FCC ID: XEG-AKBT10 Bluetooth Adaptor

X AK-BT10 Bluetooth Adaptor OWNERS MANUAL Introduction Thank you very much for purchasing the TASCAM AK-BT10. Connect the TASCAM AK-BT10 to the Bluetooth device connector on a compatible product to enable Bluetooth connection with smartphones, computers and other devices. Before connecting and using this unit, please take time to read this manual thoroughly to ensure you understand how to properly set it up and connect it, as well as how to use its many useful and convenient functions. After you have finished reading this manual, please keep it in a safe place for future reference. You can also download this Owners Manual from the TEAC Global Site (https://teac-

global.com/). For details about using the AK-BT10, see the Owners Manual of the compatible product. Check the TEAC Global Site (https://teac-global.com/) for the latest information about compatible products. Included items This product includes the following items. Take care when opening the package to avoid damaging the items. Keep the packing materials for transportation in the future. Please contact the store where you purchased this unit if any of these items are missing or have been damaged during transportation. o AK-BT10 ............................................................................................................................................... x 1 o Owners Manual ................................................................................................................................ x 1 IMPORTANT SAFETY INSTRUCTIONS WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. For U.S.A Suppliers Declaration of Conformity Model Number: AK-BT10 Trade Name: TASCAM Responsible party: TEAC AMERICA, INC. Address: 10410 Pioneer Blvd. Suite #1 Santa Fe Springs, California 90670, U.S.A. Telephone number: 1-323-726-0303 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. a) Reorient or relocate the receiving antenna. b) Increase the separation between the equipment and receiver. c) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. d) Consult the dealer or an experienced radio/TV technician for help. CAUTION Changes or modifications to this equipment not expressly approved by TEAC CORPORATION for compliance could void the users authority to operate this equipment. For Canada THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. Hereby, TEAC Corporation declares that the radio equipment type AK-BT10 is in compliance with Directive 2014/53/EU, and the other Directives or Commission Regulations. The full text of the EU declaration of conformity is available at the following internet address: Please contact us by e-mail. https://tascam.eu/en/kontakt.html EU Importer: TEAC Europe GmbH Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany 1. 2. 3. 4. 5. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. 6. 7. 8. 9. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Only use attachments/accessories specified by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods of time. 10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. If you are experiencing problems with this product, contact TEAC for a service referral. Do not use the product until it has been repaired. CAUTION Do not expose this apparatus to drips or splashes. Do not place any objects filled with liquids, such as vases, on the apparatus. For European Customers Disposal of electrical and electronic equipment

(a) All electrical/electronic equipment and waste batteries/accumulators should be disposed of separately from the municipal waste stream via collection facilities designated by the government or local authorities.

(b) By disposing of electrical/electronic equipment and waste batteries/accumulators correctly, you will help save valuable resources and prevent any potential negative effects on human health and the environment.

(c) Improper disposal of waste electrical/electronic equipment and batteries/

accumulators can have serious effects on the environment and human health because of the presence of hazardous substances in the equipment.

(d) The Waste Electrical and Electronic Equipment (WEEE) symbols, which show wheeled bins that have been crossed out, indicate that electrical/

electronic equipment and batteries/accumulators must be collected and disposed of separately from household waste.

(e) Return and collection systems are available to end users. For more detailed information about the disposal of old electrical/electronic equipment and waste batteries/ accumulators, please contact your city office, waste disposal service or the shop where you purchased the equipment. CAUTION IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT THE STORE WHERE YOU PURCHASED THE UNIT FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. Wireless equipment precautions Compliance of radio transmitter and interference This product has the function of broadband transmitter using 2.4GHz Band. Use frequency range: 2402 MHz - 2480 MHz Maximum output power: Bluetooth Class 2 (less than 2.5 mW) Please use only in the country where you purchased the product. Depending on the country, restrictions on the use of Bluetooth wireless technology might exist. Model for USA This module is granted of Equipment Authorization under the Authority of the Federal Communications Commission. Model for Canada Compliance of radio transmitter This device complies with Innovation, Science and Economic Development Canadas licence-exempt RSSs. 1) This device may not cause interference. 2) This device must accept any interference, including interference that may cause undesired operation of the device. Modle pour le Canada Conformit de lmetteur radio Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Radiation Exposure requirements This equipment meets the regulation, which is recognized internationally, for the case of human exposure to radio waves generated by the transmitter. Statement of compliance for FCC & IC This equipment complies with FCC and ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. ce matriel est conforme aux limites d'exposition aux rayonnements rf de ic noncs dans un autre environnement. ce matriel doit tre install et exploit une distance minimale de 20 cm entre le radiateur et votre corps. Model for EEA (European Economic Area) This equipment complies with EN62479; Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields; the harmonised standard of DIRECTIVE 2014/53/EU. Trademarks o TASCAM is a registered trademark of TEAC Corporation. o The Bluetooth word mark and logo are the property of Bluetooth SIG, Inc. and are used by TEAC Corporation with permission. o Other company names, product names and logos in this document are the trademarks or registered trademarks of their respective owners. Precautions for placement and use o The operating temperature range of this unit is 040 C. o Do not install this unit in the following types of locations. Doing so could make the sound quality worse or cause malfunction. Places with significant vibrations Next to a window or in another location exposed to direct sunlight Near heaters or other extremely hot places Extremely cold places Very humid or poorly ventilated places Very dusty places o To enable good heat dissipation, do not place anything on top of the unit. o Do not place this unit on top of a power amplifier or other device that generates heat. Beware of condensation Condensation could occur if the unit is moved from a cold place to a warm place, it is used immediately after a cold room has been heated or it is otherwise exposed to a sudden temperature change. To prevent this, or if this occurs, let the unit sit for one or two hours at the new room temperature before using it. Cleaning the unit Use a dry soft cloth to wipe the unit clean. Do not wipe with chemical cleaning cloths, thinner, alcohol or other chemical agents. Doing so could damage the surface or cause discoloration. Bluetooth ATTENTION The Bluetooth function of this unit is not guaranteed to enable connection or operation with all Bluetooth devices. Transmission security This unit supports security functions during Bluetooth transmission in accordance with the Bluetooth standard specifications, but it does not guarantee the privacy of such transmissions. TEAC CORPORATION will bear no responsibility should an information leak occur during transmission by Bluetooth. Using the TEAC Global Site You can download updates for this unit from the TEAC Global Site:

https://teac-global.com/

In the TASCAM Downloads section, select the desired language to open the Downloads website page for that language. Product registration Customers in the USA, please visit the following TASCAM website to register your TASCAM product online. https://tascam.com/us/

About TASCAM customer support service TASCAM products are supported and warrantied only in their country/region of purchase. To receive support after purchase, on the TASCAM Distributors list page of the TEAC Global Site (https:// teac-global.com/), search for the local company or representative for the region where you purchased the product and contact that organization. When making inquiries, the address (URL) of the shop or web shop where it was purchased and the purchase date are required. Moreover, the warranty card and proof of purchase might also be necessary.

* The transmission distance is only an estimate and might vary depending on the surrounding environment and radio wave conditions. Other Dimensions Weight

*.* g

**.* **.* **.* mm (W x H x D, including protrusions) Operating temperature range 040 C (32 - 104F) o Specifications and external appearance might be changed without notification to improve the product. Antenna Informatma Frequency range: 2400-2483.5 MHz Input impedance: 50 OHM Standing wave ratio: < 2.0 Gain: 0 dbi Polarization: vertical Directionality: Omni-directional o Antenna TypePCB Antenna 1) lappareil ne doit pas produire de brouillage;

2) lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage Bluetooth est susceptible den compromettre le fonctionnement. Bluetooth version: v5.0 (Bluetooth Dual mode) Specifications Transmission distance: About 10 m*

Frequency range used: 2.4GHz band FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End usersmust follow the specific operating instructions for satisfying RF exposure compliance. Note 1: Any modifications made to the module will void the Grant of Certification, this module is limited to OEMinstallation only and must not be sold to end-users, end-

user has no manual instructions to remove or install thedevice, only software or operating procedure shall be placed in the end-user operating manual of final products. Note 2: Additional testing and certification may be necessary when multiple modules are used. Note 3: To ensure compliance with all non-transmitter functions the host manufacturer is responsible for ensuringcompliance with the module(s) installed and fully operational. For example, if a host was previously authorized asan unintentional radiator under the Declaration of Conformity procedure without a transmitter certified moduleand a module is added, the host manufacturer is responsible for ensuring that the after the module is installed andoperational the host continues to be compliant with the Part 15B unintentional radiator requirements. Since thismay depend on the details of how the module is integrated with the host. Note 4: To ensure compliance with all non-transmitter functions the host manufacturer is responsible for ensuringcompliance with the module(s) installed and fully operational. For example, if a host was previously authorized asan unintentional radiator under the Declaration of Conformity procedure without a transmitter certified moduleand a module is added, the host manufacturer is responsible for ensuring that the after the module is installed andoperational the host continues to be compliant with the Part 15B unintentional radiator requirements. Since thismay depend on the details of how the module is integrated with the host Note 5: the label on the final system must be labeled with Contains FCC ID: XEG-AKBT10&IC:1559C-AKBT10 orContains transmitter module FCC ID: XEG-

AKBT10&IC:1559C-AKBT10.

TEAC Corporation Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: XEG-AKBT10 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description File Name Block SCH Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, We also requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. File Name User manual External Photos Internal photos Setup photo Exhibit Type Manual External Photos Internal photos Setup photo Sincerely, Akira Sekiguchi 2021-06-17 Rev 11/20/07

TEAC Corporation

(Date) 6/17/2021

(Bluetooth Adaptor) FCC ID : XEG-AKBT10 is seeking FCC Authorization as a check one) The EUT meets the requirements for check one) as detailed in KDB 996369. Compliance to each of the requirements is described below:

Single Modular transmitter /

Single Modular approval /

Single Limited Modular Approval (Please Single Limited Modular Approval (please Item Modular requirement Yes No Please provide a detailed explanation if the answer is No. Have its own RF shielding 1 2 3 4 5 6 7 8 Note:

Have buffered modulation/data inputs (if such inputs are provided) The modular transmitter must have its own power supply regulation. Meet the antenna requirements of section 15.203 Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data input/output lines must be connected to the module but, the module must not be inside another case during testing. Be labeled with its own FCC ID number, and if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. The modular transmitter is manufactured so that the user can not influence the operation of the transmitter that will operate outside of the scope of the regulations. Address compliance with the Commission`s RF exposure limits in Sections 1.1310 and 2.1093.

(1) LMA may be granted when one or more of the requirements in the table above cannot be demonstrated. LMA will also be issued in those instances where applicants can demonstrate that they will retain control over the final installation of the device, such that compliance of the end product is assured. In such cases, an operating condition on the LMA for the module must state that the module is only approved for use when installed in devices produced by a specific manufacturer. When LMA is sought, the application for equipment certification must specifically state how control of the end product into which the module will be installed, and will be maintained, such that full compliance of the end product is always ensured.

(2) Please provide Clear and specific instructions describing the conditions, limitations and procedures for third-parties to use and/or integrate the module into a host device.

(3) For non-Software Defined Radio transmitter modules where software is used to ensure compliance of the device, technical description of how such control is implemented to ensure prevention of third party modification must be provided (see KDB 594280). Note 1: Compliance of a module in its final configuration is the responsibility of the applicant. A host device will not be considered certified if the instructions regarding antenna configuration provided in the original description, of one or more separately certified modules it contains, were not followed. Example: A separately certified low-power transceiver module using Bluetooth technology which is housed in a desktop computer, laptop or peripheral does not require the overall system to be recertified, if the desktop computer, laptop or peripheral, as a stand-

alone unit, complies with all applicable technical standards. Akira Sekiguchi 2021-06-17

TEAC Corporation Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2021-06-17 SUBJECT: FCC Application for (FCC ID: XEG-AKBT10) To Whom It May Concern:

We, the undersigned, hereby authorize Sam Lv at EMTEK(DONGGUAN) CO., LTD. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK(DONGGUAN) CO., LTD.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Sincerely, Akira Sekiguchi 2021-06-17