User Manual Bluetooth Car kit Model: BT-X22 Product Overview 1 Mute 2 Working indicator a. During phone call, short press to enter mute mode, after that, you can hear talking from others while others cannot hear you voice. b. During phone call, long press to transfer call to phone, long press to transfer call to car kit. a. Turn on car kit, it searches last paired Bluetooth device, blue LED blinks slowly. b. Long press POWER button to enter pairing mode, blue LED and red LED blink alternatively. When its connected, blue LED blinks slowly. c. While car kit is playing music, blue LED blinks slowly. d. Under charging mode, red LED turns solid and turns off after car kit is fully charged. 3 Forth/Volume up 4 Back/Volume down 5 Power on/off, Hands-free, Play, Pause a. Short press to move to next track;
b. Long press to increase volume. a. Short press to go back to last track;
b. Long press to decrease volume. a. Press 5S to power on car kit, blue and red LED blink alternatively. b. Under Bluetooth mode, short press to play or pause music. If there is incoming calls, short press to receive or end calls; long press to reject. 6 Microphone 7 Mini USB charging connector Pair Two Phones Bluetooth car kit enters standby mode after pairing with the first cell phone. At the moment, keep pressing POWER button for 3S. Blue LED and red LED blink alternatively, indicating pairing mode. Pair the second phone like before. Then turn off car kit, you can see Bluetooth is disconnected on your phones. Later turn on car kit again, it connects two cell phones automatically. Bluetooth mode Turn on Bluetooth car kit, it searches last paired device automatically. It enters pairing mode if it fails to connect. Turn on Bluetooth of cell phone to search car kit. Music streams after pairing successfully. Should someone calls to receive or end phone call, long press to reject. While answering phone call, long press you, short press MUTE to transfer talking to phone, long press again to transfer call to car kit. Charging Plug charging cable into mini USB slot of the speaker, USB slot of PC or other USB slot of chargers to get charged. When the speaker is being charged, indicator light turns red. Once it is fully charged, indicator light turns off.
(Wed suggest users turning off speaker while charging. It takes longer time to get completely charged if the speaker works when being charged.) Warnings 1. If the car kit cannot be turned on after pressing the POWER key, or it turns off on turning on, user shall check whether it has power. If its out of power, please get it charged and try again later. 2. Please get car kit charged in DC 5V slot. It would make car kit fail to work or even destroy it if its not charged in recommended DC 5V slot. 3. Please charge the model once a week to lengthen battery life. 4. If Bluetooth device of Mobile Phone, PC etc fails to link to the speaker or if fails to playing music after being connected, the user shall check if he/she enters the correct PIN code or if Bluetooth device of his/her Mobile Phone, PC etc supports A2DP. 5. This model is not water resistant, keep it from water and humidity. FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.