FCC ID: 2A734-ACC-WC Wireless charger pad

USER GUIDE Wireless Charger Thoughtful lighting, responsibly designed in London. Thank you for making the switch to Tala. Discover the full Tala family at tala.co.uk COMPLIANCE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received. Including interference that may clause undesired operation. Changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. indicates that electrical and electronic equipment (WEEE) should not be mixed with general household This symbol waste. For recovery and recycling, please take this product to a designated collection point where it will be accepted free of charge. Many retailers offer this in-store. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment. STEP 1 Plug in the wireless charger using a Type-C input and adapter for the following specifications:

Standard charging:

5.0V 2.0A Quick charging devices:

9.0V 1.8A or 12.0V 2.1A. STEP 2 Place the device in the centre of the pad. This will ensure the charging coil in the device and the charging pad align. Phone cases or other materials between the device and the charging pad should be no thicker than 5mm. Join the Community Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: lighttoliveby Tala Studios, 25B Vyner Street, London E2 9DG | hello@tala.co.uk Tala Europe B.V, Bertus Aafjeshove 40, Nieuwegein 3437JN, Netherlands Tala North America, Inc. 2 Research Place, Suite 300, Rockville, MD 20850

Type C Input: 5.0V Wireless charger pad ACC-WC-BLK-01 | Batch MM/YY 2.0A, 9.0V Output: 5W/7.5W/10W/Max 15W FCC ID: 2A734-ACC-WC Tala Energy Ltd 25b Vyner Street, London, E2 9DG Made in China 1.8A, 12.0V 2.1A Type C Input: 5.0V 1.8A, 12.0V 2.1A Wireless charger pad ACC-WC-BLK-01 | Batch MM/YY 2.0A, 9.0V Output: 5W/7.5W/10W/Max 15W FCC ID: 2A734-ACC-WC Tala Energy Ltd 25b Vyner Street, London, E2 9DG Made in China

tala energy ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2A734-ACC-WC To Whom It May Concern, C5266091_X10_Ed.1 Date: 9/24/2022 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Danny Wang Date: 9/24/2022 Title: Engineer 1/1

C5266091_X8_Ed.1 Letter of Authorization Company: tala energy ltd. Address: 25B Vyner Street London E2 9DG United Kingdom Product Name: Wireless charger pad Model Number: ACC-WC-BLK-01 FCC Identifier: 2A734-ACC-WC We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Danny Wang Date: 9/24/2022 Title: Engineer Signature of applicant:

1/1