submitted / available | |||||||
---|---|---|---|---|---|---|---|
|
2805ERM.003A1 RF FCC Wi-Fi 5GHz U-NII 3 | Test Report | 5.77 MiB | July 07 2020 / July 08 2020 | |||
|
2805ERM.003 RF FCC Wifi 5GHz Photographs | Test Setup Photos | 285.76 KiB | July 07 2020 / January 03 2021 | delayed release | ||
Cover Letter(s) | 175.77 KiB | July 08 2020 | |||||
|
FCC - Agent letter | Cover Letter(s) | 154.41 KiB | July 07 2020 / July 08 2020 | |||
|
FCC - Application letter | Cover Letter(s) | 491.64 KiB | July 07 2020 / July 08 2020 | |||
|
- FCC Confidentiality Request | Cover Letter(s) | 162.57 KiB | July 09 2020 / July 08 2020 | |||
Test Report | |||||||
Test Report | |||||||
Test Report | |||||||
Test Report | |||||||
Test Report | |||||||
Test Report | |||||||
Test Report | |||||||
Test Report | |||||||
Test Report | |||||||
Test Report | |||||||
Test Report | |||||||
RF Exposure Info | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
Test Report | |||||||
ID Label/Location Info |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-07-08 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | Class II Permissive Change |
2 | 2019-05-31 | JAB - Part 15 Class B Digital Device | Original Equipment | |
3 | 2422 ~ 2452 | DSS - Part 15 Spread Spectrum Transmitter | ||
4 | 2402 ~ 2480 | DTS - Digital Transmission System | ||
5 | 5500 ~ 5700 | NII - Unlicensed National Information Infrastructure TX |
Applicant Information | ||||||
---|---|---|---|---|---|---|
Effective |
2020-07-08
|
|||||
2019-05-31
|
||||||
Applicant's complete, legal business name |
Telit Communications S.p.A.
|
|||||
FCC Registration Number (FRN) |
0009643503
|
|||||
Physical Address |
Viale Stazione di Prosecco 5/b
|
|||||
Trieste, N/A
|
||||||
Trieste, N/A 34010
|
||||||
Italy
|
||||||
TCB Information | ||||||
TCB Application Email Address |
a******@dekra.com
|
|||||
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||||
FCC ID | ||||||
Grantee Code |
RI7
|
|||||
Equipment Product Code |
WE866C3
|
|||||
Person at the applicant's address to receive grant or for contact | ||||||
Name |
K**** B****
|
|||||
Title |
VP Application Engineering - Americas
|
|||||
Telephone Number |
1-919******** Extension:
|
|||||
Fax Number |
1-919********
|
|||||
K******@telit.com
|
||||||
Technical Contact | ||||||
n/a | ||||||
Non Technical Contact | ||||||
n/a | ||||||
Confidentiality (long or short term) | ||||||
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/03/2021 | |||||
11/23/2019 | ||||||
11/25/2019 | ||||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
Cognitive Radio & Software Defined Radio, Class, etc | ||||||
Is this application for software defined/cognitive radio authorization? | No | |||||
Equipment Class | NII - Unlicensed National Information Infrastructure TX | |||||
JAB - Part 15 Class B Digital Device | ||||||
DSS - Part 15 Spread Spectrum Transmitter | ||||||
DTS - Digital Transmission System | ||||||
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | BT & WiFi wireless module | |||||
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | |||||
Modular Equipment Type | Single Modular Approval | |||||
Does not apply | ||||||
Purpose / Application is for | Class II Permissive Change | |||||
Original Equipment | ||||||
Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | |||||
Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
Grant Comments | Output power listed is conducted. This device has 20, 40, and 80 MHz BW modes. Single Modular approval This grant is valid only when the module is sold to OEM integrators. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts. C2PC filing. The 5.8 GHz frequency band has been enable by SW. | |||||
Output power listed is conducted. Single Modular approval. This grant is valid only when the module is sold to OEM integrators. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts. Compliance of this device in all final product configurations is the responsibility of the Grantee. | ||||||
Output power listed is conducted. Single Modular approval. This grant is valid only when the module is sold to OEM integrators. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts. Compliance of this device in all final product configurations is the responsibility of the Grantee. | ||||||
Output power listed is conducted. This device has 20, 40, and 80 MHz BW modes. Single Modular approval This grant is valid only when the module is sold to OEM integrators. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts. Compliance of this device in all final product configurations is the responsibility of the Grantee. | ||||||
Is there an equipment authorization waiver associated with this application? | No | |||||
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
Test Firm Name and Contact Information | ||||||
Firm Name |
DEKRA Certification, Inc.
|
|||||
Name |
J**** F****
|
|||||
Telephone Number |
703 6********
|
|||||
j******@dekra.com
|
||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC | 5180 | 5240 | 0.0269 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC | 5210 | 5210 | 0.0068 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | CC ND | 5260 | 5320 | 0.0257 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15E | CC ND | 5290 | 5290 | 0.0062 | |||||||||||||||||||||||||||||||||||
1 | 5 | 15E | CC ND | 5500 | 5700 | 0.0251 | |||||||||||||||||||||||||||||||||||
1 | 6 | 15E | CC ND | 5530 | 5690 | 0.0087 | |||||||||||||||||||||||||||||||||||
1 | 7 | 15E | CC | 5745 | 5825 | 0.02818 | |||||||||||||||||||||||||||||||||||
1 | 8 | 15E | CC | 5755 | 5795 | 0.02455 | |||||||||||||||||||||||||||||||||||
1 | 9 | 15E | CC | 5775 | 5775 | 0.0105 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402 | 2480 | 0.0012 | 1 ppm | 1M21G1D | |||||||||||||||||||||||||||||||||
3 | 2 | 15C | CC | 2422 | 2452 | 0.0088 | 1 ppm | 36M0D7W | |||||||||||||||||||||||||||||||||
3 | 3 | 15C | CC | 2412 | 2462 | 0.0248 | 1 ppm | 13M3D7W | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | 1.0000000000 ppm | 1M09F1D | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15E | CC | 5180 | 5240 | 0.0269 | 1 ppm | 16M4D7W | |||||||||||||||||||||||||||||||||
5 | 2 | 15E | CC | 5180 | 5180 | 0.0068 | 1 ppm | 76M5D7W | |||||||||||||||||||||||||||||||||
5 | 3 | 15E | CC | 5260 | 5320 | 0.0257 | 1 ppm | 16M4D7W | |||||||||||||||||||||||||||||||||
5 | 4 | 15E | CC | 5290 | 5290 | 0.0062 | 1 ppm | 76M5D7W | |||||||||||||||||||||||||||||||||
5 | 5 | 15E | CC | 5500 | 5700 | 0.0251 | 1 ppm | 16M4D7W | |||||||||||||||||||||||||||||||||
5 | 6 | 15E | CC | 5530 | 5690 | 0.0087 | 1 ppm | 95M0D7W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC