all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 191.02 KiB | ||||
1 | Block Diagram | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Operational Description | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual | Users Manual | 191.02 KiB |
150V5 Color Monitor Users Manual Contents Introduction ......................................................................................................1 Features ..................................................................................................................................1 For Your Safety .......................................................................................................................1 Installation.........................................................................................................3 Unpacking the Display . ..........................................3 Locations and Functions of Controls ...........................................3 Making the Connections .............................................4 Using Your Display ...........................................................................................5 Turning the Display On and Off ..................................................5 Tilting the Display ..................................................................................................................6 Setting the Video Mode ..........................................................................................................6 Setting the Refresh Rate ...6 Minimizing Power Consumption .. .........................................7 Caring for and Cleaning the Display ...........................................7 Adjusting Your Display ....................................8 Summary of Control Buttons ...........................................8 Displaying the OSD Main Menu .. ..........................................8 Selecting Items in the OSD Menu ...........................................9
++Doing Adjustment in the OSD Menu ....................................10 Using the Direct Keys ...........................................19 Troubleshooting ..............................................................................................21 Technical Information ...................................................................................22 Display Information ...........................................22 Video Modes ..........................................23 Unknown Video Modes ........................................................................................................23 FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT ...24 Introduction This latest LCD monitor has a 15-inch active matrix TFT (thin film transistor) liquid crystal display module. It is designed for use with any Windows-based PC. The monitors compact-sized design provides great space savings on your computer desk. Features Important features include:
Automatic configuration to the PC video settings with maximum XGA resolution.
Three control buttons plus OSD (on-screen display) for monitor settings adjustment and configuration with ease and instant feedback.
Support analog video input for direct and immediate replacement of CRT displays.
A tilt feature to optimize viewing position.
An anti-glare coating on the panel to reduce the reflection of ambient light.
Flicker-free performance across all recommended video modes.
Support for high refresh rates up to 75 Hz.
VESA DDC2B Plug-and-Display compliant.
A Power-saving feature that is compatible with Microsoft Windows
Compliance with Swedish MPR II guidelines for reduced electromagnetic emissions. For Your Safety For your safety and the protection of your monitor, follow these precautions:
Use only the factory-supplied power cord that shipped with your monitor.
To prevent electrical shock, do not disassemble the display. The cover should be removed To completely disconnect power from your display, you must remove the power cord from the wall outlet and then remove the power cable from the display. Warning only by qualified service personnel.
Do not cover the air vents.
To avoid the risk of damage to the display and electrical shock to yourself, do not expose the display to rain or moisture. If any of the following conditions occur, unplug the display and contact qualified service personnel:
The power cord or plug is frayed or damaged.
You have spilled liquid into the display.
The display has been exposed to rain or water.
The display does not operate correctly when the operating instructions are followed.
The display has been dropped or the cabinet has been damaged.
* Only for use with supplied adapter, in case of loss or damage contact the retailer for replacement Installation Please follow the instructions in this chapter to install your LCD Monitor. Note: Before connecting your display, first read through the instructions in this chapter and the safety precautions in the previous chapter. Unpacking the Display When you are unpacking the display, make sure that you have the following items:
The LCD monitor
AC power adapter with attached power cable
A power cord
Analog video signal cable
The User's Manual Note: Place the display on a flat, sturdy surface. Choose an area free from excessive heat, moisture, and sunlight. Locations and Functions of Controls There are three control buttons and one power button on the front panel of the display, as well as a LED for power status indication. You will use the power button located at the lower right side of the front panel of your display to turn on and off the display. The functions of the three control buttons which are located at the lower left side of the front panel of your display. Their functions are described as below:
Button Select Up (
) Down (
) Function Description
(1) Turn on OSD menu while it is off.
(2) Execute the function selected in the OSD menu.
(3) Hold down for 2 sec will clear OSD menu.
(1) Item selection move upward or user-adjustable value increasing. (in Main Menu).
