Setting up the TI-Nspire Navigator Teacher Software The TI-Nspire Navigator System provides the hardware and software tools needed to set up a wireless classroom network. In a wireless classroom environment, the TI-Nspire Navigator Teacher Software enables you to:
Use Quick Poll to send polls to students, receive student responses, and review the poll results with students. Use Screen Capture to capture screens from student handhelds or computers automatically, or at specific time intervals. Use Live Presenter to display work as it is being performed on your handheld screen, or on a student handheld screen. Use the Review Workspace to collect and review student assignments, watch results in real time as students answer questions, and analyze data for the entire class or for individual students. About the Hardware Depending on classroom requirements, your TI-Nspire Navigator System may include the following hardware, which is used to create a wireless communications network so that your computer can communicate with student handhelds:
Hardware Name TI-Nspire Wireless Network Adapter TI-Nspire CX Wireless Network Adapter v2 Image Use Attaches to the TI-Nspire CX and TI-Nspire CXCAS handhelds to enable wireless communication over a 2.4GHz band. Attaches to the TI-Nspire CX and TI-Nspire CXCAS handhelds to enable wireless communication over a 2.4GHz or 5GHz band. DRAFT SettinguptheTI-NspireNavigatorTeacherSoftware 1 Hardware Name TI-Nspire Navigator wireless cradle Image Use Attaches to all TI-Nspire CX and TI-Nspire handhelds to enable wireless communication over a 2.4GHz band. TI-Nspire Navigator access point TI-Nspire CX Navigator access point Connects to the teacher computer to provide a 2.4GHz wireless communication link. Connects to the teacher computer to provide either a 2.4GHz or 5GHz wireless communication link. 2 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT BeforeYouBegin When you launch a new version of the TI-Nspire Navigator Teacher Software for the first time, the TI-Nspire Navigator System Startup wizard opens and guides you through the automated process to set up your wireless classroom. Before you begin the wireless set up process:
Make sure you have installed and activated the TI-Nspire Navigator Teacher Software on your computer. If you are using TI-Nspire Navigator wireless cradles, make sure each LEDis solid amber or solid green). cradle is charged (
Note:If you are using TI-Nspire wireless network adapters, you do not need to charge them. The wireless network adapters are powered by the handhelds. Disconnect the TI-Nspire Navigator access point or TI-Nspire CX Navigator access point from your computer. Automated System Startup When you launch the software, the Startup wizard will guide you through the steps needed to:
Update all student and classroom handhelds to the latest operating system
(OS)version. The OS on the handhelds must match the software version installed on your computer. Important! When updating the OS, handhelds must be connected to the computer using a USB cable or TI-Nspire CXDocking Station. Connect the access point and, if needed, update the access point firmware. Name the class network. If required, select a channel for the access point. Add wireless clients to your network. Create a backup copy of the class network configuration. SettinguptheTI-NspireNavigatorTeacherSoftware 3 DRAFT ChargingtheCradles The TI-Nspire Navigator wireless cradles contain rechargeable batteries. You must charge the batteries overnight before using them in class. When the cradles are fully charged, they will function all day under continuous use. You should recharge them each night. The TI-Nspire Navigator Cradle Charging Bay can hold from one to five cradles. After you place the cradles in the charging bay, they are charged simultaneously until all are fully charged. If the batteries are fully discharged, it may take up to 12 hours to fully charge the batteries. Note: You cannot damage the batteries by leaving them in the charging bay beyond the time needed to fully charge them. Also, it is not necessary to fully discharge the batteries before recharging them. Make sure you have enough (3 to 4) power outlets for the equipment you received. If necessary, obtain a power strip so that you have plenty of grounded outlets. 1. Insert the small end of the AC9940 power adapter cord into the charging bays power jack. 4 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT 2. Plug the other end of the adapter into a power outlet. 3. Insert each TI-Nspire Navigator Cradle into the TI-Nspire Navigator Cradle Charging Bay. Make sure the LED is amber. Note: You can charge a single wireless cradle using an AC9926 adapter (sold separately). Checking the LEDs Two LEDs (small lights) at the top of each TI-Nspire Navigator wireless cradle blink or change colors to indicate various operations or status. LEDs The charging status. LED indicates network activity. The LED indicates battery-
When the cradles are still in the TI-Nspire Navigator Cradle Charging Bay:
A solid amber LED means the wireless cradle is currently recharging. SettinguptheTI-NspireNavigatorTeacherSoftware 5 DRAFT LED means the wireless cradle does not have good A solid red contact with the charging bay. Reposition the cradle to establish good contact and the LED turns amber. A solid green LED means the wireless cradle is fully charged. UpdatingtheHandheldOperatingSystem When installing or updating the TI-Nspire Navigator Teacher Software, the Startup dialog box opens when you launch the software for the first time. You must update all student and classroom handhelds to the latest operating system. Complete the following steps to ensure all handhelds are updated. 1. Disconnect the access point if it is connected to your computer. 2. Connect the handhelds to the computer. 6 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT You must connect handhelds using a USB cable or connect multiple handhelds using TI-Nspire docking stations. 3. Click Detect handheld OS. If the OS for all connected handhelds matches the software version, the Handheld OS Update dialog box is displayed informing you that all handhelds are up to date. Click Close to return to the Startup dialog box. If the OS on the connected handhelds is not current, the Handheld OSUpdate Required dialog box is displayed. Click Update OS. The Add to Transfer List dialog box opens. The matching OSfiles are transferred to the connected handhelds. You can update TI-Nspire CX handhelds and TI-Nspire handhelds at the same time. If you cannot connect all handhelds at one time, connect as many as possible and update the OS. After the OS update is complete, disconnect the handhelds and repeat the OS update process until all handhelds are updated. The software will detect the OS needed and begin the transfer as you connect the handhelds. Click Done to stop the transfer process when all handhelds are updated. SettinguptheTI-NspireNavigatorTeacherSoftware 7 DRAFT -
-
The Add OS Transfer List closes. The Start Up dialog box is displayed. 4. Select the All my handhelds are updated to version 3.6 check box. 5. Click Next. The ConnectAccess Point dialog box opens. ConnectingtheTI-NspireNavigatorAccessPoint When the operating system update on all handhelds is complete, the next step in the system startup process is to connect the access point. When you connect the access point to your computer, it is powered on and ready to communicate with wireless network adapters and cradles. 1. Connect the access point to the computer using a USB cable. a) Connect the small end of the USB cable to the access point. Connect the access point directly to your computer. Do not connect the access point to a USB hub or docking station. b) Connect the other end of the cable to the USB port on your computer. c) Make sure the access point power light is on. The power light indicates that the access point is receiving power from the computer. The signal light indicates wireless link activity. 8 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT TI-NspireNavigatoraccesspoint TI-NspireCXNavigatoraccesspoint Note:If the software does not detect a connected access point within one minute, an error message is displayed. Close the error message, and then disconnect and reconnect the access point. 2. Click Next. The software detects the access point type and checks the firmware version on the access point. If a newer firmware version is available, the software updates the firmware. Note: It may take up to 60 seconds for the software to detect the access point. Important! Do not stop the update process or disconnect the access point until the firmware update is complete. When the update is complete, the software checks the access point for a configured classroom network. If classes exist, the software asks if you want to keep the current setup or make changes. If no classes exist, the Class Network Setup wizard opens. Note: You can set up a network at any time, or make edits to an existing network, by using the Network Manager. Troubleshooting If the firmware update fails, the OSWarning dialog box opens. SettinguptheTI-NspireNavigatorTeacherSoftware 9 DRAFT To resolve the problem, disconnect and reconnect any cables connected to the access point, and the software will automatically start the update process. If this does not resolve the issue, contact Customer Support. ConfirmingHandheldOSVersion If you did not update handhelds during startup, the wizard asks you to confirm that classroom and student handhelds are updated to the latest OSversion. The OS version on the handhelds must match the software version before you can set up the class network. To check the OSversion on a handheld, 10 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT 1. Press c to turn the handheld on. 2. Select Settings >Status to open the Handheld Status window. 3. Make sure the OSon the handheld matches the software version on your computer. If the OS version is current, select Yes. If the OS version is not current select No. 4. Click Next. If the OS version was not current, the Handheld OSUpdate Required dialog box is displayed. Click Update OS to open the Add OSTransfer Tool and update the handhelds. If the OS version is current, the Class Network Name dialog box opens and you can continue the process to set up the class network. NamingtheClassNetwork When the Class Network Name dialog box opens, complete the following steps to name your class network. SettinguptheTI-NspireNavigatorTeacherSoftware 11 DRAFT 1. Type the name you want to assign to the class network in the TI-NAV-N field. Use a name that is unique, easy to remember, and easy for you to identify. The class network name can be up to 22 characters long. Names can consist of letters, numbers, and spaces; but cannot contain special characters such as ?"$\![]+. 2. Click Next to configure the access point with no changes. or 3. Click Advanced to select a different band or operating channel. If the TI-Nspire Navigator access point connected, you can select a different operating channel. is 12 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT If the TI-Nspire CX Navigator access point can select either a 2.4GHz band or 5GHz band, and you can select a different operating channel. Note: Operating channels available for selection are determined by the installed software version. is connected, you SettinguptheTI-NspireNavigatorTeacherSoftware 13 DRAFT Important! If you are using the TI-Nspire CX Navigator network adapter v2adapters, you can select either the 2.4GHz or 5GHz band. If you have a mixture of wireless network adapters, you must select the 2.4GHz band. 4. Click Done. The Configuring the Access Point dialog box opens and the software configures the access point and applies the class network name. Important! Do not disconnect the access point while it is being configured. 14 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT When the configuration process is complete, you can associate your wireless clients. AddingWirelessClientstotheNetwork After you assign a name to your class network and the access points are configured, you must associate your wireless clients (wireless adapters and wireless cradles) with the network. How you complete this process depends on whether you have docking stations that enable you to work with multiple handhelds and wireless clients at one time. If you have a docking station, attach the adapters to the handhelds, and then insert the handhelds into a docking station that is connected to your computer. You can link two additional docking stations to the connected docking station. If you do not have a docking station, attach the wireless adapters or cradles to the handhelds. SettinguptheTI-NspireNavigatorTeacherSoftware 15 DRAFT 1. When the wireless adapters or cradles are attached to the handhelds, click Next. The Add Wireless Clients to Class Network dialog box opens. The access point finds the available clients and lists them in the Available Clients box. It can take up to six minutes for the access point to find all available clients. Check the number of available clients to ensure all clients are listed. 16 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT 2. Select the wireless clients you want to add to the class network. To add all available clients listed, click Add All. To add specific clients, select one client ID at a time, and then click Add. Important! Clients are not part of the class network until you complete this step to add them. 3. Click Next to associate the wireless clients with the classroom network. SettinguptheTI-NspireNavigatorTeacherSoftware 17 DRAFT The software associates the attached wireless clients with the classroom network. When the process is complete, the Setup Complete dialog opens. 4. Select Back up my class network to save a copy of your classroom network configuration. The saved network information includes the list of wireless client IDs, the network name, and the channel and country selected on the access point. Saving a network enables you to reload the configuration at a later time using the TI-Nspire Network Manager. By default, the file is saved in the My Documents/TI-Nspire/Navigator Network folder. To finish without saving a backup copy, select Skip backup. 18 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT 5. Click Finish to complete the TI-Nspire Navigator System setup. Note:You can add more wireless adapters or cradles to the class network at a later time using the TI-Nspire NetworkManager. ConnectingtheHandheldstotheWirelessAdapters The wireless network adapters work with the TI-Nspire CX and TI-Nspire CX CAS handhelds. To connect the handheld to a wireless adapter, follow these steps. 1. Position the wireless adapter on top of the handheld so the connector on the adapter lines up with the connector on top of the handheld. Connector Guides for aligning with handheld Grooves to align wireless adapter 2. Slide the adapter into position, making sure the guides on the sides of the adapter slide into the grooves on the sides of the handheld. 3. Firmly press the adapter into place. SettinguptheTI-NspireNavigatorTeacherSoftware 19 DRAFT ConnectingtheHandheldstoCradles The wireless cradles work with the TI-Nspire, TI-Nspire CAS, TI-Nspire CX and TI-Nspire CX CAS handhelds. To connect the handheld to a cradle, follow these steps. 1. Slide the lock on the back of the cradle to the OFF position. 20 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT 2. To attach the handheld, face the screen upward and slide the handheld onto the top of the wireless cradle. Be sure that both sides of the handheld are inserted into both of the side guides. 3. Press firmly to make a good connection. When properly connected, the handheld appears to be sitting on top of the cradle. 4. Lock the handheld in place by sliding the lock on the back of the cradle to the ON position. SettinguptheTI-NspireNavigatorTeacherSoftware 21 DRAFT 5. Insert each cradle into the charging bay. Make sure the LED is amber. 22 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT At the end of the school day, return the wireless cradle to the charging bay and charge them overnight. The cradles are charged when all the status) LEDs are solid green or amber.
(power CreatingandManagingYourTeacherAccount Create your teacher account in the Teacher Preferences section of the TI-Nspire Navigator Teacher Software. A teacher account lets you log in to the TI-Nspire Navigator network from your handheld. After you create a teacher account, you can later change your password or your user name. Creating Your Teacher Account 1. Use the Workspace selector to choose the Class workspace. 2. Click File> Settings> Teacher Preferences The Teacher Preferences dialog box opens. 3. Type a username. 4. Type a password. 5. Select or clear the preference for the teacher icon to appear in the classroom view. If you select this preference, the teacher icon will appear in the classroom view, and you will be included as a recipient in Send to Class, Collect from Class, and Delete from Class operations. The teacher handheld screen will be included in screen captures of the class. SettinguptheTI-NspireNavigatorTeacherSoftware 23 DRAFT 6. Select or clear the options to randomize the order in Screen Capture, and to individualize the teacher handheld in Screen Capture. Randomize order in Screen Capture. Selecting this option captures and displays student screens in a random order, not the order on the class listing. This enables students to concentrate on the assignment, not whose screen they are viewing. Individualize Teacher Handheld in Screen Capture. Selecting this option shows the teachers screen in the screen capture. 7. Click OK. Changing the Password of Your Teacher Account 1. Make sure you are not logged in to the TI-Nspire Navigator network on your handheld. 2. Click File> Settings> Teacher Preferences The Teacher Preferences dialog box opens. 3. Click Reset. TI-Nspire Navigator software clears the current password. 24 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT 4. Type a new password. 5. Click OK. Changing the User Name of Your Teacher Account 1. Make sure you are not logged in to the TI-Nspire Navigator network on your handheld. 2. Click File> Settings> Teacher Preferences The Teacher Preferences dialog box opens. 3. Enter a new user name. 4. Click OK. SettinguptheTI-NspireNavigatorTeacherSoftware 25 DRAFT LoggingIntotheTI-NspireNavigatorSystemfromthe Handheld The TI-Nspire Navigator classroom learning system uses both your computer and student handhelds. For you and your students to communicate using the TI-Nspire Navigator network, students must log in to the network from their handhelds. Note: You do not have to log in to communicate with student handhelds; you can use the Transfer Tool to delete files or send files and operating systems to student handhelds. However, if you plan to participate from your handheld during the TI-Nspire Navigator class session, then you must log in to the TI-Nspire Navigator network from your handheld. For more information on using a handheld, refer to the handheld guidebooks available at education.ti.com/guides. Before you log in, make sure these items are ready:
You have created your teacher account in Teacher Preferences. You have started a class session on your computer. The TI-Nspire handheld is ready for login. (The blinking.) icon is Before your students log in, make sure you complete these items:
Create student accounts. Provide students with the class network name, their user names and, if necessary, their passwords. Logging In to the TI-Nspire Navigator Network 1. To log in, do one of the following:
From the Home screen of your TI-Nspire handheld, select 5:Settings> 5:Login. From a screen other than the Home screen, press ~ > 8:Login. The last network the wireless client was associated with appears on the handheld screen. Note: If the handheld is connected to the computer with the USB cable, no network names appear on the screen, and you can continue logging in. 26 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT 2. If the name of the network that appears is correct, continue with login. If the network is not correct, click Network. The handheld screens displays all networks it has been connected to, and also displays other networks within range. 3. Select the network from the list, and then click Connect. The login screen shows the connection status and displays the network name when the connection is successful. 4. Type your username and password. 5. Select Login. The Login Successful screen opens. 6. Click OK. SettinguptheTI-NspireNavigatorTeacherSoftware 27 DRAFT TI-Nspire Handheld Login Status Icons The icons on the TI-Nspire CX, TI-Nspire CX CAS, TI-Nspire, and TI-Nspire CAS handheld screens indicate the communication status between the handheld and the access point, wireless adapter, wireless cradle, or TI-Navigator network. The icons indicate status as follows. Icon Status Meaning No icon If no icon appears on the handheld, the handheld is not searching for an access point. Unattach and reattach the wireless adapter or cradle. Blinking The handheld is searching for an access point. Solid Solid The handheld has found an access point. The handheld is not communicating with the adapter or cradle. Remove the handheld from the adapter or cradle, wait for the icon to disappear, and then reattach the handheld to the adapter or cradle. Blinking The handheld is connected to the network and is ready to login. Solid The handheld is logged in to the network. StoringtheWirelessAdaptersandCradles When you charge the handhelds overnight, you can leave the wireless network adapters attached to the handhelds before placing the handhelds in the TI-Nspire CX Docking Station. When you are ready to use the handhelds the next morning, the handheld should be fully charged, and the adapter is ready for use. You can remove the wireless adapter from the handheld, and store the adapters in the adapter storage case overnight. 28 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT If you need to store the wireless adapters for more than two weeks, remove the wireless adapter from the handheld, and store the adapters in the adapter storage case. Place the storage case in a cool, dry place. If you need to store the TI-Nspire Navigator wireless cradles for more than two weeks, remove the handhelds from the cradles, and store the cradles in a cool, dry place. You cannot damage the batteries by leaving them in the charging bay beyond the time needed to fully charge them, or by leaving them in the charging bay while the charging bay is unplugged. UsingTI-NspireNetworkManager Accessing the TI-Nspire Network Manager Click Tools >Network Manager. The TI-Nspire Network Manager opens. Note: Click window. Refresh at any time to refresh the TI-Nspire Network Manager Opening the Network Setup Wizard You can set up or edit a classroom network at any time using the Network Setup Wizard. In the TI-Nspire Network Manager window, click Network Setup Wizard. The wizard guides you through the process of setting up a classroom network, including:
SettinguptheTI-NspireNavigatorTeacherSoftware 29 DRAFT Update all student and classroom handhelds to the latest operating system (OS)version. The OS on the handhelds must match the software version installed on your computer. Connect the access point and, if needed, update the access point firmware. Name the class network. If required, select a channel for the access point. Add wireless clients to your network. Create a backup copy of the class network configuration. Checking Network Status The network status is shown in the side bar of TI-Nspire Network Manager window. Note:If the sidebar is hidden, click View >Sidebar. Click Refresh to update the status if the Network Manager is already open. The network status shows the following information:
Access Point. Shows whether the AP is connected or disconnected. Network Name. The name you gave the network when you set it up. Channel. The access point operating channel for the current network. Band. The selected communication link. Firmware. The version of the access point. MAC Address. The Media Access Control address that identifies the access point. 30 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT After you have set up the network, all of the adapters or cradles you added appear in the TI-Nspire Network Manager window. If the wireless adapter or cradle is charged and attached to a TI-Nspire handheld that is powered on, TI-Nspire Network Manager shows the status as connected. It may take up to 30 seconds to recognize the wireless client and show its status as connected. The status window also displays the battery status and signal strength. If the cradle is not charged, or the adapter or cradle is not connected to a TI-Nspire handheld that is powered on, TI-Nspire Network Manager displays the status as disconnected. TI-Nspire Network Manager remembers the adapter and cradle IDs you added, and the next time you turn on a handheld that is connected to the adapter or cradle, TI-Nspire Network Manager recognizes it. Cradle LEDs The LEDs on each TI-Nspire Navigator wireless cradle use various colors and blink patterns to indicate data activity or power status. This can occur either when the cradles are seated in the charging bay or when they are outside the charging bay. The LEDs indicate status as follows. Activity LED Color and pattern Meaning Blinking green Indicates data transfer to and from the access point. Battery (Power Status) LED Meaning Color and pattern In the charging bay SettinguptheTI-NspireNavigatorTeacherSoftware 31 DRAFT Color and pattern Solid amber Solid green Solid red Meaning The battery is charging. Power on; charged and powered by a charging bay or power adapter. The battery is charging, but does not have good contact with the charging bay. Reposition the cradle so it has good contact. The LED should then turn amber to indicate it is recharging. Outside the charging bay Blinking green Blinking amber Blinking red Power on; battery powered. The battery is 30% to 99% charged. Low battery (less than 30% charged). Battery is critically low (less than 8% charged). Manually Adding Wireless Clients You can manually add wireless adapters or wireless cradles at any time. When you add a wireless adapter or cradle manually, it immediately appears in the TI-Nspire Network Manager window. 1. In the TI-Nspire Network Manager window, click Manually Add Wireless Client(s). The Add Wireless Clients by ID Number dialog box opens. 32 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT 2. For each wireless adapter or cradle you are adding, find the ID number on the back of the adapter or cradle, and type it in the Wireless Client ID box. The ID is the last six digits of the eight-digit number (ignore the first two zeros). 3. Enter a nickname in the Wireless Client Nickname box (optional). Nicknames can consist of letters, spaces, and numbers. A nickname must contain a minimum of 1 character and can contain a maximum of 64 characters. 4. Click Add Next to add another adapter or cradle if you have more than one wireless client to add. 5. When you are finished adding all the adapters and cradles, click Finish. After you manually add wireless clients, you need to associate them to the network using the handhelds. 6. Turn on each TI-Nspire handheld. 7. Attach the wireless adapter or the wireless cradle to each handheld. (See the instructions for connecting wireless adapters or cradles to a TI-Nspire handheld.) 8. From the Home screen of the TI-Nspire handheld, select 5:Settings>
6:Network. The handheld lists the available networks that are within range. SettinguptheTI-NspireNavigatorTeacherSoftware 33 DRAFT 9. Select the network you added the wireless clients to, and click Connect. The wireless clients are now associated with the access point. Changing the Operating Channel 1. In the TI-Nspire Network Manager window, click Change Operating Channels. The Advanced Access Point Options dialog box opens. 34 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT Important! If you are using the TI-Nspire CX Navigator network adapter v2adapters, you can select either the 2.4GHz or 5GHz band. If you have a mixture of wireless network adapters, you must select the 2.4GHz band. 2. Select a different channel from the drop-down box. 3. Click Done. The Configuring the Access Point dialog box opens and the software configures the access point. Saving a Network Setup Saving a network setup enables you to reload the configuration at a later time using the TI-Nspire Network Manager. The saved network information includes the list of wireless client IDs, the network name, and the channel and country selected on the access point. By default, the file is saved in the My Documents/TI-Nspire/Navigator Network folder. 1. In the TI-Nspire Network Manager window, click Actions >Save Network Setup. The Save dialog box opens. 2. Name the network and then click Save. You can save the file to another location, if desired. Reusing a Saved Network Reusing a saved network enables you to reload the configuration of a saved network. Reusing a network can save time because you do not have to set up the network again. 1. In the TI-Nspire Network Manager window, click Actions >Apply Saved Network Setup. The Apply a Network dialog box opens. 2. Select the network and then click Apply a Network. 3. The access point is configured with the saved network configuration. Identifying Wireless Clients To identify wireless clients that are not responding, complete the following steps. 1. From the list of hardware components in the TI-Nspire Network Manager window, click to select the wireless clients. To select more than one SettinguptheTI-NspireNavigatorTeacherSoftware 35 DRAFT wireless client, press and hold the Shift or Ctrl key (Mac: key), and click the items you want to select. 2. Click Actions > Identify Selected. 3. Look around your classroom. If you are using cradles, both LEDs on the cradles that you selected will blink rapidly with a green color. If you are using a docking station, both LEDs on the docking station will blink rapidly with a green color. You can identify the wireless clients that are not working because their LEDs are not blinking. Now that you know where the non-working wireless clients are, you can add them to the network again. Removing Wireless Clients To remove adapters or cradles from the class network, complete the following steps. 1. In the TI-Nspire Network Manager window, select the wireless adapters and cradles that you want to remove from the network. 2. Click Actions > Removed Selected, or click 3. When prompted, click Remove. The selected wireless clients are removed from the list. Resetting the Access Point to Factory Default Settings 1. In the TI-Nspire Network Manager window, click Actions > Set Default Factory Settings to Access Point. The access point is reconfigured to the default factory settings. 2. Click OKwhen the confirmation message is displayed. 36 SettinguptheTI-NspireNavigatorTeacherSoftware DRAFT USA FCC Information Concerning Radio Frequency Interference Product Name TI-Nspire Navigator Wireless Cradle TI-Nspire Navigator Access Point TI-Nspire CX Wireless Network Adapter TI-Nspire CX Navigator Access Point FCCID V7R-TINAVWC2 V7R-TINAVAP2 V7R-TINAVWNA V7R-TINAVAP3 TI-Nspire CX Navigator Wireless Network Adapter v2 V7R-TINAVWNA2 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: The following products comply with Part 15 of the FCC Rules. TI-Nspire CX Wireless Network Adapter TI-Nspire CX Wireless Network Adapter v2 TI-Nspire Navigator Wireless Cradle TI-Nspire Navigator Access Point TI-Nspire CX Navigator Access Point USAFCCInformationConcerningRadioFrequencyInterference 37 DRAFT Operation is subject to the following two conditions: (1) These devices may not cause harmful interference, and (2) these devices must accept any interference received, including interference that may cause undesired operation. The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. RF Radiation Exposure and Hazard Statement:
To ensure compliance with Federal Communications Commission (USA) requirements, (SAR limit is 1.6 W/kg averaged over one gram of tissue), the products listed in the following table have been evaluated under FCC Bulletin OET 65C and found to be compliant with the requirements in 47 CFR Part 2.1093 for RF exposure from radio frequency devices. The highest SAR value reported under this standard during product certification when worn on the body:
Product Name TI-Nspire Navigator Wireless Cradle TI-Nspire Navigator Access Point TI-Nspire CX Wireless Network Adapter TI-Nspire CX Navigator Access Point TI-Nspire CX Navigator Wireless Network Adapter v2 SARValue 0.455W/kg 0.995W/kg 0.944W/kg 0.433W/kg 0.685W/kg Using higher gain antennas and types of antennas not covered under the FCC certification of this product is not allowed. Installers of the radio and end users of the product must adhere to the installation instructions provided in this manual. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Non-modification Statement:
Use only the integral antenna supplied by the manufacturer when operating these devices. Unauthorized antennas, modifications, or attachments could damage the TI-Nspire Navigator Cradle, TI-Nspire Navigator Access Point, TI-Nspire CX Wireless Network Adapter, TI-Nspire CX Navigator Access Point, or TI-Nspire CX Navigator Network Adapter v2and violate FCC regulations. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 38 USAFCCInformationConcerningRadioFrequencyInterference DRAFT Deployment Statement:
This product is certified for indoor deployment only. Do not install or use this product outdoors. FCCStatement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void the users authority to operate the equipment under FCC rules. DRAFT USAFCCInformationConcerningRadioFrequencyInterference 39 Canadian IC Information Product Name TI-Nspire Navigator Wireless Cradle TI-Nspire Navigator Access Point TI-Nspire CX Wireless Network Adapter TI-Nspire CX Navigator Access Point IC 451E-TINAVWC2 451F-TINAVAP2 451E-TINAVWNA 451F-TINAVAP3 TI-Nspire CX Navigator Wireless Network Adapter v2 451F-TINAVWNA2 Industry Canada Statement:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. To ensure compliance with Industry Canada requirements, (SAR limit is 1.6 W/kg averaged over one gram of tissue), these products have been evaluated and found compliant in accordance with Industry Canada RSS-
102 with respect to the Safety Code 6 for Human Exposure to RF Fields. The highest SAR value reported under this standard during product certification when worn on the body:
Product Name TI-Nspire Navigator Wireless Cradle TI-Nspire Navigator Access Point TI-Nspire CX Wireless Network Adapter TI-Nspire CX Navigator Access Point SARValue 0.455W/kg 0.995W/kg 0.944W/kg 0.433W/Kg TI-Nspire CX Navigator Wireless Network Adapter v2 0.685W/Kg Equipment (or its transmit antenna) that is installed outdoors is subject to licensing and not supported by the listed products. More information may be found in RSS-102 (
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html) and in Canadas 40 CanadianICInformation DRAFT Safety Code 6 (http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_ guide-lignes_direct-eng.php). Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.)is not more than that necessary for successful communication. The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. Industrie Canada Dclaration :
Ce dispositif est conforme la norme (s) RSS de la licence-exonr Industrie Canada. Opration est soumise aux deux conditions suivantes :
1. Ce dispositif ne peut pas causer de brouillage, et 2. Ce dispositif doit accepter toute interfrence, y compris le brouillage qui peut causer intempestif de fonctionnement du dispositif. Pour assurer la conformit avec les exigences d'Industrie Canada, (limite de Das est de 1,6 W/kg en moyenne pour un gramme de tissu), ces produits ont t valus et jugs conformes conformment Industrie Canada, CNR-102 en ce qui concerne le Code de scurit 6 pour l'exposition humaine aux champs RF. La valeur SAR la plus leve signale en vertu de cette norme lors de la certification du produit lorsqu'il est port sur le corps :
Nom du produit TI-Nspire Navigator Wireless Cradle TI-Nspire Navigator Access Point TI-Nspire CX Wireless Network Adapter TI-Nspire CX Navigator Access Point SARVerdien 0.455W/kg 0.995W/kg 0.944W/kg 0.433W/Kg TI-Nspire CX Navigator Wireless Network Adapter v2 0.685W/Kg quipement (ou son antenne de transmission) qui est install l'extrieur est soumis licence et pas pris en charge par les produits numrs. DRAFT CanadianICInformation 41 On trouvera plus d'informations dans le CNR-102
(http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html) et dans Code de scurit 6 notre (http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-
lignes_direct-eng.php). En vertu de la rglementation d'Industrie Canada, cet metteur radio risquera uniquement l'aide d'une antenne de type et de gain maximum (ou moins) pour l'metteur a t approuv par Industrie Canada. Pour rduire les interfrences radio potentielles d'autres utilisateurs, le type d'antenne et son gain doivent tre choisie que la puissance isotrope rayonne quivalente
(p.i.r.e.) n'est pas plus que celui ncessaire une communication efficace. Le dispositif pour la bande 5150-5 250 MHz est seulement pour utilisation intrieure rduire le risque de brouillage prjudiciable aux systmes mobiles par satellite dans la mme voie. 42 CanadianICInformation DRAFT Mexico - Declaration of Conformity Marking by this symbol:
indicates that the following listed equipment meets the operating conditions and technical characteristics established in the Mexican Official Standard NOM-121-SCT1-2009 radio systems using spread spectrum technique-
hopping radio equipment frequency and digital modulation operating in the bands 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. TI-Nspire Navigator Access Point TI-Nspire Navigator Wireless Cradle TI-Nspire CX Wireless Network Adapter TI-Nspire CX Navigator Access Point Mexico-DeclarationofConformity 43 DRAFT European Union and EFTA Regulatory Compliance This equipment may be operated in the countries that comprise the member countries of the European Union and the EFTA(European Free Trade Association). These countries, listed in the following paragraph, are referred to as The European Community throughout this document:
AUSTRIA, BULGARIA, CZECH REPUBLIC, DENMARK, FINLAND, FRANCE, GERMANY, GREECE, IRELAND, ITALY, LUXEMBOURG, NETHERLANDS, NORWAY, PORTUGAL, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, SWITZERLAND, UNITED KINGDOM The TI-Nspire Navigator Access Point communicates with either a TI-Nspire Navigator wireless cradle or TI-Nspire CX Wireless Network Adapter via a wireless 802.11b/g link to provide wireless local area networking
(WLAN) capabilities and with a personal computer using a USB cable. TI-Nspire Navigator Access Point includes one 802.11b/g/n radio. The TI-Nspire Navigator CXAccess Point communicates with either a TI-Nspire Navigator wireless cradle, TI-Nspire CX Wireless Network Adapter, or TI-Nspire CX Wireless Network Adapter v2via a wireless 802.11b/g link to provide wireless local area networking (WLAN) capabilities and with a personal computer using a USB cable. TI-Nspire Navigator CXAccess Point supports 2.412GHz to 2.462GHz for 802.11b/g/n 2.4GHz operation + 5.150 GHz to 5.250GHz for 802.11 a/n 5GHz operation. Declaration of Conformity Marking by this symbol:
indicates compliance with the Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC). This equipment meets the following conformance standards:
Safety: EN 60950-1:2006 + A11:2009 EMC: EN 55022:2006, EN 55024:1998 + A1:2001 + A2:2003, N 301 489-1 V1.8.1/2008-4, EN 301 489-17 V2.1.1/2009-5, CISPR22:1997, CISPR24 44 EuropeanUnionandEFTARegulatoryCompliance DRAFT Including: EN 61000-3-2, -3-3, -4-2, -4-3, -4-4, -4-5, -4-6 and -4-11. The product is also licensed as required for additional country specific standards as required for the International Marketplace. Radio: EN 300-328 v.1.7.1 (2006-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques. Certifications are harmonized to the EN standards covering essential requirements under article 3.2 of the R&TTE Directive. Compliance includes testing with the supplied integral antenna. SAR: EN62209-2:2010 European Community Declaration of Conformity Hereby, Texas Instruments declares that the following products are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. TI-Nspire Navigator Access Point TI-Nspire Navigator Wireless Cradle TI-Nspire CX Wireless Network Adapter TI-Nspire CX Wireless Network Adapter v2 TI-Nspire CX Navigator Access Point English Hereby, Texas Instruments declares that the TI-Nspire Navigator Access Point, TI-Nspire Navigator wireless cradle, and TI-Nspire CX Wireless Network Adapter, TI-Nspire CX Wireless Network Adapter - v2, and TI-Nspire CX Navigator Access Point are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The Declaration of Conformity may be consulted in the Product Stewardship page at education.ti.com. Texas Instruments , TI-Nspire Navigator
, TI-Nspire Navigator TI-Nspire CX , TI-Nspire CX
- v2 TI-Nspire CX Navigator 1999/5/. EuropeanUnionandEFTARegulatoryCompliance 45 DRAFT esk republika Dansk Norsk Suomi education.ti.com. Texas Instruments tmto prohlauje, e TI-Nspire Navigator pstupov bod, bezdrtov stojan TI-Nspire Navigator a TI-Nspire CX bezdrtov sov adaptr, TI-Nspire CX bezdrtov sov adaptr - v2a TI-Nspire CX Navigator pstupov bod jsou v souladu se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Prohlen o shod me bt konzultovn v na strnce Product Stewardship education.ti.com. Texas Instruments erklrer hermed, at TI-Nspire Navigator adgangspunktet, den trdlse TI-Nspire Navigator holder, den TI-Nspire CXNavigator adgangspunktet, den trdlse TI-Nspire CX netvrksadapter og den trdlse TI-Nspire CX netvrksadapter - v2er i overensstemmelse med de essentielle krav og andre relevante bestemmelser i direktiv 1999/5/EF. Du kan lse overensstemmelseserklringen p produktforvaltningssiden p education.ti.com. Texas Instruments erklrer herved at TI-Nspire Navigator tilgangspunkt, TI-Nspire CXNavigator tilgangspunkt, TI-Nspire Navigator trdls bordholder, TI-Nspire CX Wireless Network Adapter og TI-Nspire CX Wireless Network Adapter - v2overholder de vesentlige kravene og andre relevante bestemmelser i direktivet 1999/5/EC. Samsvarserklringen kan leses p siden Produktforvaltning p education.ti.com. Texas Instruments vakuuttaa, ett TI-Nspire Navigator-
liityntpiste, TI-Nspire CXNavigator-liityntpiste, langaton TI-Nspire Navigator-kelkka, TI-Nspire CX Wireless Network Adapter ja TI-Nspire CX Wireless Network Adapter - v2 tyttvt direktiivin 1999/5/EY oleelliset vaatimukset ja ja muut asianmukaiset ehdot. Vaatimustenmukaisuusvakuutus on tarkasteltavissa tuotevastuusivulla osoitteessa education.ti.com. Franais Texas Instruments dclare que le point daccs TI-Nspire 46 EuropeanUnionandEFTARegulatoryCompliance DRAFT Deutsch Italiano Navigator, le point daccs TI-Nspire CX Navigator, le socle de synchronisation TI-Nspire Navigator, ladaptateur de rseau sans fil TI-Nspire CX et ladaptateur de rseau sans fil TI-Nspire CX - v2sont conformes aux exigences essentielles et aux autres clauses applicables de la Directive 1999/5/CE. La Dclaration de conformit peut tre consulte la page Grance du produit education.ti.com. Texas Instruments erklrt hiermit, dass der TI-Nspire Navigator Zugangspunkt, TI-Nspire CXNavigator Zugangspunkt, die drahtlose TI-Nspire Navigator Basisstation, der drahtlose TI-Nspire CX Netzwerkadapter drahtlose und der TI-Nspire CX Netzwerkadapter - v2mit den wesentlichen Anforderungen und anderen relevanten Bestimmungen der Richtlinie 1999/5/EG konform sind. Die Konformittserklrung kann auf der Seite Engagement fr die Umwelt unter education.ti.com angezeigt werden.
, Texas Instruments TI-Nspire Navigator, TI-Nspire TI-Nspire CX , TI-Nspire CX - v2, TI-Nspire CX Navigator 1999/5/. education.ti.com. Con la presente, Texas Instruments dichiara che il punto di accesso TI-Nspire Navigator, il punto di accesso TI-Nspire CXNavigator, la base di ricarica wireless TI-Nspire Navigator, la basetta wireless TI-Nspire CX e la basetta wireless TI-Nspire CX - v2sono conformi ai requisiti fondamentali e ad altri provvedimenti della Direttiva 1999/5/CE. possibile consultare la Dichiarazione di conformit alla pagina Product Stewardship (Gestione responsabile del prodotto), allindirizzo education.ti.com. Nederlands Hierbij verklaart Texas Instruments dat het TI-Nspire EuropeanUnionandEFTARegulatoryCompliance 47 DRAFT Navigator accesspoint, de TI-Nspire CX Navigator accesspoint, de TI-Nspire Navigator draadloze slede, de TI-Nspire CX draadloze netwerkadapter en de TI-Nspire CX draadloze netwerkadapter - v2voldoen aan de essentile vereisten en andere relevante bepalingen van Richtlijn 1999/5/EC. De verklaring van overeenstemming kan worden geraadpleegd op de pagina Product Stewardship (Productbeheer) op education.ti.com. Portugus A Texas Instruments declara, pela presente, que o ponto de Espaol Svenska acesso TI-Nspire Navigator, o ponto de acesso TI-Nspire CXNavigator, a base sem fios TI-Nspire Navigator, o adaptador de rede sem fios TI-Nspire CX e o adaptador de rede sem fios TI-Nspire CX - v2esto em conformidade com os requisitos essenciais e outras disposies relevantes da Directiva 1999/5/CE. A Declarao de Conformidade pode ser consultada na pgina Administrao do Produto em education.ti.com. Mediante el presente documento, Texas Instruments declara que el punto de acceso TI-Nspire Navigator, el punto de acceso TI-Nspire Navigator CX, el soporte inalmbrico TI-Nspire Navigator, el adaptador de red inalmbrica TI-Nspire CX y el el adaptador de red inalmbrica TI-Nspire CX - v2cumplen con los requisitos esenciales y otras disposiciones relevantes de la directiva 1999/5/CE. Puede consultar la declaracin de conformidad en la pgina Administracin de producto en education.ti.com. Texas Instruments deklarerar hrmed att TI-Nspire Navigator anslutningspunkt, TI-Nspire CX Navigator anslutningspunkt, TI-Nspire Navigator trdls tillkopplingsenhet, TI-Nspire CX trdls ntverksadapter och TI-Nspire CX trdls ntverksadapter - v2uppfyller de vsentliga kraven och vriga relevanta bestmmelser enligt direktivet 1999/5/EG. Deklarationen om verensstmmelse kan lsas p sidan Produktansvar p webbplatsen education.ti.com. 48 EuropeanUnionandEFTARegulatoryCompliance DRAFT Slovensko Texas Instruments vyhlasuje, e TI-Nspire Navigator Access Slovenija Point, bezdrtov kolsky TI-Nspire Navigator a TI-Nspire CX bezdrtov sieov adaptr, TI-Nspire CX bezdrtov sieov adaptr - v2a TI-Nspire CX Navigator prstupov bod s v slade so zkladnmi poiadavkami a inmi prslunmi ustanoveniami smernice 1999/5/EC. Vyhlsenie o zhode k nahliadnutiu na strnke produktu sprvcovstvo v education.ti.com. Texas Instruments izjavlja, da TI-Nspire Navigator dostopno toko, TI-Nspire Navigator wireless zibelka in TI-Nspire CX brezino omreno kartico, TI-Nspire CX brezino omreno kartico - v2in TI-Nspire CX Navigator vstopne toke so v skladu z bistvenimi zahtevami in drugimi ustreznimi dolobami Direktive 1999/5/ES. Izjava o skladnosti se lahko posvetuje nadzor izdelkov na strani education.ti.com. Countries of Operation and Restrictions of Use in the European Community OperationUsingthe2.400to2.4835GHzChannelsintheEuropean Community The installer and/or end user should use the configuration utility provided with this product to verify the current channel of operation, the expected transmit power level, and to confirm that the device is operating in conformance with the spectrum usage rules for the selected European Community country. If operation is occurring outside of the allowable channels as indicated in this guide, then operation of the product must cease immediately and the installer must consult with the local technical support staff responsible for the wireless network. These devices are intended to be operated in all countries of the European Community. The frequencies associated with channels 1 to 13 in the 2.400 to 2.4835 GHz band are allowed to be used either indoors or outdoors in all countries of the European Community, except where noted:
In Greece, Italy, Latvia, and Spain, the end-user must apply for a license from the national spectrum authority to operate this device outdoors. EuropeanUnionandEFTARegulatoryCompliance 49 DRAFT Please consult the TI-Nspire Navigator Teacher Software Guidebook for further information regarding restrictions and operating conditions for outdoor configurations. 50 EuropeanUnionandEFTARegulatoryCompliance DRAFT China SRRC CMIIT Identification Product Name TI-Nspire Navigator Wireless Cradle TI-Nspire Navigator Access Point TI-Nspire CX Wireless Network Adapter TI-Nspire CX Navigator Access Point TI-Nspire CX Navigator Wireless Network Adapter v2 CMIIT ID 2010DJ5746 2012DJ1441 2011DJ1546 TBD TBD ChinaSRRCCMIITIdentification 51 DRAFT Warning Statements Warning! Install the TI-Nspire Navigator Access Point or TI-Nspire CX Navigator Access Point in such a manner as to maintain a minimum of 20 cm
(7.9 inches) separation distance between the radiating element(s) and all persons. This safety warning conforms to FCC radio frequency exposure limits. Warning! Do not touch or move the TI-Nspire Navigator Access Point or or TI-Nspire CX Navigator Access Point when the antennas are transmitting or receiving. Warning! The TI-Nspire Navigator Access Point, TI-Nspire Navigator Wireless Cradle, TI-Nspire CX Wireless Network Adapter, TI-Nspire CX Navigator Access Point, and TI-Nspire CX Wireless Network Adapter - v2 are intended for indoor use only. Do not install the device nor operate it outdoors. Warning! Intentional radiators, such as the TI-Nspire Navigator Access Point, TI-Nspire Navigator Wireless Cradle, TI-Nspire CX Wireless Network Adapter. TI-Nspire CX Navigator Access Point, and TI-Nspire CX Wireless Network Adapter - v2are not intended to be operated with any antenna(s) other than those furnished by Texas Instruments. An intentional radiator may only be operated with the antenna(s) with which it is authorized. Warning! The TI-Nspire Navigator Access Point radio(s) and TI-Nspire CX Navigator Access Point radio(s) are disabled by default and can be enabled only by the system administrator using the Management software application. Warning! The radio frequency band, operating channels, and transmit power depend on the country of operation specified by the system administrator during setup and configuration using the Management software. Warning! Only qualified personnel must perform installation. Read and follow all warning notices and instructions marked on the product or included in the documentation 52 WarningStatements DRAFT Important for Safe AC Adapter Operation In addition to the careful attention devoted to quality standards in the manufacture of your TI product, safety is a major factor in the design of every product. However, safety is your responsibility as well. This section lists important information that will help assure your enjoyment and proper use of this TI product and accessory equipment. Please read it carefully before operating and using your product. Installation Read and follow Instructions: You should read all the safety and operating instructions before operating the product. Follow all operating instructions. Retain Instructions: You should save all the safety and operating instructions for future reference. Heed Warnings: Comply with all warnings on the product and in the operating instructions. Use the Recommended AC adapter: You must use the adapter that comes with your product. Check Power Sources: The AC adapter for your TI product must be used with an AC100V-230V 50Hz/60Hz supply outlet. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. Be Careful of Overloading: Do not overload wall outlets or extension cords, as this can result in a risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. Periodically examine the cord, and if its appearance indicates damage or deteriorated insulation, have it replaced by your service technician. Protect Power Cords: Route power supply cords so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords where they are attached to plugs and convenience receptacles, and examine the point where the power cord attaches to the TI product. Check Ventilation: Slots and openings in the enclosure are provided for ventilation to ensure reliable operation of the TI product and to protect it from overheating. Do not block or cover these openings. Never block these openings by placing the TI product on a bed, sofa, rug, or other similar ImportantforSafeACAdapterOperation 53 DRAFT surface. Never place the TI product near or over a radiator or heat register, or any other head source (including amplifiers). Do not place the TI product in a built-in installation, such as a bookcase or equipment rack, unless you provide proper ventilation. Do Not Use Accessories: Do not use attachments, unless they are recommended by TI, as they may cause electrical or fire hazards. Do Not Use Near Water: Do not use the TI product near water; for example, near a bathtub, sink or laundry tub, in a wet basement or near a swimming pool. Do Not Place Near a High Temperature Source: Do not use the TI product near a source of heat such as a kitchen range, a fireplace, or a radiator. Use Caution in Mounting the TI Product: Do not place the TI product on an unstable surface. The TI product may fall, causing serious injury to a child or adult, as well as serious damage to the TI product. Do Not Use Near Medical Equipment: Do not operate the product near equipment that is susceptible to electrical interference, or is used for medical purposes. Do not use the product near a pacemaker or a patient care area in a hospital. Important Information Wait at least 10 seconds between disconnecting and reconnecting the TI product with the AC power adapter. Unplug the product from the wall outlet carefully, as the AC adapter may be hot. Use and Maintenance Unplug Power Before Cleaning: Do not used liquid or aerosol cleaners. Use a damp cloth for cleaning. Keep Objects Out of Openings: Never push objects of any kind into the TI product through openings such as the ventilation holes, as they may touch high voltage circuits and "short out" parts, which could result in a fire or electric shock. Never spill liquid on the TI product. Protect From Lightning: Unplug the TI product during a lightning storm, or when leaving it unattended and unused for a long period. Remove the power adapter from the wall outlet, and disconnect the cable system. This will prevent damage to the TI product due to lightning and power line surges. Take care not to touch the metal portion of the TI product or cables in a lightning storm. 54 ImportantforSafeACAdapterOperation DRAFT Service Refer Servicing to Qualified Service Personnel under the Conditions Listed Below:
-
-
-
-
If the power supply cord or plug is damaged. If liquid has been spilled or objects have fallen into the product. If the product has been exposed to rain or water. If the product does not operate normally as per the operating instructions. If the product has been dropped or the case has been damaged.
-
- When the product exhibits a distinct change in operation, such as the inability to complete its self-check. Require Safety Check: Upon completion of any service or repairs to the product, ask the service technician to perform the recommended safety checks to verify that the product is in a safe operating condition. ImportantforSafeACAdapterOperation 55 DRAFT