all | frequencies |
|
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|---|
manuals | photos | labels |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User manual 1 of 3 | Users Manual | 65.59 KiB | January 14 2020 | |||
1 2 3 |
|
User manual 2 of 3 | Users Manual | 1.31 MiB | January 14 2020 | |||
1 2 3 |
|
User manual 3 of 3 | Users Manual | 1.17 MiB | January 14 2020 | |||
1 2 3 |
|
Internal photographs | Internal Photos | 566.42 KiB | January 14 2020 | |||
1 2 3 |
|
External photographs | External Photos | 340.93 KiB | January 14 2020 | |||
1 2 3 |
|
Label | ID Label/Location Info | 73.09 KiB | January 14 2020 | |||
1 2 3 |
|
Label location | ID Label/Location Info | 96.50 KiB | January 14 2020 | |||
1 2 3 |
|
Agent authorisation 1 of 2 | Cover Letter(s) | 278.83 KiB | January 14 2020 | |||
1 2 3 |
|
Agent authorisation 2 of 2 | Cover Letter(s) | 152.86 KiB | January 14 2020 | |||
1 2 3 |
|
Block diagram | Block Diagram | 85.20 KiB | January 14 2020 | |||
1 2 3 |
|
Test report | Test Report | 1.86 MiB | January 14 2020 | |||
1 2 3 |
|
Test set up photographs | Test Setup Photos | 413.83 KiB | January 14 2020 | |||
1 2 3 |
|
Confidentiality request | Cover Letter(s) | 520.37 KiB | January 14 2020 | |||
1 2 3 |
|
Operational description | Operational Description | 87.00 KiB | January 14 2020 | |||
1 2 3 | Parts list | Parts List/Tune Up Info | January 14 2020 | confidential | ||||
1 2 3 | Schematic digram | Schematics | January 14 2020 | confidential |
1 2 3 | User manual 1 of 3 | Users Manual | 65.59 KiB | January 14 2020 |
INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL The following information (in blue) must be included in the end product users manual to ensure continued FCC regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs below must be included in the user's manual.
FCC ID: S6T603 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment.
1 2 3 | User manual 2 of 3 | Users Manual | 1.31 MiB | January 14 2020 |
Eco Oil Monitor User Manual Eco Oil Monitor User Manual Contents 1. 1.1 1.2 2.1 2.2 2.3 2.4 2.5 3.1 3.2 2. 3. 4. Product Information ...................................................................................................................................... 2 Definitions/Glossary .......................................................................................................................... 2 Introduction ....................................................................................................................................... 2 Features and Functions ................................................................................................................................. 4 Features.............................................................................................................................................. 4 Functions ............................................................................................................................................ 4 LED ...................................................................................................................................................... 5 Display Symbols & Indicators......................................................................................................... 5 Display Screens .................................................................................................................................. 7 CURRENT information screens ...................................................................................................................... 7 HISTORICAL information screens .................................................................................................................. 7 Alarms ............................................................................................................................................................. 8 Full Indication .................................................................................................................................... 8 Low Level Indications ........................................................................................................................ 8 Technical Specifications ................................................................................................................................. 8 Tank Size ............................................................................................................................................. 8 Displays............................................................................................................................................... 8 Audible Alarm .................................................................................................................................... 8 Max communication distance .......................................................................................................... 9 Wireless Communications ................................................................................................................ 9 Dimensions (Sensor) .......................................................................................................................... 9 Dimensions (Monitor) ....................................................................................................................... 9 Power Supply ..................................................................................................................................... 9 Mains Power Supply (incl.) for Tekelek Eco Oil Monitor ................................................................ 9 Battery Life ......................................................................................................................................... 9 Max and Min Operation (Sensor) ..................................................................................................... 9 Max and Min Operation (Monitor) .................................................................................................. 9 Hole size for fitting sensor ................................................................................................................ 9 Tekelek sensor battery change ................................................................................................................... 10 General Product safety, care and user guide lines .................................................................................... 10 Troubleshooting ........................................................................................................................................... 11 Notes ............................................................................................................................................................. 12 Warranty ....................................................................................................................................................... 13 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 5. 6. 7. 8. 9. 1 | P a g e 9-5935-02 Eco Oil Monitor User Manual 1. Product Information 1.1 Definitions/Glossary Ullage Outlet Brim-full Tank Capacity Normal Tank Capacity Usable Capacity Matching Days to Empty (DTE) RF KgCO2 SETUP mode LEARN mode NORMAL mode CURRENT information screens HISTORICAL information screens The distance from the sensor to the surface of the liquid in the tank The connection on point from which oil is drawn from the tank to feed the boiler. It is typically located 8cm above the bottom of the tank in one of the sidewalls. Oil below the outlet level is not usable. The maximum amount of liquid that can fit in the tank. The maximum amount to which the tank should be filled according to OFTEC and EN standards. Normally 95%
of the Brim-full capacity. The nominal capacity of the tank minus the amount of oil that is below the outlet point. If the oil level falls to the level of the outlet, the tank is effectively empty. The process of uniquely matching the sensor and the Eco Oil Monitor. A prediction of the number of days in which the oil level will reach the outlet point. The DTE is calculated based on the recent usage patterns. Radio Frequency The tank level measurements are conveyed wirelessly to the Eco Oil Monitor from the sensor using RF transmissions. Kilogrammes of Carbon dioxide. Used to configure the Eco Oil Monitor for the oil tank. Used to match the sensor with the Eco Oil Monitor. For day to day use of the Eco Oil Monitor. This mode displays current and historical information. Screens in NORMAL mode that display information about the current status of the amount of oil remaining in the tank in Litres, as %, and the DTE. Screens in NORMAL mode that display information about the historical usage of oil in terms of Litres, cost and environmental impact. 1.2 Introduction Thank you for selecting the Tekelek Eco Oil Heating Oil Energy Monitor. This revolutionary home energy monitoring system allows todays energy and environmentally conscious consumers to monitor and track their heating oil consumption, its costs, and the heating systems environmental impact through carbon emissions, on a daily, weekly, monthly, and annual basis. The Tekelek Eco Oil product from Tekelek Europe Ltd consists of the Tekelek Sensor and the Tekelek Eco Oil Monitor. The Tekelek Sensor is easily installed on your oil storage tank to measure the level of the oil. It transmits the oil level information wirelessly to the Tekelek Eco Oil Monitor which may be located in a convenient location inside your home. The Tekelek Sensor uses ultrasonic technology to measure the distance from the sensor on top of the tank to the surface of the liquid in your oil tank. As the amount of oil in your tank decreases, the distance measured increases accordingly. The distance information or ullage is transmitted wirelessly to the Tekelek Eco Oil Monitor. Litres and % fuel Once programmed with information about your oil tanks shape and size, the Tekelek Eco Oil Monitor calculates and displays the amount of fuel remaining in your tank in litres or as a percentage of the tank capacity. In addition (as oil is consumed over time) the Tekelek Eco Oil Monitor calculates and displays usage information including the average amount of litres used per day, per week, over the last 30 days, and over the last 365 days. 2 | P a g e 9-5935-02 Eco Oil Monitor User Manual Days to Empty (DTE) As the Tekelek Sensor continuously measures and transmits the oil level, the Tekelek Eco Oil Monitor retains this information allowing it to learn historical heating system usage patterns and so predict the Days to Empty for your home. With this information you can ensure that you order your oil at the correct time not too soon, and more importantly, not too late. Costs By entering the cost you pay for your oil during the setup process of your Tekelek Eco Oil Monitor and subsequently when you take deliveries of oil (if the price has changed), the Tekelek Eco Oil can present your oil usage in terms of its costs, i.e. average cost per day and per week, and the cost for the usage over the last 30 days and 365 days. Environment Similarly, the Tekelek Eco Oil Monitor can display your oil usage in terms of the associated production of CO 2 emissions, as the equivalent quantity of KgCO2 emitted per day, per week, the last 30 days and 365 days. Installation The Tekelek Sensor fits into the standard 32mm aperture found on most modern oil storage tanks and is suitable for use with almost any plastic or metal tank up to 3m tall, including Bunded and Single Skin Oil tanks. If your tank is a bunded tank, ensure that you mount the Tekelek Sensor on the inner tank. As part of the installation the Tekelek Sensor and Monitor are synchronised together to ensure there is no interference from other nearby sensors. 3 | P a g e 9-5935-02 Eco Oil Monitor User Manual 2. Features and Functions 2.1 Features 1 LCD Display 2 MODE key 3 DOWN key 4 ENTER key 5 UP key 6 SETUP key 11 Error code information 12 Power/data cable 13 Manufacturing information 14 Location feature (see Installation Guide) 15 USB connector 16 Mains power plug 7 Alarm Red LED 17 Tekelek Eco Oil Transmitter 8 Screw mount hanger 18 Self-tapping screws x 2 9 Beeper aperture 19 Weather seal (Gasket) 10 RESET button access 20 Tekelek Eco Oil Sensor oil level display 2.2 Functions MODE When in NORMAL mode press MODE to move between the current and the historical information screens. Press UP to move between screens when in NORMAL mode. Use it to increase a setting when in SETUP mode. ENTER The ENTER key is used only in SETUP mode. It is used to save the settings shown on the display and then move automatically to the next SETUP number. Press DOWN to move between screens when in NORMAL mode. Use it to decrease a setting when in SETUP mode. SETUP Press SETUP for 3 seconds to enter SETUP. When in SETUP, press SETUP to exit from SETUP mode.
When in NORMAL mode, by pressing together UP and DOWN and releasing, the screen will flash the current tank configuration for 20 seconds. Press any key to return to NORMAL mode. 4 | P a g e 9-5935-02 Eco Oil Monitor User Manual 2.3 LED The red light above the ENTER key flashes when there is an Alarm condition (see 3. Alarms) and on receiving data from the Tekelek Sensor. 2.4 Display Symbols & Indicators The Tekelek Eco Oil Monitor contains a display that conveys a variety of information during normal use and during its initial setup and configuration for use with your oil tank. The display contains three sections (1, 2,
& 3) as indicated in the diagram. 1 - Used for SETUP and displays SETUP number, and in normal use displays room temperature. 2 - Tank information including a visual bar-graph of the oil level in the tank. 3 - Information about the remaining usable oil in litres or as a %, the Days to Empty, and the average and cumulative use of oil in litres, cost and KgCO2. Time is also displayed here. Tekelek Eco Oil Monitor and Sensor Display Symbol reference TANK TYPE Indicates the tank type being selected. A,B,C A, B, C are types of tank shapes (see Installation Guide). ROOM TEMPERATURE The value displayed is the room temperature. Numeric display - shows the room temperature in normal mode e.g. 20. Shows the SETUP mode number when in SETUP mode, e.g. SETUP mode 3 The value displayed is temperature in degrees Celsius/Fahrenheit. The value displayed is in centimetres/inches. SETUP mode is active. 1 20 3 C & F cm\inch SETUP 5 | P a g e 9-5935-02 Eco Oil Monitor User Manual H W The value displayed is the tank height. The value displayed is the tank width. Monitor Display:
Bar graph indicator of liquid level - each bar represents 10% of tank height. Tekelek Eco Oil Sensor Display:
Tanks 1m/3.3ft. in height or greater - each bar represents 1/10th of the top 1m/3.3ft of the tank. Tanks less than 1m/3.3ft. in height - each bar represents 1/10th of 1m/3.3ft Full Indicates the Full level of the bar graph indicator. Liquid Level Indicates the bar graph is showing the liquid level. EMPTY Indicates the Empty level of the bar graph indicator. 2 BUND ALARM When flashing, there has been a leak into the Bund (double skinned tanks). The 10 bars and the RED LED will also be flashing at the same time. TANK LOW BATTERY The sensor battery needs to be changed. Flashing in the monitorThe liquid level in the tank is less than 14cm. Flashing in the sensorThe liquid level in the tank is less than 10% of the tank height. Flashing There is a problem with the RF signal from the sensor. Refer to Troubleshooting for more details. Static Attempt to change the monitor system of measurement (SETUP mode 3) with the risk of losing saved data. The temperature of the sensor is measured at 8C or below the information accuracy may be affected. The value displayed is the % of usable oil remaining in the tank. The value displayed is in centimetres/inches The value displayed is in litres/gallons. USB data activity.
cm\inches Ltr\Gal 3 AVERAGE PER DAY AVERAGE PER WEEK The value displayed is the average per day based on the last 7 days' usage. The value displayed is the average per week based on the last 14 days' usage. DAYS TO EMPTY The value displayed is the estimated number of days of oil remaining in the tank. It is computed by dividing the volume of usable oil left in the tank LAST 30 DAYS The value displayed is the estimated usage over the last 30 days. LAST 365 DAYS The value displayed is the estimated usage over the last 365 days. 6 | P a g e 9-5935-02 Eco Oil Monitor User Manual 2.5 Display Screens There are two types of information displayed on the Tekelek Eco Oil Monitor:
CURRENT information screens used in normal mode to show the current status of the oil level in your tank. Change between the Ltr., %, Days to empty, and Clock screens using the and keys. For approximately 1 week after the Tekelek Eco Oil is installed, it collects data so that the Average per day value may be calculated. During this period the screen will flash --- when showing Days to empty. (In the picture, flashing is indicated in red). After this period, the display may continue to show --- (but not flashing). This indicates that a meaningful value could not be calculated. This may occur in periods when there is no (or extremely low) usage. The ---
may be displayed in any of the HISTORICAL information screens under these conditions. This may also happen if the Tekelek Eco Oil Monitor has been unplugged for some time. When sufficient data has been gathered, the screen will revert to normal after a period from a few hours up to a maximum of 1 week. HISTORICAL information screens showing Fuel usage Litres, Fuel usage Cost and Fuel Usage Carbon. Pressing MODE and / accesses these screens. The Tekelek Eco Oil Monitor will automatically return to the CURRENT information screen after 30s with no key presses within the HISTORICAL information screens. The maximum value displayed is 19999. 7 | P a g e 9-5935-02 Eco Oil Monitor User Manual 3. Alarms 3.1 Full Indication When the level in your tank reaches 12 cm from the top of the tank, i.e. from the bottom of the Tekelek Sensor, the main display will show FULL. 3.2 Low Level Indications When the tank level falls to within 14cm of the bottom of the tank the the tank level is such that there is below 10% of the usable volume of oil left in the tank, the CURRENT information screen alternates between showing the Ltr. (or % or DTE) and Lo. If the level, then drops such that there is below 5% of usable oil left:
This continues until there is an oil delivery and the level rises. Lo is displayed constantly on the CURRENT information screens. The monitor beeps 5 times, repeating every hour, i.e. 10:00, 11:00, 12:00, 13:00, 14:00... The RED light flashes. re-fuel symbol will flash. When 4. Technical Specifications 4.1 Tank Size Min. Depth: 0.5m / 20 inch Max. Depth: 3m / 118 inch Max. Tank Volume: 19999Litres / 5,200Gallons 4.2 Displays Multi-function LCD display including:
10 bar-graph level indication on both Tekelek Eco Oil Monitor and Sensor Display of various current and historical values (Tekelek Eco Oil Monitor only) Display control with five control buttons Red LED for low level indication at 5% or less of usable fuel remaining 4.3 Audible Alarm Audible alarm sounds every hour on the hour when the tank level is low 8 | P a g e 9-5935-02 Eco Oil Monitor User Manual 4.4 Max communication distance Typically, up to 500m/1640feet in normal line of sight conditions 4.5 Wireless Communications 915MHz FM transmission (FCC part 15) 433MHz FM transmission (EN300-220) 4.6 Dimensions (Sensor) 140mm x 70mm x 40mm / 5.51 x 2.75 x 1.57 4.7 Dimensions (Monitor) 120mm x 90mm x 50mm / 4.72 x 3.54 x 1.96 4.8 Power Supply Tekelek Sensor3V LiMn cell, CR2450 or CR2430 (Depending on sensor) Tekelek Eco Oil Monitor:
o o Receiver: 5V DC (40mA) Backup battery: 3V LiMn cell, CR2450 or CR2430 4.9 Mains Power Supply (incl.) for Tekelek Eco Oil Monitor North America: 110V +/- 10% 60Hz, meets UL60950-1 Other: 150V-240V, 50-60 Hz, meets EN60950-1
(Eco Oil Monitor use onlynot for use with any other device) 4.10 Battery Life Tekelek Sensor: 5 years (estimated life) Tekelek Eco Oil Monitor Receiver memory back-up battery: 3yr if device is not plugged in Note: The Eco Oil Monitor contains a small battery to keep time during power cuts. If the device is left unpowered for an extended period, then the battery will deplete. 4.11 Max and Min Operation (Sensor) Operating temperature range: -20C/-4F to +60C/140F Operating Humidity: 15 - 95% non-condensing 4.12 Max and Min Operation (Monitor) Operating temperature range: 0C/32F to +50C/122F Operating Humidity: 0 - 95% non-condensing 4.13 Hole size for fitting sensor 32mm diameter 9 | P a g e 9-5935-02 Eco Oil Monitor User Manual 5. Tekelek sensor battery change If the battery in the Tekelek Sensor needs to be changed the display will provide advance warning by showing the TANK LOW BATTERY text below the bar-graph. Remove the Tekelek Sensor from the tank and move to a safe location The battery can be accessed by removing the 4 self-tapping screws from the base of the unit. Remove the old battery noting the orientation (+ mark facing outwards) and replace it with a new battery, 3V. Re-assemble, ensuring the O-ring is undamaged and secured in position. Re-locate the sensor on the tank. There is no need to re-synchronise the sensor with the monitor when the sensor battery is changed. Disposal The crossed-out dustbin on the packaging indicates that this product and its battery shall not be treated as household waste. Proper disposal will help prevent potentially negative consequences for the environment and human health. For more detailed information about recycling of this product or battery, please contact your local recycling centre or the shop where you purchased the product. 6. General Product safety, care and user guide lines To ensure that you use your product correctly and safely, please read the warnings, safety precautions and notes below regarding use of and caring for your Tekelek Eco Oil Monitor and Sensor. Do not use this product where the use of radio frequency products can cause malfunction in the control devices of other equipment i.e. hospitals, aircraft, etc. Do not subject the product to excessive force, shock, dust, temperature or humidity. The LCD panel behind the display lens is made of glass, and may break if the unit is dropped, impacted or subjected to shock. Take special care when handling a damaged display, as the liquid crystals can be harmful to your health. Keep the product away from heat sources i.e. radiators, stoves, heaters, etc. Do not use the Tekelek Eco Oil Monitor in or near water or in high moisture areas i.e. Bathroom Do not tamper with the Tekelek Eco Oil Monitors internal components. This will invalidate the warranty. Do not attempt to repair the product yourself. Contact the retailer or our Customer Service Department. Do not dispose of old batteries as unsorted municipal waste, do so in accordance with your local waste disposal regulations. When disposing of this product do so in accordance with your local waste disposal regulations Do not scratch hard objects against the Tekelek Eco Oil display as this may cause damage Do not replace batteries in a potentially explosive atmosphere. 10 | P a g e 9-5935-02 Eco Oil Monitor User Manual 7. Troubleshooting If the Tekelek Eco Oil Monitor does not receive or cannot understand the RF signal from the Tekelek Sensor, an error message will be displayed on the Tekelek Eco Oil Monitor. The error message appears as an alternating screen showing Err and E:0? where? is a number. Error codes are listed on a label on the rear of your Tekelek Eco Oil Monitor. Error Description To Rectify E01 Received reading is inconsistent
- Check that the sensor is vertical on the tank.
- Check positioning of the sensor (ensure that the sensor is not too close to the tank sides or internal obstructions.
- Ensure that the sensor is not tightly attached to the tank.
- Ensure that the tank is not overfilled and that the bottom of the sensor is clean. E02 Reading not received after 6 hours
- Check that the sensor is within range of the monitor. Try and relocate the monitor to a position that is nearer a window. Remember that the sensor communicates with the monitor using an FM signal and moving the monitor plug from possible metal obstructions can improve the signal.
- Ensure the monitor is not too close to, or obstructed by, other electrical appliances. E03 Reading received but void
- Check positioning of the sensor (ensure that the sensor is not too close to the tank sides or internal obstructions).
- Ensure that the sensor is not too tightly attached to the tank.
- Ensure that the tank is not overfilled i.e. there is a minimum of 120mm/5ins free space between the sensor and oil level.
- Ensure that the bottom of sensor is clean.
- If a bund tank, ensure that the sensor is located on the inner tank. E04 Received Reading greater than tank height
- Check the tank height and ensure that this information is correct on the monitor, press the r and s keys together to view your tank configuration. If height is incorrect, enter the SETUP mode by pressing SETUP for 3 secs, press ENTER until you reach screen 5 and adjust the height using r and s keys. Press ENTER to save. Press SETUP to exit Setup mode. Wait 3 hours for updated readings.
- Check the sensor is vertical and the positioning of the sensor (ensure the sensor is not too close to the tank sides or internal obstructions.
- This is a hardware fault and requires contact with the vendor.
- This is a hardware fault and requires contact with the vendor. Contact Vendor Contact Vendor E05 E06 11 | P a g e 9-5935-02 Eco Oil Monitor User Manual 8. Notes Please retain this product manual and the installation guide. It contains practical instructions, technical specifications and safety precaution warnings you should know about. The maximum displayed value for all measurements and computed values is 19999. If a measurement exceeds this value, the display will flash. This does not affect data calculations or alarm functions. When used according to recommendations, the Tekelek Eco Oil monitors the oil level in your tank and calculates and presents figures relating to the remaining oil, the historical usage, and the related monetary and environmental costs. The Tekelek Eco Oil must not be used as verification of a Weights and Measures certified dispensing meter. Patents pending or covered by one of the following patents: S2003/0882, EP2131164 (A1), US2006261966 (A1), US7277020 (B2), IE20030882 (A2), S2008/0466, US2009/0303059 A1 For correct usage calculation, a minimum of 7 days between tank fills is required. The Tekelek Eco Oil Monitor is intended to be connected to a power source continuously. It contains a small battery to keep time during power cuts. If the Tekelek Eco Oil Monitor is left unpowered for an extended period, then the battery will deplete, and information may be lost. When you are not using your domestic oil heating system, you may unplug the Tekelek Eco Oil and store it until you wish to use your heating again. Its back-up battery and internal clock keep track of the days as they pass. When you next use it, on starting to use your heating again, the Tekelek Eco Oil will continue monitoring your oil usage, and calculating the financial cost and environmental impact. When the Tekelek Eco Oil has been unplugged and is plugged in again, it will start up in Lrn mode. Simply press any key to exit. When you are receiving an oil fill, the Tekelek Sensor cannot receive a reliable echo due to turbulence within the tank and may cause the Tekelek Eco Oil Monitor to temporarily display some error messages. Should the tank be filled above the recommended 95% this will obstruct the sensor signal until the oil level drops below 120mm from the sensor. The sensor will be unable to send accurate readings during this period. The Tekelek Eco Oil owner should note that the first fill amount of oil into a tank will differ from the amount shown on the display. This is due to the fact that the Tekelek Eco Oil Monitor displays the volume of Usable oil available. The Tekelek Eco Oil Monitor in its calculations makes an allowance of 8cm of unusable oil in the bottom of the tank due to the location of the bottom outlet or the top discharge pipe. Not suitable for pressurised containers. Only use on tanks vented to the atmosphere. Only access the Reset Switch if instructed by customer service. Changes in temperature can result in contraction and expansion of the tank and hence can affect the tank capacity. Such changes may affect your readings. You only need to complete this step if there was a gap of more than an hour between completing STEP 2 and STEP 3. To reset the usage calculations, press SETUP for 3 seconds to enter SETUP mode and then press ENTER repeatedly until SETUP 10 is shown. The segments at the bottom of the display will be flashing. Press the ENTER key for 5 seconds. The screen will temporarily show CALC and then returns to showing SETUP 1 - Setting the Time (hrs). Press SETUP to leave SETUP mode. 12 | P a g e 9-5935-02 Eco Oil Monitor User Manual 9. Warranty This product carries a 24-month warranty from date of original purchase from Tekelek against any deficiency or fault in manufacture. This does not affect your statutory rights, or any warranty offered by the seller if different to Tekelek. This warranty does not cover normal wear and tear, damage cause by negligence, accident, improper use or incorrect installation. Any change or modification made by the purchaser or user to the appliance will invalidate the warranty, as would any attempted repair. The warranty applies only when the appliance has been operated in accordance with the instructions and connected to an electricity supply which matches that shown in the manual. The warranty will be rendered invalid if the product is resold by the end user. The product must be used solely for domestic purposes. Tekelek Europe Ltds obligations are limited to the repair, or at its sole discretion, replacement of the unit. The unit should only be returned to Tekelek upon receiving confirmation from Tekelek that the return will be accepted. Tekelek distributors should get in touch in this regard with their normal sales contact at Tekelek. Other parties should only return the product for warranty assessment via the point of original purchase. Tekelek Europe Ltd. and its distributors shall not be liable for indirect or consequential loss or damage resulting from the use of this product. 13 | P a g e 9-5935-02
1 2 3 | User manual 3 of 3 | Users Manual | 1.17 MiB | January 14 2020 |
Eco Water Monitor User Manual Eco Water Monitor User Manual Contents 1. 1.1 1.2 2.1 2.2 2.3 2.4 2.5 2. 3. 4. Product Information ...................................................................................................................................... 2 Definitions/Glossary .......................................................................................................................... 2 Introduction ....................................................................................................................................... 2 Features and Functions ................................................................................................................................. 4 Features.............................................................................................................................................. 4 Functions ............................................................................................................................................ 4 LED ...................................................................................................................................................... 5 Display Symbols & Indicators......................................................................................................... 5 Display Screens .................................................................................................................................. 7 Alarms ............................................................................................................................................................. 8 Technical Specifications ................................................................................................................................. 8 Tank Size ............................................................................................................................................. 8 Displays............................................................................................................................................... 8 Audible Alarm .................................................................................................................................... 8 Max communication distance .......................................................................................................... 8 Wireless Communications ................................................................................................................ 8 Dimensions (Sensor) .......................................................................................................................... 8 Dimensions (Monitor) ....................................................................................................................... 9 Power Supply ..................................................................................................................................... 9 Mains Power Supply (incl.) for Tekelek Eco-Water Monitor .......................................................... 