all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Manual | Users Manual | 474.45 KiB | ||||
1 2 |
|
Internal photos | Internal Photos | 545.63 KiB | ||||
1 2 |
|
External photos | External Photos | 173.94 KiB | ||||
1 2 |
|
FCC ID label information | ID Label/Location Info | 89.85 KiB | ||||
1 2 | Test Report | |||||||
1 2 |
|
Supplier's Declaration of Conformity | Cover Letter(s) | 124.03 KiB | ||||
1 2 |
|
ATCB request for information | Cover Letter(s) | 16.08 KiB | ||||
1 2 |
|
Operational description | Operational Description | 17.81 KiB | ||||
1 2 |
|
Power of Attorney Letter | Cover Letter(s) | 16.41 KiB | ||||
1 2 |
|
Request for confidentiality | Cover Letter(s) | 14.70 KiB | ||||
1 2 | Test Setup Photos | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report |
1 2 | Manual | Users Manual | 474.45 KiB |
June 4, 2002 To whom it may concern:
TFT, Inc. is a manufacturer of EAS Encoders/Decoders, who now seeks Type Certification of an EAS Decoder (only) under FCC Rule Part 11. On January 31, 1996, TFT, Inc. was granted Type Certification on an Emergency Alert System Encoder/Decoder, FCC Identifier BIOEAS911, File No. 31010/EQU 4-3-4. The Decoder (only) for which TFT now seeks Type Certification is part of the original Certification Application made on November 10, 1995. Several of the Part 11 Compliance Tests for that application are incorporated in this new application for an EAS Decoder (only) device, which does not function as an Encoder as well. In order to accomplish this, TFT has removed several circuits and components from the original Encoder/Decoder in order to disable and defeat its functionality as an EAS Encoder. Because the overall construction of the unit is not materially changed, all Decoder tests conducted for the original application remains at no change and may apply to this application as well. Best regards, Edmund Fong Executive Vice President- TFT Inc. ii EAS 911D Decoder Preliminary Data Sheet Two self-contained receivers Front panel mounted speaker LCD display Password protected Features Decodes and forwards EAS emergency messages RS-232 Output for character generator interface Built-in impact printer Digital audio recorder Automatic or manual operation FCC Type Notification Pending General Until now a decoder-only for broadcast and cable applications of the Federal Communications Commissions (FCC) Emergency Alert System (EAS) has not existed. The EAS 911D is a decoder only, based on the proven performance of the TFT EAS 911 line of EAS Encoder/Decoders, that permits a broadcaster or cable operator to receive and forward EAS messages. These operations may be handled either automatically for unmanned situations or manually with the assistance of an operator. The EAS 911D has many of the features of the EAS 911 Encoder/Decoders, including a built -in impact printer, character generator interfaces, a lighted numeric keypad, practice operation, and many visual indicators. The EAS 911D also features easy set-up and operation with a combination of LCD and lighted key displays that guide an operator or installer through each step. Decoder Section The decoder section of the EAS 911D is programmed in the same fashion as the EAS 911 encoder/decoders. Password protection allows an operator to set up all parameters associated with decoding EAS messages, including setting the current date and time, setting the station time zone, automatic observance of daylight savings time, and the stations FIPS (Federal Information Processing System) code. The decoder can be programmed for automatic forwarding of EAS messages when user-selected criteria of event selection and location are met. The event code and location codes of an incoming EAS message are compared electronically to lists stored in setup of the EAS 911D to decide whether a message should automatically forwarded. If there is a match of both the event field and at least one of the location fields, the message will be automatically forwarded. Also in setting up the EAS 911D several interfaces are available for video character generators. These character generators are available in both analog and digital versions. Some interfaces even permit setting of character generator parameters from the EAS 911D. The user can also select whether text for the Required Weekly Test (RWT) is sent to the character generator or not. In Setup Mode, the EAS 911D can also record a short voice announcement (used for cable television system compliance), set the alert time-out, and enable a one-button method of manually forwarding a message. Receiver Section Built into the EAS 911D are two receiver modules for receiving the two FCC mandated monitoring assignments. These receivers are frequency agile for both AM and FM broadcast and can be configured in any combination if specified at time of order. The frequency for each receiver is set with rotary DIP switches behind an access panel on the front of the unit. All standard broadcast frequencies can be digitally set. Front Panel The EAS 911D front panel is laid out to guide the installer or operator through all the functions necessary to program and operate the unit. In addition to the lighted numeric keypad, the front panel also has other pushbuttons for password, cancel, practice, header send, EOM send, message waiting acknowledgment, manual forwarding, mode switching, and review of both the header and a udio portions of an EAS message. Indicators for receiver signal levels, an alert relay closure, an on-air relay closure, and auto/man functions clearly show status of the decoder at a single glance. A speaker key permits audio monitoring of the two built -in receivers and the digital audio recorder. The speaker key also changes the function of the LCD to a bargraph to provide a visual indication of receiver operation. Rear Panel Connectors for RF inputs to the receivers, speaker/printer inhibit, balanced audio output, on-air relay, message alert relay, and digital ports are located on the rear. A professional 120 VAC/60 Hz power and fuse receptacle are also provided. Note: This device has not been authorized as required by the rules of the Federal Communications Commission. This device is not, and may not be offered for sale or lease, or sold or leased, until authorization is obtained. Contents subject to change without notice. P/N 5004-EAS911D REV. A June 2002 EQUIPMENT SERIAL NO. __________ SHIPMENT DATE _________________ MODEL EAS911D EMERGENCY ALERT SYSTEM EAS DECODER USERS GUIDE TFT, INC. 2243 RINGWOOD AVENUE, SAN JOSE, CA 95131 TEL: (408) 943-9323 Service Department Ext. 300 FAX: (408) 432-9218 ii EAS 911D EAS DECODER The EAS DECODER is a combined Emergency Alert System (EAS) Decoder and Receivers in single unit that permits broadcasters, cablecasters and emergency managers to receive, store, forward Emergency Alert Messages prescribed by the FCC's EAS Rules. By using the EAS digital protocol, the Decoder responds only to the user pre-selected messages and forwards only certain messages automatically with no operator intervention. FEATURES:
MODEL 911D Low Cost, Easy EAS Decoder with AM/FM Receiver in Single Unit Two RS-232 Interfaces Built-in Two-Minute Digital Voice Storage The COM2 port exchanges serial data to and from an external video character generator using an RS-232 interface. Fully Compliant with FCC Part 11, Emergency Alert System Rules Fully Compliant with FCC Part 15 Rules Fully Compatible with NOAA Weather Radio SAME Code Scans 2 Required Audio Inputs Full Features for Unattended Operation. Front Panel Logging Printer Interface for Video Character Generator FCC ID No. BIOEAS911D Protocols for several major suppliers of character generators are supported. ii CONTENTS SECTION I - GENERAL INFORMATION Paragraph Title Page 1.1 INTRODUCTION ........................................................................................................................................................................ 1-1 1.2EQUIPMENT DESCRIPTION ................................................................................................................................................... 1-1 1.3 SPECIFICATIONS................................................................................................................................................................... 1-2 1.4 FCC Designator ............................................................................................................................................................................. 1-3 1.5 Warranty Information ................................................................................................................................................................... 1-3 1.6 Claims for Damage in Shipment ................................................................................................................................................ 1-4 1.7TECHNICAL SUPPORT ............................................................................................................................................................. 1-4 SECTION II - GETTING TO KNOW YOUR EAS DECODER AND RELATED EQUIPMENT 2.1 INTRODUCTION ........................................................................................................................................................................ 2-1 2.2 Unpacking and Inspection ........................................................................................................................................................... 2-1 2.3 THE FRONT PANEL .................................................................................................................................................................. 2-1 2.3.1 Left Section................................................................................................................................................................ 2-1 2.3.2 Right Section ............................................................................................................................................................ 2-3 2.4 THE REAR PANEL ..................................................................................................................................................................... 2-5 2.5 Printer............................................................................................................................................................................................... 2-5 2.6 RELATED Equipment ................................................................................................................................................................. 2-6 2.6.1 TFT EAS Receiver Modules .................................................................................................................................. 2-6 2.6.2 TFT Program/Transmitter Interrupt unit............................................................................................................... 2-6 2.7PRE-INSTALLATION INFORMATION ................................................................................................................................. 2-6 2.7.1 2.7.2 2.7.3 Obtaining a Copy of Operational Area/State Plan ............................................................................................. 2-6 Obtaining Two FCC Assigned Stations to Monitor ........................................................................................... 2-6 Optional/Additional Monitoring ........................................................................................................................... 2-6 2.8INSTALLATION SUMMARY FORM ..................................................................................................................................... 2-6 SECTION III - PRE-INSTALLATION CHECKOUT 3.1 INTRODUCTION ........................................................................................................................................................................ 3-1 3.2PRIMARY POWER APPLICATION ........................................................................................................................................ 3-1 3.3 Not available ................................................................................................................................................................................... 3-1 3.4 TEST WITH ANCILLARY EQUIPMENT ............................................................................................................................. 3-1 3.4.1 Test with EAS Receiver Modules.......................................................................................................................... 3-1 iii CONTENTS (Continued) Paragraph Title Page SECTION III - PRE-INSTALLATION CHECKOUT (Continued) 3.4.2 Test with EAS 940A Program / Transmitter Interrupt Unit ............................................................................. 3-1 3.5 TESTING THE PRINTER........................................................................................................................................................... 3-1 3.6TESTING THE DIGITAL VOICE RECORDER..................................................................................................................... 3-1 3.7TESTING WITH A VIDEO CHARACTER GENERATOR ................................................................................................ 3-2 SECTION IV - PROGRAMMING THE EAS DECODER 4.1 INTRODUCTION ........................................................................................................................................................................ 4-1 4.2 EAS MESSAGE OVERVIEW ................................................................................................................................................... 4-1 4.2.1 4.2.2 4.2.3 The EAS Header ...................................................................................................................................................... 4-2 Two-Tone Attention Signal..................................................................................................................................... 4-2 Getting Started........................................................................................................................................................... 4-2 4.3 SET STATION TIME ZONE...................................................................................................................................................... 4-2 4.4SET CURRENT DATE/TIME..................................................................................................................................................... 4-4 4.5DAYLIGHT SAVING TIME ENABLE .................................................................................................................................... 4-4 4.6NOT AVAILABLE ........................................................................................................................................................................ 4-4 4.7SET STATION FIPS CODE......................................................................................................................................................... 4-5 4.8SET STATION IDENTIFICATION CODE.............................................................................................................................. 4-5 4.9NOT AVAILABLE ........................................................................................................................................................................ 4-5 4.10CHANGE PRIMARY PASSWORD ........................................................................................................................................ 4-6 4.11CHANGE SETUP PASSWORD .............................................................................................................................................. 4-6 4.12RECOVER LOST PASSWORD ............................................................................................................................................... 4-6 4.13SELECT EVENTS TO AUTO FORWARD ........................................................................................................................... 4-6 4.14ADD LOCATIONS TO AUTO FORWARD ......................................................................................................................... 4-7 4.15VERIFY OR DELETE LOCATIONS TO AUTO FORWARD ......................................................................................... 4-7 4.16NOT AVAILABLE ...................................................................................................................................................................... 4-7 4.17NOT AVAILABLE ...................................................................................................................................................................... 4-7 4.18VOICE RECORDER INSTALLED? ........................................................................................................................................ 4-7 4.19NOT AVAILABLE ...................................................................................................................................................................... 4-7 4.20NOT AVAILABLE ...................................................................................................................................................................... 4-7 iv CONTENTS (Continued) Paragraph Title Page SECTION IV - PROGRAMMING THE EAS DECODER (Continued) 4.21ENABLE CHAR GEN INTERFACE ....................................................................................................................................... 4-8 4.22NOT AVAILABLE ...................................................................................................................................................................... 4-9 4.23SET LCD SCREEN CONTRAST ............................................................................................................................................ 4-9 4.24RECORD VOICE ANNOUNCEMENT ................................................................................................................................. 4-9 4.25VERIFY VOICE ANNOUNCEMENT ................................................................................................................................... 4-9 4.26NOT AVAILABLE ...................................................................................................................................................................... 4-9 4.27 NOT AVAILABLE .....4-9 4.28SET ALERT TIMEOUT.............................................................................................................................................................. 4-9 4.29SET ONE-BUTTON MANUAL FORWARD ........................................................................................................................ 4-9 4.30 ENABLE CG TEXT FOR RWT..4-9 4.31 SET AUTO MODE TIMER4-9 4.32 RECORD ALERT VOICE MESSAGE..4-9 4.33 VERIFY ALERT VOICE MESSAGE4-9 SECTION V - INSTALLATION 5.1 INTRODUCTION ........................................................................................................................................................................ 5-1 5.2 AUDIO OUTPUT LEVEL ADJUSTMENT ........................................................................................................................... 5-1 5.3 DECODER AUDIO INPUT LEVEL ADJUSTMENT .......................................................................................................... 5-2 5.4 DIGITAL INTERFACE J103 (RS-232) ................................................................................................................................... 5-2 5.5 DIGITAL INTERFACE J104 (RS-232) ................................................................................................................................... 5-2 5.6THE ON-AIR RELAY .................................................................................................................................................................. 5-2 5.7 THE ALERT RELAY .................................................................................................................................................................. 5-3 5.8 PRINTER/SPEAKER INHIBIT (J109)................................................................................................................................ 5-3 5.9-5.12 NOT AVAILABLE.5-3 5.13 Comm INPUT EXPANDER, FIELD INSTALLATION .................................................................................................... 5-3 5.14FRONT PANEL PRINTER, FIELD INSTALLATION ....................................................................................................... 5-3 v SECTION VI - OPERATION Paragraph Title Page 6.1 INTRODUCTION ..... . 6-1 6.2 FRONT PANEL LEFT SECTION ...........................................................................................................................6-1 6.2.1 Use of the HELP Key and HELP Menu ............................................................................................................... 6-1 6.2.2-5 NOT A VAILABLE.................................................................................................................................................. 6-2 6.2.6 Use of the CANCEL Key....................................................................................................................................... 6-3 6.2.7 6.2.8 Use of the PRACTICE Key for Off-Air Testing and Training......................................................................... 6-3 The EAN/EAT Operations...................................................................................................................................... 6-3 6.3 LCD SCREEN, PRINTER, SPEAKER AND CONTROL KEYS ....................................................................................... 6-3 6.3.1 6.3.2 6.3.3 6.3.4 6.3.5 General Discussion .................................................................................................................................................. 6-3 Use of the Up (D Use of the EXIT Key ............................................................................................................................................... 6-3
) Arrow Keys ................................................................................................... 6-3
) and Down ( Speaker Volume Adjustment ................................................................................................................................. 6-3 Print Message from the LCD Screen .................................................................................................................... 6-3 6.4 FRONT PANEL RIGHT SECTION .................................................................... 6-4 6.4.1 LED Indicators ......................................................................................................................................................... 6-4 6.4.2 Manual and Auto Forward Mode Selection ........................................................................................................ 6-4 6.4.3 6.4.4 Reviewing Previous EAS Messages ..................................................................................................................... 6-5 Acknowledging the Last EAS Message and Resetting the Alert Relay ......................................................... 6-5 6.4.5 Manually Forwarding an EAS Message After Review...................................................................................... 6-5 6.4.6 Message Priority6-5 6.5 FUNCTIONS AVAILABLE FROM THE OPERATION MENU ...................................................................................... 6-6 6.5.1 6.5.2 6.5.3 6.5.4 6.5.5 6.5.6 6.5.7 The Operation Menu ................................................................................................................................................ 6-6 Review Received Messages .................................................................................................................................... 6-6 Review Transmitted Messages ............................................................................................................................... 6-6 Test On-Air Relay..................................................................................................................................................... 6-6 Test Alert Relay ........................................................................................................................................................ 6-6 Set Output Level: On-Air Relay Open.................................................................................................................. 6-6 Set Output Level: On-Air Relay Closed............................................................................................................... 6-6 6.5.8 Set Printer Operation..6-6 Set Message Hold..6-7 6.5.9 vi SECTION VII NOT AVAILABLE FOR MODEL 911D SECTION VIII - AM/FM RECEIVER Paragraph Title Page 8.1 SPECIFICATIONS .................................................................................................................................................................. 8-1 8.2 AM RECEIVER MODULE BLOCK DIAGRAM DESCRIPTION .............................................................................. 8-1 8.3 8.4 8.5 FM RECEIVER MODULE BLOCK DIAGRAM DES CRIPTION................................................................................ 8-3 REAR PANEL CONTROLS AND CONNECTORS ........................................................................................................ 8-5 FM RADIO ANTENNA INSTALLATION........................................................................................................................ 8-5 8.6 AM ANTENNA INSTA LLATION ...................................................................................................................................... 8-5 8.7 RECEIVED SIGNAL STRENGTH INDICATION (RSSI) ............................................................................................. 8-5 SECTION XI - THEORY OF OPERATION 9.1 9.2 THE EAS INFORMATION SUPER HIGHWAY............................................................................................................. 9-1 THE EAS DECODER: AN OVERVIEW ........................................................................................................................... 9-1 9.3 A CLOSER LOOK: SYSTEM BLOCK DIAGRAM ....................................................................................................... 9-2 9.4 MAIN BOARD ........................................................................................................................................................................ 9-2 9.4.1 9.4.2 9.4.3 Audio Loop Through and Switching..................................................................................................................... 9-3 Digital Signal Processor/CPU................................................................................................................................. 9-3 Input/Output Control................................................................................................................................................ 9-3 LEFT SECTION KEYPAD.................................................................................................................................................... 9-3 RIGHT SECTION KEYPAD................................................................................................................................................ 9-3 LIQUID CRYSTAL (LCD) DISPLAY ............................................................................................................................... 9-3 9.5 9.6 9.7 9.8 DIGITAL VOICE RECORDER ........................................................................................................................................... 9-3 9.9 PRINTER .................................................................................................................................................................................. 9-3 9.10 COM EXPANDER .................................................................................................................................................................. 9-3 vii Paragraph Title Page SECTION X - MAINTENANCE AND REPAIR 10.1 INTRODUCTION .................................................................................................................................................................... 10-1 10.2 TOOL AND TEST EQUIPMENT REQUIREMENTS ..................................................................................................... 10-1 10.3 ROUTINE MAINTENANCE ................................................................................................................................................ 10-1 10.3.1 Calibration................................................................................................................................................................ 10-1 10.3.2 Audio Levels .......................................................................................................................................................... 10-1 10.3.2.1 Audio Output Level Adjustment.......................................................................................................................... 10-1 10.3.2.2 Decoder Audio Input Level Adjustment ............................................................................................................ 10-1 10.3.3 Lithium Battery Replacement ............................................................................................................................. 10-2 10.4 PRINTER ...............................................................................................................................................................................10-2 10.4.1 Operator Information ............................................................................................................................................ 10-2 10.4.2 Paper Roll Replacement ....................................................................................................................................... 10-3 10.4.3 Ribbon Cartridge Replacement............................................................................................................................................ 10-4 10.4.4 Printer Supply Ordering Information.................................................................................................................................. 10-4 10.5 DIAGNOSTICS AND REPAIR ............................................................................................................................................ 10-5 10.6 TROUBLESHOOTING .......................................................................................................................................................... 10-6 10.7 TFT CUSTOMER SERVICE DEPARTMENT .................................................................................................................. 10-6 APPENDICES APPENDIX A - ENGINEERING DRAWINGS APPENDIX B - PARTS LISTS APPENDIX C - FIPS CODE LISTINGS APPENDIX D - MENU LISTINGS APPENDIX E - VIDEO CHARACTER GENERATOR INTERFACE APPENDIX F - ORIGINATOR AND EVENT CODE TRANSLATIONS APPENDIX G - GLOSSARY OF EAS DECODER TERMS viii SECTION I GENERAL INFORMATION INTRODUCTION 1.1 This EAS DECODER Users Guide is arranged in TEN sections, as follows:
Section I: General Information A general description of the EAS DECODER, its specifications, general information on the FCC designator, warranty and damage claim procedures, and technical support information. Section II Getting To Know Your EAS DECODER and Related Equipment Overview of the various system components of the EAS DECODER and related equipment. Control and Indicator functions, basic component functions, and their interconnection. Section III: Pre-Installation Checkout Some basic test methodology on the EAS DECODER and its related equipment. The user should find it useful to perform the tests in this section with all the EAS DECODER equipment on a lab bench. Section IV: Programming The EAS DECODER Detailed description of setup procedures of various EAS DECODER system parameters, e.g. system date and time, station FIPS codes, Auto Forward events and locations selection. Section V: Installation Instruction for installing and adjusting various system components of the EAS DECODER. Section VI: Operation Describes operational details of the system, including procedures to decode an EAS message. Section VI: Not Used This section has been intentionally deleted. Section VIII: AM/FM Receiver Detailed description of the AM/FM receiver modules parameters, e.g. specifications, block diagrams, front and rear panels control and indicators, as well as antenna installations. Section XI: Theory of operation A general description of the EAS Information Super Highway network, overview of the EAS DECODER and brief Circuit description of each module. Section X: Maintenance and Repair Describes routine maintenance procedures and tools and equipment requirements. 1.2 EQUIPMENT DESCRIPTION The EAS DECODER is a combined Emergency Alert System (EAS) Decoder and Receivers that enables broadcasters and cablecasters to receive, store, forward Emergency Alert Messages as required by the FCCs EAS Rules. By using the EAS digital protocol prescribed by the FCC, the EAS DECODER can function as a sentinel to alert operators to the receipt of emergency messages. Forwarding of only certain messages with a minimum of operator intervention can be achieved selectively, simply, and automatically. Although the EAS DECODER stores all received messages, it only forwards and interrupts programming for those messages that meet broadcasters or cablecasters specific instructions. These instructions, protected by two levels of security, relieve the operator of needing to make crucial decisions at critical times. Emergency messages can then travel quickly and efficiently through the Emergency Alert System. 1-1 The EAS DECODER has two operating modes: automatic and manual. In automatic mo de, only those messages which meet specific criteria are forwarded to the transmitter. With the exception of the required national level events, only messages tagged by management are allowed to interrupt programming. For minimal or unattended operation, the EAS DECODER can perform all the critical emergency alert functions in automatic mode with the voice recorder without operator assistance. For manual mode, no messages are forwarded, except for required national level messages, unless sent by an operator. All incoming messages are recorded, and their header information is stored and available for review or subsequent manual forwarding. An digital voice message recording unit makes an incoming audio message of up to two minutes always available for the operators immediate review. The operator can then decide whether to forward the last message received after review of the complete header and voice announcement. With the EAS DECODER voice recorder it is not necessary for the operator to transcribe or remember text. An LCD display gives the operator instant access to the last ten messages either received or sent. The digital voice message recorder allows automatic forwarding. Two audio inputs and one RS-232 data input are standard on the EAS DECODER to connect to receivers for the two required monitoring assignments of the new EAS. A single audio output connects to external audio switching and distribution systems or to a TFT transmitter/program interrupt unit. This interrupt unit provides four balanced, isolated input and output channels that are switched to a combined common signal during an emergency message transmission. The common audio output provided by the EAS DECODER contains all the header, Attention Signal and EOM codes in proper EAS format for emergency alerting. 1.3 SPECIFICATIONS The EAS DECODER performance and physical specifications are listed in Table 1.3-1. Table 1.3-1. EAS DECODER Specifications Front Panel Protocol FCC EAS codes, 520.83 bits per second. 2083.3 Hz mark and 1562.5 Hz space frequency, ASCII 8 bit characters. Attention Signal 853 and 960 Hz +5 Hz. User programmable duration PASSWORD Key Enables 3-digit password entry for operator level. Additional 3-digit Password required for program changes. CANCEL Key Interrupts operation in progress and returns system to Banner mode. HELP Key Prints out operational help and program menus. PRACTICE Key ... Allows closed-loop test for training and unit performance verification. SEND HEADER Key Activates transmit relay and sends pre-constructed header message SEND EOM Key Activates transmit relay and sends End Of Message code LOCATION(S) Keys 14 key for user-assigned locations ON-AIR RELAY LED . Indicates that the On-Air relay is closed REVIEW Key ..................... Allows review of last message received LED Indicators Three yellow LEDs to indicate incoming EAS channel, two analog and one digital. Two yellow LEDs to indicate AUTO or MANNUAL mode of operation and one red LED to show status of the Alert relay 1-2 SPEAKER Key Turns speaker ON and OFF; monitors inputs PRINT Key ...Commands the front panel printer to print the item shown on the LCD Screen ENTER, EXIT, UP
& DOWN Keys .... Assist initial setup and programming of the equipment REAR PANEL Audio Inputs .Two audio inputs from receivers. Balanced or unbalanced, 10 k-ohms, 0.35 Vp-p to 2 Vp -p, expandable to 6 channels. Data Channels .RS-232, 1200 baud ASCII, one for input, and one for output Audio Output -10 to +10 dBm, 600-ohm balanced, XLR connector On-Air Relay .Relay contact closure, energized when a selected message is decoded for automatic forwarding or when the Encoder is activated Message/Alert RelayRelay contact closure, energized when an EAS message is decoded Printer/Speaker Inhibit ............................. Connects to external switch or relay contacts. Normal operation on contact open. Printing and Speaker operation inhibited (muted) on contact closure COM2........................COM Port Expander MECHANICAL AND ENVIRONMENTAL Input Power.................................................................................................................... 117 VAC 10%, 60Hz, 50 watts maximum. Operating Temperature 0 C to 50 C Size .......................................................................................................................................................................5.25" H x19" W x10" D Net Weight............................................................................................................................................................. Approximately 14 lbs Shipping Weight ................................................................................................................................................. Approximately 16 lbs. 1.4 FCC DESIGNATOR The EAS DECODER Emergency Alert System Decoder is Type-Certified under FCC Part 15, and Type-Certified under Part 11. The FCC designator is BIOEAS911D. 1.5 WARRANTY INFORMATION The following warranty policy and limitations are applicable to the Model 911D EAS DECODER. TFT, Inc. warrants each manufactured Model 911D EAS DECODER to meet published specifications and to be free from defects in material and workmanship. TFT will repair or replace, at its expense, for a period of one (1) year from the date of shipment of equipment, all parts which are defective from faulty material or workmanship. This Warranty does not cover equipment which has been misused and/or altered by the user. Units found to be defective during the warranty period shall be returned to TFT with transportation charges prepaid by the BUYER. It is expressly agreed that replacement and repair shall be the sole remedy of the SELLER with respect to any non-conforming equipment and parts thereof, and shall be in lieu of any other remedy available by applicable law. All returns to the factory must be authorized in advance by TFT. Upon examination by the factory, if any Model 911D EAS DECODER Equipment is found to be defective, the unit will be repaired and returned to the BUYER with transportation charges prepaid by TFT during the warranty period. Transportation charges for the Model 911D EAS DECODER units found to be defective within the first 30 days of the warranty period will be paid both ways by TFT. Transportation charges for warranty returns wherein failure is found not to be the fault of 1-3 TFT or one year after the delivery of the equipment shall be paid both ways by the BUYER. This warranty does not apply to equipment which, in the opinion of the SELLER, has been altered or misused. 1.5 WARRANTY INFORMATION (Continued) NO OTHER WARRANTY IS EXPRESSED OR IMPLIED. TFT IS NOT LIABLE FOR ANY CONSEQUENTIAL DAMAGES. 1.6 CLAIMS FOR DAMAGE IN SHIPMENT Your instrument should be inspected and tested by the method given in Section II of this manual as soon as it is received. If the instrument is damaged in any way or fails to operate properly due to transportation damage, file a claim with the carrier or, if insured separately, with the insurance company. 1.7 OUR CUSTOMER SERVICE FOR EAS PRODUCTS IS AVAILABLE FROM 8:00AM TO 5:00PM PACIFIC TIME MONDAY THROUGH FRIDAY. PLEASE CONTACT US IF YOU NEED ASSISTANCE TECHNICAL SUPPORT TFT, Inc. 2243 Ringwood Avenue San Jose, CA 95131 Tel: (408) 943-9323 Ext. 300 Fax: (408) 432-9218 1-4 SECTION II GETTING TO KNOW YOUR EAS DECODER AND RELATED EQUIPMENT INTRODUCTION 2.1 This section provides an overview description of the EAS DECODER equipment including Front Panel controls and indicators, Rear Panel connectors, options and other related peripheral equipment. 2.2 UNPACKING & INSPECTION Upon receiving the equipment, inspect its shipping container and contents for shipping damage. Keep all packing material until equipment performance is confirmed. If any of the equipment is damaged or fails to operate properly due to transportation damage, file a claim with the transportation company or, if insured separately, with the insurance company. The following items should come with the equipment. Please notify TFT if any items are missing. Description Model 911D Users Guide Power Cord Warranty Notice 2-PIN Female Terminal Block Connector 3-PIN Female Terminal Block Connector 6-PIN Female Terminal Block Connector AM Loop Antenna Rack Mount Screws Rack Mount Washers Part No 5004-911D 1950-7742 3002-0002 1700-1203 1700-1205 1700-5007 2140-7215 2110-0013 2115-0001 Qty 1 1 1 4 2 1 1 4 4 2.3 THE FRONT PANEL The EAS DECODER Front Panel is a collection of input switches and output LEDs, LCD screen, and Printer. Functionally they are grouped into two categories as illustrated in Figure 2.3.1 and 2.3.2 and described in paragraphs 2.3.1 and 2.3.2. 2.3.1 Left Section The left section includes all the command keys as well as the 10 numeric keys. Detailed description on the usage and operation of the keys can be found in this Section. 2-1 Figure 2.3-1. Decoder Front Panel Left Section Controls and Indicators Table 2.3-1. Decoder Front Panel Left Section Controls and Indicators ITEM TITLE 1 LEFT SECTION 2 3 4 5 PASSWORD CANCEL THIS THIS THIS THIS HELP PRACTICE ON-AIR RELAY SEND HDR
(Send Header) SEND EOM Not used 1 to 0 Numeric Keys LCD Screen Speaker FUNCTION Note:
All EAS DECODER switches are momentary action pushbutton type, and are referred to as keys. All keys have built-in yellow LED illuminators. Some keys are electronically aided to function as toggles or latches. A group of keys and indicators used for control of left section of the EAS DECODER. Key. Used to access the Operational Mode and the Setup Menu. Key. May be used to clear inputs or return to a previous entry mode. During manually forwarded messages, pressing CANCEL deactivates the ON-AIR relay and aborts message transmission. Key. Provides access to help menus in Ready, Operation and Setup modes. Key. Prevents the ON-AIR relay from being activated so that message decoding operations may be practiced without on-air program interruption. LED Indicator. illuminated whenever the ON-AIR relay is activated. Key. When flashing, activates the ON-AIR relay and sends the programmed or repeated EAS header information. Key. When flashing, SEND EOM activates the ON-AIR relay and sends the EAS End Of Message code. Used for setup, programming and entering passwords 16-character by 1-line LCD display screen. Displays date, time, header, setup, and help information. Speaker. Outputs the inputs and Header, Message, and End of Message
(EOM) audio and CH1, CH2 Receivers output 2-2 2.3.2 Right Section The right section of the front panel includes the command keys/LEDs, the LCD Display Screen and the Printer. Detailed descriptions of the usage and operation of the keys are contained in Table 2.3-2. Figure 2.3-2. Decoder Controls and Indicators ITEM TITLE FUNCTION Table 2.3-2. Decoder Controls and Indicators 1 2 LCD ENTER EXIT PRINT 16-character by 1-line LCD display screen. Displays date, time, header, setup, and help information. Displayed data scrolls right to left to accommodate messages longer than 16 characters. A group of six keys with functions as marked Selects menu items displayed on the LCD screen, and is used in Encoder and Decoder operations. Exits the current menu and returns to the previous menu or Ready mode. If pressed while in Banner Mode (Time/Date Display), displays software version. If pressed and held for several seconds, causes the software to execute a POWER UP RESET sequence. Causes the item displayed on the LCD Screen to print out on the optional front panel printer. Arrow or Increment/Decrement keys. The Increment key (D ) scrolls upward through menus, or when the SPEAKER key is pressed, increases the speaker volume. The decrement key ( SPEAKER key is pressed, decreases the speaker volume.
) scrolls downward through menus, or when the 2-3 D
SPKR Printer When pressed, activates the speaker on Channel 1. Each time the key is pressed, it advances the speaker to the next channel. Optional 24-column printer. Produces hard copy of EAS messages and Program and Help menus. AM RECEIVER Receiver module for AM broadcast band (540 - 1720 kHz) 3 4 RF & AUDIO TP1 1 MHz, 100 kHz, 10 kHz DX/LO 5 FM RECEIVER RF & AUDIO TP1 1 MHz, 100 kHz, 10 kHz DX/LO 6 MSG WAITING MODE MANUAL FWD CH 1, 2, 3, 4, D ALERT RELAY MAN , AUTO Figure 2-2. AM Receiver Module Edge-Mounted Controls and Indicators Yellow LED. Flashes when an RF signal is detected which is above the minimum level of 20 V and has audio modulation. Test point for RF Signal Strength Indication (RSSI) monitoring Rotary switches for setting receive frequency Local/Distant switch for setting receiver sensitivity Receiver module for FM broadcast band (88 - 108 MHz) Figure 2-3. FM Receiver Module Edge-Mounted Controls and Indicators Yellow LED. Flashes when an RF signal is detected which is above the minimum level of 10 V and has audio modulation. Test point for RF Signal Strength Indication (RSSI) monitoring Rotary switches for setting received frequency Local/Distant switch for setting receiver sensitivity A group of four keys and six LEDs which function as marked:
Key. This key begins flashing when a valid EAS message has been received. The message will scroll on the LCD Screen and remote electronic signs. Key. Each time key is pressed, the EAS DECODER operating mode toggles between Manual and Auto. (with password protection) Pressing this key in conjunction with the PASSWORD key, forwards the last EAS messages received when in Ready mode. A group of five LED indicators. Channel 1 to 4 audio activity LEDs turn on if the channel input level exceeds -10 dBm. The D LED indicates receipt of data on the RS-232 channels. LED indicator. Lights, and the rear panel Alert Relay contacts close when a valid EAS message is received. Two LED indicators which light to show the current operating mode
(Manual or Automatic). When the AUTO LED is lit, the unit will automatically forward messages for events and locations specified in the Setup Menu. 2-4 2.4 THE REAR PANEL The EAS DECODER Rear Panel has Input/Output connectors for EAS related equipment. Figure 2.3-3 shows the Rear Panel Configuration. Figure 2.3-3. Rear Panel Connectors Table 2.3-3. Rear Panel Connectors ITEM TITLE FUNCTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 J101 AUDIO OUTPUT J102 CH 1, 2 AUDIO INPUT COM 2 RS-232 120VAC/60 Hz FUSE: 2A J107 MSG/ALERT RELAY ON-AIR RELAY J104 RS-232 J103 RS-232 J109 PRINTER/SPEAKER INHIBIT RF INPUT RECEIVER 2 RF INPUT RECEIVER 1 AUDIO OUT ADJ RECEIVER 1 AUDIO OUT RECEIVER 1 AUDIO OUT ADJ RECEIVER 2 AUDIO OUT RECEIVER 2 XLR connector. Provides balanced audio output for transmission of EAS messages. 6-pin connector on the Audio Input. Provides two balanced inputs for audio from EAS sources. 9-pin D-connector on the COM Port Expander Board. Provides an RS-232 port for use as a character generator interface. Recessed IEC connector with built-in fuse holder for a standard U.S. 120 VAC, 60 Hz line cord. 2-wire relay contact. Relay is normally open. Relay contacts close when a valid EAS message header is decoded. 2-wire relay contact. Relay is normally open. Relay contacts close when an EAS message is transmitted. 9-pin D-connector. Provides a bi-directional RS-232 port for data output at 1200 baud. 9-pin D-connector. Provides a bi-directional RS-232 port for data input at 1200 baud. 2-pin connector. Provided to inhibit the printer and mute the speaker. Type F connector for RF input to FM receiver 2-pin connector for RF input to AM receiver Audio output level adjustment pot for Receiver 1 Audio output connector for Receiver 1 Audio output level adjustment pot for Receiver 2 Audio output connector for Receiver 2 2-5 Printer 2.5 A 24-column printer is provided to record EAS messages received and transmitted. In addition, it is useful for printing HELP menus. 2.6 RELATED EQUIPMENT The EAS DECODER can accommodate various external equipment to comprise a complete Emergency Alert System. Some of this equipment is described in the following paragraphs. 2.6.1 TFT EAS 930A Multi-Module Receiver The TFT Model 930 Receiver System is a separate, 1-3/4" rack-mount chassis. It can accommodate up to four different plug-in receiver types:
AM FM NOAA Weather Radio
(Spare) PRE-INSTALLATION INFORMATION These receivers can be used as sources for the EAS DECODER audio inputs. This allows a user to plug up to four different receivers into the chassis, then connect them to the EAS DECODER. There is one output per receiver. A separate data sheet is available for the TFT EAS 930 receiver. 2.6.2 TFT EAS 940A Program/Transmitter Interrupt Unit The TFT Model EAS 940 Program transmitter Interrupt unit interrupts a station's audio program to insert an EAS Header and voice message. Normal program audio is resumed at the conclusion of the message. The EAS 940 has four program inputs, an EAS audio input and four program outputs. During an EAS alert, the EAS audio is routed to all four program outputs. It uses internal audio relays, and it connects to ON-AIR relay contacts J106 and audio output J4 on the EAS DECODER rear panel. The EAS 940 can be located up to 2,000 feet from the EAS DECODER. 2.7 Before installing your TFT EAS DECODER, you should be familiar with the requirements of Part 11 of the FCC rules. The TFT EAS Handbook includes a complete set of these rules along with helpful diagrams. 2.7.1 Obtaining A Copy of the Operational Area/State Plan The TFT EAS DECODER is very flexible and can be adapted to your Operational Area/State Plan. To obtain a copy of the plan, contact your States Emergency Coordinator or the broadcast representative for your operational area. Names of State and local contacts are available from the FCC EAS office in Washington, D.C. 2.7.2 Obtaining Two FCC-Assigned Stations to Monitor The EAS requires monitoring two stations in your area. These stations are listed in the operational Area/State Plan and in the FCC Mapbook, which is also available from the FCC EAS office in Washington, D.C. In most, but not all cases, the FCC assigned stations will be AM or FM broadcast stations. 2.7.3 Optional/Additional Monitoring In addition to the FCC assigned stations it may be desirable to monitor other sources and originators of emergency information who may transmit EAS protocol messages, such as NOAA Weather Radio and local government authorities. 2.8 Completing the information on the following work sheets before programming the EAS DECODER will greatly reduce the time required to program the Decoder during the initial setup. INSTALLATION SUMMARY FORM 2-6 INSTALLATION SUMMARY SHEET ________
(Station) ________
(Station) ________
(Station) ________
(Station) 2.8.1 FCC Monitoring Assignment, CH 1 2.8.2 FCC Monitoring Assignment, CH 2 2.8.3 FCC Monitoring Assignment, CH 3 2.8.4 FCC Monitoring Assignment, CH 4 2.8.5 Not applicable 2.8.6 My Station's FIPS Code: __ __ __ __ __ 2.8.7 My Station's ID: __ __ __ __ __ __ __ __ 2.8.8 Time Zone of my station ____________ _______________________ Hours to UTC - GMT Zone 2.8.9 Not applicable ____________
(Frequency) ____________
(Frequency) ____________
(Frequency) ____________
(Frequency) 2.8.10 Events to Auto Forward:
(Event) _________________________ _________________________ _________________________
(Event)
(Event) 2.8.11 Not applicable 2.8.12 Locations to Auto Forward:
(Event) _________________________ _________________________ _________________________
(Event)
(Event) __________________________________________________ _______________
(Name)
(FIPS) __________________________________________________ _______________
(Name)
(FIPS) __________________________________________________ _______________
(Name)
(FIPS) __________________________________________________ _______________
(Your State)
(0SS000) __________________________________________________ USA 000000 _______________ 2-7 SECTION III PRE-INSTALLATION CHECKOUT INTRODUCTION 3.1 This section describes a functional bench test to be performed before installing and programming the EAS DECODER according to the procedures given in Section IV. By completing the pre-installation checkout, the user can be certain that the equipment is operating properly. 3.2 PRIMARY POWER APPLICATION When power is applied to the EAS DECODER, the front panel LEDs may blink momentarily, the LEDs will extinguish, and the Liquid Crystal Display (LCD) Screen will show the date and time. The EAS DECODER will be in the Ready Mode, monitoring the audio inputs for incoming EAS messages. 3.3 Not Available 3.4 TEST WITH ANCILLARY EQUIPMENT 3.4.1 Test with EAS Decoder Receiver Module Connect the Audio Output of the EAS DECODER Receiver to the EAS DECODER Channel 1 Audio Input at J102 of the EAS DECODER Rear Panel. Press the SPKR key and listen to the EAS DECODER broadcast Audio Output through the EAS DECODER speaker. At this time it may be convenient to set the audio input levels to the EAS DECODER Receiver. Use an oscilloscope or audio voltmeter to set the input voltages to approximately 1.5 Volt peak-to- peak. 3.4.2 Test with EAS 940A Program/Transmitter Interrupt Unit Refer to the instructions for the EAS 940 Program/Transmitter Interrupt Unit. 3.5 TESTING THE PRINTER The printer can be tested by pressing the PRINT key on the EAS DECODER front panel. The 24-column printer will print out the text displayed on the LCD. 3.6 TESTING THE DIGITAL VOICE RECORDER Enter the primary and setup passwords by pressing the following Front Panel keys: PASSWORD, 9, 1, 1, PASSWORD, 9, 1, 2. Press the Arrow keys until the LCD Screen displays "21 RECORD". Press ENTER twice to start the Digital Voice Recorder recording. Press EXIT after recording is completed. The Digital Voice Recorder immediately plays back the announcement that was just recorded. Press EXIT to exit. 3.7 TESTING WITH A VIDEO CHARACTER GENERATOR Refer to the Character Generator operation manual. 3-1 SECTION IV PROGRAMMING THE EAS DECODER INTRODUCTION 4.1 The EAS DECODER can be programmed to customize its configuration and to automate its operation. EAS DECODER programming techniques are described in this section. 4.2 A four-part message is used to activate the Emergency Alert System:
EAS MESSAGE OVERVIEW 1. Preamble and EAS Header Codes 2. Two-tone audio Attention Signal*
3. Voice or text message*
4. Preamble and EAS End Of Message (EOM) Codes.
* Not used in the required weekly tests. The message is shown pictorially in Figure 4.2-1. THIS THIS THIS THIS THIS THIS THIS THI Figure 4.2-1 EAS Message Timing Diagram 4-1 The Preamble and EAS Header Codes are transmitted using Frequency Shift Keying (FSK) at a rate of 520.83 bits per second. Mark frequency is 2083.3 Hz, and Space frequency is 1562.5 Hz. Mark and Space times are 1.92 milliseconds. Characters are ASCII 7-bit as defined in ANSI X3.4-1977. The Attention Signal is transmitted after the EAS header codes and is made up of two simultaneously transmitted tones. The fundamental frequencies of these tones are 853 and 960 Hz. 4.2.1 The EAS Header The EAS header consists of seven segments:
Preamble Sync Code Originator ID*
Event Code*
Location code (including county subdivision code)*
Event Duration Time Stamp *
* Requires user programming before installation. Station ID*
Two-Tone Attention Signal Details of these codes are described in the FCC Rules and Regulations Part 11 Section 11.3/EAS Protocol and in Appendix C of this guide. The following paragraphs provide a user guide for setting the programmable segments of the EAS Header. 4.2.2 The two-tone attention signal is the same as the old EBS: 853 Hz and 960 Hz tones. It is used only in the required monthly tests and activation of the EAS. It is not used in the required weekly test. The duration of the two-tone signal is factory programmed at 8 seconds, however its duration is user programmable up to 25 seconds. See Section 4.9 for details. 4.2.3 Getting Started Programming the EAS DECODER requires entry of a Primary Password and a Setup Password to allow access to the Setup Menu. The default passwords are 911 and 912, respectively. See Section 4.10 and 4.11 for information on changing the default passwords. Proceed as follows:
1. Enter the Primary password by pressing PASSWORD and entering 911, the 3-digit password, using the 0-9 numeric keys under LOCATION(S). 2. Press PASSWORD and enter 912, the Setup password. The LCD Screen will display SETUP MENU briefly. Once the correct passwords have been entered, the LCD Screen will display SETUP MENU briefly then display the first menu item: 1. SET CURRENT DATE/TIME Use the Arrow keys (D When a desired menu item is displayed, press ENTER to select it.
) to scroll through the Setup Menu items. The Setup Menu items are listed in Table 4.3-1. SET STATION TIME ZONE 4.3 This command permits setting the number of hours that must be added to local Standard Time to reach Universal Coordinated Time (UTC), also known as Greenwich Mean Time (GMT). Proceed as follows:
1. Use the Arrow keys to change to menu item 2. 2. Press the ENTER key while 2. SET STATION TIME ZONE is displayed on the LCD Screen. The Arrow keys can be used to adjust the offset from -12 to +12 hours. 3. Press ENTER to accept the correct displayed UTC offset. 4-2 Table 4.3-1. Setup Menu Items Menu Item 1. SET CURRENT DATE/TIME 2. SET STATION TIME ZONE 3. DAYLIGHT SAVING?
4. NOT AVAILABLE 5. SET STATION FIPS CODE 6. SET STATION IDENTIFICATION CODE 7. NOT AVAILABLE 8. CHANGE PRIMARY PASSWORD 9. CHANGE SETUP PASSWORD 10. SELECT EVENTS TO AUTO FORWARD 11. ADD LOCATIONS TO AUTO FORWARD 12. VERIFY OR DELETE LOCATIONS TO AUTO FORWARD 13. NOT AVAILABLE 14. NOT AVAILABLE 15. NOT AVAILABLE 16. VOICE RECORDER INSTALLED?
17. NOT AVAILABLE 18. ENABLE CHAR GEN INTERFACE 19. NOT AVAILABLE 20. SET LCD CONTRAST 21. RECORD VOICE ANNOUNCEMENT 22. VERIFY VOICE ANNOUNCEMENT 23. NOT AVAILABLE 24. NOT AVAILABLE 25. SET ALERT TIMEOUT 26. SET ONE-BUTTON MANUAL FORWARD 27. ENABLE CG TEXT FOR RWT 28. SET AUTO MODE TIMER 29. NOT AVAILABLE 30. NOT AVAILABLE 31. NOT AVAILABLE 32. NOT AVAILABLE Refer to Manual Section 4.4 4.3 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.13 4.14 4.15 4.15 4.16 4.17 4.18 4.19 4.20 4.21 4.22 4.23 4.24 4.25 4.26 4.27 4.28 4.29 4.30 4.31 4.32 4.32 4.32 4-3 UTC offsets for the U.S. are listed in Table 4.3-2. Table 4.3-2. UTC Offsets for the U.S. TIME ZONE UTC OFFSET Eastern Standard Time Central Standard Time Mountain Standard Time Pacific Standard Time Alaskan Standard Time Hawaiian Standard Time
+ 05 Hours
+ 06 Hours
+ 07 Hours
+ 08 Hours
+ 09 Hours
+ 10 Hours The UTC offset is always calculated with respect to standard time, not daylight saving time. Note 4.4 SET CURRENT DATE/TIME This menu sets the current date and local time. Press the ENTER key while 1. SET CURRENT DATE/TIME is displayed on the LCD Screen. The LCD Screen will display the current date and time in 24-hour format. EXAMPLE:
JAN 01 95 18:00 JAN will flash, indicating that it may be changed using the Arrow (D After finding the correct month with the Arrow keys, press ENTER to accept the displayed month. The Day, Year, Hour and Minute are set in the same manner. Clock seconds are not shown, but are zeroed when ENTER is pressed for selecting the desired minute. 4.5 DAYLIGHT SAVING TIME ENABLE Daylight saving time starts at 2 a.m. standard time on the first Sunday in April and ends on the last Sunday in October at 2 a.m. daylight time. The EAS DECODER automatically adjusts the local time for daylight saving time if enabled. Proceed as follows:
) keys. 1. Press the ENTER key while 3. DAYLIGHT SAVING? is displayed on the LCD Screen. The LCD Screen will then display DST: ENABLE or DST: DISABLE. 2. When the desired condition is displayed on the LCD Screen, press ENTER to accept it. EXAMPLE:
DST: ENABLE appears on the LCD Screen. If necessary, press Arrow key D or to toggle to DST: DISABLE. When the desired condition is displayed on the LCD Screen, press ENTER to accept it. Recommended: Set for daylight saving time ENABLE. 4.6 NOT AVAILABLE 4.7 SET STATION FIPS CODE The Federal Information Processing System (FIPS) code (See Appendix C of this Guide) consists of six digits:
4-4 PSSCCC. P SS CCC Stimulus: Press the ENTER key while 5. SET STATION FIPS CODE is displayed on the LCD Screen. The LCD Screen will display the currently selected station FIPS code. Defines a subdivision, and must be 0 for station FIPS identification. Is a 2-digit State code. Is a 3-digit County code. EXAMPLE:
STATION: 006085 Flashing digits will prompt for entry of the 2-digit state code followed by the 3-digit county code. Use numeric keys 0-9 to enter FIPS code digits. The key will backspace; the D key will forward space. After the last digit is entered, the selected location will be displayed to prompt the operator to accept it. Press ENTER to accept the displayed FIPS code. Press EXIT to cancel an entry. EXAMPLE:
006085 SANTA CLARA CA The 006085 will be stationary and flashing; SANTA CLARA CA will scroll from right to left. For the Cable Version of the EAS 911:
Press the SUBDIVISION key. ZONE: ' code appears on the LCD, when code is ALL or 1 to 16. Use the arrow keys (D Select a zone for encoding by pressing the ENTER key. The presence of the '
selected. Pressing the ENTER key will toggle the diamond ('
Press EXIT to confirm and end.
) to scroll through the list of 16 zones.
) to change the status of each zone. indicates that the zone is 4.8 SET STATION IDENTIFICATION CODE This is the call sign of a broadcast station or other identification of a cable station, or NWS office transmitting or forwarding the message. This code is automatically affixed to all outgoing messages by the EAS encoder. It is limited to 8 characters. 1. Press the ENTER key while 6. SET STATION IDENTIFICATION CODE is displayed on the LCD Screen. The LCD Screen will display the currently selected identification code. EXAMPLE:
WAAA/FM is displayed on the LCD Screen. W will begin flashing, indicating that it may be changed using the Arrow keys. After finding the correct alphanumeric character with the Arrow keys, press ENTER to accept. A will begin flashing, indicating that it may now be changed in the same way using the Arrow keys and the ENTER key to accept. This procedure is repeated until all the characters have been updated. 4.9 NOT AVAILABLE 4.10 CHANGE PRIMARY PASSWORD The primary password is used for Encoder access and consists of 3 digits. It is set to 911 at the factory and is configurable from 000 to 999. Press the ENTER key while 8. CHANGE PRIMARY PASSWORD is displayed on the LCD Screen. The LCD Screen will display the current primary password. EXAMPLE:
4-5
911 PRIMARY is displayed on the LCD Screen. The first digit, 9, will begin flashing, indicating that it may be changed by pressing one of the numeric entry keys 0-9. After a digit is entered, the next digit will begin flashing. After all three digits have been entered, the entire password will flash, prompting for verification. EXAMPLE:
911 VERIFY will be displayed, with 911 flashing. Press ENTER to accept; press EXIT to leave the password unchanged. 4.11 CHANGE SETUP PASSWORD The Setup Password is used for Setup Menu access and consists of 3 digits. It is set to 912 at the factory and is configurable from 000 to 999. Press the ENTER key while 9. CHANGE SETUP PASSWORD is displayed on the LCD Screen. The LCD Screen will display the current Setup password. EXAMPLE:
912 SETUP is displayed on the LCD Screen, with 9 flashing. The Setup password may be changed in the same manner as the Primary password. Recover Lost Password 4.12 If a password is lost or forgotten, the default passwords can be restored by entering the following key sequence when in Ready mode:
Press CANCEL, EVENT CONFIRM. The LCD will display PRESS PASSWORD. Do NOT press PASSWORD, but wait for the date and time to return to the LCD. Each of the following key entries will cause PRESS PASSWORD to appear in the LCD. Do NOT press PASSWORD, but WAIT FOR THE DATE AND TIME TO RETURN before pressing the next key:
Press 4, 0, 8, 7, 2, 7, 7, 2, 7, 2, LOCATION CONFIRM. (Do This SLOWLY) You will hear a beep indicating that the default passwords have been restored. The default Primary password is 911; the default Setup password is 912. A 2 kHz tone will acknowledge restoration of the default passwords. 4.13 SELECT EVENTS TO AUTO FORWARD (See Appendix F for Listing) EAS events may be selected for auto forwarding. When in Auto Mode, the event code contained in a header will be compared with the event codes selected for automatic forwarding to decide if the message should be forwarded. In Auto Mode, priority EAN and EAT events will be forwarded automatically without delay. In Manual Mode, EAN and EAT events must be manually forwarded without delay. Press ENTER while 10. SELECT EVENTS TO AUTO FORWARD is displayed on the LCD Screen. The first EAS event will be displayed. The event will appear in a static display, the description will scroll. EXAMPLE:
character indicates that the event has been selected for automatic forwarding. If the diamond is absent, ADR Administrative Message The the event has not been selected. The ENTER key selects or deselects an event. The Arrow keys select the next event in alphabetical order. The ENTER key is again used to choose to forward the next displayed event. The process continues until all events have been defined. Press EXIT to end. 4.14 ADD LOCATIONS TO AUTO FORWARD (See Appendix C for Listing) A list of locations to Auto Forward may be specified. When in Auto Mode, the location code contained in a header will be compared with the location codes selected for automatic forwarding to decide if the message should be forwarded. A maximum of 256 locations may be forwarded. Press ENTER while 11. ADD LOCATIONS TO AUTO FORWARD is displayed on the LCD Screen. The LCD Screen will display a location of 000000. 4-6
EXAMPLE:
FORWARD: 000000 appears on the LCD Screen. Flashing digits prompt for entry of the 2-digit state and 3-digit county code. Use the numeric 0-9 keys to enter FIPS code digits. the key will backspace; the D selected location will be displayed for acceptance. key will forward space. When the last digit is entered, the EXAMPLE:
006085 SANTA CLARA CA The FIPS code will flash in a static display; a description of that location will scroll. Press ENTER to add the location displayed; press EXIT to reject it. More locations may be added in the same manner. Duplicate locations are not permitted. Model 911 (Cable versions of the EAS 911) have the capability of addressing additional zones through an RF modulator when used with the TFT cable in-home alerting device. Zone programming is described in Section 4.15 below. 4.15 VERIFY OR DELETE LOCATIONS TO AUTO FORWARD This menu item permits verification or deletion of location codes previously selected for automatic forwarding. Press ENTER while 12. VERIFY OR DELETE LOCATIONS TO AUTO FORWARD is displayed on the LCD Screen. The first of the locations selected for automatic forwarding is displayed on the LCD Screen. The FIPS code is shown in a static display, and a description of that location scrolls. EXAMPLE:
006085 SANTA CLARA, CA appears on the LCD Screen. The indicates that this location has been selected for automatic forwarding. The ENTER key will toggle the diamond off/on, changing the status of each location. The D and keys can be used to scroll through the list. Press EXIT after deleting locations to forward. Press ENTER to accept changes to the list of locations to forward. If EXIT is pressed, no changes will be made. Duplicate locations are allowed. For the Cable Version of the EAS 911:
Press the SUBDIVISION key. ZONE: ' code appears on the LCD, when code is ALL or 1 to 16. Use the arrow keys (D Select a zone for auto forward by pressing the ENTER key. The presence of the '
selected. Pressing the ENTER key will toggle the diamond ('
Press EXIT to confirm and end.
) to scroll through the list of 16 zones.
) to change the status of each zone indicates that the zone is 4.16 NOT AVAILABLE 4.17 NOT AVAILABLE 4.18 VOICE RECORDER INSTALLED?
Verify the presence of the internal voice recorder. Press ENTER while 16. VOICE RECORDER INSTALLED? is displayed on the LCD Screen. The LCD Screen will dis play VOICE RECORDER YES (NO). YES indicates that the voice recorder is installed and enabled. NO indicates that the voice recorder is not installed or it is not enabled. Hardware will detect the presence of the voice recorder and automatically enable it if installed. This function can be used to enable or disable the voice recorder via software. 4.19 NOT AVAILABLE 4.20 NOT AVAILABLE 4-7 4.21 ENABLE CHAR GEN INTERFACE This command enables or disables the character generator interface. The COM2 port on the Four Port Communications Expander Option Module sends serial data to remote character generators using RS-232 levels. The TFT Standard Interface protocol specifications are found in Appendix C. Standard TFT I/F for BSS, Frontline, and D Co. EAS Systems Direct Interface to CHYRON CODI Direct Interface to VDS 840 Alternate TFT I/F for Trilithic EAS Systems Alternate TFT I/F for Next Level EAS Systems Press ENTER while 18. ENABLE CHAR GEN INTERFACE is displayed on the LCD Screen. The LCD Screen will display STD. It will then scroll the following: Standard TFT I/F for BSS, Frontline, and D Co. EAS Systems The following six submenus are available:
CHAR_GEN_I/F:OFF STD CODI VDS ALT1 ALT2 Use the Arrow keys to select the desired submenu, then press ENTER to select the displayed setting. ALTERNATE 1 commands are described in Appendix E. If the TFT standard interface is enabled, a character generator must communicate properly in the TFT protocol in order for the EAS 911 to forward EAS alerts automatically. If the TFT interface is enabled and a character generator is not connected or communicating, all auto-forwarded messages will be aborted. A message can always be manually forwarded to allow the audio to be transmitted even if the character generator is not connected. If the CODI interface is enabled, messages will not be aborted if the CODI is not connected. If the CODI interface is selected by pressing ENTER when CHYRON CODI I/F is displayed, you may use the arrow keys and ENTER to select the sub menus listed below. Again use the arrow keys to select the desired value and press ENTER to store the value. Press the EXIT key to move one level up in the menu selection process. The factory set default parameters are shown first in the menu listing below. Note:
Horizontal Phase, Subcarrier Phase and Key Delay should only be adjusted using the alignment procedures described in the Chyron CODI Operator Manual. SET CHAR HEIGHT Height = 5 (range is 1-7) SET COLOR Color:White (also Magenta, Blue, Cyan, Yellow, Green, Red, Black) SET CRAWL SPEED Speed = 2 (range is 1-6) SET CRAWL COUNT Crawl Count = 2 (range is 1-8) SET DISPLAY LINE Line = 50 (range is 30-160) SET HORIZ PHASE H Phase = 0 (range exceeds 90) SET SUBCA PHASE SubC Phase = 0 (range exceeds 90) SET KEY DELAY Key Delay = 0 (range is 10) If the VDS interface is selected by pressing ENTER when VDS I/F is displayed, you may use the arrow keys and ENTER to select the submenus listed below. Again use the arrow keys to select the desired value and press ENTER to store the value. Press the EXIT key to move one level up in the menu selection process. The factory set default parameters are shown first in the menu listing below. SET CHAR HEIGHT Height = 3 (range is 1 to 4) SET COLOR Color:White (also Yellow Cyan, ,Green, Magenta, Red, Blue or Black) 4-8 SET CRAWL SPEED Speed = 2 (range is 1-3) SET CRAWL TIME Time = 1 (range is 1-9 min) SET DISPLAY LINE Line = 50 (range is 40-100) SET VDS EDITOR ON or OFF When ON, the ALERT RELAY will close during EAS transmission to control VDSs second COM port. The relay will stay closed until the VDs timeout. If it is OFF, all operation is normal. 4.22 NOT AVAILABLE 4.23 SET LCD SCREEN CONTRAST This menu item is used to set the LCD Screen contrast. There are 4 contrast levels (0 to 3), with 0 giving the least, and 3 giving the most contrast. Press ENTER while 20. SET LCD CONTRAST is displayed on the LCD Screen. The LCD Screen displays the current LCD Screen contrast setting. EXAMPLE:
LCD CONTRAST: 2 is displayed on the LCD Screen. Press the Arrow keys to select other contrast settings. The LCD Screen will reflect the new contrast setting. Press ENTER to accept the displayed setting. Press EXIT for no change. 4.24 RECORD VOICE ANNOUNCEMENT An announcement may be prerecorded for later playback. To record the announcement, the Voice Recorder must be enabled. The maximum announcement duration is 25 seconds. Press ENTER while 21. RECORD VOICE ANNOUNCEMENT is displayed on the LCD Screen. The LCD Screen will display a bar graph of the signal level on CH1. The audio from CH1 will be heard through the speaker. Use the bar graph to adjust the input signal level. Press ENTER to begin recording. The LCD Screen will display the elapsed duration as the announcement is recorded. EXAMPLE:
RECORDING 01 Press EXIT to terminate recording. After the announcement has been recorded, it will automatically be replayed. Press EXIT to end. 4.25 VERIFY VOICE ANNOUNCEMENT The prerecorded voice announcement can be played back from the Voice Recorder. The Voice Recorder must be enabled and the announcement must have been recorded previously. Press ENTER while 22. VERIFY VOICE ANNOUNCEMENT is displayed on the LCD Screen. The SPKR LED lights to allow adjustment of speaker volume. The LCD Screen will display: ANNOUNCEMENT: 25 (or the length of the recorded announcement in seconds). The speaker will play back the prerecorded announcement. The LCD Screen will count down as the announcement is replayed. Press EXIT to interrupt playback and return to the Setup Menu. 4.26 NOT AVAILABLE 4.27 NOT AVAILABLE 4.28 SET ALERT TIMEOUT MINUTES. Use the arrow keys to select the desired Alert Timeout from 2 to 15 minutes, then press ENTER to accept. The Alert Timeout is used to artificially terminate an alert sequence that did not conclude with a proper EOM (End of Message). 4.29 SET ONE-BUTTON MANUAL FORWARD Press ENTER while 25. SET ALERT TIMEOUT is displayed on the LCD. The LCD will display 2 4-9 Press ENTER while 26. SET ONE-BUTTON MANUAL FORWARD is diplayed on the LCD. The LCD will display FAST FWD: YES (NO). Use the arrow keys to select YES or NO, then press ENTER to accept. See section 6.4.5 for details on manually forwarding messages. CAUTION: One-Button Manual Forward bypasses password protection. This menu item also enables a One-Button Manual Forward from EAS 941A Remote Control/Status Modules connected to the EAS 911. 4.30 ENABLE CG TEXT FOR RWT This menu item allows the user to enable or disable the text output to an external character generator for the Required Weekly Test. Press ENTER while 27. ENABLE C.G. TEXT FOR RWT is displayed on the LCD Screen. RWT CG: NO will be displayed. Use the D or displayed. key to select RWT CG:YES if desired. Press ENTER when the desired setting is 4.31 SET AUTO MODE TIMER This menu item allows the user to program the EAS 911 to automatically switch between AUTO and MANUAL mode at selected times. Press ENTER while 28. SET AUTO MODE TIMER is displayed on the LCD Screen. AUTO MODE: OFF will be displayed. Use the D or key to select AUTO MODE: ON if desired. Press ENTER when the desired setting is displayed. If AUTO MODE: ON is selected, SET AUTO ON will be displayed next. Press ENTER to allow entry of time to switch AUTO mode ON. AUTO ON: 00:00 will be displayed. Use the D and keys to select the hour, then press ENTER. Use the D and keys again to select the minute, then press ENTER. SET AUTO ON will now be displayed. Use the D and keys to display SET AUTO OFF and press ENTER to enter the time to switch AUTO mode OFF. AUTO OFF: 00:00 will be displayed. Use the D and keys to select the hour, then press ENTER. Use the D and keys again to select the minute, then press ENTER. SET AUTO OFF will now be displayed. Press EXIT to return to the Setup Menu. The AUTO/MANUAL mode can still be set manually from the front panel. However, if the Auto Mode Timer is enabled, it will override the mode at the first occurrence of the ON or OFF time. If the ON time is set equal to the OFF time, the Auto Mode Timer will have no effect on the mode. 4.32 RECORD ALERT VOICE MESSAGE An alert voice message may be prerecorded for later playback with the next manually encoded or manually forwarded message. To record the announcement, the Voice Recorder must be installed and enabled. Connect the audio source to the Channel 1 (CH1) audio input of J102 on the EAS 911 rear panel. The maximum announcement duration is 2 minutes. This recording will be superceeded by the next EAS voice message. Press ENTER while 29. RECORD ALERT VOICE MESSAGE is displayed on the LCD Screen. The LCD Screen will display a bar graph of the signal level on CH1. The audio from CH1 will be heard through the speaker. Use the bar graph to adjust the input signal level. Press ENTER to begin recording. The LCD Screen will display the elapsed duration as the announcement is recorded. EXAMPLE:
RECORDING 01 Press EXIT to terminate recording. After the message has been recorded, it will automatically be replayed. Press EXIT to end. 4.33 VERIFY ALERT VOICE MESSAGE The prerecorded alert voice message can be played back from the Voice Recorder. The Voice Recorder must be installed and enabled, and the message must have been recorded previously. Press ENTER while 30. VERIFY ALERT VOICE MESSAGE is displayed on the LCD Screen. The SPKR LED will light to allow adjustment of speaker volume. The LCD Screen will display: ANNOUNCEMENT: 120 (or the length of the recorded announcement in seconds. The speaker will play back the prerecorded message. 4-10 The LCD Screen will count down as the message is replayed. Press EXIT to interrupt playback and return to the Setup Menu. 4.34 NOT AVAILABLE 4.35 NOT AVAILABLE 4-11 SECTION V INSTALLATION INTRODUCTION 5.1 This section describes the installation of the EAS DECODER and its related options and equipment after it has been programmed according to methods described in Section IV. The EAS DECODER installation requires the Encoder output and Decoder input level adjustment, as well as connecting the various optional and related equipment onto the EAS DECODER Rear Panel. Electrical ground for the EAS DECODER is established through the AC power cord. If a mo re substantial technical ground is available, it may be connected to the chassis box directly, using a short piece of braid. Proper grounding, good engineering practice, and safety depend on the knowledge and care of the installing engineer. The EAS DECODER is designed to mount in a 19 rack or cabinet using (4) 12-24 pan head machine screws. Mounting requirements: Size: 5.25H x 19W x 10D Maximum. Weight: Approximately 14 lbs. Power requirements: Input power: 117 VAC @ 60 Hz, 50 watts maximum, 3 Prong Power Cord - UL style SVT Environmental requirements: 0 C to 50 C (32 F to 122 F). General Hazards:
a. Elevated Operating Ambient Temperature - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum rated ambient temperature. greater than room ambient. b. Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised. c. Mechanical Loading - Mounting of the equipment in a rack should be such that a hazardous condition is not achieved due to uneven mechanical loading. d. Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuit might have on overcurrent protection and supply wiring. e. Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g., use of power strips) 5.2 AUDIO OUTPUT LEVEL ADJUSTMENT FCC regulations state that Broadcast stations are responsible for ensuring that the equipment for generating the EAS codes and the Attention Signal can modulate a broadcast station transmitter at no less than 80% of main channel modulation. Measured at peak modulation levels, each of the Attention Signal tones should modulate the transmitter at not less than 40%. These two calibrated modulation levels should have values that are within 1 dB of each other. This procedure sets the proper signal level at the audio output of the EAS DECODER Connections are made to the AUDIO OUTPUT, J4, with a standard XLR connector. 1. Enter the primary password. the LCD Screen will display SELECT EVENT. 2. Press the ENTER key in the Decoder section of the front panel. The LCD Screen will display OPERATION MENU briefly and then display REVIEW RECEIVED MESSAGES. 3. Use the Arrow (D RELAY OPEN.
) keys to scroll through the Operations Menu to SET OUTPUT LEVEL: ON-AIR 5-1 4 Press the ENTER key to select. The LCD Screen will display LEVEL: 2. 2 Vp-p 5 Adjust the audio output level by using the Arrow keys while reading the level indication on the LCD Screen. As the Arrow keys are pressed, the output level will be incremented or decremented in 0.1 Volt steps Press ENTER to accept an indicated output. Set the output to comply with the modulation percentage stated above. 5.3 DECODER AUDIO INPUT LEVEL ADJUSTMENT This procedure adjusts the signal level to the EAS DECODER Decoder at J102. Connections are made with the supplied mating connectors for J102. The pins are numbered from left to right when viewing the back panel. Pinouts are defined as:
Pin 1 2 3 4 5 6 CH3 + AUDIO INPUT CH3 SHIELD GROUND CH3 - AUDIO INPUT CH4 + AUDIO INPUT CH4 SHIELD GROUND CH4- AUDIO INPUT Description Note:
The Decoder input can accommodate signals at levels of 0.5 Vp-p to 2 Vp-p. It is desirable to keep the Decoder input level at 1.5 Vp-p to utilize its full dynamic range. 1. Connect the received audio source to J102, Channel 3. 2. Press the SPKR key to activate the speaker on Channel 3. The LCD Screen will show the channel number followed by the audio signal level in bar chart form. 3. Observe the incoming level of the source. 4. If necessary, adjust the monitoring source output level for proper indication. Do not allow audio level to exceed 2 V on peaks. 5. Each time the SPKR key is pressed, it advances to the next channel in sequence. The speaker mutes after the last channel is exited. The SPKR LED illuminates when the speaker is active. 6. Repeat Steps 1 through 4 for J102, Channel 4, 5, 6 . 5.4 DIGITAL INTERFACE J103 (RS-232) The Digital Interface J103 RS-232 Port is the digital data input required by 11.33(a)(1) of the FCC Rules. It is mandated to be RS-232C with standard protocol and 1200 baud rate. Although it could be used, as described by the FCC, for Radio Broadcast Data System (RBDS), NWR, satellite, public switched telephone network, or other sources that may in future applications use EAS protocol, no specific standard is defined. Therefore, this interface connector is reserved for future expansion. 5.5 DIGITAL INTERFACE J104 (RS-232) The Digital Interface J104 RS-232 Port is the digital data output required by 11.32(a)(3) of the FCC Rules. It is mandated to be for data messages (RS-232C with standard protocol and 1200 baud rate) for future applications. 5.6 THE ON-AIR RELAY The On-Air Relay operates (closes) when the EAS Decoder is in Auto mode and a valid and "tagged" EAS message is received, or when a message is manually forwarded. The relay provides a single set of dry contacts, rated 60DVC, 3A. Contacts are Normally Open. The relay can be used to control the TFT Model 940 Program/Transmitter Interrupt unit. The On-Air Relay closes only when the 911D transmits a header, attention signal, voice recording, or EOM. 5-2 5.7 THE ALERT RELAY The Alert Relay operates (closes) when a valid EAS header is detected by the Decoder. The relay provides a single set of dry contacts, rated 3 A 250 VAC. Contacts are Normally Open. When the relay operates, it remains closed until reset either locally or by remote control, or upon detection of an EOM. If no EOM is detected the relay will reset after 2 minutes except during an EAN or EAT alert. Note:
Receipt of an EAN or EAT alert defeats the manual reset capability of the Alert Relay. When an EAN or EAT alert is received, the relay will reset only upon detection of an EOM. The Alert Relay contacts are available at rear panel connector J107. 5.8 PRINTER/SPEAKER INHIBIT (J109) This 2 pin connector is provided to inhibit (mute) the printer and speaker when desired. A normally open switch or relay can be connected to J109. When the contacts are open, the EAS DECODER printer and speaker will operate normally. When the contacts are closed, the speaker will be muted and the printer will be disabled. Incoming messages will continue to be logged and can be printed at the operator's convenience. 5.9 NOT AVAILABLE 5.10 NOT AVAILABLE 5.11 NOT AVAILABLE 5.12 NOT AVAILABLE 5.13 COMM EXPANDER, FIELD INSTALLATION The optional COMM Expander can be plugged into the EAS Decoder Main PCB J113 Connector . It provides communication links to the following EAS 911D related equipment. COM 2 This 9 pin J302 connector is provided on the 4-Port Communications Expander Option Module. It is an RS-232C interface intended for the character generator interface and is configured for the TFT protocol. 5.14 FRONT PANEL PRINTER, FIELD INSTALLATION The Printer can be installed into the right Front Panel opening of the EAS 911D (See Figure 5.11-1). Ribbon cable is then installed to connect the Printer into J122 connector of the EAS 911D Main Board. See Section 8.4.1 to change paper and paper specifications. 5.15 NOT AVAILABLE 5-3 SECTION VI OPERATION INTRODUCTION 6.1 This section describes EAS DECODER operating procedures. A Primary, or Operator password must be entered into the EAS DECODER. A Secondary, or Setup Password is required, in addition, to set or make changes in operating parameters. As shipped from the factory, the EAS DECODER has Primary and Secondary passwords programmed to default values of 911 and 912, respectively. 6.2 LEFT SECTION Figure 6-1. Front Panal Left Section Controls and Indicators 6.2.1 Use of the HELP Key and HELP Menu The HELP key provides two types of help: a comprehensive menu of topics and an On-Line help system that provides specific information about a mode or operation. Both types of Help messages can be printed by the front panel printer. The comprehensive list of topics can be accessed in Ready mode by pressing the HELP key. A list of Help topics will be printed and and will be displayed on the LCD screen. For further information on any topic, enter the topic's two-digit number using the 0-9 numeric keys and press the HELP key. Sub-topics will be printed and will be displayed on the LCD screen. Enter the desired sub-topic's three digit number and press HELP. Help information for the sub-topic will be displayed and printed. Example: 404. To print screen: Press the PRINT key to print what is shown on the LCD screen. On-Line Help is available when modes or operations have been selected in the Operation and Setup Menus. Press HELP to obtain specific information about a mode or operation. All Help topics are listed in Table 6.2.1. 6-1 10. Password Help 101 Access to Encoder 102 Access to Setup Menu 103 104 To Change Passwords Password Lost 20. Encoder Operation Help 201 NOT AVAILABLE 202 NOT AVAILABLE 203 NOT AVAILABLE 204 NOT AVAILABLE 205 NOT AVAILABLE 206 NOT AVAILABLE 207 NOT AVAILABLE 208 NOT AVAILABLE 209 NOT AVAILABLE 210 NOT AVAILABLE 30. Decoder Operation Help Table 6.2.1 EAS DECODER Help Menus 50. Encoder Setup Help 501 502 503 504 505 506 507 508 509 510 To Set Current Date/Time To Set Station Time Zone Daylight Saving?
To Set Station Originator Code To Set Station FIPS Code To Set Station Identification Code To Set Attention Signal Duration NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE 60. Decoder Setup Help 601 602 603 To Select Events to Auto Forward To Add Locations to Auto Forward To Verify or Delete Locations to Auto Forward 70. Accessory Setup Help 701 702 703 To Enable Character Generator Interface Voice Recorder Status NOT AVAILABLE 301 302 303 304 401 402 403 404 To Acknowledge a New Message To Change Between Automatic and Manual Mode To Manual Forward a Message 704 To Record Voice Announcement To Review Received Message Log 40. Audio/Printer Operation Help To Set Output Level On-Air To Set Output Level Off-Air 705 706 707 708 To Verify Voice Announcement To Enable CPU Interface To Install Program Interrupt Unit To Enable Remote Control Status Modules Speaker Volume Adjustment 80. Maintenance and Technical Support Help To Print Screen 801 803 To Replace Printer Paper TFT Customer Service 6.2.2 Not available 6.2.3 Not available Not available 6.2.4 6.2.5 Not available 6-2 Use of the CANCEL Key 6.2.6 The CANCEL key may be used to return to a previous entry mode. During transmission of manually forwarded messages, CANCEL may be pressed to deactivate the ON-AIR relay and abort message transmission. THE cancel key may be used to extinguish the flashing MSG WAITING LED when a message is not to be forwarded. Press the flashing MSG button once to advance to MANUAL FWD, then press the CANCEL button to cancel the flashing MSG WAITING LED. 6.2.7 Use of the PRACTICE Key for Off-Air Testing and Training The Practice mode permits use of the EAS DECODER for test and training without activating the On-Air relay or an external Video Character Generator. Press the PRACTICE key in Ready mode to enter the Practice mode. The PRACTICE key will illuminate. The On-Air relay will be deactivated, and no data will be transmitted to a video character generator. All functions of the EAS DECODER will be available in Practice mode. Practice transmissions will not be entered into the transmit log. Printouts of practice transmissions will include the designation "PRACTICE." The unit will exit Practice mode before automatically forwarding an EAS message. 6.2.8 The EAN/EAT Operations The EAN event code (Emergency Action Notification) is reserved to notify broadcast stations, cable systems, industry and the general public that the EAS has been activated by the President for a national emergency. The EAT event code (Emergency Action Termination) is similarly reserved to give notice that the EAN has been terminated. In the event of a national emergency, the EAN header will be transmitted, followed by a Presidential message and concluded with an EAT when appropriate. Neither the EAN nor the EAT codes can be initiated by the EAS DECODER, but EAN and EAT will be forwarded in either manual or automatic mode. 6.3 LCD SCREEN, PRINTER, SPEAKER AND CONTROL KEYS 6.3.1 General Discussion The Liquid Crystal Display (LCD) Screen, Speaker, and Printer are used to: 1.) Program the encoder and review messages; 2.) Monitor audio inputs and messages, and 3.) Print the transmit and receive logs, displayed messages and menus, respectively. 6.3.2 Use of the Up D The Up D Arrow Keys (or Increment and Decrement keys) are used to scroll up and down menus and to increment and decrement alphanumeric characters in certain menus. They are also used to set the speaker volume. 6.3.3 Use of the EXIT Key The EXIT key is used to exit the current menu or mode and return to the previous menu or Ready mode. During manual or automatic forwading of an EAS message, EXIT aborts message transmission. Pressing EXIT momentarily in Ready mode will cause the current software revision to appear in the LCD. Pressing EXIT for three or more seconds will act as a system reset causing the unit to return to Ready mode. 6.3.4 Speaker Volume Adjustment The speaker volume can be adjusted with the SPEAKER and Arrow keys. In the Ready mode and during transmit, press the SPEAKER key. The SPEAKER key will illuminate, and the volume can be increased or decreased with the Arrow keys. Press ENTER to accept. In Setup mode and in 21. Record Voice Announcement or 22. Verify Voice Announcement, press SPEAKER. The speaker key will illuminate, and the volume can be increased or decreased with the Arrow keys. Press ENTER to accept. In Operation mode and in SET OUTPUT LEVEL: ON-AIR RELAY OPEN (or CLOSED) press SPEAKER. The speaker key will illuminate and the volume can be increased or decreased with the Arrow keys. Press ENTER to accept. 6.3.5 Print Message from the LCD Screen Pressing the PRINT key causes the item displayed on the LCD screen to be printed. A time stamp is appended to all printer output. and Down and Down Arrow Keys 6-3 6.4 Front Panel Right Section The front panel right section manages all functions associated with incoming EAS signals. Those functions include:
Providing alert signals upon receipt of valid headers Monitoring and decoding incoming EAS headers Monitoring incoming audio signals through the speaker and with LED indicators Reviewing Transmit and Receive message logs Setting Manual and Auto Forward modes Decoder Front Panel Right Section are shown in Figure 6.3-1. Figure 6.3-1 Decoder Controls and Indicators THIS THIS THIS 6.4.1 LED Indicators The LED Indicators monitor audio activity on Channels 1 and 2. When the input signal level to a Channel exceeds
-10 dBm, its LED will illuminate. The Channel D LED monitors the RS-232 Channels and illuminates upon receipt of data. 6.4.2 Manual and Auto Forward Mode Selection Incoming EAS messages can be forwarded Automatically or Manually with operator intervention. In Automatic mode, messages are forwarded immediately upon receipt. In Manual mode, messages can be reviewed by an operator before being forwarded. The MODE key toggles between the Manual and Automatic operating modes. 1. Press the MODE key. The LCD screen will display PASSWORD?, and the PASSWORD key will begin flashing. 2. Enter the primary password. The Mode will toggle from Manual to Auto, or vice-versa. The current Mode will be indicated by a yellow LED. 6-4 6.4.3 Reviewing Previous EAS Messages The last EAS message can be reviewed from Ready mode by pressing the REVIEW key. The last message will scroll on the LCD screen, and the voice message will be heard through the speaker. As many as ten messages can be buffered in the Received Message Log. To view the messages in the log:
1. Enter the Primary Password. The LCD screen will display SELECT EVENT. 2. Press the ENTER key. The LCD screen will display OPERATION MENU briefly, then REVIEW RECEIVED MESSAGES. 3. Press ENTER. 4. The LCD screen will display 01 and the last received message. If a diamond character () follows the 01, it indicates that the message has not yet been printed. 5. Use the Arrow keys to scroll through the messages. 6. Press the PRINT key to print any of the messages. 6.4.4 Acknowledging the Last EAS Message and Resetting the Alert Relay When an EA S message is received, The MSG WAITING key will begin flashing, the Alert Relay LED will illuminate, and the alert relay contacts will close. After reading the message scrolling on the LCD screen, acknowledge receipt of the message by pressing the MSG WAITING key. The Alert Relay contacts will open, its LED will extinguish and the MSG WAITING LED will extinguish. 6.4.5 Manually Forwarding An EAS Message After Review After reviewing an EAS message, it can be forwarded as follows:
1. Press the MANUAL FWD key. The LCD will display PASSWORD?
2. Enter the Primary password. The message will be displayed on the LCD, and the SEND HDR key will flash. Press the SEND HDR key. The LCD will display SENDING HEADER, and the Header will be forwarded. The LCD will then display SEND VOICE/EOM, and SEND HEADER and SEND EOM keys will flash 3. Press the SEND HEADER key to send the recorded alert voice message. If the recorded message is not desired, studio personnel can insert a local message from your audio console without pressing the SEND HEADER key. 4. Press the SEND EOM key. The LCD will display SENDING EOM. 5. The EAS DECODER will return to Ready mode. If One-Button Manual Forward is enabled, a message can be forwarded by pressing the MANUAL FORWARD key. The header, two-tone attention signal, voice message and EOM will be transmitted automatically. Before forwarding, the recorded voice may be reviewed by pressing MSG WAITING, then REVW. CAUTION: One-
Button Manual Forward bypasses password protection. 6.4.6 Message Priority The Decoder uses an internal priority scheme to determine how to process multiple messages. The four levels of priority are:
a. National events (EAN/EAT):
National events have the highest priority and will interrupt all other events that are in progress, regardless of whether they have been queued through the Message Hold feature (see 6.5.9). b. Normal events (Flood, Blizzard, etc.):
Normal events will be interrupted by new (different) events, unless the original event is in the process of being auto-forwarded. In Manual mode, the original event may be queued by the operator to prevent a new event from interrupting the manual forward process until it is completed. c. Test messages (RWT and DMO):
Test messages can be forwarded (manually or automatically) if another event is not in progress, but will not interrupt a Normal or National evene for 15 minutes after it is received, or until that event has been forwarded. d. Duplicate and Expired messages:
6-5 Duplicate (identical to a previously received messasge, except for Station ID) and Expired ( duration of the event has expired) messages have the lowest priority, and are placed in the Receive Log and printed. They canot be forwarded and will not interrupt another message. FUNCTIONS AVAILABLE FROM THE OPERATION MENU 6.5 6.5.1 The Operation Menu The Operation Menu: 1.) Provides access to the transmit and receive logs; 2.) Permits testing of the On-Air and Alert relays; 3.) Permits adjustment of the output audio signal level; 4.) Provides options for Printer and Message handling; and 5) Permits testing of cable RF Modulator. To access the Operation Menu, enter the Primary Password, then press ENTER. The LCD screen will display OPERATION MENU briefly, then 1. REVIEW RECEIVED MESSAGES. 6.5.2 Review Received Messages Use the Arrow keys to scroll to 1. Review Received Messages. Press ENTER to review the messages. Messages will be numbered from 1 to 10 and will be in the order from most recent (1) to the earliest (10) Use the Arrow keys to move from one message to another; press ENTER to review the message. A diamond () next to the message number indicates that the message has not yet been printed on the front panel printer. 6.5.3 Review Transmitted Messages Use the Arrow keys to scroll to 2. Review Transmitted Messages. Press ENTER to review the messages. Messages will be numbered from 1 to 10 and will be in the order from most recent (1) to the earliest (10) Use the Arrow keys to move from one message to another; press ENTER to review the message. A diamond () next to the message number indicates that the message has not yet been printed on the front panel printer. 6.5.4 Test On-Air Relay Use the Arrow keys to scroll to 3. Test On-Air Relay. Press ENTER to close the On-Air relay contacts. The red ON-AIR LED will illuminate and the relay contacts will close for two seconds. After two seconds, the relay will open, and the LED will turn off. 6.5.5 Test Alert Relay Use the Arrow keys to scroll to 4. Test Alert Relay. Press ENTER to close the Alert relay contacts. The red ON-AIR LED will illuminate and the relay contacts will close for two seconds. After two seconds, the relay will open , and the LED will turn off. 6.5.6 Set Output Level: On-Air Relay Open This menu item permits adjustment of the audio output level from 0.5 to 6.0 volts peak-to-peak while the EAS Attention signal is transmitted. The On-Air relay will not close. Use the Arrow keys to scroll to 5. Set Output Level: On-Air Relay Open. Press ENTER. The LCD Screen will display the output audio level. Use the Arrow keys to increment or decrement the audio level in 0.1 volt steps. The XLR audio output (J101) will reflect the new level. Press ENTER to halt transmission and set the output level to the value displayed. Press EXIT to return to the Operation Menu. To adjust the speaker volume while setting the output level, press the SPEAKER key, then use the Arrow keys to adjust the volume. The Arrow keys will not affect the XLR output level when the SPEAKER key is illuminated. 6.5.7 Set Output Level: On-Air Relay Closed This menu item permits adjustment of the audio output level with the On-Air relay closed. Use the Arrow keys to scroll to 6. Set Output Level: On-Air Relay Closed. Proceed as in 6.5.6, Set Output Level:
On-Air Relay Open, above. 6.5.8 Set Printer Operation This menu item selects which messages will be printed. Use the arrow keys to scroll to 7 SET PRINTER OPERATION. Press ENTER. Use the arrow keys to select ALL, SELECTIVE, or HOLD. ALL (default) will print all messages;
SELECTIVE prints all outgoing messages, but only those incoming messages with Events/Locations selected for auto 6-6 forwarding. HOLD disables the printer. When HOLD is deselected, messages stored in the transmit and receive logs will resume printing. 6.5.9 Set Message Hold This menu item permits the most recently decoded forwardable message to be queued manually for output, locking out all other messages except a national emergency. Use the Arrow keys to scroll to 8. SET MESSAGE HOLD, and press ENTER. MESSAGE HOLD: NO will be displayed. Use the D or key to display MESSAGE HOLD:YES if desired. Press ENTER when the desired setting is displayed to return to the Operation Menu. If YES is selected and the EAS 911 is in MANUAL mode, the Message Hold mode is activated by pressing MESSAGE WAITING after a message has been decoded and the MESSAGE WAITING key is flashing. At this point, the display will indicate Message Queued, and other messages will be locked out until the message is manually forwarded or 15 minutes has passed. When the message is queued, it can be reviewed with the REVIEW key. Once activated, the Message Queued mode can be deactivated by press the MESSAGE WAITING key again. 6.5.10 Mark/Space Calibration This Operation Menu item appears only in the EAS 911. It allows the user to set the RF output level of the Cable RF modulator. Press the ENTER key when 9. MARK/SPACE CALIBRATION appears on the LCD screen. The EAS 911 will transmit alternating Marks and Spaces, and MARK/SPACE will appear on the LCD screen. The output level can be adjusted with the modulation Attenuator on the rear panel. Press ENTER or EXIT to terminate the Mark/Space transmission. 6-7 SECTION VII This section has been intentionally deleted. 7-1 SECTION VIII AM/FM RECEIVER Specifications 8.1 The EAS DECODER Receivers performance and physical specifications are listed in Table 8-1. Table 8-1 SPECIFICATIONS 88-108 MHz, digitally tunable in 100 kHz steps 75?, Type F connector 2 V for 20 dB quieting
-10 dBm to +3 dBm
(adjustable from rear panel) 600? balanced, 3-pin terminal block Less than 3% at 66.6% modulation 540 kHz to 1720 kHz, digitally tunable in 10 kHz steps Terminal block connector; external AM loop antenna supplied 20 V for 20 dB S/N 45 dB
-10 dBm to +3 dBm
(adjustable from rear panel) 600? balanced, 3-pin terminal block Less than 3% at 66.6% modulation FM RECEIVER MODULE Frequency Range Antenna Input Sensitivity Audio Output T.H.D. AM RECEIVER MODULE Frequency Range Antenna Input Sensitivity AGC Audio Ou tput T.H.D. 8.2 AM Receiver Module Block Diagram Description The AM Receiver module is tunable from 540 to 1720 kHz in 10 kHz steps. Audio output for external use is balanced 600 ohms at up to +3 dBm. Tuning is via three rotary DIP switches which are accessible by removing the associated front panel cover plate. An LED lights to show RF signal presence and audio output. Figure 8-1 is a block diagram of the AM Receiver module. (See Figure A-3 in Appendix A for the schematic diagram.) The following is a summary of the operating principles of this module. a. The AM Receiver module receives 540 to 1720 kHz AM program signals at its rear panel RF INPUT connector. The RF signal is routed to U1, the front end block consisting of a mixer, a voltage-controlled oscillator (VCO), a 450 kHz IF filter, and an AM Detector. b. The selected audio signal is amplified by U2 and sent to the BALANCED AUDIO OUTPUT terminal block connector on the rear panel. The audio output level of U2 is preset by manufacturer. 8-1 c. Frequency selection in 10 kHz steps is performed by a 3-digit BCD rotary DIP switch together with microprocessor U6 and a PLL frequency synthesizer consisting of U4, U5, Q1 and other components. d. The output at pin 5 of U1 is a DC voltage analog of the RSSI (RF level) of the input signal. This output can be measured at TP1 using a DC voltmeter. e. A DC sample of the RF signal level is routed to one input of comparator U3A; the other input is supplied from reference voltage VREF2 . A sample of the audio output level is routed to one input of comparator U3B; the other input is supplied from reference voltage VREF1 . When the RF signal level exceeds the reference voltage and the audio signal level exceeds the minimum requirements, the LED lights. Figure 8-1. AM Receiver Module - Block Diagram 8-2 8.3 FM Receiver Block Diagram Description The FM Receiver module is tunable from 88 to 108 MHz in 100 kHz steps. Audio output for external use is balanced 600 ohms at up to +3 dBm. Tuning is via three rotary switches which are accessible by removing the associated front panel cover plate. An LED lights to show adequate RF signal level and the presence of audio modulation. Figure 8-2 is a block diagram of the FM Receiver module. (See Figure A-5 in Appendix A for the schematic diagram.) The following is a summary of the operating principles of this module. a. The FM Receiver module receives 88 to 108 MHz FM program signals at its rear panel RF INPUT connector. The RF signal is routed to front end block U1 consisting of a mixer, a voltage-controlled oscillator (VCO), a 10.7 MHz IF filter, and an FM Detector and other components. b. The selected audio signal from U1 is amplified by U3 and sent to a BALANCED AUDIO OUTPUT terminal block connector on the rear panel. The audio output level from the Receiver board is preset by manufacture. c. Frequency selection is performed by a 3-digit rotary DIP switch along with microprocessor U7 and a PLL synthesizer consisting of U5, U6, Q1, Q2, and other components. d. The output at pin 10 of U1 is a DC voltage analog of the RSSI (RF level) of the input signal. This output can be measured by using a DC voltmeter at TP1 which is accessible by removing the associated front panel cover plate. Figure 8-2. FM Receiver Module - Block Diagram 8-3 Table 8-2. Receiver Front Panel Controls and Indicators ITEM TITLE FUNCTION Note:
4 5 AM RECEIVER RF & AUDIO TP1 1 MHz, 100 kHz, 10 kHz DX/LO FM RECEIVER RF & AUDIO TP1 10 MHz, 1 MHz, 100 kHz DX/LO Individual Receiver controls are accessible by removing the associated push-on cover (shown below) from the front panel. To remove the cover, push it upward to disengage its rear hooks, then pull gently forward to remove it from the front panel. Receiver module for AM broadcast band (540 - 1720 kHz) Figure 8-3. AM Receiver Module Edge-Mounted Controls and Indicators Yellow LED. Flashes when an RF signal is detected which is above the minimum level of 20 V and has audio modulation. Test point for RF Signal Strength Indication (RSSI) monitoring Rotary switches for setting receive frequency Local/Distant switch for setting receiver sensitivity Receiver module for FM broadcast band (88 - 108 MHz) Figure 8-4. FM Receiver Module Edge-Mounted Controls and Indicators Yellow LED. Flashes when an RF signal is detected which is above the minimum level of 10 V and has audio modulation. Test point for RF Signal Strength Indication (RSSI) monitoring Rotary switches for setting received frequency Local/Distant switch for setting receiver sensitivity 8-4 8.4 Rear Panel Controls and Connectors Receiver rear panel controls and connectors are shown in Figure 8-5. Numbered items in this figure are explained in Table 2.3-3 item 10 to 15. Figure 8-5. Receiver Section Rear Panel Controls and Connectors FM Radio Antenna Installation 8.5 The FM Receivers can typically share an outdoor VHF antenna. The antenna output is applied to an FM/TV 2-way signal splitter which is supplied with the EAS DECODER. The type of VHF antenna can be a Radio Shack VHF/FM Stereo antenna, Part No. 15-2158 or Part No. 15-2164 for shorter receiving distances. The splitter outputs are fed to the EAS DECODER FM Receiver inputs. AM Antenna Installation 8.6 In high or moderate signal strength areas, the AM Receiver may operate satisfactorily using the indoor loop antenna supplied with the EAS DECODER. In weaker signal strength areas, an outdoor antenna may be required. An end-fed long-wire antenna (approximately 250 ft.) can be used with good results. One end of the long wire should be connected at the rear panel AM Receiver modules RF INPUT. Received Signal Strength Indication (RSSI) 8.7 Test Point TP1 located next to the frequency selection switches on each receiver module is the RSSI voltage of the receiver. The characteristics of the RSSI vs. the RF signal level at the input of the receiver is shown in Figures 8-6 and 8-7 for the FM, and AM Receiver, respectively. 8-5 4.0V 3.5V 3.0 V 2.5 V 2.0 V 1.5 V 1.0 V 2 V 1 P T T A I S S R L A C P Y T I 4.0 V 3.5V 3.0 V 2.5 V 2.0 V 1.5 V 1.0 V 1 P T T A I S S R L A C P Y T I 10 V RF INPUT AT J1 Figure 8-6 50 V 100 V 200 V 10 V 20 V 100 V 500 V RF INPUT AT J1 Figure 8-7 1 mV FM Receiver RSSI vs. RF Input AM Receiver RSSI vs. RF Input For reliable reception, the signal level from the antenna feed line must be high enough to provide an RSSI voltage greater than the values given below. The LOCAL/DISTANT switch should be set to the DX (Distant) position unless the RSSI exceeds the values given below:
FM Receiver AM Receiver FM Receiver AM Receiver
> 1.9 VDC
> 2.1 VDC
> 3.8 VDC
> 3.2 VDC 8-6 SECTION IX THEORY OF OPERATION 9.1 The EAS Information Super Highway The Emergency Alert System (EAS) is a nationwide network of radio and television broadcast and cable facilities that can originate or receive and forward (re-transmit) event- and location-specific Emergency Alert messages. Alert messages can originate from the White House, state and local safety agencies, Emergency Operation Centers
(EOC), and the National Weather Service (85% of alerts are weather related). When an agency is sues an Alert, it transmits an EAS header and message to local AM, FM, and TV stations and cable systems which, in turn, broadcast the message to the general public if the message matches the local requirements. The public can receive alert messages in a matter of seconds and can react quickly to impending emergencies. The EAS message contains digitally encoded event and location information in addition to a normal voice or text announcement. The encoded information permits the network of broadcast and cable stations to decode messages and forward them automatically or manually to a specific area affected by the emergency alert. 9.2 The EAS DECODER: An Overview The EAS DECODER is similar to a smart telephone answering machine. It receives and screens messages on one or two, records and stores them, and forwards selected messages manually or automatically. The digital header in the incoming message is decoded and translated, then displayed on the Liquid Crystal Display
(LCD) and logged on the printer. The event and location data is compared with the data stored in the Setup memory to determine if it should be forwarded. If the alert message is to be forwarded, the EAS DECODER inserts a new I.D. code and re-transmits it, along with a two-tone Attention Signal, the recorded voice message and an End Of Message signal. Forwarding can occur automatically or after operator intervention. Refer to Figure 9.2 for a simplified block diagram of the EAS DECODER. Audio Channel FSK Decoder EAS Message Memory EAS Encoder Audio Out Broadcast Transmitter Digital Voice Recorder Compare Yes: Auto Forward No: Ignore EAS CASTER User Programmed Memory Figure 9.2, EAS DECODER Block Diagram 9-1 A Closer Look: Detailed System Block Diagram 9.3 The EAS DECODER system consists of the Main Board, the Encoder and Decoder keyboards, the LCD Display Assembly, the Digital Voice Recorder, the Comm Expander and the Printer. Figure 1 in Appendix A illustrates the EAS DECODER system blocks in detail. 9.4 The EAS DECODER Main Board consists of three major system blocks: Audio Loop-Through and Switching, Digital Signal Processor/CPU, and Input/Output Control. 9.4.1 Audio Loop Through and Switching (Figure 2, Appendix A) The audio buffering, switching and control section is illustrated on sheet 1 of the Main Board schematic drawing
(6601-4060). Main Board (Figure 2, Appendix A) U1 and U2 provide two balanced input amplifiers for the Channel 1 and 2 audio inputs. Analog switches U3, U8 and U10 route audio signals to and from the inputs, outputs and voice recorder. U4 and U5 are Coders/Decoders
(CODECs) that convert the audio signals to digital data, and vice-versa. U7 provides two buffer amplifiers at the outputs of the CODECs. U11 is the internal speaker amplifier; U12 provides a balanced audio EAS message output. 9.4.2 Digital Signal Processor/CPU (Figure 2, Appendix A) The Digital Signal Processor (DSP) section and its related logic is illustrated on sheet 2 of the schematic drawing
(6601-4060). U14 is a Texas Instruments TMS320C26 digital signal processor that performs all encoding and decoding functions, and controls all I/O activity. U13 is a Field Programmable Gate Array (FPGA). It generates all internal timing signals and performs all internal digital signal routing. U15 is a real-time clock and provides battery backed-up memory for long term storage of setup information. U16 and U18 are the system random access memory (RAM);
U17 and U19 are the system read-only program memory. U21 is a reset circuit and watchdog timer. 9.4.3 Input/Output Control (Figure 2, Appendix A) Input/Output buffering and control for system peripherals and related equipment, is illustrated on sheet 3 of the schematic drawing (6601-4060). U25 through U29 are latches that control the printer, liquid crystal display (LCD), four port communication expander, audio multiplexers and relays. U23 controls the On-Air and Alert relays. U22 and U30 provide RS-232 inputs and outputs. 9.5 U501, U505. U509, U503, U507 and U511 in series form a 48-bit serial-to-parallel shift register that is used to illuminate the 40 encoder board LEDs. The bits of LED data are shifted in to the keyboard by the I/O control section, above, and then enabled to illuminate or flash the LEDs. U512, U510, U508, U506, U504 and U502 in series form a 48-bit parallel-to-serial shift register that is used to sense the 41 encoder key switches. The bits of switch data are shifted out of the encoder keyboard by the I/O control section, above, and are then interpreted by the DSP/CPU. Left Section Key Pad (Figure 4, Appendix A) 9-2 LCD Displ ay Assembly Right Section Key Pad (Figure 6, Appendix A) Digital Voice Recorder (Figure 8, Appendix A) 9.6 U601 and U603 in series form a 16-bit serial-to-parallel shift register that is used to illuminate the 12 decoder board LEDs. The bits of LED data are shifted in to the keyboard by the I/O control section, and then enabled to illuminate or flash the LEDs. U604 and U602 in series form a 16-bit parallel-to-serial shift register that is used to sense the ten decoder key switches. The bits of switch data are shifted out of the decoder keyboard by the I/O control section, above, and are then interpreted by the DSP/CPU. 9.7 The LCD Display Assembly is a 16-character back-lit display with contrast controlled by setup software. The LCD assembly is controlled by the FPGA through an 8-bit parallel data interface at U26 on the main board. 9.8 U3 is a sampling analog-to-digital (A-D) and digital-to-analog (D-A) converter that converts incoming voice messages to digital data and stores the data in memories U5, U6, U7, U8 and U9. U10 and U11 select memory locations for voice storage. To play back a message, U3 retrieves digital data from the memories and converts it back into its original analog form. U4 and U12 provide audio signal buffering, gain, and Automatic Level Control (ALC). U2 controls the routing of the audio input and output signals. The FPGA on the main board controls U3 and U2 through an 8-bit parallel data interface at U1. 9.9 An 24-column ASCII impact printer is controlled by the FPGA through an 8-bit parallel data interface. 9.10 An COM Port Expander provides communication links to external EAS DECODER related equipment such as a character generator or PC controller. U302 and U303 are Dual Asynchronous Receiver/Transmitters (DUARTs) that convert parallel data to serial data, and vice-versa. They transmit data to and from the main board through an 8-bit parallel interface at U301. They transmit data to COM2 outputs through EIA quad line driver U306. They receive data from COM2 from EIA quad line receiver U305. The DUARTs are controlled by the FPGA on the main board. COM Port Expander (Figure 12, Appendix A) Printer 9-3 SECTION X MAINTENANCE AND REPAIR 10.1 INTRODUCTION The EAS DECODER has no moving parts or components that require routine replacement. It requires only minor audio adjustment, which will be described later in this section. In addition, the printer paper and ribbon may need to be replaced. 10.2 TOOL AND TEST EQUIPMENT REQUIREMENTS The following tools and equipment are required for EAS DECODER maintenance:
Hand Tools Digital Voltmeter Oscilloscope Audio generator XLR out to 3-pin audio input cable 10.3 ROUTINE MAINTENANCE The EAS DECODER should require no routine maintenance other than printer paper and ribbon replacement. As equipment and systems external to the EAS DECODER change, audio level adjustments may be necessary. In addition, the real time clock contains a lithium battery that will require replacement after a number of years. Refer to Paragraph 10.3.3 for battery replacement procedure. 10.3.1 Calibration The EAS DECODER requires no routine calibration. 10.3.2 Audio Levels The EAS DECODER Output Audio Level and the Decoder Input Audio Level can be adjusted periodically as described below. 10.3.2.1 Audio Output Level Adjustment This procedure sets the proper signal level at the audio output of the EAS DECODER (J101). Proceed as follows:
1. To access the Operation Menu, enter the Primary Password, then press ENTER. The LCD will display OPERATION MENU briefly, then 1. REVIEW RECEIVED MESSAGES. 2. Use the up/down arrow keys (D
) to scroll to 6. Set Output Level: On-Air Relay Open. Press the ENTER key to activate the displayed menu selection. The LCD will respond by scrolling: LEVEL: 2.2 V pep. The LCD will display the output audio level. 3. Adjust the audio output level by using the up/down arrow keys while reading the level indication on the LCD display. As D volt steps. Press ENTER to accept an indicated output. The output should be set to comply with the modulation percentage stated above. A level of 2.2 V p-p corresponds to 0 dBm. keys are pressed, the audio output level will be incremented or decremented in 0.1 4. The two tones can be accessed individually by using the D TIME arrows. The 960 Hz tone, both, or the 853 Hz tone can be selected. 5. Press EXIT to return to the Ready mode. 10.3.2.2 Decoder Audio Input Level Adjustment 1. Connect the monitoring source to J102, Channel 1. 10-1
2. Press the SPKR key to activate the speaker on Channel 1. The LCD display shows the channel number followed by the audio signal level in bar chart form. Note:
The Decoder input can accommodate signals at levels of 0.7 Vp-p to 2 Vp-p. It is desirable to keep the Decoder input at 1.5 Vp-p to utilize its full dynamic range. Observe the incoming level of the source. 4. If necessary, adjust the monitoring source output level for proper indication. Do not allow audio level to exceed 2 Vp -p on peaks. 5. Each time the SPKR key is pressed it advances to the next channel in sequence. The speaker mutes after the last channel is exited. The SPKR LED illuminates when the speaker is active. 6. Repeat Steps 1 through 4 for J102, Channel 2. 10.3.3 Lithium Battery Replacement The real time clock, U15, uses a lithium battery. It will require replacement after a number of years. Replace only with a standard CR2032 lithium coin cell. In early versions of the EAS DECODER, the battery is contained within U15. Contact TFT for replacement information CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent the manufacturer. Dispose of used batteries according to the manufacturers instructions. type recommended by 10.4 PRINTER 10.4.1 Operator Information Door Latch Button To open the front door of the printer, twist the door latch button (1) counterclockwise using the thumb and forefinger. This will release the latch, and the door can be pulled outwards to expose the paper roll. Paper Feed Button To activate the paper feed, press the lower part of the paper feed button (2). This will continue for as long as the button is held down. Figure 10.4-1. Printer Controls 10-2 10.4.2 Paper Roll Replacement Proceed as follows to replace the printer paper:
1. Twist the door latch counterclockwise to release and open the door. 2. Depress the retention button to allow the paper roll to slide across the bar. 3. If paper does not remain in the feed slot from the old roll, cut or fold the end of the new roll into a V-shape as shown. Insert the point into the paper feed slot (See Method A). If paper does remain from the old roll, simply insert the blunt edge of the new roll on top of the old paper in the feed slot (See Method B). 4. Push the paper feed actuator arm to advance the paper. Hold it until the feed mechanism pulls the paper through to the front of the printer. Turn the paper roll so that any loose turns are wound snugly against the roll and close the door. 5. More paper may now be fed through by pressing the paper feed button. Method A Method B Figure 10.4-2. Paper Roll Replacement 10-3 10.4.3 Ribbon Cartridge Replacement Tear off any paper emerging from the printer. To open the printer door, refer to paragraph 8.4. 1. Carefully press the door and bracket in vertically opposite directions until the latch is released. Do not pull the door and bracket apart without first releasing the catch. See figure 10.2 item (3). Swing the chassis back leaving the door fully open. This will expose the printer mechanism and ink ribbon cartridge. Refer to figure 10.4-3.
