FCC ID: WAF-0572220202 Wireless Sensor T2

testo Saveris radio data logger 0572 2200 XX Gateway 0572 2201 XX radio data logger ambient temperature 0572 2202 XX radio data logger temperature product simulation 0572 2203 XX radio data logger door contact 0572 2204 CC radio data logger core temperature Instruction manual for NSF testing V2 Table of contents Table of contents 1 About this document ................................................................................... 2 1.1 Usage ..................................................................................................... 2 1.2 Symbols ................................................................................................. 2 2 Safety and disposal ..................................................................................... 3 Take the testo information document into account (accompanies the product). ............................................................................................. 3 2.1 Warning .................................................................................................. 3 3 System description ...................................................................................... 3 3.1 System Overview ................................................................................... 5 3.2 Product description ................................................................................. 5 3.3 radio data logger ambient temperature ............................................... 7 3.4 radio data logger temperature product simulation ............................... 7 3.5 radio data logger door contact ............................................................. 7 3.6 radio data logger core temperature ..................................................... 7 3.7 Gateway button functions & LED............................................................ 8 3.8 Radio data logger button functions & LED ............................................. 9 4 Commissioning .......................................................................................... 10 4.1 Mounting on the wall ............................................................................ 10 4.2 Mounting of communication module to the Gateway ............................ 10 4.2.1 WLAN module and PoE module ............................................ 11 Power supply / batteries ........................................................ 12 4.2.2 4.3 Configuration of the Gateway ............................................................... 12 Account / Saveris Connect Key ............................................. 12 NSF-certification account ....................................................... 12 Gateway offline configuration ................................................ 13 4.4 Connecting a radio data logger ............................................................ 15 5 Software ...................................................................................................... 16 5.1 Saveris Restaurant Software ................................................................ 16 Access ................................................................................... 16 5.1.1 5.1.2 Saveris Restaurant Online/ Radio data logger website .......... 17 5.1.3 Measurement curves ............................................................. 17 5.2 MTS Viewer Software URL-address ..................................................... 18 5.3 MTS-Viewer dashboard ........................................................................ 19 Selecting Sensor.................................................................... 19 Display of measurement data ................................................ 19 Time range ............................................................................ 19 CSV Export ............................................................................ 20 5.3.1 5.3.2 5.3.3 5.3.4 4.3.1 4.3.2 4.3.3 Table of contents 5.4 Disable of radio data sensor or Gateway ............................................. 20 6 Battery / Sensor power supply ................................................................. 21 6.1 Lithium battery ..................................................................................... 21 6.2 Modified sensors for power supply test ................................................ 21 7 Technical data ............................................................................................ 22 7.1 Radio specific data .............................................................................. 22 7.2 Technical specifications for WLAN or Ethernet communication .......... 23 Ethernet /DHCP .................................................................... 23 Ports ...................................................................................... 23 7.3 General data sensors .......................................................................... 23 7.2.1 7.2.2 1 About this document Read these operating instructions carefully and familiarize yourself with the product before using it 1.1 Usage Keep this documentation to hand so that you can refer to it when necessary. Please read this instruction manual through carefully and familiarize yourself with the product before putting it to use. Hand this instruction manual on to any subsequent users of the product. Pay particular attention to the safety instructions and warning advice in order to prevent injury and damage to the product. 1.2 Symbols 2 Safety and disposal Take the testo information document into account (accompanies the product). 2.1 Warning Always observe information marked by the following warnings with warning pictograms. Take the specified precautionary measures!

Danger to life!

Indicates possible property damage DANGER ATTENTION 3 System description The testo Saveris wireless sensors are part of the testo Saveris Solution. As a stationary measurement technology solution, they are ideally suited for monitoring temperature and door contacts in cold stores and warehouses. The wireless sensors are available in various versions and can therefore be flexibly adapted for numerous applications. Depending on the version, they have an air temperature sensor, an additional product simulator (mimicking), a door contact sensor and a penetration probe sensor. The data of the sensors is transmitted via a Gateway in to the Saveris Restaurant cloud. The sensors can be integrated into the testo Saveris Food Solution. The data is recorded at configurable intervals and transferred to the Testo Cloud [Cloud] at configurable intervals. The customer's WLAN or Ethernet infrastructure is a prerequisite for transmitting the data (not part of the scope of delivery). The measured values stored in the cloud can be called up and analyzed at any time in the corresponding testo Saveris Cockpit [Webbased analysis]. Limit value violations are immediately displayed on the Control Unit [Operative Control Unit]

or reported by e-mail or SMS. 3.1 System Overview 3.2 Product description 1 article number & name: 0572 2201 XX description:

radio data logger ambient temperature 2 article number & name 0572 2202 XX description:

radio data logger temperature product simulation 3 article number & name 0572 2203 XX description:

radio data logger door contact 4 article number & name 0572 2204 XX description:

radio data logger core temperature 5 article number & name 0572 2204 XX description:

Gateway 6 article number & name 0554 9320 01 description:

WLAN-communication module 7 article number & name 0554 9330 description:

LAN/PoE-communication module 8 article number & name 0572 2210 description:

radio data logger wall holder 10 article number & name 0572 2211 description:

radio data logger holder penetration probe 3.3 radio data logger ambient temperature This sensor measures temperature of its ambient. 3.4 radio data logger temperature product simulation This sensor measures temperature of its ambient as well but provides an additional calculated temperature measurement value. This calculated value represents a product temperature value according a calculated/ simulated behavior. The product simulator is designed to simulate food thawing and chilled or frozen food. However, the product simulator does not represent the core temperature of the food, but simulates the behavior of the food. 3.5 radio data logger door contact This sensor is used to detected/observe open or closed doors. 3.6 radio data logger core temperature With this sensor it is possible to measure temperature of liquid food, i.e. soups. Just immerse the metal sensor tip inside the liquid food. 3.7 Gateway button functions & LED long = 1 sec / periode = 2 sec short = 200 msec / periode = 400msec Gateway LED1 Sensor status Mode Join Mode action /

button button press <

3 sec new sensor was connected 30 sensors connected / no more connections possible

(finished join mode) join mode finished -> back to default Receive data from sensor default Mode Gateway LED2 Network status Configuration Mode

(Config XML is saved and GW connect to Cloud ) Configuration saved and Connection available No/wrong configuration Connection not available

* Ethernet cable

* no WLAN connection Network / HW error Communication to Cloud Signal Color continuously on 2 x short blinking 2 x short blinking 1 x short blinking off green green red green

off action /

button connected to PC via USB-

cable disconnected from PC Signal Color continuously on green 5 sec on green

red red blinking continuously short

(200msec/400msec) blinking continuously long

(1 sec / periode = 2 sec) 2 x short green orange FW update Over the air alternating long green/red factory Reset button press

> 20 sec 3.8 Radio data logger button functions &

LED Mode action / button Signal Power down Sensor switched ON from power down button press < 3 sec in state OFF Blinking for 90 sec 0,2 sec on 0,8 sec off (green) -> sensor is in manual join mode In case of finished join mode (max 90 sec) 1x 2 sec green-> Connection to GW OK 1x 2 sec red -> no Connection to GW 1 x 0,5 sec green 1 x 0,5 sec red -> sensor go OFF Blinking for 90 sec 0,2 sec on 0,8 sec off (red) -> sensor in roaming mode In case of finished join mode (max 90 sec) 1x 2 sec green-> connection to GW OK 1x 2 sec red -> no connection to GW 1x 0,2 sec green-> Sensor measure

(direct after press button) Sensor is in connected state max after 30 sec:

1x 0,2 sec green-> connection to GW OK 1x 0,2 sec red -> no ACK from GW 2 x 0,5 sec green 2 x 0,5 sec red -> sensor go OFF Sensor Switch OFF

(Sleep Mode) Power Off / Sleep Mode (no connection to Gateway) button press > 3 &

<10 sec in state oN

(Logging) button press <

1sec in state sleep button press <

1sec in state sleep Logging Mode Only by manual measure and data sending

(not during regular sendings) Sensor Switch OFF

(factory reset) button press

> 30 sec 4 Commissioning This chapter describes the commissioning of the NSF test set up. The system is mainly designed to enable NSF to do the certification tests. The system does not support the whole system UI functionality, which will be offered to end customers in series. The hardware devices have already achieved nearly series level. The measurement data of the devices itself is sent to the original Cloud IoT-core, from where the data can be displayed via Saveris Restaurant Website. Additional the software MTS IoT Core viewer, allows the user to display the measurement values on PC and export the data to csv.file. This software is very limited in its functionality and has only the purpose to get measurement values from the IoT data base. The UI is simple and limited. Measurement and communication cycle is set default by system. Measurement cycle: 1min Communication cycle: 1min 4.1 Mounting on the wall The wall bracket is used to mount the online data logger. Select suitable mounting materials according to the desired mounting location. The wall mount can be attached using the supplied adhesive strips. Alternatively, suitable screws or cable ties can also be used (not included in the scope of delivery). DANGER Danger to life!

Electrical lines can be damaged.

- When fixing the wall bracket by means of screws, do not mount directly on electrical equipment. When using adhesive strips, make sure that the substrate is clean and free of grease. 4.2 Mounting of communication module to the Gateway 4.2.1 WLAN module and PoE module Before connecting the gateway to the PC or to power supply, the communication modules must be mounted to the gateway first. 4.2.2 Power supply / batteries In general, the Gateway runs without any batteries. It needs a continuous 5V DC/2A power supply. Additionally, the gateway has a battery compartment. Batteries are only relevant for customers, which follow a disaster recovery plan, to ensure, that in any case of power loss, that gateway still works. Basically, the gateway does not store any measurement values. If the power is down, measurement values are stored in the sensor, if they cant be forwarded to the gateway due to power loss. 4.3 Configuration of the Gateway In case of using WLAN, make sure that a stable WLAN connection is available before you start configuring the gateway, In case of using Ethernet, make sure that the Ethernet connection of the Gateway to the cloud is not blocked by internal fire walls of the IT. See chapter 7. 4.3.1 Account / Saveris Connect Key The Account ID/Saveris Connect Key is the unique address of your user account in the Testo cloud. This connect key is needed to configure the Gateway in order to ensure that the Gateway sends your data to the correct user account. 4.3.2 NSF-certification account The user account is defined by an email-address:

Account Saveris Connect Key / Account-ID testo.qsr+nsf.ws_rm@gmail.com DW-K4-LM-Q3-int0 Password is sent separately!

4.3.3 Gateway offline configuration The Gateway can be configured via a PDF form. Note You need the Adobe Reader program (version 10 or later) to use the PDF form correctly. If you have not installed Adobe Reader, you can go to the following address to download it free of charge: http://get.adobe.com/reader/. 1. Connect the Gateway with mounted WLAN module to the PC. 2. Open the file NetConf.pdf on the external drive in the Windows-Explorer. 3.Enter the Saveris Connect Key into the Account ID field 4. Enter the local WLAN Network name (SSID) and, if necessary, your WLAN password in the relevant fields on the PDF form. 5. Click on the Save configuration button. A dialogue box opens for exporting the form data. 6. Select the external Gateway drive as the storage location and save the form data (configuration file WiFiConf_Daten.xml) on it. 7. Disconnect the USB connection from the PC to complete the configuration of the logger. You can also save the configuration file locally on your computer and configure other Gateways even faster by simply copying the XML configuration file onto their external drive. 8. Connect the Gateway with USB-cable to external power adapter. Do not use the Laptop for power supply. 9. After powering up the Gateway again, the Gateway starts connection to the cloud. 1 2 3 4 5 7 8 4.4 Connecting a radio data logger Before you connect a radio data logger to Gateway, please ensure, that the Gateway is connected to the cloud. You can check the with Saveris Restaurant Website. See chapter 5!

1. Press the button on the Gateway <3 sec. -> Sensor LED is on and Gateway is in connect/ join mode!

2. Press the button on the radio logger for < 3 sec in State OFF.

-> Blinking for 90 sec 0,2 sec on 0,8 sec off (green)

-> sensor is in manual join mode In case of finished join mode (max 90 sec) LED flashes 1x 2 sec green

-> Connection to GW OK 3. Gateway Network LED goes off 4. Connection is established and Sensor is visible with its serial number in the Software on the Online Logger page. 5 Software 5.1 Saveris Restaurant Software To get access use following URL-address https://i.food.saveris.net 5.1.1 Access Please enter your assigned account e-mail-address and password!

5.1.2 Saveris Restaurant Online/ Radio data logger website By selecting the Online data logger page, you get to the radio data logger and dashboard. 5.1.3 Measurement curves Measurement curves can be displayed by pressing the three dots or select page stationary measurements in the Analysis field In this account you can only display the data. To be able to export the data, you must switch to the MTS View Software!

5.2 MTS Viewer Software URL-address To get access use following URL-address MTS Viewer (saveris.net) Please enter your assigned account e-mail-address and password!

It is not possible to display Saveris Restaurant Account and MTS viewer of one account in parallel. 5.3 MTS-Viewer dashboard 5.3.1 Selecting Sensor Before displaying the measurement values, the relevant sensors must be selected. 5.3.2 Display of measurement data To display current measurement values, data must be loaded via button. 5.3.3 Time range These field allows to select specific time ranges for measurement analysis 5.3.4 CSV Export To get access to measurement values, the data can be exported into a csv-file. 5.4 Disable of radio data sensor or Gateway If a Gateway or sensor is connected to the cloud, the disconnecting of a sensor or gateway has to be done manually by Testo R&D team. Testo SE & Co. KGaA Celciusstrae 2 79822 Titisee-Neustadt Germany Tel.: +49 7653 681-3554 E-Mail: abaermann@testo.de 6 Battery / Sensor power supply 6.1 Lithium battery The sensor has a Lithium battery, which cannot be exchanged by customer. If battery is empty, the sensor must be replaced. 6.2 Modified sensors for power supply test To perform VCC tests Test provides modified sensors. Battery is assembled inside but not connected to PCBA. Red cable: VCC Black cable: ground Cutoff voltage: 2,2V Nominal supply voltage:3,6V Max. supply voltage: 3,8V 7 Technical data Messspezifische Daten Sensor 0572 2201-xx 0572 2202-xx 0572 2203-xx 0572 2204-xx Sensor type Ambient temperature sensor

-30...+85 C temperature product simulation

-30...+85 C

Door contact sensor Core probe Sensor 0,5 C 0,1 C 1 min -- 24 h 0,5 C 0,1 C 5 min -- 24 h 0,5 C 0,1 C 5 -- bis 24 h t90 (20K):

< 20 min 1 min -- 24 h t90 (20K):

< 20 min 1 min -- 24 h 1 min -- 24 h 1 min -- 24 h t90 (20K):

< 20 min 7.1 Radio specific data 0554 9320 2,4 GHz (IEEE 802.11 b/g/n) WPA Personal: WEP/WPA oder WPA2, WPA2 Enterprise: EAP-TTLS-MSCHAPv2, EAP-PEAP0-

MSCHAPv2, EAP-PEAP1-MSCHAPv2, EAP-TTLS-TLS, EAP-

TLS, EAP-TLS-PSK, EAP-PEAP0-PSK, EAP-PEAP1-PSK measurement range accuracy resolution Measurement cycle response time communicati on cycle WLAN-

Module radio frequency general encryption methods 7.2 Technical specifications for WLAN or Ethernet communication 7.2.1 Ethernet /DHCP For Ethernet communication please use DHCP configuration in your IT-

infrastructure. 7.2.2 Ports Ports The testo Saveris Gateway use the MQTT protocol, which communicates via the TCP 1883 and 8883 port. Furthermore, these UDP port shares are necessary:

- Port 53 (DNS name resolution)

- Port 123 (NTP time synchronization) All ports must be able to communicate only to the outside in the direction of the cloud. No bidirectional port releases are necessary 7.3 General data sensors Sensors 0572 2201-

0572 2202-xx 0572 2203-xx 0572 2204-xx xx

-30...+85 C

-30...+85 C IP67 300 measurement values 8 years* (depending on temperature measurement profile) Lithium battery 62,6 x 38 x 17,5 mm approx. 15 g 62,6 x 38 x 17,5 mm approx. 15 g 62,6 x 38 x 17,5 mm 62,6 x 38 x 17,5 mm approx. 17 g approx. 20 g x 628mm Operating temperature Storage temperature Protection class sensor Memory Battery life time Power supply dimensions Wheigt (incl. Battery) Door contact Cable length incl. metal tip Sensors 0572 2201-

0572 2202-xx 0572 2203-xx 0572 2204-xx xx x Internal Sensor External Sensor x x Gateway 0572 2200 xx 0C ...+50C 40C +60C Operating temperature Storage temperature Protection class Memory Power supply IP 67 with connected WLAN communication module IP 20 with connected Ethernet communication module none 5V DC / 2A Product Mat.-No. Model No. Country India

-Module Testo Wireless Sensor T1 IN Testo Wireless Sensor T2 IN Testo Wireless Sensor DC IN Testo Wireless Sensor T3 IN 0572 2201 06 0572 2202 06, 0572 2203 06 0572 2204 06 0572 2201 06 0572 2202 06, 0572 2203 06 0572 2204 06 Comments Approved Feature Radio range Type RF Band Output power Antenna gain Company Values up to 200 m (650 feet)

(free field) Lierda L-RFOMD40-04594-01 865 to 867 MHz 12.5 dBm max -1.13 dBi Lierda Science &

Technology Group Co., Ltd Approval and Certification The use of the wireless module is subject to the regulations and stipulations of the respective country of use, and the module may only be used in countries for which a country certification has been granted. The user and every owner has the obligation to adhere to these regulations and prerequisites for use, and acknowledges that the re-sale, export, import etc. in particular in countries without wireless permits, is his responsibility. Testo Wireless Sensor T1 EU Testo Wireless Sensor T2 EU Testo Wireless Sensor DC EU Testo Wireless Sensor T3 EU 0572 2201 01 0572 2202 01 0572 2203 01 0572 2204 01 0572 2201 01 0572 2202 01 0572 2203 01 0572 2204 01 07.06.2022 Comments Product Mat.-No. Model No. Date Country Europa +

EFTA The EU Declaration of Conformity can be found on the testo homepage www.testo.com under the product specific downloads. EU countries:

Belgium (BE), Bulgaria (BG), Denmark (DK), Germany (DE), Estonia (EE), Finland (FI), France (FR), Greece (GR), Ireland (IE), Italy

(IT), Latvia (LV), Lithuania (LT), Luxembourg

(LU), Malta (MT), Netherlands (NL), Austria

(AT), Poland (PL), Portugal (PT), Romania

(RO), Sweden (SE), Slovakia (SK), Slovenia

(SI), Spain (ES), Czech Republic (CZ), Hungary

(HU), Republic of Cyprus (CY). EFTA countries:

Iceland, Liechtenstein, Norway, Switzerland WEEE Reg. no. DE 75334352 The UK Declaration of Conformity can be found on the testo homepage www.testo.com under the product specific downloads. Feature Radio range Type RF Band Output power Antenna gain Company Values up to 200 m (650 feet)

(free field) Lierda L-RFOMD40-04594-01 865 to 868 MHz

(L-Band) 12.5 dBm max -1.13 dBi Lierda Science &

Technology Group Co., Ltd Testo Wireless Sensor T1 FCC Testo Wireless Sensors T2 FCC Testo Wireless Sensors DC FCC Testo Wireless Sensors T3 FCC 0572 2201 02 0572 2202 02 0572 2203 02 0572 2204 02 0572 2201 02 0572 2202 02 0572 2203 02 0572 2204 02 Comments 0572 2201 02 IC: 6127B-0572220102 0572 2202 02 IC: 6127B-0572220202 0572 2203 02 IC: 6127B-0572220302 0572 2204 02 IC: 6127B-0572220402 See IC Warnings 0572 2201 02 FCC ID: WAF-0572220102 0572 2202 02 FCC ID: WAF-0572220202 0572 2203 02 FCC ID: WAF-0572220302 0572 2204 02 FCC ID: WAF-0572220402 See FCC Warnings Feature Radio range Type RF Band Modulation Output power Transm. rate Antenna gain Antenna Part Number Company Values up to 200 m (650 feet)

(free field) Lierda L-RFOMD40-04594-01 915 to 928 MHz GFSK 12.5 dBm 50 kBit/s max -1.13 dBi 0263 0009 Lierda Science &

Technology Group Co., Ltd United Kingdom

(UK)

-Module Product Mat.-No. Model No. Country Canada USA

-Module IC Warnings CAN ICES-003(B)/NMB-003(B):

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. RSS-Gen & RSS-247 statement:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-

exempt RSS(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage

(2) l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Caution: Radio Frequency Radiation Exposure This equipment complies with radio frequency exposure limits set forth by the Innovation, Science and Economic Development Canada for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders. Co-Location:

This device must not be co-located or operated in conjunction with any other antenna or transmitter. Attention : exposition au rayonnement de radiofrquences Cet quipement est conforme aux limites d'exposition aux radiofrquences dfinies par la Innovation, Sciences et Dveloppement conomique Canada pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre le dispositif et l'utilisateur ou des tiers Co-location Ce dispositif ne doit pas tre utilis proximit dune autre antenne ou dun autre metteur. FCC Warnings Information from the FCC (Federal Communications Commission) For your own safety Shielded cables should be used for a composite interface. This is to ensure continued protection against radio frequency interference. FCC warning statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded interface cable must be used in order to comply with the emission limits. Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Radio Frequency Radiation Exposure This equipment complies with radio frequency exposure limits set forth by the FCC for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders. Co-Location:

This device must not be co-located or operated in conjunction with any other antenna or transmitter. Product Testo Wireless Sensor T1 CN Testo Wireless Sensor T2 CN Testo Wireless Sensor DC CN Mat.-No. Testo Wireless Sensor T3 CN 0572 2201 03 0572 2202 03 0572 2203 03 0572 2204 03 Model No. 0572 2201 03 0572 2202 03 0572 2203 03 0572 2204 03 Country China

-Module

Comments Approved Feature Radio range Type RF Band Company Values up to 200 m (650 feet)

(free field /) Lierda L-RFOMD40-04594-01 868.0 to 868.6 MHz Lierda Science &

Technology Group Co., Ltd

Wireless Sensor 12 (822) Order No.: 0572 2202 02 Model: 0572 2202 02 SN: 0056000000 Measuring: -30...+85C FCC ID: WAF-0572220202 HSE) IC: 6127B-0572220202 IP67 www.testo.com

& A FE Testo SE & Co. KGaA Celsiusstr. 2, 79822 Titisee-Neustadt Germany NSF Protocol P235 Temperature Mimicking Sensors Temperature mimicking sensor are not intended to monitor the air temperature of the refrigerated location in which they are being used. S15MHz

Testo SE & Co. KGaA Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: WAF-0572220202 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type

(Block Diagram, Schematics, Operational Description) File Name

(Block Diagram.pdf, Schematics.pdf, Operational Description.pdf) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below:

File Name

Exhibit Type

Sincerely, Signature: i.A. printed name: Christian Schwaer Date: July 13, 2022 Testo SE & Co. KGaA, HQ Titisee-Neustadt, Commercial Register Freiburg i. Br. HRB 715057; Supervisory Board Chairperson: Jrgen Hinn. General Partner: Testo Management SE, HQ Titisee-Neustadt, Commercial Register Freiburg i. Br. HRB 714984;

Directors: Prof. Burkart Knospe (CEO), Antje Leminsky, Eckhard Kloth, Peter Kruter, Ivan Sokolov; Supervisory Board Chairperson: Jrgen Hinn

Testo SE & Co. KGaA Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: July 13, 2022 SUBJECT: FCC Application for (FCC ID: WAF-0572220202) To Whom It May Concern:

We, the undersigned, hereby authorize Mina Xu at Centre Testing International Group Co., Ltd / Building C, Hongwei Industrial Park Block 70, Bao'an District, Shenzhen, China on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Mina Xu at Centre Testing International Group Co., Ltd / Building C, Hongwei Industrial Park Block 70, Bao'an District, Shenzhen, China on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Signature: i.A. printed name: Christian Schwaer Testo SE & Co. KGaA, HQ Titisee-Neustadt, Commercial Register Freiburg i. Br. HRB 715057; Supervisory Board Chairperson: Jrgen Hinn. General Partner: Testo Management SE, HQ Titisee-Neustadt, Commercial Register Freiburg i. Br. HRB 714984;

Directors: Prof. Burkart Knospe (CEO), Antje Leminsky, Eckhard Kloth, Peter Kruter, Ivan Sokolov; Supervisory Board Chairperson: Jrgen Hinn

Testo SE & Co. KGaA Federal Communications Commission Date: 2022-07-13 Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC SDoC declaration for FCC ID: WAF-0572220202 To Whom it may concern, We, as the grantee of this project, would like to declare that this device has been tested according to the FCC requirement and found compliant with the following standards: FCC Part 15 Subpart B. Product Name

: Wireless Sensor T2 Brand Name

: Testo Model Name

: 0572 2202 02 Testing Lab

: Centre Testing International Group Co., Ltd Sincerely, Signature: i.A.________________________________ Company Name

: Testo SE & Co. KGaA Name Job Title E-mail Tel.

: Christian Schwaer

: Global access manager

chschwaer@testo.de

: +49(0)7653681 Extension: 2601 Testo SE & Co. KGaA, HQ Titisee-Neustadt, Commercial Register Freiburg i. Br. HRB 715057; Supervisory Board Chairperson: Jrgen Hinn. General Partner: Testo Management SE, HQ Titisee-Neustadt, Commercial Register Freiburg i. Br. HRB 714984;

Directors: Prof. Burkart Knospe (CEO), Antje Leminsky, Eckhard Kloth, Peter Kruter, Ivan Sokolov; Supervisory Board Chairperson: Jrgen Hinn