FCC ID: 2ARUDTS8132SW Wireless Subwoofer

3.1.2 Channel Dolby Atmos Sound Bar with Wireless Subwoofer Alto 8e User Manual Contents 1 Before you begin ................................................ 3 2 Welcome

............................................................. 4 Whats in the box .......................................................... 4 Overview of the Sound Bar .......................................... 6 Overview of the wireless subwoofer ............................. 8 Set up your Sound Bar system .................................... 9 Position Your Sound Bar and Subwoofer ..................... 9 Mount your Sound Bar on the wall ............................... 10 14 Install/replace the remote control batteries.................... 15 Overview of the Remote Control ................................... 3 Connect your Sound Bar system ..................... 17 Connect with the HDMI cable ...................................... 17 19 Optional: Connect your Blu-ray player ........................ Connect with the optical cable ................................... 20 Direction for setting up your Sound Bar using an optical cable .................................................................. 21 Connect your Sound Bar to power supply ................... 22 Connect the Sound Bar with your Bluetooth device .... 23 Connect your wireless subwoofer to the Sound Bar .... 24 1 4 Use your Sound Bar system .............................. 25 Use your Sound Bar with the top panel or remote control ........................................................................... Listen to music from your Bluetooth device ................ Use the USB cable or device for music playback ........ 25 28 29 5 Specifications .................................................... 30 6 Notice ................................................................. 31 Notice for USA .............................................................. 31 Notice for Canada ......................................................... 32 33 Disposal of your old product and battery ..................... 34 Trademarks ................................................................... 7 FAQ ..................................................................... 35 2 1 Before you begin for your listening comfort. 3 2 Welcome Congratulations on the purchase of your new TCL Sound Bar!

After it is set up and connected, you can experience a superb sound quality and state-of-the-art design to best fit your home entertainment system. You are recommended to read through this user manual which helps you set up, connect and operate the product easily and properly. Lets get started. Whats in the box Sound Bar Wireless Subwoofer Remote control AAA battery x 2 AC power cord x 2 4 Optical cable HDMI cable Wall mount bracket x 2 Wall anchor x 2 Wall mounting screw x 2 Sleeve x 2 Safety instructions Warranty card Safety leaflet Warranty card QSG Quick Start Guide Wall mount template 5 Overview of the Sound Bar 1 2 3 4 HELLO 6 5

7 8 9 10

11 Short press to enter Sleep or Standby mode. Long press to enter Standby mode. Press to switch the audio source among HDMI ARC/HDMI IN/OPT/BT/USB modes. 1 2 3 Press to select the Bluetooth function. Press and hold to enter the pairing mode. 6 4 5 6 8 9 10 11 Press to increase or decrease the volume level.

It indicates the Sound Bar status (e.g. volume level, sound bar status). White LED:

It indicates standby/sleep mode. 7

7 Overview of the wireless subwoofer

2 3 1 1 AC input power connector 2 Amber LED indicator ashes slowly when the subwoofer is in standby mode. ashes quickly when pairing is in progress. remains on solidly when pairing is successful. 3

Press and hold button on the Sound Bar main unit for 5 seconds. Press and hold button on the subwoofer till the pairing finished. And then the amber LED keep lighting up on the subwoofer. Note The subwoofer is already paired at the factory. Manually pairing is needed only in case of troubleshooting. 8 Set up your Sound Bar system

Make sure you read all the safety information before you mount the Sound Bar main unit on the wall. Make sure you use screws provided or specified by the authorized manufacturer. TCL Overseas Marketing Limited bears no responsibility for accidents or damage caused by improper wall mounting and screws installation or insufficient wall strength, etc. Additional tools (not supplied) are required for installation. You can choose to place your Sound Bar below the center of your TV or mount it on the wall. Position Your Sound Bar and Subwoofer The ideal place to position the Sound Bar main unit is centered underneath your TV. You are recommended to place the Sound Bar main unit on the top of the cabinet and right below the center of your TV. The distance between the subwoofer and the Sound Bar main unit should be less than 9.8'. 9

< 9.8'

TV Mount your Sound Bar on the wall 1 Place the supplied wall mount template on the wall. Make sure the wall mount template is at least 2 inches

(5cm) below the center of the TV. 2 Use a level to make sure the wall mount template is positioned accurately. 3 Use the tape to stick the wall mount template firmly on the wall. TV 10 4 Mark on the wall using each marking on the template through the mounting holes. 5 Take away the wall mount template. 6 Drill a screw hole at each marking on the wall. TV TV

> 2"

3 4 1 30.7"

5 2 6 7 Screw off the rubber cushions from the soundbar.

(Reserve the rubber cushions for future use)

* The rubber cushions can be used as soundbar mats when you put the soundbar on the table 8 Screw on the wall mount brackets to the soundbar. 9 Insert the supplied screws with the sleeves into the hole of the wall anchors. 11 7 8 7 8 12 10 Fix and tighten the wall bracket screws on the wall. 11 Hang the Sound Bar on the screws. 9 10 9 10 11

Check the installation location before you mount the Sound Bar on the wall (see Mount your Sound Bar on the wall on page 10). You may consider to connect the cables first before mounting the Sound Bar on the wall. 13 Install/replace the remote control batteries

The battery contains perchlorate material, handle it with care. For information, refer to www.dtsc.ca.gov/hazardouswaste/perchlorate 1 Open the battery compartment, remove the old batteries if necessary. 2 Place two new AAA batteries into the battery compartment with the correct polarity (+/-). 3 Close the battery compartment. 1 2 3 Setup is complete. Your Sound Bar is ready to use. For more information about how to access different connection options on your Sound Bar, see the following chapter. 14 Overview of the Remote Control 1 2 5 4 7 11 12 15 3 6 8 9 10 13 14 1 2 3 4 5 Short press to enter Sleep or Standby mode. Long press to enter Standby mode. Press to adjust the lightness of the display. Press and hold for 3 seconds to enter Night mode or close Night mode. Press to turn on/off Dolby vertical surround. Press to switch the audio source to Optical mode. Press to switch the audio source to HDMI IN source. 15 6 7 8 9 10 11 12 13 14 15 Press to switch the audio source to HDMI OUT (ARC) source. Press to switch the audio source to USB source. Press to switch the audio source to Bluetooth mode. Press and hold to enter pairing mode. Press to switch on/off Pass Through function.

Press to select the equalizer (EQ) effect when you are watching , or listening to . Increase or decrease the treble sound effect. Switch to previous or next music. (Under Bluetooth or USB mode) Decrease or increase the volume level. Press to play/pause the music. (Under Bluetooth or USB mode) In Standby or Sleep mode, press and hold for 5 seconds to enter Menu, and then press view options. And press OK to confirm. to Press to mute or unmute the sound. Increase or decrease the bass sound effect. 16 3 Connect your Sound Bar system After you have fixed the position of the Sound Bar, you can start connecting it to your TV or other devices and listen to the audio through your Sound Bar. Make sure you have muted the audio of your TV or device. For information, check the user manual of your TV or device. Connect with the HDMI cable

Make sure your TV or device supports the HDMI ARC feature. For information, check the user manual of your TV or device. Connect one end of the HDMI cable to the HDMI ARC input connector on your Sound Bar and another end to the HDMI ARC output connector of your TV or device. To get the best possible audio experience using the HDMI cable, follow below given steps:

17 1 Connect your Sound Bar to HDMI input marked () on your TCL TV. 2 Press the button on your TCL TV remote. 3 Navigate to System options. 4 Set T-Link to . (This feature may be called, Anynet+, SimpLink, BRAVIA Link, EasyLink or VIERA Link*.) All technology names mentioned are the trademarks or registered trademarks of their respective companies. 18 Optional: Connect your Blu-ray player For ease of use, you are advised to connect a Blu-ray player to the TV and enjoy the Sound Bar through HDMI-ARC. However, in order to enjoy Dolby TrueHD based Atmos content that not all TVs may support through HDMI-ARC, you can optionally connect your Blu-ray player directly to the Sound Bar using the HDMI-in port. Notes The Sound Bar willl pass on the video signal to the TV. If it is not successful, turn on the Sound Bar and try again. The HDMI input supports UHD (4K) and that it can also be used for game console to enjoy Dolby Atmos audio. 19 Connect with the optical cable 1 Remove the protective caps from the optical cable when necessary. 2 Connect one end of the optical cable to the optical input connector on your Sound Bar and another end to the optical output connector of your TV or device.

If there is no sound output from the Sound Bar, try to activate the PCM signal output on your TV or device. PCM is used to convert analog audio signals into digital audio signals in most devices. For more information of how to activate the PCM signal output, check the user manual of your TV or device. 20 Direction for setting up your Sound Bar using an optical cable Do not bend or kink the optical cable (SPDIF) as it is fragile and can easily get damaged and broken. To get the best possible audio experience using the optical cable:

1 Press the Home button on your TCL TV Remote. 2 Navigate to under . 3 Uncheck the option. 4 Under and , select .

21 Connect your Sound Bar to power supply 1 Make sure that you have completed all other connections before connecting the Sound Bar to power supply. 2 Make sure the power supply voltage complies with your countrys safety standards (see Specifications on page 29) 3 Connect one end of a supplied AC power cord to the AC input connector on your Sound Bar and another end to the power socket on the wall.

22 Connect the Sound Bar with your Bluetooth device

Make sure your wireless device supports the Bluetooth function. The operational range between the Sound Bar and your Bluetooth device is approximately 394 (without any obstacle between the Bluetooth device and the Sound Bar). 1 Press on the top panel of your Sound Bar or remote control to power on the Sound Bar. 2 Press and hold remote control. on the top panel of your Sound Bar or PAIR is flashes on the LED display. The Sound Bar is ready to pair. 3 Power on your Bluetooth device and activate its Bluetooth function. 4 Select on the pairing list of your Bluetooth device. You hear distinct double beep sound.

If you cannot find the model name on your Bluetooth device, press and hold on the remote control. You will see PAIR . Now the Sound Bar is coming into the pairing mode. 23

Your Sound Bar system is now set up and ready to be used. 5 To disconnect the Bluetooth function, you can:

press on the Sound Bar or remote control to switch to another source; or disable the Bluetooth function on your device; or press and hold

on the remote control for 3 seconds. Connect your wireless subwoofer to the Sound Bar When the wireless subwoofer is connected, you can enjoy powerful deep bass sounds and a truly immersive audio experience. Auto pairing Make sure both the Sound Bar and wireless subwoofer are connected to the power supply and are turned on. 24 The Sound Bar will pair with the subwoofer automatically. The amber LED will flash when pairing is in progress. The amber LED will remain on solidly when pairing is successful.

If you have devices more than one to be connected, please connect the next one after connecting the previous one successfuly. 4 Use your Sound Bar system Use your Sound Bar with the top panel or remote control 1 Make sure the Sound Bar is properly connected to the power supply and sources. 2 Press at the top panel of your Sound Bar main unit or remote control to switch to the correct source. 25

Sound Bar status LED display Power Source Bluetooth USB OPT HDMI Power on Standby Sleep Sleep mode Standby mode HDMI IN HDMI ARC USB BLUETOOTH OPTICAL Normal Pairing mode Normal Plug off USB device Play Pause Normal Audio format Normal Audio format HELLO STDBY Sleep White LED ashes slowly White LED HDMI1 IN HDMI2 ARC USB BT opt BT PAIR USB NOUSB Show playing time PAUSE OPT PCM AUDIO/DOLBY AUDIO HDMI PCM AUDIO/DOLBY AUDIO/

DOLBY ATMOS 26 ARC(eARC) Normal Audio format Audio Setting Volume display Max & Min Volume Mute Treble Bass Vertical Surround EQ Setup Night Setup DIM Setup ARC PCM AUDIO/DOLBY AUDIO/

DOLBY ATMOS V 22 V MAX/V MIN MUTE TRE-3 ~ TRE+3 BAS-3 ~ BAS+3 SURR ON/SURR OFF MOVIE/MUSIC/TV NIGHT DIM 1(100%)/DIM 2(50%) Menu Sleep mode switch Factory Reset SLEEP ON/SLEEP OF factory reset After powering on your Sound Bar, if there is no operation performed on either the Sound Bar or remote control within 10 seconds, all LED indicators on the Sound Bar will turn off and light up again when the operation is resumed.

You can use more advanced functions on the remote control (see Overview of the remote control on page 15). 27 Listen to music from your Bluetooth device 1 Make sure that your device supports A2DP and/or AVRCP. For information, check the specification of your device. 2 Pair your Bluetooth device with the Sound Bar (see Connect the Sound Bar with your Bluetooth device on page 23). 3 Start listening to music stored in your Bluetooth device through the Sound Bar. If your Bluetooth device supports A2DP, you can listen to music, but you cannot control the playback. If your Bluetooth device supports AVRCP, you can listen to music and control music playback with the remote control. Press to pause or resume music playback. Press track. to skip to the previous/next

The operational range between the Sound Bar and your Bluetooth device is approximately 32.8 (without any obstacle between the Bluetooth device and Sound Bar). 28 Use the USB cable or device for music playback Press on the remote control to listen to/pause/

resume the music. or Press previous or next track. on the remote control to skip to the Press or to increase or decrease the volume level. AC IN

This Sound Bar can support USB devices of up to 64GB memory and the supported file format is MP3. Musics in folders of the USB device should be within 5 (including 5) directory levels. Otherwise, the sound bar can not detect the musics. 29 5 Specifications Power consumption at standby mode: 0.5W Impedance: 6

3.1.2 Channel Dolby Atmos Sound Bar with Wireless Subwoofer

Power Supply: AC 100-240V50/60Hz Power consumption: 30W Frequency response: 160Hz-20KHz Dimensions (WxHxD): 39.4"x2.6"x4.8" / 1000x65x122mm Weight: 7.3 lbs (3.3 kg) Operating temperature: 0C - 45C

Power Supply: AC 100-240V50/60Hz Power consumption: 30W Frequency response: 40 Hz-120 Hz Frequency range: 5727MHz-5848MHz Max transmitting power: 13dBm Dimensions (WxHxD): 7.9"x13.8"x7.9" / 200x350x200mm Weight: 7.7 lbs (3.5 kg)

Power consumption at standby mode: 0.5W Bluetooth version: 5.0, Bluetooth profile - Bluetooth stereo supported (Advanced Audio Distribution Profile -

A2DP; Audio Video Remote Control Profile - AVRCP) Frequency range: 2402 Mhz 2480 Mhz Max transmitting power: 15dBm

Distance/Angle: 6m/ 30 Battery type: 1.5V AAA battery x 2, user replaceable. Wi-Fi WLAN Standard Security IEEE802.11a/b/g/n/ac WPA2TM/WPATM 30 Frequency range 2.4 GHz band (1-11 ch)/5 GHz band For USA 2412 MHz to 2462 MHz 5180 MHz to 5320 MHz 5550 MHz to 5580 MHz 5660 MHz to 5720 MHz 5745 MHz to 5825 MHz 20 dBm Maximum power(EIRP) 6 Notice Notice for USA FCC Information Warning Changes or modications to this unit not expresslyapproved by the party responsible for compliance could void the users authority to operate the equipment. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help. FCC Suppliers Declaration of Conformity 3.1.2 Channel Dolby Atmos Sound Bar with Wireless Subwoofer, Model TS8132 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. 31 Supplier Name: TTE Technology, Inc. (dba TCL North America) Supplier Address: 1860 Compton Ave, Corona, CA 92881, USA Supplier phone number and internet contact information:

1-877-300-9223 https://support.tclusa.com FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Notice for Canada Class B Clause This Class B digital apparatus complies with Canadian ICES-003 IC Radiation Exposure Statement This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Warning: The user is cautioned that changes or not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Disposal of your old product and battery Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

To remove the disposable batteries, see the section Install /

replace the remote control batteries.

We have omitted all unnecessary packaging and make sure it is eco-friendly and sustainable. 32 Trademarks The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TTE Corporation is under license. Other trademarks and trade names are those of their respective owners. Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. from Dolby Laboratories. Manufactured under Confidential unpublished works. Copyright 2012-2020 Dolby Laboratories. All rights reserved. license The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. 33 7 FAQ No power Make sure the AC power cord and AC input connector are connected properly. Make sure there is power supply. Make sure the Sound Bar has turned on. Make sure the audio cable is connected to the Sound Bar and your device. Make sure you have selected the correct source. Press Make sure the Sound Bar is not muted. to increase the volume level. No sound Low voice Use the remote control to adjust the volume. May opend Night mode, please press for 3 seconds to exit the Night mode.

* Other EQs cannot be selected in Night Mode. The remote control does not work. Make sure you have selected the correct source. Make sure the distance of remote control and the Sound Bar is within operational range. Make sure the battery is correctly inserted and is working. Make sure the remote control is close to the remote control sensor of the Sound Bar. I hear distorted sound. Make sure all cables are properly connected. Make sure you have selected the correct source. Make sure the TV is muted if you play audio from the TV. I cannot find the Bluetooth name of this Sound Bar on my Bluetooth device. Make sure the Bluetooth function is activated on your Bluetooth device. Make sure the Sound Bar has paired with your Bluetooth device. 34

visit support.tclusa.com or support.tclcanada.com Or call 1-877-300-9223 WE ARE READY TO HELP contact us rst with any questions

Copyright 2020 TCL. All rights reserved. TS8132_NA_EN_UM_V0.6 English Important safety instructions Make sure you read all the safety information before you use this product. TCL Entertainment Solutions Limited bears no responsibility for accidents or damages caused by unauthorized changes, modications or improper use of the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning ash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufcient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. This symbol indicates that this product incorporates double insulation between hazardous main voltage and user accessible parts. When servicing, use only identical replacement parts. Compliance notice Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Cautions To prevent electric shock, match wide blade of plug to wide slot, fully insert. Do not place any sources of danger on the product (for example: liquid lled objects, lighted candles). Disconnect the power cord to shut off when nd trouble or not in use. The power cord shall be readily operable. readily operable. Use of controls or adjustments or performance of procedures other than those described herein, may result in hazardous radiation exposure or other unsafe operation. The power cord/appliance coupler is used as the disconnect device, the disconnect device must remain Notice for US FCC Information Warning Note The rating label is located at the bottom or back of the p roduct. The use of apparatus in tropical and moderate climates. Battery precautions Do not mix batteries (old and new or carbon and alkaline). Do not dispose of batteries in re or water. Recycle or dispose of batteries as per state and local guidelines. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Changes or modications to this unit not expresslyapproved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help. Warnings To reduce the risk of re or electric shock, do not expose this product to rain or moisture. This product should not be exposed to dripping or splashing. No objects lled with liquids, such as vases, should be placed on or near the product. new ones. The product is unstable if it is not properly placed or mounted to the wall. Be sure to follow the wall mounting instructions provided in the user manual to ensure your safety. Do not expose batteries to excessive heat such as sunshine, re, and so forth. When the remote control is not to be used for a long time (more than a month), remove the battery from the remote control to prevent it from leaking. If the batteries leak, wipe away the leakage inside the battery compartment and replace the batteries with This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Keep away the batteries from heat or moisture. Do not carry or store batteries with other metallic objects. Doing so could cause batteries to short circuit, leak or explode. Never recharge a battery unless it is conrmed to be a rechargeable type. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Safety Read these instructions - Read all the safety and operating instructions before operating the product. Retain these instructions - Retain the safety and operating instructions for future reference. Heed all warnings - Adhere to all warnings on the product and in the operating instructions. Follow all instructions - Follow all operating and use instructions. Do not use this apparatus near water The appliance should not be used near water or moisture for example, in a wet basement or near a swimming pool and the like Clean only with a dry cloth. Disposal of your old product and battery Notice for Canada Class B Clause Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This Class B digital apparatus complies with Canadian ICES-003 This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities. This product contains non-removable batteries:

Do not incinerate. Batteries may explode if overheated. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1.This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. For disposal or recycling information, please contact your local authorities. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

(including ampliers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where it exits from the product. Use only attachments/accessories specied by the manufacturer. CAUTION: replacement of a battery with an incorrect type that can defeat a safeguard. CAUTION: disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;

CAUTION: leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of ammable liquid or gas. CAUTION: a battery subjected to extremely low air pressure that may result in an explosion or the leakage of ammable liquid or gas. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. For 5G WIFI Device The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. IC Radiation Exposure Statement This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Warning: The user is cautioned that changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 70-T8132N-SAFB2 Franais Consignes de scurit importantes Assurez-vous de lire toutes les informations de scurit avant d'utiliser ce produit. TCL Entertainment Solutions Limited ne prendra aucune responsabilit pour tous accidents ou endommages causs par des changements non autoriss, des modications ou des utilisations inappropries du produit. MISE EN GARDE RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR Dbranchez cet appareil lors dorages ou lors de non-utiliser pendant une longue temps. Conez tout entretien au personnel quali. Un entretien est requis lorsque lappareil a t endommag de quelque manire que ce soit, par exemple au niveau du cordon dalimentation ou de la che ou si un liquide a t renvers ou des objets sont tombs dans lappareil, sil a t expos la pluie ou lhumidit, ne fonctionne pas normalement ou sil a t abandonn. Avis pour les tats-Unis Informations sur la FCC Avis de conformit Mises en garde Pour viter les lectrocutions, faites correspondre la lame large de la che la fente large et Avertissement Les changements ou les modications sur cet appareil non expressment approuvs par la partie responsable de la conformit pourraient invalider l'autorit de l'utilisateur pour manipuler l'quipement. MISE EN GARDE : NE RETIREZ PAS LE COUVERCLE (OU LE DOS), SINON RISQUER UN CHOC ELECTRIQUE. AUCUNE PICE NEST RPARABLE PAR LUTILISATEUR LINTRIEUR. CONFIEZ LENTRETIEN UN TECHNICIEN QUALIFI. insrez-la compltement. allumes). Ne placez aucune source de danger sur le produit (par exemple, objets remplis de liquide, bougies Le symbole de lclair en forme de che, situ dans un triangle quilatral, a pour but dalerter lutilisateur de la prsence dune tension dangereuse non isole lintrieur du botier du produit pouvant tre sufsamment importante pour constituer un risque dlectrocution. Le point dexclamation dans un triangle quilatral est destin alerter lutilisateur de la prsence de consignes importantes dutilisation et de maintenance (entretien) dans la documentation accompagnant le produit. Ce symbole indique que ce produit comporte une double isolation entre la tension principale dangereuse et les pices accessibles lutilisateur. Lors de lentretien, utilisez uniquement des pices de rechange identiques. Dbranchez le cordon dalimentation pour lteindre en cas de problme ou si vous ne lutilisez pas. Le cordon dalimentation doit tre facilement utilisable. Lutilisation de commandes ou de rglages, ou lexcution de procdures autres que celles dcrites dans les prsentes, peut entraner une exposition des radiations dangereuses ou toute autre opration dangereuse. Le coupleur du cordon dalimentation/de lappareil est utilis comme dispositif de dconnexion; le dispositif de dconnexion doit rester facilement utilisable. tiquette d'identication se trouve au bas ou larrire du produit. L L'appareil peut tre utilis dans des climats tropicaux et modrs. Prcautions relatives la batterie Ne mlangez pas les piles (uss et neuves, au carbone et alcalines). Ne jetez pas les piles au feu ou dans leau. Avertissements Pour rduire les risques dincendie ou dlectrocution, nexposez pas ce produit la pluie ou lhumidit. Ce produit ne doit pas tre expos des gouttes ou des claboussures. Aucun objet rempli de liquide, tel quun vase, ne doit tre plac au-dessus ou proximit du produit. Recyclez ou jetez les piles conformment aux directives nationales et locales. Danger dexplosion si la pile est remplace de manire incorrecte. Remplacez uniquement par le mme type ou un type quivalent. Lorsque la tlcommande ne doit pas tre utilise pendant une longue priode (plus dun mois), retirez la pile de la tlcommande pour lempcher de couler. Le produit est instable sil nest pas correctement plac ou x au mur. Veuillez suivre les instructions de Si les piles coulent, essuyez les coulements lintrieur du compartiment des piles et remplacez les montage mural fournies dans ce manuel dutilisation pour assurer votre scurit. piles par des neuves. Nexposez pas les piles une source de chaleur excessive telle que le soleil, le feu, etc. Gardez les piles lcart de la chaleur ou de lhumidit. Scurit Lisez ces consignes Lisez toutes les consignes de scurit et dutilisation avant dutiliser le produit. Conservez ces consignes Conservez les consignes de scurit et dutilisation pour une consultation Ne transportez pas et ne stockez pas les piles avec dautres objets mtalliques. Cela pourrait provoquer un court-circuit, un coulement ou une explosion des piles. Ne rechargez jamais une pile sauf sil est prouv quelle est rechargeable. Mise au rebut de votre produit usag et de la batterie ultrieure. demploi. Respectez tous les avertissements Respectez tous les avertissements sur le produit et dans le mode Votre appareil est conu et fabriqu avec des composants et des matriaux de haute qualit, pouvant tre recycls et rutiliss. Observez toutes les consignes Observez le mode demploi et toutes les consignes dutilisation. Nutilisez pas cet appareil proximit deau Cet appareil ne doit pas tre utilis proximit deau ou dhumidit par exemple, dans un sous-sol humide ou prs dune piscine, etc. Nettoyez uniquement avec un chiffon sec. Ce produit peut contenir du plomb et du mercure. Llimination de ces matriaux peut tre rglemente pour des raisons environnementales. Pour plus dinformations sur la mise au rebut ou le recyclage, contactez les autorits locales. Ne bloquez aucune bouche daration. Installez conformment aux instructions du fabricant. Ce produit contient des piles non amovibles :

Remarque Cet quipement a t test et dclar conforme aux limites imposes aux appareils numriques de classe B, conformment la section 15 du rglement de la FCC. Ces limites sont conues pour fournir une protection sufsante contre les interfrences prjudiciables dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre de lnergie radiolectrique et, sil nest pas install et utilis conformment aux instructions fournies, peut produire des interfrences affectant les communications radio. Cependant, rien ne garantit que des interfrences ne se produiront pas dans certaines installations. Si cet quipement gnre des interfrences prjudiciables la rception de signaux radio ou de tlvision

(ce qui peut tre constat en teignant puis en rallumant lappareil), nous conseillons lutilisateur dessayer une ou plusieurs des mesures suivantes pour tenter de corriger le problme :

Rorienter ou dplacer lantenne de rception. loigner davantage le rcepteur de lquipement. Brancher lquipement sur une prise de circuit diffrente de celle sur laquelle le rcepteur est branch. Cet appareil est conforme la section 15 de la rglementation de la FCC. Le fonctionnement est soumis aux deux conditions suivantes:

(1) cet appareil ne doit pas causer d'interfrences nuisibles, et

(2) Cet appareil doit accepter toutes les interfrences reues, y compris celles susceptibles de provoquer un fonctionnement indsirable. Dclaration de la FCC sur lexposition aux rayonnements : Cet appareil est conforme aux limites de la FCC sur lexposition aux rayonnements dnies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Cet metteur ne doit pas tre plac au mme emplacement ni tre utilis avec toute autre antenne ou tout autre metteur. Avis pour le Canada Clause de classe B Cet appareil numrique de classe B est conforme la norme canadienne ICES-003. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Ne linstallez pas prs de sources de chaleur telles que les radiateurs, les bouches de chaleur, les poles ou autres appareils (y compris les amplicateurs) produisant de la chaleur. Ne dtruisez pas l'objectif de scurit de la che polarise ou mise la terre. Une che polarise a deux lames avec une plus large que lautre. Une che de type mise la terre a deux broches et une troisime broche de mise la terre. La lame large ou la troisime broche sont fournies pour votre scurit. Si la che fournie ne rentre pas dans votre prise, consultez un lectricien pour remplacer la prise obsolte. Protgez le cordon d'alimentation des pitinements et des pincements, en particulier au niveau des Ne pas incinrer. Les piles peuvent exploser si elles sont surchauffes. Pour plus dinformations sur la mise au rebut ou le recyclage, contactez les autorits locales. Dclaration IC relative lexposition aux rayonnements ATTENTION: Risque d'incendie ou dexplosion si la batterie est remplace par un type incorrect ATTENTION: remplacement dune batterie par un type incorrect pouvant supprimer une protection ATTENTION: mise au rebut dune batterie dans un feu ou dans un four chaud, ou crasement Pour se conformer aux exigences de conformit CNR 102 RF exposition, une distance de sparation d'au moins 20 cm doit tre maintenue entre l'antenne de cet appareil ettoutes les personnes. Attention : le droit de lutilisateur de faire usage de lappareil peut tre annul par des modications ou changements non approuvs expressment par lentit en charge de la conformit de lappareil par rapport aux normes. ches, des prises de courant et du point de sortie du produit. mcanique ou coupure dune batterie, susceptible de provoquer une explosion Nutilisez que les pices jointes / accessoires spcis par le fabricant. Nutilisez que avec le chariot, le pied, le trpied, le support ou la table spcis par le fabricant ou ATTENTION: maintien dune batterie dans un environnement trs haute temprature pouvant provoquer une explosion ou la fuite de liquide ou de gaz inammables;

vendus avec l'appareil. Lorsquun chariot est utilis, faites attention lorsque vous dplacez la combinaison chariot/appareil pour viter les blessures dues au renversement. ATTENTION: batterie soumise une pression de lair extrmement faible pouvant provoquer une explosion ou la fuite de liquide ou de gaz inammables. Pour appareil Wi-Fi5G Lappareil utilis dans la bande 51505250MHz ne doit tre utilis qu lintrieur an de rduire le risque de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux.

60.0 mm 76.0 mm Re ee es Peri Waist aa ai eee pray Pere aay Se ee eon Beet ett a 2. Press the @) button onthe subwoofer for 2 seconds, he LED next othe Bee pene artnet eat etd pancreas The stimoofer fs now connected tothe sounder. TC a Po eee Model: TS8132-SW ea CREA CAUTION ee ey Tegra Ree ena Cantata Ee ee eee eee ens TTLYYWWCRXXXXS 2 2

C5266091_X10_Ed.1 TCL Entertainment Solutions Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 01/25/2021 Subject: Request for Confidentiality FCC ID: 2ARUDTS8132SW To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name:Ada shi Title: Engineer 1/1

TCL Entertainment Solutions Limited I, the signer, Ada shi The difference between the following products just lies in the model , the other is the same. Item Name Wireless Subwoofer FCC ID: 2ARUDTS8132SW Model Number: TS8132-SW Additional Model:, TDS8132-SW, FS8132-SW, OS8132-SW, Alto8e-SW, TS8132K-SW, TDS8132K-SW, ***8132-SW (* can be any alphanumeric character including blank for marketing differences) Name:Ada shi Title: engineer Company: TCL Entertainment Solutions Limited

C5266091_X8_Ed.1 Letter of Authorization Company: TCL Entertainment Solutions Limited Address: 7/F, building 22E, 22 science park east avenue,Hong Kong science park, SHATIN, N.T. ,Hong Kong Product Name: Wireless Subwoofer Model Number: TS8132-SW, TDS8132-SW, FS8132-SW, OS8132-SW, Alto8e-

SW, TS8132K-SW, TDS8132K-SW, ***8132-SW FCC Identifier: 2ARUDTS8132SW We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Ada shi Date:01/25/2021 Title: Engineer Signature of applicant:

1/1

C5266091_X13_Ed.1 TCL Entertainment Solutions Limited FCC Software Configuration Control Declaration Date:01/25/2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Product/ Model Number: TS8132-SW Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Signature of applicant Name:

Title: Engineer 1/1