Indication Green (Blinking) Green (Fast Blinking) Red(Blinking) Red(Steady) Red(Steady) Green(Steady) Operating State Standby Searching Network Low Battery Charging PTT Transmitting PTT Receiving FCC ID:2ANY6-TE390 TE390 Quick Start Guide Thanks for choosing our product!
This Quick Start Guide Only applicable to: TE390. Before using the product, please read the Quick Start Guide to fully benet from it. Channel Switch OLED Screen LED Indicator Speaker PTT Button MIC Volume Button Flashlight Accessory Connector Programmable/
Emergency Button Power Button Battery Cover Lock Charger Docking Port USB Port Telo Systems Tel: +86-755-86950766 E-mail: support@telosystems.com Add:4/F, Chuangye Building, Seven-Star Park, Yu'an 2nd Road, Bao'an District, Shenzhen, China www.telosystems.com Battery1 Quick Start Guide1 Note Warranty period is 1 year from date of purchase. This product involves constant upgrading and/or improvement, our company reserves the right to change the specications of software and/or hardware mentioned in this operating guide without any prior notice. The product specications and information mentioned in the operating guide are for reference only. Check List TE3901 Travel Charger1 Notice:
Please check the following accessories before you discard the packing material. Please contact your local dealer immediately if there is any missing or damage parts. Basic Operation Power on/o Long press the Power Button to power on/o the device. Screen interaction Channel Switch Single Click: Lighten the screen/ enter a menu or choose an option Long Press: Back to the previous menu Double Click: When you are connecting the WIFI and inputting password, double click Switch clockwise/counterclockwise: Switch/back to the next/previous menu item to input lowercase. USB Data Cable1 Belt Clip1 WiFi Connection Go to the Settings > WiFi interface. Enable the WIFI option (single click to revert the status), Switch to nd the right access point you want to connect to, single click the right access point then input the password in (Single click to input lowercase, double click to input uppercase). Switch to select inputting characters. Click to conrm / exit the password inputting. GPS Location Go to the Settings > Location interface, single click to enable or disable GPS location. Date & Time Conguration Go to the Settings > Date&Time interface, single click to congure time display format. Bluetooth Connection Go to the Settings > Bluetooth interface, Switch to choose PTT Button, single click to enable Bluetooth connection, after Scanning for a while, switch and nd the right device name, single click to conrm bonding to the Bluetooth button, others Bluetooth device please choose Headset with the same operation. Cellular Data Connection Go to the Settings > Cellular data interface, single click to revert enable or disable cellular data connection. Flashlight Go to the Settings > Flashlight interface, single click to turn on/p the ashlight. or Press the Vol- and Programmable button at the same time to turn on/o it. Battery Percentage Go to the Settings > Battery percentage interface, single click to show / hide the battery percentage status on the display screen. M6 Settings Go to the Settings > M6 Settings interface, single click the channel switch to choose
"Headset" or "Remote Speaker Mic" mode. Language Go to the Settings > Language interface, switch and single click to choose the right language. Factory Reset Go to the Settings > Reset interface, under the interface Are you sure about recovery?, switch the options, choose Yes to reset and No to exit. System Information Go to the Settings > About interface, nd the device and SIM card information including Operation System Version, IMEI Code, Battery Percent, SIM Name, SIM Level, SIM Type. System Update Go to Settings > System Update interface, single click to check updates. Push-To-Talk Application Go to the PTT item, single click to enter in the PTT application interface. Switch between dierent groups to execute instant communication. Before Use 1.Release the battery cover lock, move the battery cover away. 3.Put the Battery into the slot. 4.Lock the battery cover. 2. According to the indication, insert the SIM or SD card inside the SIM or SD card slot. Using USB Data Cable Connect the LTE handheld and power adapter using the USB Data Cable. Red light on the LTE handheld indicates battery charging in progress. Green lights on indicates fully charged. Notice:
Always use Telo Original batteries and chargers. The warranty does not cover damage caused by non-Telo batteries and/or chargers. WARNING: DO NOT USE THE ABOVE TWO CHARGING METHODS SIMULTANEOUSLY. USB Data Cable To USB Power Adapter To Device USB Port SIM Card Slot Charging Using Desktop Charger Connect the Desktop Charger and the Power Adapter with an USB Data Cable. Red light on the desktop charger indicates battery charging in progress. Green light on the desktop charger indicates fully charged. Battery Cover Lock SD Card Slot To USB Part On Desktop Charger To USB Power Adapter USB Data Cable Cautions Risk of explosion, re or chemical burns if battery is disassembled, crushed, stricken, trampled, short-circuited, incinerated or exposed to high temperature over 60. Dont use damaged or weeping battery. Keep the battery dry and out of Childrens reach. Properly dispose of failure batteries in accordance with local regulations. Although your device is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending, or sitting on it. Make sure the charger/USB port, microSD card/SIM card slot covers are properly seated, with no foreign objects obstructing the seals. Do not use the charger/USB port for charging, data transmission, etc. until the phone is completely dry. Do not store the device under any circumstance containing electronic erosive material. Avoid to pull the device up by holding the antenna or accessories. Please power o and unload the battery before cleaning the device. Using dry and clean lint-free cloth or hairbrush to keep the device and charger docking port clean. Avoid to use any chemical agent including detergent, alcohol, aerosol spray or oil preparations as cleaning solution. Dry your device completely after cleaning and before using it again. FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types TE390 (FCC ID: 2ANY6-TE390) has also been tested against this SAR limit. The highest reported SAR values for head, body-worn accessory are 0.61 W/kg, 0.88 W/kg respectively. The Max simultaneous SAR is 1.02 W/kg. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 5G For 5150-5250 and 5725-5850 frequency band, Operations in the 5150-5250 and 5725-5850 band are restricted to indoor usage only. 5G:
Any emission is maintained within the band of operation under all conditions of normal operation. The max. frequency stability is less than 20ppm.