FCC ID: 2AVF3-ELI0980G-1 Intelligent 3-Pk Solar Wall Lights

Manual Before installation Note: Remove all packaging materials from the product. The included mounting material (screws and wall plugs ) is suitable for ordinary solid concrete or masonry construction. Check which mounting material is suitable for your chosen mounting surface. If necessary, seek expert advice. Installation Note:For best effect,the security light should be installed at a height of 0.5-1.6m above ground level. Installing the wall light Drill two mounting holes on the wall using an appropriately sized drill bit for mount screws After inserting the anchor, install the screws and reserve a small screw head outside. Align the two holes at the back of the lamp with the two screws. Note:if the mounting surface requires the use of wall plugs(e.g.brick or concrete)or pre-drilling(e.g. hard wood),first mark and drill pilot holes in the wall using the wall bracket as a template. Ensure that the solar panel is angled so that it receives the maximum amount of sun exposure. Operation The switch has three gears. Auto: Induction mode, lights up for 30 seconds after detecting the induction Off: off mode, the light does not work On: long light mode, continuous lighting FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Size: 7x4cm Item No: S-8084 Batch Code: 2019/11 Made in China FCC ID: 2AVF3-ELI0980G-1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

DATE : 2019-12-30 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Jason Wu of Global United Technology Services Co., Ltd.and No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with TEST RITE INT'L CO.,LTD and 3F, No.1-2 HuangDu Square, No.3008, Yitian Road, Futian District, Shenzhen, China Signature:

Name: Xingrong Zhang Title: Engineer Company: TEST RITE INT'L CO.,LTD

TEST RITE INT'L CO.,LTD DATE : 2019-12-30 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AVF3-ELI0980G-1 Product Name: Intelligent 3-Pk Solar Wall Lights Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

(List here the documents for which you are seeking confidentiality for example ) Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signature:

Name: Xingrong Zhang Title: Engineer Company: TEST RITE INT'L CO.,LTD