FCC ID: 2ACCJB150 Tablet PC

Quick Start Guide CJB1XJ001AAA English-CJB1XJ001AAA Printed in China 1 Appearance 2 1 5 6 3 4 7 8 9 Number Function 1 2 Power key: Hold down until the tablet powers on. Hold down until options appear, then select power off. Volume key Speaker 3 4 5 6 Microphone 7 8 9 USB port Headset SD slot 1 2 Insert SD card 3 Charging 2 4 Home screen 1 2 Back Home Recent apps Name Function Google Search Touch 1 to enter text search screen. Touch 2 to enter voice search screen. Back Home Touch to go back to last screen. Touch to return to the Home screen Recent apps Touch to view recent apps. All Apps Swipe upward from the Home screen to view the App list. 3 5 Kidomi To use Kidomi:

1. When you configur the setup wizard in the device for the first time, The Kidomi login screen will appear, If you are already connected to a Wi-Fi network, you can continue. Otherwise, you need to pull down the status bar twice to find Setting icon, and then connect to a Wi-Fi network.

(Refer to section "7 Getting connected"

Settings 2. From Kidomi login screen, Touch Get started to create an account or touch Sign in to access your account. 3. Customize your kids playlist by selecting your childs categories of interest and age range. 4. Enter your kids first name and then set up a PIN for yourself. 5. After completing the setup. your kids can use the device while in the Kidomi learning and gaming environment. 6. To access the parent area press the menu key located at the top right of the home screen. Here you can access parent features and exit Kidomi by entering your PIN code. Please note: If there is network exception when you are in kidomi application, you need to exit kidomi to reconnect network 4 6 Stand 7 Getting connected To connect to the Internet with this device, you will need to have an internet connection via Wi-Fi. To turn Wi-Fi on and connect to a Wi-Fi network Go to Settings > Network & Internet > Wi-Fi. Touch a Wi-Fi network to connect. If the network you selected is a secured network, you will need to enter a password or other credentials. When finished, touch CONNECT. 5 8 Eye Comfort Mode Eye comfort mode: Decreases the level of blue light emitted from the screen to make viewing more comfortable for your eyes. Your device is compliant with the TV Rheinland's Low Blue Light Content standard when the Eye comfort mode is turned on. To turn Eye comfort mode on:

From the Home screen, touch Settings > Display > Eye comfort mode. Touch TURN ON NOW, then slide the icon left or right to increase/decrease the level of the blue light. Or From the Home screen, twice drag down the Status bar to open the Quick Settings panel, Slide the Quick Settings panel screen left to find Eye comfort mode. Touch Eye comfort mode to turn it on. To protect your eyes:

Break time Users should take some time away from the screen. It is recommended to take short breaks 5 mins after half of one hour. Looking at Distant Objects Users often blink less when in front of monitor screen. To minimize eye strain and dryness, users should rest the eye periodically by focusing on objects that are far away. Eye and Neck Exercises Certain exercise reduces eye strain and prevent early onset of musculo-skeletal disorders. Exercises for the eye:

1. Alternate looking up and looking down while keeping the body and head upright. 2. Slowly roll your eyes to look to the left and right. 3. Roll eyes to look at objects on the upper right corner and then on lower right. Do same thing to look at objects on the upper left and lower left. 6

Safety and Precautions This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found on Radio waves section. www.sar-tick.com PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. EN-12 Safety and use We recommend that you read this chapter carefully before using your device. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. TRAFFIC SAFETY:

Given that studies show that using a device while driving a vehicle constitutes a real risk, drivers are requested to refrain from using their device when the vehicle is not parked. Check the laws and regulations on the use of wireless devices and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. CONDITIONS OF USE:

You are advised to switch off the device from time to time to optimize its performance;

Remember to abide by local authority rules of mobile device use on aircrafts;

If your device is a unibody device, where the back cover and battery are not removable, dissembling the device will void your warranty. Disassembling the device can cause bodily injury if the battery is punctured;

Always handle your device with care and keep it in a clean and dust-free place;

Do not allow your device to be exposed to adverse weather or environmental conditions, such as moisture, humidity, rain, infiltration of liquids, dust, sea air, etc. The manufacturers recommended operating temperature range is 0C (32F) to +40C (104F). At over 40C (104F), the legibility of the devices display may be impaired, though this is temporary and not serious;

Do not open, dismantle, or attempt to repair your device yourself;

Do not drop, throw, or bend your device;

Use only batteries, battery chargers, and accessories which are recommended by TCL Communication Ltd. and its affiliates and are compatible with your device model. TCL Communication Ltd. and its affiliates disclaim any liability for damage caused by the use of other chargers or batteries;

EN-13 Your device should not be disposed of in a municipal waste. Please check local regulations for disposal of electronic products;

Remember to make backup copies or keep a written record of all important information stored on your device;

Some people may suffer epileptic seizures or blackouts when exposed to flashing lights, or when playing video games. These seizures or blackouts may occur even if a person never had a previous seizure or blackout. If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult your doctor before playing video games on your device or enabling a flashing-lights feature on your device;

Parents should monitor their childrens use of video games or other features that incorporate flashing lights on the devices. All persons should discontinue use and consult a doctor if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, orientation, or movements. PRIVACY:

Please note that you must respect the laws and regulations in force in your jurisdiction or other jurisdiction(s) where you will use your device regarding taking photographs and recording sounds with your device. Pursuant to such laws and regulations, it may be strictly forbidden to take photographs and/or to record the voices of other people or any of their personal attributes, and reproduce or distribute them, as this may be considered to be an invasion of privacy. It is the user's sole responsibility to ensure that prior authorization has been obtained, if necessary, in order to record private or confidential conversations or take a photograph of another person; the manufacturer, the seller or vendor of your device (including the carrier) disclaim any liability which may result from improper use of the device. BATTERY:

For a non-unibody device:

Observe the following precautions:

Do not attempt to open the battery (due to the risk of toxic fumes and burns);

Do not puncture, disassemble, or cause a short circuit in a battery;

Do not burn or dispose of a used battery in household rubbish or store it at temperatures above 60C (140F). EN-14 Batteries must be disposed of in accordance with locally applicable environmental regulations. Only use the battery for the purpose for which it was designed. Never use damaged batteries or those not recommended by TCL Communication Ltd. and/or its affiliates. For a non-unibody device with a non-removable battery:

Observe the following precautions:

Do not attempt to eject, replace or open the battery;

Do not puncture, disassemble, or cause a short circuit in the battery;

Do not burn or dispose of your device in household rubbish or store it at temperature above 60C (140F). Device and battery must be disposed of in accordance with locally applicable environmental regulations. For a unibody device:

Observe the following precautions:

Do not attempt to open the back cover;

Do not attempt to eject, replace, or open battery;

Do not puncture the back cover of your device;

Do not burn or dispose of your device in household rubbish or store it at temperature above 60C (140F);

Device and battery as a unibody device must be disposed of in accordance with locally applicable environmental regulations. This symbol on your device, the battery, and the accessories means that these products must be taken to collection points at the end of their life:

Municipal waste disposal centers with specific bins for these items of equipment;

Collection bins at points of sale. They will then be recycled, preventing substances being disposed of in the environment, so that their components can be reused. In European Union countries:

These collection points are accessible free of charge. EN-15 All products with this sign must be brought to these collection points. In non-European Union jurisdictions:

Items of equipment with this symbol are not to be thrown into ordinary bins if your jurisdiction or your region has suitable recycling and collection facilities; instead they are to be taken to collection points for them to be recycled. In the United States you may learn more about CTIAs Recycling Program at http://www.gowirelessgogreen.org/

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. CHARGERS:

Home A.C./Travel chargers will operate within the temperature range of: 0C (32F) to 40C (104F). The chargers designed for your device meet the standard for safety of information technology equipment and office equipment use. Due to different applicable electrical specifications, a charger you purchased in one jurisdiction may not work in another jurisdiction. They should be used for this purpose only. Characteristics of power supply (depending on the country):

Travel charger: Input: 100-240 V, 50/60 Hz, 0.2A Battery:

Output: 5V, 1A Lithium 2580 mAh EN-16 Radio waves Proof of compliance with international standards (ICNIRP) or with European Directive 2014/53/EU (RED) is required of all device models before they can be put on the market. The protection of the health and safety for the user and any other person is an essential requirement of these standards or this directive. THIS DEVICE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio-frequency (RF) energy. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. These guidelines include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health. The exposure standard for devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by public authorities such as the Federal Communications Commission of the US Government (FCC), or by Innovation, Science and Economic Development Canada (ISED), is 1.6 W/kg averaged over 1 gram of body tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/

oet/ea/fccid after searching on FCC ID: 2ACCJB150 Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output of the device. Before a device model is available for sale to the public, compliance with national regulations and standards must be shown. The highest SAR value for this model device when tested is 0.42 W/Kg for use close to the body. EN-17 While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement for RF exposure. Additional information on SAR can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site: http://www.ctia.org/

Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. For the receiver devices associated with the operation of a licensed radio service, they bear the following statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference;

This device must accept any interference received, including interference that may cause undesired operation. Your device is equipped with a built-in antenna. For optimal operation, you should avoid touching it or degrading it. As mobile devices offer a range of functions, they can be used in positions other than against your ear. In such circumstances the device will be compliant with the guidelines when used with a headset or USB data cable. EN-18 Please note by using the device some of your personal data may be shared with the main device. It is under your own responsibility to protect your own personal data, not to share with it with any unauthorized devices or third party devices connected to yours. For products with Wi-Fi features, only connect to trusted Wi-Fi networks. These precautions will help prevent unauthorized access to your device. Your product can store personal information in various locations including a memory card, and built-in memory. Be sure to remove or clear all personal information before you recycle, return, or give away your product. Choose your apps and updates carefully, and install from trusted sources only. Some apps can impact your products performance and/or have access to private information including account details, call data, location details and network resources. Note that any data shared with TCL Communication Ltd. is stored in accordance with applicable data protection legislation. For these purposes TCL Communication Ltd. implements and maintains appropriate technical and organizational measures to protect all personal data, for example against unauthorized or unlawful processing and accidental loss or destruction of or damage to such personal data whereby the measures shall provide a level of security that is appropriate having regard to The technical possibilities available;

The costs for implementing the measures;

The risks involved with the processing of the personal data, and;

The sensitivity of the personal data processed. You can access, review and edit your personal information at any time by logging into your user account, visiting your user profile or by contacting us directly. Should you require us to edit or delete your personal data, we may ask you to provide us with evidence of your identity before we can act on your request. EN-19 Licenses microSD logo is a trademark. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TCL Communication Ltd. and its affiliates is under licence. Other trademarks and trade names are those of their respective owners. Alcatel 9317X/9317G Bluetooth Declaration ID D047838 The Wi-Fi Logo is a certification mark of the Wi-Fi Alliance. Google, the Google logo, Android, the Android logo, Google Search TM, Google Maps TM, Gmail TM, YouTube, Google Play Store, Google Latitude TM, and Hangouts TM are trademarks of Google Inc. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License (the text will show when you touch Google legal in Settings > About tablet > Legal information) (1). You have purchased a product which uses the open source (http://opensource.org/) programs mtd, msdosfs, netfilter/iptables and initrd in object code and other open source programs licensed under the GNU General Public Licence and Apache Licence. We will provide you with a complete copy of the corresponding source codes upon request within a period of three years from the distribution of the product by TCL Communication Ltd. You may download the source codes from http://sourceforge.net/projects/alcatel/files/. The provision of the source code is free of charge from the internet.

(1) May not be available in all countries. EN-20 General information Internet address: wwwalcatelmobilecom Hotline: See the "SERVICES" leaflet that came with your device or go to our website Manufacturer: TCL Communication Ltd Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Electronic labeling path: Touch Settings > System > Regulatory & safety to find more information about labeling (1), such as FCC ID On our website, you will find our FAQ (Frequently Asked Questions) section. You can also contact us by email to ask any questions you may have. Disclaimer There may be certain differences between the user manual description and the devices operation, depending on the software release of your device or specific carrier services. TCL Communication Ltd. shall not be held legally responsible for such differences, if any, nor for their potential consequences, which responsibility shall be borne by the carrier exclusively. Warranty Your device is warranted against any defect or malfunctioning which may occur in conditions of normal use during the warranty period of twelve (12) months(1) from the date of purchase as shown on your original invoice. Batteries(2) and accessories sold with your device are also warranted against any defect which may occur during the first six (6) months(1) from the

(1) The warranty period may vary depending on your country.

(2) The life of a rechargeable device battery in terms of conversation time, standby time and total service life, will depend on the conditions of use and network configuration. Batteries being considered expendable supplies, the specifications state that you should obtain optimal performance for your device during the first six months after purchase and for approximately 200 more recharges. EN-21 date of purchase as shown on your original invoice. In case of any defect of your device which prevents you from normal use thereof, you must immediately inform your vendor and present your device with your proof of purchase. If the defect is confirmed, your device or part thereof will be either replaced or repaired, as appropriate. Repaired device and accessories are entitled to a one (1) month warranty for the same defect. Repair or replacement may be carried out using reconditioned components offering equivalent functionality. This warranty covers the cost of parts and labor but excludes any other costs. This warranty shall not apply to defects to your device and/or accessory due to (without any limitation):

- Non-compliance with the instructions for use or installation, or with technical and safety standards applicable in the geographical area where your device is used;

- Connection to any equipment not supplied or not recommended by TCL Communication Ltd.;

- Modification or repair performed by individuals not authorised by TCL Communication Ltd. or its affiliates or your vendor;

- Modification, adjustment or alteration of software or hardware performed by individuals not authorised by TCL Communication Ltd.;

- Inclement weather, lightning, fire, humidity, infiltration of liquids or foods, chemical products, download of files, crash, high voltage, corrosion, oxidation There are no express warranties, whether written, oral or implied, other than this printed limited warranty or the mandatory warranty provided by your country or jurisdiction. In no event shall TCL Communication Ltd. or any of its affiliates be liable for indirect, incidental or consequential damages of any nature whatsoever, including but not limited to commercial or financial loss or damage, loss of data or loss of image to the full extent those damages can be disclaimed by law. Some countries/states do not allow the exclusion or limitation of indirect, incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. EN-22

Phoenix 7 Commercial Sticker and CU Sticker ABSTRACT:

The purpose of this document is to define all the information on commercial sticker and CU sticker for Phoenix 7 HISTORY Date 2021/2/3 12:09:51 2021/3/22 14:58:42 Version v01 v02 Comments Creation of the document (draft file) Update FCC ID and BT informaton Name minglu.zho ng Band Cu Ref Prefix TACFAC MEID Certification CE Certification FCC 9317X 9317X 9317X1 9317X1

SN MAC address

(12 bytes)+3 bytes random code MAC address

(12 bytes)+3 bytes random code MAC address

(12 bytes)+3 bytes random code MAC address

(12 bytes)+3 bytes random code CE CE

3C

Bluetooth QD ID Bluetooth Declaration ID D047838 FCC ID:2ACCJB150 Bluetooth Declaration ID D047838 Bluetooth Declaration ID D047838 FCC ID:2ACCJB150 Bluetooth Declaration ID D047838

1.COMMERCIAL LABEL MARKING (IMEI sticker) 1.1 Printing Zone definition (CPE000268AC0--------For general 3815+111.5+271.5 mm) Remark soft techn. Release Signification Bluetooth DID PTS PTM Model Address Made in Manufacturer IMEI No. / INDUS. REF. / PTH(PTM) / PTS / CU REF. 1.2 Samples for Commercial Label address DATAMATRIX Code CU Ref. SN Text Company Date SN Barcode 9317X-2AALEU0 IMEI Sample V02 9317X-2AALMX0 IMEI Sample V02 FCC ID 9317X1-2AALEU0 IMEI Sample V02 9317X1-2AALMX0 IMEI Sample V02 FCC ID 2 UNIT BOX LABEL MARKING (CU sticker) 2.1 Printing Zone definition (CPG2190000C0--------9524 mm) 2.2 Blank Label Size Remark Logos Refer to ERP Text+1D Code Signification Importer address Alcatel Log Made In FCC ID Code name CU Ref. CE/NOM Color EAN Code SN Text WEEE SN Barcode 2.3 Samples for CU Label 9317X-2AALEU0 CU Sample V02 9317X-2AALMX0 CU Sample V02FCC ID 9317X1-2AALEU0 CU Sample V02 9317X1-2AALMX0 CU Sample V02FCC ID Appendix 1: Location of PCBA label. PCBA Location is NONE Appendix 2: Location of IMEI label. IMEI label is NONE Appendix 3: Specail Image Specail Image is NONE

Phoenix7_GL_Marking(V0.1a)_20201214 1:1 alcatelLOGO Cool Gray 9C 16mm m m 8

. 5 4 6mm 8mm 4.6mm TP A A 3.2mm 0.1mm 0.12mm Camera Lens: CD Spin Texture Printed Dark Chrome

(Printed on 2nd surface) Frame Mask: Pantone Black C

(Printed on 2nd surface) 0.04MM LOGO Cool Gray 9C 12.5mm 21.9mm 22.7mm

Phoenix 7 KIDS Commercial Sticker and CU Sticker ABSTRACT:

The purpose of this document is to define all the information on commercial sticker and CU sticker for Phoenix 7 KIDS HISTORY Date 2021/2/3 12:14:20 2021/3/22 15:01:53 Version v01 v02 Comments Creation of draft Update FCC ID and BT information Name minglu.zho ng Band Cu Ref Prefix TACFAC MEID Certification CE Certification FCC 9317G 9317G 9317G1 9317G1

SN MAC address

(12 bytes)+3 bytes random code MAC address

(12 bytes)+3 bytes random code MAC address

(12 bytes)+3 bytes random code MAC address

(12 bytes)+3 bytes random code CE CE

3C

Bluetooth QD ID Bluetooth Declaration ID D047838 FCC ID:2ACCJB150 Bluetooth Declaration ID D047838 Bluetooth Declaration ID D047838 FCC ID:2ACCJB150 Bluetooth Declaration ID D047838

1.COMMERCIAL LABEL MARKING (IMEI sticker) 1.1 Printing Zone definition (CPE000268AC0--------For general 3815+111.5+271.5 mm) Remark soft techn. Release Signification Bluetooth DID PTS PTM Logos Model IMEI No. / INDUS. REF. / PTH(PTM) / PTS / CU REF. 1.2 Samples for Commercial Label Address Made in Manufacturer address DATAMATRIX Code FCC ID CU Ref. SN Text Company Date SN Barcode 9317G-2AALEU0 IMEI Sample V02 9317G-2AALMX0 IMEI Sample V02FCC ID 9317G1-2AALEU0 IMEI Sample V02 9317G1-2AALMX0 IMEI Sample V02FCC ID 2 UNIT BOX LABEL MARKING (CU sticker) 2.1 Printing Zone definition (CPG30W0001C0--------5533 mm) 2.2 Blank Label Size Remark Logos Refer to ERP Text+1D Code Signification Importer address Alcatel Log Made In FCC ID Model CU Ref. CE/NOM Color EAN Code SN Text WEEE SN Barcode 2.3 Samples for CU Label 9317G-2AALEU0 CU Sample V02 9317G-2AALMX0 CU Sample V02FCC ID 9317G1-2AALEU0 CU Sample V02 9317G1-2AALMX0 CU Sample V02FCC ID Appendix 1: Location of PCBA label. PCBA Location is NONE Appendix 2: Location of IMEI label. IMEI label is NONE Appendix 3: Specail Image Specail Image is NONE

TCL Communication Ltd. Science Park, Hong Kong, China Tel: 0086-755-36611722 Email: zhizhou.gong@tcl.com Fax: 0086-755-36612000-81722 Date: 2021-04-01 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland21046 9317G/9317X) To Whom It May Concern, Subject: FCC Class II Permissive change for FCC ID: 2ACCJB150 (Model:

This is to request a Class II Permissive change for FCC ID: 2ACCJB50 (Model: 9317G) granted on 2021-03-25 The Major change filed under this application is as below, otherwise are identical. 1. Change model number from 9317G to 9317X for market purpose 2. Deleted P/L sensor ,Not affect the PCB layout Thank you. Sincerely, Name: G o n g Z h i z h o u Title: M a n a g e r Company Name: TCL Communication Ltd. Company address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong

TCL Communication Ltd. Authority to Act as Agent Date: _2021/03/24_ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

______Shenzhen Academy of Information and Communication Technology______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____(Typically 8 12 months)_____ ______Gong Zhizhou_____

(Print name)

(Signature1) ____Project Manager___ By:

Title:

On behalf of: ___TCL Communication Ltd.___ Telephone:

__0086-755-36611722__

(Company Name) 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022818 11 TCL Communication Ltd. Request for Confidentiality Date: _2021/03/24_ Subject: Confidentiality Request for: _____2ACCJB150_____ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *2 Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Tune-Up Procedure Schematics Test Setup Photos Users Manual ______2ACCJB150_____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

(Signature/Title3) _______Gong Zhizhou_______

(Print name) 2 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022818 11

TEL: 0086-755-36611722 FAX: 0086-75536612000-81722 7/F, Block F4, TCL Communication Technology Building, TCL International E City, Zhong Shan Yuan Road, Nanshan District, Shenzhen, Guangdong, P.R. China 518052 Declaration of changes from Initial to Variant General: 9317X is a variant product of 9317G SOFTWARE MODIFICATIONS:

Protocol Stack changes: NO MMS/STK/USAT/USIM changes: NO DM/SUPL/VT/FUMO/SWP/HCI: NO (indicated the changed items if yes) Other changes detailed: mode name change GSM Antenna AP Modem Transceiver Rx SAW Filter ASM HARDWARE MODIFICATIONS:

Band changes: NO PCB Layout changes: NO Main RF components changes: NO UMTS Antenna AP Modem Transceiver NO GSM850 NO GSM900 GSM1800 NO GSM1900 NO UMTS2100 NO UMTS1900 NO NO UMTS900 NO UMTS850 Band 1 Band 3 Band 5 Band 7 Band 8 Band 20 Band 28 Band 38 Band 40 NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO Power Amplifier NO NO NO NO NO NO NO NO NO NO NO NO Power Amplifier NO NO NO NO Tx SAW Filter NO NO NO NO Duple xer NO NO NO NO ASM NO NO NO NO Power Amplifier NO NO NO NO NO NO NO NO NO Tx SAW Filter NO NO NO NO NO NO NO NO NO Rx SAW Filter NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO LTE Antenna AP Modem Transceiver Duplexer ASM NO NO NO NO NO NO NO NO NO Band 41 Antenna AP Modem Transceiver Balun Diplexer Power Amplifie r NO NO NO Band pass filter NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO Bluetooth NO NO Wi-Fi NO GPS FM changes: No LCD/ Speaker/ Camera/ Vibrator changes: (indicated the changed items if yes) No Other changes detailed:

NO NO NO MECHANICAL MODIFICATIONS:

Use new metal front/back cover or keypad: NO Mechanical shell changes: NO Whole size of EUT: NO Distance of Ear reference point to bottom of handset: NO Other trinkets to change the surface of handset: NO Other changes detailed: 9317X remove p/l sensor;

APPROVED BY:

Project Manager:

Signature:

Date: 2021-04-01

Letter head Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: 2021/03/11 Request for Confidentiality Subject:

FCC ID:

2ACCJB150 To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation ANT specification Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are request short-term confidential treatment for the following information until 180 days after the Grant date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

External Photos Internal Photos Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Sincerely yours, ___________________________ Name/Title: Zhizhou Gong / Project Manager Applicant: TCL Communication Ltd. ADDRESS: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong TEL: 0086-755-36611722 Email: zhizhou.gong@tcl.com

TCL Communication Ltd. Authority to Act as Agent Date: _2021/03/11_ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

______Shenzhen Academy of Information and Communication Technology______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____(Typically 8 12 months)_____ By:

(Signature1) ______Gong Zhizhou_____

(Print name) Title:

____Project Manager___ On behalf of: ___TCL Communication Ltd.___

(Company Name) Telephone:

__0086-755-36611722__ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022818 11 TCL Communication Ltd. THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD Request for Confidentiality Date: _2021/03/11_ Subject: Confidentiality Request for: _____2ACCJB150_____ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *2 Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Tune-Up Procedure Schematics Test Setup Photos Users Manual ______TCL Communication Ltd._____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

(Signature/Title3) _______Gong Zhizhou_______

(Print name) 2 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022818 11

TCL Communication Ltd. Email: zhizhou.gong@tcl.com Science Park, Hong Kong, China Tel: 0086-755-36611722 Fax: 0086-755-36612000-81722 Attestation Letter Federal Communications Commission Authorization and Evaluation Division We, TCL Communication Ltd., declare that the device does not support channel 12 ~ 13 in 2.4 GHz band and any non-US channels in all the operational mode(s) for the following product. Date: March 18, 2021 FCC ID: 2ACCJB150 Product: U3A 7 WIFI Refresh Model: 9317G FCC ID: 2ACCJB150 If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

Sincerely, Name: Gong Zhizhou Position: Manager TCL Communication Ltd. V1.0