(2) Brightness (Direct-key function)
(1) Item selection move downward, user-adjustable value decreasing (in Main Menu)
(2) Auto Setup (Direct-key function). Making the Connections Before connecting any cables, make sure that the computer and display are turn off. To connect the power and video signal cables:
1. Locate the AC power adapter with attached power cable. 2. Connect the power cable to the power jack on the back of the display (as shown below). 3. Plug the two-prong power cord into a power outlet, and plug the other end into the AC power adapter. Plug the analog video signal cable into the Analog Video Input port on the back of the display DC Power Cable Main Power VGA C Analog S DC Jack Adapter
(as shown above). 4. Connect the other end of the video cable into your computers video port. (Please check your computers documentation if youre not sure where the port is located.) Note: For best display performance, it is strongly recommended that you use Auto Setup to Using Your Display automatically configure your displays settings. This chapter contains information about using your LCD Monitor. Turning the Display On and Off Use the power button located at the lower right side of the front panel of the display to turn the display on and off. When the display is on, the light (LED) near the Power button is illuminated. The light is green when both the display and PC are active and amber when the display is in a reduced power mode. If your PC supplies power saving signals to the display, the displays power management features reduce power consumption to low levels when your PC goes into its power-saving mode. See Minimizing Power Consumption on page 7 for more information. If your PC doesnt use industry standard power-save signaling techniques, you can reduce power consumption by turning off the display when it wont be used for an extended period. You can turn the display off even if you leave your PC in running. Note: Because of the technology used in LCD panels, screen savers will not prolong the life of your display. So if the display will not be used for an extended period, be sure to turn it off. Warning To completely disconnect power from your display, you must remove the power cord from the wall outlet and then remove the power cable from the display. Tilting the Display The monitors have a tilt feature that allows you to tilt the display back and forth as well as left and right to find the most comfortable viewing position. To tilt the display, grasp the sides and push the display back or pull it toward you, or turn it left or right until it is in the desired position. The display can be tilted 20 backward and 5 forward. Note: Do not tilt the display by grasping the top edge. Setting the Video Mode Since the inherent format of this display is 1024 pixels by 768 lines, the display will perform best when your PC is set to a screen resolution of 1024 x 768. If you use a lower resolution (such as 640 x 480), the image is expanded to fill the screen. Your display supports many common video modes, as shown in Video Modes on page 24. Check the documentation supplied with your PC and video adapter card to find out which modes they support. To see what the video mode in your Microsoft Windows, please check Windows settings in your PC. Setting the Refresh Rate The image refresh rate is the number of times per second that the image is refreshed; it is also known as the vertical frequency. On standard CRT displays, we recommend that you should use the highest possible refresh rate supported by your PC at the current screen resolution. This is necessary to avoid screen flickering and to minimize eyestrain. However, with your LCD Monitor, flicker is not an issue. It is flick-free at all supported refresh rates. The table in Video Mode on page 24 shows the image refresh rates supported by the display at different screen resolution. Although your LCD monitor supports up to 75 Hz for analog video input, we recommend that you use 60 Hz refresh rate for best performance. To set the refresh rate with a standard Windows installation, follow the steps mentioned in your Windowss or graphic cards users manual. Minimizing Power Consumption Many PCs support industry standard power-save signaling techniques. Power management features reduce the displays power consumption after a period of keyboard inactivity. When the display is in a power-saving mode, the screen is blank and the power indicator is amber. Pressing a key on the keyboard or moving the mouse restores the image in several seconds. Consult your PC documentation for information about setting the power-saving modes. The display accepts the signals for the three standard power-saving modes Standby, Suspend, and Sleep. For any of these conditions, the display will go into Sleep mode. Caring for and Cleaning the Display To maximize screen life and prevent damage to the LCD panel, we recommend that you:
Use the display power management system (if available on your PC).
If you dont use a power management system, turn off the display when you wont be using it for an extended period. Warning
Dont press, rub, or poke the display with your finger or other object.
Handle your display with care. Your LCD module is a high-quality optical device that requires special care when cleaning. To clean the screen:
1. Shut down the PC. 2. Turn off and unplug the display. 3. Gently dust the screen with a dry, soft, line-free cloth. Note: If the screen is still dirty, you can dampen the cloth with several drops of distilled water. Make Dont use liquid, aerosol, or abrasive cleaning solutions to clean the screen. sure the LCD panel is completely dry before you turn the display back on. 4. Plug in the display. 5. Turn on your PC and display. Adjusting Your Display This chapter contains information about how to changing display settings for your LCD Monitor. It is designed with an OSD menu to help you easily adjust to its optimum performance. Note: You must perform auto setup before making any adjustment. Summary of Control Buttons There are three control buttons located at the lower part of the front panel of your display:
Select: Display the On-Screen Display (OSD) Main Menu , selects items for user adjustment, and execute the function selected. Note: Hold down this key for 2 seconds will clear OSD menu.
Up(
): Move upward through the choice in the OSD submenu. If an adjustment bar is displayed, this button increases the setting value. Note: This key is also used as direct key. When the OSD Main Menu is inactive, press this key will execute Brightness function.
Down(
): Move downward through the choice in the OSD submenu. If an adjustment bar is displayed, this button decreases the setting value. Note: This key is also used as direct key. When the OSD Main Menu is inactive, press this key will execute Auto Setup function. Displaying the OSD Main Menu You can use the OSD features to change the screen settings of your display. To display the OSD Main Menu, please press the Select button. The following table briefly describes each of the items in the OSD Main Menu. Item Description Auto Setup Doing the Auto Setup function. See Doing Auto Setup on page 10. Management Clock/Phase Color OSD Display Open the Management submenu where you can select Brightness, Contrast or the image position for further adjustment. See Doing Adjustment in the Management Submenu on page 11. Open the Clock/Phase submenu where you can select Clock or Phase for further adjustment. See Doing Adjustment in the Clock/Phase Submenu on page 13. Open the Color submenu where you can select Color Temperature, RGB and Black Level for further adjustment. See Doing Adjustment in the Color Submenu on page 14. Open the OSD Display submenu where you can select H. position or V. position of the OSD display for further adjustment. See Doing Adjustment in the OSD Display Submenu on page 16. Factory Recall Recall factory-setting values back. See Doing Factory Recall on page 17. Open the Language submenu where you can select one of the five languages for your preference in display OSD messages. See Selecting Language for Your Preference on page 18. Clear and exit the OSD main menu. Language Exit Selecting Items in the OSD Menu To select items in the OSD Main Menu , you will use the Up(
buttons on the front panel of the display.
) or Down(
) or Down(
To select items in the OSD submenus, you will use all three control buttons. To select a specific submenu, you shall use Up(
buttons to move forward or backward to the item to be adjusted, and then select it by press Select button.
) Doing Adjustment in the OSD Menu Doing Auto Setup To doing the Auto Setup function you should follow the steps below:
1. Bring-up the OSD Main Menu. 2. The Auto icon should be highlighted already. 3. Use Select button to select and execute the Auto Setup function. After the execution of the Auto Setup function, it will show-up the follow message:
If the image looks correct, choose Yes. OR If the image requires further adjustment, choose No, it will shown up Phase bar for your further adjustment by manual. Then you can adjust phase by Up(
buttons. When all text appears well focused and there is no instability in the image, press the Select key to end up the adjustment. or Down(
) Doing adjustment in the Management Submenu To do adjustment in the Management submenu you should follow the steps below:
1. Bring-up the OSD Main Menu.
) 2. Use Up(
) to move forward (or backward) to the management icon
(or Down(
) and highlight it. 3. Use Select key to enter the Management Submenu. It will show up four items for your further adjustment. If Brightness buttons to adjust the setting of brightness. The fullness of the graphic bar as well as the numerical value at the right corner are also changed accordingly. is selected, you may use Up(
or Down(
) is selected, you may use Up(
If Contrast buttons to adjust the setting of contrast. The fullness of the graphic bar as well as the numerical value at the right corner are also changed accordingly. or Down(
) Note: We recommend you do Auto Setup before adjusting the contrast setting.
) or Down(
If H. position is selected, you may use Up(
buttons to adjust the setting of the horizontal position of the image. The fullness of the graphic bar as well as the numerical value at the right corner are also changed accordingly.
) If V. position is selected, you may use Up(
buttons to adjust the setting of the vertical position of the image. The fullness of the graphic bar as well as the numerical value at the right corner are also changed accordingly. or Down(
) If Exit is selected, it will exit the Management submenu and back to the Main Menu. Doing adjustment in the Clock/Phase Submenu To do adjustment in the Clock/Phase submenu you should follow the steps below:
1. Bring-up the OSD Main Menu.
) 2. Use Up(
) to move forward (or backward) to the clock/phase icon
(or Down(
) and highlight it. 3. Use Select key to enter the Clock/Phase Submenu. It will show up two items for your further adjustment. If Clock is selected, you may use Up(
buttons to adjust the setting of clock. The fullness of the graphic bar as well as the numerical value at the right corner are also changed accordingly. or Down(
) Note: We recommend you do Auto Setup first. And adjusting the clock setting only if the image looks incorrect. is selected, you may use Up(
If Phase buttons to adjust the setting of phase. The fullness of the graphic bar as well as the numerical value at the right corner are also changed accordingly. or Down(
) Note: We recommend you do Auto Setup and to see whether the phase needs to adjust or not. Doing adjustment in the Color Submenu If Exit is selected, it will exit the Clock/Phase submenu and back to the Main Menu. To do adjustment in the Color submenu you should follow the steps below:
1. Bring-up the OSD Main Menu. 2. Use Up(
) highlight it.
