FCC ID: 2ACCJB176 Tablet PC

Safety and Precautions 9132X SAR This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found on Radio waves section. PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. EN-1 Safety and use We recommend that you read this chapter carefully before using your device. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. TRAFFIC SAFETY:

Given that studies show that using a device while driving a vehicle constitutes a real risk, even when the hands-free kit is used

(car kit, headset...), drivers are requested to refrain from using their device when the vehicle is not parked. Check the laws and regulations on the use of wireless devices and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. CONDITIONS OF USE:

You are advised to switch off the device from time to time to optimize its performance;

Remember to abide by local authority rules of device use on aircrafts;

If your device is a unibody device, where the back cover and battery are not removable, dissembling the device will void your warranty. Disassembling the device can cause bodily injury if the battery is punctured;

Always handle your device with care and keep it in a clean and dust-free place;

Do not allow your device to be exposed to adverse weather or environmental conditions, such as moisture, humidity, rain, infiltration of liquids, dust, sea air, etc. The manufacturers recommended operating temperature range is 0C (32F) to +40C (104F). At over 40C (104F), the legibility of the devices display may be impaired, though this is temporary and not serious;

Do not open, dismantle, or attempt to repair your device yourself;

Do not drop, throw, or bend your device;

Use only batteries, battery chargers, and accessories which are recommended by TCL Communication Ltd. and its affiliates and are compatible with your device model. TCL Communication Ltd. and its affiliates disclaim any liability for damage caused by the use of other chargers or batteries;

Your device should not be disposed of in a municipal waste. Please check local regulations for disposal of electronic products;

Remember to make backup copies or keep a written record of all important information stored on your device;

EN-2 Some people may suffer epileptic seizures or blackouts when exposed to flashing lights, or when playing video games. These seizures or blackouts may occur even if a person never had a previous seizure or blackout. If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult your doctor before playing video games on your device or enabling a flashing-lights feature on your device;

Parents should monitor their childrens use of video games or other features that incorporate flashing lights on the devices. All persons should discontinue use and consult a doctor if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, orientation, or movements. PRIVACY:

Please note that you must respect the laws and regulations in force in your jurisdiction or other jurisdiction(s) where you will use your device regarding taking photographs and recording sounds with your device. Pursuant to such laws and regulations, it may be strictly forbidden to take photographs and/or to record the voices of other people or any of their personal attributes, and reproduce or distribute them, as this may be considered to be an invasion of privacy. It is the user's sole responsibility to ensure that prior authorization has been obtained, if necessary, in order to record private or confidential conversations or take a photograph of another person; the manufacturer, the seller or vendor of your device (including the carrier) disclaim any liability which may result from improper use of the device. BATTERY:

For a non-unibody device:

Observe the following precautions:

Do not attempt to open the battery (due to the risk of toxic fumes and burns);

Do not puncture, disassemble, or cause a short circuit in a battery;

Do not burn or dispose of a used battery in household rubbish or store it at temperatures above 60C (140F). Batteries must be disposed of in accordance with locally applicable environmental regulations. Only use the battery for the purpose for which it was designed. Never use damaged batteries or those not recommended by TCL Communication Ltd. and/

or its affiliates. For a unibody device:

Observe the following precautions:

Do not attempt to open the back cover;

EN-3 Do not attempt to eject, replace, or open battery;

Do not puncture the back cover of your device;

Do not burn or dispose of your device in household rubbish or store it at temperature above 60C (140F);

Device and battery as a unibody device must be disposed of in accordance with locally applicable environmental regulations. This symbol on your device, the battery, and the accessories means that these products must be taken to collection points at the end of their life:

Municipal waste disposal centers with specific bins for these items of equipment;

Collection bins at points of sale. They will then be recycled, preventing substances being disposed of in the environment, so that their components can be reused. In European Union countries:

These collection points are accessible free of charge. All products with this sign must be brought to these collection points. In non-European Union jurisdictions:

Items of equipment with this symbol are not to be thrown into ordinary bins if your jurisdiction or your region has suitable recycling and collection facilities; instead they are to be taken to collection points for them to be recycled. In the United States you may learn more about CTIAs Recycling Program at http://www.gowirelessgogreen.org/

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. CHARGERS:

Home A.C./Travel chargers will operate within the temperature range of: 0C (32F) to 40C (104F). The chargers designed for your device meet the standard for safety of information technology equipment and office equipment use. Due to different applicable electrical specifications, a charger you purchased in one jurisdiction may not work in another jurisdiction. They should be used for this purpose only. Characteristics of power supply (depending on the country):

Travel charger Input: 100-240 V, 50/60 Hz, 200 mA Output: 5 V, 1 A Battery lithium ion battery 4080 mAh EN-4 Radio waves THIS DEVICE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio-frequency (RF) energy. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. These guidelines include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health. The exposure standard for devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by public authorities such as the Federal Communications Commission of the US Government (FCC), or by Innovation, Science and Economic Development Canada

(ISED), is 1.6 W/kg averaged over 1 gram of body tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. This device is complied with SAR for general population /

uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2ACCJB176 Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output of the device. Before a device model is available for sale to the public, compliance with national regulations and standards must be shown. The highest SAR value for this model 9132X when tested is 1.22 W/Kg for use close to the body. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement for RF exposure. EN-5 For body-worn operation, the device meets FCC RF exposure guidelines provided that it is used with a non-metallic accessory with the handset at least 9 mm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Additional information on SAR can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site:

http://www.ctia.org/

The World Health Organization (WHO) considers that present scientific information does not indicate the need for any special precautions for use of devices. If individuals are concerned, they might choose to limit their own or their childrens RF exposure by limiting the length of using hands-free devices to keep devices away from the head and body. Additional WHO information about electromagnetic fields and public health are available on the following website: http://www.who.int/peh-emf. Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. For the receiver devices associated with the operation of a licensed radio service, they bear the following statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference;

This device must accept any interference received, including interference that may cause undesired operation. Your device is equipped with a built-in antenna. For optimal operation, you should avoid touching it or degrading it. As mobile devices offer a range of functions, they can be used in positions other than against your ear. In such circumstances the device will be compliant with the guidelines when used with a headset or USB data cable. EN-6 If you are using another accessory ensure that whatever product is used is free of any metal and that it positions the device at least 0 mm away from the body. Please note by using the device some of your personal data may be shared with the main device. It is under your own responsibility to protect your own personal data, not to share with it with any unauthorized devices or third party devices connected to yours. For products with Wi-Fi features, only connect to trusted Wi-Fi networks. Also when using your product as a hotspot (where available), use network security. These precautions will help prevent unauthorized access to your device. Your product can store personal information in various locations including memory card, and built-in memory. Be sure to remove or clear all personal information before you recycle, return, or give away your product. Choose your apps and updates carefully, and install from trusted sources only. Some apps can impact your products performance and/or have access to private information including account details, location details and network resources. Note that any data shared with TCL Communication Ltd. is stored in accordance with applicable data protection legislation. For these purposes TCL Communication Ltd. implements and maintains appropriate technical and organizational measures to protect all personal data, for example against unauthorized or unlawful processing and accidental loss or destruction of or damage to such personal data whereby the measures shall provide a level of security that is appropriate having regard to The technical possibilities available;

The costs for implementing the measures;

The risks involved with the processing of the personal data, and;

The sensitivity of the personal data processed. You can access, review and edit your personal information at any time by logging into your user account, visiting your user profile or by contacting us directly. Should you require us to edit or delete your personal data, we may ask you to provide us with evidence of your identity before we can act on your request. EN-7 Licenses microSD logo is a trademark. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TCL Communication Ltd. and its affiliates is under licence. Other trademarks and trade names are those of their respective owners. TCL 9132X Bluetooth Declaration ID D059327 The Wi-Fi Logo is a certification mark of the Wi-Fi Alliance. Google, the Google logo, Android, the Android logo, Google Search TM, Google Maps TM, Gmail TM, YouTube, Google Play Store, Google Latitude TM, and Hangouts TM are trademarks of Google Inc. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License (the text will show when you touch Google legal in Settings > About Tablet

> Legal information) (1). You have purchased a product which uses the open source

(http://opensource.org/) programmes mtd, msdosfs, netfilter/

iptables and initrd in object code and other open source programs licensed under the GNU General Public Licence and Apache Licence. We will provide you with a complete copy of the corresponding source codes upon request within a period of three years from the distribution of the product by TCL Communication Ltd. You may download the source codes from https://sourceforge.net/

projects/tcl-mobile/files/. The provision of the source code is free of charge from the internet.

(1) May not be available in all countries. EN-8 General information Internet address: www.tcl.com Hotline: Go to our website: www.tcl.com/global/en/mobile-

support/hotline&service-center.html Manufacturer: TCL Communication Ltd. Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Electronic labeling path: Touch Settings > System >

Regulatory & safety to find more information about labeling(1), such as FCC ID. On our website, you will find our FAQ (Frequently Asked Questions) section. You can also contact us by email to ask any questions you may have. Disclaimer There may be certain differences between the user manual description and the devices operation, depending on the software release of your device or specific carrier services. TCL Communication Ltd. shall not be held legally responsible for such differences, if any, nor for their potential consequences, which responsibility shall be borne by the carrier exclusively. Warranty Your device is warranted against any defect or malfunctioning which may occur in conditions of normal use during the warranty period of twelve (12) months(2) from the date of purchase as shown on your original invoice. Batteries(3) and accessories sold with your device are also warranted against any defect which may occur during the first six (6) months(2) from the date of purchase as shown on your original invoice. In case of any defect of your device which prevents you from normal use thereof, you must immediately inform your vendor and present your device with your proof of purchase. If the defect is confirmed, your device or part thereof will be either replaced or repaired, as appropriate. Repaired device and accessories are entitled to a one (1) month warranty for the same defect. Repair or replacement may be carried out using reconditioned components offering equivalent functionality. This warranty covers the cost of parts and labor but excludes

(1) May not be available in all countries.

(2) The Warranty period may vary depending on your country of purchase and/or channel of purchase.

(3) The life of a rechargeable device battery in terms of conversation time, standby time and total service life, will depend on the conditions of use and network configuration. EN-9 any other costs. This warranty shall not apply to defects to your device and/or accessory due to (without any limitation):

- Non-compliance with the instructions for use or installation, or with technical and safety standards applicable in the geographical area where your device is used;

- Connection to any equipment not supplied or not recommended by TCL Communication Ltd.;

- Modification or repair performed by individuals not authorised by TCL Communication Ltd. or its affiliates or your vendor;

- Modification, adjustment or alteration of software or hardware performed by individuals not authorised by TCL Communication Ltd.;

- Inclement weather, lightning, fire, humidity, infiltration of liquids or foods, chemical products, download of files, crash, high voltage, corrosion, oxidation There are no express warranties, whether written, oral or implied, other than this printed limited warranty or the mandatory warranty provided by your country or jurisdiction. In no event shall TCL Communication Ltd. or any of its affiliates be liable for indirect, incidental or consequential damages of any nature whatsoever, including but not limited to commercial or financial loss or damage, loss of data or loss of image to the full extent those damages can be disclaimed by law. Some countries/states do not allow the exclusion or limitation of indirect, incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. EN-10

MOA H2D84C088 Model/Modelo:9132X FCC ID: 2ACCUB176 TCL Communication Ltd Bluetooth Declaration ID 0059327 N XxX ZLIA 01 NHW Hecho en China 9132X-2ALOMX11 240A1120084C065

TCL Communication Ltd. Authority to Act as Agent Date: _2022/03/23_ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

______Shenzhen Academy of Information and Communication Technology______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____(Typically 8 12 months)_____ By:

(Signature1) ______Peter yang_____

(Print name) Title:

____Project Manager___ On behalf of: ______

(Company Name) Telephone:

__+86 755 3664 5759__ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022818 11 TCL Communication Ltd. Request for Confidentiality Date: _2022/03/23_ Subject: Confidentiality Request for: _____2ACCJB176_____ Pursuant to FCC 47 CFR 0.457(d) and 0.459 the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *2 Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Tune-Up Procedure Schematics Test Setup Photos Users Manual ___TCL Communication Ltd.__ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

(Signature/Title3) _______Peter yang_______

(Print name) 2 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022818 11

Date: March22, 2022 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request permission to use Wi-Fi/BT test results from Model 9132G in our applications for model 9132X FCC ID: 2ACCJB176 To whom it may concern:

We,SAICT,according to the 9132X-Declaration of changes from Initial to Variant supplied by TCL Communication Ltd request permission to partially use Wi-Fi/BT test results from model 9132G (FCC ID: 2ACCJB177 ) in our applications for model TA-1338(FCC ID: 2ACCJB176 ). You can find details next page:

For the above, we performed full test for SAR partially re-used the test results of 9132G for other parts, shown as below. For details, please refer to the relevant test BT LE with EDR FCC certification part15C testing WiFi Part WiFi 802.11b/g/n 2.4G FCC certification part15C testing Test done on the new model Spot Check of Output Power, Spot Check of Radiated Emission Spot Check of Output Power, Spot Check of Radiated RE All retest All retest reports. Item BT Part 15B Part SAR part SAICT Building G, Shenzhen International Innovation Center, No.1006 Shennan Road, Futian District, Shenzhen, Guangdong,China Tel:0755-33322000-8383 Fax: Email:chenliang@caict.an.cn

7/F, Block F4, TCL Communication Technology Building, TCL International E City, Zhong Shan Yuan Road, Nanshan District, Shenzhen, Guangdong, P.R. China 518052 TEL: 0086-755-36611722 FAX: 0086-75536612000-81722 Declaration of changes from Initial to Variant General: 9132X is a variant product of 9132G SOFTWARE MODIFICATIONS:

Protocol Stack changes: NO MMS/STK/USAT/USIM changes: NO DM/SUPL/VT/FUMO/SWP/HCI: NO (indicated the changed items if yes) Other changes detailed: mode name change HARDWARE MODIFICATIONS:

Band changes: yes PCB Layout changes: NO Main RF components changes:

GSM850 GSM900 GSM1800 GSM1900 yes yes yes yes yes yes yes yes No No No No Power Amplifier yes yes yes yes yes yes yes yes Antenna AP Modem Transceiver Rx SAW Filter ASM Antenna AP Modem Transceiver Power Amplifie r Tx SAW Filter Duple xer ASM UMTS210 0 UMTS190 0 UMTS170 0 UMTS900 UMTS850 yes yes yes yes yes yes yes yes yes yes No No No No No yes yes yes yes yes NA NA NA NA NA No No No No No No No No No Ante nna yes AP No Mode m yes Transcei ver No Power Amplifier yes Tx SAW Filter NA Rx SAW Filter yes Duplexer ASM yes No yes No yes yes No No yes yes NA NA yes yes LTE Band 1 LTE Band 2 LTE Band 3 yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes LTE Band 4 Band 5 Band 7 Band 8 Band 12 Band 13 Band 17 Band 20 Band 28 Band 38 Band 40 Band 41 Band 66 yes yes yes yes yes yes yes yes yes yes yes yes yes No No No No No No No No No No No No No yes yes yes yes yes yes yes yes yes yes yes yes yes No No No No No No No No No No No No No yes yes yes yes yes yes yes yes yes yes yes yes yes NA NA NA NA NA NA NA NA NA yes yes yes NA yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes NA NA NA yes yes yes yes yes yes yes yes yes yes yes yes yes yes Antenna AP Modem Transceiver Balun Diplexer Power Amplifie r NA NA NA NA Band pass filter No No No No Bluetooth No No Wi-Fi No No No No No No FM changes: NO LCD/ Speaker/ Camera/ Vibrator changes: (indicated the changed items if yes) No Other changes detailed:

MECHANICAL MODIFICATIONS:

Use new metal front/back cover or keypad: NO Mechanical shell changes: NO Whole size of EUT: NO Distance of Ear reference point to bottom of handset: NO Other trinkets to change the surface of handset: NO Other changes detailed:

APPROVED BY:

Project Manager:

Signature:

Date: 2022-03-23

TCL Communication Ltd. DFS Client Declaration Letter Date: March 13,2022 We have declared below featured for device, FCC ID: 2ACCJB176

(1) DFS Device Master Client with Radar detection capability Client without radar detection capability

(2) Active / Passive Scanning, ad hoc mode access point capability Frequency Band (MHz) Access point Capability Scanning Plan Ad Hoc Mode Capability WiFi Direct Group Owner WiFi Direct Group Client 2412 - 2462 5180 5240 5260 5320 5500 5580 5660 5700 Active Active Passive Passive Passive 5745 - 5825 Active Yes Yes No No No Yes Yes Yes No No No Yes Yes Yes No No No Yes Yes Yes Yes Yes Yes Yes

(3) Country code selection capability to end user-

If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection) No Yes,

(4) Transmission in 5600 MHz to 5650 MHz is notched -

Yes, No

(5) Meet Part 15.202 requirement -

Yes, No A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices. A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(6) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands

(devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply, Not Apply, (If apply, please help to provide explanation on it was implement, and how software was controlled). Signature Printed Name:_Peter Position:Product Company:TCL Certification Communication Manager Ltd.