User Guide Targus Laser Presentation Remote Introduction Thank you for your purchase of the Targus Laser Presentation Remote. This combination remote with laser pointer, controls both Microsoft PowerPoint and Apple Keynote. This cordless remote also offers true plug-n-play capability with no need for software drivers, whilst long range 2.4 GHz technology allows for effective presentations up to 50 feet (15 m). Contents Targus Laser Presentation Remote Mini USB receiver 2 x AAA batteries User guide System Requirements Hardware USB port Operating System Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows Vista Microsoft Windows 7 Mac OS X 10.4 or later 2 Targus Laser Presentation Remote Setting Up Your Remote Installing the Batteries Press the battery cover release button to open the battery cover and carefully lift the cover as shown. Battery cover release button Battery Cover Insert the supplied batteries, making sure the positive (+) and negative
(-) ends of the batteries match the polarity indicators inside the battery compartment. Spare battery compartment 3 Targus Laser Presentation Remote NOTE: THE SPARE BATTERY COMPARTMENT PROVIDES CONVENIENT STORAGE FOR A SEPARATE BATTERY (INCLUDED) WHICH CAN BE USED FOR EMERGENCY POWER. Remove the mini USB receiver stored inside the center compartment. Slide the battery cover back into position until it clicks firmly into place. 4 Targus Laser Presentation Remote Using your remote Before using the remote, please select your computer type and preferred presentation software. Locate the switch inside the battery compartment as shown. PC PowerPoint Mac KeyNote Mac PowerPoint NOTE: SELECT PC POWERPOINT IF YOU USE A COMPUTER MADE BY: HP/
COMPAQ, DELL, TOSHIBA, GATEWAY, PANASONIC, FUJITSU, SONY, IBM/
LENOVO, ACER, ASUS, ETC. 5 Targus Laser Presentation Remote This remote is a plug-n-play device. It will automatically operate when the USB receiver is connected to the computer. Plug the mini USB receiver into any available USB port on your computer. Turn on the remote by pressing and holding the on/off power button for 3 seconds. 6 Targus Laser Presentation Remote Keys and Functions 3. 4. 6. 10. 11. 2. 5. 1. 8. 7. 9. 7 Targus Laser Presentation Remote Power button Press and hold for 3 seconds to turn on the remote.LED ring will turn green. Press and hold for 3 seconds to turn off the remote.LED ring will shut off. Blank screen button The screen will become blank/dark. Start - Press once to begin. Slide show Stop - Press and hold for 2 seconds to stop the slide show. Page Forward/Next slide Press once to go to next slide. Page Backward/Previous slide Press once to go back one slide. Laser pointer Laser light is emitted from the opening. LED light ring Power and KeyLockTM indicator. KeyLock button Press once to enable KeyLock function.
- Disables all keys except the laser, page forward/next slide and page backward/previous slide buttons.
- LED ring will become RED. Press once to disable the KeyLock function.
- LED ring will return to GREEN. Laser pointer button Press and hold to activate the laser pointer. Volume up button Press to increase the volume. Volume down button Press to decrease the volume. 1 2 3 4 5 6 7 8 9 10 11 8 Targus Laser Presentation Remote Safety Measures To avoid possible eye damage, never point the remotes laser at people, especially their faces, or look directly into the remotes laser beam. Avoid pointing the remotes laser beam at a mirror or other highly-reflective surface. Keep the remote away from young children. Never view the remotes laser beam using telescopic devices, such as a microscope or binoculars. Any attempt to disassemble, adjust or repair the remote may result in exposure to laser light or other safety hazards. Troubleshooting What do I do if the response time of the remote is slow or it intermittently stops working?
Make sure that the remote is within 50 feet (15 m) of the mini USB receiver and computer. Increase the distance between the remotes receiver and the base units of other wireless devices. Turn off any wireless devices and their base units that are near the remotes receiver. Replace the battery. 9 Targus Laser Presentation Remote Technical Support For technical questions, please visit:
US Australia New Zealand Internet: www.targus.com/support.asp Internet: www.targus.com/au Email: infoaust@targus.com Telephone: 1800-641-645 Telephone: 0800-633-222 Product Registration Targus recommends that you register your Targus accessory shortly after purchasing it. Go to:
http://www.targus.com/registration.asp You will need to provide your full name, email address, country of residence and product information. Warranty Targus warrants this product to be free from defects in materials and workmanship for one year. If your Targus accessory is found to be defective within that time, we will promptly repair or replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss. Under no conditions is Targus liable for loss of, or damage to devices; nor loss of, or damage to, programs, records, or data;
nor any consequential or incidental damages, even if Targus has been informed of their possibility. This warranty does not affect your statutory rights. Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 10 Targus Laser Presentation Remote FCC Statement Tested to Comply This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not authorized by the party responsible for compliance could void the users authority to operate this product. Declaration of Conformity Hereby, Targus, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All trademarks and registered trademarks are the property of their respective owners. All rights reserved. Features and specifications are subject to change without notice. 2009. Targus Group International, Inc. and Targus, Inc., Anaheim, CA 92806 USA 11 Targus Laser Presentation Remote AVOID EXPOSURE--HAZARDOUS ELECTROMAGNETIC RADIATION EMITTED FROM THIS APERTURE. LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS 2 LASER PRODUCT. NEVER POINT A LASER BEAM INTO A PERSONS EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSONS EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB. ALTHOUGH THIS CONDITION IS TEMPORARY, IT CAN BECOME MORE DANGEROUS IF THE EXPOSED PERSON IS ENGAGED IN A VISION-CRITICAL ACTIVITY SUCH AS DRIVING. CAUTION: ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. THIS DEVICE AND ITS ANTENNA(S) MUST NOT BE CO-LOCATED OR OPERATING IN CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER. YOUR DEVICE CONTAINS A LOW POWER TRANSMITTER. WHEN DEVICE IS TRANSMITTED IT SENDS OUT RADIO FREQUENCY (RF) SIGNAL. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. 12 S U 3 1 P M A
A 1 0 0
1 8 6 1
0 1 4 1 YEAR LIMITED WARRANTY: We pride ourselves on the quality of our products. For complete warranty details and a list of our worldwide offices, please visit www.targus.com. Features and specifications are sub-
ject to change without notice. All trademarks and reg-
istered trademarks are the property of their respective owners. All rights reserved. 2009 Manufactured or imported by Targus Group International, Inc. (for U.S. sales: 1211 North Miller Street, Anaheim, CA 92806 USA) whose Australian sales representative is Targus Australia Pty. Ltd., 117-119 Bowden Street, Meadow-
bank, NSW 2114 Australia N2953