FCC ID: 2ANY6-TE580P User Manual Smart Phone TE580P Product introduction SOS Button TE580P Quick Start Guide Channel +
Channel -
Front Camera Volume +
PTT Button Volume -
Mute Menu Speaker Back Mic Home Thanks for choosing our product!
This Quick Start Guide Only applicable to: TE580P. Before using the product, please read the Quick Start Guide to fully benet from it. Check List Basic Operation Please check the following accessories before you discard the packing material. Please contact your local dealer immediately if there is any missing or damage parts. Accessories Quantity 1 1 1 1 1 TE580P USB Data Cable Battery Charging Plug Quick Start Guide Before Use 1. Release the battery cover lock, move the battery cover away. 2. According to the indication, insert the SIM or SD card inside the SIM or SD card slot. 3. Put the Battery into the slot. 4. Lock the battery cover. Power On Press the power on button for 3 seconds, Once the screen goes light up, You will see the screen on, it indicates successful turn on Power Off Press the power off button for 3 seconds, Once the screen goes blank, the smart terminal is fully shut down. Home Press home button to enter the home page Menu Press menu button to enter the setting page Back Press back button to return the last page Unlock
- Press menu button then press back button to unlock
- Slide lock icon on the screen to unlock Charging Using Desktop Charger Operating State Indication Standby Green (Blinking) Searching Network Green (Fast Blinking) Low Battery Charging PTT Transmitting Red (Blinking) Red (Steady) Red (Steady) PTT Receiving Green(Steady) Rear Camera M6 Interface USB Port Power Desktop Charging Points Note Battery Cover Switch Warranty period is 1 year for product from date of purchase. Warranty period is half a year for accessories from date of purchase. This product involves constant upgrading and/or improvement, our company reserves the right to change the specifications of software and/or hardware mentioned in this operating guide without any prior notice. The product specifications and information mentioned in the operating guide are for reference only. TeloSystems Tel: +86 755 86950766 E-mail: support@telosystems.com Add: 4/F, Chuangye Building, Seven-Star Park, Yu'an 2nd Road, Bao'an District, Shenzhen, China. www.telosystems.com Connect the Desktop Charger and the Power Adapter with an USB Data Cable. Red light on the desktop charger indicates battery charging in progress. Green light on the desktop charger indicates fully charged. Using USB Data Cable Connect the LTE handheld and power adapter using the USB Data Cable. Red light on the LTE handheld indicates battery charging in progress. Green lights on indicates fully charged. Notice:
Always use Telo Original batteries and chargers. The warranty does not cover damage caused by `non-Telo batteries and/or chargers. Caution Risk of explosion, fire or chemical burns if battery is disassembled, crushed, stricken, trampled, short-circuited, incinerated or exposed to high temperature over 60C. Dont use damaged or weeping battery. Keep the battery dry and out of Childrens reach. Properly dispose of failure batteries in accordance with local regulations. Although your device is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting or bending, or sitting on it. Make sure the charger/USB port, microSD card/SIM card slot covers are properly seated, with no foreign objects obstructing the seals. Do not use the charger/USB port for charging, data transmission, etc. until the phone is completely dry. Do not store the device under any circumstance containing electronic erosive material. Avoid to pull the device up by holding the antenna or accessories. Please power off and unload the battery before cleaning the device. Using dry and clean lint-free cloth or hairbrush to keep the device and charger docking port clean. Avoid to use any chemical agent including detergent, alcohol, aerosol spray or oil preparations as cleaning solution. WARNING: DO NOT USE THE ABOVE TWO CHARGING METHODS SIMULTANEOUSLY. Dry your device completely after cleaning and before using it again. Emergencycall If any emergency arises, dial 112/911 (or other emergency call number) for emergency help. Due to the nature of cellular networking, the success of emergency call is not guaranteed. FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types TE580P (FCC ID: 2ANY6-TE580P) has also been tested against this SAR limit. The highest reported SAR values for head, body-worn accessory are 1.06 W/kg, 0.88 W/kg respectively. The Max simultaneous SAR is 1.43 W/kg. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 5G For 5150-5250 and 5725-5850 frequency band, Operations in the 5150-5250 and 5725-5850 band are restricted to indoor usage only. 5G:
Any emission is maintained within the band of operation under all conditions of normal operation. The max. frequency stability is less than 20ppm.