _Inquiry HCI _ Inquiry_ Cancel 0x0401 0x0402 HCI_ Periodic_ Inquiry _Mode 0x0403 1 1 1 HCI _Exit _Periodic _Inquiry _Mode 0x0404 1 Connection Management 1 2 3 4 LAP Inquiry Length Num Responses Max Period Length Min Period Length LAP Inquiry Length Num Responses HCI _Create_ Connection 0x0405 1 5 HCI _Disconnect 0x0406 HCI _Create _Connection _Cancel 0x0408 HCI _Accept _Connection _Request 0x0409 HCI _Reject _Connection _Request 0x040A HCI _Change _Connection _Packet_Type 0x040F 1 1 1 1 1 6 8 9 A F HCI _Setup _Synchronous _Connection 0x0428 1 28 HCI _Accept _Synchronous _Connection _Request 0x0429 1 29 HCI _Reject _Synchronous _Connection _Request 0x042A 1 2A BD ADDR Packet Type Page Scan Repetition Mode Reserved Clock Offset Allow Role Switch Connection Handle Reason Packet Type BD ADDR BD ADDR Role BD ADDR Reason Connection Handle Packet Type Connection Handle Transmit Bandwidth Receive Bandwidth Max Latency Voice Setting Retransmission Effort Packet Type BD ADDR Transmit Bandwidth Receive Bandwidth Max Latency Content Format Retransmission Effort Packet Type BD ADDR Reason Status Status Status Status BD ADDR TAIYO YUDEN Co.,Ltd. Yes Yes Yes Yes a b Yes Yes Yes Yes Yes Yes c c Yes d Yes Yes Control No. 211 Control name Electrical characteristics (Software A)
(Software A) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Authentication / Pairing HCI _Link _Key _Request _Reply 0x040B HCI _Link _Key _Request _Negative _Reply 0x040C HCI _PIN _Code _Request _Reply 0x040D HCI _PIN _Code _Request _Negative _Reply HCI _Authentication _Requested HCI _Change _Connection _Link _Key 0x040E 0x0411 0x0415 Encryption HCI _Set _Connection _Encryption HCI _Master _Link _Key Remote Information 0x0413 0x0417 HCI _Remote _Name_ Request 0x0419 HCI _Remote _Name _Request _Cancel HCI _Read _Remote _Supported _Features HCI _Read _Remote _Extended _Features HCI _Read _Remote _Version _Information HCI _Read _Clock _Offset 0x041A 0x041B 0x041C 0x041D 0x041F HCI _Read _LMP _Handle 0x0420 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 B C D E 11 15 13 17 19 1A 1B 1C 1D 1F 20 BD ADDR Link Key BD ADDR BD ADDR PIN Code Length PIN Code BD ADDR Connection Handle Connection Handle Connection Handle Encryption Enable Key Flag BD ADDR Page Scan Repetition Mode Reserved Clock Offset BD ADDR Connection Handle Connection Handle Page Number Connection Handle Connection Handle Connection Handle Status BD ADDR Status BD ADDR Status BD ADDR Status BD ADDR Status BD ADDR Status Connection Handle LMP Handle Reserved Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes TAIYO YUDEN Co.,Ltd. Control No. 311 Control name Electrical characteristics (Software A)
(Software A) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 LINK POLICY HCI _Hold _Mode 0x0801 2 HCI _Sniff _Mode 0x0803 2 HCI _Exit _Sniff _Mode HCI _Park _State HCI _Exit _Park _State 0x0804 0x0805 0x0806 2 2 2 HCI _QoS _Setup 0x0807 2 HCI _Role _Discovery HCI _Switch _Role HCI _Read _Link _Policy _Settings HCI _Write _Link _Policy _Settings HCI _Read _Default _Link _Policy _Settings HCI _Write _Default _Link _Policy_Settings 0x0809 0x080B 0x080C 0x080D 0x080E 0x080F 2 2 2 2 2 2 1 3 4 5 6 7 9 B C D E F HCI _Flow _Specification 0x0810 2 10 Connection Handle Hold Mode Max Interval Hold Mode Min Internal Connection Handle Sniff Max Interval Sniff Min Interval Sniff Attempt Sniff Timeout Connection Handle Connection Handle Beacon Max Interval Beacon Min Interval Connection Handle Connection Handle Flags Service Type Token Rate Peak Bandwidth Latency Delay Variation Connection Handle BD ADDR Role Connection Handle Connection Handle Link Policy settings Default Link Policy Settings Connection Handle Flags Flow direction Service Type Token Rate Token Bucket Size Peak Bandwidth Access Latency Status Connection Handle Current Role States Connection Handle Link Policy Settings States Connection Handle Status Default Link Policy Settings Status Yes Yes Yes Yes Yes Yes e Yes Yes Yes Yes Yes Yes Yes f TAIYO YUDEN Co.,Ltd. Control No. 411 Control name Electrical characteristics (Software A)
(Software A) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 HOST CONTROLLER & BASEBAND 3 HCI _Set _Event _Mask HCI _Reset 3 0x0C01 0x0C03 HCI _Set _Event _Filter 0x0C05 HCI _Flush HCI _Read _PIN _Type HCI _Write _PIN _Type HCI _Create _New _Unit _Key 0x0C08 0x0C09 0x0C0A 0x0C0B HCI _Read _Stored _Link _Key 0x0C0D HCI _Write _Stored _Link _Key 0x0C11 HCI _Delete _Stored _Link _Key 0x0C12 HCI _Write _Local _Name HCI _Read _Local _Name HCI _Read _Connection _Accept _Timeout HCI _Write _Connection _Accept _Timeout HCI _Read _Page _Timeout HCI _Write _Page _Timeout HCI _Read _Scan _Enable HCI _Write _Scan _Enable HCI _Read _Page _Scan _Activity HCI _Write _Page _Scan _Activity HCI _Read _Inquiry _Scan _Activity HCI _Write _Inquiry _Scan _Activity HCI _Read _Authentication _Enable HCI _Write _Authentication _Enable HCI _Read _Encryption _Mode HCI _Write _Encryption _Mode HCI _Read _Class _of _Device HCI _Write _Class _of _Device HCI _Read _Voice _Setting HCI _Write _Voice _Setting 0x0C13 0x0C14 0x0C15 0x0C16 0x0C17 0x0C18 0x0C19 0x0C1A 0x0C1B 0x0C1C 0x0C1D 0x0C1E 0x0C1F 0x0C20 0x0C21 0x0C22 0x0C23 0x0C24 0x0C25 0x0C26 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 3 5 8 9 A B D 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25 26 Event Mask Filter Type Filter Condition Type Condition Connection Handle PIN Type BD ADDR Read All Flag Num Keys To Write BD ADDR [I]
Link Key [I]
BD ADDR Delete All Flag Local Name Conn Accept Timeout Page Timeout Scan Enable Page Scan Interval Page Scan Window Inquiry Scan Interval Inquiry Scan Window Authentication Enable Encryption Mode Class of Device Voice setting States States States States Connection Handle States PIN Type States States States Max Num Keys Num Keys Read States Num Keys Written States Num Keys Deleted States States Local Name States Conn Accept Timeout States States Page Timeout States States Scan Enable States States Page Scan Interval Page Scan Window States States Inquiry Scan Interval Inquiry Scan Window States States Authentication Enable States States Encryption Mode States States Class of Device States States Voice Setting States Yes Yes Yes Yes Yes Yes Yes No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes g h i i i j j TAIYO YUDEN Co.,Ltd. Control No. 511 Control name Electrical characteristics (Software A)
(Software A) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 HCI _Read _Automatic _Flush _Timeout HCI _Write _Automatic _Flush_ Timeout HCI _Read _Num _Broadcast_ Retransmission HCI _Write _Num _Broadcast_ Retransmission HCI _Read _Hold _Mode _Activity HCI _Write _Hold _Mode _Activity HCI _Read _Transmit _Power _Level HCI _Read _Synchronous _Flow _Control _Enable HCI _Write _ Synchronous _Flow _Control _Enable HCI _Set _Controller _To _Host _Flow _Control 0x0C27 0x0C28 0x0C29 0x0C2A 0x0C2B 0x0C2C 0x0C2D 0x0C2E 0x0C2F 0x0C31 3 3 3 3 3 3 3 3 3 3 27 28 29 2A 2B 2C 2D 2E 2F 31 HCI _Host _Buffer _Size 0x0C33 3 33 HCI _Host _Number _Of _Completed _Packets 0x0C35 3 35 HCI _Read _Link _Supervision _Timeout 0x0C36 3 HCI _Write _Link _Supervision _Timeout HCI _Read _Number _Of _Support_IAC 0x0C37 0x0C38 HCI _Read _Current _IAC _LAP 0x0C39 HCI _Write _Current _IAC _LAP 0x0C3A HCI _Read _Page _Scan _Period _Mode HCI _Write _Page _Scan _Period _Mode Set _AFH _Host _Channel _Classification 0x0C3B 0x0C3C 0x0C3F 3 3 3 3 3 3 3 36 37 38 39 3A 3B 3C 3F Connection Handle Connection Handle Flash Timeout Num Broadcast Retransmission Hold Mode Activity Connection Handle Type Synchronous Flow Control Enable Flow Control Enable Host ACL Data Packet Length Host Synchronous Data Packet Length Host Total Num ACL Data Packets Host Synchronous Data Packets Number of Handles Connection Handle [I]
Host Num of Completed Packets [I]
Total Num Connection Handle Connection Handle Link Supervision Timeout Num Current IAC IAC LAP [I]
Page Scan Period Mode AFH Host Channel Classification Broadcast States Connection Handle Flush Timeout States Connection Handle States Num Retransmissions States States Hold Mode Activity States States Connection Handle Transmit Power Level States Synchronous Flow Control Enable States States Yes Yes Yes Yes Yes Yes Yes Yes No No k l m n States Yes n States Connection Handle Link Supervision Timeout States Connection Handle States Num Support IAC States Num Current IAC IAC LAP [I]
States States Page Scan Period Mode States Status Yes Yes Yes Yes Yes Yes Yes No Yes n o TAIYO YUDEN Co.,Ltd. Control No. 611 Control name Electrical characteristics (Software A)
(Software A) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 HCI _Read _Inquiry _Scan _Type 0x0C42 HCI _Write _Inquiry _Scan _Type HCI _Read _Inquiry _Mode HCI _Write _Inquiry _Mode HCI _Read _Page _Scan _Type HCI _Write _Page _Scan _Type HCI Read _AFH _Channel _Assessment _Mode HCI Write _AFH _Channel _Assessment _Mode 0x0C43 0x0C44 0x0C45 0x0C46 0x0C47 0x0C48 0x0C49 3 3 3 3 3 3 3 3 INFORMATIONAL PARAMETERS HCI _Read _Local _Version _ Information 0x1001 4 HCI _Read _Local _Supported _Commands HCI _Read _Local _Supported _Features HCI _Read _Local _Extended _Features 0x1002 0x1003 0x1004 4 4 4 42 43 44 45 46 47 48 49 1 2 3 4 HCI _Read _Buffer _Size 0x1005 4 5 HCI _Read _BD _ADDR 0x1009 4 9 Scan Type Inquiry Mode Page Scan Type AFH Channel Assessment Mode Page number Status Scan Type Status Status Inquiry Mode Status Status Page Scan Type Status Status AFH Channel Assessment Mode Status Status HCI Version HCI Revision LMP Version Manufacturer Name LMP Subversion Status Supported Commands Status LMP Features Status Page number Maximum Page Number Extended LMP Features Status HC ACL Data Packet Length HC Synchronous Data Packet Length HC Total Num ACL Data Packets HC Total Num Synchronous Packets Status BD ADDR Data Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes TAIYO YUDEN Co.,Ltd. Control No. 711 Control name Electrical characteristics (Software A)