9 Battery Life ......................................................................................................................................... 9 Max and Min Operation (Sensor) ..................................................................................................... 9 Max and Min Operation (Monitor) .................................................................................................. 9 Hole size for fitting sensor: ............................................................................................................... 9 Tekelek sensor battery change ................................................................................................................... 10 General Product safety, care and user guide lines .................................................................................... 10 Troubleshooting ........................................................................................................................................... 11 Notes ............................................................................................................................................................. 12 Warranty ....................................................................................................................................................... 13 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 5. 6. 7. 8. 9. 1 | P a g e 9-5939-02 Eco Water Monitor User Manual 1. Product Information Ullage Outlet Offset Vent 1.1 Definitions/Glossary The distance from the sensor to the surface of the liquid in the tank. The connection point from which water is drawn from your tank. It is typically located 8cm/3ins. above the bottom of your tank in one of the sidewalls. Water below the outlet level is not usable. The height at which the Eco-Water sensor is located or fixed above the top surface of the tank A small chimney-like feature on the top of your tank. It allows the air within the tank to be released when the tank is being filled. Brim-full Tank Capacity The maximum amount of liquid that can fit in the tank. Usable capacity The nominal capacity of the tank minus the amount of water that is below the outlet or discharge point. If the water level falls to the level of the outlet, your tank is effectively empty. Matching The process of uniquely matching the sensor and the monitor. RF Radio Frequency - the tank level measurements are conveyed wirelessly to the monitor from the sensor using RF transmissions. SETUP mode SETUP mode is used to configure the monitor for your water tank. LEARN mode LEARN mode is used to match the sensor with the monitor. NORMAL mode NORMAL mode is for day-to-day use of your monitor - this mode displays tank level as a remaining liquid volume, a % of tank capacity or as the liquid height in the tank. 1.2 Introduction Thank you for selecting the Tekelek Eco-Water. This water tank level monitoring system allows todays environmentally conscious consumer to monitor their water tank level in real time, informing about the remaining volume of water in the tank, so further usage can be planned The Tekelek Eco-Water product from Tekelek Europe Ltd consists of the Tekelek Eco-Water Sensor and the Tekelek Eco-Water Monitor. The Tekelek Eco-Water Sensor is easily installed on your water storage tank to measure the level of water. It transmits the water level information wirelessly to the Tekelek Eco-Water Monitor which may be located in a convenient location inside your home. The Tekelek Eco-Water Sensor uses ultrasonic technology to measure the distance from the Sensor on top of the tank to the surface of the liquid in your water tank. As the amount of water in your tank decreases, the distance measured increases accordingly. The distance information or ullage is transmitted wirelessly to the Tekelek Eco-Water Monitor. 2 | P a g e 9-5939-02 Eco Water Monitor User Manual Volume and %
Once programmed with information about your water tanks shape and size, and the mounting location of the Tekelek Eco-Water Monitor above the tank, the Tekelek Eco-Water Monitor calculates and displays the amount of water remaining in your tank in litres or Metric or US units gallons* as a percentage of the tank capacity.
*Tank capacity and remaining water volume are displayed in Gallons in the USA, and in Litres else-where. Water Height As the Tekelek Eco-Water Sensor continuously measures and transmits the water level, the Tekelek Eco-
Water Monitor conveniently presents the height of the water level in your tank in cm or inches**.
** Tank dimensions and water level height are displayed in inches in the USA, and in cm elsewhere. Installation The Tekelek Eco-Water Sensor fits into 32mm hole found on many water storage tanks and is suitable for use with almost any plastic or metal tank up to 3m tall, it may also be easily installed on tanks with pre-threaded holes by using the supplied multi-thread mounting adaptor which has threads compatible with 2, 1.5, and 1.25 NPT/BSP threaded apertures. If desired it may also be mounted on a fixture above the storage tank. 3 | P a g e 9-5939-02 Eco Water Monitor User Manual 2. Features and Functions 2.1 Features 1 LCD Display 2 MODE key 3 DOWN key 4 ENTER key 5 UP key 6 SETUP key 11 Error code information 12 Power/data cable 13 Manufacturing information 14 Location feature (See Installation Guide) 15 USB connector 16 Mains power plug 7 Alarm Red LED 17 Tekelek Eco Water Sensor 8 Screw mount hanger 18 Self-tapping screws x 2 9 Beeper aperture 19 Weather seal (Gasket) 10 RESET button access 20 Tekelek Eco Water Sensor Water level display 2.2 Functions MODE When in NORMAL mode press MODE to move between the current and the historical information screens. Press UP to move between screens when in NORMAL mode. Use it to increase a setting when in SETUP mode. ENTER The ENTER key is used only in SETUP mode. It is used to save the settings shown on the display and then move automatically to the next SETUP number. Press DOWN to move between screens when in NORMAL mode. Use it to decrease a setting when in SETUP mode. SETUP Press SETUP for 3 seconds to enter SETUP. When in SETUP, press SETUP to exit from SETUP mode.
When in NORMAL mode, by pressing together UP and DOWN and releasing, the screen will flash the current tank configuration for 20 seconds. Press any key to return to NORMAL mode. 4 | P a g e 9-5939-02 Eco Water Monitor User Manual 2.3 LED The red light above the ENTER key flashes when there is an Alarm condition (see 3. Alarms) and on receiving data from the Tekelek Sensor. 2.4 Display Symbols & Indicators The Tekelek Eco Water Monitor contains a display that conveys a variety of information during normal use and during its initial setup and configuration for use with your water tank. The display contains three sections (1, 2, & 3) as indicated in the diagram. 1 - Used for SETUP and displays SETUP number, and in normal use displays room temperature. 2 - Tank information including a visual bar-graph of the water level in the tank. 3 - Information about the remaining usable water in litres/Gals or as a %, the Days to Empty, and the average and cumulative use of water in litres/Gals. Time is also displayed here. Tekelek Eco Water Monitor and Sensor Display Symbol reference TANK TYPE Indicates the tank type being selected. A,B,C A, B, C are types of tank shapes. (See Installation Guide) ROOM TEMPERATURE The value displayed is the room temperature. Numeric display - shows the room temperature in normal mode e.g. 20. Shows the SETUP mode number when in SETUP mode, e.g. SETUP mode 3 The value displayed is temperature in degrees Celsius/Fahrenheit. The value displayed is in centimetres/inches. SETUP mode is active. 1 20 3 C & F cm\inch SETUP 5 | P a g e 9-5939-02 Eco Water Monitor User Manual H W The value displayed is the tank height. The value displayed is the tank width. Monitor Display:
Bar graph indicator of liquid level - each bar represents 10% of tank height. Tekelek Eco Water Sensor Display (If equipped with a display):
Tanks 1m/3.3ft. in height or greater - each bar represents 1/10th of the top 1m/3.3ft of the tank. Tanks less than 1m/3.3ft. in height - each bar represents 1/10th of 1m/3.3ft Full Indicates the Full level of the bar graph indicator. Liquid Level Indicates the bar graph is showing the liquid level. EMPTY Indicates the Empty level of the bar graph indicator. 2 BUND ALARM When flashing, there has been a leak into the Bund (double skinned tanks). The 10 bars and the RED LED will also be flashing at the same time. TANK LOW BATTERY The sensor battery needs to be changed. Flashing near empty symbol in the monitor The remaining liquid level in the tank is at 6cm/2.36inches or below of the tank outlet height. Flashing near empty symbol in the sensor The remaining liquid level in the tank is at 10% or below the tank height. Flashing There is a problem with the RF signal from the sensor. Refer to Troubleshooting for more details. Static Attempt to change the monitor system of measurement (SETUP mode 3) with the risk of losing saved data. The temperature of the sensor is measured at 8C or below the information accuracy may be affected. The value displayed is the % of usable water remaining in the tank. The value displayed is in centimetres/inches The value displayed is in litres/gallons. USB data activity.
cm\inches 3 Ltr\Gal 675 Numeric display used to show numeric values and the time. 6 | P a g e 9-5939-02 Eco Water Monitor User Manual 2.5 Display Screens Information screens: Change between Ltr or Gal (depending on units setting), %, Liquid height and Clock display screens using the r and s keys. Units in EU (Metric):
Units in USA (United States Customary System):
Eco-Water Monitor display During use the Tekelek Eco Water sensor takes a level measurement twice a minute and sends measurement information to the Eco Water monitor every 30 minutes. At the Eco Water monitor the level information is presented as the remaining volume or as a % of the tank capacity or as the height of the liquid in the tank. The Eco Water sensor continuously checks each new measurement against previous measurements and if it detects a significant step change in the level measurement it will increase the rate at which it sends new measurements to the Eco Water monitor to faster than once a second. The Eco Water monitor checks that each measurement it receives is lower than tank height plus the offset and higher than the sensor blind zone, in order to help ensure that the measurements presented are valid. If this requirement is not met, it may temporarily display --- to indicate that is uncertain about the validity of the measurement information. 7 | P a g e 9-5939-02 Eco Water Monitor User Manual 3. Alarms Low Level Indication When the tank level falls to <6cm/2.36inches of the bottom of the tank the near-
empty symbol will flash (see diagram above). When the tank level is such that there is below 10% of the usable volume of liquid left in the tank, the screen alternates between showing the remaining volume in Ltr.
/ Gal. (or % or liquid height) and Lo. High Level Indication When the tank rises to within 12cm/4.7 inches OR when the tank level is such that there is above 90% of the usable volume of the liquid in the tank, the screen alternates between showing the volume in Ltr/Gal (or % of liquid height) and Full. The Red LED will also flash under these conditions. Alarm Indication If the Alarm indication is set to ON in Setup mode 10 ( the default is OFF) then an audible alarm indication is provided when the High Level Indication conditions describe above are fulfilled by the monitor beeping 5 times per hour at the top of the hour, repeating every hour, i.e. 10:00,11:00,12:00,13:00,14:00... 4. Technical Specifications 4.1 Tank Size Min. Depth: 0.5m / 20 inch Max. Depth: 3m / 118 inch Max. Tank Volume: 19999Litres / 5,200Gallons 4.2 Displays Multi-function LCD display including:
10 bar-graph level indication on both Tekelek Eco-Water Monitor and Sensor*
Display control with five control buttons Red LED for high tank level indication 4.3 Audible Alarm Audible alarm sounds when the tank is >90% full or the level is within 12cm / 4.7 of the top of the tank. 4.4 Max communication distance Typically, up to 500m/1640feet in normal line of sight conditions 4.5 Wireless Communications 915MHz FM transmission (FCC part 15) 433MHz FM transmission (EN300-220) 4.6 Dimensions (Sensor) 140mm x 70mm x 40mm / 5.51 x 2.75 x 1.57 8 | P a g e 9-5939-02 Eco Water Monitor User Manual 4.7 Dimensions (Monitor) 120mm x 90mm x 50mm / 4.72 x 3.54 x 1.96 4.8 Power Supply
- Tekelek Eco-Water Sensor3V LiMn cell, CR2450 or CR2430 (Depending on sensor)
- Tekelek Eco-Water Monitor:
- Receiver: 5V DC (40mA)
- Backup battery: 3V LiMn cell, CR2450 or CR2430 4.9 Mains Power Supply (incl.) for Tekelek Eco-Water Monitor North America: 110V +/- 10% 60Hz, meets UL60950-1 Other: 150V-240V, 50-60 Hz, meets EN60950-1 4.10 Battery Life Tekelek Eco-Water Sensor: 5 years (estimated life) Tekelek Eco-Water Monitor Receiver memory back-up battery: 3yr if device is not plugged in**
4.11 Max and Min Operation (Sensor) Operating temperature range: -20C/-4F to +60C/140F Operating Humidity: 15 - 95% non-condensing 4.12 Max and Min Operation (Monitor) Operating temperature range: 0C/32F to +50C/122F Operating Humidity: 0 - 95% non-condensing 4.13 Hole size for fitting sensor:
32mm/1.25inch diameter
* The Tekelek Eco Level Sensor and Tekelek Eco-Water Monitor bar-graph displays may differ (see Display symbol reference table).
** This device contains a small battery to keep time during power cuts. If the device is left unpowered for an extended period, then the battery will deplete. 9 | P a g e 9-5939-02 Eco Water Monitor User Manual 5. Tekelek sensor battery change If the battery in the Tekelek Sensor needs to be changed the display will provide advance warning by showing the TANK LOW BATTERY text below the bar-graph. Remove the Tekelek Sensor from the tank and move to a safe location The battery can be accessed by removing the 4 self-tapping screws from the base of the unit. Remove the old battery noting the orientation (+ mark facing outwards) and replace it with a new battery, 3V. Re-assemble, ensuring the O-ring is undamaged and secured in position. Re-locate the sensor on the tank. There is no need to re-synchronise the sensor with the monitor when the sensor battery is changed. Disposal The crossed-out dustbin on the packaging indicates that this product and its battery shall not be treated as household waste. Proper disposal will help prevent potentially negative consequences for the environment and human health. For more detailed information about recycling of this product or battery, please contact your local recycling centre or the shop where you purchased the product. 6. General Product safety, care and user guide lines To ensure that you use your product correctly and safely, please read the warnings, safety precautions and notes below regarding use of and caring for your Tekelek Eco-Water Monitor and Sensor. Do not use this product where the use of radio frequency products can cause malfunction in the control devices of other equipment i.e. hospitals, aircraft, etc. Do not subject the product to excessive force, shock, dust, temperature or humidity. The LCD panel behind the display lens is made of glass, and may break if the unit is dropped, impacted or subjected to shock. Take special care when handling a damaged display, as the liquid crystals can be harmful to your health. Keep the product away from heat sources i.e. radiators, stoves, heaters, etc. Do not use the Tekelek Eco-Water Monitor in or near water or in high moisture areas i.e. Bathroom Do not tamper with the Tekelek Eco-Water Monitors internal components. This will invalidate the warranty. Do not attempt to repair the product yourself. Contact the retailer or our Customer Service Department. Do not dispose of old batteries as unsorted municipal waste, do so in accordance with your local waste disposal regulations. When disposing of this product do so in accordance with your local waste disposal regulations Do not scratch hard objects against the Tekelek Eco-Water display as this may cause damage Do not replace batteries in a potentially explosive atmosphere. 10 | P a g e 9-5939-02 Eco Water Monitor User Manual 7. Troubleshooting If the Tekelek Eco-Water Monitor does not receive or cannot understand the RF signal from the Tekelek Eco-
Water Sensor, an error message will be displayed on the Tekelek Eco-Water Monitor. The error message appears as an alternating screen showing Err and E:0? where? is a number. Error codes are listed on a label on the rear of your Tekelek Eco-Water Monitor. Error Description To Rectify E01 Received reading is inconsistent
- Check that the sensor is vertical on the tank.
- Check positioning of the sensor (ensure that the sensor is not too close to the tank sides or internal obstructions.
- Ensure that the sensor is not tightly attached to the tank. It should be attached such that it is snig against the supplied gasket.
- Ensure that the tank is not overfilled and that the bottom of the sensor is clean. E02 Reading not received after 6 hours
- Check that the sensor is within range of the monitor. Try and relocate the monitor to a position that is nearer a window. Remember that the sensor communicates with the monitor using an FM signal and moving the monitor plug from possible metal obstructions can improve the signal.
- Ensure the monitor is not too close to, or obstructed by, other electrical appliances.
- Check positioning of the sensor (ensure that the sensor is not too close to the tank sides or internal obstructions). E03 Reading received but void
- Ensure that the sensor is not too tightly attached to the tank.
- Ensure that the tank is not overfilled i.e. there is a minimum of 120mm/4.7inches free space between the sensor and liquid level.
- Ensure that the bottom of sensor is clean.
- If a bunded or double skinned tank, ensure that the sensor is located on the inner tank.
- Check the tank height and ensure that this information is correct on the monitor, press the r and s keys together to view your tank configuration. If height is incorrect, enter the SETUP mode by pressing SETUP for 3 secs, press ENTER until you reach screen 5 and adjust the height using r and s keys. Press ENTER to save. Press SETUP to exit Setup mode. Wait 3 hours for updated readings.
- Check the sensor is vertical and the positioning of the sensor (ensure the sensor is not too close to the tank sides or internal obstructions.
- This is a potential hardware fault and requires contact with the vendor.
- This is a potential hardware fault and requires contact with the vendor. E04 Received reading greater than tank height E05 E06 Contact Vendor Contact Vendor 11 | P a g e 9-5939-02 Eco Water Monitor User Manual 8. Notes Please retain this product manual and the installation guide. It contains practical instructions, technical specifications and safety precaution warnings you should know about. The maximum displayed value for all measurements and computed values is 19999. If a measurement exceeds this value, the display will flash. This does not affect data calculations or alarm functions. When used according to recommendations, the Tekelek Eco-Water monitors the water level in your tank and calculates and presents figures relating to the remaining water and the historical usage. The Tekelek Eco-Water must not be used as verification of a Weights and Measures certified dispensing meter. Patents pending or covered by one of the following patents: S2003/0882, EP2131164 (A1), US2006261966 (A1), US7277020 (B2), IE20030882 (A2), S2008/0466, US2009/0303059 A1 The Tekelek Eco-Water Monitor is intended to be connected to a power source continuously. It contains a small battery to keep time during power cuts. If the Tekelek Eco-Water Monitor is left unpowered for an extended period, then the battery will deplete, and information may be lost. When you are not using water system, you may unplug the Tekelek Eco-Water and store it until you wish to use your water system again. Its back-up battery and internal clock keep track of the settings previously entered. When the Tekelek Eco-Water has been unplugged and is plugged in again, it will start up in Lrn mode. Simply press any key to exit. When you are receiving a water fill, the Tekelek Eco-Water Sensor cannot receive a reliable echo due to turbulence within the tank and may cause the Tekelek Eco-Water Monitor to temporarily display some error messages. Should the tank be filled above the recommended 95% this will obstruct the sensor signal until the water level drops below 120mm\4.7inchs from the sensor. The sensor will be unable to send accurate readings during this period. The Tekelek Eco-Water Monitor displays the volume of liquid available above the outlet height. The default value of the outlet height configured in the monitor is 0cm/0. If the tank has an outlet that is above the bottom of the tank the full amount of the displayed volume will not be available for use. Not suitable for pressurised containers. Only use on tanks vented to the atmosphere. Only access the Reset Switch if instructed by customer service. Changes in temperature can result in contraction and expansion of the tank and hence can affect the tank capacity. Such changes may affect your readings. 12 | P a g e 9-5939-02 Eco Water Monitor User Manual 9. Warranty This product carries a 24-month warranty from date of original purchase from Tekelek against any deficiency or fault in manufacture. This does not affect your statutory rights, or any warranty offered by the seller if different to Tekelek. This warranty does not cover normal wear and tear, damage cause by negligence, accident, improper use or incorrect installation. Any change or modification made by the purchaser or user to the appliance will invalidate the warranty, as would any attempted repair. The warranty applies only when the appliance has been operated in accordance with the instructions and connected to an electricity supply which matches that shown in the manual. The warranty will be rendered invalid if the product is resold by the end user. The product must be used solely for domestic purposes. Tekelek Europe Ltds obligations are limited to the repair, or at its sole discretion, replacement of the unit. The unit should only be returned to Tekelek upon receiving confirmation from Tekelek that the return will be accepted. Tekelek distributors should get in touch in this regard with their normal sales contact at Tekelek. Other parties should only return the product for warranty assessment via the point of original purchase. Tekelek Europe Ltd. and its distributors shall not be liable for indirect or consequential loss or damage resulting from the use of this product. 13 | P a g e 9-5939-02
1 2 3 | Label | ID Label/Location Info | 73.09 KiB | January 14 2020 |
TEK 603 Tekelek Branded Rear Label with FCC 29 x 14mm 9-6036 Issue 01 Sheet 1 Of 1 Filename: 9-6036-01 TEK 603 Tekelek Branded Rear Label with FCC 29 x 14mm CH No. 8875 29mmLabel Dimensions:
Material type:
Face stock:
Liner:
Colour:
Drawing:
29mm x 14mm 3M Thermal transfer polyester label material 7816 Gloss radiant white polyester 2.0mil (51 micron) AdhesiveL #310 Acryliv 0.8mil (20 micron) Polyester 1.5 mil (38 micron) Pantone Black Where:
S6T603 = FCC Number xxxx = Part Number vv= Revision nn = Batch Number ww = Week Number yy = Year Number e.g.2016 = 16 zzzzzzz = Serial number unique to each unit Tekelek Europe Ltd
1 2 3 | Agent authorisation 1 of 2 | Cover Letter(s) | 278.83 KiB | January 14 2020 |
THIS MUST BE SIGNED BY THE APPLICANT AND SHOULD BE PLACED ON APPLICANTS LETTERHEAD ONLY IF AGENT IS SUBMITTING APPLICATION Authority to Act as Agent Date: 18-12-2019 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:
Compliance Engineering Ireland Ltd_is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 12 months By: j Jennrn~ Mx Seamus Normoyle f (Signature!) (Print name) Title: Senior Engineering On behalf of: Tekelek Europe Ltd (Company Name) Telephone: +353-(0)61 471511
'. Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 020415 08
1 2 3 | Agent authorisation 2 of 2 | Cover Letter(s) | 152.86 KiB | January 14 2020 |
Authorization Letter I, Martin Callanan, grantee contact, authorize Seamus Normoyle as agent to sign the Form 731 as requested by FCC, cited below. The FCC require that only an authorized individual may sign the Form 731 and / or sign attestations required for the application. FCC KDB 852134 D01 defines the authorized individual as either the applicant / grantee contact of record in the Grantee Code data base, or the agent authorized by the applicant / grantee. As Martin Callanan is the grantee contact, only he or his authorized agent can sign the agent letter. Date: 10th January 2020 Signature: __________________________________ Martin Callanan Applications engineering manager DIRECTORS: P. MC CARTHY (Managing), R. CULLEN. Registered in Ireland No. 232937 VAT Reg. IE8232937D WEEE Reg. 00232
1 2 3 | Confidentiality request | Cover Letter(s) | 520.37 KiB | January 14 2020 |
THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD Request for Confidentiality Date: 18/12/2019 Subject: Confidentiality Request for: S6T603 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 6.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit
[_] Short Term [_] Permanent Block Diagrams
[_] Short Term External Photos
[_] Short Term [| Permanent*? Internal Photos
[] Short Term [_] Permanent Operation Description/Theory of Operation
[-] Short Term [X] Permanent Parts List & Placement/BOM
[_] Short Term [_] Permanent Tune-Up Procedure
[_] Short Term Permanent Schematics
[_] Short Term Test Setup Photos
[_] Short Term [| Permanent*? Users Manual Tekelek Europe Ltd has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:
The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:
The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:
IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: fate Lyla Mr. Seamus Normoyle
(Sighathre/Title*) (Print name)
?. The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for DO1 found at:
https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section V regarding EXCEPTIONAL CIRCUMSTANCES. As of the October 2014 version of this document, TCBs can not authorize these requests. The applicant should petition the FCC by submitting an inquiry as directed. A copy of this inquiry and the FCCs response must be provided with the application. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 020415 08
1 2 3 | Operational description | Operational Description | 87.00 KiB | January 14 2020 |
TEK603 Theory of Operation The TEK 603 is tank liquid level monitor receiver with an ISM band radio. During installation, the tank settings need to be configured on the 603 receiver and a pairing procedure must be performed with a transmitter sensor. At the end of the pairing procedure, the 603 receiver sends the tank settings to the transmitter to keep the units synced. From there, the 603 receiver enters to its normal operation, where it listens and collects any data reported by the sensor transmitter. The data is used to perform some calculations and present to the users. The 603 receiver is powered from a power supply to USB adaptor. A coin cell battery is installed on the device to keep the clock running in case of a power outage or the power supply has been unintentionally disconnected from mains. Antenna is a resonant monopole type, tuned to operate at 915MHz and of length 72 mm Receiving frequency is at 914.50MHz with 2FSK FM modulation, 210kHz deviation and 25kb/sec
(NRZ) data rate. Transmitting frequency is at 915.00MHz with 2GFSK FM modulation, 70kHz deviation and 128kb/sec
(NRZ) data rate.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-01-14 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment | |
2 | 914.5 ~ 914.5 | CYY - Communications Receiver used w/Pt 15 Transmitter | ||
3 | 915 ~ 915 | DXX - Part 15 Low Power Communication Device Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2020-01-14
|
||||
1 2 3 | Applicant's complete, legal business name |
Tekelek Europe Ltd
|
||||
1 2 3 | FCC Registration Number (FRN) |
0013214499
|
||||
1 2 3 | Physical Address |
Shannon Free Zone Shannon
|
||||
1 2 3 |
Shannon Free Zone
|
|||||
1 2 3 |
Co. Clare, N/A
|
|||||
1 2 3 |
Ireland
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
h******@acbcert.com
|
||||
1 2 3 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
S6T
|
||||
1 2 3 | Equipment Product Code |
603
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
M****** C****
|
||||
1 2 3 | Title |
Engineering Manager
|
||||
1 2 3 | Telephone Number |
+353-********
|
||||
1 2 3 | Fax Number |
+353-********
|
||||
1 2 3 |
m******@tekelek.ie
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
Tekelek Europe Ltd
|
||||
1 2 3 | Name |
D******** P****
|
||||
1 2 3 | Physical Address |
Unit 118
|
||||
1 2 3 |
Shannon, V14 XY18
|
|||||
1 2 3 |
Ireland
|
|||||
1 2 3 | Telephone Number |
+353 ******** Extension:
|
||||
1 2 3 |
d******@tekelek.ie
|
|||||
app s | Non Technical Contact | |||||
1 2 3 | Firm Name |
Tekelek Europe Ltd
|
||||
1 2 3 | Name |
S****** N****
|
||||
1 2 3 | Physical Address |
Unit 118
|
||||
1 2 3 |
Shannon, V14 XY18
|
|||||
1 2 3 |
Ireland
|
|||||
1 2 3 | Telephone Number |
+353 ******** Extension:
|
||||
1 2 3 |
s******@tekelek.ie
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 | Yes | |||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 2 3 | CYY - Communications Receiver used w/Pt 15 Transmitter | |||||
1 2 3 | DXX - Part 15 Low Power Communication Device Transmitter | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Tank level monitor | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Compliance Engineering Ireland Ltd
|
||||
1 2 3 | Name |
J******** M******
|
||||
1 2 3 | Telephone Number |
+353 ********
|
||||
1 2 3 |
j******@cei.ie
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | CC | 914.50000000 | 914.50000000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 915.00000000 | 915.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC