FCC ID: 2ACCJH137 5G NR/LTE/WCDMA/GSM Mobile Phone

Safety and warranty information Thank you for choosing TCL. This booklet helps you get started with your new device. T601DL English Printed in China This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found on page 32 of this user guide. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 15 mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call. www.sar-tick.com Safety and use Please read before using your phone THE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE PHONE IS CHARGING. Privacy restrictions Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded. Always obey the relevant laws and regulations of your country when using the recording feature of your phone. Disclaimers ANY WEATHER, STOCK, OR OTHER INFORMATION, DATA, OR DOCUMENTATION (ACCESSED INFORMATION) ARE PROVIDED AS IS AND WITHOUT ANY WARRANTY OR ANY TECHNICAL SUPPORT. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, TCL MOBILE AND ITS AFFILIATES expressly disclaim any and all representations and warranties, arising by law or otherwise, related to the Accessed Information, including without limitation any express or implied representation or warranty of merchantability, fitness for a particular purpose, non-infringement, quality, accuracy, completeness, effectiveness, reliability, or usefulness. Without limiting the foregoing, it is further understood that TCL Mobile and its Affiliates are not responsible for any use of the Accessed Information or the results arising from such use, and that you use such information at your own risk. 1 Limitation of damages TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL TCL MOBILE OR ITS AFFILIATES BE LIABLE TO YOU, ANY USER, OR THIRD PARTY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES OF ANY KIND, ARISING IN CONTRACT, TORT, OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF PROFITS, REGARDLESS OF THE FORESEEABILITY THEREOF OR WHETHER TCL MOBILE OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. AND IN NO EVENT SHALL THE TOTAL LIABILITY OF TCL MOBILE OR ITS AFFILIATES EXCEED THE AMOUNT RECEIVED FROM YOU, REGARDLESS OF THE LEGAL THEORY UNDER WHICH THE CAUSE OF ACTION IS BROUGHT. THE FOREGOING DOES NOT AFFECT ANY STATUTORY RIGHTS WHICH MAY NOT BE DISCLAIMED. Important health information and safety precautions When using this product, the safety precautions below must be taken to avoid possible legal liabilities and damages. Retain and follow all product safety and operating instructions. Observe all warnings in the operating instructions on the product. To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment, observe the following precautions. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Electrical safety This product is intended for use when supplied with power from the designated battery or power supply unit. Other usage may be dangerous and will invalidate any approval given to this product. Safety precautions for proper grounding installation CAUTION: Connecting to improperly grounded equipment can result in an electric shock to your device. Safety precautions for power supply unit Use the correct external power source A product should be operated only from the type of power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your authorized service provider or local power company. For a product that operates from battery power or other sources, refer to the operating instructions that are included with the product. This product should be operated only with the following designated power supply unit(s). Travel charger: Input: 100-240V, 50/60Hz, 0.5A Output: 5.0V/9V/12V, 3.0A/2.0A/1.5A 2 Take extra precautions Do not attempt to open the back cover;

Do not attempt to eject, replace, or open the battery;

Do not puncture the back cover of your phone;

Do not burn or dispose of your phone in household garbage or store it at temperature above 60C (140F);

Phone and battery as a unibody device must be disposed of in accordance with locally applicable environmental regulations. This symbol on your phone, the battery, and the accessories mean that these products must be taken to collection points at the end of their life:

Municipal waste disposal centers with specific bins for these types of equipment;

Collection bins at points of sale. They will then be recycled, preventing substances from being disposed of in the environment, so that their components can be reused. Safety precautions for direct sunlight Keep this product away from excessive moisture and extreme temperatures. Do not leave the product or its battery inside a vehicle or in places where the temperature may exceed 140F (60C), such as on a car dashboard, window sill, or behind a glass that is exposed to direct sunlight or strong ultraviolet light for extended periods of time. This may damage the product, overheat the battery, or pose a risk to the vehicle. PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. Safety in aircraft Due to the possible interference caused by this product to an aircrafts navigation system and its communications network, using this devices phone function on board an airplane is against the law in most countries. If you want to use this device when on board an aircraft, remember to turn off your phone by switching to Airplane Mode. Environment restrictions Do not use this product in gas stations, fuel depots, chemical plants or where blasting operations are in progress, or in potentially explosive atmospheres such as fueling areas, fuel storehouses, below deck on boats, chemical plants, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Please be aware that sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. 3 Explosive atmospheres When in any area with a potentially explosive atmosphere or where flammable materials exist, the product should be turned off and the user should obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised not to use the equipment at refueling points such as service or gas stations, and are reminded of the need to observe restrictions on the use of radio equipment in fuel depots, chemical plants, or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. These include fueling areas, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Road safety Full attention must be given to driving at all times in order to reduce the risk of an accident. Using a phone while driving (even with a hands-free kit) may cause distraction and can lead to an accident. You must comply with local laws and regulations restricting the use of wireless devices while driving. Safety precautions for RF exposure Avoid using your phone near metal structures (for example, the steel frame of a building). Avoid using your phone near strong electromagnetic sources, such as microwave ovens, sound Use only original manufacturer-approved accessories, or accessories that do not contain any speakers, TV and radio. metal. Use of non-original manufacturer-approved accessories may violate your local RF exposure guidelines and should be avoided. Interference with medical equipment functions This product may cause medical equipment to malfunction. The use of this device is forbidden in most hospitals and medical clinics. If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Nonionizing radiation Your device has an internal antenna. This product should be operated in its normal-use position to ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. 4 Use only the supplied integral antenna. Use of unauthorized or modified antennas may impair call quality and damage the phone, causing loss of performance and SAR levels exceeding the recommended limits as well as result in non-compliance with local regulatory requirements in your country. To assure optimal phone performance and ensure human exposure to RF energy is within the guidelines set forth in the relevant standards, always use your device only in its normal-use position. Contact with the antenna area may impair call quality and cause your device to operate at a higher power level than needed. Avoiding contact with the antenna area when the phone is IN USE optimizes the antenna performance and the battery life. Electrical safety Accessories Use only approved accessories. Do not connect with incompatible products or accessories. Take the necessary precautions not to touch or allow metal objects, such as coins or key rings, to contact or short circuit the battery terminals. Connection to a car Faulty and damaged products Seek professional advice when connecting a phone interface to the vehicle electrical system. Do not attempt to disassemble the phone or its accessory. Only qualified personnel must service or repair the phone or its accessory. General precautions You alone are responsible for how you use your phone and any consequences of its use You must always switch off your phone wherever the use of a phone is prohibited Use of your phone is subject to safety measures designed to protect users and their environment Avoid applying excessive pressure to the device Do not apply excessive pressure on the screen and the device to prevent damaging them and remove the device from your pants pocket before sitting down. It is also recommended that you store the device in a protective case and only use the device stylus or your finger when interacting with the touch screen. Cracked display screens due to improper handling are not covered by the warranty. Device getting warm after prolonged use When using your device for prolonged periods of time, such as when youre talking on the phone, charging the battery or browsing the Web, the device may become warm. In most cases, this condition is normal and therefore should not be interpreted as a problem with the device. 5 Heed service markings Except as explained elsewhere in the Operating or Service documentation, do not service any product yourself. Service needed on components inside the device should be done by an authorized service technician or provider. Protect your phone free place. Always treat your phone and its accessories with care and keep them in a clean and dust-

Do not expose your phone or its accessories to open flames or lit tobacco products. Do not expose your phone or its accessories to liquid, moisture or high humidity. Do not drop, throw or try to bend your phone or its accessories. Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its Do not paint your phone or its accessories Do not attempt to disassemble your phone or its accessories, only authorized personnel Do not expose your phone or its accessories to extreme temperatures, maximum 140F accessories. must do so.

(60C). Please check local regulations for disposal of electronic products. Do not carry your phone in your back pocket as it could break when you sit down. Damage requiring service Unplug the product from the electrical outlet and refer servicing to an authorized service technician or provider under the following conditions:

Liquid has been spilled or an object has fallen into the product. The product has been exposed to rain or water. The product has been dropped or damaged. There are noticeable signs of overheating. The product does not operate normally when you follow the operating instructions. Avoid hot areas The product should be placed away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Avoid wet areas Never use the product in a wet location. Avoid using your device after a dramatic change in temperature When you move your device between environments with very different temperature and/or humidity ranges, condensation may form on or within the device. To avoid damaging the device, allow sufficient time for the moisture to evaporate before using the device. 6 NOTICE: When taking the device from low-temperature conditions into a warmer environment or from high-temperature conditions into a cooler environment, allow the device to acclimate to room temperature before turning on power. Avoid pushing objects into product Never push objects of any kind into cabinet slots or other openings in the product. Slots and openings are provided for ventilation. These openings must not be blocked or covered. Do not place a phone in the area over an air bag or in the air bag deployment area. Store the phone safely before driving your vehicle. Air bags Mounting accessories Do not use the product on an unstable table, cart, stand, tripod, or bracket. Any mounting of the product should follow the manufacturers instructions and should use a mounting accessory recommended by the manufacturer. Avoid unstable mounting Do not place the product on an unstable base. Use product with approved equipment Adjust the volume Cleaning Small children This product should be used only with personal computers and options identified as suitable for use with your equipment. Turn down the volume before using headphones or other audio devices. Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning, but NEVER use water to clean the LCD screen. Do not leave your phone and its accessories within the reach of small children or allow them to play with it. They could hurt themselves or others or could accidentally damage the phone. Your phone contains small parts with sharp edges that may cause an injury, or which could become detached and create a choking hazard. Repetitive motion injuries To minimize the risk of RSI, when Texting or playing games with your phone:

Do not grip the phone too tightly Press the buttons lightly Make use of the special features in the handset which minimize the number of buttons which have to be pressed, such as message templates and predictive text. Take lots of breaks to stretch and relax. 7 Full attention must be given to operating the machinery in order to reduce the risk of an accident. This phone is capable of producing loud noises which may damage your hearing. Operating machinery Loud noise Emergency calls This phone, like any wireless phone, operates using radio signals, which cannot guarantee connection in all conditions. Therefore, you must never rely solely on any wireless phone for emergency communications. Not all 911 emergency service providers are capable of receiving location information. Be prepared to report your precise location/address when calling 911. The device location cannot be identified in all circumstances. Regulatory agency identifications For regulatory identification purposes, your product is assigned a model number of T601DL. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your T601DL device. Operating temperature range: 32F to 104F (0C to 40C) NOTE: This product is intended for use with a certified Class Limited Power Source, rated 4.35 Volts DC, maximum 1 Amp power supply unit. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio or television technician for help FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. 8 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Electronic labeling path: Touch Settings > System > Regulatory & Safety or press *#07#, you can find more information about labeling (1), such as FCC ID. Important Note Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instruction as documented in this manual. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the transmitters built-in with the device. US Information Concerning the Federal Communications Commission (FCC) Requirements for Hearing Aid Compatibility with Wireless Devices When wireless devices are used near hearing devices (such as hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference, and wireless devices also vary in the amount of interference that they generate. The wireless telephone industry has developed ratings to assist hearing device users in finding wireless devices that may be compatible with their hearing devices. Not all wireless devices have been rated. Wireless devices that are rated will have the rating displayed on the box together with other relevant approval markings. The ratings are not guarantees. Results will vary depending on the users hearing device and hearing loss. If your hearing device is vulnerable to interference, you may not be able to use a rated wireless device successfully. Consulting with your hearing health professional and testing the wireless device with your hearing device is the best way to evaluate it for your personal needs. This smartphone has been tested and rated for use with hearing aids for some of the wireless technologies that the smartphone uses. However, other wireless technologies may be used in this smartphone that have not been tested for use with hearing aids. It is important to try the different features of your smartphone thoroughly and in different locations to determine if you hear any interfering noise when using this smartphone with your hearing aid or cochlear implant. Consult your wireless service provider about its return and exchange policies, and for information about hearing aid compatibility. Hearing aid compatibility rating for this smartphone: M3/T3 This may vary depending on country.

(1) 9 How the ratings work M-Ratings: Wireless devices rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than wireless devices that are not labeled. M4 is the better or higher of the two ratings. T-Ratings: Wireless devices rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing devices telecoil (T Switch or Telephone Switch) than unrated wireless devices. T4 is the better or higher of the two ratings. (Note that not all hearing devices have telecoils in them.) Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from wireless devices. For more information about the actions that the FCC has taken with regard to hearing aid compatibility with wireless devices and other steps that the FCC has taken to ensure that individuals with disabilities have access to telecommunications services, visit www.fcc.gov/cgb/dro. SAR Information 1.00 W/kg @ 1g (HEAD) 0.80 W/kg @ 1g (BODY) THIS MODEL DEVICE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the TCL Mobile Limited. Accessories supplied or designated for this product. Use of other accessories may not ensure compliance with the FCC RF exposure guidelines. Your wireless mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies:

American National Standards Institute (ANSI) IEEE. C95.1-1992 . National Council on Radiation Protection and Measurement (NCRP). Report 86. 1986. International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996. Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phone employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg*. 10 The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of https://fjallfoss. fcc.gov/oetcf/eas/reports/GenericSearch.cfm after searching on FCC ID: 2ACCJH137. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications &

Internet Association (CTIA) Web-site as http://http://www.ctia.org/.

* In the U.S. and Canada, the SAR limit for mobile phone used by the public is 1.6 Watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in usage. Normal condition only to ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 15 mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. FCC RF Radiation Exposure Statement This transmitter has been demonstrated co-location compliance requirements with Bluetooth and WLAN. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. 11 Telecommunications & Internet Association (TIA) safety information Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of 15 cm

(6 inches) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers:

Should ALWAYS keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is turned ON. Should not carry the phone in a breast pocket. Should use the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn the phone OFF immediately. Hearing aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider, or call the customer service line to discuss alternatives. RoHS compliance This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 7 January 2003, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments. Electronic Recycling (Within USA Only):

For more information on Electronic Recycling, please:

1. Visit the Alcatel Electronic Recycling Program website at us.alcatelmobile.com/accessibility-

compliance/electronic-recycling-program/. Battery Recycling (USA & Canada):

Alcatel partners with Call2Recycle to offer a safe and convenient battery recycling program. For more information on our Battery Recycling Program, please visit USA and Canada website at us.alcatelmobile.com/accessibility-compliance/battery-recycling/ and ca.alcatelmobile.com/

accessibility-compliance/battery-recycling/. 12

Quick Start Guide Thank you for choosing TCL. This booklet helps you get started with your new device. For more information about your phone or to download the complete user manual version, please visit tcl.com/us Phone Setup Power on your phone Hold down the Power key until the phone powers on, unlock your phone (screen lock, fingerprint, face unlock) if necessary and confirm. The Home screen is displayed. Phone T601DL Installing or removing the SIM card and microSDTM card If you do not know your PIN/password or pattern, or if you have forgotten it, contact your service provider. Do not leave your PIN/password or pattern, with your phone. Store this information in a safe place when not in use. Placing a call Your phone already has a SIM card installed. If you need to change or remove your SIM card, follow the steps below. Set up your phone for the first time Touch Phone from the Home screen. Use the provided SIM pin to open the SIM tray. To install SIM/microSDTM card, place the SIM/microSDTM card with the chip facing down into the SIM card tray and then slide it into its slot. To remove SIM/microSDTM card, push up on the chip side of the cards inside the SIM tray. The first time you power on the phone, you'll be able to select your language, select a network, log in to your Google Account and Google Services, and select a screen lock option. Power off your phone Hold down the Power key from any screen until the phone options appear, select Power off. Personalize your Home screen Touch and hold the item to be repositioned to activate the Move mode, drag the item to the desired position and then release. You can move items both on the Home screen and the favorite tray. Hold the icon on the left or right edge of the screen to drag the item to another Home screen. Charging the battery Add Reposition Remove Create folders You can touch and hold a folder, an application or a widget to activate the Move mode and drag the item to any Home screen as you prefer. Show the dial pad Touch and hold the item to be removed to activate the Move mode, drag the item up to the top of the Remove icon, and release after the item turns grey. To improve the organization of items (shortcuts or applications) on the Home screen and the favorite tray, you can add them to a folder by stacking one item on top of another. To rename a folder, open it and touch the folders title bar to input the new name. Touch to place the call. To hang up a call, touch

. Wallpaper customization Touch and hold the Home screen then touch Wallpapers to customize wallpaper. Enter the desired number from the keyboard directly, or select one of the following:

Access frequently called or favorite contacts in Favorites

. View recently called numbers and contacts in Recents

. Choose a saved contact in Contacts

. Answering or rejecting a call When you receive a call:

Swipe up to answer. Swipe down to reject. Swipe to reject the call by sending a preset message. To mute the ringtone volume of an incoming call, press the Volume up/down key. It is advised that you fully charge your battery before first use (

). Connect the charger to your phone and an outlet. Charging status is indicated by the percentage on screen while the phone is powered off. The percentage increases as the phone is charged. English - CJB2H30KFAAA Printed in China Messages You can create, edit, and receive SMS and MMS with this phone. To access this feature, touch Messages from the Home screen. Gmail Security Getting connected In addition to your Gmail account, your phone supports external POP3, IMAP or Exchange email accounts. Swipe up on the Home screen, then touch Settings

> Security & biometrics. Your phone can connect to the Internet using 5G networks or Wi-Fi, whichever is convenient and available. From the status bar, you can view both phone status and notification information. Touch to give access to your location, send a voice message or attach files. Touch to take a photo/video or attach a photo/video. Touch to switch to "abc/Abc" mode;

Touch and hold to switch to "ABC" mode. Sending a message Touch to enter voice input. Enter the mobile phone number of the recipient in the To bar or select a contact, then touch the Text message bar to type the text of the message. When finished, touch to send the text message. An SMS of more than 160 characters will be split and sent as multiple SMS. A counter will be displayed on the right of the text box to remind you of how many characters can be entered in one message. Specific letters (accent) will also increase the size of the SMS, this may cause multiple SMS to be sent to your recipient. Sending a multimedia message MMS enables you to send video clips, images, photos, animations, slides and sounds to other compatible phones and e-mail addresses. An SMS will be converted to MMS automatically when media files (image, video, audio, slides, etc.) are attached or subject or email addresses are added. To access this feature, swipe up on Home screen then select Gmail. To create and send emails Touch from the Inbox screen. Enter recipient(s) email address(es) in the To: field. If necessary, tap next to the To: field to add Cc/Bcc to the message. Enter the subject and the content of the message. Tap to add an attachment. Tap to send. Camera & Video Your phone's camera is equipped with multiple modes for taking photos and videos. From the home screen, touch to access. The screen acts as the viewfinder. First, position the object or landscape in the viewfinder, touch the screen to focus if necessary. Touch saved. You can also touch and hold to take burst shots, the maximum number is 20. to capture, the photo will be automatically To take a picture:

To take a video:

Touch VIDEO to change the camera mode to video. Touch Touch the left part of this icon to take a picture during video recording. to start video recording. Touch the right part of this icon continue. Touch to stop recording. The video will be automatically saved. to pause video recording and touch to Enable your lock/unlock method: Swipe, Pattern, PIN, Password, Fingerprint, or Face Unlock. Face Unlock will unlock your phone using the front camera to register your face. Note: facial recognition methods may not be as secure as Pattern, Pin, or Password locks. Data backup This phone enables you to back up your phones settings and other application data to the Google Server, with your Google Account. If you replace your phone, the settings and data youve backed up are restored onto the new phone the first time you sign in with your Google Account. Network Wi-Fi To activate this function:

Swipe up on Home screen > Settings > System > Backup. Factory data reset To activate factory data reset:

Tap RESET PHONE. Swipe up on Home screen > Settings > System > Reset > Factory data reset. Resetting the phone will erase all of your personal data from internal phone storage, including information about your Google Account, any other accounts on your phone, your system and application settings, and any downloaded applications. If you reset the phone in this way, youre prompted to re-enter the same kind of information as when you first set up your device. If you are unable to power on your phone, there is another method to perform a factory data reset by pressing the Power key and the Volume up key at the same time until the screen lights up. The first time you turn on your phone, it will automatically configure your 5G network service. To check the network connection you are using, swipe up on the Home screen > Settings network > Mobile network.

> SIM cards & mobile Using Wi-Fi, you can connect to the Internet when your phone is within the range of a wireless network. Wi-Fi can be used on your phone even without a SIM card inserted. To turn Wi-Fi on and connect to a wireless network Swipe up on the Home screen, then touch Settings

> Wi-Fi. Touch the switch next to Wi-Fi to turn Wi-Fi on or off. Touch Wi-Fi, the detailed information of detected Wi-Fi networks is displayed in the Wi-Fi networks section. Touch a Wi-Fi network to connect. If the network you selected is secured, you are required to enter a password or other credentials (you may contact the network carrier for details). When finished, touch CONNECT. Connecting to Bluetooth devices Bluetooth is a short-range wireless communication technology that you can use to exchange data or connect to other Bluetooth devices for various uses. Notification icons To turn on Bluetooth Swipe up on the Home screen, then touch Settings

> Bluetooth. Touch to activate/deactivate this function. To pair/connect your phone with a Bluetooth device Touch Settings > Bluetooth > + Pair new device. Touch a Bluetooth device you want to pair your phone with from the list. In the dialog that pops up, touch PAIR to confirm. If the pairing is successful, your phone will be connected to the device. To disconnect/unpair from a Bluetooth device Touch next to the device name Touch and FORGET DEVICE to confirm New Gmail message Missed call New text or multimedia message Connect to open Wi-Fi network Upcoming event Downloading data Uploading data System update available Regulatory Agency Information 2ACCJH137 FCC ID Max. SAR (W/kg) - Head Max. SAR (W/kg) - Body HAC (Hearing Aid Compatible) & Rating Contacts Adding a contact Contacts enables quick and easy access to the people you want to reach. You can view and create contacts on your phone. To access this feature, swipe up on the Home screen, then select Contacts

. Touch to view contact details Touch and hold to share or delete the selected contact Touch to add a new contact Editing a contact To edit contact information, touch in the contact details screen. When finished, touch SAVE. Importing, exporting, and sharing contacts From the Contacts screen, touch export contacts from/to your SIM card, phone, micro SD card, etc. to open the options menu, touch Settings > Import/Export, then select to import/

Share a single contact or multiple contacts with others by sending the contact's vCard to them via Bluetooth, Gmail, etc. Touch and hold the contact (s) you want to share, touch

. Status bar Status icons GSM WCDMA LTE 5G Signal strength No signal Airplane mode Bluetooth connected Headset connected GPS is on Vibrate mode Alarm is set Connected to a Wi-Fi network Speakerphone is on No SIM card inserted Battery is charging Battery is low Battery is partially drained Battery is full

Product safety and warranty information English - CQF2HW0LCAAA Printed in China Safety and Precautions Safety and use www.sar-tick.com This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found in the Radio waves section. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 15 mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call. PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your phone near your ear while the loudspeaker is in use. This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer. We recommend that you read this chapter carefully before using your phone. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. TRAFFIC SAFETY:

Given that studies show that using a phone while driving a vehicle constitutes a real risk, even when the hands-free kit is used (car kit, headset...), drivers are requested to refrain from using their phone when the vehicle is not parked. Check the laws and regulations on the use of wireless phones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. CONDITIONS OF USE:

performance;

aircrafts;

You are advised to switch off the phone from time to time to optimize its Remember to abide by local authority rules of mobile phone use on Your phone is a unibody device, where the back cover and battery are not removable, disassembling the phone will void your warranty. Disassembling the phone can cause bodily injury if the battery is punctured;

Always handle your phone with care and keep it in a clean and dust-free place;

Do not allow your phone to be exposed to adverse weather or environmental conditions, such as moisture, humidity, rain, infiltration of liquids, dust, sea air, etc. The manufacturers recommended operating temperature range is -10C (14F) to +55C (131F). At over 55C (131F), the legibility of the phones display may be temporarily impaired;

Do not open, dismantle, or attempt to repair your phone yourself;

Do not drop, throw, or bend your phone;

Use only batteries, battery chargers, and accessories which are recommended by TCL Communication Ltd. and its affiliates and are compatible with your phone model. TCL Communication Ltd. and its affiliates disclaim any liability for damage caused by the use of other chargers or batteries;

Your phone should not be disposed of in a municipal waste. Please check local regulations for disposal of electronic products;

Remember to make backup copies or keep a written record of all important information stored on your phone;

1 2 Some people may suffer epileptic seizures or blackouts when exposed to flashing lights, or when playing video games. These seizures or blackouts may occur even if a person never had a previous seizure or blackout. If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult your doctor before playing video games on your phone or enabling a flashing-lights feature on your phone;

Parents should monitor their childrens use of video games or other features that incorporate flashing lights on the phones. All persons should discontinue use and consult a doctor if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, orientation, or movements. PRIVACY:

Please note that you must respect the laws and regulations in force in your jurisdiction or other jurisdiction(s) where you will use your phone regarding taking photographs and recording sounds with your phone. Pursuant to such laws and regulations, it may be strictly forbidden to take photographs and/or to record the voices of other people or any of their personal attributes, and reproduce or distribute them, as this may be considered to be an invasion of privacy. It is the users sole responsibility to ensure that prior authorization has been obtained, if necessary, in order to record private or confidential conversations or take a photograph of another person; the manufacturer, the seller or vendor of your phone (including the carrier) disclaim any liability which may result from improper use of the phone. BATTERY:

For a unibody device:

Observe the following precautions:

Do not attempt to open the back cover;

They will then be recycled, preventing substances being disposed of in the environment, so that their components can be reused. In European Union countries:

These collection points are accessible free of charge. All products with this sign must be brought to these collection points. In non-European Union jurisdictions:

Items of equipment with this symbol are not to be thrown into ordinary bins if your jurisdiction or your region has suitable recycling and collection facilities; instead they are to be taken to collection points for them to be recycled. Battery Recycling TCL partners with Call2Recycle to offer a safe and convenient battery recycling program. For more information on our Battery Recycling Program, please visit the USA and Canada at https://www.tclusa.com/mobile/accessibility-

compliance/tcl-mobile-battery-recycling-program.html. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. CHARGERS:

Home A.C./ Travel chargers will operate within the temperature range of:

0C (32F) to 40C (104F). The chargers designed for your phone meet the standard for safety of information technology equipment and office equipment use. Due to different applicable electrical specifications, a charger you purchased in one jurisdiction may not work in another jurisdiction. They should be used for this purpose only. Do not attempt to eject, replace, or open the battery;

Characteristics of power supply (depending on the country):

Do not puncture the back cover of your phone;

Travel charger: 9V2A QC13US Do not burn or dispose of your phone in household rubbish or store it at Input 100-240V 50/60Hz,0.5A temperature above 60C (140F);

Phone and battery as a unibody device must be disposed of in accordance with locally applicable environmental regulations. Output: 5.0V/9V/12V,3.0A/2.0A/1.5A Battery: Softpack 4500mAh typ This symbol on your phone, the battery, and the accessories means that these products must be taken to collection points at the end of their life:

Municipal waste disposal centers with specific bins for these types of equipment;

Collection bins at points of sale. 3 4 Radio waves THIS PHONE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio-

frequency (RF) energy. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. These guidelines include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health. The exposure standard for phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by public authorities such as the Federal Communications Commission of the US Government (FCC), or by Innovation, Science and Economic Development Canada (ISEDC), is 1.6 W/kg averaged over 1 gram of body tissue. Tests for SAR are conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc. gov/oet/ea/fccid after searching on FCC ID : 2ACCJH137 Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output of the phone. Before a phone model is available for sale to the public, compliance with national regulations and standards must be shown. The highest SAR value for this model phone when tested is 1.00 W/Kg for use at the ear and 0.80 W/Kg for use close to the body. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for RF exposure. For body-worn operation, the phone meets FCC RF exposure guidelines provided that it is used with a non-metallic accessory with the handset at least 15 mm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Additional information on SAR can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site: http://www. ctia.org/

The World Health Organization (WHO) considers that present scientific information does not indicate the need for any special precautions for use of phones. If individuals are concerned, they may choose to limit their own or their childrens RF exposure by limiting the length of calls, or using hands-free devices to keep phones away from the head and body. Additional WHO information about electromagnetic fields and public health are available on the following website: http://www.who.int/peh-emf. Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. For the receiver devices associated with the operation of a licensed radio service (e.g. FM broadcast), they bear the following statement:

This phone complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference;

This device must accept any interference received, including interference that may cause undesired operation. Your phone is equipped with a built-in antenna. For optimal operation, you should avoid touching it or degrading it. 5 6 As mobile devices offer a range of functions, they can be used in positions other than against your ear. In such circumstances the device will be compliant with the guidelines when used with a headset or usb data cable. If you are using another accessory ensure that whatever product is used is free of any metal and that it positions the phone at least 15 mm away from the body. Please note by using the device some of your personal data may be shared with the main device. It is under your own responsibility to protect your own personal data, not to share with it with any unauthorized devices or third party devices connected to yours. For products with Wi-Fi features, only connect to trusted Wi-Fi networks. Also when using your product as a hotspot (where available), use network security. These precautions will help prevent unauthorized access to your device. Your product can store personal information in various locations including a SIM card, memory card, and built-in memory. Be sure to remove or clear all personal information before you recycle, return, or give away your product. Choose your apps and updates carefully, and install from trusted sources only. Some apps can impact your products performance and/or have access to private information including account details, call data, location details and network resources. Note that any data shared with TCL Communication Ltd. is stored in accordance with applicable data protection legislation. For these purposes TCL Communication Ltd. implements and maintains appropriate technical and organizational measures to protect all personal data, for example against unauthorized or unlawful processing and accidental loss or destruction of or damage to such personal data whereby the measures shall provide a level of security that is appropriate having regard to The technical possibilities available;

The costs for implementing the measures;

The risks involved with the processing of the personal data, and;

The sensitivity of the personal data processed. You can access, review, and edit your personal information at any time by logging into your user account, visiting your user profile or by contacting us directly. Should you require us to edit or delete your personal data, we may ask you to provide us with evidence of your identity before we can act on your request. Licenses microSD Logo is a trademark. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TCL Communication Technology Holdings Limited. and its affiliates is under licence. Other trademarks and trade names are those of their respective owners. TCL T768S Bluetooth Declaration ID D054212 The Wi-Fi Logo is a certification mark of the Wi-Fi Alliance. Google, the Google logo, Android, the Android logo, Google Search TM, Google Maps TM, Gmail TM, YouTube, Google Play Store, Google Latitude TM, and Hangouts TM are trademarks of Google Inc. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License (the text will show when you touch Google legal in Settings > About phone > Legal information) (1). You have purchased a product which uses the open source (http://

opensource.org/) programs mtd, msdosfs, netfilter/iptables and initrd in object code and other open source programs licensed under the GNU General Public Licence and Apache Licence. You may download the source codes from https://sourceforge.net/

projects/tcl-mobile/files/. The provision of the source code is free of charge from the internet. US Information Concerning the Federal Communications Commission

(FCC) Requirements for Hearing Aid Compatibility with Wireless Devices When wireless devices are used near hearing devices (such as hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference, and wireless devices also vary in the amount of interference that they generate. The wireless telephone industry has developed ratings to assist hearing device users in finding wireless devices that may be compatible with their hearing devices. Not all wireless devices have been rated. Wireless devices that are rated will have the rating displayed on the box together with other relevant approval markings. 7

(1) May not be available in all countries. 8 General information Internet address: tclusa.com Manufacturer: TCL Communication Ltd. Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Electronic labeling path: Touch Settings > About phone > Regulatory &

safety or press *#07# to find more information about labeling (1), such as FCC ID. Your phone is a transceiver that operates on GSM (850/900/1800/1900 MHz) and UMTS (B2/4/5), LTE Bands (B2/4/5/13/66), 5G (n2/n5/n48/

n66/n77). Protection against theft (2) Your phone is identified by an IMEI (phone serial number) shown on the packaging label and in the phones memory. We recommend that you note the number the first time you use your phone by entering *#06# and keep it in a safe place. It may be requested by the police or your carrier if your phone is stolen. This number allows your phone to be blocked preventing a third person from using it, even with a different SIM card. Disclaimer There may be certain differences between the user manual description and the phones operation, depending on the software release of your phone or specific carrier services. TCL Communication Technology Holding Limited. shall not be held legally responsible for such differences, if any, nor for their potential consequences, which responsibility shall be borne by the carrier exclusively. The ratings are not guarantees. Results will vary depending on the users hearing device and hearing loss. If your hearing device is vulnerable to interference, you may not be able to use a rated wireless device successfully. Consulting with your hearing health professional and testing the wireless device with your hearing device is the best way to evaluate it for your personal needs. This smartphone has been tested and rated for use with hearing aids for some of the wireless technologies that the smartphone uses. However, other wireless technologies may be used in this smartphone that have not been tested for use with hearing aids. It is important to try the different features of your smartphone thoroughly and in different locations to determine if you hear any interfering noise when using this smartphone with your hearing aid or cochlear implant. Consult your wireless service provider about its return and exchange policies, and for information about hearing aid compatibility. Hearing aid compatibility rating for this smartphone: M3/T3. Reference ANSI C63.19 (2011). How the ratings work M-Ratings: Wireless devices rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than wireless devices that are not labeled. M4 is the better or higher of the two ratings. T-Ratings: Wireless devices rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing devices telecoil (T Switch or Telephone Switch) than unrated wireless devices. T4 is the better or higher of the two ratings. (Note that not all hearing devices have telecoils in them.) Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from wireless devices. For more information about the actions that the FCC has taken with regard to hearing aid compatibility with wireless devices and other steps that the FCC has taken to ensure that individuals with disabilities have access to telecommunications services, visit www.fcc.gov/cgb/dro. FCC ID: 2ACCJH137. a) 20.19(f)(1): an explanation of the ANSI C63.19 rating system. b) 20.19(f)(2)(i) specified disclosure for handsets certified under ANSI C63.19 and not tested for T-Coil operations in accordance with the guidance issued by OET in KDB Publication 285076 D02 will require disclosure that the handset does not meet the relevant rating(s) with respect to such operation(s). 9

(1) This may vary depending on country.

(2) Contact your service provider to check service availability. 10 1 YEAR LIMITED WARRANTY For information on warranty of your device, visit the USA and Canada websites at https://www.tclusa.com/mobile/warranty. WARNING: Cancer and Reproduction Harm-www.P65Warmings.ca.gov. Electronic Information For more information on Electronic Recycling:

1) Visit TCL Electronic Recycling Program website at https://www.tclusa. com/mobile/accessibility-compliance/tcl-mobile-electronic-recycling-

program.html or 2) Call TCL US Customer Support at 1-855-224-4228. TCL Communication Technology Holdings Limited. reserves the right to alter material or technical specification without prior notice. TCL is a registered trademark of TCL Technology Group Corporation 2021 TCL Technology Group Corporation. 11

FCC E-label information:

Model T601DL Electronic labeling Path: Touch Settings System Regulatory & Safety, you can find more information about labeling, such as FCC ID. Yes the instructions are showed on User manual. FCC E-label information:

Model T768S Electronic labeling Path: Touch Settings System Regulatory & Safety, you can find more information about labeling, such as FCC ID. Yes the instructions are showed on User manual.

2021-05-28 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: SHORT-TERM Confidentiality request for FCC ID: 2ACCJH137 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days:

- External Photos

- Internal Photos

- Test Setup Photos

- User manual The applicant also acknowledges that they will also provide appropriate notice to ACB should either of the following occur:

a) if the applicant requires additional 45 days extension periods they will notify ACB with a new request letter at least 7 days prior to the short-term confidentiality expiration date [Note: up to a maximum of 3 extensions only are allowed], or b) Immediately notify ACB in the event the information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Yours Sincerely, Zhizhou GONG Product Certification Manager TCL Communication Ltd. TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong TEL: 0086-755-36611722 http://tclcom.tcl.com

5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong TEL: 0086-755-36611722 2021-06-03 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: 2ACCJH137 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application:

- Block Diagram

- Schematics

- Operational Description

- BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, Zhizhou GONG Product Certification Manager TCL Communication Ltd.

Date 2021-05-28 To: Federal Communications Commission, Authorization & Evaluation Division, 7345 Oakland Mills Road Columbia, MD 21046 And American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

CTTL (Telecommunication Technology Labs,Academy of Telecommunication Research,MIIT) is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Regards, Zhizhou GONG Product Certification Manager TCL Communication Ltd. TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Tel: 0086-755-36611722 http://tclcom.tcl.com

7/F, Block F4, TCL Communication Technology Building, TCL International E City, Zhong Shan Yuan Road, Nanshan District, Shenzhen, Guangdong, P.R. China 518052 TEL: 0086-755-36611722 Declaration of changes from T601DL to T768S Ante nna Base Band Transceiv er ASM Power Amplifier Duplex er SOFTWARE MODIFICATIONS:

Protocol Stack changes: No MMS/STK/USAT/USIM changes: No DM/SUPL/VT/FUMO/SWP/HCI: No Other changes detailed: No HARDWARE MODIFICATIONS:

Band changes: No PCB Layout changes: No Main components changes:

NO GSM850 NO GSM900 NO GSM1800 NO GSM1900 NO UMTS1900 NO UMTS1700 NO UMTS850 NO LTE 2 NO LTE 4 NO LTE 5 NO LTE 12 NO LTE 13 NO LTE 25 NO LTE 26 NO LTE 41 NO LTE 66 NO LTE 71 NO 5G n2 NO 5G n5 5G n25(disable) NO 5G n41(disable) NO NO 5G n66 5G n71(disable) NO NO 5G n77 NO GPS NO Bluetooth NO WiFi NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO FM changes: No Other components changes:

LCD/ Speaker/ Camera/ Vibrator changes: No Tx SAW Filter NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO Rx SAW Filter NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO Other changes detailed:

MECHANICAL MODIFICATIONS:

Use new metal front/back cover or keypad: No Mechanical shell changes:

Whole size of EUT: No Distance of Ear reference point to bottom of handset: No Other trinkets to change the surface of handset: No Other changes detailed: The TCL logo position is changed. And remove the logo of TracFone. APPROVED BY:

Zhizhou GONG Product Certification Manager TCL Communication Ltd.

5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong TEL: 0086-755-36611722 2021-05-20 Subject: 5G Sub-6GHz HAC Attestation FCC ID: 2ACCJH137 To Whom It May Concern, We attest the handset as designed is expected to exhibit similar audio intensity levels between a voice call placed over a VoLTE connection and over a 5G Sub-6GHz connection. The combination of ABM1 values from a VoLTE connection and ABM2 values from the 5G Sub-6GHz connection, while maintaining a S+N/N margin of 3 dB or greater from the rating threshold, is expected to represent the HAC performance when operating in 5G Sub-6GHz bands. Yours Sincerely, Zhizhou GONG Product Certification Manager TCL Communication Ltd.

5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong TEL: 0086-755-36611722 DFS Client Declaration Letter Date: 2021/6/8 We have declared below featured for device, FCC ID: 2ACCJH137

(1) DFS Device Master Client with Radar detection capability Client without radar detection capability

(2) Active / Passive Scanning, ad hoc mode access point capability Frequency Band (MHz) Scanning Plan Ad Hoc Mode Capability Access point Capability WiFi Direct Group Owner WiFi Direct Group Client 2412 - 2462 Active 5180 5240 Active 5260 5320 Passive 5500 5580 Passive 5660 5700 Passive Yes Yes No No No Yes Yes No No No Yes Yes No No No Yes Yes Yes Yes Yes Yes Yes 5745 - 5825 Active

(3) Country code selection capability to end user-

If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection) Yes, No Yes Yes

(4) Transmission in 5600 MHz to 5650 MHz is notched -

Yes, No Yes, No

(5) Meet Part 15.202 requirement -

A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices. A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(6) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. V1.0 Apply, Not Apply, (If apply, please help to provide explanation on it was implement, and how 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong TEL: 0086-755-36611722 software was controlled). Signature Zhizhou GONG Product Certification Manager TCL Communication Ltd. V1.0