(Software A) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 STAUS PARAMETERS HCI _Read _Failed _Contact _Counter HCI _Reset _Failed _Contact _Counter 0x1401 0x1402 HCI _Read _Link _Quality 0x1403 HCI _Read _RSSI 0x1405 5 5 5 5 HCI _Read _AFH _Channel _Map 0x1406 5 HCI _Read _Clock 0x1407 5 TESTING HCI _Read _Loopback _Mode HCI _Write _Loopback _Mode HCI _Enable _Device _Under _Test_Mode 0x1801 0x1802 0x1803 6 6 6 1 2 3 5 6 7 1 2 3 Connection Handle Connection Handle Connection Handle Connection Handle Connection Handle Connection Handle Which Clock Status Connection Handle Failed Contact Counter Status Connection Handle Status Connection Handle Link Quality Status Connection Handle RSSI Status Connection Handle AFH Mode AFH Channel Map Status Connection Handle Clock Accuracy Loopback Mode States Loopback Mode States States Yes Yes No Yes p Yes Yes Yes Yes Yes Notes:
a) Note that for testing purposes, this command may be issued with an Inquiry Length of 0 to program an infinite inquiry length. b) Does not cancel an inquiry that resulted from a periodic inquiry command. c) The packet type field has been expanded for EDR support. It is totally compatible to 2.0+EDR and earlier specifications. d) Can support up to 3 links of SCO or eSCO or a combination of SCO + eSCO. e) Firmware will try to ensure the throughput is guaranteed by deducing a correlated Tpoll value from the Token Rate parameter together with the packet type that is enabled at the time this command is issued. Once a desirable token rate is deduced, the firmware will send LMP_QUALITY_OF_SERVICE_REQ_PDU to the remote device. If the remote device accepts the Tpoll, the firmware will send a QoS_SETUP_COMPLETE event to the host. When the firmware receives a LMP_QUALITY_OF_SERVICE_REQ_PDU, it will send accept as long as the Tpoll is larger than 2 slots in single connection scenario, or Tpoll is larger than 4 slots in a multiple connection scenario. f) Currently only support symmetric flow specification. Asymmetric flow specification support will be available in B0 and after products. g) BD_ADDR filter condition is not supported. h) Does not support local unit key since unit key is less secure, but will accept if peer sends unit key. i) No Link Key database. j) Note that for testing purposes, a Page Timeout of 0 can be issued to denote an infinite Page Timeout value. k) The requested transmit power returned as a signed char in the range of 0 to 28 in 4 dBm steps. l) Called HCI_READ_SCO_FLOW_CONTROL_ENABLE in and earlier specs. m) Called HCI_WRITE_SCO_FLOW_CONTROL_ENABLE in and earlier specs. n) ACL only. o) Only master role will take effect. p) Current golden range is 52 to 72 dBm. Note that this command will return the RSSI associated with the last received packet. TAIYO YUDEN Co.,Ltd. Control No. 811 Control name Electrical characteristics (Software A)
(Software A) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 a) Inquiry Length Inquiry Length=0 b) Periodic Inquiry c) EDR 2.0+EDR d) SCO eSCO 3 SCO+eSCO e) Token Rate Tpoll Token Rate LMP_QUALITY_OF_SERVICE_REQ_PDU Tpoll Qos_SETUP_COMPLETE HOST LMP_QUALITY_OF_SERVICE_RQE_PDU 2 Tpoll 4 Tpoll ACCEPT f) Symmetric Flow Asymmetric Flow B0 g) BD_ADDR h) Unit key Local unit key Unit key i) j) Page Timeout Page Timeout=0 k) signed char 0-28 4dBm l) HCI_READ_SCO_FLOW_CONTROL_ENABLE m) HCI_WRITE_SCO_FLOW_CONTROL_ENABLE n) ACL o) p) Golden Range -52 -72dBm RSSI TAIYO YUDEN Co.,Ltd. Control No. 911 Control name Electrical characteristics (Software A)
(Software A) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 HCI EVENT LIST OpCode Parameters Status Notes Event Description Inquiry Inquiry _Complete Inquiry _Result 0x01 0x02 Status Num Responses BD ADDR [I]
Page Scan Repetition Mode [I]
Reserved[I]
Reserved[I]
Class of Device [I]
Clock Offset [I]
Num responses BD ADDR [I]
Page Scan Repetition Mode [I]
Reserved [I]
Class of Device [I]
Clock Offset [I]
RSSI [I]
Status Connection Handle BD ADDR Link Type Encryption Mode BD ADDR Class of Device Link Type Status Connection Handle Reason Status Connection Handle BD ADDR Link Type Transmission Interval Retransmission Window Rx Packet Length Tx Packet Length Air Mode Status Connection Handle Transmission Interval Retransmission Window Rx Packet Length Tx Packet Length Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes a Inquiry _Result _with _RSSI 0x22 Connection Management Connection _Complete Connection _Request Disconnection _Complete 0x03 0x04 0x05 Synchronous _Connection _Complete 0x2C Synchronous _Connection _Changed 0x2D Authentication / Pairing Authentication _Complete Return _Link _Keys PIN _Code _Request Link _Key _Request Link _Key _Notification 0x06 0x15 0x16 0x17 0x18 Status Connection Handle Num Keys BD ADDR [I]
Link Key [I]
BD ADDR BD ADDR BD ADDR Link Key Key Type TAIYO YUDEN Co.,Ltd. Control No. 1011 Control name Electrical characteristics (Software A)
(Software A) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Encryption Encryption _Change Change _Connection _Link _Key _Complete Master _Link _Key _Complete Remote Information 0x08 0x09 0x0A Status Connection Handle Encryption Enable Status Connection Handle Status Connection Handle Key Flag Remote _Name _Request _Complete 0x07 Read _Remote _Supported _Features _Complete 0x0B Read _Remote _Version _Information _Complete 0x0C Read _Remote _Extended _Features _Complete 0x23 Link Policy QoS _Setup _Complete Role _Change Mode _Change 0x0D 0x12 0x14 Flow _Specification _Complete 0x21 Status BD ADDR Remote Name Status Connection Handle LMP Features Status Connection Handle LMP Version Manufacture Name LMP Subversion Status Connection Handle Page Number Maximum page number Extended LMP Features Status Connection Handle Flags Service Type Token Rate Peak Bandwidth Latency Delay Variation Status BD ADDR New Role Status Connection Handle Current Mode Interval Status Connection Handle Flags Flow direction Service Type Token Rate Token Bucket Size Peak Bandwidth Access Latency Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes TAIYO YUDEN Co.,Ltd. Control No. 1111 Control name Electrical characteristics (Software A)
(Software A) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 General Command _Complete Command _Status Hardware _Error Number _Of _Completed _Packets Data _Buffer _Overflow Max _Slots _Change Read _Clock _Offset _Complete Host Controller & Baseband Flush _Occurred Loopback _Command Connection _Packet _Type _Changed QoS _Violation Page _Scan_ Repetition Mode Change 0x0E 0x0F 0x10 0x13 0x1A 0x1B 0x1C 0x11 0x19 0x1D 0x1E 0x20 Num HCI Command Packets Command Opcode Return Parameters Status Num HCI Command Packets Command Opcode Hardware Code Number of Handles Connection Handle [I]
HC Num Of Completed Packets[I]
Link Type Connection Handle LMP Max Slots Status Connection Handle Clock Offset Connection Handle HCI Command Packet Status Connection Handle Packet Type Connection Handle BD ADDR Page Scan Repetition Mode Yes Yes Yes Yes No Yes Yes Yes Yes Yes No No b Notes:
a) No Link Key database. b) ACL only. The generation of this event is based on buffer thresholds within the BCM2045. This event will however, be returned periodically during periods of inactivity when credits are outstanding. a) b) ACL BCM2045 TAIYO YUDEN Co.,Ltd. Control No. 19 Control name Electrical characteristics (Software B)
(Software B) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 PICS for Firmware Version XX.XX.XX The Bluetooth functions of this module are as below. Depending on firmware version upgrade, the Bluetooth functions are subject to change without notice. RF RF Capabilities (based on PICS proforma for Radio):
Table A.1: RF Capabilities Capability Status Support C.1 : Mandatory to support if Power Class 1 is supported, optional to support if Power Class 2 or 3 is supported. C.2 : Mandatory if SUMMARY, 2-1/4 is claimed;
M C.1 M O O M M C.2 C.3 Yes Yes Yes Yes Yes Yes Yes Yes Yes Status M M Status M C.1 C.2 Support Yes Yes Support Yes Yes Yes Item 1 2 3 4 5 6 7 8 9 Power Class (1,2 or 3) Power Control 1-slot packets supported 3-slot packets supported 5-slot packets supported 79 Channels Support for GFSK modulation Support for /4-DQPSK modulation Support for BDPSK modulation Optional if SUMMARY, 2-1/3 is claimed;
Excluded otherwise. C.3 : Mandatory if SUMMARY, 2-1/4 is claimed;
Else Optional if (RF, 1/8 AND SUMMARY, 2-1/3) is claimed;
Baseband Baseband Capabilities (based on PICS proforma for Baseband) Table B.1: Physical Channel Support frequency band and 79 RF channels Adaptive Frequency Hopping Kernel Capability Table B.1a: Modulation schemes Capability Basic Data Rate, 1 Mbps payload data rate Enhanced Data Rate, 2 Mbps payload data rate Item 1 2 Item 1 2 3 Enhanced Data Rate, 3 Mbps payload data rate C.1: Mandatory if (SUMMARY, 2-1/4) is claimed;
Optional if (SUMMARY, 2-1/3) is claimed;
Excluded otherwise. C.2: Mandatory if (SUMMARY, 2-1/4) is claimed;
Optional if (BB, 1a/2 AND SUMMARY, 2-1/3) is claimed;
Excluded otherwise. TAIYO YUDEN Co.,Ltd. Control No. 29 Control name Electrical characteristics (Software B)
(Software B) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Table B.2: Link Types Capability Item 1 2 3 4 5 Support of ACL link Support of SCO link Support of eSCO link Support of Enhanced Data Rate ACL links Support of Enhanced Data Rate eSCO links C.1: Mandatory IF (SUMMARY, 2-2/1 OR SUMMARY, 2-2/2 ) is claimed;
ELSE Optional IF (SUMMARY, 2-1/3 OR SUMMARY, 2-1/4) is claimed;
Excluded otherwise. C.2: Mandatory IF SUMMARY, 2-2/3 is claimed;
ELSE Optional IF (SUMMARY, 2-1/3 OR SUMMARY, 2-1/4) is claimed;
Excluded otherwise. Table B.3: SCO Link support Prerequisite: 2/2 (Support of SCO link) Item Capability 1 2 3 SCO links to same Slave SCO links to different Slaves SCO links from same Master 4 SCO links from different Masters C.1: Mandatory to support at least 1 link. Prerequisite: 2/3 (Support of eSCO link) Item Capability 5 6 7 8 eSCO links to same Slave eSCO links to different Slaves eSCO links from same Master eSCO links from different Masters C.2: Mandatory to support at least 1 link. Table B.4: Common packet types Capability Table B.5: ACL packet types Capability Item 1 2 3 4 5 Item 1 2 3 4 5 6 Support of ID packet type Support of NULL packet type Support of POLL packet type Support of FHS packet type Support of DM1 packet type Support of DH1 packet type Support of DM3 packet type Support of DH3 packet type Support of DM5 packet type Support of DH5 packet type Support of AUX1 packet type TAIYO YUDEN Co.,Ltd. Status M O O C.1 C.2 Support Yes Yes Yes Yes Yes Status C.1 O C.1 O Status C.2 O C.2 O Status M M M M M Status M O O O O O Support Yes
(3 SCO) Yes
(3 SCO) Yes
(3 SCO) No Support Yes
(6 SCO) Yes
(5 SCO) Yes
(6 SCO) No Support Yes Yes Yes Yes Yes Support Yes Yes Yes Yes Yes Yes Control name Electrical characteristics (Software B)
(Software B) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Control No. 39 Item 1 2 3 4 5 6 Support 2-DH1 packet type Support 2-DH3 packet type Support 2-DH5 packet type Support 3-DH1 packet type Support 3-DH3 packet type Support 3-DH5 packet type Prerequisite: 2/4 (Support of Enhanced Data Rate ACL links) Table B.5a: Enhanced Data Rate ACL Packet Types Capability C.1: Mandatory IF (SUMMARY, 2-2/1 OR SUMMARY, 2-2/2) is claimed;
C.3: Mandatory IF (SUMMARY, 2-2/1 OR SUMMARY, 2-2/2) is claimed;
ELSE Optional IF BB, 1a/2 is claimed;
Excluded otherwise. C.2: Mandatory IF SUMMARY, 2-2/2 is claimed;
ELSE Optional IF BB, 1a/2 is claimed;
Excluded otherwise. ELSE Optional IF BB, 1a/3 is claimed;
Excluded otherwise. C.4: Mandatory IF SUMMARY, 2-2/2 is claimed;
ELSE Optional IF ( BB, 5a/2 AND BB, 5a/4) is claimed;
Excluded otherwise. C.5: Mandatory IF SUMMARY, 2-2/2 is claimed;
ELSE Optional IF (BB, 5a/3 AND BB, 5a/4) is claimed;
Excluded otherwise. Prerequisite for items 1-4: 2/2 (Support of SCO link) Capability Table B.6: SCO and eSCO packet types Support of HV1 packet type Support of HV2 packet type Support of HV3 packet type Support of DV packet type Prerequisite for items 5-7: 2/3 (Support of eSCO link) Capability Support of EV3 packet type Support of EV4 packet type Support of EV5 packet type M O O Table B.6a: Enhanced Data Rate eSCO packet types Prerequisite: 2/5 (Support Enhanced Data Rate eSCO links) Capability Item 1 2 3 4 5 6 7 1 2 3 4 Item Item Support 2 EV3 packet type Support 2 EV5 packet type Support 3 EV3 packet type Support 3 EV5 packet type C.1: Mandatory IF SUMMARY, 2-2/3 is claimed;
ELSE Optional IF BB, 1a/2 is claimed;
Excluded otherwise. C.2: Optional IF BB, 1a/2 is claimed;
Excluded otherwise. C.3: Mandatory IF SUMMARY, 2-2/3 is claimed;
ELSE Optional IF BB, 1a/3 is claimed;
Excluded otherwise. C.4: Optional IF BB, 1a/3 is claimed;
Excluded otherwise. TAIYO YUDEN Co.,Ltd. Status C.1 C.2 C.2 C.3 C.4 C.5 Support Yes Yes Yes Yes Yes Yes Status M O O M Status Status C.1 C.2 C.3 C.4 Support Yes Yes Yes Yes Support Yes Yes Yes Support Yes Yes Yes Yes Control No. 49 Control name Electrical characteristics (Software B)
(Software B) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Status M M O Status M Status C.1 C.1 C.1 Status O O M Status O O O O Status O O Status O O Status O O O O Support Yes Yes Yes Support Yes Support Yes Yes Yes Support Yes Yes Yes Support Yes Yes Yes Yes Support Yes Yes (7) Support Yes Yes Support Yes Yes Yes Yes Item 1 2 3 4 5 Item 1 Item 1 2 3 1 2 3 Item Item 1 2 3 4 5 6 Item 1 2 Item 1 2 Item 1 2 3 4 Table B.7: Page procedures Capability Support paging Support page scan Supports Interlaced Scan during page scan Table B.8: Paging schemes Capability Supports mandatory scan mode Table B.9: Paging modes Capability Supports paging mode R0 Supports paging mode R1 Supports paging mode R2 C.1: At least one of the paging scan modes must be supported. Table B.9 (b): Paging train repetition Capability Supports Npage >= 1 Supports Npage >= 128 Supports Npage >= 256 Note: The master should use Npage >= 256 unless it knows what SR mode the slave uses. Table B.10: Inquiry procedures Capability Support inquiry Inquiry scan with first FHS Supports the dedicated inquiry access code Supports Interlaced Scan during inquiry scan Table B.11: Piconet capabilities Capability Broadcast messages Point-to-multipoint connections Table B.12: Scatternet capabilities Capability Act as Master in one piconet and as Slave in another piconet Act as Slave in more than one piconet Table B.13: Synchronous Coding Schemes Capability A-law u-law CVSD Transparent Synchronous Data TAIYO YUDEN Co.,Ltd. Control No. 59 Control name Electrical characteristics (Software B)
(Software B) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Link Manager Link Manager Capabilities (based on PICS proforma for Link Manager) Item 1 2 Accept message Reject message Table C.1: Response Messages Capability Status M M Support Yes Yes Table C.2: Supported Features Capability Status O O O O O O O O O C.1 O O O O O M C.2 C.3 Status O O M Status O O M C.1 C.1 C.2 Support Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Support Yes Yes Yes Support Yes Yes Yes Yes Yes Yes Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 3-slot packets 5-slot packets Encryption Slot offset Timing accuracy Role switch (Master/Slave) Hold mode Sniff mode Park mode Power Control Channel quality driven data rate SCO link RSSI Broadcast encryption eSCO link Adaptive frequency hopping Enhanced Data Rate ACL Enhanced Data Rate eSCO C.1: If Power Class 1 is supported (RF, 1/1=1) then Mandatory, else Optional. C.2: Mandatory IF (SUMMARY 2-2/1 OR SUMMARY 2-2/2) is claimed;
ELSE Optional IF (SUMMARY 2-1/3 OR SUMMARY 2-1/4) is claimed;
Excluded otherwise. C.3: Mandatory IF SUMMARY 2-2/3 is claimed;
ELSE Optional IF (SUMMARY 2-1/3 OR SUMMARY 2-1/4) is claimed;
Excluded otherwise. Item 1 2 3 Table C.3: Authentication Capability Initiate authentication before connection completed Initiate authentication after connection completed Respond to authentication request Table C.4: Pairing Capability Item 1 2 3 4 5 6 Initiate pairing before connection completed Initiate pairing after connection completed Respond to pairing request Use fixed PIN and request responder to initiator switch Use variable PIN Accept initiator to responder switch C.1: Mandatory to support at least one of Pairing/ 4 and Pairing/5. C.2: Mandatory to support if Pairing/5 and (Pairing/1 or Pairing/2) is supported. TAIYO YUDEN Co.,Ltd. Control No. 69 Control name Electrical characteristics (Software B)
(Software B) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Table C. 5: Link Keys Capability Support Status C.1 C.1 O M O Status O M M M M M M Status O M Status C.1 No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Support Support Yes Yes Support Yes Creation of link key - Unit Key Creation of link key - Combination Key Initiate change of link key Accept change of link key Accept pairing with Unit Key C.1: Mandatory to support at least one of the key types. Prerequisite: 2/3(Encryption supported) Item Table C.6: Encryption Capability Initiate encryption Accept encryption requests Key size negotiation Start encryption, as master Accept start of encryption Stop encryption, as master Accept stop of encryption Table C.7: Clock offset information Capability Request clock offset information Respond to clock offset requests Table C.8: Slot offset information Capability Send slot offset information C.1: Mandatory to support if support if support if Role Switch/1 (Master/Slave switch) otherwise optional. Table C.9: Timing accuracy information Capability Request timing accuracy information Respond to timing accuracy information requests Table C.10: LM version information Capability Request LM version information Respond to LM version information requests Status O M Status O M Support Yes Yes Support Yes Yes Table C.11: Feature support Capability Request supported features Respond to supported features requests Request extended features mask Respond to extended features Request Status C.1 M C.2 C.2 Support Yes Yes Yes Yes C.1: Mandatory to support if any of the optional features in Supported Features/1-3, Supported Features /5, Supported Features /7-12, Supported Features /14-16, Adaptive Frequency Hopping/1 is requested by the IUT otherwise optional. C.2: Mandatory if a feature requiring another features page is supported, otherwise optional. Item 1 2 3 4 5 6 7 1 2 3 4 5 6 7 8 9 Item 1 2 Item 1 Item 1 2 Item 1 2 Item 1 2 3 4 TAIYO YUDEN Co.,Ltd. Control No. 79 Control name Electrical characteristics (Software B)
(Software B) Item 1 2 Request name information Respond to name requests Table C.12: Name information Capability Table C.13: Role Switch Prerequisite: 2/6(Role switch) Request Master Slave switch Accept Master Slave switch requests Capability APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Status O M Status O M Support Yes Yes Support Yes Yes Item 1 2 Item 1 Item 1 2 Item 1 1 2 3 4 1 2 3 4 5 6 Item Table C.14: Detach Capability Detach connection Table C.14a: Setting up and Removing Enhanced Data Rate ACL Connection M Status Status C.1 C.1 Support Yes Support Yes Yes Enter Enhanced Data Rate Exit Enhanced Data Rate Capability C.1: Mandatory if LMP, 2/17 supported , otherwise excluded. Table C.14b: Setting up and Removing Enhanced Data Rate eSCO Connection Enter and exit eSCO using Enhanced Data Rate Packets Status C.1 Capability Support Yes C.1: Mandatory if LMP, 2/18supported , otherwise excluded. Table C.15: Hold mode Prerequisite: 2/7 (Hold mode) Item Capability Force hold mode Request hold mode Respond to hold mode requests Accept forced hold mode C.1: Mandatory to support if LMP, 15/1 (Force hold mode) is supported, otherwise optional. Table C.16: Sniff mode Capability Status Support Status O C.1 M M O M C.1 M Support No Yes Yes Yes Yes Yes Yes Yes Request sniff mode Respond to sniff mode requests (rengotiate or reject) Request un-sniff Accept un-sniff requests C.1: If LMP, 16/2 (Request sniff mode) is supported then mandatory to support, otherwise optional. TAIYO YUDEN Co.,Ltd. Control No. 89 Control name Electrical characteristics (Software B)
(Software B) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Table C.17: Park mode Capability Status Support O M O M O M C.1 C.1 O M M Status M M Status M M Status O M Status C.1 M M O O O C.1 C.2 C.3 C.4 Yes Yes No Yes No Yes No Yes Yes Yes Yes Support Yes Yes Support Yes Yes Support Yes Yes Support Yes Yes Yes Yes Yes Yes Yes Request park mode Respond to park mode requests Set up broadcast scan window Accept changes to the broadcast scan window Modify beacon parameters Accept modification of beacon parameters Request Unpark using PM_ADDR Request Unpark using BD_ADDR Slave requested Unpark Accept Unpark using PM_ADDR Accept Unpark using BD_ADDR Prerequisite: 2/13 (RSSI) Item Request to increase power Request to decrease power Capability Prerequisite: 2/10(Power contorol) Respond when max power reached Respond when min power reached Capability Item 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 Item Item 1 2 Item C.1: If LMP, 17/3 (Respond to park mode requests) is supported then at least one of LMP, 17/9
(Unpark using PM_ADDR) or LMP, 17/10 (Unpark using BD_ADDR) is mandatory to support, otherwise optional. Table C.18: Power Control Table C.19: Link supervision timeout Set link supervision timeout value Accept link supervision timeout setting Capability Table C.20: Quality of Service Capability Yes Yes Yes C.1: Mandatory to support if support of LMP, 2/11 is stated in the feature request, otherwise optional. Channel quality driven change between DM and DH packet types Force/Request change of Quality of Service Request change of Quality of Service 1 2 3 Table C.21: SCO Links Status Support Prerequisite: 2/12 (SCO links) Item 1 2 3 4 5 6 7 Capability Initiate SCO links, as Master Initiate SCO links, as Slave Accept SCO links Remove SCO links, as Master Remove SCO links, as Slave Negotiate SCO link parameters, as Master Negotiate SCO link parameters, as Slave C.1: Mandatory to support if LMP, 21/1 (Initiating SCO links, as Master) is supported, otherwise optional. C.2: Mandatory to support if LMP, 21/2 (Initiating SCO links, as Slave) is supported, otherwise optional. C.3: Mandatory to support if LMP, 21/1 (Initiating SCO links, as Master) or LMP, 21/3 (Accept SCO links) is C.4: Mandatory to support if LMP, 21/2 (Initiating SCO links, as Slave) or LMP, 21/3 (Accept SCO links) is supported, supported, otherwise optional. otherwise optional.Comments:
TAIYO YUDEN Co.,Ltd. Control No. 99 Control name Electrical characteristics (Software B)
(Software B) APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Table C.22: Multi-Slot packages Capability Accept maximum allowed number of slots to be used Request maximum number of slots to be used Accept request of maximum number of slots to be used Status C.1 C.1 C.1 Support Yes Yes Yes C.1: Mandatory to support if LMP, 2/1 and/or LMP, 2/2 is supported in the feature request, otherwise optional. Table C.23: Paging scheme Capability Request page mode to use Accept suggested page mode Request page scan mode to use Accept suggested page scan mode Table C.24: Connection Establishment Capability Create connection for higher layers Respond to requests to establish connections for higher layers Indicate that link set-up is completed Table C.25: Test Mode Capability Activate test mode Ability to reject activation of test mode if test mode is disabled Control test mode Ability to reject test mode control commands if test mode is disabled. Prerequisite: 2/20(AFH) Table C.26: Adaptive Frequency Hopping Capability Support of AFH switch as master Support of AFH switch as slave Support of Channel Classification reporting as master Support of Channel Classification reporting as slave Support channel classification from host Support of Channel Classification C.1: Optional if LMP, 26/6 is supported, otherwise excluded. C.2: Mandatory if LMP, 26/6 is supported, otherwise excluded. C.3: Mandatory if LMP, 26/1 or LMP, 26/4 is supported, otherwise optional. Status O O O O Status M M M Status O M O M Status O M C.1 C.2 C.3 O Support No No No No Support Yes Yes Yes Support Yes Yes Yes Yes Support Yes Yes Yes Yes Yes Yes Item 1 2 3 Item 1 2 3 4 Item 1 2 3 Item 1 2 3 4 Item 1 2 3 4 5 6 TAIYO YUDEN Co.,Ltd. Control No. 11 Control name OutlineAppearance APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 UnitmmTolerances unless otherwise specified0.2mm mm0.2mm TAIYO YUDEN Co., Ltd. Control No. 13 Control name OutlineAppearance APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Indication Label 1 description (back-side) 1 () 1) BD address number (Refer to Instruction for lot number) BD 2) Product Lot number Four digits (Refer to Instruction for lot number) Lot
. 3 0 3) Version ID Ver. A Version ID Ver. A 8 3 1
. 1) 2) 3) 00037AXXXXXX XXXX Ver. A 24.00.3 Material Label colorWhite Printing Black TAIYO YUDEN Co., Ltd. Control No. 23 Control name OutlineAppearance APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 Indication Label 2-1description (front-side ,Two-Layer Label ,Upper Layer ) 2 ( 2 1 ) 1) Product Number EYBMABA EYBMABA 2) Industry Canada ID 4389B-EYBMABA 3) FCC ID RYYEYBMABA 4) JAPAN logo mark Specified logo mark 5) ARIB, Actual indication Indicates that this device is Second Generation Low Power Data Communication System ARIB 6) JAPAN qualification number 201WW07215247 201WW07215247 7) Manufacture (English) Taiyo Yuden Co., Ltd. 2.4FH1 2.4FH1 1) 2) 3) 4) 5) 6) 7) Material Label colorWhite Printing Black TAIYO YUDEN Co., Ltd. Control No. 33 Control name OutlineAppearance Indication Label 2 description (front-side ,Two-Layer Label ,Lower Layer) 2 ( 2 2 ) 1) R&TTE CE mark Specified CE mark R&TTE CE CE0560 APPROVED CHECKED DRAWN DESIGNED 2007. 11.16 1) TAIYO YUDEN Co., Ltd. Control No. A 12 Control name Pin layout APPROVED CHECKED DRAWN DESIGNED 2007.7.6 Terminal layout drawing shielding case TAIYO YUDEN Co., Ltd. Control No. A 22 Control name Pin layout APPROVED CHECKED DRAWN DESIGNED 2007.7.6 CN1 Terminal No. 1 2 3 4 5 6 7 8 Terminal name Input/Output Description VDD Input UART_CTS Input GND
UART_RTS Output
/RESET Input UART_TX Output VREG_CTL Input UART_RX Input DC3.3V Power supply UART clear to send active low
-with internal pull-up resistor that ranges in value from 20k to 100k depending on process.
(flow control signal from host) Ground UART request to send active low
-with internal pull-up resistor that ranges in value from 20k to 100k depending on process.
(flow control signal to host) Active low RESET signal
-with internal pull-up resistor that ranges in value from 25k to 100k depending on process. TX data to host
-with internal pull-up resistor that ranges in value from 20k to 100k depending on process. VREG1 enable/disable control signal. (Active low) RX data from host
-with internal pull-up resistor that ranges in value from 20k to 100k depending on process. Terminal States on RESET With internal pull-up Remark Note 1 With internal pull-up With internal pull-up With internal pull-up With internal pull-up Notes:
1. Pin1 is used for power supply of BT module. (MAX 1A). To fill the standard of Supply voltage ripple and spike noise, the capacitor ,which has the capacity of TBDF or more, should be pin the terminal VDD outside as a bypass capacitor . TAIYO YUDEN Co., Ltd. FCC Regulatory Information CAUTION: To maintain compliance with FCCs RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may Cause conditions:
undesired operation. operation of the device. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Canada Regulatory Information Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired L'utilisation de ce dispositif est autorise seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) l'utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, R&TTE Directive Information Hereby Taiyo Yuden Co., Ltd., declares that this Complete Class2 Bluetooth Module (Model No.: EYBMABA) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of Conformity may be obtained at;
mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. 8-1 Sakae-Cho, Takasaki-Shi Gunma, JAPAN 370-8522 Telephone No.) 81-27-324-2313; Fax No.)81-27-324-2314. Taiyo Yuden Co., Ltd. CAUTION
- Please note that this users manual should not be provided to end-users.
- Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the requirement. Notice
- At the installation of our Complete Class2 Bluetooth Module (Model No.: EYBMABA) into the device, following information should be provided with end-user under the responsibility of the manufacture who integrates it into their device. The following sentence has to be displayed on the outside of the device in which the module is installed:
"Contains Transmitter Module FCC ID: RYYEYBMABA/ IC ID: 4389B-EYBMABA", or
"Contains FCC ID: RYYEYBMABA/ IC ID: 4389B-EYBMABA "
FCC Regulatory information CAUTION: To maintain compliance with FCCs RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations.
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may Canada Regulatory information Operation is subject to the following two conditions:
(3) this device may not cause interference, and
(4) this device must accept any interference, including interference that may cause undesired This device complies with Part 15 of the FCC Rules. Operation is subject to the following two Cause undesired operation. conditions:
operation of the device. L'utilisation de ce dispositif est autorise seulement aux conditions suivantes :
(3) il ne doit pas produire de brouillage et l'utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. R&TTE Directive information Hereby [Name of manufacture(*)], declares that this [type of equipment(*)] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC
(*) Note: Please write in your company name and type of equipment into [ ].
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-12-14 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2007-12-14
|
||||
1 | Applicant's complete, legal business name |
TAIYO YUDEN CO., LTD.
|
||||
1 | FCC Registration Number (FRN) |
0008738361
|
||||
1 | Physical Address |
43-1, Yawatabara-machi
|
||||
1 |
Takasaki-shi, Gunma, N/A 370-0024
|
|||||
1 |
Japan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@telefication.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
RYY
|
||||
1 | Equipment Product Code |
EYBMABA
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
H****** K******
|
||||
1 | Title |
Deputy General Manager
|
||||
1 | Telephone Number |
81-27********
|
||||
1 | Fax Number |
81-27********
|
||||
1 |
t******@jty.yuden.co.jp
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Taiyo Yuden Co., Ltd. EMC Center
|
||||
1 | Name |
J******** O******
|
||||
1 | Physical Address |
5607-2 Nakamuroda-machi
|
||||
1 |
Gunma, 370-3347
|
|||||
1 |
Japan
|
|||||
1 | Telephone Number |
81-27********
|
||||
1 | Fax Number |
81-27********
|
||||
1 |
o******@jty.yuden.co.jp
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Taiyo Yuden Co., Ltd. EMC Center
|
||||
1 | Name |
M******** S********
|
||||
1 | Physical Address |
5607-2 Nakamuroda-machi
|
||||
1 |
Gunma, 370-3347
|
|||||
1 |
Japan
|
|||||
1 | Telephone Number |
81-27********
|
||||
1 | Fax Number |
81-27********
|
||||
1 |
m******@jty.yuden.co.jp
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Complete Class2 Bluetooth Module | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Single Modular Approval | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The device with its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
TAIYO YUDEN CO., LTD.
|
||||
1 | Name |
K****** N******
|
||||
1 | Telephone Number |
81-27********
|
||||
1 | Fax Number |
81-27********
|
||||
1 |
k******@jty.yuden.co.jp
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0010000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC