User Guide Targus Bluetooth Comfort Laser Mouse Introduction Thank you for your purchase of the Targus Bluetooth Comfort Laser Mouse. This mouse uses Bluetooth technology which provides a seamless connection up to 33 ft (10 m) away. This is a plug and play device so no additional software is required. The advance scroll wheel feature program can be downloaded from the Targus web-site. Contents
System Requirements Hardware
Operating System
2000
XP
7
X 10.4 or later 2 Targus Bluetooth Comfort Laser Mouse Installing the Batteries 1. Remove the battery cover from the top of the mouse by using the notch on the back. Carefully lift the cover up as shown in the diagram. 2. Remove the battery safety clip by squeezing the center of the clip and sliding it back, towards the rear of the mouse. Lift up and rotate the clip out of the way. NOTE: THE BATTERY SAFETY CLIP WILL NEED TO BE IN THE SECURE, LOCKED POSI-
TION BEFORE THE BATTERY COVER CAN BE PUT BACK IN PLACE. 3 Targus Bluetooth Comfort Laser Mouse 3. Slide and lift to remove the battery holder as shown. 4. Insert the two AA batteries, making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery compartment. 4 Targus Bluetooth Comfort Laser Mouse 5. Replace the battery safety clip and by sliding it forward until it clicks into place and then replace the battery cover. 6. Turn on the mouse by pressing the power on/off button on the bottom of the mouse. Hold for 3 seconds and then release. Power Button 5 Targus Bluetooth Comfort Laser Mouse Power On:
Press and hold the power button for 3 seconds and then release. The battery life indicator will briey light up showing the current power level of the batteries. Power Off:
Press and hold the power button for 3 seconds and then release. The battery life indicator will briey light up and then fade out. Battery Check:
After the mouse is turned on, quickly press and release the power button. The battery life indicator will light up showing the current power level of the batteries. Initial Mouse Setup Enable Discovery mode:
The mouse will go into pairing mode automatically after it is powered on. The 1st and 3rd LED will ash alternately for 60 seconds; this indicates that the pairing sequence
up steadily for 3 seconds. 1st LED 3rd LED If the connection is not established by the end of 60 seconds, the mouse will go
sequence will re-start automatically. 6 Targus Bluetooth Comfort Laser Mouse Power Saving mode:
power saving mode to conserve power and increase battery life. Click on any mouse button to resume the normal operation. The mouse may take a few seconds to re-
connect with your computer. Battery Life Indicator 3 LEDs lit 2 LEDs lit 1 LED lit Full power Half power Low power NOTE: WHEN THE FIRST LIGHT IS BLINKING, PLEASE REPLACE THE BATTERIES 7 Targus Bluetooth Comfort Laser Mouse Initial Conguration Before you can begin using your Bluetooth mouse, you will rst need to perform some initial setup steps. NOTE: PLEASE USE THE LATEST BLUETOOTH DEVICE DRIVER. INSTRUCTION SCREENS MIGHT VARY DEPENDING ON THE VERSION OF YOUR BLUETOOTH DEVICE DRIVER. 8 Targus Bluetooth Comfort Laser Mouse Connecting with Bluetooth Software:
1. Go to the Bluetooth Places icon located on your desktop or in the system tray and double click, then click Add a Bluetooth Device.
(Windows XP)
2. The Bluetooth Wizard screen will prompt. Please follow the onscreen instructions.
(Windows XP)
9 Targus Bluetooth Comfort Laser Mouse 3. Power on the mouse and it will automactically go into discovery mode. Click Next to continue pairing and the computer will search for the mouse.
(Windows XP)
4. The conrmation window will appear after the computer nishes detecting the Bluetooth devices. Select the Bluetooth Wireless Mouse and click Next to continue. (There may be one or more different Bluetooth devices detected.) If the mouse is not detected, please make sure the power is on and in discovery mode. Press Search Again to re-pair the device.
(Windows XP)
10 Targus Bluetooth Comfort Laser Mouse 5. After selecting the correct device, the computer will nish establishing the connection. Please wait until the setup is completed.
(Windows XP)
11 Targus Bluetooth Comfort Laser Mouse Connecting with Bluetooth Software:
1. Double click on the Bluetooth Manager icon in the system tray, and then click Add New Connection. 2. Power on the mouse and it will automactically go into discovery mode. Click Next to continue pairing and the computer will search for the mouse. 12 Targus Bluetooth Comfort Laser Mouse 3. The computer will now search for the Bluetooth mouse and other Bluetooth devices. Please wait until the search is completed. Choose the device you wish to connect. There may be more than one Bluetooth device detected. Select Bluetooth Wireless Mouse and click Next to continue. If the mouse is not detected, please make sure the mouse is in discovery mode and click Refresh. 4. The computer will begin connecting with the device. 13 Targus Bluetooth Comfort Laser Mouse 5. The connection is established and setup is complete. The device is ready to use. If the connection is not successful, please click Back and search the device again. You can continue to add other Bluetooth devices or close the window. 14 Targus Bluetooth Comfort Laser Mouse Bluetooth Software: Mac 1. Go to the Bluetooth icon located on your desktop or in the system bar and click the
on your Mac.
3. The Bluetooth Setup Assistant will begin. Please follow the on-screen instructions. 15 Targus Bluetooth Comfort Laser Mouse
into discovery mode.
show up in the list. Highlight your mouse and press continue. 16 Targus Bluetooth Comfort Laser Mouse 6. The Bluetooth mouse will now begin pairing. Click continue to proceed. 7. Congratulations. Your Bluetooth mouse is setup and ready to use. You can choose to
17 Targus Bluetooth Comfort Laser Mouse Programming Your Mouse
To access the advanced scroll wheel features you will need to download and install the software driver. This can be downloaded from the following location:
www.targus.com to download and install the driver.
desired setting for the scroll-wheel button. Close the driver software application and youre ready to go. Activate your selected feature by pressing down on the scroll wheel. 18 Targus Bluetooth Comfort Laser Mouse Troubleshooting The mouse is not working.
negative (-) ends of each battery must match the positive (+) and negative (-) connections in the battery housing.
1. Click Start/ Settings/ Control Panel/ System/ Hardware/ Device Manager
out of range or not powered up. 19 Targus Bluetooth Comfort Laser Mouse Technical Support For technical questions, please visit:
US Australia New Zealand Internet: www.targus.com/support.asp Internet: www.targus.com/au Email: infoaust@targus.com Telephone: 1800-641-645 Telephone: 0800-633-222 Product Registration Targus recommends that you register your Targus accessory shortly after purchasing it. Go to:
http://www.targus.com/registration.asp You will need to provide your full name, email address, country of residence and product information. Warranty Targus warrants this product to be free from defects in materials and workmanship for one year. If your Targus accessory is found to be defective within that time, we will promptly repair or replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss. Under no conditions is Targus liable for loss of, or damage to devices; nor loss of, or damage to, programs, records, or data;
nor any consequential or incidental damages, even if Targus has been informed of their possibility. This warranty does not affect your statutory rights. Regulatory Compliance
following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 20 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions:
1) This device may not cause interference and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. Canada Statement This Device complies with RSS-210 of the IC Rules, Operation is subject to the following two conditions:
(1). This device may not cause interference and
(2). This device must accept any interference received,, including interference that may cause undesired operation. Declaration of Conformity Hereby, Targus, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Targus Bluetooth Comfort Laser Mouse CAUTION
22