FCC ID: MK4SG-L-01 S-Guard

Product Specifications Product name S-Guard Model number SG-L-01 Issue date Specification number Rev 1.00 2019/12/18 TDR-SPC-SG-L-01-100 S-Guard SG-L-01 FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. IC Notice This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. L'appareil est conforme au RSS d'exemption de licence d'Industrie Canada. Les oprations sont soumises aux deux conditions suivantes:

(1) Cet appareil ne peut pas causer d'interfrence; Et

(2) lappareil doit accepter toute interfrence, y compris celles qui peuvent entraner un fonctionnement indsirable de lappareil. IC Radiation Exposure statement This device complies with Ic radiation exposure limits setforth foran uncontrolled environment .In order to avoidthe possibility of exceeding the lC radio frequency exposure limits ,human proximity to the antenna shall not be less than 20cm during normal operation. L'appareil est conforme aux limites d'exposition au rayonnement IC spcifies dans un environnement non contrl. Afin d'viter la possibilit de dpasser la limite d'exposition aux RF LC, le corps humain ne doit pas tre moins de 20 cm de l'antenne pendant le fonctionnement normal. TDR-SPC-SG-L-01-100 2 / 12 S-Guard SG-L-01 CE Statement This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. Here by, TAKAYA Corporation declares that the radio equipment type SG-L-01 is in compliance with the Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: 661-1 Ibara-

cho,Ibara-shi,Okayama, Japan https://www.takaya.co.jp CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Adapter: Adapter shall be installed near the equipment and shall be easily accessible. TDR-SPC-SG-L-01-100 3 / 12 S-Guard SG-L-01 Contents FCC Regulations ........................................................................................................... 2 FCC RF Radiation Exposure Statement ........................................................................ 2 1 2 3 Scope of application .............................................................................................. 5 Name of each part .................................................................................................... 5 Specifications ......................................................................................................... 6 3.1 3.2 MAIN UNIT SPECIFICATIONS ........................................................................................................................ 6 ACCESSORY SPECIFICATIONS ........................................................................................................................ 8 AC adapter(modelSG-L-01-AC) ................................................................................................ 8 Rubber feet ................................................................................................................................ 9 Bush ............................................................................................................................................. 9 OPTIONAL ITEMS SPECIFICATIONS ............................................................................................................... 10 Self supporting platform (BASE-SG-L) ...................................................................... 10 3.2.1 3.2.2 3.2.3 3.3.1 3.3 4 Change log .............................................................................................................. 11 TDR-SPC-SG-L-01-100 4 / 12 S-Guard SG-L-01 1 Scope of application This document Applies to security devices using a frequency of 115 kHz. 2 Name of each part SG-L-01 Names and functions of each part are explained. No. Fixer mounting hole Upper cover Main body DC cable outlets Output Adjustment SW Status LED Used to connect fixer when ceiling mounted Cable outlet for stationary use Output mode 01App priority mode Output Adjustment SW 2Min9Max8stage Status for display(lightingon operation, flashingerror) TDR-SPC-SG-L-01-100 5 / 12 S-Guard SG-L-01 3 Specifications 3.1 Main unit specifications Specifications Specifications items detail compatible standards Japanese radio law Standard nameinductive communication equipment CE FCC RoHS European RoHS Directive (2011/65/EU)+(EU 2015/863)Support Electrical Characteristics Supply voltage Current Consumption DC+12(V)10() Under 3.0(A) Power Consumption Under 36(W) Mechanical specifications Transmission frequency Frequency Bandwidth Operating temperature terms Operating humidity terms Tag operation distance 1 unit Weight Main body Body color materials Port Center frequency115.1kHz (Configurable via PC) Center frequency800(Hz) (Standard) 1040() 3085(RH)( No condensation) Wi-dimo tag Attached type (WD-M-AT)4.5(m) Lanyard type(WD-M-WI) 4.5(m) Lanyard type(WD-M2-WI) 4.5(m) 138(W)138 (D)123.5(H)(mm) 750 g white Plastic Case partABS Antenna structure partABS+PC Power input(Terminal block) Slave input(Terminal block) Slave output(Terminal block) 232C transmission Lamp lighting output Terminal block 1 line 1 line 1 line 1 line 1 line Single line : 0.4mm1.2mm(AWG26AWG16) Twisted line : 0.2 1.25 (AWG24 AWG16)bare wire over0.18mm 1 May vary depending on the installation environment and installations Corresponding fixer Specifications Mechanical specifications item Supported screws allowable limit of load 1/4-20UNC Over 4(kg) details TDR-SPC-SG-L-01-100 6 / 12 S-Guard SG-L-01 Dimentions Tolerance1mm unitmm TDR-SPC-SG-L-01-100 7 / 12 S-Guard SG-L-01 3.2 Accessory specifications 3.2.1 AC adapter(modelSG-L-01-AC) Specifications specifications compatible standards EMIstandards-

compliant product Compliance safety standards RoHS with VCCI CLASS B, FCC class B, CISPR 22 class B UL60950-1, European RoHS Directive (2011/65/EU)+(EU 2015/863)support Level standard output Regulation 5060Hz DC12.0V5%

United States of America Energy

(DOE) Rated input voltage AC100VAC240V Frequency Rated voltage Rated electric current Output polarity plug shape Weight External Dimensions 98.546.832.1 mm Cable length Center plus 5.52.1 DC PLUG 300 g input 3.8A AC cable part 1830 mm DC cable part 1200 mm DC relay cable 2000 mm 040 Operating temperature terms Operating humidity terms Storage temperature -2065 595RH Storage humidity 595RH Input specifications Output specifications Mechanical specifications Environmental Characteristics Dimentions unitmm TDR-SPC-SG-L-01-100 8 / 12 S-Guard SG-L-01 3.2.2 Rubber feet Specifications Specifications Mechanical specifications item detail 0.3 g Weight External Dimensions 11.25.1mm Materials Amount polyurethane 8pcs 3.2.3 Bush Specifications Specifications Mechanical specifications item detail Weight External Dimensions 9.03.7mm Amount 0.2 g 1pcs TDR-SPC-SG-L-01-100 9 / 12 S-Guard SG-L-01 3.3 Optional items specifications 3.3.1 Self supporting platform (BASE-SG-L) Specifications Specifications RoHS Dimentions Weight Color Materials Optical items Dimentions Details European RoHS Directive (2011/65/EU)+(EU 2015/863)support 13013080 mm 145 g White ABSPC All screws for mounting1/4-20UNC All length20mm TDR-SPC-SG-L-01-100 Tolerance1mm unitmm 10 / 12 S-Guard SG-L-01 4 Change log Ver No 1.00 2019/12/18 New issue TDR-SPC-SG-L-01-100 11 / 12 S-Guard SG-L-01 TAKAYA Corporation Business Development Group RF Division

[URL]

[Mail]

http://www.takaya.co.jp/

rfid@takaya.co.jp Specifications are subject to change without notice for improvement. TDR-SPC-SG-L-01-100 12 / 12

2023.12.22 Ver0 Print Color : Black 100Size SG-L-01 24000001 MK4SG-L-01 31742-SGL01 2

. 0 2

. 1 2 38.10.2 Size 38.1 21.2mm R1.5 material propertiesWaterproof Paper+ A-One 31377 processing Color Black1Color SEL44157L0 CHO 2023.12.22 FCC_SG-01-L_SEAL SEL44157L0

TAKAYA Corporation

(Date:2023/12/26) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize (TA Technology (Shanghai) Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Nori bug Saeki Print Name: Noritsugu Saeki Business Name : TAKAYA Corporation Job Title:Deputy Business Manager Email Addresssaeki@takaya.co.jp

TAKAYA Corporation To: Federal Communications Commission Date: 2023/12/26 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii)

(KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) TAKAYA Corporation(the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) TAKAYA Corporation(the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Type of Equipment subject to FCC Certification:S-Guard FCC ID:MK4SG-L-01 If you have any questions, please feel free to contact me Sincerely, Signature: Nevitsugu adek Print Name: Noritsugu Saeki Business Name : TAKAYA Corporation Job Title:Deputy Business Manager Email Address:saeki@takaya.co.jp

TAKAYA Corporation Request for Confidentiality Date: January 9, 2024 Subject: Confidentiality Request for: FCC ID:MK4SG-L-01 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term DX Permanent Block Diagrams Short Term External Photos

[_] Short Term L] Permanent*! Internal Photos L] Short Term Permanent Operation Description/Theory of Operation

[_] Short Term Permanent Parts List & Placement/BOM Short Term XX Permanent Schematics L] Short Term (J Permanent Test Setup Photos L] Short Term (J Permanent* Users Manual

*Note! (nsert Explanation as Necessary) TAKAYA Gorporation _ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TCB in the event information regarding the product or the product is made available to the public. TCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, Signature: Ne hiteugu oie kj Print Name: Noritsugu Saeki Business Name : TAKAYA Corporation Job TitleEngineer of certification quality Email Addresssaeki@takaya.co.jp

1 1 1

i i

[TAKAYA Corporation]

[661-1,lbara-cho,lbara-city, Okayama, 715-8503 Japan]

[Ibara-shi,Okayama, 715-8503]

[Japan]

Date: [2023/12/21]

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: [MK4SG-L-01]

US Agent Attestation Statement / Part 2.911(d)(7)

[TAKAYA Corporation] certifies, that as of [2023/12/21], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: [MK4SG-L-01].

[TAKAYA Corporation], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-

related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of

[TAKAYA Corporation] for FCC ID: [MK4SG-L-01]. FRN:[0019582519]

Designated Agent Information:

Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illincis Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: Support@FCCUSAgent.com Sincerely, Company: [TAKAYA Corporation] Designated Agent: FCC US Agent, LLC Company Representative: [N Saeki] Designated Agent Representative: Tim Payne Signature: [Signature] Norirtsage Anes Signature: