WHP-210 WHP-i230 Quick Start 1.Charge Headphone 3.5 hours. 2.Connect Transmitter to i-Pod. 3.Turn on Headphone and i-Pod. 4.Wearing the Headphones, hold down the LINK buttons on both the Headphone and the Transmitter until a beep is heard indicating the device are link. 5.Enjoy your wireless experience 1 WHP-i230:
Wireless Music Anywhere SoundOns WHP-i230 is the worlds rst 2.1 wireless headphone with a portable i-Pod trans-
mitter allowing you to go virtually anywhere with your music, but without the wires. Point-one technology takes the traditional headphone with two speaker-drives and enhances the perfor-
mance with the addition of a built-in sub woofer. Point-one technology allows the listener to invite all the low-emission bass sounds life co-exists with. All of SoundOns wireless headphones use Adaptive Frequency Hopping technology ensur-
ing the headphone is always searching for, nd-
ing, and moving to the clearest channel avail-
able. The result is the clearest wireless sound available, which Bluetooths blind hopping and other wireless technologies cannot achieve. 2 Unique Features Based on advanced WiStereoTM digital wire-
less technology for reliable transmission of music in the 2.4 GHz band. Effective within 30 feet range from source. Patented dual-speakers in each of the ear-
cups delivering a full range of sounds as well as a soft, deep bass. The transmitter can be powered by the i-Pod adapter. Extended battery life lasts up to 12 hours when fully charged. Ultra comfortable headband design for long wear hours. 3 Parts Introduction Length adjustment 90 0 1 2 3 4 5 6 7 Next track Previous track LED Indicator LINK Po wer On/Off Charging Po rt Reset 90 0 3 4 1 2 5 6 7 4 1 2 3 4 5 6 7 Next track Skip to next song. Previous track Skip to previous song. LED Indicator A red indicator represents charging func-
tions. A blue indicator represents signal connec-
tions. LINK Press LINK button to connect the wireless headphone and the iPod transmitter. Power On/Off Press this button to control power on/off. Charging Port Connect to the AC power adapter for charg-
ing. Reset If headphone is functioning improperly, poke the reset hole by a paper clip. 5 Getting Started Charging the Headphone Charging AC Power adapter First time use :
Charge 3.5 hours before using headphone for the rst time. Plug in to charge Unplug when nished The headphone is charging. Steady red light is turned off when the head-
phone is fully charged. To ensure this headphone to work properly, please avoid recharging while using. AC Power Adapter is used to both charge the headphone and the transmitter( if batteries are not powering the transmitter). 6 Connecting the Transmitter MENU iPod nano 7 Turning the Headphone On/Off Power on:Press the power button to turn on the headphone. Power off:Press and hold the power button for 2 sec. to turn off the headphone. Link the headphone to the Transmitter Simultaneously press the LINK buttons of both the headphone and the transmitter to connect the signal transmission. 8 User Guide Symbols Steady red light The headphone is charging Steady blue light Device are link Flashing blue light Device are waiting for link Device are not link 9 Product Accessories Wireless Headphone * 1pc iPod Transmitter * 1pc AC Power Adapter * 1pc 10 Trouble Shooting:
No sound emitting from the Headphone 1.Make sure the headphone is charged, and the transmitter is powered . Make sure the trans-
mitter has connected the i-Pod steadily. 2.Check if the music is being played from your i-Pod. 3.Simultaneously press the LINK keys, both on the transmitter as well as on the headphone, for 2-3 seconds until sound returns. 4.In case the music player/source has a low volume output, try Press the volume up key on the iPod. 11 Sound break-up First move around and get closer to the trans-
mitter. The constant sound break-up may have occurred because of the range and radio-wave transmission obstacles. If the i-Pod's batteries are running low , it probably can cause sound break-up. No connection signal visible Make sure the headphone is charged and the transmitter is properly connected to the i-Pod. Within the range of signal coverage, power on the headset again. The headphone automatically shuts off Check to see if the battery life is too low or the indicator light is off. Headphone Malfunction If Headphones are experiencing problems try resetting the Headphones (see P. 2 Reset But-
ton) 12 Speci cation Model Wireless Technology Headphone Listen Time Standby Time Charge Time (full charge) Distance of Use Headphone Weight Transmitter Weight Charging Method Headphone Battery Type Frequency Response Audio Quality Distortion (T.H.D.) Speaker Drivers WHP-i230 WiStereoTM for advanced 2-way digital transmission in the 2.4 GHz frequency band Up to 12 hours (per charge) Up to 3 months Up to 3.5 hours 30 feet 0.47 ounces 1.6 ounces AC Power Adapter Lithium Polymer 20Hz ~30,000Hz (perfect for all music, game, and voice) Uncompressed audio for music
(CD-quality) and voice (extra clar-
ity)
<0.08% (professional grade audio performance) 2 on each side for full-range audio and sub-woofer enhancement with SafeBass technology 30mm Neodymium channels 40mm Neodymium for subwoofer left/right for R 13 Important User Information:
1.Handling the headphone Do not bend, drop, crush, puncture, incinerate, or open the headphone. 2.Repairing the headphone Never attempt to repair the headphone yourself. The headset does not contain any user serviceable parts. For service information, read the Help section from the warranty card. The headphone should be re-
placed only by authorized service providers. 3.Avoiding Hearing Damage, Hearing Experts Suggest Permanent hearing loss may occur if the headphone is used at too high a volume. Set the volume to a safe level. Warning: Over time it is possible to be-
come accustomed to high volumes that may be dam-
aging to your hearing. If you experience a ringing in your ears or your own voice and other sounds ap-
pear muf ed, stop using the headphone and consult a hearing professional. 14 Safety Approvals and Certi cations FCC Statement Both the headphone and the trarnsmitter are compliant with part 15 of the FCC rules. Opera-
tion is subject to the following two conditions:
(1)These devices may not cause harmful inter-
ference, and (2)These devices must accept any interference received, including interference that may cause undesired operation. CE This product is CE marked according to the pro-
visions of the R&TTE Directive. (99/5/EC) 15 FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. WHP-210 Headphones Made In China 16