(1) Press in on the end of the ink ribbon cartridge marked PUSH, and carefully remove the used cartridge. Push replacement cartridge in place, ensuring that the paper lies between the ribbon and the steel printer plate, and the ribbon cartridge spindle is correctly seated over the printer ribbon drive shaft. Ensure that the ribbon is taut and parallel to the paper. If necessary, tighten the ribbon by turning the faceted disk (2) clockwise using your fingernail or small blade screwdriver. Make sure the paper protrudes through the front of the printer mechanism. Ensure that the paper will pass clearly through the guide channel and past the tear bar before snapping the bracket shut against the back of the door. Turn the paper roll by hand so any loose turns are wound snugly against the roll. Close the door and check that the paper flows freely, using the paper feed button. Figure 10.4-3. Ribbon Cartridge Replacement 10.4.4 Printer Supply Ordering Information Paper Roll Size:
The inside diameter of the spool hole is either .50 inch or .438 inch Paper width is 2.25 inches Paper roll outside diameter is 1.90 inches Note: Remove paper from a roll with diameter greater than 2.00 inches until the diameter is less than 2.00 inches. Paper roll supplies are listed in Table 10.4.4-1, while ribbon cartridge supplies are listed in Table 10.4.4-2. 10-4 Table 10.4.4-1 Paper Roll Suppliers Item Paper Roll Distributors Catalog/Stock No. Manufacturer and Part No. 1 2 3 McWhorters 1-800-426-1368 Office Depot 1-800-519-7222 TFT, Inc. 408-727-7272 Ext. 300/205 408-988-3988 FAX SPR 01121 523-423 1130-0103 EAS Sparco 01121 Offic Depot OD225150AD Able Systems A160-PR The paper width is 2-1/4 The inside diameter of the spool hole is .438 or .500 The TFT/Able paper roll outside diameter is 1.9 If the paper roll diameter is greater than 2, remove paper until the diameter is less than 2. Table 8.4.4-2 Ribbon Cartridge Suppliers Item 1 2 3 4 5 Ribbon Cartridge Distributors McWhorters Tel. 1-800-426-1368 Office Depot Tel. 1-800-519-7222 Weigh-Tronix Tel. 707-527-5555 Omni Print Tel. 714-457-0229 TFT, Inc. Tel. 408-727-7272 Ext. 300 Fax 408-988-3988 Catalog/Stock No. Manufacturer and Part No. ESP H00CR-BB 506-501 223320029 ERC-09 1130-0102 EAS NU-KOTE Part No. NUKPM 267 NU-KOTE Part No. NUKPM 267 EPSON Part No. ERC-09 EPSON Part No. ERC-09 EPSON Part No. ERC-09 10.5 DIAGNOSTICS AND REPAIR Since most EAS DECODER users have limited diagnostic and repair facilities, the most practical maintenance philosophy is repair by circuit card replacement. It is recommended that spare circuit cards be on hand, together with an alternative plan for operation while repairs are being made. Some general (and very important) observations on repair:
1. The EAS DECODER series of equipment uses static sensitive components. ESD (Electrostatic Discharge) precautions must therefore be observed during repairs. This is extremely important. 2. The EAS DECODER breaks down into subassemblies located on individual circuit cards and, in general, card level replacement is best maintenance philosophy. 3. The Theory Of Operation Section (Section VIX) is helpful in understanding how the EAS DECODER equipment functions and will help you with diagnostics, as it covers the jobs performed by each major component and subsystem. 10-5 10.6 TROUBLESHOOTING Most of the EAS DECODER functions can be troubleshot by performing an Encoder (TFT Model 911) to Decoder
(TFT Model 911D) test as described below. Press the following keys from TFT Model 911: PASSWORD, 9, 1, 1, WEEKLY TEST, READY, SEND HDR. The On-Air Relay LED will light and the LCD will display "SENDING HEADER" first, then "SEND EOM". The Printer will print the EAS message if it is installed. Press the SEND EOM key. The LCD will display "SENDING EOM" first, then the EAS message. Press the MSG WAITING key then CANCEL. The EAS DECODER will return to the Ready Banner (Banner) Mode. 10.7 TFT CUSTOMER SERVICE DEPARTMENT TFT emergency service is available 24 hours a day. Please call us if you need assistance with any TFT products. TFT, Inc. 2243 Ringwood Avenue San Jose, CA 95131 Telephone: (408) 943-9323, Fax: (408) 432-9218 10-6 APPENDIX A ENGINEERING DRAWINGS FIG. TITLE DWG NO. REV. 1. EAS Decoder System Block Diagram...................... 6600-2840 2. Main Board Schematic......................................... 6601-4060 3. Main Board Assembly ......................................... 6608-4060 4. 5. Encoder Key Board Schematic ............................ 6601-4027 Encoder Key Board Assembly............................. 6608-4027 6. Decoder Key Board Schematic ............................ 6601-4028 7. Decoder Key Board Assembly............................. 6608-4028 8. Digital Voice Recorder Board Schematic ............ 6601-4016 9. Digital Voice Recorder Board Assembly ............ 6608-4016 A A A C C C C E E J102 CH. 1 Audio Audio I/F CH. 2 Audio J102 Audio I/F Sheet 1 of Schematics
(6601-4030) J112 Not Used 8 Sheet 2 of Schematics
(6601-4030) RS232 J103 RS232 I/F 60Hz Clock Reference J108 Printer/Speaker Inhibit J109 Encoder Key Bd J128 Decoder Common Key Bd J126 Audio Switch 4 CNTL Audio Switch 4 CNTL Audio Switch 4 CNTL EPROM
(256KB) SRAM
(64KB) R. Time Clock FPGA DSP W.D. Timer CNTL Output Ports Sheet 3 of Schematics
(6601-4030) J111 Voice Recorder J100 SPKR J101 XLR Audio Output Speaker Driver Audio Driver VOL CNTL 3 CNTL Codec
(X2) CNTL S U B P S D Relay Driver Relay Driver J106 On-Air Relay J107 Alert Relay RS485 I/F J105 Remote S/C Board Printer I/F J121 Printer J113 4-port COM Expdr J127 LCD Displays MAIN BOARD EASDecoder SYSTEM BLOCK DIAGRAM Doc # 6600 -2841 Rev. A File: 1000-00193 APPENDIX B PARTS LISTS TITLE DWG NO. REV. Main PCB...................................................................... 6608-4060 Encoder PCB................................................................. 6608-4027 Decoder PCB................................................................. 6608-4028 Voice Recorder PCB..................................................... 6608-4016 COM Port Expander PCB............................................. 6608-4061 A C C E A APPENDIX C FIPS CODE LISTINGS How to Use the FIPS Code Listings The Header of an EAS Alert Message contains a location code which designates the geographical area affected by the alert. The location code contains 6-digits formatted PSSCCC, where:
P indicates the county subdivision. SS indicates the state. CCC indicates the county. The P digit of the location code has a range of 0 to 9 and specifies a portion of a county:
The SSCCC portion of the location code designates the State and County affected by the Alert message. It uses the Federal Information Processing System (FIPS) code as described by the U.S. Department of Commerce in National Institute of Standards and Technology publication 772. Each state is assigned a 2-digit code (SS). Each county is assigned a 3-digit code (CCC). A CCC code of 000 refers to an entire State or Territory. State FIPS codes (SS) are 2-digit ascending numbers 01 to 56 assigned to an alphabetically ordered list of states as shown in Table C-1. 6 = East 7 = Southwest 8 = South 9 = Southeast 0 = all or an unspecified portion of a county 1 = Northwest, 2 = North 3 = Northeast, 4 = West 5 = Central Table C-1. State FIPS Codes State FIPS State FIPS AL AK AZ AR CA CO CT DE FL GA 01 02 04 05 06 08 09 10 12 13 HI ID IL IN IA KS KY LA ME MD 15 16 17 18 19 20 21 22 23 24 State MA MI MN MS MO MT NE NV NH NJ FIPS 25 26 27 28 29 30 31 32 33 34 State NM NY NC ND OH OK OR PA RI SC FIPS State FIPS 35 36 37 38 39 40 41 42 44 45 SD TN TX UT VT VA WA WV WS WY 46 47 48 49 50 51 53 54 55 56 District of Columbia - 11 C-1 County FIPS codes are 3-digit ascending numbers 000 to 999 assigned to an alphabetically ordered lis t of counties within a designated state as shown in Part A. U.S. Territories FIPS codes are 2-digit ascending numbers from 60 to 78 assigned to an alphabetically ordered list of Territories as shown in Table C-2. Table C-2. U.S. Territories FIPS Codes Territory FIPS Code Territory FIPS Code Territory FIPS Code American Samoa Federated States of Micronesia Guam 60 64 66 Marshall Islands Northern Mariana Islands Palau 68 69 70 Puerto Rico U.S. Minor Outlying Islands Virgin Islands 72 74 78 FIPS CODE LISTINGS CONTENTS Part A - U. S. State/County FIPS Codes State Page Massachusetts ................................................................................................ Alabama .................................................................................................................................................................................................C-4 Michigan ................................................................................................................................ Alaska C-4 Arizona C-4 Minnesota ................................................................................................................................ Mississippi ................................................................................................................................ Arkansas ................................................................................................................................................................................................C-4 California ................................................................................................................................................................................................C-5 Page Colorado .................................................................................................................................................................................................C-5 Missouri ................................................................................................................................ State Connecticut ...........................................................................................................................................................................................C-5 Montana ................................................................................................................................ Delaware .................................................................................................................................................................................................C-5 Nebraska ................................................................................................................................ District of Columbia .............................................................................................................................................................................C-5 Nevada C-13 FloridaC-6 Georgia C-6 HawaiiC-7 IdahoC-7 Illinois C-7 IndianaC-8 Iowa .C-8 KansasC-9 New Hampshire ................................................................................................ New Jersey ................................................................................................................................ New Mexico ................................................................................................ New York ................................................................................................................................ North Carolina ................................................................................................ North Dakota ................................................................................................ Ohio C-15 Oklahoma ................................................................................................................................ Kentucky ................................................................................................................................................................................................C-9 Oregon C-15 Louisiana .............................................................................................................................................................................................C-10 Pennsylvania ................................................................................................ Maine C-10 Rhode Island ................................................................................................ Maryland .............................................................................................................................................................................................C-10 South Carolina ................................................................................................ C-2 South Dakota ......................................................................................................................................................................................C-16 Washington ................................................................................................................................ Tennessee ............................................................................................................................................................................................C-17 West Virginia ................................................................................................ Texas C-17 Utah C-18 Wisconsin ................................................................................................................................ Wyoming ................................................................................................................................ Vermont ...............................................................................................................................................................................................C-18 Virginia C-19 Part B - U. S. Territories FIPS Codes Territory Page American Samoa .................................................................................................................................................................................C-23 Territory PalauC-23 Page Federated States of Micronesia ........................................................................................................................................................C-23 Puerto Rico................................................................................................................................ GuamC-23 U.S. Minor Outlying Islands................................................................................................ Marshall Islands..................................................................................................................................................................................C-23 Virgin Islands................................................................................................ North Mariana Islands .......................................................................................................................................................................C-23 Territory Offshore (Marine Area ).C23 Page Part C Offshore (Marine Area) FIPS Codes C-5 AUTAUGA BALDWIN BARBOUR BIBB BLOUNT BULLOCK BUTLER CALHOUN CHAMBERS CHEROKEE CHILTON CHOCTAW CLARKE CLAY CLEBURNE COFFEE COLBERT ALEUTIANS EAST ALEUTIANS WEST ANCHORAGE BETHEL BRISTOL BAY DENALI DILLINGHAM 01001 01003 01005 01007 01009 01011 01013 01015 01017 01019 01021 01023 01025 01027 01029 01031 01033 02013 02016 02020 02050 02060 02068 02070 CONECUH COOSA COVINGTON CRENSHAW CULLMAN DALE DALLAS DE KALB ELMORE ESCAMBIA ETOWAH FAYETTE FRANKLIN GENEVA GREENE HALE HENRY ALABAMA 01035 01037 01039 01041 01043 01045 01047 01049 01051 01053 01055 01057 01059 01061 01063 01065 01067 HOUSTON JACKSON JEFFERSON LAMAR LAUDERDALE LAWRENCE LEE LIMESTONE LOWNDES MACON MADISON MARENGO MARION MARSHALL MOBILE MONROE MONTGOMERY ALASKA FAIRBANKS NORTH STAR HAINES JUNEAU KENAI PENINSULA KETCHIKAN GATEWAY KODIAK ISLAND LAKE AND PENINSULA 02090 02100 02110 02122 02130 02150 02164 MATANUSKA-
SUSITNA NOME NORTH SLOPE NORTHWEST ARCTIC PRINCE OF WALES-
OUTER KETCHIKAN SITKA SKAGWAY-
HOONAH-ANGOON 01069 01071 01073 01075 01077 01079 01081 01083 01085 01087 01089 01091 01093 01095 01097 01099 01101 02170 02180 02185 02188 02201 02220 02232 MORGAN PERRY PICKENS PIKE RANDOLPH RUSSELL SAINT CLAIR SHELBY SUMTER TALLADEGA TALLAPOOSA TUSCALOOSA WALKER WASHINGTON WILCOX WINSTON SOUTHEAST FAIRBANKS VALDEZ-
CORDOVA WADE HAMPTON WRANGELL-
PETERSBURG YAKUTAT YUKON-KOYUKUK 01103 01105 01107 01109 01111 01113 01115 01117 01119 01121 01123 01125 01127 01129 01131 01133 02240 02261 02270 02280 02282 02290 04015 04017 04019 04021 SANTA CRUZ YAVAPAI YUMA 04023 04025 04027 APACHE COCHISE COCONINO GILA ARKANSAS ASHLEY BAXTER BENTON BOONE BRADLEY CALHOUN CARROLL CHICOT CLARK CLAY CLEBURNE CLEVELAND COLUMBIA CONWAY CRAIGHEAD CRAWFORD CRITTENDEN CROSS 04001 04003 04005 04007 GRAHAM GREENLEE LA PAZ MARICOPA 05001 05003 05005 05007 05009 05011 05013 05015 05017 05019 05021 05023 05025 05027 05029 05031 05033 05035 05037 DALLAS DESHA DREW FAULKNER FRANKLIN FULTON GARLAND GRANT GREENE HEMPSTEAD HOT SPRING HOWARD INDEPENDENCE IZARD JACKSON JEFFERSON JOHNSON LAFAYETTE LAWRENCE ARIZONA 04009 MOHAVE 04011 NAVAJO 04012 04013 PIMA PINAL ARKANSAS 05039 05041 05043 05045 05047 05049 05051 05053 05055 05057 05059 05061 05063 05065 05067 05069 05071 05073 05075 LEE LINCOLN LITTLE RIVER LOGAN LONOKE MADISON MARION MILLER MISSISSIPPI MONROE MONTGOMERY NEVADA NEWTON OUACHITA PERRY PHILLIPS PIKE POINSETT POLK 05077 05079 05081 05083 05085 05087 05089 05091 05093 05095 05097 05099 05101 05103 05105 05107 05109 05111 05113 POPE PRAIRIE PULASKI RANDOLPH SAINT FRANCIS SALINE SCOTT SEARCY SEBASTIAN SEVIER SHARP STONE UNION VAN BUREN WASHINGTON WHITE WOODRUFF YELL 05115 05117 05119 05121 05123 05125 05127 05129 05131 05133 05135 05137 05139 05141 05143 05145 05147 05149 C-4 ALAMEDA ALPINE AMADOR BUTTE CALAVERAS COLUSA CONTRA COSTA DEL NORTE EL DORADO FRESNO GLENN HUMBOLDT IMPERIAL INYO KERN ADAMS ALAMOSA ARAPAHOE ARCHULETA BACA BENT BOULDER BROOMFIELD CHAFFEE CHEYENNE CLEAR CREEK CONEJOS COSTILLA CROWLEY CUSTER DELTA DENVER 06001 06003 06005 06007 06009 06011 06013 06015 06017 06019 06021 06023 06025 06027 06029 08001 08003 08005 08007 08009 08011 08013 008014 08015 08017 08019 08021 08023 08025 08027 08029 08031 KINGS LAKE LASSEN LOS ANGELES MADERA MARIN MARIPOSA MENDOCINO MERCED MODOC MONO MONTEREY NAPA NEVADA ORANGE DOLORES DOUGLAS EAGLE ELBERT EL PASO FREMONT GARFIELD GILPIN GRAND GUNNISON HINSDALE HUERFANO JACKSON JEFFERSON KIOWA KIT CARSON LAKE CALIFORNIA PLACER 06031 PLUMAS 06033 RIVERSIDE 06035 06037 SACRAMENTO SAN BENITO 06039 SAN BERNARDINO 06041 SAN DIEGO 06043 SAN FRANCISCO 06045 06047 SAN JOAQUIN SAN LUIS OBISPO 06049 SAN MATEO 06051 SANTA BARBARA 06053 SANTA CLARA 06055 06057 SANTA CRUZ SHASTA 06059 COLORADO 08033 08035 08037 08039 08041 08043 08045 08047 08049 08051 08053 08055 08057 08059 08061 08063 08065 LA PLATA LARIMER LAS ANIMAS LINCOLN LOGAN MESA MINERAL MOFFAT MONTEZUMA MONTROSE MORGAN OTERO OURAY PARK PHILLIPS PITKIN PROWERS 06061 06063 06065 06067 06069 06071 06073 06075 06077 06079 06081 06083 06085 06087 06089 08067 08069 08071 08073 08075 08077 08079 08081 08083 08085 08087 08089 08091 08093 08095 08097 08099 SIERRA SISKIYOU SOLANO SONOMA STANISLAUS SUTTER TEHAMA TRINITY TULARE TUOLUMNE VENTURA YOLO YUBA PUEBLO RIO BLANCO RIO GRANDE ROUTT SAGUACHE SAN JUAN SAN MIGUEL SEDGWICK SUMMIT TELLER WASHINGTON WELD YUMA FAIRFIELD HARTFORD 09001 09003 LITCHFIELD MIDDLESEX CONNECTICUT 09005 09007 NEW HAVEN NEW LONDON 09009 09011 TOLLAND WINDHAM KENT 10001 NEW CASTLE DISTRICT OF COLUMBIA DELAWARE 10003 SUSSEX 10005 ALACHUA BAKER BAY BRADFORD BREVARD BROWARD CALHOUN CHARLOTTE 12001 12003 12005 12007 12009 12011 12013 12015 FLAGLER FRANKLIN GADSDEN GILCHRIST GLADES GULF HAMILTON HARDEE FLORIDA LAKE LEE LEON LEW LIBERTY MADISON MANATEE MARION 12035 12037 12039 12041 12043 12045 12047 12049 12069 12071 12073 12075 12077 12079 12081 12083 PINELLAS POLK PUTNAM SAINT JOHNS SAINT LUCIE SANTA ROSA SARASOTA SEMINOLE C-5 06091 06093 06095 06097 06099 06101 06103 06105 06107 06109 06111 06113 061l5 08101 08103 08105 08107 08109 08111 08113 08115 08117 08119 08121 08123 08125 09013 09015 11001 12103 12105 12107 12109 12111 12113 12115 12117 CITRUS CLAY COLLIER COLUMBIA DADE DE SOTO DIXIE DWAL ESCAMBIA APPLING ATKINSON BACON BAKER BALDWIN BANKS BARROW BARTOW BEN HILL BERRIEN BIBB BLECKLEY BRANTLEY BROOKS BRYAN BULLOCH BURKE BUTTS CALHOUN CAMDEN CANDLER CARROLL CATOOSA CHARLTON CHATHAM CHATTAHOOCHEE 12017 12019 12021 12023 12025 12027 12029 12031 12033 13001 13003 13005 13007 13009 13011 13013 13015 13017 13019 13021 13023 13025 13027 13029 13031 13033 13035 13037 13039 13043 13045 13047 13049 13051 13053 HENDRY HERNANDO HIGHLANDS HILLSBOROUGH HOLMES INDIAN RIVER JACKSON JEFFERSON LAFAYETTE DADE DAWSON DECATUR DE KALB DODGE DOOLY DOUGHERTY DOUGLAS EARLY ECHOLS EFFINGHAM ELBERT EMANUEL EVANS FANN1N FAYETTE FLOYD FORSYTH FRANKLIN FULTON GILMER GLASCOCK GLYNN GORDON GRADY GREENE 12051 12053 12055 12057 12059 12061 12063 12065 12067 MARTIN MIAMI-DADE MONROE NASSAU OKALOOSA OKEECHOBEE ORANGE OSCEOLA PALM BEACH PASCO GEORGIA 13083 13085 13087 13089 13091 13093 13095 13097 13099 13101 13103 13105 13107 13109 13111 13113 13115 13117 13119 13121 13123 13125 13127 13129 13131 13133 JEFFERSON JENKINS JOHNSON JONES LAMAR LANIER LAURENS LEE LIBERTY LINCOLN LONG LOWNDES LUMPKIN MCDUFFIE MCINTOSH MACON MADISON MARION MERIWETHER MILLER MITCHELL MONROE MONTGOMERY MORGAN MURRAY MUSCOGEE 12085 012086 12087 12089 12091 12093 12095 12097 12099 12101 SUMTER SUWANNEE TAYLOR UNION VOLUSIA WAKULLA WALTON WASHINGTON 13163 13165 13167 13169 13171 13173 13175 13177 13179 13181 13183 13185 13187 13189 13191 13193 13195 13197 13199 13201 13205 13207 13209 13211 13213 13215 RICHMOND ROCKDALE SCHLEY SCREVEN SEMINOLE SPALDING STEPHENS STEWART SUMTER TALBOT TALIAFERRO TATTNALL TAYLOR