(or Down(
) to move forward (or backward) to the color icon and 3. Use Select button to enter the Color submenu. It will show up three items for your further adjustment. is selected, you may use Up(
If Color Temp one of the three settings. Press Select submenu.
) or Down(
) buttons to select button will return you back to the Color Note: As you choose an item, your screen will immediately updates to reflect this setting. If Black Level Adjust or Down(
Up(
) is selected, it will bring-up Back Level Adjust
) submenu. Use buttons to choose and highlight one of the three options (Red, Green and Blue) and then use Select corresponding bar on menu, and you can adjust its setting by Up(
and Down(
buttons. This control may be helpful in achieving a more natural appearance in graphic images and closer color matching between the printer and the display. button to select it. This will show-up the
) If RGB Adjust is selected, the same sequence as RGB Adjust will be followed. Doing Adjustment in the OSD submenu If Exit is selected, it will exit the Color submenu and back to the Main Menu. To adjust OSD H. and V. positions you should follow the steps below:
1. Bring-up the OSD Main Menu. 2. Use Up(
(or Down(
) to move forward (or backward) to the OSD display icon and highlight it. 3. Use Select button to enter the OSD Display submenu. It will show up two items for your further adjustment.
) or Down(
If H. Position is selected, you may use Up(
buttons to adjust the setting of H. position of the OSD display. The fullness of the graphic bar as well as the numerical value at the right corner are also changed accordingly. If V. Position is selected, you may use Up(
buttons to adjust the setting of V. position of the OSD display. The fullness of the graphic bar as well as the numerical value at the right corner are also changed accordingly. If Exit is selected, it will exit the Clock/Phase submenu and back to the Main Menu. or Down(
) Doing Factory Recall To recall factory settings back you should follow the steps below:
1. Bring-up the OSD Main Menu. 2. Use Up(
(or Down(
) to move forward (or backward) to the factory recall icon and highlight it. 3. Use Select button to activate the factory recall action. Selecting Language for Your Preference To select one of the five languages for your preference you should follow the steps below:
1. Bring-up the OSD Main Menu. 2. Use Up(
) to move forward (or backward) to the languages icon
(or Down(
) and highlight it. 3. Use Select button to enter the Language
(or Down (
your selection. Use Up(
languages you prefer and Press Select
) button to select it. submenu. It will show up five items for
) to move forward (or backward) to the
) Note: As you choose an item, your OSD information displayed immediately updates to reflect this setting. Exit and Clear the OSD Menu To exit and clear the OSD menu you should use Up(
(or backward) to the exit icon and select it by Select
(or Down(
) button.
) to move forward Using the Direct Keys There are two direct keys that function while OSD Main Menu is inactivated. One of the two direct keys is for Auto Setup and the other is for bringing-up OSDBrightnessmenu. Auto Setup by Direct Key Use Auto Setup whenever you apply a new video mode or change the refresh rate. While the Auto Setup routine is running, you should have a stable image displayed on the screen. Do not move items around the screen, play games, or view video during Auto Setup. Once you have executed Auto Setup for a particular mode, the display will store the new values in its permanent memory. To execute Auto Setup by direct key 1. Press Down (
) button with no OSD Main Menu displayed on screen, this will start the execution of Auto Setup. The image will change color and appear to jitter during the Auto Setup routine running. After the routine is complete, you are asked whether the image appears correct or not. If the image looks correct, choose Yes, and then the OSD will close automatically. OR If the image requires further adjustment, choose No, it will shown up Phase further adjustment by manual. Then you can adjust the phase by Up(
) or bar for your Down(
) buttons. When all text appears well focused and there is no instability in the image, press the Select key to end the adjustment and close the OSD menu. Brightness by Direct Key button with no OSD Main Menu displayed on screen, this will start the
) To execute Brightness by direct key Press Up(
execution of Brightness. Troubleshooting This chapter contains information about how to troubleshoot your LCD Monitor. If you have tried all of the items listed below, please contact a qualified service personnel. A. My display doesnt work, even though the computer appears to work. 1. Make sure the power cable is securely plugged into the display. 2. Make sure the display is turned on. 3. Try turning the display off and then turning it on again. 4. Make sure the displays power cord is plugged into a power outlet and into the AC power adapter. Check to see whether the outlet works by plugging another device (such as a lamp) into the outlet. (If the light on the front of the display is lighted, it is getting power. Try the next item on this procedure.) 5. Check the cable connection between the display and the computer. The cable connectors must be pushed in all the way. B. The message Check Cable appears on my display. This message appears when the video cable is not properly connected to the computer. 1. Make sure the analog video cable is plugged into the Analog Video Input port on the back of the display. 2. Make sure the other end of analog video cable is plugged into the PCs video port. C. The message Signal Out of Range appears on my display. This message appears when the input signal is beyond the display's capability. Set your PC to a supported video mode, preferably 1024 x 768 at 60 Hz. See Setting the Video Mode on page .6 D. The image is very unstable. 1. Set your PC to a supported video mode, preferably 1024 x 768 at 60 Hz. See Setting the Video Mode on page 6. 2. Restore the original factory settings by choosing Factory Recall in the OSD Factory Recall submenu. 3. Perform the Auto Setup function. See Auto Setup by Direct Key on page 19. Note: Even if your PCs setting is out of the range of video modes that are supported by your LCD monitor, it may still be displayed with reduced quality. This provides you with an opportunity to change your PCs setting to a correct one. Technical Information This chapter contains technical information about your LCD Monitor. Display Information LCD Module Display Size Viewing Angle Left/Right Up/Down Display Colors Power Input Power consumption Signal Input 15-in, active matrix TFT, anti-glare coating, 0.297 mm pixel pitch 304.1 mm x 228.1 mm
-60 / 60
-55 / 45 262144 100 ~ 240 VAC Full Range, 50/60 Hz (External AC adapter) Operation Mode : 30W max Off Mode : 2W max RGB positive 0.7VPP, 75ohm Separate & Composite, TTL Level 56 Hz ~ 75 Hz 31.5 kHz ~ 60 kHz Video Signal Sync signals Line (horizontal) frequency Raster (vertical) frequency Pixel dot clock 80 MHz (maximum) Recommended mode 1024 x 768 @ 60 Hz Pedestal tilt Dimensions
(W x H x D) Net Weight Gross Weight Operating Conditions 20 forward, -5backward 341mm x 317mm x 140mm 341mm x 338mm x68mm (pedestal fold) 3.0 kg 4.5 kg 5 ~ 40C at altitude 0 ~ 2000m 5 ~ 30C at altitude 2000 ~ 3000m 20% ~ 85% RH, non-condensing 3000m Max.
-20 ~ 60C 5% ~ 95% RH 10000m Max. Temperature Humidity Altitude Storage Conditions Temperature Humidity Altitude Video Modes Your LCD monitor supports the following industry-standard combinations of screen resolution and refresh rates. Other combinations are possible, but may require adjustments to the image. For optimum performance, set your PC to a screen resolution of 1024 x 768 at a 60 Hz refresh rate. Supported Resolution
(dots x lines) Vertical Frequency
(Refresh Rate) VGA SVGA XGA US TEXT Power MAC 640 x 350 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1024 x 768 720 x 400 640 x 480 832 x 624 70 Hz 60 Hz 70 Hz 72 Hz 75 Hz 56 Hz 60 Hz 70 Hz 72 Hz 75 Hz 60 Hz 70 Hz 72 Hz 75 Hz 70 Hz 67 Hz 75 Hz Note: The display is capable of going beyond these recommended modes. Unknown Video Modes Like all other monitors, your LCD monitor is designed to work with standard video modes. However, not all video/graphic cards use only standard display modes. Your LCD monitor uses state-of-the-art technology, which is designed to synchronize to any display mode. We recommend choosing one of the supported modes listed above. If you choose an unknown mode, you will need to manually adjust the clock, phase, and image position. If you must use an unknown mode, you can run Auto Setup at first. If Auto Setup doesnt provide adequate image adjustment, then you must manually adjust the clock, phase, horizontal position, and vertical position. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2004-04-14 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2004-04-14
|
||||
1 | Applicant's complete, legal business name |
Tatung Company
|
||||
1 | FCC Registration Number (FRN) |
0008260234
|
||||
1 | Physical Address |
22 Chungshan N Road Sec 3
|
||||
1 |
Taipei 10451, N/A
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
k******@emcc.de
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BJM
|
||||
1 | Equipment Product Code |
L5CNS
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C**** C********
|
||||
1 | Title |
Director
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
c******@tatung.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Color Monitor | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
DEKRA Testing and Certification Co., Ltd.
|
||||
1 | Name |
S******** H****
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
s******@quietek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | CE |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC