FCC ID: 2ACCJH143 GSM/UMTS/LTE mobile phone

Quick Start Guide Thank you for choosing TCL. This booklet helps you get started with your new device. For more information about your phone or to download the complete user manual version, please visit tcl.com/us Phone Setup Power on your phone Hold down the Power key until the phone powers on, unlock your phone (screen lock, face unlock) if necessary and confirm. The Home screen is displayed. Phone T603DL Installing or removing the SIM card and microSDTM card If you do not know your PIN/password or pattern, or if you have forgotten it, contact your service provider. Do not leave your PIN/password or pattern, with your phone. Store this information in a safe place when not in use. Placing a call Your phone already has a SIM card installed. If you need to change or remove your SIM card, follow the steps below. Set up your phone for the first time Touch Phone from the Home screen. Use the provided SIM pin to open the SIM tray. To install SIM/microSDTM card, place the SIM/microSDTM card with the chip facing down into the SIM card tray and then slide it into its slot. To remove SIM/microSDTM card, push up on the chip side of the cards inside the SIM tray. The first time you power on the phone, you'll be able to select your language, select a network, log in to your Google Account and Google Services, and select a screen lock option. Power off your phone Hold down the Power key from any screen until the phone options appear, select Power off. Personalize your Home screen Touch and hold the item to be repositioned to activate the Move mode, drag the item to the desired position and then release. You can move items both on the Home screen and the favorite tray. Hold the icon on the left or right edge of the screen to drag the item to another Home screen. Charging the battery Add Reposition Remove Create folders You can touch and hold a folder, an application or a widget to activate the Move mode and drag the item to any Home screen as you prefer. Show the dial pad Touch and hold the item to be removed to activate the Move mode, drag the item up to the top of the Remove icon, and release after the item turns grey. To improve the organization of items (shortcuts or applications) on the Home screen and the favorite tray, you can add them to a folder by stacking one item on top of another. To rename a folder, open it and touch the folders title bar to input the new name. Touch to place the call. To hang up a call, touch

. Wallpaper customization Touch and hold the Home screen then touch Wallpapers to customize wallpaper. Enter the desired number from the keyboard directly, or select one of the following:

Access frequently called or favorite contacts in Favorites

. View recently called numbers and contacts in Recents

. Choose a saved contact in Contacts

. Answering or rejecting a call When you receive a call:

Swipe up to answer. Swipe down to reject. Swipe to reject the call by sending a preset message. To mute the ringtone volume of an incoming call, press the Volume up/down key. It is advised that you fully charge your battery before first use (

). Connect the charger to your phone and an outlet. Charging status is indicated by the percentage on screen while the phone is powered off. The percentage increases as the phone is charged. English - CJB2J00LCAAA Printed in China Contacts Adding a contact Contacts enables quick and easy access to the people you want to reach. You can view and create contacts on your phone. To access this feature, swipe up on the Home screen, then select Contacts

. Touch to view contact details Touch and hold to share or delete the selected contact Touch to add a new contact Editing a contact To edit contact information, touch in the contact details screen. When finished, touch SAVE. Importing, exporting, and sharing contacts From the Contacts screen, touch export contacts from/to your SIM card, phone, micro SD card, etc. to open the options menu, touch Settings > Import/Export, then select to import/

Share a single contact or multiple contacts with others by sending the contact's vCard to them via Bluetooth, Gmail, etc. Touch and hold the contact (s) you want to share, touch

. Messages You can create, edit, and receive SMS and MMS with this phone. To access this feature, touch Messages from the Home screen. Gmail In addition to your Gmail account, your phone supports external POP3, IMAP or Exchange email accounts. To access this feature, swipe up on Home screen then select Gmail. Touch to give access to your location, send a voice message or attach files. Touch to take a photo/video or attach a photo/video. Touch to switch to "abc/Abc" mode;

Touch and hold to switch to "ABC" mode. Sending a message Touch to enter voice input. Enter the mobile phone number of the recipient in the To bar or select a contact, then touch the Text message bar to type the text of the message. When finished, touch to send the text message. An SMS of more than 160 characters will be split and sent as multiple SMS. A counter will be displayed on the right of the text box to remind you of how many characters can be entered in one message. Specific letters (accent) will also increase the size of the SMS, this may cause multiple SMS to be sent to your recipient. Sending a multimedia message MMS enables you to send video clips, images, photos, animations, slides and sounds to other compatible phones and e-mail addresses. An SMS will be converted to MMS automatically when media files (image, video, audio, slides, etc.) are attached or subject or email addresses are added. To create and send emails Touch from the Inbox screen. Enter recipient(s) email address(es) in the To: field. If necessary, tap next to the To: field to add Cc/Bcc to the message. Enter the subject and the content of the message. Tap to add an attachment. Tap to send. Camera & Video Your phone's camera is equipped with multiple modes for taking photos and videos. From the home screen, touch to access. The screen acts as the viewfinder. First, position the object or landscape in the viewfinder, touch the screen to focus if necessary. Touch saved. You can also touch and hold to capture, the photo will be automatically to take burst shots. To take a picture:

To take a video:

Touch VIDEO to change the camera mode to video. Touch Touch the left part of this icon to take a picture during video recording. to start video recording. Touch the right part of this icon continue. Touch to stop recording. The video will be automatically saved. to pause video recording and touch to Security Swipe up on the Home screen, then touch Settings

> Security & biometrics. Enable your lock/unlock method: Swipe, Pattern, PIN, Password, or Face Unlock. Face Unlock will unlock your phone using the front camera to register your face. Note: facial recognition methods may not be as secure as Pattern, Pin, or Password locks. Data backup This phone enables you to back up your phones settings and other application data to the Google Server, with your Google Account. If you replace your phone, the settings and data youve backed up are restored onto the new phone the first time you sign in with your Google Account. To activate this function:

Swipe up on Home screen > Settings > System > Backup. Factory data reset To activate factory data reset:

Tap Erase all data. Swipe up on Home screen > Settings > System > Reset > Erase all data (factory reset). Resetting the phone will erase all of your personal data from internal phone storage, including information about your Google Account, any other accounts on your phone, your system and application settings, and any downloaded applications. If you reset the phone in this way, youre prompted to re-enter the same kind of information as when you first set up your device. If you are unable to power on your phone, there is another method to perform a factory data reset by pressing the Power key and the Volume up key at the same time until the screen lights up. Your phone can connect to the Internet using 4G networks or Wi-Fi, whichever is convenient and available. From the status bar, you can view both phone status and notification information. Getting connected Network Wi-Fi The first time you turn on your phone, it will automatically configure your 4G network service. To check the network connection you are using, swipe up on the Home screen > Settings

> Mobile network. Using Wi-Fi, you can connect to the Internet when your phone is within the range of a wireless network. Wi-Fi can be used on your phone even without a SIM card inserted. To turn Wi-Fi on and connect to a wireless network Swipe up on the Home screen, then touch Settings

> Wi-Fi. Touch the switch next to Wi-Fi to turn Wi-Fi on or off. Status bar Status icons GSM WCDMA LTE Signal strength No signal Airplane mode Vibrate mode Alarm is set Connected to a Wi-Fi network Speakerphone is on No SIM card inserted Battery is charging Touch Wi-Fi, the detailed information of detected Wi-Fi networks is displayed in the Wi-Fi networks section. Bluetooth connected Battery is low Touch a Wi-Fi network to connect. If the network you selected is secured, you are required to enter a password or Headset connected Battery is partially drained other credentials (you may contact the network carrier for details). When finished, touch CONNECT. GPS is on Battery is full Connecting to Bluetooth devices Bluetooth is a short-range wireless communication technology that you can use to exchange data or connect to other Bluetooth devices for various uses. To turn on Bluetooth Notification icons New Gmail message Missed call Swipe up on the Home screen, then touch Settings

> Bluetooth. New text or multimedia message Connect to open Wi-Fi network Touch to activate/deactivate this function. To pair/connect your phone with a Bluetooth device Touch Settings > Bluetooth > + Pair new device. Touch a Bluetooth device you want to pair your phone with from the list. In the dialog that pops up, touch PAIR to confirm. If the pairing is successful, your phone will be connected to the device. To disconnect/unpair from a Bluetooth device Touch next to the device name Touch and FORGET DEVICE to confirm Upcoming event Downloading data Uploading data System update available Regulatory Agency Information FCC ID Max. SAR (W/kg) - Head Max. SAR (W/kg) - Body 2ACCJH143 0.52 W/Kg 1.13 W/Kg HAC (Hearing Aid Compatible) & Rating M4/T4

Safety and Precautions SAR This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found in the Radio waves section. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 15 mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call. PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your phone near your ear while the loudspeaker is in use. 1 Safety and use We recommend that you read this chapter carefully before using your phone. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. TRAFFIC SAFETY:

Given that studies show that using a phone while driving a vehicle constitutes a real risk, even when the hands-free kit is used (car kit, headset, etc.), drivers are requested to refrain from using their phone when the vehicle is not parked. Check the laws and regulations on the use of wireless phones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. CONDITIONS OF USE:

You are advised to switch off the phone from time to time to Remember to abide by local authority rules of mobile phone optimize its performance. use on aircrafts. If your phone is a unibody device, where the back cover and battery are not removable, disassembling the phone will void your warranty. Disassembling the phone can cause bodily injury if the battery is punctured. Always handle your phone with care and keep it in a clean and dust-free place. Do not allow your phone to be exposed to adverse weather or environmental conditions, such as moisture, humidity, rain, infiltration of liquids, dust, sea air, etc. The manufacturers recommended operating temperature range is -10C (14F) to +45C (113F). At over 45C (113F), the legibility of the phones display may be temporarily impaired. Do not open, dismantle, or attempt to repair your phone yourself. Do not drop, throw, or bend your phone. Use only batteries, battery chargers, and accessories which are recommended by TCL Communication Ltd. and its affiliates and which are compatible with your phone model. TCL Communication Ltd. and its affiliates disclaim any liability for damage caused by the use of other chargers or batteries. Your phone should not be disposed of in a municipal waste. Please check local regulations for disposal of electronic products. Remember to make backup copies or keep a written record of all important information stored on your phone. Some people may suffer epileptic seizures or blackouts when exposed to flashing lights, or when playing video games. These seizures or blackouts may occur even if a person has never experienced them before. If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult your doctor before playing video games on your phone or enabling a flashing-lights feature on your phone. 2 Parents should monitor their childrens use of video games or other features that incorporate flashing lights on the phones. All persons should discontinue use and consult a doctor if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, orientation, or movements. PRIVACY:

Please note that you must respect the laws and regulations in force in your jurisdiction or other jurisdiction(s) where you will use your phone regarding taking photographs and recording sounds with your phone. Pursuant to such laws and regulations, it may be strictly forbidden to take photographs and/or to record the voices of other people or any of their personal attributes, and reproduce or distribute them, as this may be considered to be an invasion of privacy. It is the user's sole responsibility to ensure that prior authorization has been obtained, if necessary, in order to record private or confidential conversations or take a photograph of another person; the manufacturer, the seller or vendor of your phone (including the carrier) disclaim any liability which may result from improper use of the phone. BATTERY:

For a non-unibody device:

Observe the following precautions:

Do not attempt to open the battery (due to the risk of toxic Do not puncture, disassemble, or cause a short circuit in fumes and burns). the battery. Do not burn or dispose of a used battery in household garbage or store it at temperatures above 60C (140F). Batteries must be disposed of in accordance with locally applicable environmental regulations. Only use the battery for the purpose for which it was designed. Never use damaged batteries or those not recommended by TCL Communication Ltd. and/or its affiliates. For a non-unibody device with a non-removable battery:

Observe the following precautions:

Do not attempt to eject, replace, or open the battery. Do not puncture, disassemble, or cause a short circuit in the battery. Do not burn or dispose of your phone in household garbage or store it at temperature above 60C (140F). Phone and battery must be disposed of in accordance with locally applicable environmental regulations. For a unibody device:

Observe the following precautions:

Do not attempt to open the back cover. Do not attempt to eject, replace, or open the battery. Do not puncture the back cover of your phone. Do not burn or dispose of your phone in household rubbish or store it at temperature above 60C (140F). Phone and battery as a unibody device must be disposed of in accordance with locally applicable environmental regulations. 3 This symbol on your phone, the battery, and the accessories means that these products must be taken to collection points at the end of their life:

Municipal waste disposal centers with specific bins for these types of equipment. Collection bins at points of sale. They will then be recycled, preventing substances being disposed of in the environment, so that their components can be reused. In European Union countries:

These collection points are accessible free of charge. All products with this sign must be brought to these collection points. In non-European Union jurisdictions:

Items of equipment with this symbol are not to be thrown into ordinary bins if your jurisdiction or your region has suitable recycling and collection facilities; instead they are to be taken to collection points for them to be recycled. In the United States you may learn more about CTIAs Recycling Program at http://www.gowirelessgogreen.org/

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. CHARGERS:

Home A.C./ Travel chargers will operate within the temperature range of: 0C (32F) to 40C (104F). The chargers designed for your phone meet the standard for safety of information technology equipment and office equipment use. Due to different applicable electrical specifications, a charger you purchased in one jurisdiction may not work in another jurisdiction. They should be used for the purpose of charging only. Characteristics of power supply (depending on the country):

Travel charger: Input: 100-240V,50/60Hz, 0.5A Output: 5V, 2A Battery: Lithium 4000mAh 4 Radio waves THIS PHONE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio-frequency (RF) energy. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. These guidelines include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health. The exposure standard for phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by public authorities such as the Federal Communications Commission of the US Government (FCC), or by Innovation, Science and Economic Development Canada

(ISEDC), is 1.6 W/kg averaged over 1 gram of body tissue. Tests for SAR are conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. This device is complied with SAR for general population /

uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2ACCJH143 Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output of the phone. Before a phone model is available for sale to the public, compliance with national regulations and standards must be shown. The highest SAR value for this model phone when tested is 0.52 W/Kg for use at the ear and 1.13 W/Kg for use close to the body. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for RF exposure. For body-worn operation, the phone meets FCC RF exposure guidelines provided that it is used with a non-metallic accessory with the handset at least 15 mm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Additional information on SAR can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site:

http://www.ctia.org/

5 The World Health Organization (WHO) considers that present scientific information does not indicate the need for any special precautions for use of phones. If individuals are concerned, they may choose to limit their own or their childrens RF exposure by limiting the length of calls, or using hands-free devices to keep phones away from the head and body. Additional WHO information about electromagnetic fields and public health is available on the following website: http://www.who.int/peh-emf. Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from interference that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. For the receiver devices associated with the operation of a licensed radio service (e.g. FM broadcast), they bear the following statement:

This phone complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Your phone is equipped with a built-in antenna. For optimal operation, you should avoid touching it or degrading it. As mobile devices offer a range of functions, they can be used in positions other than against your ear. In such circumstances the device will be compliant with the guidelines when used with a headset or usb data cable. If you are using another accessory ensure that whatever product is used is free of any metal and that it positions the phone at least 15 mm away from the body. 6 US the Information Concerning Federal Communications Commission

(FCC) Requirements for Hearing Aid Compatibility with Wireless Devices When wireless devices are used near hearing devices (such as hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference, and wireless devices also vary in the amount of interference that they generate. The wireless telephone industry has developed ratings to assist hearing device users in finding wireless devices that may be compatible with their hearing devices. Not all wireless devices have been rated. Wireless devices that are rated will have the rating displayed on the box together with other relevant approval markings. The ratings are not guarantees. Results will vary depending on the users hearing device and hearing loss. If your hearing device is vulnerable to interference, you may not be able to use a rated wireless device successfully. Consulting with your hearing health professional and testing the wireless device with your hearing device is the best way to evaluate it for your personal needs. This smartphone has been tested and rated for use with hearing aids for some of the wireless technologies that the smartphone uses. However, other wireless technologies may be used in this smartphone that have not been tested for use with hearing aids. It is important to try the different features of your smartphone thoroughly and in different locations to determine if you hear any interfering noise when using this smartphone with your hearing aid or cochlear implant. Consult your wireless service provider about its return and exchange policies, and for information about hearing aid compatibility. Hearing aid compatibility rating for this smartphone: M4/T4 How the ratings work M-Ratings: Wireless devices rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than wireless devices that are not labeled. M4 is the better or higher of the two ratings. T-Ratings: Wireless devices rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing devices telecoil (also known as a T Switch or Telephone Switch) than unrated wireless devices. T4 is the better or higher of the two ratings. Note that not all hearing devices have telecoils in them. Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from wireless devices. 7 For more information about the actions that the FCC has taken with regard to hearing aid compatibility with wireless devices and other steps that the FCC has taken to ensure that individuals with disabilities have access to telecommunications services, visit www.fcc.gov/cgb/dro. Please note that when using an accessory some of your personal data may be shared with the main device. It is your own responsibility to protect your own personal data, not to share with it with any unauthorized devices or third party devices connected to yours. For products with Wi-Fi features, only connect to trusted Wi-Fi networks. Also when using your product as a hotspot (where available), use network security. These precautions will help prevent unauthorized access to your device. Your product can store personal information in various locations including a SIM card, memory card, and built-in memory. Be sure to remove or clear all personal information before you recycle, return, or give away your product. Choose your apps and updates carefully, and only install them from trusted locations. Some apps can impact your products performance and/or have access to private information including account details, call data, location details and network resources. Note that any data shared with TCL Communication Ltd. is stored in accordance with applicable data protection legislation. For these purposes TCL Communication Ltd. implements and maintains appropriate technical and organizational measures to protect all personal data, for example against unauthorized or unlawful processing and accidental loss, destruction or damage, whereby the measures shall provide a level of security that is appropriate with regard to:

the technical possibilities available;

the costs for implementing the measures;

the risks involved with the processing of the personal data;

and the sensitivity of the personal data processed. You can access, review, and edit your personal information at any time by logging into your user account, visiting your user profile or by contacting us directly. Should you require us to edit or delete your personal data, we may ask you to provide us with evidence of your identity before we can act on your request. 8 Licenses microSD Logo is a trademark. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TCL Communication Ltd. and its affiliates is under licence. Other trademarks and trade names are those of their respective owners. TCL T603DL Bluetooth Declaration ID D048575 The Wi-Fi Logo is a certification mark of the Wi-Fi Alliance. Google, the Google logo, Android, the Android logo, Google SearchTM, Google MapsTM, GmailTM, YouTube, Google Play Store, Google LatitudeTM, and HangoutsTM are trademarks of Google Inc. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License (the text will appear when you touch Google legal in Settings > System >

About phone > Legal information) (1). You have purchased a product which uses the open source

(http://opensource.org/) programs mtd, msdosfs, netfilter/

iptables and initrd in object code and other open source programs licensed under the GNU General Public Licence and Apache Licence. We will provide you with a complete copy of the corresponding source codes upon request within a period of three years from the distribution of the product by TCL Communication Ltd. You may download the source codes from https://sourceforge. net/projects/tcl-mobile/files/. The provision of the source code is free of charge from the internet. General information Internet address: https://www.tcl.com/mx/es.html Manufacturer: TCL Communication Ltd. Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Electronic labeling path: Touch Settings > System >

Regulatory & safety or press *#07# to find more information about labeling (2), such as FCC ID. On our website, you will find our FAQ (Frequently Asked Questions) section. You can also contact us by email to ask any questions you may have. Your phone is a transceiver that operates on GSM in quad-band

(850/900/1800/1900 MHz), UMTS (B2/B4/B5) or LTE (B2/4/5/12

(MFBI)/13/66/71/25/26/41HPUE).

(1) May not be available in all countries.

(2) This may vary depending on country. 9 Protection against theft (1) Your phone is identified by an IMEI (phone serial number) shown on the packaging label and in the phones memory. We recommend that you note the number the first time you use your phone by entering *#06# and keep it in a safe place. It may be requested by the police or your carrier if your phone is stolen. This number allows your phone to be blocked preventing a third person from using it, even with a different SIM card. Disclaimer There may be certain differences between the user manual description and the phones operation, depending on the software release of your phone or specific carrier services. TCL Communication Ltd. shall not be held legally responsible for such differences, if any, nor for their potential consequences, which responsibility shall be borne by the carrier exclusively.

(1) Contact your service provider to check service availability. 10

TracFone Wireless, Inc. MODEL: T603DL TF PN: GPALT603DCGB TCL Communication Ltd. Bluetooth Declaration ID D048575 N AE2 XXXX 01 GEX Made in China FCC ID: 2ACCJH143 HAC: M4/T4 T603DL-2AKFUS11-N IMEI: 01605200000001 1 TracFone Wireless, Inc. MODEL: T603DL TF PN: GPALT603DCGB TCL Communication Ltd. Bluetooth Declaration ID D048575 N AE2 XXXX 01 GEX Made in China FCC ID: 2ACCJH143 HAC: M4/T4 T603DL-2AKFUS11-N IMEI: 01605200000001 1

FCC E-label information:

Model: T603DL Electronic labeling Path: Touch Settings System Regulatory & Safety, you can find more information about labeling, such as FCC ID. Yes The instructions are showed on User manual.

Date 2022-01-07 To: Federal Communications Commission, Authorization & Evaluation Division, 7345 Oakland Mills Road Columbia, MD 21046 And American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

CTTL-Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Regards, Zhizhou GONG Product Certification Manager TCL Communication Ltd. TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Tel: +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com

2022-01-07 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: 2ACCJH143 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application:

- Block Diagram

- Schematics

- Operational Description

- BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, Zhizhou GONG Product Certification Manager TCL Communication Ltd. TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Tel: +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com

2022-01-07 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: SHORT-TERM Confidentiality request for FCC ID: 2ACCJH143 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days:

- External Photos

- Internal Photos

- Test Setup Photos

- User manual The applicant also acknowledges that they will also provide appropriate notice to ACB should either of the following occur:

a) if the applicant requires additional 45 days extension periods they will notify ACB with a new request letter at least 7 days prior to the short-term confidentiality expiration date [Note: up to a maximum of 3 extensions only are allowed], or b) Immediately notify ACB in the event the information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Yours Sincerely, Zhizhou GONG Product Certification Manager TCL Communication Ltd. TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Tel: +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com

DFS Client Declaration Letter Date: 2022-01-21 We have declared below featured for device, FCC ID: 2ACCJH143

(1) DFS Device Master Client with Radar detection capability Client without radar detection capability

(2) Active / Passive Scanning, ad hoc mode access point capability Frequency Band (MHz) Scanning Plan Ad Hoc Mode Capability Access point Capability WiFi Direct Group Owner WiFi Direct Group Client 2412 - 2462 Active 5180 5240 Active 5260 5320 Passive 5500 5720 Passive Yes Yes No No Yes Yes No No Yes Yes No No Yes Yes Yes Yes Yes Yes 5745 - 5825 Active

(3) Country code selection capability to end user-

If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection) Yes, No Yes Yes

(4) Transmission in 5600 MHz to 5650 MHz is notched -

Yes, No Yes, No

(5) Meet Part 15.202 requirement -

A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices. A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(6) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply, Not Apply, (If apply, please help to provide explanation on it was implement, and how software was controlled). V1.0 Signature ____________________________ Printed Name: Gong Zhizhou Position: Product certification department manager Company: 2022-01-21 V1.0