FCC ID: Z23025A TP-7

PACKAGING TP7 ARTWORK FOR CERTIFICATION AT SGS 2023-03-09 SCALE 1:2 packaging:

plastic bag front 2 2 8 1 3 0 0 3 2

8 1 0 K R O W T R A 212 PACKAGING TP7 ARTWORK FOR CERTIFICATION AT SGS 2023-03-09 SCALE 1:2 packaging:

plastic bag back A R T W O R K 8 2 2 212

TP7 field tape recoder user guide V.1.0.0 warnings and important notes caution warranty and return policy notice. read this rst. download as PDF before connecting this unit to other devices, turn off the power to all units. this will help prevent malfunctions and/or damage to speakers or other devices. if you need to connect/disconnect wires during use, always make sure to connect the cable to the TP7 first. never connect the 3.5 mm plug going from the TP7's inputs or outputs to a microphone input with active phantom power. this could damage the TP7. be sure to charge the unit using only 5V usb power, such as that from the usb ports of a computer, or by using a dedicated usb charger. make sure to read the regulatory statements here make sure you always have the TP7 placed so it is level and sure to remain stable. risk of explosion or fire if the battery is replaced with incorrect type or the unit is perforated. use your TP7 where the ambient temperature is between 0 C and 50 C (32 F and 122 F) and the relative humidity is lower than 95 %. never install or use the unit in any of the following locations:

do not try to charge or use a unit with a seemingly damaged battery. only a battery supplied by teenage engineering and installed by qualified personnel should be used. the TP7 is fully factory tested and comes with a 12 month (from purchase date) warranty. this does not include malfunction due to misuse of the device, such as being dropped, crushed or used in an application of inappropriate voltages to the device's connectors or improperly designed or executed modifications. in particular, you are the sole responsible for damage caused by a charging method other than 5V usb power. humid environments or baths and washrooms. safety-critical applications. nuclear facilities and weapons systems. aerospace applications or environments for automotive installations disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion. the warranty does not cover shipping charges. make sure to read the terms and conditions here. leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas. to prevent possible hearing damage, do not listen at high sound levels for long periods. store small parts out of the reach of children and infants. if accidentally swallowed, contact an emergency medicine doctor immediately. what's in the box check that the following items are included when you open the box TP7 unit user's guide 6.3 mm adapter usb-c cable hardware back to index made in durable aluminium, with pu syntethic leather backing and custom made wheel and rocker. the main control and navigation centers around the wheel, with all functions displayed on the compact oled screen. this guide takes you through the layout, connectivity, various modes and general functions of your TP7.

[guide here]

technical specs TP7 highlights electrical characteristics handling ultra-portable pro recorder 3 trrs stereo input/headset mini jacks 1 main / headphones output usb audio / midi midi over usb-c and bluetooth le 8 hour rechargeable battery 128x64 pixel monochrome display connect to iPhone, lightning cable inputs and outputs 24-bit/96 kHz usb audio interface 3 stereo two-way jack input /

headset connectors 1 stereo headphones connectors bluetooth low energy radio interface stereo or mono for each input two-way jacks:

input impedance 9.5 kOhm analog gain 0 - 42 dB, max level 8 dBu, 2 Vrms SNR ~ 105 dBA headset:

max level 2 dBu, 1 Vrms SNR 110 dBA microphone SNR 98 dBA headphone output:

max level 8 dBu, 2 Vrms SNR 120 dBA ambient working temperature:

0-50C (32-122F) ambient storage temperature:

0-30C (32-86F) clean the shell of the unit with a microfibre cloth. use pressurized air to remove dust from the faders. to keep the battery healthy, the unit should be charged at least every 6 months. if not used for a long time, it may not charge again. regulatory back to index back to index ised regulatory compliance conformit rglementaire d'ised eu compliance this device contains licence-exempt transmitters that comply with innovation, science and economic development canada's licence-exempt rss(s). operation is subject to the following two conditions l'metteur exempt de licence contenudans le prsent appareil est conforme aux cnr d'innovation, sciences et dveloppement conomique canada applicables aux appareils radio exempts de licence. l'exploitation est autorise aux deux conditions suivantes:

hereby, teenage engineering declares that the radio equipment type TP7 is in compliance with the CE directive. the eu declaration of conformity is availablehere

(1) this device may not cause interference.

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

(1) l'appareil ne doit pas produire debrouillage;

(2) l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. this equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. end user must follow the specific operating instructions for satisfying rf exposure compliance. this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. l'utilisateur final doit suivre les instructions spcifiques pour satisfaire les normes. cet metteur ne doit pas tre co-implant ou fonctionner en conjonction avec toute autre antenne ou transmetteur. the portable device is designed to meet the requirements for exposure to radio waves established by ISED. these requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. the highest SAR value reported during product certification for use when properly worn on the body, with 0mm separation, was 0.63W/kg. l'appareil portable est conu pour rpondre aux exigences d'exposition aux ondes radio tablies par l'ISED ces exigences tablissent un SAR limite de 1.6 W/kg en moyenne pour un gramme de tissu organique. la valeur SAR la plus leve signale lors de la certification de produit utiliser lorsqu'il est correctement port sur le corps, avec une sparation de 0 mm, est 0.63W/kg. IC: 9915A-025A IC: 9915A-025A frequency band:

2400 - 2483.5 MHz maximum output power:

10 dBm EIRP uk compliance hereby, teenage engineering declares that the radio equipment type TP7is in compliance with radio equipment regulations 2017. the full text of the UK declaration of conformity is available here recycling electrical and electronic equipment, parts and batteries marked with this crossed-out wheelie bin symbol must not be disposed of with normal household wastage, it must be collected and disposed of separately to protect the environment. this product contains a built in Li Ion battery. regulatory statements teenage engineering TP7 model no: TE025AS001 fcc regulatory compliance this device complies with part 15 of the fcc rules. operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. note: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. these limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. however, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

reorient or relocate the receiving antenna. increase the separation between the equipment and receiver. connect the equipment into an outlet on a circuit different from that to which the receiver is connected. consult the dealer or an experienced radio/TV technician for help. this equipment complies with fcc radiation exposure limits set forth for an uncontrolled environment. end user must follow the specific operating instructions for satisfying rf exposure compliance. this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. the portable device is designed to meet the requirements for exposure to radio waves established by fcc. these requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. the highest SAR value reported during product certification for use when properly worn on the body, with 0mm separation, was 0.63 W/kg. FCC ID: Z23025A

PRODUCT ENGRAVINGS TP7 ARTWORK FOR CERTIFICATION AT SGS 2023-04-24 SCALE 1:1 laser engravings 4.5 0.1 1.9 0.1 1.0 0.1 C 0.1 C GENERATED QR CODE K R A M R E S A L R E W O P W O L 0.1 F F 16 0.1 K R A M R E S A L R E W O P W O L 5.5 0.1 6

Teenage Engineering AB TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: Z23025A To whom it may concern:

Date: 2023-01-13 We, the undersigned, hereby authorize Compliance Certification Services (Kunshan) Inc to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Teenage Engineering AB This authorization is valid until further written notice from the applicant. Print Name: Oscar Ahlgren Title: Head of Development Signature:

On behalf of Company: Teenage Engineering AB Telephone: (46) 8 599 953 72 E-mail: compliance@teenage.engineering

To:

Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 From: Teenage Engineering AB Date: 2023-01-13 Regarding:

Confidentiality Request regarding application for FCC ID: Z23025A LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Tune up procedure The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date whichever is less. If the device is marketed within confidential period, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Print Name: Oscar Ahlgren Title: Head of Development Signature:

On behalf of Company: Teenage Engineering AB Telephone: (46) 8 599 953 72 E-mail: compliance@teenage.engineering

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Teenage Engineering AB Address Grantee Code FCC ID Textilgatan 31 Stockholm 12030 Sweden Z23 Z23025A Authorized Contact Name Oscar Ahlgren Contact Email Contact Phone compliance@teenage.engineering

(46) 8 599 953 72 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1)

(2)

(3) labeling the equipment with the exact FCC ID as specified in this application, compliance statement labeling pursuant to the applicable rules, compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) g) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List

[Teenage Engineering AB] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Teenage Engineering AB] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to 1.50002, as an entity producing covered equipment. Applicant Signature:

Date: 2023-03-07 Print Name:

Oscar Ahlgren Title:

Head of Development QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page of 1 2 Original Issue: Jan. 4, 2021

UNITED STATES DESIGNATED AGENT LETTER Date: 2023.03.27 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name:

Teenage Engineering AB Company Name: Teenage Engineering Inc. Grantee Code:

Z23 FRN:

Contact Name: Jens Rudberg Contact Name:

Oscar Ahlgren Address: 55 Shuman Blvd, Ste 850 Address:

Textilgatan 31 Stockholm 12030 Sweden City/Province/Zip: Naperville, IL 60563 City/Province/Zip: 12030 Telephone: +46 8 599 953 72 Telephone:

(46) 8 599 953 72 Email: compliance@teenage.engineering Email:

compliance@teenage.engineering Applicable Equipment: FCC ID: <Z23025A>

ATTN: Director of Certification:

We, < Teenage Engineering AB > and <Teenage Engineering Inc> understand and acknowledge the applicants consent and the designated agents obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < Teenage Engineering AB > and <Teenage Engineering Inc> acknowledge the applicants acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Oscar Ahlgren Name (Printed): Jens Rudberg Title: Head of Development Title: Treasurer Signature:

Signature: