Quick Start Guide CJB1B3A01AAB www.sar-tick.com This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found in the Radio Waves section of this user guide. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 10 mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not surfing internet. Safety and use We recommend that you read this chapter carefully before using this device. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use of this device or of use contrary to the instructions contained herein. Do not switch on your device when its use is prohibited or when using the device may cause interference or danger. Follow rules or regulations in hospitals and health care facilities. Switch off your device near medical apparatus. 2 Switch off your device in an aircraft. The device may cause interference to aircraft control signals. Switch off your device near high-precision electronic devices. The device may affect the performance of these devices. Do not attempt to disassemble your device or its accessories. Only qualified personnel are allowed to service or repair the device. Do not place your device or its accessories in containers with a strong electromagnetic field. Do not place magnetic storage media near your device. Radiation from the device may erase the information stored on them. Do not subject your device to high temperatures or use it in a place with flammable gas such as a petrol station. Keep your device and its accessories away from children. Do not allow children to use your device without guidance. Only use approved batteries and chargers to avoid the risk of explosion. Observe the laws or regulations on device use. Respect others privacy and legal rights when using your device. It is recommended that the equipment only be used in an environment where the temperature is between -10C and 50C and humidity is between 10% to 90%. 3 the CHARGERS Mains powered chargers will operate within temperature range of: 0C to 40C. The chargers designed for your device meet with the standard for safety of information technology equipment and office equipment use. They are also compliant to the ecodesign directive 2009/125/EC. Due to different applicable electrical specifications, a charger you purchased in one jurisdiction may not work in another jurisdiction. They should be used for this purpose only. 1. Overview Y859 is a portable wireless router, providing a simple way to share 4G with any Wi-Fi embedded device. 1.1 Package contents Y859 USB cable Quick start guide Charger 4 1.2 Application PC PAD Smart phone 1.3 Device overview Number Description Power on/off Key WPS Key 5 Number Description LED light Micro USB Interface Use the devices 2 buttons as follows:
Button Description
Power On/Off
WPS Long press to turn on/off the device Short press to put the LED in either active or sleep mode. Long press to turn on WPS Short press to put the LED in either active or sleep mode 1.4 Turning on the device Step 1: Open back cover from Bottom of right corner, then take out battery and put SIM card as remark. Step 2: Long Press the Power On/Off button. 6 1.5 LED Display The LED display is interpreted as follows:
Network Indicator(Red or Blue LED) Wi-Fi indicator (Blue LED) SMS indicator (Blue LED) Battery indicator (Red or Blue LED) LED description:
Category Icon Display Network Indicator Wi-Fi indicator SMS indicator Battery indicator Light Blue LED when connect to internet or flash when no internet service;
Light Red LED when no Network/no service/no SIM card Light Blue LED when Wi-Fi active Light Blue LED when new message coming or flash when SMS full Light Red LED for low power alarm; Light Blue LED during charging 1.6 Connecting in Wi-Fi mode SSID: locate the SSID information on the sticker on Back Cover. 7 Step 1: Use the Wi-Fi manager on the Wi-Fi embedded device to select network name (SSID).
From a Windows PC: Right-click Wireless network connection on the task bar, and select: View Available Networks. Choose SSID from the list of available networks.
From a Mac computer: Select System Preferences ->
Network -> Airport. Click Advanced to choose SSID from the list of available networks.
From an iOS device: Settings -> Wi-Fi. Choose SSID from the available networks.
From an android device: Settings -> Wireless controls ->
Wi-Fi settings. Choose SSID from the available networks. Step 2: Enter the Wi-Fi key when prompted for a security key. 2. Quick Setup 2.1 Website Open your browser and enter http://192.168.1.1 to access the login page. Default login password: admin Login and click Setting to configure the basic settings. Admin Password:
Login Password: Set the password for login. Wi-Fi Settings:
SSID: Set the network name of this device. 8
Security: Configure the security mode connection. for Wi-Fi 2.2 LINK APP Download the LINK APP by scanning the QR code on App Leaflet. Open the LINK app by entering the password. The default password is: admin Set the Wi-Fi network name & Wi-Fi password. Save the settings & restart network connection. 3. Charging the device You have two ways to charge your device. Wall Charger charging:
Connect USB cable with Charger head and device, then charging begin. When the device is powered off, charging will take a maximum of 3 hours. USB Charger charging You can also charge the device by connecting it to a PC with the USB cable. When the device is powered off, charging will take a maximum of 4 hours. Note: In order to protect the battery, when low power LED indicator flash, please charge the device. 9 4. Certification This symbol on device means that these products must be taken to collection points at the end of their life:
- Municipal waste disposal centres with specific bins for these items of equipment.
- Collection bins at points of sale. They will then be recycled, preventing substances being disposed of in the environment, so that their components can be reused. In European Union countries:
These collection points are accessible free of charge. All products with this sign must be brought to these collection points. In non European Union jurisdictions:
Items of equipment with this symbol are not to be thrown into ordinary bins if your jurisdiction or your region has suitable recycling and collection facilities; instead they are to be taken to collection points for them to be recycled. Radio Waves Federal Communications Commission Notice (United States) The SAR limit set by public authorities such as the Federal Communications Commission of the US Government
(FCC), or by Industry Canada, is 1.6 W/kg averaged over 1 gram of body tissue. The highest tested SAR value for this device compliance against the standard is 0.56 W/kg. Although the SAR is determined at the highest certified power level, the actual SAR Level of the modem while 10 operating can be well below the maximum value. This is because the modem is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output of the modem. While there may be differences between SAR levels of various modems and at various positions, they all meet the government requirement for RF exposure. The modem meets FCC RF exposure guidelines provided that it is used with this device at least 10mm from the body. The World Health Organization (WHO) considers that present scientific information does not indicate the need for any special precautions for use of modem. If individuals are concerned, they might choose to limit their own or their childrens RF exposure by limiting the length of use to keep data card away from the head and body. (fact sheet n193) Additional WHO information about electromagnetic fields and public health are available on the following website: http://www.who.int/peh-emf. This device has been tested and found to comply with the limits for a Class B digital , pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be 11 determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC RF Exposure Information (SAR):
This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this is set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage near the body with the separation of 10 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. 12 The exposure standard for wireless s employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. For more information you can go to www.alcatelonetouch.com;
Additional information about electromagnetic fields and public health are available on the following site:
http://www.who.int/peh-emf This device is equipped with a built-in antenna. For optimal operation, you should avoid touching it or degrading it. Licenses The Wi-Fi Logo is a certification mark of the Wi-Fi Alliance. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 13 Warranty The device is warranted against any deviation from technical specifications for a period of twelve (12) (1) months from the date specified on your original invoice. Under the terms of this warranty, you must immediately inform your vendor in case of a conformity defect on this device, and present a proof of purchase. The vendor or repair center will decide whether to replace or repair this device, as appropriate. Repaired or replaced this device is warranted ONE (1) month unless there are statutory provisions to the contrary. This warranty shall not apply to damage or defects to this device due to:
1) Not following the instructions for use or installation, 2) Not being compliant with technical and safety standards applicable in the geographical area where this device is used, 3) Improper maintenance of sources of energy, and of the overall electric installation, 4) Accidents or consequences of theft of the vehicle in which this device is transported, acts of vandalism, lightning, fire, humidity, infiltration of liquids, inclement weather, 5) Connecting to or integrating into this device any equipment not supplied or not recommended by the manufacturer, 6) Any servicing, modification or repair performed by individuals not authorised by the manufacturer, the vendor or the approved maintenance centre,
(1) The warranty period may vary depending on your country. 14 7) Use of this device for a purpose other than that for which it was designed, 8) Malfunctions caused by external causes (e.g., radio interference from other equipment, power voltage fluctuations), 9) Faulty connections resulting from unsatisfactory radio transmission or caused by the absence of radio relay coverage. Warranty is also excluded for this device on which markings or serial numbers have been removed or altered. This device is also warranted against hidden defects (defects inherent in the design, manufacture, etc.). There are no other express warranties than this printed limited warranty, expressed or implied, of any nature whatsoever. In no event shall the manufacturer be liable for incidental or consequential damages of any nature whatsoever, including but not limited to trading loss, commercial loss, to the full extent those damages can be disclaimed by law. Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. Alcatel is a trademark of Alcatel-Lucent used under license by TCL Communication LTD. All rights reserved 2014-2016 TCL Communication LTD. Address: Room 1910-12A, Tower 3, China HK City, 33 Canton Road, Tsimshatsui, Kowloon, Hong Kong 15 LINK APP Freely download the App that helps you remotely control LINK mobile WiFi Android version iOS version Note: LINK APP and Web UI share same password. Default password is: admin LINK APP Freely download the App that helps you remotely control LINK mobile WiFi 1 Make sure your device is connected to the Net 2 Scan the QR Code 3 Download the LINK APP from App Store 4 Click on LINK APP icon to log on to the management page SM or Google Play store Alcatel name is a trademark of Alcatel-Lucent used under license by TCL Communication Ltd. Onetouch is a trademark or registered trademark of TCL Communication Ltd. App Store is a trademarks of Apple Inc. Google Play is a trademark of Google Inc. CJE000022AAB The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types Y859ND (FCC ID: 2ACCJB035) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when properly worn on the body is 1.1W/kg. Simultaneous RF exposure is 1.388W/Kg.