WirelessIRtransceiverwithpairingfunctionUserGuide A1369FC PRODUCT FEATURES:
1. It works not only as a IR Repeater but also works as a wireless IR Extender 2. Radio Frequency (RF): 915 MHz 3. RF working Range up to 100+ meters in Open Space. 4. IR carrier tuning freq.: 20~ 60KHz 5. Compliant with CE/FCC EMC regulation 6. High receiving sensitivity (-90dBm). 7. Bi-Directional full band IR Control 8. Channel Pairing. SPECIFICATIONS IR:
1. Compatible with all Universal full band carrier frequency infrared Remote (20KHz to 60KHz) 2. Better IR receive sensitivity (distance), over 7 meters RF:
1. Long range RF transmission over 100+ meter in open space 2. Use 915MHz RF technology to avoid interference in crowded 433MHz RF activities 3. Bi-Directional full band IR Control 4. FSK modulation:
Better signal sensitivity than ASK modulation Better Anti RF-interference than ASK modulation Better performance in noise suppression 5. Digital data encryption function ensures safety and reliability 6. Support:
One receiver to one transmitter. (Point to Point) One receiver to multi transmitters, (Point to Group) Multi receivers to one transmitter. (Group to Point) Multi receivers to multi transmitters. (Group to Group) 7. Channel Pairing/ Channel addressable grouping Kits Includes:
IR Emitter cable IR Target cable Bi-Directional Wireless IR Dongle Power supply User manual or Single Dual WirelessIRtransceiverwithpairingfunctionUserGuide A1369FC Applications IR Repeater Broadcasting Control Addressable Control Bi-Directional Control Installation steps:
Application1: Single dongle IR Repeater (without RF) Step1: Connect with the power Place the dongle on the power adaptor. Step2: Connect the cables Plug-in the IR target cable to the IR TARGET of the dongle that receive IR signals from the Remote Control. Plug-in the IR emitter cable to the IR EMITTER of the dongle that is near the devices you want to control Step3. Adjust the IR TARGET and IR EMITTER Place the IR TARGET CABLE at your desired location, near the devices you want to control Aim the IR EMITTER EYE on each device (IR RECEIVER EYE) you want to control Step4: Have fun with the wireless IR control Power on and enjoy. Application2: Wireless IR Broadcast Control Step1: Connect dongles with the power Place the dongles. One dongle at local side (in the same room as the Remote Control) and the WirelessIRtransceiverwithpairingfunctionUserGuide A1369FC other dongles at Clint sides (near the devices you want to control. Multiple dongles for multiple room). Connect the dongles with power adaptors. Step2: Connect the cables Plug-in the IR target cable to the IR TARGET of the dongle that receive IR signals from the Remote Control. For each dongle at a client site, plug-in the IR emitter cables to the IR EMITTER of the dongle that is near the devices you want to control Step3. Adjust the IR TARGET and IR EMITTER Place the IR TARGET CABLE so that it can be directly aimed with the Remote Control. Place the IR EMITTER CABLE on the devices you want to control Aim the IR EMITTER EYE on each device (IR RECEIVER EYE) you want to control Step4: Make sure all dongles use the same RF channel. Use the Pairing switch to select RF channel if necessary. Step5: Have fun with the wireless IR control Power on and enjoy.
[NOTE: Due to IR code characteristics, multiple Remote Controls with different brand can be used for this setup to control its target devices in different room.]
Application3: Addressable Control (multiple channels for multiple groups) Step1: Connecting with the power Place the dongle at local side in the same room as the Remote Controls. Use as many dongles as how many groups that are needed for setup. They may not be in the same room. Place the other dongles at Clint sides, near the devices you want to control. Multiple dongles for multiple rooms. Connect the dongles with power adaptors. Step2: Connecting the cables Plug-in the IR target cable to the IR TARGET of the dongle that receive IR signals from the Remote Control. Plug-in the IR emitter cables to the IR EMITTER of the dongle that is near the devices you want to control. Step3. Adjustment the IR TARGET and IR EMITTER Place the IR TARGET CABLE so that it can be directly aimed with the Remote Control. Place the IR EMITTER CABLE on the devices you want to control Aim the IR EMITTER EYE on each device (IR RECEIVER EYE) you want to control Step4: Adjust the Pairing switch Based on your grouping idea, adjust all Pairing switch on the dongles you want to control. Both at the device sides and the Remote Control sides. Step5: Have fun with the wireless IR control Power on and enjoy. Application: Bi-Directional Control Step1: Connecting with the power Place the dongles in two rooms. Each room may have an equipment to be controlled from the WirelessIRtransceiverwithpairingfunctionUserGuide A1369FC other room and a Remote Control to control a target equipment in the other room. Connect the dongles with power adaptors. Step2: Connecting the cables For each dongle in each room, plug-in the IR target cable to the IR TARGET and IR emitter cables to the IR EMITTER. Step3. Adjustment the IR TARGET and IR EMITTER Place the IR TARGET CABLE so that it can be directly aimed with the Remote Control. Place the IR EMITTER CABLE on the devices you want to control Aim the IR EMITTER EYE on each device (IR RECEIVER EYE) you want to control Step4: Adjust the Pairing switch Adjust all Pairing switch and make sure both IR Wireless Repeater dongles are set to the same channel. Step5: Now the dongle can forward the Remote Control signal to the other room and send IR signals that is received via the RF from the other room. Power on and enjoy. Trouble Shooting Case Phenomena Description The distance between remote control and IR Receiver is short (perhaps less than 5 Meters) Target device does not work with your IR Kit I have connected the way as the user manual said, but still cannot get this kit to work. In manual, it said it can work within or over 100 meters open space, but why it may just work 50 Meters for me. 1 2 3 4 Trouble shoot Please make sure the battery in the remote control is sufficient. (Because the working distance between IR Receiver and remote control is determined by the IR signal power of your remote controller. Try to replace the old battery with the new battery in your remote controller. Usually, this kit should work perfectly across various brand of remote controller. In rare case, if you encounter this problem, please report the model number for your device to us. Customer service will take care of you. Please check the material of your cabinet. If your cabinet is made by metal, Radio Frequency may not pass through. We recommend to relocate our device outside of the cabinet, and make sure Radio Frequency can function as the product is designed. Open space means theres nothing between IR Receiver and IR Emitter. So, for the RF distance between IR Receiving unit and IR Emitter unit could be reduced by wall, cabinet, furniture, etc. WirelessIRtransceiverwithpairingfunctionUserGuide A1369FC Declaration of Conformity FCC Part 15.19 Caution:
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may cause undesired operation 2. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 3. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Statement in Users Manual (for calss B) FCC Section 15.105 Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a lass B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.