FCC ID: 2ACCJB195 LINKHUB

Quick Start Guide CJB73T0LCAGC HH63AF 1 2 3 4 5 8 9 10 8 6 7 11 12 13 14 1. Power indicator 2. Network indicator On: The device is powered on. Off: The device is powered off. Blinking green: The device is registered to 3G network. Blinking blue: The device is registered to 4G network. Solid green: The device is connected to 3G network. Solid blue: The device is connected to 4G network. Solid red: Micro SIM card is not available or the device is not registered to the network. EN-2 3. Wi-Fi/WPS indicator Solid blue: Wi-Fi is enabled. Blinking blue: WPS connection is available. 4. LAN/WAN indicator Off: WiFi is disabled. On: the WAN or LAN port is connected. Off: the WAN or LAN port is not connected. 1 bar: weak signal strength. 5. Signal indicator 2 bars: good signal strength. 3 bars: excellent signal strength. 6. Reset button Off: no signal. Use a paperclip to press the button for 3 seconds to reset the device. 7. Nano SIM card slot Insert a Nano SIM card in the slot. 8. Antenna port 9. WPS button 10. Power button Install an antenna to improve signal reception. Note:

Before installing the external antennas (not provided), ensure your CPE is powered off and disconnected from the power supply. Use only antennas that are compatible with your CPE. Contact your CPE supplier before purchasing external antennas. Press the button for 3 seconds to enable the WPS function. The WPS function will be automatically disabled if a WPS connection is not established within 2 minutes. Press for 3 seconds to power off your device. Press for 1 second to power on your device. 11. Telephone port Connect to a telephone to make or answer calls. EN-3 12. LAN/WAN port 13. LAN port Used to connect to an internet source or wired devices such as computers or switches. Used to connect to wired devices such as computers or switches. 14. Power connector Used to connect to the power adapter. EN-4 1 2 Nano SIM Do not remove the Nano SIM card when your CPE is in use. EN-5 To establish a wired network connection, connect the wired device to the LAN port (LAN1/WAN port or LAN2 port) of your CPE using an Ethernet cable. To establish a wireless network connection, search for the Wi-Fi name

(SSID) of CPE on your wireless devices and then click "Connect". The Wi-Fi name (or the SSID) and the Wi-Fi key can be found on the bottom label of your CPE. To configure the CPE Wi-Fi network, open a web browser on the device connected to the CPE network wiredly or wirelessly, then go to the login website which is printed on the bottom label of your CPE and follow the on-screen instructions. Note: For the default login information, refer to the bottom label of your CPE. For a full user manual, check the Help section on the login website. EN-6 General Information Manufacturer: TCL Communication Ltd. Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Visit the TCL website at https://www.tcl.com/mx for tutorials and answers to frequently asked questions, and to download the User Manual. To get support for your device, visit the TCL website

(https://www.tcl.com/mx/es/service-support-mobile.html), or dial the number listed below:

Argentina: 0810-999-1099 Chile: +56 22 958 96 94 Colombia: 18009520823 Ecuador: 800000635 Mexico: 8008909908 Peru: 080000698 The Dominican Republic: 8887600164 Uruguay: 405296624 Venezuela: 08001005368 EN-7 Important Safety Information Read all the safety information before using your device. Failure to follow these safety instructions could result in injury, or damage to your device or other property. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. Safety and use Do not use the device in areas where wireless devices are prohibited. When the device is switched on, it should be kept at least 15 cm from any medical device such as a pacemaker, a hearing aid, or an insulin pump. Consult your physician and medical device manufacturer for information specific to your medical device. Do not let children use the device and its accessories without supervision. Always handle your device with care, and keep it in a clean and dust-free place. Do not attempt to repair the device yourself. Do not drop, throw, or bend your device. Do not dispose of the device and its accessories in a fire. Power adapter Only charge with an adapter that is compliant with the applicable international and regional safety standards. The adapter shall be CE-approved. Using other adapters could cause damage to the device or pose a risk of injury or death. Keep the adapter in a well-ventilated area when it is plugged into an electrical outlet. Dont use damaged power adapters. Input voltage/AC frequency Output voltage/

current/power 100~240 V, 50/60 Hz 12.0V / 1.0A / 12.0W Operating environment Your device is designed to work best in ambient temperatures between 0 C and 45 C (32 F and 113 F), and should be stored in ambient temperatures between 10 C and 70 C (14 F and 158 F). Your device may malfunction if operated or EN-8 stored outside of these temperature ranges. Avoid exposing the device to dramatic changes in temperature or humidity. Radio waves THIS DEVICE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES

.FCC ID: 2ACCJB195 Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

:encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna;

Increase the separation between the equipment and receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the party responsible for

.compliance could void the users authority to operate the equipment For the receiver devices associated with the operation of a licensed radio service (e.g.

:FM broadcast), they bear the following statement

.This device complies with Part 15 of the FCC Rules

:Operation is subject to the following two conditions This device may not cause harmful interference;

This device must accept any interference received, including interference that may cause undesired operation. Your device is a transceiver that operates on UMTS/HSPA/HSPA+/DC HSPA+ in quadband (B1/2/4/5) or LTE (B2/4/5/7/28/66). EN-9 Licenses Wi-Fi Alliance certified Privacy statement of device usage Any personal data you shared with TCL Communication Ltd. will be handled in accordance with our Privacy Notice. You can check our Privacy Notice by visiting our website: https://www.tcl.com/global/en/communication-privacy-policy Disclaimer There may be certain differences between the user manual description and the devices operation, depending on the software release of your device or specific operator services. TCL Communication Ltd. shall not be held legally responsible for such differences, if any, nor for their potential consequences, which responsibility shall be borne by the operator exclusively. Repair or replacement may be carried out using reconditioned components offering equivalent functionality. This warranty covers the costs of repair or replacement (labour and spare parts) but excludes any other costs. EN-10

Quick Start Guide HH63AF 1 2 3 4 5 8 9 6 7 10 11 12 13 1. Power indicator On: The device is powered on. Off: The device is powered off. Blinking green: The device is registered to 3G network. Blinking blue: The device is registered to 4G network. 2. Network indicator Solid green: The device is connected to 3G network. 3. Wi-Fi/WPS indicator Solid blue: Wi-Fi is enabled. Blinking blue: WPS connection is available. 4. LAN/WAN indicator Off: WiFi is disabled. On: the WAN or LAN port is connected. Off: the WAN or LAN port is not connected. 1 bar: weak signal strength. 5. Signal indicator 2 bars: good signal strength. 3 bars: excellent signal strength. 6. Reset button Off: no signal. Use a paperclip to press the button for 3 seconds to reset the device. 7. Nano SIM card slot Insert a Nano SIM card in the slot. 8. WPS button 9. Power button 10. Telephone port

(Optional) 11. LAN/WAN port 12. LAN port Press the button for 3 seconds to enable the WPS function. The WPS function will be automatically disabled if a WPS connection is not established within 2 minutes. Press for 3 seconds to power off your device. Press for 1 second to power on your device. Connect to a telephone to make or answer calls. Used to connect to an internet source or wired devices such as computers or switches. Used to connect to wired devices such as computers or switches. Solid blue: The device is connected to 4G 13. Power connector Used to connect to the power adapter. network. Solid red: Micro SIM card is not available or the device is not registered to the network. EN-2 EN-3 1 2 Nano SIM Do not remove the Nano SIM card when your CPE is in use. To establish a wired network connection, connect the wired device to the LAN port of your CPE using an Ethernet cable. To establish a wireless network connection, search for the Wi-Fi name on your wireless devices. The Wi-Fi name (or the SSID) and the Wi-Fi key can be found on the bottom label of your CPE. To configure the CPE Wi-Fi network, open a web browser on the device connected to the CPE network wiredly or wirelessly, then go to the login website which is printed on the bottom label of your CPE and follow the on-screen instructions. Note: For the default login information, refer to the bottom label of your CPE. For a full user manual, check the Help section on the login website. The TEL port/telephone function is optional depending on the device you purchase. EN-4 EN-5 General Information Manufacturer: TCL Communication Ltd. Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Visit the TCL website at https://www.tcl.com/mx for tutorials and answers to frequently asked questions, and to download the User Manual. To get support for your device, visit the TCL website

(https://www.tcl.com/mx/es/service-support-mobile.html), or dial the number listed below:

Argentina: 0810-999-1099 Chile: +56 22 958 96 94 Colombia: 18009520823 Ecuador: 800000635 Mexico: 8008909908 Peru: 080000698 The Dominican Republic: 8887600164 Uruguay: 405296624 Venezuela: 08001005368 EN-6 Important Safety Information Read all the safety information before using your device. Failure to follow these safety instructions could result in injury, or damage to your device or other property. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. Safety and use Do not use the device in areas where wireless devices are prohibited. When the device is switched on, it should be kept at least 15 cm from any medical device such as a pacemaker, a hearing aid, or an insulin pump. Consult your physician and medical device manufacturer for information specific to your medical device. Do not let children use the device and its accessories without supervision. Always handle your device with care, and keep it in a clean and dust-free place. Do not attempt to repair the device yourself. Do not drop, throw, or bend your device. Do not dispose of the device and its accessories in a fire. Power adapter Only charge with an adapter that is compliant with the applicable international and regional safety standards. The adapter shall be CE-approved. Using other adapters could cause damage to the device or pose a risk of injury or death. Keep the adapter in a well-ventilated area when it is plugged into an electrical outlet. Dont use damaged power adapters. Input voltage/AC frequency Output voltage/

current/power 100~240 V, 50/60 Hz 12.0V / 1.0A / 12.0W Operating environment Your device is designed to work best in ambient temperatures between 0 C and 45 C (32 F and 113 F), and should be stored in ambient temperatures between 10 C and 70 C (14 F and 158 F). Your device may malfunction if operated or EN-7 stored outside of these temperature ranges. Avoid exposing the device to dramatic changes in temperature or humidity. Licenses Wi-Fi Alliance certified Privacy statement of device usage Any personal data you shared with TCL Communication Ltd. will be handled in accordance with our Privacy Notice. You can check our Privacy Notice by visiting our website: https://www.tcl.com/global/en/communication-privacy-policy Disclaimer There may be certain differences between the user manual description and the devices operation, depending on the software release of your device or specific operator services. TCL Communication Ltd. shall not be held legally responsible for such differences, if any, nor for their potential consequences, which responsibility shall be borne by the operator exclusively. Repair or replacement may be carried out using reconditioned components offering equivalent functionality. This warranty covers the costs of repair or replacement (labour and spare parts) but excludes any other costs. Radio waves THIS DEVICE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES

.FCC ID: 2ACCJB195 Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

:encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna;

Increase the separation between the equipment and receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the party responsible for

.compliance could void the users authority to operate the equipment For the receiver devices associated with the operation of a licensed radio service (e.g.

:FM broadcast), they bear the following statement

.This device complies with Part 15 of the FCC Rules

:Operation is subject to the following two conditions This device may not cause harmful interference;

This device must accept any interference received, including interference that may cause undesired operation. Your device is a transceiver that operates on GSM in quad-band (B2/3/5/8), UMTS in penta-band (B1/2/4/5/8) or LTE (B2/3/4/5/7/8/12/13/17/26/28/38/40/66). EN-8 EN-9 1 2 3 4 5 8 9 Gua de inicio rpido 6 7 10 11 12 13 1. Indicador de encendido Activado: el dispositivo est encendido. Apagado: el dispositivo est apagado. Verde parpadeante: el dispositivo est registrado a la red 3G. Azul parpadeante: el dispositivo est registrado a la red 4G. Verde fijo: el dispositivo est conectado a la red 2. Indicador de red 3G. Azul fijo: el dispositivo est conectado a la red 4G. Rojo fijo: no hay ninguna tarjeta micro SIM disponible o el dispositivo no est registrado a la red. HH63AF ES -10 ES - 11 1 2 Nano SIM No retire la nano SIM cuando se est usando el CPE. 3. Indicador de Wi-Fi/WPS Azul parpadeante: la conexin WPS est disponible. Azul fijo: el Wi-Fi est conectado. Apagado: la Wi-Fi est desactivada. Activado: el puerto LAN o WAN est conectado. 4. Indicador de LAN/WAN Desactivado: el puerto LAN o WAN no est 5. Indicador de seal 6. Botn de restablecimiento 7. Ranura para la tarjeta nano SIM 8. Botn WPS 9. Botn de Encendido 10. Puerto telefnico

(opcional) 11. Puerto de LAN/WAN 12. Puerto LAN conectado. 1 barra: la fuerza de la seal es dbil. 2 barras: la fuerza de la seal es buena. 3 barras: la fuerza de la seal es excelente. Apagado: no hay seal. Con un clip, pulse el botn durante 3 segundos para restablecer el dispositivo. Inserte una tarjeta nano SIM en la ranura. Mantenga pulsado el botn por 3 segundos para activar la funcin WPS. La funcin WPS se desactivar automticamente si no se establece una conexin WPS en el plazo de 2 minutos. Mantenga pulsado el botn por 3 segundos para apagar su dispositivo. Mantenga pulsado el botn por 1 segundo para encender su dispositivo. Conctese a un telfono para realizar o recibir llamadas. Se utiliza para conectar a una fuente de Internet o a dispositivos con cable como computadoras o switches. Se utiliza para conectar a dispositivos con cable como computadoras o switches. 13. Conector de encendido Se utiliza para conectar al adaptador de corriente. La funcin de puerto TEL/telfono es opcional dependiendo del ES -12 dispositivo que haya comprado. ES - 13 Informacin general Fabricante: TCL Communication Ltd. Direccin: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Visite el sitio web de TCL en https://www.tcl.com/mx para consultar tutoriales y respuestas a preguntas frecuentes, y descargar el manual de usuario. Pa ra o bt e n e r a s i s t e n c i a p a ra s u d i s p o s i t i vo , v i s i t e e l s i t i o we b d e TC L

(https://www.tcl.com/mx/es/service-support-mobile.html), o marque el nmero siguiente:

Argentina: 0810-999-1099 Chile: +56 22 958 96 94 Colombia: 18009520823 Ecuador: 800000635 Mxico: 8008909908 Per: 080000698 Repblica Dominicana: 8887600164 Uruguay: 40529662 Venezuela: 08001005368 Para establecer una conexin a la red con cables, conecte el dispositivo con cable al puerto LAN de su CPE con un cable Ethernet. Para establecer una conexin a la red inalmbrica, busque el nombre Wi-Fi en sus dispositivos inalmbricos. El nombre Wi-Fi (o el SSID) y la clave se pueden encontrar en la etiqueta inferior de su CPE. Para configurar la red Wi-Fi del CPE, abra un navegador web en el dispositivo conectado a la red CPE con cable o de forma inalmbrica, ingrese al sitio web de inicio de sesin que est impreso en la etiqueta inferior del CPE y siga las instrucciones que aparecen en la pantalla. Importante: La informacin de inicio de sesin predeterminada se puede encontrar en la etiqueta de la cara inferior del CPE. El puerto TEL es opcional dependiendo del dispositivo que haya comprado. ES -14 ES - 15 Informacin importante de seguridad Lea toda la informacin de seguridad antes de usar el dispositivo. No seguir estas instrucciones de seguridad podra resultar en lesiones o daos al dispositivo u otra propiedad. El fabricante no se har responsable de las consecuencias que resulten de una utilizacin inadecuada del dispositivo y/o no conforme a las instrucciones contenidas en este instructivo de uso. Instrucciones de seguridad y manejo No utilice el dispositivo en reas donde los dispositivos inalmbricos estn prohibidos. Cuando el dispositivo est encendido, no lo coloque nunca a menos de 15 cm de un aparato mdico como un marcapasos, una prtesis auditiva o una bomba de insulina. Consulte a su mdico y al fabricante del dispositivo mdico para obtener informacin especfica sobre el dispositivo mdico. No deje a los nios usar el dispositivo ni sus accesorios sin supervisin. Tenga siempre mucho cuidado al utilizar su dispositivo y gurdelo en un lugar limpio y sin polvo. No intente reparar el dispositivo por su cuenta. No deje que se le caiga el dispositivo y no lo arroje ni lo doble. Adaptador de corriente Cargue el dispositivo con el cable USB suministrado. Lleve a cabo la carga slo con un adaptador que cumpla los estndares de seguridad internacionales y regionales. El adaptador deber tener la homologacin CE. El uso de otros adaptadores podra daar el dispositivo o suponer un riesgo de lesin o muerte. Mantenga el adaptador en un rea bien ventilada cuando est enchufado a una toma de corriente. No utilice adaptadores de corriente daados. Entorno operativo El dispositivo est diseado para funcionar correctamente a temperatura ambiente entre 0 C y 45 C (32 F y 113 F), y se debe almacenar a una temperatura ambiente entre -10 C y 70 C (14 F y 158 F). El dispositivo puede funcionar mal si se opera o se almacena fuera del rango de temperatura. Evite exponer el dispositivo a cambios importantes de temperatura o humedad. Si desea deshacerse del dispositivo, el accesorio y la batera, debe hacerlo de conformidad con la legislacin sobre la proteccin del medio ambiente en vigor. Si su dispositivo, batera o accesorios tienen este smbolo, deber llevarlos a uno de estos puntos de recoleccin cuando estn fuera de uso:

Centros de desecho municipales con contenedores especficos para este tipo de equipos. Contenedores en los puntos de venta. Ondas de radio ESTE TELFONO CUMPLE CON LAS EXIGENCIAS ESTATALES EN MATERIA DE EXPOSICIN A LAS ONDAS DE RADIO FCC ID: 2ACCJB195 Importante: Este dispositivo ha sido probado y se confirma que cumple con los lmites para un dispositivo digital Clase B, de conformidad con la parte 15 de las Reglas FCC. Estos lmites estn diseados para ofrecer una proteccin razonable en contra de la interferencia daina cuando el equipo se opera en un entorno comercial. Este equipo genera, usa y puede emitir energa de radiofrecuencia, por lo que en el caso de no instalarse ni usarse de acuerdo con el instructivo de uso podra causar una interferencia daina en las radiocomunicaciones. No obstante, no se garantiza que no se produzca ninguna interferencia en la recepcin de radio o televisor, lo que puede comprobarse encendiendo y apagando el equipo. Es recomendable que el usuario corrija dichas interferencias mediante uno o varios de los siguientes procedimientos:

Voltaje de entrada/Frecuencia AC 100~240 V, 50/60 Hz Cambie la orientacin o la ubicacin de la antena receptora. Voltaje de salida/corriente/potencia 5.0 V/1.0 A/5.0 W Aumente la separacin entre el equipo y el receptor. Conecte el equipo a una toma de corriente de un circuito distinto al que est conectado el receptor. Consulte con el distribuidor o tcnico de radio o televisor cualificado para obtener asistencia. ES -16 ES - 17 Los cambios o modificaciones que no hayan sido expresamente aprobados por la parte responsable por el cumplimiento de las normas, podra cancelar el derecho del usuario a usar el equipo Para dispositivos de recepcin asociados con un servicio de radio bajo licencia (Radio FM

:por ejemplo), se aplica la siguiente declaracin Este dispositivo cumple con lo dispuesto en el apartado 15 de las normas de la Comisin

.Federal de Comunicaciones del gobierno de los Estados Unidos

:La operacin se encuentra sujeta a las siguientes dos condiciones Este dispositivo podra no causar interferencias dainas. Este dispositivo debe aceptar cualquier interferencia recibida, incluyendo la interferencia que podra causar una operacin no deseada.Licencias Licencias Certificado por Wi-Fi Alliance Declaracin de privacidad del uso del dispositivo Cualquier dato personal compartido con TCL Communication Ltd. se gestionar de acuerdo con nuestro Aviso de Privacidad. Puede consultar el Aviso de Privacidad en nuestro sitio web: https://www.tcl.com/global/en/communication-privacy-policy Exencin de responsabilidad Puede encontrar determinadas diferencias entre la descripcin en este manual de usuario y el funcionamiento real del dispositivo, dependiendo de su versin de software o de los servicios especficos de cada operador. TCL Communication Ltd. no se responsabiliza legalmente de dichas diferencias si existieran, ni tampoco de las posibles consecuencias, cuya responsabilidad debera recaer en el operador. ES -18

Quick Start Guide CJB73T0LCAGB HH63AF 1 2 3 4 5 8 9 6 7 10 11 12 13 1. Power indicator 2. Network indicator On: The device is powered on. Off: The device is powered off. Blinking green: The device is registered to 3G network. Blinking blue: The device is registered to 4G network. Solid green: The device is connected to 3G network. Solid blue: The device is connected to 4G network. Solid red: Nano SIM card is not available or the device is not registered to the network. EN-2 3. Wi-Fi/WPS indicator Solid blue: Wi-Fi is enabled. Blinking blue: WPS connection is available. 4. LAN/WAN indicator Off: Wi-Fi is disabled. On: the WAN or LAN port is connected. Off: the WAN or LAN port is not connected. 1 bar: weak signal strength. 5. Signal indicator 2 bars: good signal strength. 3 bars: excellent signal strength. 6. Reset button Off: no signal. Use a paperclip to press the button for 3 seconds to reset the device. 7. Nano SIM card slot Insert a Nano SIM card in the slot. 8. WPS button 9. Power button 10. Telephone port

(Optional) 11. LAN/WAN port 12. LAN port Press the button for 3 seconds to enable the WPS function. The WPS function will be automatically disabled if a WPS connection is not established within 2 minutes. Press for 3 seconds to power off your device. Press for 1 second to power on your device. Connect to a telephone to make or answer calls. Used to connect to an internet source or wired devices such as computers or switches. Used to connect to wired devices such as computers or switches. 13. Power connector Used to connect to the power adapter. EN-3 1 2 Nano SIM Do not remove the Nano SIM card when your CPE is in use. The TEL port/telephone function is optional depending on the device you purchase. EN-4 To establish a wired network connection, connect the wired device to the LAN port of your CPE using an Ethernet cable. To establish a wireless network connection, search for the Wi-Fi name on your wireless devices. The Wi-Fi name (or the SSID) and the Wi-Fi key can be found on the bottom label of your CPE. To configure the CPE Wi-Fi network, open a web browser on the device connected to the CPE network wiredly or wirelessly, then go to the login website which is printed on the bottom label of your CPE and follow the on-screen instructions. Note: For the default login information, refer to the bottom label of your CPE. For a full user manual, check the Help section on the login website. EN-5 General Information Manufacturer: TCL Communication Ltd. Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Visit the TCL website at https://www.tcl.com/mx for tutorials and answers to frequently asked questions, and to download the User Manual. To get support for your device, visit the TCL website

(https://www.tcl.com/mx/es/service-support-mobile.html), or dial the number listed below:

Argentina: 0810-999-1099 Chile: +56 22 958 96 94 Colombia: 18009520823 Ecuador: 800000635 Mexico: 8008909908 Peru: 080000698 The Dominican Republic: 8887600164 Uruguay: 405296624 Venezuela: 08001005368 EN-6 Important Safety Information Read all the safety information before using your device. Failure to follow these safety instructions could result in injury, or damage to your device or other property. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. Safety and use Do not use the device in areas where wireless devices are prohibited. When the device is switched on, it should be kept at least 15 cm from any medical device such as a pacemaker, a hearing aid, or an insulin pump. Consult your physician and medical device manufacturer for information specific to your medical device. Do not let children use the device and its accessories without supervision. Always handle your device with care, and keep it in a clean and dust-free place. Do not attempt to repair the device yourself. Do not drop, throw, or bend your device. Do not dispose of the device and its accessories in a fire. Power adapter Only charge with an adapter that is compliant with the applicable international and regional safety standards. The adapter shall be CE-approved. Using other adapters could cause damage to the device or pose a risk of injury or death. Keep the adapter in a well-ventilated area when it is plugged into an electrical outlet. Dont use damaged power adapters. Input voltage/AC frequency 100~240 V, 50/60 Hz Output voltage/current/power 12.0V / 1.0A / 12.0W Operating environment Your device is designed to work best in ambient temperatures between 0 C and 45 C (32 F and 113 F), and should be stored in ambient temperatures between 10 C and 70 C (14 F and 158 F). Your device may malfunction if operated or EN-7 stored outside of these temperature ranges. Avoid exposing the device to dramatic changes in temperature or humidity. Radio waves THIS DEVICE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES FCC ID: 2ACCJB195 Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. For the receiver devices associated with the operation of a licensed radio service (e.g. FM broadcast), they bear the following statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference;

This device must accept any interference received, including interference that may cause undesired operation. Your device is a transceiver that operates on UMTS/HSPA/HSPA+/DC HSPA+ in quad-

band (B1/2/4/5) or LTE (B2/4/5/7/28/66). EN-8 Licenses Wi-Fi Alliance certified Privacy statement of device usage Any personal data you shared with TCL Communication Ltd. will be handled in accordance with our Privacy Notice. You can check our Privacy Notice by visiting our website: https://www.tcl.com/global/en/communication-privacy-policy Disclaimer There may be certain differences between the user manual description and the devices operation, depending on the software release of your device or specific operator services. TCL Communication Ltd. shall not be held legally responsible for such differences, if any, nor for their potential consequences, which responsibility shall be borne by the operator exclusively. Repair or replacement may be carried out using reconditioned components offering equivalent functionality. This warranty covers the costs of repair or replacement (labour and spare parts) but excludes any other costs. EN-9 Gua de inicio rpido ES -1 HH63AF 1 2 3 4 5 8 9 6 7 10 11 12 13 1. Indicador de encendido Activado: el dispositivo est encendido. Apagado: el dispositivo est apagado. Verde parpadeante: el dispositivo est registrado a la red 3G. Azul parpadeante: el dispositivo est registrado a la red 4G. Verde fijo: el dispositivo est conectado a la red 2. Indicador de red 3G. Azul fijo: el dispositivo est conectado a la red 4G. Rojo fijo: no hay ninguna tarjeta nano SIM disponible o el dispositivo no est registrado a la red. ES - 2 3. Indicador de Wi-Fi/WPS Azul fijo: el Wi-Fi est conectado. Azul parpadeante: la conexin WPS est disponible. Apagado: la Wi-Fi est desactivada. Activado: el puerto LAN o WAN est conectado. 4. Indicador de LAN/WAN Desactivado: el puerto LAN o WAN no est 5. Indicador de seal 6. Botn de restablecimiento 7. Ranura para la tarjeta nano SIM 8. Botn WPS 9. Botn de Encendido 10. Puerto telefnico

(opcional) 11. Puerto de LAN/WAN 12. Puerto LAN conectado. 1 barra: la fuerza de la seal es dbil. 2 barras: la fuerza de la seal es buena. 3 barras: la fuerza de la seal es excelente. Apagado: no hay seal. Con un clip, pulse el botn durante 3 segundos para restablecer el dispositivo. Inserte una tarjeta nano SIM en la ranura. Mantenga pulsado el botn por 3 segundos para activar la funcin WPS. La funcin WPS se desactivar automticamente si no se establece una conexin WPS en el plazo de 2 minutos. Mantenga pulsado el botn por 3 segundos para apagar su dispositivo. Mantenga pulsado el botn por 1 segundo para encender su dispositivo. Conctese a un telfono para realizar o recibir llamadas. Se utiliza para conectar a una fuente de Internet o a dispositivos con cable como computadoras o switches. Se utiliza para conectar a dispositivos con cable como computadoras o switches. 13. Conector de encendido Se utiliza para conectar al adaptador de corriente. ES -3 1 2 Nano SIM No retire la nano SIM cuando se est usando el CPE. La funcin de puerto TEL/telfono es opcional dependiendo del dispositivo que haya comprado. ES - 4 Para establecer una conexin a la red con cables, conecte el dispositivo con cable al puerto LAN de su CPE con un cable Ethernet. Para establecer una conexin a la red inalmbrica, busque el nombre Wi-Fi en sus dispositivos inalmbricos. El nombre Wi-Fi (o el SSID) y la clave se pueden encontrar en la etiqueta inferior de su CPE. Para configurar la red Wi-Fi del CPE, abra un navegador web en el dispositivo conectado a la red CPE con cable o de forma inalmbrica, ingrese al sitio web de inicio de sesin que est impreso en la etiqueta inferior del CPE y siga las instrucciones que aparecen en la pantalla. Importante: La informacin de inicio de sesin predeterminada se puede encontrar en la etiqueta de la cara inferior del CPE. El puerto TEL es opcional dependiendo del dispositivo que haya comprado. ES -5 Informacin general Fabricante: TCL Communication Ltd. Direccin: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Visite el sitio web de TCL en https://www.tcl.com/mx para consultar tutoriales y respuestas a preguntas frecuentes, y descargar el manual de usuario. Para obtener asistencia para su dispositivo, visite el sitio web de TCL

(https://www.tcl.com/mx/es/service-support-mobile.html), o marque el nmero siguiente:

Argentina: 0810-999-1099 Chile: +56 22 958 96 94 Colombia: 18009520823 Ecuador: 800000635 Mxico: 8008909908 Per: 080000698 Repblica Dominicana: 8887600164 Uruguay: 40529662 Venezuela: 08001005368 ES - 6 Informacin importante de seguridad Lea toda la informacin de seguridad antes de usar el dispositivo. No seguir estas instrucciones de seguridad podra resultar en lesiones o daos al dispositivo u otra propiedad. El fabricante no se har responsable de las consecuencias que resulten de una utilizacin inadecuada del dispositivo y/o no conforme a las instrucciones contenidas en este instructivo de uso. Instrucciones de seguridad y manejo No utilice el dispositivo en reas donde los dispositivos inalmbricos estn prohibidos. Cuando el dispositivo est encendido, no lo coloque nunca a menos de 15 cm de un aparato mdico como un marcapasos, una prtesis auditiva o una bomba de insulina. Consulte a su mdico y al fabricante del dispositivo mdico para obtener informacin especfica sobre el dispositivo mdico. No deje a los nios usar el dispositivo ni sus accesorios sin supervisin. Tenga siempre mucho cuidado al utilizar su dispositivo y gurdelo en un lugar limpio y sin polvo. No intente reparar el dispositivo por su cuenta. No deje que se le caiga el dispositivo y no lo arroje ni lo doble. Adaptador de corriente Cargue el dispositivo con el cable USB suministrado. Lleve a cabo la carga slo con un adaptador que cumpla los estndares de seguridad internacionales y regionales. El adaptador deber tener la homologacin CE. El uso de otros adaptadores podra daar el dispositivo o suponer un riesgo de lesin o muerte. Mantenga el adaptador en un rea bien ventilada cuando est enchufado a una toma de corriente. No utilice adaptadores de corriente daados. Voltaje de entrada/Frecuencia AC 100~240 V, 50/60 Hz Voltaje de salida/corriente/potencia 5.0 V/1.0 A/5.0 W ES -7 Entorno operativo El dispositivo est diseado para funcionar correctamente a temperatura ambiente entre 0 C y 45 C (32 F y 113 F), y se debe almacenar a una temperatura ambiente entre -10 C y 70 C (14 F y 158 F). El dispositivo puede funcionar mal si se opera o se almacena fuera del rango de temperatura. Evite exponer el dispositivo a cambios importantes de temperatura o humedad. Si desea deshacerse del dispositivo, el accesorio y la batera, debe hacerlo de conformidad con la legislacin sobre la proteccin del medio ambiente en vigor. Si su dispositivo, batera o accesorios tienen este smbolo, deber llevarlos a uno de estos puntos de recoleccin cuando estn fuera de uso:

Centros de desecho municipales con contenedores especficos para este tipo de equipos. Contenedores en los puntos de venta. Ondas de radio ESTE TELFONO CUMPLE CON LAS EXIGENCIAS ESTATALES EN MATERIA DE EXPOSICIN A LAS ONDAS DE RADIO FCC ID: 2ACCJB195 Importante: Este dispositivo ha sido probado y se confirma que cumple con los lmites para un dispositivo digital Clase B, de conformidad con la parte 15 de las Reglas FCC. Estos lmites estn diseados para ofrecer una proteccin razonable en contra de la interferencia daina cuando el equipo se opera en un entorno comercial. Este equipo genera, usa y puede emitir energa de radiofrecuencia, por lo que en el caso de no instalarse ni usarse de acuerdo con el instructivo de uso podra causar una interferencia daina en las radiocomunicaciones. No obstante, no se garantiza que no se produzca ninguna interferencia en la recepcin de radio o televisor, lo que puede comprobarse encendiendo y apagando el equipo. Es recomendable que el usuario corrija dichas interferencias mediante uno o varios de los siguientes procedimientos:

Cambie la orientacin o la ubicacin de la antena receptora. Aumente la separacin entre el equipo y el receptor. Conecte el equipo a una toma de corriente de un circuito distinto al que est conectado el receptor. ES - 8 Consulte con el distribuidor o tcnico de radio o televisor cualificado para obtener asistencia. Los cambios o modificaciones que no hayan sido expresamente aprobados por la parte responsable por el cumplimiento de las normas, podra cancelar el derecho del usuario a usar el equipo Para dispositivos de recepcin asociados con un servicio de radio bajo licencia (Radio FM por ejemplo), se aplica la siguiente declaracin:

Este dispositivo cumple con lo dispuesto en el apartado 15 de las normas de la Comisin Federal de Comunicaciones del gobierno de los Estados Unidos. La operacin se encuentra sujeta a las siguientes dos condiciones:

Este dispositivo podra no causar interferencias dainas. Este dispositivo debe aceptar cualquier interferencia recibida, incluyendo la interferencia que podra causar una operacin no deseada. Este dispositivo es un transceptor que opera por 3G/UMTS/HSPA/HSPA+/DC HSPA+ en cinco bandas B1/2/4/5 o 4G en once bandas B2/4/5/7/28/66. Licencias Certificado por Wi-Fi Alliance Declaracin de privacidad del uso del dispositivo Cualquier dato personal compartido con TCL Communication Ltd. se gestionar de acuerdo con nuestro Aviso de Privacidad. Puede consultar el Aviso de Privacidad en nuestro sitio web: https://www.tcl.com/global/en/communication-privacy-policy Exencin de responsabilidad Puede encontrar determinadas diferencias entre la descripcin en este manual de usuario y el funcionamiento real del dispositivo, dependiendo de su versin de software o de los servicios especficos de cada operador. TCL Communication Ltd. no se responsabiliza legalmente de dichas diferencias si existieran, ni tampoco de las posibles consecuencias, cuya responsabilidad debera recaer en el operador. ES -9

Declaration of changes from Initial (HH63AF) to Variant (HH63AF) 5F, C building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 TEL: +86(0)21 61460666 FAX: +86(0)21 61460602 SOFTWARE MODIFICATIONS:

Protocol Stack changes: NO MMS/STK/USAT/USIM changes: NO DM/SUPL/VT/FUMO/SWP/HCI: NO Other changes detailed: NO HARDWARE MODIFICATIONS:

Baseband changes: NO Band changes: NO GSM Product HH63AF HH63AF NA NA UMTS NO NO LTE NO NO Antenna changes: HH63AF support two external antennassupport transmission and reception. PCB Layout changes: NO Main components changes: NO Base Band Transceiver ASM Power Amplifier Tx SAW Filter UMTS FDD I UMTS FDD II UMTS FDD IV UMTS FDD V NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO Rx SAW FilterSAW Duplexer NO NO NO NO LTE B2 LTE B4 LTE B5 LTE B7 LTE B28 LTE B66 WiFi Base Band Transceiver ASM Power Amplifier Tx SAW Filter NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO Rx SAW FilterSAW Duplexer NO NO NO NO NO NO Antenna NO AP NO MODEM NO Transceiver NO Balun NO Band pass filter NO diplexer NO WiFi changes: No Other components changes: HH63AF adds two SMA connectors to support external antennas. The addition of an external antenna does not affect the wifi part, only the cellular part. Other changes detailed: No Accessories HH63AF HH63AF Remark Charger Battery USB cable Headset NA NA NA NA NA NA NA NA MECHANICAL MODIFICATIONS:

Use new metal front/back cover or keypad: NO Mechanical shell changes: NO Whole size of EUT: NO Distance of Ear reference point to bottom of handset: NO Other trinkets to change the surface of handset: NO Other changes detailed: The HH63AF back cover has 2 external antenna openings APPROVED BY:

Project Manager: Patrick MA Signature:

Date:2023.02.06

Date: Jan. 30, 23 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland21046 Subject: FCC Class II Permissive change for FCC ID: 2ACCJB195 (Model: HH63AF) To Whom It May Concern, This is to request a Class II Permissive change for FCC ID: 2ACCJB195 (Model : HH63AF) granted on 11/30/2022. The Major change filed under this application is as below, otherwise are identical. SOFTWARE MODIFICATIONS:

Protocol Stack changes: no change MMS/ STK/ USAT/ USIM changes: no change DM/ SUPL/ VT/ FUMO/ SWP/ HCI: no change Other changes detailed: no change HARDWARE MODIFICATIONS:

Baseband changes: NO Band changes: NO Product GSM HH63AF HH63AF NA NA UMTS NO NO LTE NO NO Antenna changes: HH63AF support two external antennas PCB Layout changes: NO Main components changes: NO Base Band Transceiver ASM Power Amplifier Tx SAW Filter Rx SAW FilterSAW Duplexer UMTS FDD I UMTS FDD II UMTS FDD IV UMTS FDD V UMTS FDD VIII NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO Base Band Transceiver ASM Power Amplifier Tx SAW Filter Rx SAW FilterSAW Duplexer LTE B2 LTE B4 LTE B5 LTE B7 LTE B28 LTE B66 WiFi NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO Antenna NO AP NO MODEM NO Transceiver NO Balun NO Band pass filter NO diplexer NO WiFi changes: No Other components changes: HH63AF adds two SMA connectors to support external antennas Other changes detailed: No Accessories HH63AF HH63AF Remark Charger Battery USB cable Headset NA NA NA NA NA NA NA NA MECHANICAL MODIFICATIONS:

Use new metal front/back cover or keypad: NO Mechanical shell changes: NO Whole size of EUT: NO Distance of Ear reference point to bottom of handset: NO Other trinkets to change the surface of handset: NO Other changes detailed: The HH63AF back cover has 2 external antenna openings For details, please refer Declaration of changes provided by TCL. For the above, we performed test as below, other test result coming from the initial model. For details, please refer to the relevant test reports. Adding charger, Headset, Battery FCC certification part1 5 B testing additional for 1 charger UMTS part UMTS mobile phone FCC certification part22/24 testing UMTS mobile phone FCC certification part27 testing LTE part LTE mobile phone FCC certification part22/24/27 testing 1900850Radiated TCs for adding antenna Radiated TCs for adding antenna Band2/5/7/66 Radiated TCs for adding antenna,band 4 no test WiFi part Wi-Fi FCC Part15E DFS master testing for 5GHz 802.11a/n/ac per antenna port share basic model results WiFi 802.11a/n/ac 5G UNII-1&2A&2C&3(BW20&40&80MHz) FCC certification part15E testing share basic model results WiFi 802.11b/g/n 2.4G (BW20&40MHz) FCC certification part15C testing share basic model results USB part FCC certification part1 5 B testing RE for adding antenna Certification part GSM/UMTS/LTE TCB Certification FCC MPE SAR testing PC II All TCs Thank you. Sincerely, Name:

Title:

Company Name: TCL Communication Ltd. Company address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong

TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Declaration of Frequency Stability We [TCL Communication Ltd.] ensure that the product meets e-CFR Title 47 section 15.407(g) and KDB 789033 D02v02r01 frequency stability such that the emissions are maintained within the band of operation under all conditions of normal operation as specified in the user's manual. Sincerely Yours, Print Name: Annie Jiang Title: Product Certification Manager Company Name: TCL Communication Ltd. Tel: +86 755 3661 1621 Email: nianxiang.jiang@tcl.com

FCC ID: 2ACCJB195 This device compliance with the latest revision of KDB publication 594280 D02 U-NII Device Security v01r03:

The information within this section of the Operational Description is to show compliance against the Software Security Requirements laid out within HH63AF Security. The information below describes how we maintain the overall security measures and systems so that only:

1. Authenticated software is loaded and operating on the device 2. The device is not easily modified to operate with RF parameters outside of the authorization General Description 1. Describe how any software/firmware updates for elements than can affect the devices RF parameters will be obtained, downloaded, validated and installed. For software that is accessed through manufacturers website or devices management system, describe the different levels of security as appropriate. 2. Describe the RF parameters that are modified by any software/firmware without any hardware changes. Are these parameters in some way limited such that any other software/firmware changes will not allow the device to exceed the authorized RF characteristics?

3. Describe in detail the authentication protocols that are in place to ensure that the source of the RF-related software/firmware is valid. Describe in detail how the RF-related software is protected against modification. The software/firmware update is bundled, as part of System updates process, the user or installer cannot modify the contents. The update and installation proceed automatically once the user accepts or launches System updates process. Radio parameters are fixed at time of production as required by the FCC certification. Any future software/firmware release for System updates is verified by the TCL before release. If required, TCL will follow FCC permissive change procedure. Radio parameters are fixed at time of production as required by the FCC certification. Any future software/firmware release for System updates is verified by the TCL before release. If required, TCL will follow FCC permissive change procedure. 4. Describe in detail any encryption Yes, see answer to #1 and #3. methods used to support the use of legitimate RF-related software/firmware. 5. For a device that can be configured as a master and client (with active or passive scanning), explain how the device ensures compliance for each mode? In particular if the device acts as master in some band of operation and client in another; how is compliance ensured in each band of operation?

For a device act as a master, the 5G and 2.4G channel bands of operation will be restricted by regional regulations profile. The device not act as a client KDB 594280 D02 U-NII Device Security v01r01 Information Page 1 of 3 3rd Party Access Control 1. Explain if any third parties have the capability to operate a U.S.-sold device on any other regulatory domain, frequencies, or in any manner that may allow the device to operate in violation of the devices authorization if activated in the U.S. No third-parties will get rights to modify system property and files. 2. Describe, if the device permits third-

No party software or firmware installation, what mechanisms are provided by the manufacturer to permit integration of such functions while ensuring that the RF parameters of the device cannot be operated outside its authorization for operation in the U.S. In the description include what controls and/or agreements are in place with providers of third-party functionality to ensure the devices underlying RF parameters are unchanged and how the manufacturer verifies the functionality. 3. For Certified Transmitter modular devices, describe how the module grantee ensures that host manufacturers fully comply with these software security requirements for U-

NII devices. If the module is controlled through driver software loaded in the host, describe how the drivers are controlled and managed such that the modular transmitter RF parameters are not modified outside the grant of authorization. Not applicable, this device is not a module. SOFTWARE CONFIGURATION DESCRIPTION GUIDE USER CONFIGURATION GUIDE1 1. Describe the user configurations permitted through the UI. If different levels of access are permitted for professional installers, system integrators or end-users, describe the differences. a) What parameters are viewable and configurable by different parties?

The device only support owner through the UI, it can do the normal configuration, but it is not accessible to change the RF parameters Parameters which are related to RF characteristics and compliance are not accessible to users. 1 This section is required for devices which have a User Interfaces (UI) to configure the device in a manner that may impact the operational parameter. Supporting information is required in the operational description. The operational description must address if the device supports any of the country code configurations or peer-peer mode communications discussed in KDB 594280 Publication D01. SOFTWARE CONFIGURATION DESCRIPTION GUIDE USER CONFIGURATION GUIDE1 b) What parameters are accessible or This device is not subject to professional installation. modifiable by the professional installer or system integrators?

i) Are the parameters in some way limited, No. so that the installers will not enter parameters that exceed those authorized?

ii) What controls exist that the user cannot operate the device outside its authorization in the U.S.?

c) What parameters are accessible or modifiable by the end-user?

i) Are the parameters in some way limited, so that the user or installers will not enter parameters that exceed those authorized?

ii) What controls exist so that the user cannot operate the device outside its authorization in the U.S.?

d) Is the country code factory set? Can it be changed in the UI?

i) If it can be changed, what controls exist to ensure that the device can only operate within its authorization in the U.S.?

e) What are the default parameters when the device is restarted?

2. Can the radio be configured in bridge or mesh mode? If yes, an attestation may be required. Further information is available in KDB Publication 905462 D02. 3. For a device that can be configured as a master and client (with active or passive scanning), if this is user configurable, describe what controls exist, within the UI, to ensure compliance for each mode. If the device acts as a master in some bands and client in others, how is this configured to ensure compliance?

Not applicable, end user has no chance to access parameters. The parameters related to RF operation and compliance are not accessible to end users No. The parameters related to RF operation and compliance are not accessible to end users No, country code is set by software firmware, it can be changed only by software firmware update, it cant be changed by UI. country code is set by software firmware, it can be changed only by software firmware update through TCL the parameters used and reported in the equipment authorization No, Not configured. No, Not supported. 4. For a device that can be configured as The DUT Not support use different types of antennas, different types of access points, such as point-to-point or point-to-multipoint, and use different types of antennas, describe what controls exist to ensure compliance with applicable limits and the proper antenna is used for each mode of operation. (See Section 15.407(a)) KDB 594280 D02 U-NII Device Security v01r01 Information Page 3 of 3