FCC ID: 2ACCJB129 Tablet PC

Quick Start Guide Safety and Regulatory Information CJB1UM0TBAAA CQF1UM0TBAAA BC 1 Safety and Use We recommend that you read this chapter carefully before using your mobile device. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. Use of connected devices subject to T-Mobiles Terms and Conditions. Traffic Safety Always obey the local laws and regulations addressing the use of wireless mobile devices and their accessories in the areas where you drive. The use of mobile devices while driving may be prohibited or restricted in certain areas. Conditions of Use You are advised to switch off your mobile device from time to time to optimize its performance. Operational Warnings: Only use your mobile device in accordance with local laws and regulations and obey all posted notices in public areas. Do not attempt to disassemble your mobile device. If you disassemble your mobile device, the warranty will not apply. Always handle your mobile device with care and keep it in a clean and dust-free place. Do not allow your mobile device to be exposed to adverse weather or environmental conditions (moisture, humidity, rain, infiltration of liquids, dust, sea air, etc.). The manufacturers recommended operating temperature range is 0C (32F) to

+40C (104F) 2 Use only batteries, battery chargers, and accessories which are recommended by Device manufacturer and its affiliates and are compatible with your mobile device model. Device manufacturer and its affiliates disclaim any liability for damage caused by the use of other chargers or batteries. Please check local laws and regulations in your jurisdiction to learn how to best dispose of your mobile device. PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. Privacy Please note that you must respect the laws and regulations of your jurisdiction or other jurisdiction(s) where you will use your mobile device regarding taking photographs and recording sounds with your mobile device. Pursuant to such laws and regulations, it may be strictly forbidden to take photographs and/or to record the voices of other people or any of their personal attributes, and reproduce or distribute them, as this may be considered to be an invasion of privacy. It is the users sole responsibility to ensure that prior authorization be obtained, if necessary, in order to record private or confidential conversations or take a photograph of another person; the manufacturer, the seller or vendor of your mobile device (including the operator) disclaim any liability which may result from the improper use of the mobile device. 3 Legal Information In order to provide you with better access to this important information, we've made the materials accessible from the tablet's Settings menu. Review these materials prior to using your mobile device. To access the materials on your mobile device, swipe up from the home screen, and tap Settings >

About tablet > Legal information, and select a topic. Regulatory Information (e-label) Your mobile device uses an electronic label (e-label) that provides regulatory information about your device. To view the regulatory information (such as FCC ID) for this device, on the device, swipe up from the home screen, then tap Settings >

About tablet > Regulatory & safety. FCC Compliance Any changes or modifications not expressly approved by the party responsible for compliance of this device voids the user's authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference

(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 4 reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician receiver. for help. 5 Your device includes a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for Radio Frequency (RF) set by the Federal Communications Commission (FCC). The RF exposure limits set by the FCC for wireless mobile devices utilize a unit of measurement referred to as Specific Absorption Rate (SAR), which is a measure of the amount of RF energy absorbed by the body when using a mobile device. The FCC requires mobile device manufacturers to ensure that their mobile devices comply with these objective limits for safe exposure. The FCC SAR limit incorporates a substantial margin of safety to give additional protection to the public and to account for any variations in measurements. The FCC limit for public exposure from cellular devices is a SAR level of 16 watts per kilogram

(1.6 W/kg). Tests for SAR are conducted using standard operating positions with the mobile device transmitting at its highest certified power level in all tested frequency bands. SAR information for this device can be found on the FCC website at www.fcc.gov/oet/ea/. Follow the instructions on the website to use the FCC ID for this device to find SAR values for the device. To view additional SAR information on your tablet, swipe up from the Home screen > Settings > About tablet > Legal information > RF Exposure. 6 Battery and Accessories Observe the following precautions for battery use:

Do not attempt to open the battery (due to the risk of toxic fumes and burns). a battery. Do not puncture, disassemble or cause a short-circuit in Do not burn or dispose of a used battery in household rubbish or store it at temperatures above 60C. Do not disassemble or open crush, bend or deform, puncture or shred. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard Products that have the below symbol must be taken to collection points at the end of their life:

Municipal waste disposal centers with specific bins for these items of equipment. Collection bins at points of sale. You can learn more about how to recycle your mobile device by visiting the CTIA website at www.ctia.org/news/how-to-

recycle-your-mobile-device CAUTION: IF BATTERY IS REPLACED BY AN INCORRECT TYPE, DEVICE MIGHT EXPLODE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTION. WARNING: Cancer and Reproductive Harm -

www.P65Warnings.ca.gov 7 Chargers Licenses Home A.C./Travel chargers will operate within the temperature range of: 0C (32F) to 40C (104F). The chargers designed for your mobile device meet with the standard for safety of information technology equipment and office equipment use. Due to different applicable electrical specifications, a charger you purchased in one jurisdiction may not work in another jurisdiction. microSD logo is a trademark of SD-3C, LLC. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Device Manufacturer and its affiliates is under license. Other trademarks and trade names are those of their respective owners. The Wi-Fi Logo is a certification mark of the Wi-Fi Alliance. Recycling Information Call Recycle Customer Support at 1-855-368-0829 for recycling instructions. 8

Quick Start Guide CJB1UM0TBAAA At a glance Lets get started. Well guide you through startup and tell you where to find more information about your tablet and its great features. USB Type-C Headset connector IR sensor Microphone Front camera SIM and microSDTM tray Volume keys Power key Speaker 1 Set up your SIM card The SIM (Subscriber Identity Module) card identifies your device to the wireless network. You don't need to power off your device before inserting or removing the SIM card. Note: Your device only supports Nano SIM cards. To avoid damage to your device, do not attempt to insert any other SIM types. Insert the SIM pin thats provided to eject the SIM tray and then slide it out gently. Place or remove the Nano SIM card and the microSDTM card in the correct slot as shown. Note: SIM pin is included in the box. microSDTM cards are sold separately. 2 Battery Charging the device To optimize battery performance, be sure to fully charge your device before using it for the first time. 1. Insert the USB Type-C cable into the charge port as shown. 2. Connect charger to power outlet. Note: Please use the charger and USB Type-C cable that came with your device. Using the wrong cable and charger may damage the charging port or reduce battery performance. Optimize Battery Life To optimize battery life, adjust your screen brightness and display timeout. 1. Adjusting brightness level: Lowering your screen brightness level can optimize your battery level. To adjust the brightness level, Swipe up from the Home

> Display > Brightness screen, touch Settings level. To lower the brightness level, move the wheel to the left. 2. Power saving mode: Power saving mode minimizes 3 battery usage to extend battery life. To explore power management options, Swipe up from the Home screen

> Battery > Battery Saver. Then touch Settings touch TURN ON NOW to activate power saving mode. 3 Adjust screen timeout: Sleep mode is low power mode function and it significantly saves your battery power. Lower the amount of time your device stays on after you stop using it to optimize your battery level. To do so, Swipe up from the Home screen, touch Settings

> Display > Advanced > Screen timeout and select screen timeout duration. Security & convenience To secure your tablet from being used by others without your permission, activate the following security options:

Screen lock: Swipe up from the Home screen and touch Settings

> Security > Screen lock. 4 Useful apps When youre up and running, try these apps to see what you can do with your new tablet. Find it: Swipe up from the home screen to see all your apps. Camera Your tablet is equipped with a camera and a camcorder for taking photos and shooting videos. Chrome Using the Chrome browser, you can enjoy surfing the Web. Gmail With Gmail, you can send and receive emails, manage emails by labels, archive them, etc. Messaging (1) You can create, edit, and receive SMS and MMS with this tablet. Play Store In Play Store, search for the app you need, download it and then follow the installation guide to install the app. Settings To access this function, swipe up from the Home screen and then touch Settings. Note: Software updates happen frequently, so your tablet may not have all the listed apps or features.

(1) The app may differ depending on your carrier 5 Approved firmware versions This device will only operate with firmware versions that have been approved for use by your wireless carrier and the device manufacturer. If unauthorized firmware is placed on the device it will not function. Information about safeguarding handsets We encourage customers to take appropriate measures to secure their devices and invites them to take advantage of the features available on this device to help secure it from theft and/or other unauthorized access and use. This device has a locking function (e.g., Security PINs) that can serve as a first line of defense against unauthorized use or access to stored information. Preloaded security applications that allow customers to track or locate misplaced devices can be found on several devices. Lost or stolen devices should be immediately reported to your wireless carrier so that proper measures can be taken to protect accounts. For additional information, visit your wireless carriers Privacy Policy. Additional information Use of some content or features may require qualifying service, or access to a Wi-Fi connection. 6 Alcatel is a trademark of Nokia used under license by TCL Communication Technology Holdings Limited. JOY TAB is a trademark of TCL Communication Technology Holdings Limited. 2020 TCT Mobile Limited. All rights reserved. TCL Communication Technology Holdings Limited reserves the right to alter material or technical specification without prior notice. Printed in China

239 AOO Regulatory & safety 9032W Manufacturer name TCL Communication Ltd IMEI 015773000000385 CU reference 9032W-2ATBUS7 Bluetooth Declaration ID Bluetooth Declaration ID D050974

+H 3%

For more details on the following icons, please refer to the product user manual bd B S FCC ID:2ACCJB129

Date 2020-08-03 To: Federal Communications Commission, Authorization & Evaluation Division, 7345 Oakland Mills Road Columbia, MD 21046 And American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

CTTL-Terminals Test Lab of China Academy of Telecommunication Research of MIIT is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Regards, Zhizhou GONG Product Certification Manager TCL Communication Ltd. TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Tel: +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com

2020-08-03 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: 2ACCJB129 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application:

- Block Diagram

- Schematics

- Operational Description

- BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, Zhizhou GONG Product Certification Manager TCL Communication Ltd. TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Tel: +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com

2020-08-03 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: SHORT-TERM Confidentiality request for FCC ID: 2ACCJB129 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days:

- External Photos

- Internal Photos

- Test Setup Photos

- User manual The applicant also acknowledges that they will also provide appropriate notice to ACB should either of the following occur:

a) if the applicant requires additional 45 days extension periods they will notify ACB with a new request letter at least 7 days prior to the short-term confidentiality expiration date [Note: up to a maximum of 3 extensions only are allowed], or b) Immediately notify ACB in the event the information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Yours Sincerely, Zhizhou GONG Product Certification Manager TCL Communication Ltd. TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Tel: +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com

Companys Letterhead DFS Client Declaration Letter Date:

We have declared below featured for device, FCC ID: 2ACCJB129

(1) DFS Device Master Client with Radar detection capability Client without radar detection capability

(2) Active / Passive Scanning, ad hoc mode access point capability Frequency Band (MHz) Scanning Plan Ad Hoc Mode Capability Access point Capability WiFi Direct Group Owner WiFi Direct Group Client 2412 - 2462 Active 5180 5240 Active 5260 5320 Passive 5500 5580 Passive 5660 5700 Passive Yes Yes No No No Yes Yes No No No Yes Yes No No No Yes Yes Yes Yes Yes Yes Yes 5745 - 5825 Active

(3) Country code selection capability to end user-

If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection) Yes, No Yes Yes

(4) Transmission in 5600 MHz to 5650 MHz is notched -

Yes, No Yes, No

(5) Meet Part 15.202 requirement -

A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices. A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(6) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply, Not Apply, (If apply, please help to provide explanation on it was implement, and how software was controlled). V1.0 Companys Letterhead Signature ____________________________ Printed Name:

Position:

Company:

V1.0