Indoor WiFi AP Quick installation Guide Copyright This DOCUMENT is copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Telnet. Notice Telnet reserves the right to change specifications without prior notice. While the information in this document has been compiled with great care, it may not be deemed an assurance of product characteristics. Telnet shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from Telnet. 0 Contents Copyright Notice Contents .................................................................................... 1 1. About this Guide .................................................................... 2 2. Whats in the box? .................................................................. 2 3. Connectors & LED Indicators ................................................... 3 4. Connect IDU to ODU ............................................................... 5 5. Easy Setup .............................................................................. 6 6. Wi-Fi Setting ........................................................................... 7 7. Make Phone Call ..................................................................... 8 1 1. About this Guide This document provides information and procedures on installation/configuration of LTE Indoor CPE. You could utilize the theoretical information in this guide to setup your device. This Quick Installation Guide covers the basic installation of the Indoor Gateway. 2. Whats in the box?
Here's a quick checklist of everything inside your box. Before installing the ODU, please check you have all of these items listed below. If any of these items is missing or damaged, please contact your LTE service provider. The LTE Indoor CPE Quick installation Guide Power Adapter Power Plug (EU)/ Power Plug (US) 2 3. Connectors & LED Indicators IDU Rear Panel IDU Front Panel 3 IDU LED Indicators:
No. Type Color Action Description 1 2 Power System Green Solid ON Power on OFF Power off Green Solid ON System is booting OFF System is disabled 3 LTE Signal Strength Green Solid ON Display signal strength 1 LED: 0<=CINR<8 2 LED: 8<=CINR<24 3 LED: 24<=CINR OFF No signal Green Solid ON LTE is connected WAN Green Blinking LTE is transmitting data OFF LTE is disabled Green Solid ON LAN is connected LAN1&2 Green Blinking LAN is transmitting data WPS OFF LAN is disabled Green Blinking WPS is connecting OFF WPS is disabled Green Solid ON WiFi is enabled WLAN Green Blinking WiFi is transmitting data Phone VoIP OFF WiFi is disabled Green Solid ON VoIP Registered/ Off-hook/ Busy Incoming call ringing Green Blinking New incoming call during conversation Incoming voice mail waiting OFF VoIP not registered / VoIP disabled 4 4 5 6 7 8 4. Connect IDU to ODU DO NOT CONNECT A COMPUTER OR A SWITCH DIRECTLY TO THE IDUS POE PORT DUE TO THE HIGH POE POWER (56V). Connect the IDU, ODU & IDU Hardware Connections 1. Connect the CAT 5 Ethernet cable which is already connected to the ODU to the IDUs RJ-45(WAN) POE port.(Suggest to use Cat5E shielded Patch Cable, and must not exceed 100m). 2. Connect the Ethernet cable from computer to one of the IDUs Ethernet Ports. 3. Connect the RJ11 (Phone Line cable) to the Phone Port for using VoIP. 4. Connect the supplied power adapter to this IDU device. The Power LED will remain steady green when device is ready. ODU IDU 1. CAT 5 (or Cat5E) Outdoor Shielded Patch Ethernet cable (not Included) for connecting IDU and ODU 3. One RJ-11 phone cable
(not included) for connecting 2. CAT5 8-wire Ethernet cable (not included) for connecting IDU and PC IDU and Phone 5 CAUTION 5. Easy Setup Physical connection as following (Refer to Installing Device Instruction). Make sure there is a SIM in ODU(SIM CARD SLOT). Connect IDU(WAN) and ODU(RJ45 & POE POWER SLOT) via Ethernet cable. Use power adapter to connect IDU(Power). Connect IDU(ETHERNET PORTS) and PC via Ethernet cable. Please follow the steps below to configure your device through the web interface:
Step1: Open the Web browser (Internet Explorer) and enter the default IP address of the ODU CPE, which is : http://192.168.254.251 Default username/password: admin/admin Step2: The page shown here gets displayed in your browser after login; you can now configure the device settings. Signal Strength indicator on the upper-left corner of webpage. Mode:
LTE Operator:
APN Name Signal:
(More bar means better signal)
(Disconnect, no signal) 6 6. Wi-Fi Setting Step1: Select WIFI from main menu. Then screen will display the default setting of SSID, radio channel, working mode, and SSID broadcast. Step2: You could specify a radio channel, working mode, bandwidth in Settings page. 7 7. Make Phone Call The VoIP settings should be provided by your VoIP service provider. VoIP doesnt support flash + number feature. Using a telephone connected to the PHONE port on IDU device, and making a call to another phone (either an Internet phone, or a regular PSTN number). If you are able to call the other number, your VoIP setup is working properly. Follow these directions to make calls over the Internet:
To dial a SIP number, press the numbers on your phones keypad to make the call. To call regular telephone numbers, use your VoIP service providers dialing plan. For call forward service, contact your service provider to know if they support this feature. To receive a call through the IDU, the other party must have your SIP number and a SIP account of their own. 8 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA 9 Industry Canada statement:
This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes:
(1) Ce dispositif ne peut causer d'interfrences; et(2) Ce dispositif doit accepter toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement de l'appareil. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. 10