GV302TP User manual GV302TP 4G WW User Manual EGPRS/LTE Cat-M1/LTE Cat-NB2/GNSS Tracker QSZTGV302TPMGUM0100 Revision: 1.00 TRACGV3SUM001
- 1 -
GV302TP 4G WW User Manual Document Title GV302TP 4G WW User Manual Version Date Status 1.00 2022-07-29 Released Document Control ID QSZTGV302TPMGUM0100 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers. Queclink has not including any undertaken any independent search for additional information that may be in the customers possession. Furthermore, system validation of this product designed by Queclink within a larger electronic system remains the responsibility of the customer or the customers system integrator. All specifications supplied herein are subject to change. information, relevant Copyright This document contains proprietary technical information which is the property of Queclink. Copying of this document, distribution to others or using or communication of the contents thereof is forbidden without express authority. Offenders are liable to the payment of damages. All rights reserved in the event of grant of a patent or the registration of a utility model or design. All specifications supplied herein are subject to change without notice at any time. Copyright Queclink Wireless Solutions Co., Ltd. 2021 QSZTGV302TPMGUM0100
- 2 -
GV302TP 4G WW User Manual Contents 0. Revision History ...............................................................................................................................4 1. Introduction .................................................................................................................................... 5 1.1 Reference ............................................................................................................................... 5 1.2 Terms and Abbreviations ....................................................................................................... 5 2. Product Overview ............................................................................................................................6 2.1. Check Parts List ..................................................................................................................... 6 2.2. Parts List ................................................................................................................................ 7 2.3. Interface Definition ............................................................................................................... 8 3. Getting Started ..............................................................................................................................10 3.1. Open the Case .....................................................................................................................10 3.2. Installing a SIM Card ............................................................................................................10 3.3. Device Status LED ................................................................................................................10 4. CE Declaration ............................................................................................................................... 11 QSZTGV302TPMGUM0100
- 3 -
GV302TP 4G WW User Manual 0. Revision History Revision Date Author Description of change 1.00 2022-07-29 Eddy Qi Initial QSZTGV302TPMGUM0100
- 4 -
GV302TP 4G WW User Manual 1. Introduction The GV302TP 4G WW is a powerful GPS locator designed for vehicle or asset tracking. It has superior receiver sensitivity, fast TTFF (Time to First Fix) and supports EGPRS/LTE Cat-M1/LTE Cat-NB2/GPS tracker. Its location can be monitored in real time or periodically tracked by a backend server or other specified terminals. It has Bluetooth. The GV302TP 4G WW has multiple input/output interfaces that can be used for monitoring or controlling external devices. Based on the integrated @Track protocol, the GV302TP 4G WW can communicate with a backend server through the network to transfer reports of emergency, geo-fence boundary crossings, low backup battery and scheduled GPS position as well as many other useful functions. Users can also use GV302 TP 4G WW to monitor the status of a vehicle and control the vehicle by its external relay output. System integrators can easily set up their tracking systems based on the full-featured @Track protocol. 1.1 Reference SN Document name Remark Table 1.GV302TP 4G WW Protocol Reference
[1]
GV302TPMG @Track Air Interface Protocol The air protocol interface between GV302TP 4G WW and backend server. 1.2 Terms and Abbreviations Table 2.Terms and Abbreviations Abbreviation Description AIN DIN GND RXD TXD Analog Input Digital Input Ground Receive Data Transmit Data QSZTGV302TPMGUM0100
- 5 -
GV302TP 4G WW User Manual 2. Product Overview 2.1. Check Parts List Before starting, check whether the product is intact. If anything is missing, please contact your supplier. Figure 1. Appearance of GV302TP 4G WW QSZTGV302TPMGUM0100
- 6 -
Table 3.Parts List Picture 122*85.2*24.2 mm GV302TP 4G WW User Manual 2.2. Parts List Name GV302TP 4G WW Locator Tracker Cable OBD Cable GPS Antenna (Optional) Debug Cable (Optional) QSZTGV302TPMGUM0100
- 7 -
GV302TP 4G WW User Manual 2.3. Interface Definition 16-pin interface QSZTGV302TPMGUM0100
- 8 -
GV302TP 4G WW User Manual 14-pin interface QSZTGV302TPMGUM0100
- 9 -
GV302TP 4G WW User Manual 3. Getting Started 3.1. Open the Case Figure 2.Open the Case Loosen the screws at the back of the device. 3.2. Installing a SIM Card Open the case and ensure the unit is not powered (unplug the cable and unplug the internal battery). Slide the holder to open the SIM card holder. Insert the SIM card into the slot. Take care to align the cut mark. Close the SIM card holder. Close the case. 3.3. Device Status LED QSZTGV302TPMGUM0100
- 10 -
GV302TP 4G WW User Manual Note:
1. CEL LED cannot be configured. LED CEL
(Note 1) GPS
(Note 2) Device status Device is searching network. Device has registered to network. SIM card needs pin code to unlock. GPS chip is powered off. LED status Fast flashing
(Note 3) Slow flashing
(Note 4) ON OFF GPS sends no data or data format error occurs. Slow flashing GPS chip is searching GPS info. GPS chip has gotten GPS info. PWR
(Note 2) No external power and internal battery voltage is lower than 3.35V. Fast flashing ON OFF No external power and internal battery voltage is below 3.5V. Slow flashing External power in and internal battery is charging. Fast flashing External power in and internal battery is fully charged. ON 2. GPS LED and PWR LED can be configured to turn off after a period of time by using the configuration tool. 3. Fast flashing: for GSM LED is about 60 ms ON/780 ms OFF; for GPS LED and PWR LED is about 100 ms ON/100 ms OFF. 4. Slow flashing: for GSM LED is about 60 ms ON/1940 ms OFF; for GPS LED and PWR LED is about 600 ms ON/600 ms OFF. 4. CE Declaration Hereby, Queclink Wireless Solutions Co., Ltd. declares that the radio equipment type GPS tracker is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.queclink.com/
QSZTGV302TPMGUM0100
- 11 -
Declaration of Conformity Hereby, [Targa Telematics spa] declares that the radio equipment type [designation of type of radio equipment] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
WWW.TARGATELEMATICS.COM Operating Temperature:-20 ~ +60 RF exposure statement RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm dist ance between the device and human body. Max power for WWAN and BT GSM900 32.85 dBm GSM1800 30.23 dBm CATM&NB Band 1 24 dBm Band 3 24 dBm Band 7 24dBm Band 8 24 dBm Band 20 24 dBm Band 28 24 dBm BLE 7dbm FCC Caution. 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Changes or modification warning. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontroll ed environment. This equipment should be installed and operated with minimum distance of 20 c m between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si brouillage est susceptible d'en compromettre le fonctionnement le Declaration of Conformity Hereby, [Targa Telematics spa] declares that the radio equipment type [designation of type of radio equipment] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
WWW.TARGATELEMATICS.COM Operating Temperature:-20 ~ +60 RF exposure statement RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm dist ance between the device and human body. Max power for WWAN and BT GSM900 32.85 dBm GSM1800 30.23 dBm CATM&NB Band 1 24 dBm Band 3 24 dBm Band 7 24dBm Band 8 24 dBm Band 20 24 dBm Band 28 24 dBm BLE 7dbm