EYSFDCSXX 29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential
& Tentative Bluetooth Module EYSFDCSXX (RF+Baseband (Class 2) USB) Data Report In case you adopt this module and design some appliance, please ask for the latest specifications from the local sales office. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. TAIYO YUDEN 1/17 EYSFDCSXX Document constituent list Control name General Items Absolute maximum ratings Electrical characteristics Electrical characteristics Circuit schematic Outline / Appearance Outline / Appearance Pin Layout Rev. record 24-Sep.-2004> Ver.0.9 Draft 1-Dec.-2004> Ver.1.0 Released 29-Mar-2005>Ver.1.1 Released 29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential
& Tentative Control No. HD-AG-A031272 HD-AM-A031272 HD-AE-A031272 HD-AE-C031272 HD-MC-A031272 HD-AD-A031272 HD-AD-B031272 HD-BA-A031272 Document Page 1/3 3/3 1/1 1/3- 3/3 1/1 1/1 1/2 - 2/2 1/1 1/2 - 2/2 TAIYO YUDEN 2/17 EYSFDCSXX Control No. HD-AG-A031272 (1/3) Control name General Items 29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential
& Tentative Scope This specification (Specification) applies to the hybrid IC EYSFDCSXX for use Bluetooth module
(Product) manufacture by TAIYO YUDEN Co., Ltd. (TAIYO YUDEN) 1. Part Number: EYSFDCSXX (USB I/F Support) Digit3: Customer Code ex) S: TAIYO YUDEN Standard Digit8: Software Code ex) X: TAIYO YUDEN Standard Digit9: Hardware Code ex) X: TAIYO YUDEN Standard
*Part number may be modified for mass production or other cases. Please see m for more information. 2. Function: Radio frequency transfer Module (power class 2). Bluetooth standard Ver 2.0+EDR conformity 3. Application: Note PC, PDA 4. Structure: Hybrid IC loaded with silicon monolithic semiconductor 5. Outline: Connector Type 6. Marking: TBD 7. Features:
-Bluetooth 2.0+EDR conformity
-USB Interface
-Point-to-Multipoint (7 Slaves)
-Encryption
-Hold, Sniff and Park Mode
-Supported Link Type: ACL (Not support Voice Over HCI)
-AFH&Co-existence
-EDR(Enhanced Data Rate) 8. Packing:
Packaging method: TBD Packaging unit:TBD Material of tray: TBD Tray Specification: TBD 9. Terminal: Data input-output (20pin Board to Board Connector) RF input-output (Antenna) 10. Mount: Mounted with M2 screw 11. Notes:
a. Any question arising from this Specification shall be solved through mutual discussion by the parties hereof. radiation. b. This Product is not designed for radiation durable and should not be used under the circumstance of c. The operating conditions of this Product are as shown in this Specification. Please note that TAIYO YUDEN shall not be liable for a failure and/or abnormality which is caused by use under the conditions other than the operating conditions hereof. TAIYO YUDEN 3/17 EYSFDCSXX Control No. HD-AG-A031272 (2/3) Control name General Items 29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential
& Tentative d. This Product mentioned in this Specification is manufactured for use in Note PCs, PDAs and Cellular Phones. Before using this Product in any special equipment (such as medical equipment, space equipment, air craft, disaster prevention equipment), where higher safety and reliability are duly required, the applicability and suitability of this Product must be fully evaluated by the customer at its sole risk to ensure correct and safety operation of those special equipments. Also, evaluation of the safety function of this Product even for use in general electronics equipment shall be thoroughly made and when necessary, a protective circuit shall be added in design stage, all at the customers sole risk. e. TAIYO YUDEN warrants only that this Product is in conformity with this Specification for one year after purchase and shall in no event give any other warranty. f. The warranty period shall be one year. g. Communication between this Product and others might not be established nor maintained depending upon radio environment or operating conditions of this Product and other Bluetooth products. h. This Product is designed for use in products which comply with Bluetooth Specifications (ver 2.0+EDR)
(Bluetooth Specifications). TAIYO YUDEN disclaims and is not responsible for any liability concerning infringement by this Product under any intellectual property right owned by third party in case the customer uses this Product in any product which does not comply with Bluetooth Specifications (the non-complying products). Furthermore, TAIYO YUDEN warrants only that this Product complies with this Specification and does not grant any other warranty including warranty for application of the non-complying products. i. TAIYO YUDEN dose not render updating or upgrading service for the firmware in the Module. j. In order to take tests for getting the certification of each countrys Radio Law with a device incorporating this module, it is necessary to make the software in Host to put the module into test condition. Please contact TAIYO YUDEN for farther details. k. Please evaluate adequately our module incorporated to your products before mass production. l. This Product operates in the unlicensed ISM band at 2.4GHz. In case this Product is used around the other wireless devices which operate in same frequency band of this Product, there is a possibility that interference occurs between this Product and such other devices. If such interference occurs, please stop the operation of other devices or relocate this Product before using this Product or do not use this Product around the other wireless devices. m. Part Number Modification Notice (Bluetooth Modules) Part numbers for sample modules or part numbers you see in this Specification are TAIYO YUDEN standard part numbers. In case of modification made to any modules, to meet requested specifics, the part number will carry a different part number, due to forfeit originality. Additionally, part numbers may be modified based on mass production stage, Bluetooth logo Qualification stage, or other related stages. Please contact TAIYO YUDEN to confirm whether your part number needs to be modified. Please see the following examples for cases that part numbers are modified:
- for specific firmware version (our standard item firmware will be upgraded occasionally)
- for specific BD address (our standard item BD address is owned by TAIYO YUDEN )
- for different baud rate (our standard is 115.2kbps and partly1Mbps)
- for specific USB ID (our standard item USB ID is owned by TAIYO YUDEN or chip manufacture)
- for other related cases (specific or different setting, form, sizes, or display etc..) In case you have applied for Bluetooth Qualification with our standard part number without previous notice to TAIYO YUDEN, we shall not be responsible for any expense that will be required to change its name/number. TAIYO YUDEN 4/17 EYSFDCSXX Control No. HD-AG-A031272 (3/3) Control name General Items 29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential
& Tentative n. Ability of lead free mounting at customer's assembly (Heat resistance of this Product) :Yes Containment of hazardous substance in this Product
*Pb (Lead) : Non use
*Additional RoHS regulation substance (Cd.Hg.Cr+6.PBB.PBDE) :Non use p. In addition when this Product is used under environmental conditions such as over voltage which are not guaranteed ,it may be destroyed in short mode. To ensure the security of customers product, please add an extra fuse or/and a protection circuit for over voltage. This module is still under development, thus specifications do not guarantee both the quality and reliability at the time of shipment. Since the specifications and mass production of the module are not confirmed either, the contents of the technical notes are subject to change without any prior notice. TAIYO YUDEN 5/17 EYSFDCSXX 29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential
& Tentative Control No. HD-AM-A 031272 (1/1) Control name Absolute maximum ratings Absolute maximum ratings Item Supply voltage Input voltage Symbol VDD_3.3V Vin Min.
-0.3
-0.3 Typ. Rating Max. 3.6 Unit V VDD_3.3V+0.3 V Recommendation operating range Symbol Item Supply voltage Supply voltage ripple and spike noise Operation temperature range Storage temperature range VDD_3.3V VDD_rn Topr Tstg Min. 3.15
-25
-30 Rating Max. 3.45 30 75 85 Typ. 3.3 25 25 Remark I/O terminals without USB interface Remark Unit V mVp-p Degrees C Humidity=40%RH Degrees C Humidity=40%RH Note 1 Note 2 Note:
1. Operation temperature range is set to satisfy products electrical characteristics for a short period of time. Refer reliability condition to check the product life cycle if you use this module for a long period of time in the condition other than the Typ. standard. 2. Storage temperature range is the condition for transportation and storage in temporary. TAIYO YUDEN 6/17 EYSFDCSXX 29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential
& Tentative Unit V V V V V V V V Remark IOL=4mA IOH =-4mA V mA Note3,4 mA Note 1,3,4 mA Note3,4 mA Note3,4 mA Note3,4 mA Note3,4 mA Note 2,3,4 Control name Electrical characteristics Control No. HD-AE-A 031272 (1/3) Electrical characteristic DC Specifications The Specification applies for Topr.= 25 degrees C, VDD_3.3V=3.3V Min. No. 3.15 1 Operating Voltage 1
-0.3 2 Input Low Voltage1 3 Input Low Voltage2 USB_D+, USB_D-
/RESET, PIO_X Symbol VDD_3.3V VIL1 VIL2 Parameter Condition 4 Input High Voltage1
/RESET, PIO_X 5 Input High Voltage2 USB_D+, USB_D-
6 Output Low Voltage1 USB_D+, USB_D-
7 Output Low Voltage2 PIO_X 8 Output High Voltage1 USB_D+, USB_D-
9 Output High voltage2 PIO_X VIH1 VIH2 VOL1 VOL2 VOH1 VOH2 0.7xVDD _3.3V 2.0
2.8 VDD_3.3V
-0.4 Typ. 3.3 Max. 3.45 0.8 0.8 VDD_3.3V
+0.3
0.3 0.4
60 15 9 46 45 12 13 180
Iccp1 Icca1 Icca2 Icca3 Icca4 Icca5 Icca6 Continuous Rx Sniff mode (Slave only) Standby mode Send DM1packet (Master) Receive DM1packet (Slave) Hold mode (Slave only) Park mode (Slave only) 10 Peak current 11 Average current1 12 Average current2 13 Average current3 14 Average current4 15 Average current5 16 Average current6 Notes:
1. Sniff mode parameter. Max interval 0050h Min interval 0010h Attempt 0005h Timeout 0005h 2. Park mode parameter. Max interval 0100h Min interval 0010h 3. The consumption current might fluctuate with the condition of radio communication, host performance and test circuit. 4. The value may fluctuate several [mA] depending on Firmware version. TAIYO YUDEN 7/17 EYSFDCSXX Control No. HD-AE-A 031272 (2/3) Control name Electrical characteristics Timing for Power Up/Down Sequence 29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential
& Tentative The Specification applies for Topr.= 25 degrees C, VDD_3.3V=3.3V No. Condition Symbol Min 1 VDD_3.3V Rise Time from 0V to Parameter t1 0 3.15V 2 VDD_3.3V=3.15V to RESET high 3 RESET high to Module Ready 4 RESET pulse width 5 Power on to stable condition 6 7 8
/RESET low to VDD_3.3V off
/RESET High to /RESET Low
/RESET Low to USB_I/F High-Z Notes:
t2 t3 t4 t5 t6 t7 t8 10 6 0 3000 0 Typ Max Unit Remark 2 ms ms Note 1,2 70 3000 ms Note 4,5 2 ms ms Note 3 ms ms Note 4, 5 10 ms 1. This module has an internal FROM and a function to erase/sort unnecessary data if certain HCI commands are issued and consume more than a certain level of free space in the FROM. This operation occurs at every module initialization (power-on). If supply voltage becomes non-defined states during initialization or writing in FROM, data in FROM might be destroyed. If the data in FROM is destroyed, module will not work correctly. Therefore please be sure to stabilize power source before RESET release. In addition please design module peripheral circuits to avoid temporary blackout of power source during operation. Please refer HD-AE-C031272 for HCI command which rewrites FROM data. 2. Input /RESET signal of 10ms and more in condition of VDD_3.3V at over 3.15V. 3. During t5 input or output is unstable and this condition occurs at the following pins.
(PIO_X, USB_DP, USB_DM) This unstable condition of t5 continues until the internal power of 1.8V reaches its steady state after VDD supply. After that, it takes some time to discharge when the unstable condition of PIO pin is output high. Discharged time changes depending on the outside load. Please pull-down PIO pin with a 4.7k ohm resistor to reduce the discharged time. 4. Some of User Settings are stored in FROM writable memory area and FROM free space is controlled by Firmware.When the free space in FROM is lower than certain amount, Defrag automatically starts. Amount of time required for Defrag will vary depending on the environment. Please conduct enough verification for the time required for the customers product under customers environment before use. 5. It may change due to the firmware version. TAIYO YUDEN 8/17 EYSFDCSXX Control No. HD-AE-A 031272 (3/3) Control name Electrical characteristics 29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential
& Tentative VDD_3.3V
/RESET USB_I/F VDD_3.3V
/RESET USB_I/F t2 t1 t7 High-Z High-Z t5 t3 t4 t8 Timing Diagram for Power Up Sequence t6 Timing Diagram for Power Down Sequence TAIYO YUDEN 9/17 EYSFDCSXX 29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential
& Tentative Control No. HD-AE-C 031272 (1/1) Control name Electrical characteristics Module Stack HOST F
I B S U USB HCI Host Transport HCI Implementation Link Manager Link Controller Base Band Radio Note:
The protocol stack in the module is compliant with the Specification of the Bluetooth System V2.0+EDR Bluetooth Module TAIYO YUDEN 10/17 EYSFDCSXX Control No. HD-MC-A 031272 (1/1) Control name Circuit Schematic 29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential
& Tentative Block Diagram Antenna Balun filter CRYSTAL 16 MHz 8Mbit Flash ROM Baseband Micro controller RF Bluetooth Device LDO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Connector VDD_3.3V PIO_0 PIO_1 PIO_6(CH_DATA/WLAN_ACTIVE/) PIO_5 (BT_Active) PIO_4(CH_CLK/BT_PRIORITY) PIO_3 PIO_2 USB D-
USB D+
/RESET UART_TX UART_RX UART_RTS UART_CTS PCM_SYNC PCM_OUT PCM_IN PCM_CLK GND TAIYO YUDEN 11/17 EYSFDCSXX Control No. HD-AD-A031272 (1/2) 1-Dec.-2004 Ver.1.0 TAIYO YUDEN Confidential
& Tentative Control name Outline/Appearance Unit: mm, Tolerances unless otherwise specified: +/-0.2mm 3.1+/-0.35 18.2+/-0.1 1 3
. 0
0
. 1 1 5
. 0 4
. 5
0
. 3 11 20 10 1 2.75 2.5+/-0.1 15.2+/-0.3 28.5+/-0.3 31.0 1 0
. 2
0
. 3 7
. 5
0
. 32
. 7 5 max 3 Indication label Note:
Outline/Appearance data is PRELIMINARY, not guaranteed and subject to change without notice. TAIYO YUDEN 12/17 1-Dec.-2004 Ver.1.0 TAIYO YUDEN Confidential
& Tentative Control name Outline/Appearance 5
. 7 15.0 Mother Board EYSFDCSXX Control No. HD-AD-A031272 (2/2) Recommendation for Module Mouting Note :
a. We recommend cutting motherboard, on which Taiyo Yuden module Mother Board Module 2.0 M in will be mounted, as described in the followings in order to ensure antenna characteristics. In addition we recommend keeping a case away from module antenna area and making the case with materials other than metal. b. c. Please contact Taiyo Yuden for the details of module mountings. TAIYO YUDEN 13/17 1-Dec.-2004 Ver.1.0 TAIYO YUDEN Confidential
& Tentative Control name Outline/Appearance EYSFDCSXX Control No. HD-AD-B031272 (1/1) Indication label (dimension : mm) 5.45 5
. 2 1 3
. 8 00037 A 00 A 000 P/N : EYSFDCSXX R2.9 FCC ID : ************
IC : *************
RYYEYXFDC 4389A-EYXFDC Taiyo Yuden Co., Ltd. Made in Japan 29.0 Material: PET ( UL969 ) / Label color : White TAIYO YUDEN 14/17 EYSFDCSXX Control No. HD-BA-A031272 (1/2) Control name Pin Layout 1-Dec.-2004 Ver.1.0 TAIYO YUDEN Confidential
& Tentative Pin Descriptions Terminal Terminal name Input/Output Description Remark VDD_3.3V Input PIO_0 PIO_1 Input/Output Input/Output PIO_6
(CH_DATA/
WLAN_ACTIVE/) Input/Output
(Input) PIO_5
(BT_Active ) Input/Output
(Output) Input/Output
(Output) Input/Output Input/Output DC3.3V Power supply Reserved, Keep on set side terminal open. Bi-directional with programmable strength internal pull-up/down. Reserved, Keep on set side terminal open. Bi-directional with programmable strength internal pull-up/down. Reserved, Keep on set side terminal open. Bi-directional with programmable strength internal pull-up/down. (WLAN_Active/CH_Data input for Co-existence signaling) Reserved, Keep on set side terminal open. Bi-directional with programmable strength internal pull-up/down. (BT_ Active output for Co-existence signaling.) Reserved, Keep on set side terminal open. Bi-directional with programmable strength internal pull-up/down. (BT_Priority/CH_CLK output for Co-existence signaling) Reserved, Keep on set side terminal open. Bi-directional with programmable strength internal pull-up/down. Reserved, Keep on set side terminal open. Bi-directional with programmable strength internal pull-up/down. Input/Output USB data (Negative) input-output Input/Output USB data (Positive) input-output Input Input Output Output Active low RESET signal with internal weak pull-up Do not Connect Do not Connect Do not Connect Do not Connect Input/Output Do not Connect Do not Connect Do not Connect Input/Output Do not Connect Output Input Input
Ground TAIYO YUDEN 15/17 No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PIO_4
(CH_CLK/
BT_PRIORITY/) PIO_3 PIO_2 USB_D-
USB_D+
/RESET UART_TX UART_RX UART_RTS UART_CTS PCM_SYNC PCM_OUT PCM_IN PCM_CLK GND Note 1 Note 2 Note 2 Note 2 Note 2 Note 2 Note 2 Note 2 Note 3 EYSFDCSXX Control No. HD-BA-A031272 (2/2) Control name Pin Layout Notes 1-Dec.-2004 Ver.1.0 TAIYO YUDEN Confidential
& Tentative 1. Pin1 (VDD_3.3V) is used for power supply of BT module. (MAX 200mA). 2. Strength pull-downs (pull-ups) are equivalent to a few kOhms resistance, but are more accurately modeled as a 40 uA current drain (source). 3. Weak pull-ups can be thought of 1M Ohm connections to VDD, but are more accurately modeled as a -1 uA current source. TAIYO YUDEN 16/17 1-Dec.-2004 Ver.1.0 TAIYO YUDEN Confidential
& Tentative EYSFDCSXX CAUTION: To maintain compliance with FCCs RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. FCC Regulatory Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may Cause undesired operation. Canada Regulatory Information Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. L'utilisation de ce dispositif est autorise seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l'utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Canadian Radio Interference Regulations: This digital apparatus does not exceed Class B limits for radio noise emissions from a digital apparatus as set out in the interference-causing equipment standard entitled Digital Apparatus, ICES-003 of the Industry Canada. Cet appareil numrique respecte les limites de bruits radio lctiques applicables aux appareils numriques de Classe B prescrites dans la norme sur le matriel brouilleur: "Appareils Numriques", NMB-003 dicte par l'Industrie Canada. TAIYO YUDEN 17/17