TELFAIR TERRELL THOMAS TIFT TOOMBS TOWNS TREUTLEN TROUP TURNER TWIGGS UNION UPSON WALKER 12119 12121 12123 12125 12127 12129 12131 12133 13245 13247 13249 13251 13253 13255 13257 13259 13261 13263 13265 13267 13269 13271 13273 13275 13277 13279 13281 13283 13285 13287 13289 13291 13293 13295 C-19 CHATTOOGA CHEROKEE CLARKE CLAY CLAYTON CLINCH COBB COFFEE COLQUITT COLUMBUS COOK COWETA CRAWFORD CRISP 13055 13057 13059 13061 13063 13065 13067 13069 13071 13073 13075 13077 13079 13081 GWINNETT HABERSHAM HALL HANCOCK HARALSON HARRIS HART HEARD HENRY HOUSTON IRWIN JACKSON JASPER JEFF DAVIS HAWAII HONOLULU 15001 15003 KALAWAO ADA ADAMS BANNOCK BEAR LAKE BENEWAH BINGHAM BLAINE BOISE BONNER BONNEVILLE BOUNDARY ADAMS ALEXANDER BOND BOONE BROWN BUREAU CALHOUN CARROLL CASS CHAMPAIGN CHRISTIAN CLARK CLAY CLINTON COLES COOK CRAWFORD CUMBERLAND DE KALB DE WITT DOUGLAS DU PAGE EDGAR EDWARDS EFFINGHAM FAYETTE 16001 16003 16005 16007 16009 16011 16013 16015 16017 16019 16021 17001 17003 17005 17007 17009 17011 17013 17015 17017 17019 17021 17023 17025 17027 17029 17031 17033 17035 17037 17039 17041 17043 17045 17047 17049 17051 BUTTE CAMAS CANYON CARIBOU CASSIA CLARK CLEARWATER CUSTER ELMORE FRANKLIN FREMONT FORD FRANKLIN FULTON GALLATIN GREENE GRUNDY HAMILTON HANCOCK HARDIN HENDERSON HENRY IROQUOIS JACKSON JASPER JEFFERSON JERSEY JO DAVIESS JOHNSON KANE KANKAKEE KENDALL KNOX LAKE LA SALLE LAWRENCE LEE GEORGIA (Continued) 13135 13137 13139 13141 13143 13145 13147 13149 13151 13153 13155 13157 13159 13161 NEWTON OCONEE OGLETHORPE PAULDING PEACH PICKENS PIERCE PIKE POLK PULASKI PUTNAM QUITMAN RABUN RANDOLPH HAWAII 15005 KAUAI IDAHO 16023 16025 16027 16029 16031 16033 16035 16037 16039 16041 16043 GEM GOODING IDAHO JEFFERSON JEROME KOOTENAI LATAH LEMHI LEWIS LINCOLN MADISON ILLINOIS 17053 17055 17057 17059 17061 17063 17065 17067 17069 17071 17073 17075 17077 17079 17081 17083 17085 17087 17089 17091 17093 17095 LIVINGSTON LOGAN MCDONOUGH MCHENRY MCLEAN MACON MACOUPIN MADISON MARION MARSHALL MASON MASSAC MENARD MERCER MONROE MONTGOMERY MORGAN MOULTRIE OGLE PEORIA PERRY PIATT ILLINOIS (Continued) 17097 17099 17101 17103 PIKE POPE PULASKI PUTNAM 13217 13219 13221 13223 13225 13227 13229 13231 13233 13235 13237 13239 13241 13243 WALTON WARE WARREN WASHINGTON WAYNE WEBSTER WHEELER WHITE WHITFIELD WILCOX WILKES WlLKlNSON WORTH 15007 MAUI 16045 16047 16049 16051 16053 16055 16057 16059 16061 16063 16065 17105 17107 17109 17111 17113 17115 17117 17119 17121 17123 17125 17127 17129 17131 17133 17135 17137 17139 17141 17143 17145 17147 17149 17151 17153 17155 MINIDOKA NEZ PERCE ONEIDA OWYHEE PAYETTE POWER SHOSHONE TETON TWIN FALLS VALLEY WASHINGTON RANDOLPH RICHLAND ROCK ISLAND SAINT CLAIR SALINE SANGAMON SCHUYLER SCOTT SHELBY STARK STEPHENSON TAZEWELL UNION VERMILION WABASH WARREN WASHINGTON WAYNE WHITE WHITESIDE WILL WILLLEMSON WINNEBAGO WOODFORD 13297 13299 13301 13303 13305 13307 13309 13311 13313 13315 13317 13319 13321 15009 16067 16069 16071 16073 16075 16077 16079 16081 16083 16085 16087 17157 17159 17161 17163 17165 17167 17169 17171 17173 17175 17177 17179 17181 17183 17185 17187 17189 17191 17193 17195 17197 17199 17201 17203 C-7 ADAMS ALLEN BARTHOLOMEW BENTON BLACKFORD BOONE BROWN CARROLL CASS CLARK CLAY CLINTON CRAWFORD DAVIESS DEARBORN DECATUR DE KALB DELAWARE DUBOIS ELKHART FAYETTE FLOYD FOUNTAIN ADAIR ADAMS ALLAMAKEE APPANOOSE AUDUBON BENTON BLACK HAWK BOONE BREMER BUCHANAN BUENA VISTA BUTLER CALHOUN CARROLL CASS CEDAR CERRO GORDO CHEROKEE CHICKASAW CLARKE CLAY CLAYTON CLINTON CRAWFORD DALLAS ALLEN ANDERSON ATCHISON BARBER BARTON BOURBON 18001 18003 18005 18007 18009 18011 18013 18015 18017 18019 18021 18023 18025 18027 18029 18031 18033 18035 18037 18039 18041 18043 18045 19001 19003 19005 19007 19009 19011 19013 19015 19017 19019 19021 19023 19025 19027 19029 19031 19033 19035 19037 19039 19041 19043 19045 19047 19049 20001 20003 20005 20007 20009 20011 FRANKLIN FULTON GIBSON GRANT GREENE HAMILTON HANCOCK HARRISON HENDRICKS HENRY HOWARD HUNTINGTON JACKSON JASPER JAY JEFFERSON JENNINGS JOHNSON KNOX KOSCIUSKO LAGRANGE LAKE LA PORTE DAVIS DECATUR DELAWARE DES MOINES DICKINSON DUBUQUE EMMET FAYETTE FLOYD FRANKLIN FREMONT GREENE GRUNDY GUTHRIE HAMILTON HANCOCK HARDIN HARRISON HENRY HOWARD HUMBOLDT IDA IOWA JACKSON JASPER FINNEY FORD FRANKLIN GEARY GOVE GRAHAM INDIANA 18047 18049 18051 18053 18055 18057 18059 18061 18063 18065 18067 18069 18071 18073 18075 18077 18079 18081 18083 18085 18087 18089 18091 LAWRENCE MADISON MARION MARSHALL MARTIN MIAMI MONROE MONTGOMERY MORGAN NEWTON NOBLE OHIO ORANGE OWEN PARKE PERRY PIKE PORTER POSEY PULASKI PUTNAM RANDOLPH RIPLEY IOWA 19051 19053 19055 19057 19059 19061 19063 19065 19067 19069 19071 19073 19075 19077 19079 19081 19083 19085 19087 19089 19091 19093 19095 19097 19099 JEFFERSON JOHNSON JONES KEOKUK KOSSUTH LEE LINN LOUISA LUCAS LYON MADISON MAHASKA MARION MARSHALL MILLS MITCHELL MONONA MONROE MONTGOMERY MUSCATINE O'BRIEN OSCEOLA PAGE PALO ALTO PLYMOUTH KANSAS LOGAN LYON MCPHERSON MARION MARSHALL MEADE 20055 20057 20059 20061 20063 20065 18093 18095 18097 18099 18101 18103 18105 18107 18109 18111 18113 18115 18117 18119 18121 18123 18125 18127 18129 18131 18133 18135 18137 19101 19103 19105 19107 19109 19111 19113 19115 19117 19119 19121 19123 19125 19127 19129 19131 19133 19135 19137 19139 19141 19143 19145 19147 19149 20109 20111 20113 20115 20117 20119 18139 18141 18143 18145 18147 18149 18151 18153 18155 18157 18159 18161 18163 18165 18167 18169 18171 18173 18175 18177 18179 18181 18183 19151 19153 19155 19157 19159 19161 19163 19165 19167 19169 19171 19173 19175 19177 19179 19181 19183 19185 19187 19189 19191 19193 19195 19197 20163 20165 20167 20169 20171 20173 RUSH SAINT JOSEPH SCOTT SHELBY SPENCER STARKE STEUBEN SULLIVAN SWITZERLAND TIPPECANOE TIPTON UNION VANDERBURGH VERMILLION VIGO WABASH WARREN WARRICK WASHINGTON WAYNE WELLS WHITE WHITLEY POCAHONTAS POLK POTTAWATTAMIE POWESHIEK RINGGOLD SAC SCOTT SHELBY SIOUX STORY TAMA TAYLOR UNION VAN BUREN WAPELLO WARREN WASHINGTON WAYNE WEBSTER WINNEBAGO WINNESHIEK WOODBURY WORTH WRIGHT ROOKS RUSH RUSSELL SALINE SCOTT SEDGWICK C-8 BROWN BUTLER CHASE CHAUTAUQUA CHEROKEE CHEYENNE CLARK CLAY CLOUD COFFEY COMANCHE COWLEY CRAWFORD DECATUR DICKINSON DONIPHAN DOUGLAS EDWARDS ELK ELLIS ELLSWORTH ADAIR ALLEN ANDERSON BALLARD BARREN BATH BELL BOONE BOURBON BOYD BOYLE BRACKEN BREATHITT BRECKINRIDGE BULLITT BUTLER CALDWELL CALLOWAY CAMPBELL CARLISLE CARROLL CARTER CASEY CHRISTIAN CLARK CLAY CLINTON CRITTENDEN CUMBERLAND DAVIESS ACADIA ALLEN ASCENSION ASSUMPTION AVOYELLES BEAUREGARD BIENVILLE 20013 20015 20017 20019 20021 20023 20025 20027 20029 20031 20033 20035 20037 20039 20041 20043 20045 20047 20049 20051 20053 21001 21003 21005 21007 21009 21011 21013 21015 21017 21019 21021 21023 21025 21027 21029 21031 21033 21035 21037 21039 21041 21043 21045 21047 21049 21051 21053 21055 21057 21059 22001 22003 22005 22007 22009 22011 22013 GRANT GRAY GREELEY GREENWOOD HAMILTON HARPER HARVEY HASKELL HOWEMAN JACKSON JEFFERSON JEWELL JOHNSON KEARNY KINGMAN KIOWA LABETTE LANE LEAVENWORTH LINCOLN LINN EDMONSON ELLIOTT ESTILL FAYETTE FLEMING FLOYD FRANKLIN FULTON GALLATIN GARRARD GRANT GRAVES GRAYSON GREEN GREENUP HANCOCK HARDIN HARLAN HARRISON HART HENDERSON HENRY HICKMAN HOPKINS JACKSON JEFFERSON JESSAMINE JOHNSON KENTON KNOTT 20067 20069 20071 20073 20075 20077 20079 20081 20083 20085 20087 20089 20091 20093 20095 20097 20099 20101 20103 20105 20107 MlAMI MITCHELL MONTGOMERY MORRIS MORTON NEMAHA NEOSHO NESS NORTON OSAGE OSBORNE OTTAWA PAWNEE PHILLIPS POTTAWATOMIE PRATT RAWLINS RENO REPUBLIC RICE RILEY KENTUCKY KNOX 21061 LARVE 21063 LAUREL 21065 21067 LAWRENCE LEE 21069 LESLIE 21071 LETCHER 21073 LEWIS 21075 21077 LINCOLN LIVINGSTON 21079 LOGAN 21081 LYON 21083 MCCRACKEN 21085 21087 MCCREARY MCLEAN 21089 MADISON 21091 MAGOFFIN 21093 MARION 21095 21097 MARSHALL MARTIN 21099 MASON 21101 MEADE 21103 MENIFEE 21105 21107 MERCER METCALFE 21109 21111 MONROE KENTUCKY (Continued) 21113 21115 21117 21119 MONTGOMERY MORGAN MUHLENBERG NELSON EAST BATON ROUGE EAST CARROLL EAST FELICIANA EVANGELINE FRANKLIN GRANT IBERIA LOUISIANA MADISON MOREHOUSE NATCHITOCHES ORLEANS OUACHITA PLAQUEMINES POINTE COUPEE 22033 22035 22037 22039 22041 22043 22045 20121 20123 20125 20127 20129 20131 20133 20135 20137 20139 20141 20143 20145 20147 20149 20151 20153 20155 20157 20159 20161 21121 21123 21125 21127 21129 21131 21133 21135 21137 21139 21141 21143 21145 21147 21149 21151 21153 21155 21157 21159 21161 21163 21165 21167 21169 21171 21173 21175 21177 21179 22065 22067 22069 22071 22073 22075 22077 SEWARD SHAWNEE SHERIDAN SHERMAN SMITH STAFFORD STANTON STEVENS SUMNER THOMAS TREGO WABAUNSEE WALLACE WASHINGTON WICHITA WILSON WOODSON WYANDOTTE NICHOLAS OHIO OLDHAM OWEN OWSLEY PENDLETON PERRY PIKE POWELL PULASKI ROBERTSON ROCKCASTLE ROWAN RUSSELL SCOTT SHELBY SIMPSON SPENCER TAYLOR TODD TRIGG TRIMBLE UNION WARREN WASHINGTON WAYNE WEBSTER WHITLEY WOLFE WOODFORD SAINT LANDRY SAINT MARTIN SAINT MARY SAINT TAMMANY TANGIPAHOA TENSAS TERREBONNE 20175 20177 20179 20181 20183 20185 20187 20189 20191 20193 20195 20197 20199 20201 20203 20205 20207 20209 21181 21183 21185 21187 21189 21191 21193 21195 21197 21199 21201 21203 21205 21207 21209 21211 21213 21215 21217 21219 21221 21223 21225 21227 21229 21231 21233 21235 21237 21239 22097 22099 22101 22103 22105 22107 22109 C-9 22047 22049 22051 22053 22055 22057 22059 22061 22063 23009 23011 23013 23015 BOSSER CADDO CALCASIEU CALDWELL CAMERON CATAHOULA CLAIBORNE CONCORDIA DE SOTO 22015 22017 22019 22021 22023 22025 22027 22029 22031 IBERVILLE JACKSON JEFFERSON JEFFERSON DAVIS LAFAYETTE LAFOURCHE LA SA LLE LINCOLN LIVINGSTON ANDROSCOGGIN AROOSTOOK CUMBERLAND FRANKLIN 23001 23003 23005 23007 HANCOCK KENNEBEC KNOX LINCOLN ALLEGANY ANNE ARUNDEL BALTIMORE BALTIMORE CITY CALVERT CAROLINE 24001 24003 24005 24510 24009 24011 CARROLL CECIL CHARLES DORCHESTER FREDERICK GARRETT RAPIDES RED RIVER RICHLAND SABINE SAINT BERNARD SAINT CHARLES SA1NT HELENA SA1NT JAMES ST JOHN THE BAPTIST 22079 22081 22083 22085 22087 22089 22091 22093 22095 UNION VERMILION VERNON WASHINGTON WEBSTER WEST BATON ROUGE WEST CARROLL WEST FELICIANA WINN MAINE OXFORD PENOBSCOT PISCATAQUIS SAGADAHOC MARYLAND HARFORD HOWARD KENT MONTGOMERY PRINCE GEORGE'S QUEEN ANNE'S 24013 24015 24017 24019 24021 24023 23017 23019 23021 23023 SOMERSET WALDO WASHINGTON YORK 24025 24027 24029 24031 24033 24035 SAINT MARY'S SOMERSET TALBOT WASHINGTON WICOMICO WORCESTER BARNSTABLE BERKSHIRE BRISTOL DUKES 25001 25003 25005 25007 ESSEX FRANKLIN HAMPDEN HAMPSHIRE MASSACHUSETTS 25009 25011 25013 25015 MIDDLESEX NANTUCKET NORFOLK PLYMOUTH 25017 25019 25021 25023 SUFFOLK WORCESTER ALCONA ALGER ALLEGAN ALPENA ANTItIM ARENAC BARAGA BARRY BAY BENZIE BERRIEN BRANCH CALHOUN CASS CHARLEVOIX CHEBOYGAN CHIPPEWA CLARE CLINTON CRAWFORD DELTA AITKIN ANOKA BECKER BELTRAMI BENTON BIG STONE BLUE EARTH DICKINSON EATON EMMET GENESEE GLADWIN GOGEBIC GRAND TRAVERSE GRATIOT HILLSDALE HOUGHTON MICHIGAN 26043 26045 26047 26049 26051 26053 26055 26057 26059 26061 LAKE LAPEER LEELANAU LENAWEE LIVINGSTON LUCE MACKINAC MACOMB MANISTEE MARQUETTE MICHIGAN (Continued) HURON INGHAM IONIA IOSCO IRON ISABELLA JACKSON KALAMAZOO KALKASKA KENT KEEWEENAW FILLMORE FREEBORN GOODHUE GRANT HENNEPIN HOUSTON HUBBARD 26063 26065 26067 26069 26071 26073 26075 26077 26079 26081 26083 MASON MECOSTA MENOMINEE MIDLAND MISSAUKEE MONROE MONTCALM MONTMORENCY MUSKEGON NEWAYGO OAKLAND MINNESOTA 27045 27047 27049 27051 27053 27055 27057 MARSHALL MARTIN MEEKER MILLE LACS MORRISON MOWER MURRAY 26001 26003 26005 26007 26009 26011 26013 26015 26017 26019 26021 26023 26025 26027 26029 26031 26033 26035 26037 26039 26041 27001 27003 27005 27007 27009 27011 27013 26085 26087 26089 26091 26093 26095 26097 26099 26101 26103 26105 26107 26109 26111 26113 26115 26117 26119 26121 26123 26125 27089 27091 27093 27095 27097 27099 27101 OCEANA OGEMAW ONTONAGON OSCEOLA OSCODA OTSEGO OTTAWA PRESQUE ISLE ROSCOMMON SAGINAW SAINT CLAIR SAINT JOSEPH SANILAC SCHOOLCRAFT SHIAWASSEE TUSCOLA VAN BUREN WASHTENAW WAYNE WEXFORD ROCK ROSEAU SAINT LOUIS SCOTT SHERBURNE SIBLEY STEARNS 22111 22113 22115 22117 22119 22121 22123 22125 22127 23025 23027 23029 23031 24037 24039 24041 24043 24045 24047 25025 25027 26127 26129 26131 26133 26135 26137 26139 26141 26143 26145 26147 26149 26151 26153 26155 26157 26159 26161 26163 26165 27133 27135 27137 27139 27141 27143 27145 C-9 BROWN CARLTON CARVER CASS CHIPPEWA CHISAGO CLAY CLEARWATER COOK COTTONWOOD CROW WING DAKOTA DODGE DOUGLAS FARIBAULT ADAMS ALCORN AMITE ATTALA BENTON BOLIVAR CALHOUN CARROLL CHICKASAW CHOCTAW CLAIBORNE CLARKE CLAY COAHOMA COPIAH COVINGTON DE SOTO FORREST FRANKLIN 27015 27017 27019 27021 27023 27025 27027 27029 27031 27033 27035 27037 27039 27041 27043 28001 28003 28005 28007 28009 28011 28013 28015 28017 28019 28021 28023 28025 28027 28029 28031 28033 28035 28037 ISANTI ITASCA JACKSON KANABEC KANDIYOHI KITTSON KOOCHICHING LAC QUI PARLE LAKE LAKE OF THE WOODS LE SUEUR LINCOLN LYON MCLEOD MAHNOMEN 27059 27061 27063 27065 27067 27069 27071 27073 27075 27077 27079 27081 27083 27085 27087 NICOLLET NOBLES NORMAN OLMSTED OTTER TAIL PENNINGTON PINE PIPESTONE POLK POPE RAMSEY RED LAKE REDWOOD RENVILLE RICE GRENADA HANCOCK HARRISON HINDS HOLMES HUMPHREYS ISSAQUENA ITAWAMBA JACKSON JASPER JEFFERSON JEFFERSON DAVIS JONES KEMPER LAFAYETTE LAMAR LAUDERDALE LAWRENCE LEAKE MISSISSIPPI 28043 28045 28047 28049 28051 28053 28055 28057 28059 28061 28063 28065 28067 28069 28071 28073 28075 28077 28079 LINCOLN LOWNDES MADISON MARION MARSHALL MONROE MONTGOMERY NESHOBA NEWTON NOXUBEE OKTIBBEHA PANOLA PEARL RIVER PERRY PIKE PONTOTOC PRENTISS QUITMAN RANKIN 27103 27105 27107 27109 27111 27113 27115 27117 27119 27121 27123 27125 27127 27129 27131 28085 28087 28089 28091 28093 28095 28097 28099 28101 28103 28105 28107 28109 28111 28113 28115 28117 28119 28121 STEELE STEVENS SWIFT TODD TRAVERSE WABASHA WADENA WASECA WASHINGTON WATONWAN WILKIN WINONA WRIGHT YELLOW MEDICINE SIMPSON SMITH STONE SUNFLOWER TALLAHATCHIE TATE TIPPAH TISHOMINGO TUNICA UNION WALTHALL WARREN WASHINGTON WAYNE WEBSTER WILKINSON WINSTON YALOBUSHA YAZOO GEORGE GREENE 28039 28041 LEE LEFLORE 28081 28083 SCOTT SHARKEY 28123 28125 MISSISSIPPI (Continued) ADAIR ANDREW ATCHISON AUDRAIN BARRY BARTON BATES BENTON BOLLINGER BOONE BUCHANAN BUTLER CALDWELL CALLAWAY CAMDEN CAPE GIRARDEAU CARROLL CARTER CASS CEDAR CHARITON CHRISTIAN CLARK 29001 29003 29005 29007 29009 29011 29013 29015 29017 29019 29021 29023 29025 29027 29029 29031 29033 29035 29037 29039 29041 29043 29045 DALLAS DAVIESS DE KALB DENT DOUGLAS DUNKLIN FRANKLIN GASCONADE GENTRY GREENE GRUNDY HARRISON HENRY HICKORY HOLT HOWARD HOWELL IRON JACKSON JASPER JEFFERSON JOHNSON KNOX MISSOURI 29059 29061 29063 29065 29067 29069 29071 29073 29075 29077 29079 29081 29083 29085 29087 29089 29091 29093 29095 29097 29099 29101 29103 LIVINGSTON MCDONALD MACON MADISON MARIES MARION MERCER MILLER MISSISSIPPI MONITEAU MONROE MONTGOMERY MORGAN NEW MADRID NEWTON NODAWAY OREGON OSAGE OZARK PEMISCOT PERRY PETTIS PHELPS 29117 29119 29121 29123 29125 29127 29129 29131 29133 29135 29137 29139 29141 29143 29145 29147 29149 29151 29153 29155 29157 29159 29161 RANDOLPH RAY REYNOLDS RIPLEY SAINT CHARLES SAINT CLAIR SAINT GENEVIEVE SAINT FRANCOIS SAINT LOUIS SALINE SCHUYLER SCOTLAND SCOTT SHANNON SHELBY STODDARD STONE SULLIVAN TANEY TEXAS VERNON WARREN WASHINGTON 27147 27149 27151 27153 27155 27157 27159 27161 27163 27165 27167 27169 27171 27173 28127 28129 28131 28133 28135 28137 28139 28141 28143 28145 28147 28149 28151 28153 28155 28157 28159 28161 28163 29175 29177 29179 29181 29183 29185 29186 29187 29189 29195 29197 29199 29201 29203 29205 29207 29209 29211 29213 29215 29217 29219 29221 C-9 CLAY CLINTON COLE COOPER CRAWFORD DADE BEAVERHEAD BIG HORN BLAINE BROADWATER CARBON CARTER CASCADE CHOUTEAU CUSTER DANIELS DAWSON DEER LODGE FALLON FERGUS FLATHEAD 29047 29049 290S1 29053 29055 29057 30001 30003 30005 30007 30009 30011 30013 30015 30017 30019 30021 30023 30025 30027 30029 LACLEDE LAFAYETTE LAWRENCE LEWIS LINCOLN LINN 29105 29107 29109 29111 29113 29115 PIKE PLATTE POLK PULASKI PUTNAM RALLS GALLATIN GARFELD GLACIER GOLDEN VALLEY GRANITE HILL JEFFERSON JUDITH BASIN LAKE LEWIS AND CLARK LIBERTY LINCOLN MCCONE MADISON MEAGHER MONTANA 30031 30033 30035 30037 30039 30041 30043 30045 30047 30049 30051 30053 30055 30057 30059 MINERAL MISSOULA MUSSELSHELL PARK PETROLEUM PHILLIPS PONDERA POWDER RIVER POWELL PRAIRIE RAVALLI RICHLAND ROOSEVELT ROSEBUD SANDERS 29163 29165 29167 29169 29171 29173 30061 30063 30065 30067 30069 30071 30073 30075 30077 30079 30081 30083 30085 30087 30089 WAYNE WEBSTER WORTH WRIGHT SAINT LOUIS CITY SHERIDAN SILVER BOW STILLWATER SWEET GRASS TETON TOOLE TREASURE VALLEY WHEATLAND WIBAUX YELLOWSTONE YSTONE NATL PARK 29223 29225 29227 29229 29510 30091 30093 30095 30097 30099 30101 30103 30105 30107 30109 30111 30113 C-9 ADAMS ANTELOPE ARTHUR BANNER BLAINE BOONE BOX BUTTE BOYD BROWN BUFFALO BURT BUTLER CASS CEDAR CHASE CHERRY CHEYENNE CLAY COLFAX CUMING CUSTER DAKOTA DAWES DAWSON CHURCHILL CLARK DOUGLAS ELKO ESMERALDA 31001 31003 31005 31007 31009 31011 31013 31015 31017 31019 31021 31023 31025 31027 31029 31031 31033 31035 31037 31039 31041 31043 31045 31047 32001 32003 32005 32007 32009 DEUEL DIXON DODGE DOUGLAS DUNDY FILLMORE FRANKLIN FRONTIER FURNAS GAGE GARDEN GARFIELD GOSPER GRANT GREELEY HALL HAMILTON HARLAN HAYES HITCHCOCK HOLT HOOKER HOWARD JEFFERSON EUREKA HUMBOLDT LANDER LINCOLN LYON NEBRASKA 31049 31051 31053 31055 31057 31059 31061 31063 31065 31067 31069 31071 31073 31075 31077 31079 31081 31083 31085 31087 31089 31091 31093 31095 JOHNSON KEARNEY KEITH KEYA PAHA KIMBALL KNOX LANCASTER LINCOLN LOGAN LOUP MCPHERSON MADISON MERRICK MORRILL NANCE NEMAHA NUCKOLLS OTOE PAWNEE PERKINS PHELPS PIERCE PLATTE POLK NEVADA 32011 32013 32015 32017 32019 MINERAL NYE PERSHING STOREY WASHOE 31097 31099 31101 31103 31105 31107 31109 31111 31113 31115 31117 31119 31121 31123 31125 31127 31129 31131 31133 31135 31137 31139 31141 31143 32021 32023 32027 32029 32031 RED WILLOW RICHARDSON ROCK SALINE SARPY SAUNDERS SCOTTS BLUFF SEWARD SHERIDAN SHERMAN SIOUX STANTON THAYER THOMAS THURSTON VALLEY WASHINGTON WAYNE WEBSTER WHEELER YORK WHITE PINE CARSON CITY BELKNAP CARROLL CHESHIRE 33001 33003 33005 COOS GRAFTON HILLSBOROUGH 33007 33009 33011 MERRIMACK ROCKINGHAM STRAFFORD 33013 33015 33017 SULLIVAN NEW HAMPSHIRE ATLANTIC BERGEN BURLINGTON CAMDEN CAPE MAY CUMBERLAND BERNALILLO CATRON CHAVES CIBOLA COLFAX CURRY DE BACA DONA ANA 34001 34003 34005 34007 34009 34011 35001 35003 35005 35006 35007 35009 35011 35013 ESSEX GLOUCESTER HUDSON HUNTERDON MERCER MIDDLESEX EDDY GRANT GUADALUPE HARDING HIDALGO LEA LINCOLN LOS ALAMOS NEW JERSEY 34013 34015 34017 34019 34021 34023 MONMOUTH MORRIS OCEAN PASSAIC SALEM SOMERSET NEW MEXICO LUNA 35015 MCKINLEY 35017 MORA 35019 35021 OTERO QUAY 35023 RIO ARRIBA 35025 ROOSEVELT 35027 35028 SANDOVAL 34025 34027 34029 34031 34033 34035 35029 35031 35033 35035 35037 35039 35041 35043 SUSSEX UNION WARREN SAN JUAN SAN MIGUEL SANTA FE SIERRA SOCORRO TAOS TORRANCE UNION VALENCIA 35061 NEW MEXICO (Continued) 31145 31147 31149 31151 31153 31155 31157 31159 31161 31163 31165 31167 31169 31171 31173 31175 31177 31179 31181 31183 31185 32033 32510 33019 34037 34039 34041 35045 35047 35049 35051 35053 35055 35057 35059 C-9 ALBANY ALLEGANY BRONX BROOME CATTARAUGUS CAYUGA CHAUTAQUA CHEMUNG CHENANGO CLINTON COLUMBIA CORTLAND DELAWARE DUTCHESS ERIE ESSEX ALAMANCE ALEXANDER ALLEGHANY ANSON ASHE AVERY BEAUFORT BERTE BLADEN BRUNSWICK BUNCOMBE BURKE CABARRUS CALDWELL CAMDEN CARTERET CASWELL CATAWBA CHATHAM CHEROKEE CHOWAN CLAY CLEVELAND COLUMBUS CRAVEN ADAMS BARNES BENSON BILLINGS BOTTINEAU BOWMAN BURKE BURLEIGH OLIVER PEMBINA PIERCE RAMSEY RANSOM RENVILLE FRANKLIN FULTON GENESEE GREENE HAMILTON HERKIMER JEFFERSON KINGS LEWIS LlVINGSTON MADISON MONROE MONTGOMERY NASSAU NEW YORK NIAGARA CUMBERLAND CURRITUCK DARE DAVIDSON DAVIE DUPLIN DURHAM EDGECOMBE FORSYTH FRANKLIN GASTON GATES GRAHAM GRANVILLE GREENE GUILFORD HALIFAX HARNETT HAYWOOD HENDERSON HERTFORD HOKE HYDE IREDELL JACKSON NEW YORK 36033 36035 36037 36039 36041 36043 36045 36047 36049 36051 36053 36055 36057 36059 36061 36063 ONEIDA ONONDAGA ONTARIO ORANGE ORLEANS OSWEGO OTSEGO PUTNAM QUEENS RENSSELAER RICHMOND ROCKLAND ST. LAWRENCE SARATOGA SCHENECTADY SCHOHARIE NORTH CAROLINA JOHNSTON JONES LEE LENOIR LINCOLN MCDOWELL MACON MADISON MARTIN MECKLENBURG MITCHELL MONTGOMERY MOORE NASH NEW HANOVER NORTHAMPTON ONSLOW ORANGE PAMLICO PASQUOTANK PENDER PERQUIMANS PERSON PITT POLK 37051 37053 37055 37057 37059 37061 37063 37065 37067 37069 37071 37073 37075 37077 37079 37081 37083 37085 37087 37089 37091 37093 37095 37097 37099 CASS CAVALIER DICKEY DIVIDE DUNN EDDY EMMONS FOSTER RICHLAND ROLETTE SARGENT SHERIDAN SIOUX SLOPE NORTH DAKOTA 38017 38019 38021 38023 38025 38027 38029 38031 GOLDEN VALLEY GRAND FORKS GRANT GRIGGS HETTINGER KIDDER LA MOURE LOGAN NORTH DAKOTA (Continued) 38077 38079 38081 38083 38085 38087 STARK STEELE STUTSMAN TOWNER TRAILL WALSH 36001 36003 36005 36007 36009 36011 36013 36015 36017 36019 36021 36023 36025 36027 36029 36031 37001 37003 37005 37007 37009 37011 37013 37015 37017 37019 37021 37023 37025 37027 37029 37031 37033 37035 37037 37039 37041 37043 37045 37047 37049 38001 38003 38005 38007 38009 38011 38013 38015 38065 38067 38069 38071 38073 38075 36065 36067 36069 36071 36073 36075 36077 36079 36081 36083 36085 36087 36089 36091 36093 36095 37101 37103 37105 37107 37109 37111 37113 37115 37117 37119 37121 37123 37125 37127 37129 37131 37133 37135 37137 37139 37141 37143 37145 37147 37149 38033 38035 38037 38039 38041 38043 38045 38047 38089 38091 38093 38095 38097 38099 SCHUYLER SENECA STEUBEN SUFFOLK SULLIVAN TIOGA TOMPKINS ULSTER WARREN WASHINGTON WAYNE WESTCHESTER WYOMING YATES RANDOLPH RICHMOND ROBESON ROCKINGHAM ROWAN RUTHERFORD SAMPSON SCOTLAND STANLY STOKES SURRY SWAIN TRANSYLVANIA TYRRELL UNION VANCE WAKE WARREN WASHINGTON WATAUGA WAYNE WILKES WILSON YADKIN YANCEY MCHENRY MCINTOSH MCKENZIE MCLEAN MERCER MORTON MOUNTRAIL NELSON WARD WELLS WILLIAMS 36097 36099 36101 36103 36105 36107 36109 36111 36113 36115 36117 36119 36121 36123 37151 37153 37155 37157 37159 37161 37163 37165 37167 37169 37171 37173 37175 37177 37179 37181 37183 37185 37187 37189 37191 37193 37195 37197 37199 38049 38051 38053 38055 38057 38059 38061 38063 38101 38103 38105 C-9 ADAMS ALLEN ASHLAND ASHTABULA ATHENS AUGLAIZE BELMONT BROWN BUTLER CARROLL CHAMPAIGN CLARK CLERMONT CLINTON COLUMBIANA COSHOCTON CRAWFORD CUYAHOGA DARKE DEFIANCE DELAWARE ERIE ADAIR ALFALFA ATOKA BEAVER BECKHAM BLAINE BRYAN CADDO CANADIAN CARTER CHEROKEE CHOCTAW CIMARRON CLEVELAND COAL COMANCHE COTTON CRAIG CREEK CUSTER 39001 39003 39005 39007 39009 39011 39013 39015 39017 39019 39021 39023 39025 39027 39029 39031 39033 39035 39037 39039 39041 39043 40001 40003 40005 40007 40009 40011 40013 40015 40017 40019 40021 40023 40025 40027 40029 40031 40033 40035 40037 40039 FAIRFIELD FAYETTE FRANKLIN FULTON GALLIA GEAUGA GREENE GUERNSEY HAMILTON HANCOCK HARDIN HARRISON HENRY HIGHLAND HOCKING HOLMES HURON JACKSON JEFFERSON KNOX LAKE LAWRENCE DELAWARE DEWEY ELLIS GARFIELD GARVIN GRADY GRANT GREER HARMON HARPER HASKELL HUGHES JACKSON JEFFERSON JOHNSTON KAY KINGFISHER KIOWA LATIMER LE FLORE OHIO 39045 39047 39049 39051 39053 39055 39057 39059 39061 39063 39065 39067 39069 39071 39073 39075 39077 39079 39081 39083 39085 39087 LICKING LOGAN LORAIN LUCAS MADISON MAHONING MARION MEDINA MEIGS MERCER MIAMI MONROE MONTGOMERY MORGAN MORROW MUSKINGUM NOBL E OTTAWA PAULDING PERRY PICKAWAY PIKE OKLAHOMA 40041 40043 40045 40047 40049 40051 40053 40055 40057 40059 40061 40063 40065 40067 40069 40071 40073 40075 40077 40079 LINCOLN LOGAN LOVE MCCLAIN MCCURTAIN MCINTOSH MAJOR MARSHALL MAYES MURRAY MUSKOGEE NOBLE NOWATA OKFUSKEE OKLAHOMA OKMULGEE OSAGE OTTAWA PAWNEE PAYNE BAKER BENTON 41001 41003 CLACKAMAS CLATSOP DESCHUTES DOUGLAS GILLIAM GRANT HARNEY HOOD RIVER JACKSON 41017 41019 41021 41023 41025 41027 41029 JEFFERSON JOSEPHINE KLAMATH LAKE LANE LINCOLN LINN OREGON 41005 41007 COLUMBIA COOS OREGON (Continued) MALHEUR MARION MORROW MULTNOMAH POLK SHERMAN TILLAMOOK 41031 41033 41035 41037 41039 41041 41043 PENNSYLVANIA 39089 39091 39093 39095 39097 39099 39101 39103 39105 39107 39109 39111 39113 39115 39117 39119 39121 39123 39125 39127 39129 39131 40081 40083 40085 40087 40089 40091 40093 40095 40097 40099 40101 40103 40105 40107 40109 40111 40113 40115 40117 40119 PORTAGE PREBLE PUTNAM RICHLAND ROSS SANDUSKY SCIOTO SENECA SHELBY STARK SUMMIT TRUMBULL TUSCARAWAS UN1ON VAN WERT VINTON WARREN WASHINGTON WAYNE WILLIAMS WOOD WYANDOT PITTSBURG PONTOTOC POTTAWATOMIE PUSHMATAHA ROGER MILLS ROGERS SEMINOLE SEQUOYAH STEPHENS TEXAS TILLMAN TULSA WAGONER WASHINGTON WASHITA WOODS WOODWARD 41009 41011 CROOK CURRY 41045 41047 41049 41051 41053 41055 41057 UMATILLA UNION WALLOWA WASCO WASHINGTON WHEELER YAMHILL ADAMS ALLEGHENY 42001 42003 CLINTON COLUMBIA 42035 42037 LACKAWANNA LANCASTER 42069 42071 PIKE POTTER 39133 39135 39137 39139 39141 39143 39145 39147 39149 39151 39153 39155 39157 39159 39161 39163 39165 39167 39169 39171 39173 39175 40121 40123 40125 40127 40129 40131 40133 40135 40137 40139 40141 40143 40145 40147 40149 40151 40153 41013 41015 41059 41061 41063 41065 41067 41069 41071 42103 42105 C-9 ARMSTRONG BEAVER BEDFORD BERKS BLAIR BRADFORD BUCKS BUTLER CAMBRIA CAMERON CARBON CENTRE CHESTER CLARION CLEARFELD 42005 42007 42009 42011 42013 42015 42017 42019 42021 42023 42025 42027 42029 42031 42033 CRAWFORD CUMBERLAND DAUPHIN DELAWARE ELK ERIE FAYETTE FOREST FRANKLIN FULTON GREENE HUNTINGDON INDIANA JEFFERSON JUNIATA 42039 42041 42043 42045 42047 42049 42051 42053 42055 42057 42059 42061 42063 42065 42067 LAWRENCE LEBANON LEHIGH LUZERNE LYCOMING MCKEAN MERCER MIFFLIN MONROE MONTGOMERY MONTOUR NORTHAMPTON NORTHUMBERLAND PERRY PHILADELPHIA 42073 42075 42077 42079 42081 42083 42085 42087 42089 42091 42093 42095 42097 42099 42101 SCHUYLKILL SNYDER SOMERSET SULLIVAN SUSQUEHANNA TIOGA UNION VENANGO WARREN WASHINGTON WAYNE WESTMORELAND WYOMING YORK BRISTOL KENT 44001 44003 NEWPORT PROVIDENCE 44005 44007 WASHlNGTON 44009 RHODE ISLAND ABBEVILLE AIKEN ALLENDALE ANDERSON BAMBERG BARNWELL BEAUFORT BERKELEY CALHOUN CHARLESTON CHEROKEE CHESTER AURORA BEADLE BENNETT BON HOMME BROOKINGS BROWN BRULE BUFFALO BUTTE CAMPBELL LYMAN MCCOOK MCPHERSON MARSHALL MEADE MELLETTE MINER ANDERSON BEDFORD BENTON BLEDSOE BLOUNT BRADLEY 45001 45003 45005 45007 45009 45011 45013 45015 45017 45019 45021 45023 46003 46005 46007 46009 46011 46013 46015 46017 46019 46021 46085 46087 46089 46091 46093 46095 46097 47001 47003 47005 47007 47009 47011 CHESTERFELD CLARENDON COLLETON DARLINGTON DILLON DORCHESTE R EDGEFIELD FAIRFELD FLORENCE GEORGETOWN GREENVILLE GREENWOOD CHARLES MIX CLARK CLAY CORSON CUSTER DAVISON DAY DEUEL DEWEY DOUGLAS MINNEHAHA MOODY PENNINGTON PERKINS POTTER ROBERTS SANBORN FENTRESS FRANKLIN GIBSON GILES GRAINGER GREENE SOUTH CAROLINA HAMPTON HORRY JASPER KERSHAW LANCASTER LAURENS LEE LEXINGTON MCCORMICK MARION MARLBORO NEWBERRY 45025 45027 45029 45031 45033 45035 45037 45039 45041 45043 45045 45047 SOUTH DAKOTA EDMUNDS FALL RIVER FAULK GRANT GREGORY HAAKON HAMLIN HAND HANSON HARDING 46023 46025 46027 46031 46033 46035 46037 46039 46041 46043 SOUTH DAKOTA (Continued) 46099 46101 46103 46105 46107 46109 46111 SHANNON SPINK STANLEY SULLY TODD TRIPP TURNER TENNESSEE 47049 47051 47053 47055 47057 47059 LAUDERDALE LAWRENCE LEWIS LINCOLN LOUDON MCMINN 45049 45051 45053 45055 45057 45059 45061 45063 45065 45067 45069 45071 46045 46047 46049 46051 46053 46055 46057 46059 46061 46063 46113 46115 46117 46119 46121 46123 46125 47097 47099 47101 47103 47105 47107 OCONEE ORANGEBURG PICKENS RICHLAND SALUDA SPARTANBURG SUMTER UNION WILLIAMSBURG YORK HUGHES HUTCHINSON HYDE JACKSON IERAULD JONES KINGSBURY LAKE LAWRENCE LINCOLN UNION WALWORTH YANKTON ZIEBACH ROANE ROBERTSON RUTHERFORD SCOTT SEQUATCHIE SEVIER 42107 42109 42111 42113 42115 42117 42119 42121 42123 42125 42127 42129 42131 42133 45073 45075 45077 45079 45081 45083 45085 45087 45089 45091 46065 46067 46069 46071 46073 46075 46077 46079 46081 46083 46127 46129 46135 46137 47145 47147 47149 47151 47153 47155 C-9 CAMPBELL CANNON CARROLL CARTER CHEATHAM CHESTER CLAIBORNE CLAY COCKE COFFEE CROCKETT CUMBERLAND DAVIDSON DECATUR DE KALB DICKSON DYER FAYETTE ANDERSON ANDREWS ANGELINA ARANSAS ARCHER ARMSTRONG ATASCOSA AUSTIN BANDERA BASTROP BAYLOR BEE BELL BEXAR BLANCO BORDEN BOSQUE BOWE BRAZORIA BRAZOS BREWSTER GOLIAD GONZALES GRAY GRAYSON GREGG GRIMES GUADALUPE HALE HALL HAMILTON HANSFORD HARDEMAN HARDIN HARRIS HARRISON HARTLEY HASKELL HAYS HEMPHILL HENDERSON HIDALGO HILL 47013 47015 47017 47019 47021 47023 47025 47027 47029 47031 47033 47035 47037 47039 47041 47043 47045 47047 48001 48003 48005 48007 48009 48011 48013 48015 48019 48021 48023 48025 48027 48029 48031 48033 48035 48037 48039 48041 48043 48175 48177 48179 48181 48183 48185 48187 48189 48191 48193 48195 48197 48199 48201 48203 48205 48207 48209 48211 48213 48215 48217 GRUNDY HAMBLEN HAMILTON HANCOCK HARDEMAN HARDIN HAWKINS HAYWOOD HENDERSON HENRY HICKMAN HOUSTON HUMPHREYS JACKSON JEFFERSON JOHNSON KNOX LAKE BRISCOE BROOKS BROWN BURLESON BURNET CALDWELL CALHOUN CALLAHAN CAMERON CAMP CARSON CASS CASTRO CHAMBERS CHEROKEE CHILDRESS CLAY COCHRAN COKE COLEMAN COLLIN KENDALL KENEDY KENT KERR KIMBLE KING KINNEY KLEBERG KNOX LAMAR LAMB LAMPASAS LA SALLE LAVACA LEE LEON LIBERTY LIMESTONE LIPSCOMB LIVE OAK LLANO LOVING 47061 47063 47065 47067 47069 47071 47073 47075 47077 47079 47081 47083 47085 47087 47089 47091 47093 47095 MCNAIRY MACON MADISON MARION MARSHALL MAURY MEIGS MONROE MONTGOMERY MOORE MORGAN OBION OVERTON PERRY PICKETT POLK PUTNAM RHEA TEXAS 48045 48047 48049 48051 48053 48055 48057 48059 48061 48063 48065 48067 48069 48071 48073 48075 48077 48079 48081 48083 48085 COLLINGSWORTH COLORADO COMAL COMANCHE CONCHO COOKE COTTLE CRANE CROCKETT CROSBY CULBERSON DALLAM DALLAS DAWSON DEAF SMITH DELTA DENTON DE WITT DICKENS DIMMIT DONLEY TEXAS (Continued) 48259 48261 48263 48265 48267 48269 48271 48273 48275 48277 48279 48281 48283 48285 48287 48289 48291 48293 48295 48297 48299 48301 MORRIS MOTLEY NACOGDOCHES NAVARRO NEWTON NOLAN NUECES OCHILTREE OLDHAM ORANGE PALO PINTO PANOLA PARKER PARMER PECOS POLK POTTER PRESIDIO RAINS RANDALL REAGAN REAL 47109 47111 47113 47115 47117 47119 47121 47123 47125 47127 47129 47131 47133 47135 47137 47139 47141 47143 48087 48089 48091 48093 48095 48097 48101 48103 48105 48107 48109 48111 48113 48115 48117 48119 48121 48123 48125 48127 48129 48343 48345 48347 48349 48351 48353 48355 48357 48359 48361 48363 48365 48367 48369 48371 48373 48375 48377 48379 48381 48383 48385 SHELBY SMITH STEWART SULLIVAN SUMNER TIPTON TROUSDALE UNICOI UNION VAN BUREN WARREN WASHINGTON WAYNE WEAKLEY WHITE WILLIAMSON WILSON DUVAL EASTLAND ECTOR EDWARDS ELLIS EL PASO ERATH FALLS FANNIN FAYETTE FISHER FLOYD FOARD FORT BEND FRANKLIN FREESTONE FRIO GALVESTON GARZA GILLESPE GLASSCOCK STARR STEPHENS STERLING STONEWALL SUTTON SWISHER TARRANT TAYLOR TERRELL TERRY THROCKMORTON TITUS TOM GREEN TRAVIS TRINITY TYLER UPSHUR UPTON UVALDE VAL VERDE VAN ZANDT VICTORIA 47157 47159 47161 47163 47165 47167 47169 47171 47173 47175 47177 47179 47181 47183 47185 47187 47189 48131 48133 48135 48137 48139 48141 48143 48145 48147 48149 48151 48153 48155 48157 48159 48161 48163 48167 48169 48171 48173 48427 48429 48431 48433 48435 48437 48439 48441 48443 48445 48447 48449 48451 48453 48455 48457 48459 48461 48463 48465 48467 48469 C-9 HOCKLEY HOOD HOPKINS HOUSTON HOWARD HUDSPETH HUNT HUTCHINSON IRION JACK JACKSON JASPER JEFF DAVIS JEFFERSON JIM HOGG JIM WELLS JOHNSON JONES KARNES KAUFMAN BEAVER BOX ELDER CACHE CARBON DAGGETT DAVIS DUCHESNE EMERY 48219 48221 48223 48225 48227 48229 48231 48233 48235 48237 48239 48241 48243 48245 48247 48249 48251 48253 48255 48257 49001 49003 49005 49007 49009 49011 49013 49015 LUBBOCK LYNN MCCULLOCH MCLENNAN MCMULLEN MADISON MARION MARTIN MASON MATAGORDA MAVERICK MEDINA MENARD MIDLAND MILAM MILLS MITCHELL MONTAGUE MONTGOMERY MOORE GARFIELD GRAND IRON JUAB KANE MILLARD MORGAN PIUTE RED RIVER REEVES REFUGIO ROBERTS ROBERTSON ROCKWALL RUNNELS RUSK SABINE SAN AUGUSTINE SAN JACINTO SAN PATRICIO SAN SABA SCHLEICHER SCURRY SHACKELFORD SHELBY SHERMAN SMITH SOMERVELL 48303 48305 48307 48309 48311 48313 48315 48317 48319 48321 48323 48325 48327 48329 48331 48333 48335 48337 48339 48341 UTAH 49017 49019 49021 49023 49025 49027 49029 49031 RICH SALT LAKE SAN JUAN SANPETE SEVER SUMMIT TOOELE UINTAH 48387 48389 48391 48393 48395 48397 48399 48401 48403 48405 48407 48409 48411 48413 48415 48417 48419 48421 48423 48425 49033 49035 49037 49039 49041 49043 49045 49047 WALKER WALLER WARD WASHINGTON WEBB WHARTON WHEELER WICHITA WILBARGER WILLACY WILLIAMSON WILSON WINKLER WISE WOOD YOAKUM YOUNG ZAPATA ZAVALA UTAH WASATCH WASHINGTON WAYNE WEBER 48471 48473 48475 48477 48479 48481 48483 48485 48487 48489 48491 48493 48495 48497 48499 48501 48503 48505 48507 49049 49051 49053 49055 49057 ADDISON BENNINGTON 50001 50003 CALEDONIA CHITTENDEN ORANGE ORLEANS 50017 50019 RUTLAND WASHlNGTON VERMONT ESSEX 50005 FRANKLIN 50007 VERMONT (Continued) WINDHAM WINDSOR 50021 50023 ACCOMACK ALBEMARLE ALEXANDRIA CITY ALLEGHANY AMELIA AMEERST APPOMATTOX ARLINGTON AUGUSTA BATH BEDFORD BEDFORD CITY BLAND BOTETOURT BRISTOL CITY 51001 51003 51510 51005 51007 51009 51011 51013 51015 51017 51019 51515 51021 51023 51520 FAUQUIER FLOYD FLUVANNA FRANKLIN FREDERICK GILES GLOUCESTER GOOCHLAND GRAYSON GREENE GREENSVILLE HALIFAX HANOVER HENRICO HENRY VIRGINIA 51061 51063 51065 51067 51069 51071 51073 51075 51077 51079 51081 51083 51085 51087 51089 MIDDLESEX MONTGOMERY NELSON NEW KENT NORTHAMPTON NORTHUMBERLAND NOTTOWAY ORANGE PAGE PATRICK PITTSYLVANIA POWHATAN PRINCE EDWARD PRINCE GEORGE PRINCE WILLIAM BRUNSWICK 51025 HIGHLAND 51091 PULASKI BUCHANAN BUCKINGHAM BUENA VISTA CITY CAMPBELL 51027 51029 51530 51031 ISLE OF WIGHT JAMES CITY KING AND QUEEN KING GEORGE 51093 51095 51097 51099 RAPPAHANNOCK RICHMOND ROANOKE ROCKBRIDGE 50009 50011 GRAND ISLE LAMOILLE 50013 50015 50025 50027 51119 51121 51125 51127 51131 51133 51135 51137 51139 51141 51143 51145 51147 51149 51153 51155 51157 51159 51161 51163 MANASSAS CITY NEWPORT NEWS CITY NORFOLK CITY NORTON CITY PETERSBURG CITY SUSSEX TAZEWELL WARREN WASHINGTON WESTMORELAND WISE WYTHE YORK CHESAPEAKE CITY CLIFTON FORGE CITY COLONIAL HEIGHTS CITY COVINGTON CITY DANVILLE CITY EMPORIA CITY FAIRFAX CITY 51683 51700 51710 51720 51730 51183 51185 51187 51191 51193 51195 51197 51199 51550 51560 51570 51580 51590 51595 51600 C-9 CAROLINE CARROLL CHARLES CITY CHARLOTTE CHARLOTTESVILLE CITY CHESTERFIELD CLARKE CRAIG CULPEPER CUMBERLAND DICKENSON DINWIDDE ESSEX FAIRFAX ADAMS ASOTIN BENTON CHELAN CLALLAM CLARK COLUMBIA COWLITZ DOUGLAS FERRY 51033 51035 51036 51037 51540 KING WILLIAM LANCASTER LEE LOUDOUN LOUISA 51101 51103 51105 51107 51109 ROCKINGHAM RUSSELL SCOTT SHENANDOAH SMYTH 51165 51167 51169 51171 51173 FALLS CHURCH CITY FRANKLIN CITY FREDERICKSBURG CITY GALAX CITY HAMPTON CITY 51041 LUNENBURG 51111 SOUTHAMPTON 51175 51043 51045 51047 51049 51051 51053 51057 51059 53001 53003 53005 53007 53009 53011 53013 53015 53017 53019 MADISON MATLEWS MECKLENBURG POQUOSON CITY PORTSMOUTH CITY 51113 51115 51117 51735 51740 SPOTSYLVANIA STAFFORD SURRY RICHMOND CITY ROANOKE CITY 51177 51179 51181 51760 51770 RADFORD CITY MANASSAS PARK CITY 51750 51685 SALEM CITY SOUTH BOSTON CITY 51775 51780 MARTINSVILLE CITY 51690 STAUNTON CITY FRANKLIN GARFIELD GRANT GRAYS HARBOR ISLAND JEFFERSON KING KITSAP KITTITAS KLICKITAT WASHINGTON LEWIS 53021 53023 LINCOLN MASON 53025 OKANOGAN 53027 PACIFIC 53029 53031 PEND OREILLE PIERCE 53033 SAN JUAN 53035 SKAGIT 53037 53039 SKAMANIA 51790 53041 53043 53045 53047 53049 53051 53053 53055 53057 53059 HARRISONBURG CITY HOPEWELL CITY LEXINGTON CITY LYNCHBURG CITY SUFFOLK CITY VIRGINIA BEACH CITY WAYNESBORO CITY WILLIAMSBURG CITY WINCHESTER CITY SNOHOMISH SPOKANE STEVENS THURSTON WAHKIAKUM WALLA WALLA WHATCOM WHITMAN YAKIMA 51610 51620 51630 51640 51650 51660 51670 51678 51680 51800 51810 51820 51830 51840 53061 53063 53065 53067 53069 53071 53073 53075 53077 C-9 BARBOUR BERKELEY BOONE BRAXTON BROOKE CABELL CALHOUN CLAY DODDRIDGE FAYETTE GILMER GRANT GREENBRIER HAMPSHIRE ADAMS ASHLAND BARRON BAYFELD BROWN BUFFALO BURNETT CALUMET CHIPPEWA CLARK COLUMBIA CRAWFORD DANE DODGE DOOR DOUGLAS DUNN EAU CLAIRE ALBANY BIG HORN CAMPBELL CARBON CONVERSE CROOK 54001 54003 54005 54007 54009 54011 54013 54015 54017 54019 54021 54023 54025 54027 55001 55003 55005 55007 55009 55011 55013 55015 55017 55019 55021 55023 55025 55027 55029 55031 55033 55035 56001 56003 56005 56007 56009 56011 HANCOCK HARDY HARRISON JACKSON JEFFERSON KANAWHA LEWIS LINCOLN LOGAN MCDOWELL MARION MARSHALL MASON MERCER FLORENCE FOND DU LAC FOREST GRANT GREEN GREEN LAKE IOWA IRON JACKSON JEFFERSON JUNEAU KENOSHA KEWAUNEE LA CROSSE LAFAYETTE LANGLADE LINCOLN MANITOWOC FREMONT GOSHEN HOT SPRINGS JOHNSON LARAMIE LlNCOLN WEST VIRGINIA MINERAL MINGO MONONGALIA MONROE MORGAN NICHOLAS OHIO PENDLETON PLEASANTS POCAHONTAS PRESTON PUTNAM RALEIGH RANDOLPH 54029 54031 54033 54035 54037 54039 54041 54043 54045 54047 54049 54051 54053 54055 WISCONSIN 55037 55039 55041 55043 55045 55047 55049 55051 55053 55055 55057 55059 55061 55063 55065 55067 55069 55071 MARATHON MARINETTE MARQUETTE MENOMINEE MILWAUKEE MONROE OCONTO ONEIDA OUTAGAMIE OZAUKEE PEPIN PIERCE POLK PORTAGE PRICE RACINE RICHLAND ROCK WYOMING 56013 56015 56017 56019 56021 56023 NATRONA NIOBRARA PARK PLAITE SHERIDAN SUBLETTE 54057 54059 54061 54063 54065 54067 54069 54071 54073 54075 54077 54079 54081 54083 55073 55075 55077 55078 55079 55081 55083 55085 55087 55089 55091 55093 55095 55097 55099 55101 55103 55105 56025 56027 56029 56031 56033 56035 RITCHE ROANE SUMMERS TAYLOR TUCKER TYLER UPSHUR WAYNE WEBSTER WETZEL WIRT WOOD WYOMING RUSK SA1NT CROIX SAUK SAWYER SHAWANO SHEBOYGAN TAYLOR TREMPEALEAU VERNON VILAS WALWORTH WASHBURN WASHINGTON WAUKESHA WAUPACA WAUSHARA WINNEBAGO WOOD SWEETWATER TETON UINTA WASHAKIE WESTON 54085 54087 54089 54091 54093 54095 54097 54099 54101 54103 54105 54107 54109 55107 55109 55111 55113 55115 55117 55119 55121 55123 55125 55127 55129 55131 55133 55135 55137 55139 55141 56037 56039 56041 56043 56045 C-20 APPENDIX C Part B - U. S. Territories FIPS Codes Territory Page Contents American Samoa .......................................................................................................................................................................... C-22 Federated States of Micronesia ........................................................................................................................................................C-22 GUAMC-22 Marshall Islands..................................................................................................................................................................................C-22 North Mariana Islands .......................................................................................................................................................................C-22 Palau C-22 Puerto Rico...........................................................................................................................................................................................C-22 U.S. Minor Outlying Islands.............................................................................................................................................................C-22 Virgin Islands .....................................................................................................................................................................................C-23 C-21 EASTERN WESTERN 60010 60050 MANUA AMERICAN SAMOA 60000 ROSE ISLAND 60020 60030 SWAINS ISLAND 60040 CHUUK 64002 KOSRAE 64005 POHNPEI 64040 YAP 64060 FEDERATED STATES OF MICRONESIA 64000 GUAM 66010 GUAM 66000 MARSHALL ISLANDS 68000 AILlNGINAE AILINGLAPLAP AILUK ARNO AUR BIKAR BIKINI BOKAK EBON 68007 68010 68030 68040 68050 68060 68070 68073 68080 ENEWETAK ERIKUB JABAT JALUIT JEMO KILI KWAJALEIN LAE LIB 68090 68100 68110 68120 68130 68140 68150 68160 68170 LIKIEP MAJURO MALOELAP MEJIT MILI NAMORIK NAMU RONGELAP RONGRIK 68180 68190 68300 68310 68320 68330 68340 68350 68360 TOKE UJAE UJELANG UTRIK WOTHO WOTJE 68385 68390 68400 68410 68420 68430 NORTHERN ISLAND 69085 ROTA 69100 SAIPAN 69110 TINIAN 69120 NORTHERN MARIANA ISLANDS 69000 AIMELIIK AIRAI ANGAUR HATOBOHEI 70002 70004 70010 70050 KAYANGEL KOROR MELEKEOK NGARAARD PALAU 70000 70100 70150 70212 70214 NGARCHELONG NGARDMAU NGATPANG NGCHESAR 70218 70222 70224 70226 NGEREMLENGUI NGIWAL PELELIU SONSOROL ADJUNTAS AGUADA AGUADILLA AGUAS BUENAS AIBONITO ANASCO ARECIBO ARROYO BARCELONETA BARRANQUITAS BAYAMO N CABO ROlO CAGUAS CAMUY CANOVANAS CAROLINA CATANO CAYEY CEIOA CIALES 72001 72003 72005 72007 72009 72011 72013 72015 72017 72019 72021 72023 72025 72027 72029 72031 72033 72035 72037 72039 CIDRA COAMO COMERIO COROZAL CULEBRA DORADO FAJARDO FLORIDA GUANICA GUAYAMA GUAYANILLA GUAYNABO GURABO HATILLO HORMIGUEROS HUMACAO ISABELA JAYUYA JUANA DIAZ JUNCOS PUERTO RICO 72000 72041 72043 72045 72047 72049 72051 72053 72054 720SS 72057 72059 72061 72063 72065 72067 72069 72071 72073 72075 72077 LAJAS LARES LAS MARIAS LAS PEDRAS LOIZA LUQUILLO MANATI MARICAO MAUNABO MAYAGUEZ MOCA MOROVIS NAGUABO NARANJITO OROCOVIS PATILLAS PENUELAS PONCE QUEBRADILLAS RINCON 72079 72081 72083 72085 72087 72089 72091 72093 72095 72097 72099 72101 72103 72105 72107 72109 72111 72113 72115 72117 RIO GRANDE SABANA GRANDE SALINAS SAN GERMAN SAN JUAN SAN LORENZO SAN SEBASTIAN SANTA ISABEL TOA ALTA TOA BAIA TRUJILLO ALTO UTUADO VEGA ALTA VEGA BAJA VIEQUES VILLALBA YABUCOA YAUCO 70227 70228 70350 70370 72119 72121 72123 72125 72127 72129 72131 72133 72135 72137 72139 72141 72143 72145 72147 72149 72151 72153 C-22 U.S. MINOR OUTLYING ISLANDS 74000 BAKER ISLAND HOWLAND ISLAMD JARVIS ISLAND 74050 74100 74150 JOHNSTON ISLAND KINGMAN REEF MIDWAY ISLANDS 74200 74250 74300 NAVASSA ISLAND PALMYRA ATOLL WAKE ISLAND 74350 74400 74450 ST. CROIX 78010 VIRGIN ISLANDS OF THE UNITED STATES 78000 78030 ST. THOMAS 78020 ST. JOHN APPENDIX C PART C Offshore ( Marine Area ) FIPS Codes Offshore (Marine Area) Eastern North Pacific Ocean, and along U.S. West Coast from Canadian border to Mexican border North Pacific Ocean near Alaska, and along Alaska coastline, Including the Bering Sea and the Gulf of Alaska Central Pacific Ocean, including Hawaiian waters South Central Pacific Ocean, including American Samoa waters Western Pacific Ocean, including Mariana Island waters Western North Atlantic Ocean, and along U.S. East Coast, from Canadian border south to Currituck Beach Light, N.C. Western North Atlantic Ocean, and along U.S. East Coast, South of Currituck Beach Light, N.C., following the coastline into Gulf of Mexico to Bonita Beach, FL., including the Caribbean Gulf of Mexico, and along the U.S. Gulf Coast from the Mexican77 border to Bonita Beach, FL. Lake Superior Lake Michigan Lake Huron Lake St. Clair Lake Erie Lake Ontario St. Lawrence River above St Regis FIPS Code 57000 58000 59000 61000 65000 73000 75000 91000 92000 93000 94000 96000 97000 98000 C-23 APPENDIX D MENU LISTINGS 10. Password Help 101. Access to Encoder 102. Access to Setup Menu 103. To Change Passwords 104. Password Lost 20. Encoder Operation Help 201, Not Available 202. Not Available 203. Not Available 204. Not Available 205. Not Available 206. Not Available 207. Not Available 208. Not Available 209. To Review Transmit Message Log 210. To Test On-Air Relay 30. Decoder Operation Help 301. To Acknowledge a New Message 302. To Change Between Automatic and Manual Mode 303. To Manual Forward a Message 304. To Review Received Message Log 40. Audio/Printer Operation Help 401. To Set Output Level On-Air 402. To Set Output Level Off-Air 403. Speaker Volume Adjustment 404. To Print Screen Setup Menu Set Station Time Zone Set Current Date/Time Daylight Saving?
Not Available Set Station FIPS Code Set Station Indentification Code Not Available Change Primary Password Change Setup Password Select Events To Auto Forward Add Locations To Auto Foward Verify Or Delete Locations To Auto Forward Not Available Not Available Voice Recorder Installed?
Not Available Enable Char Gen Interface Not Available Set LCD Contrast Record Voice Announcement Verify Voice Announcement Not Available Not Available Set Alert Timeout Set One-Button Manual Forward Enable C.G. Text for RWT Set Auto Mode Timer Not Available Not Available 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13,14, 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29,30. 31,32. 50. Encoder Setup Help 501. To Set Current Date/Time 502. To Set Station Time Zone 503. Daylight Saving?
504. Not Available 505. To Set Station FIPS Code 506. To Set Station Identification Code 507. To Set Attention Signal Duration 508. Not Available 509. Not Available 510. Not Available 601. To Select Events to Auto Forward 602. To Add Locations to Auto Forward 603. To Verify or Delete Locations to Auto Forward 60. Decoder Setup Help 70. Accessory Setup Help 701. To Enable Character Generator Interface 702. Voice Recorder Status 703. Not Available 704. Record Voice Announcement 705. To Verify Voice Announcement 706. To Enable CPU Interface 707. To Install Program Interrupt Unit 708. To Enable Remote Control Status Modules 80. Maintenance and Technical Support Help Operation Menu 801. To Replace Printer Paper 803. TFT Customer Service 1. 2. 3. 4. 5. 6. 7. 8. Review Received Messages Review Transmitted Messages Test On-Air Relay Test Alert Relay Set Output Level: On-Air Relay Open Set Output Level: On-Air Relay Closed Set Printer Operation Set Message Hold D-1 APPENDIX E EAS DECODER TO VIDEO CHARACTER GENERATOR INTERFACE 1. Introduction This specification describes the data and audio interface between the TFT EAS 911D and a video character generator (CG). The interconnections between the EAS 911D and the CG are through the COM2 J302, AUDIO OUTPUT J101, and the ON-AIR relay J106 on the rear panel of the EAS 911D. See section 5 of this Appendix for details. 2. General Sequence and Comments The protocol between the CG and EAS 911D is a hand-shaking sequence of codes for the CG and EAS 911D to communicate with each other in order to request or acknowledge header, audio, EOM or other data or audio transfer. The general sequence is for the Character Generator to request action after the EAS 911D informs the CG that a message is available. Please see the Protocol Table in Section 3 for details. 3. Protocol Table Purpose Step CG Data Out to EAS 911D Data Out EAS 911D Audio Out O n-Air Relay EAS 911D to CG to CG Status Remarks To inform the CG that the EAS 911D has a message to transmit To request pre-
recorded voice announcement To request a translation of the EAS header from the EAS 911D To request audio transmission of the EAS header and attention signal To request last alert voice message &
EOM 1 STX + Control-4 +
EAS Header + ETX 2A 2B 2C 3A STX + Control-6
+ ETX STX + Control-3
+ ETX STX + Control-6 +
ETX Recorded voice announcement 3B 4A STX + Control-1
+ ETX STX + Control-3 + EAS Header Translation +
ETX Closed 4B 4C 5A STX + Control-2
+ ETX 5B 5C STX + Control-1 +
ETX STX + Control-2 +
ETX EAS header & attention signal Closed Alert voice and EOM Closed A B B B B E-1 3. Protocol Table (Continued) CG Data Out to EAS 911D EAS 911D Data Out to CG EAS 911D Audio Out to CG O n-Air Relay Status Remarks Closed Closed Closed Open Closed Closed Closed B B C D E F G J, K J, K J, K J, K Purpose To request the last text message from EAS 911D To request only the last alert voice message stored in EAS 911D To inform CG of an exception condition
(abort, time-out) To request only the EOM audio To inhibit opening of the On-Air Relay To open the On-Air Relay To close the On-Air Relay Request EAS Audio Header Step 6A STX + Control-5
+ ETX 6B 7A STX + Control-7
+ ETX STX + Control-5 +
Text + ETX 7B 7C 8 9A 9B 9C 10 STX + Control-7 +
ETX STX + Control-8 +
ETX STX + Control-9
+ ETX STX + Control-A
+ ETX STX + Control-9
+ ETX 11A STX + Control-B
+ ETX 11B 12A STX + Control-C
+ ETX 12B 13A STX + Hex 0x16
+ ETX 13B 13C Alert voice EOM STX + Hex 0x16
+ ETX Audio Header STX + Hex 0x17 +
ETX STX + Hex 0x18 +
ETX STX + Hex 0x19 +
ETX Attention Signal Voice Announcement Closed Alert Voice Message Request Attention Signal Request Voice Announcement 14A STX + Hex 0x17
+ ETX 14B 14C 15A STX + Hex 0x18
+ ETX 15B 15C Request Alert Voice Message 16A STX + Hex 0x19
+ ETX 16B 16C E-2 3. Protocol Table (Continued) Purpose Step CG Data Out to EAS 911D EAS 911D Data Out to CG EAS 911D Audio Out to CG O n-Air Relay Status Request EOM 17A STX + Hex 0x1B Request EAS Header Request EAS Translation
+ ETX 17B 17C 18A STX + Hex 0x1C
+ ETX 18B 19A STX + Hex 0x21
+ ETX 19B EAS 943 Sends Live Audio Patch EAS 943 Ends Live Audio Patch 20A STX + Hex 0x2B
+ ETX 20B 21A STX + Hex 0x5A
+ ETX 21B 3.1 Remarks STX + Hex 0x1B +
ETX STX + Hex 0x1C +
ETX STX + Hex 0x21 +
ETX EOM Closed Live Audio Patch Closed Open Remarks J, K L K M M A. The EAS 911D will attempt to notify the CG that a message is available (Step 1A) up to 3 times with a 2 second pause between each attempt. The CG should acknowledge this notification with a request for more information about the message - for instance by requesting a translation of the EAS header, Step 3A. If the CG does not respond the EAS 911D will abort message transmission. B. The above protocol describes a sequence for initial message transmission. The CG may request information on the last transmitted message at a later time. However, in the interim the optional alert voice message may have been updated by an incoming non-forwardable message. C. During the initial message transmission protocol sequence, the EAS 911D will wait a maximum of 2 minutes for a request from the CG. If 2 minutes elapses without a request from the CG, the EAS 11 will timeout. After a timeout the EAS 911D transmit an exception code (Step 8) and abort message transmission. D. The EAS 911D will not interact with the CG when in Practice Mode. E. This command is intended to allow the On-Air relay to remain closed after each segment of the audio transmission, until the Open On-Air Relay command is received. When decoded, it initiates a 45-second timer. The Open On-Air Relay command will cause the On-Air relay to open as soon as the 45-second timer has expired. F. This command is intended to be used in conjunction with the Inhibit Opening Relay command. It should normally be issued after all audio transmissions have been completed. The relay will open as soon as the 45-second timer initiated with the Inhibit Opening Relay command has expired. G. This command allows the used to close the On-Air relay independent of any EAS 911D activity. Once closed, the relay will remain closed until another command or transmission causes it to open.
(Purposely omitted) H. I. All Request Audio commands 13-17 above) will be acknowledged by the EAS 911D when the audio is completed by sending the same command sequence to the I/F. J. The EAS 911D response to commands 13 to 17 and 19 above is identical to the original protocol, except that 13, 14 and 15 are now subsets of the original commands for continuous audio sequences. In addition, the acknowledge sequences reflect the new hex command values. K. The EAS 911D response to command 18 above is identical to the original protocol output of the header to the I/F, except wit the new command byte inserted, i.e.:
STX + Hex0x1C + EAS Header + ETX. E-3 L. Commands 20 and 21 above are available only when enabled via ALTERNATE I/F A and when the EAS 911D is connected to an EAS 943 Telephone Access Unit. 4.0 Mode of Operation A suggested operation and initial message transmission protocol sequence for each kind of transmission the EAS 911D may initiate follows. 4.1 When the EAS 911D is operated in Auto Mode and a non-priority message is being automatically forwarded:
a. EAS 911D informs CG that it has a message to transmit (Step 1). b. CG requests header translation (Step 3A). c. The EAS 911D transmits the header translation (Step 3B). d. The CG requests the audio header and attention signal (Step 4A). e. The EAS 911D transmits audio (Step 4B) followed by data acknowledge (Step 4C). f. CG requests alert voice message and audio EOM (Step 5A). g. The EAS 911D transmits alert voice and audio EOM (Step 5B) followed by data acknowledge
(Step 5C). 4.2 When the EAS 911D is operated in Manual Mode and the last received message is being manually forwarded by an operator:
a. Operator presses flashing SEND HEADER key on the EAS 911D front panel. b. The EAS 911D informs the CG that it has a message to transmit (Step 1). c. CG requests header translation (Step 3A). d. The EAS 911D transmits the header translation (Step 3B). e. The CG requests the audio header and attention signal (Step 4A). f. The EAS 911D transmits audio (Step 4B) followed by data acknowledge (Step 4C). g. CG requests alert voice message and EOM (Step 5A). h. The EAS 911D transmits the last audio alert voice message (Step 5B*) and then flashes the SEND EOM LED on the front panel. i. The operator presses SEND EOM on the EAS 911D front panel. j. The EAS 911D transmits audio EOM (Step 5B*) followed by data acknowledge (Step 5C). 4.3 When the EAS 911D is transmitting an encoded message:
Steps a - g are the same as for a manually forwarded message, described in 4.2. h. The EAS 911D flashes the SEND EOM LED on the front panel. Steps i and j are the same as for a manually forwarded message, described in 4.2. 4.4 When the EAS 911D is auto forwarding a priority message (event code is "EAN" or "EAT"):
a. EAS 911D informs CG that it has a message to transmit (Step 1). b. The CG should IMMEDIATELY request the audio header and attention signal (Step 4A). c. The EAS 911D transmits audio (Step 4B) followed by data acknowledge (Step 4C). d. The CG should IMMEDIATELY request alert voice message and EOM (Step 5A). e. The EAS 911D will begin audio feed-through to transmit the incoming priority alert voice message directly out the XLR audio output (Step 5B*). The CG should monitor and broadcast this audio. When the EAS 911D receives an EOM for the priority message it will transmit the audio EOM
(Step 5B*) and then send data acknowledge (Step 5C) to the CG. E-4 5. Additional Specifications Command Structure.............................. STX + Control + Optional Data + ETX Data........................................................ 9600 baud (8, N, 1), RS232, ASCII Control Codes Start-of-Text (STX).............................. Hex 0x02 End-of-Text (ETX)............................... Hex 0x03 Control-1............................................... Hex 0x04, request/acknowledge audio header & attention signal Control-2............................................... Hex 0x05, request/acknowledge alert voice & audio EOM Control-3............................................... Hex 0x06, request/acknowledge header translation Control-4............................................... Hex 0x07, notify C.G. that EAS 911D is ready to transmit Control-5............................................... Hex 0x08, request/acknowledge text message Control-6............................................... Hex 0x09, request/acknowledge user-recorded voice announcement Control-7............................................... Hex 0x0A, request/acknowledge alert voice only Control-8............................................... Hex 0x0B, inform C.G. of exception (abort or time-out) Data Connector..................................... DB9: Pin 2=Rx, Pin 3=Tx, Pin 5=GND Audio..................................................... 600 ohms balanced, 0.5 - 6.0 Vp-p Audio Connector.................................. XLR: Pin 1=GND, Pin 2=POS(+), Pin 3=NEG(-) 6. General Notes and References 1. Refer to Emergency Alert System, FCC Rules, Part 11, or TFT EAS Primer for the specification of the EAS protocol. 2. EOM is end-of-message. 3. The attention signal is the two-tone EBS signal of 853 Hz & 960 Hz. 4. Last text message refers to the ASCII text message stored in the EAS 911D. E-5 Figure C-1. System Interconnect Diagram E-6 APPENDIX F Event Code English Translation A Broadcast Station or Cable System A National Emergency Action Notification Network A Civil Authority The National Weather Service A Primary Entry Point ORIGINATOR AND EVENT CODE TRANSLATIONS Originator codes:
ORG EAS EAN CIV WXR PEP Event Code EAN EAT NIC NPT RMT RWT ADR AVA AVW BZW CAE CDW CEM CFA CFW DSW EQW EVI FRW FFA FFW FFS FLA FLW FLS HMW HWA English Translation A National Emergency Action Notification HWW A National Emergency Action Termination HUA HUW A National Information Center Message HLS A National Periodic Test A Required Monthly Test LEW LAE A Required Weekly Test NMN An Administrative Message TOE An Avalanche Watch An Avalanche Warning NUW A Blizzard Warning DMO A Child Abduction Emergency RHW A Civil Danger Warning SVR SVA A Civil Emergency Message SVS A Coastal Flood Watch A Coastal Flood Warning SPW SMW A Dust Storm Warning SPS An Earthquake Warning An Immediate Evacuation Notice TOA TOR A Fire Warning TRA A Flash Flood Watch A Flash Flood Warning TRW TSA A Flash Flood Statement TSW A Flood Watch A Flood Warning VOW WSA A Flood Statement WSW A Hazardous Materials Warning A High Wind Watch English Translation A High Wind Warning A Hurricane Watch A Hurricane Warning A Hurricane Statement A Law Enforcement Warning A Local Area Emergency A Network Message Notification A 911 Telephone Outage Emergency A Nuclear Power Plant Warning A Practice/Demo Warning A Radiological Hazard Warning A Severe Weather Warning A Severe Thunderstorm Watch A Severe Weather Statement A Shelter in Place Warning A Special Marine Warning A Special Weather Statement A Tornado Watch A Tornado Warning A Tropical Storm Watch A Tropical Storm Warning A Tsunami Watch A Tsunami Warning A Tsunami Warning A Winter Storm Watch A Winter Storm Warning F-1 APPENDIX G GLOSSARY OF EAS DECODER TERMS EXPLANATION The 853 and 960 Hz tone formerly used by the EBS The act of automatically retransmitting or relaying an EAS message without operator intervention whenever the EAS DECODER is set to Auto Mode and the EVENT and FIPS codes of a received message match those Events and FIPS codes set by the setup menu for Auto Forwarding. The normal, standby condition of the EAS DECODER in which the date and time are displayed in the LCD screen. Communications Port, or connector, on the rear panel of the EAS DECODER, which connects and enables various extenal devices The valid time period of an EAS event, e.g. "A tornado watch for the next 3 hours." In this case, "3 hours" is the duration. Emergency Alert System or the originator field code for a broadcast station or cable system in an EAS message End-of-Message; the FSK signal ("nnnn") sent at the end of an EAS message Federal Information Processing Identifier, a unique five-digit number for every county, parish, borough, or census district in the US and its possessions The fields of the EAS protocol: sync, ORG, EVENT, LOCATION (FIPSs), Duration, Date/Time Stamp, and Station ID; the FSK signal that consists of the header Liquid Crystal Display The state of operation of the EAS DECODER, i.e. Manual or Automatic National Oceanagraphic and Atmospheric Administration, a branch of the Department Originator, field in an EAS message, e.g. WXR-National Weather Service, CIV-Civil Authority The 3-digit number that must be entered after pressing the "PASSWORD"
key to gain operator or setup access to the EAS DECODER Printed Circuit Board PCB Primary Password The 3-digit code used by the station operator. Ready Mode Setup Password
(same as Banner Mode) The 3-digit code used by the station owner/manager/engineer to setup and change the basic operation of the EAS DECODER The call sign of the broadcast station at which this EAS DECODER is located, e.g. "KTFT/AM"; the cable system identifier, e.g. "CA0233 "). One-ninth parts of a county, parish, borough, or census district or US possession Specific Area Message Encoding G-1 TERM Attention Signal Auto Forward Banner Mode COM port Duration EAS EOM FIPS Header LCD Mode NOAA Commerce ORG Password Station ID Subdivision SAME
1 2 | Supplier's Declaration of Conformity | Cover Letter(s) | 124.03 KiB |
Integrated Public Alert and Warning System (IPAWS) Conformity Assessment Program Suppliers Declaration of Conformity (SDoC) SDOC-CAP_to_EAS_3320-12248 Alerting Solutions, Inc. 837 Arnold Drive, Suite 600 Martinez, CA 94553 Customer Contact: Alan Ma Phone: 925-228-2152 x120 Fax: 925-228-2114 alan.ma@AlertingSolutions.com TFT, Inc. 1953 Concourse Drive San Jose, CA 95131 Customer Contact: Darryl Parker Phone: 408-943-9323 x223 Fax: 408-432-9218 DParker@TFTInc.com Product Name: CAP-to-EAS Converter, Model 3320 (Software Version 1.2.2) FCC ID (if applicable): N/A Product Category: EAS Encoder/Decoder Product Description: The CAP-to-EAS Converter, Model 3320 (Software Version 1.2.2) supports the Emergency Alert System (EAS), including the generation of alerts for radio broadcasters and television station operators. Conformance to the Organization for the Advancement of Structured Information Standards (OASIS) CAP v1.2 Standard, the OASIS CAP v1.2 USA IPAWS Profile v1.0, and the CAP EAS Implementation Guide v1.0, allows CAP-to-EAS Converter, Model 3320 (Software Version 1.2.2) to receive digital messages through the Internet and other networks from local public safety operations centers and retransmit those messages in a timely manner. The CAP-to-EAS Converter, Model 3320 can provide CAP compliance for TFT, Burk, HollyAnne, and older Sage units. Installed Options: Software Version 1.2.2 Vendor-Provided Products Tested with CAP-to-EAS Converter, Model 3320:
Manufacturer Product Name Model No./Unique ID None 837 Arnold Drive, Suite 600 Martinez, CA 94553 Phone: 925-228-2152 Fax: 925-228-2114 Info@AlertingSolutions.com http://www.AlertingSolutions.com 1953 Concourse Drive San Jose, CA 95131 Phone: 408-943-9323 Fax: 408-432-9218 Info@TFTInc.com http://www.tftinc.com P a g e | 1 Additional Information (if necessary): Specifications for CAP-to-EAS Converter, Model 3320 (Software Version 1.2.2) as well as alert and warning accessories may be accessed at the following Web site: http://www.alertingsolutions.com. Alerting Solutions, Inc. hereby declares that CAP-to-EAS Converter, Model 3320 (Software Version 1.2.2) product(s) conform(s) to the Organization for the Advancement of Structured Information Standards (OASIS) Common Alerting Protocol (CAP) v1.2 Standard (1 July 2010), the OASIS CAP v1.2 USA IPAWS Profile v1.0 (13 October 2009), and the CAP EAS Implementation Guide v1.0 by passing the test cases in the referenced report in their entirety without exclusions. The report for the test performed at the Incident Management Test and Evaluation Laboratory (IMTEL), Science Applications International Corporation (SAIC), located at 75 Valley Oak Drive in Somerset, Kentucky, is identified as follows:
Test Report Identification: TR-CAP_to_EAS_3320-12248 issued May 2011. 6 June 2011 ____________________ _______________________________________________ Suppliers Authorized Representative Signature Issue Date __________________Efraim Petel___________________ Suppliers Authorized Representative Printed Name This information contained herein has been provided by the vendor of the product with permission to make the information publicly available. The U.S. Department of Homeland Security (DHS) is making this information available as a public service; however, DHS IS PROVIDING THE INFORMATION AS IS. DHS MAKES NO EXPRESS OR IMPLIED WARRANTIES AND SPECIFICALLY, DHS MAKES NO WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE ACCURACY OR USE OF THIS INFORMATION. Reference to any specific commercial products, processes, or services by trade name, trademark, vendor, or otherwise does not constitute an endorsement by or a recommendation from DHS. 837 Arnold Drive, Suite 600 Martinez, CA 94553 Phone: 925-228-2152 Fax: 925-228-2114 Info@AlertingSolutions.com http://www.AlertingSolutions.com 1953 Concourse Drive San Jose, CA 95131 Phone: 408-943-9323 Fax: 408-432-9218 Info@TFTInc.com http://www.tftinc.com P a g e | 2
1 2 | ATCB request for information | Cover Letter(s) | 16.08 KiB |
American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 July 10, 2002 RE: FCC ID: BIOEAS911D Attention: Bob Cole I have a few comments on this Application. 1 2 3 4 Records from the FCC prior to 1999 are not accessible for review. Please provide all appropriate documentation for review including internal photos, and external photos. Please provide the letter requesting confidentiality of the technical description and the schematics. The test report TFT Part 2-911D EAS Decoder Part 11 Compliance Test.pdf is unreadable. Please provide a readable report. The test report TFT Part 3-911D EAS Decoder Part 11 Compliance Test.pdf is unreadable. Please provide a readable report. Dennis Ward mailto:dward@AmericanTCB.com The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.
1 2 | Operational description | Operational Description | 17.81 KiB |
SECTION IX THEORY OF OPERATION 9.1 The EAS Information Super Highway The Emergency Alert System (EAS) is a nationwide network of radio and television broadcast and cable facilities that can originate or receive and forward (re-transmit) event- and location-specific Emergency Alert messages. Alert messages can originate from the White House, state and local safety agencies, Emergency Operation Centers
(EOC), and the National Weather Service (85% of alerts are weather related). When an agency is sues an Alert, it transmits an EAS header and message to local AM, FM, and TV stations and cable systems which, in turn, broadcast the message to the general public if the message matches the local requirements. The public can receive alert messages in a matter of seconds and can react quickly to impending emergencies. The EAS message contains digitally encoded event and location information in addition to a normal voice or text announcement. The encoded information permits the network of broadcast and cable stations to decode messages and forward them automatically or manually to a specific area affected by the emergency alert. 9.2 The EAS DECODER: An Overview The EAS DECODER is similar to a smart telephone answering machine. It receives and screens messages on one or two, records and stores them, and forwards selected messages manually or automatically. The digital header in the incoming message is decoded and translated, then displayed on the Liquid Crystal Display
(LCD) and logged on the printer. The event and location data is compared with the data stored in the Setup memory to determine if it should be forwarded. If the alert message is to be forwarded, the EAS DECODER inserts a new I.D. code and re-transmits it, along with a two-tone Attention Signal, the recorded voice message and an End Of Message signal. Forwarding can occur automatically or after operator intervention. Refer to Figure 9.2 for a simplified block diagram of the EAS DECODER. Audio Channel FSK Decoder EAS Message Memory EAS Encoder Audio Out Broadcast Transmitter Digital Voice Recorder Compare Yes: Auto Forward No: Ignore EAS CASTER User Programmed Memory Figure 9.2, EAS DECODER Block Diagram 9-1 A Closer Look: Detailed System Block Diagram 9.3 The EAS DECODER system consists of the Main Board, the Encoder and Decoder keyboards, the LCD Display Assembly, the Digital Voice Recorder, the Comm Expander and the Printer. Figure 1 in Appendix A illustrates the EAS DECODER system blocks in detail. 9.4 The EAS DECODER Main Board consists of three major system blocks: Audio Loop-Through and Switching, Digital Signal Processor/CPU, and Input/Output Control. 9.4.1 Audio Loop Through and Switching (Figure 2, Appendix A) The audio buffering, switching and control section is illustrated on sheet 1 of the Main Board schematic drawing
(6601-4060). Main Board (Figure 2, Appendix A) U1 and U2 provide two balanced input amplifiers for the Channel 1 and 2 audio inputs. Analog switches U3, U8 and U10 route audio signals to and from the inputs, outputs and voice recorder. U4 and U5 are Coders/Decoders
(CODECs) that convert the audio signals to digital data, and vice-versa. U7 provides two buffer amplifiers at the outputs of the CODECs. U11 is the internal speaker amplifier; U12 provides a balanced audio EAS message output. 9.4.2 Digital Signal Processor/CPU (Figure 2, Appendix A) The Digital Signal Processor (DSP) section and its related logic is illustrated on sheet 2 of the schematic drawing
(6601-4060). U14 is a Texas Instruments TMS320C26 digital signal processor that performs all encoding and decoding functions, and controls all I/O activity. U13 is a Field Programmable Gate Array (FPGA). It generates all internal timing signals and performs all internal digital signal routing. U15 is a real-time clock and provides battery backed-up memory for long term storage of setup information. U16 and U18 are the system random access memory (RAM);
U17 and U19 are the system read-only program memory. U21 is a reset circuit and watchdog timer. 9.4.3 Input/Output Control (Figure 2, Appendix A) Input/Output buffering and control for system peripherals and related equipment, is illustrated on sheet 3 of the schematic drawing (6601-4060). U25 through U29 are latches that control the printer, liquid crystal display (LCD), four port communication expander, audio multiplexers and relays. U23 controls the On-Air and Alert relays. U22 and U30 provide RS-232 inputs and outputs. 9.5 U501, U505. U509, U503, U507 and U511 in series form a 48-bit serial-to-parallel shift register that is used to illuminate the 40 encoder board LEDs. The bits of LED data are shifted in to the keyboard by the I/O control section, above, and then enabled to illuminate or flash the LEDs. U512, U510, U508, U506, U504 and U502 in series form a 48-bit parallel-to-serial shift register that is used to sense the 41 encoder key switches. The bits of switch data are shifted out of the encoder keyboard by the I/O control section, above, and are then interpreted by the DSP/CPU. Left Section Key Pad (Figure 4, Appendix A) 9-2 LCD Displ ay Assembly Right Section Key Pad (Figure 6, Appendix A) Digital Voice Recorder (Figure 8, Appendix A) 9.6 U601 and U603 in series form a 16-bit serial-to-parallel shift register that is used to illuminate the 12 decoder board LEDs. The bits of LED data are shifted in to the keyboard by the I/O control section, and then enabled to illuminate or flash the LEDs. U604 and U602 in series form a 16-bit parallel-to-serial shift register that is used to sense the ten decoder key switches. The bits of switch data are shifted out of the decoder keyboard by the I/O control section, above, and are then interpreted by the DSP/CPU. 9.7 The LCD Display Assembly is a 16-character back-lit display with contrast controlled by setup software. The LCD assembly is controlled by the FPGA through an 8-bit parallel data interface at U26 on the main board. 9.8 U3 is a sampling analog-to-digital (A-D) and digital-to-analog (D-A) converter that converts incoming voice messages to digital data and stores the data in memories U5, U6, U7, U8 and U9. U10 and U11 select memory locations for voice storage. To play back a message, U3 retrieves digital data from the memories and converts it back into its original analog form. U4 and U12 provide audio signal buffering, gain, and Automatic Level Control (ALC). U2 controls the routing of the audio input and output signals. The FPGA on the main board controls U3 and U2 through an 8-bit parallel data interface at U1. 9.9 An 24-column ASCII impact printer is controlled by the FPGA through an 8-bit parallel data interface. 9.10 An COM Port Expander provides communication links to external EAS DECODER related equipment such as a character generator or PC controller. U302 and U303 are Dual Asynchronous Receiver/Transmitters (DUARTs) that convert parallel data to serial data, and vice-versa. They transmit data to and from the main board through an 8-bit parallel interface at U301. They transmit data to COM2 outputs through EIA quad line driver U306. They receive data from COM2 from EIA quad line receiver U305. The DUARTs are controlled by the FPGA on the main board. COM Port Expander (Figure 12, Appendix A) Printer 9-3
1 2 | Power of Attorney Letter | Cover Letter(s) | 16.41 KiB |
ma 7 INE 2243 RINGWOOD AVENUE An MT!I Company SAN JOSE, CA 95131-1737 LETTER OF AUTHORIZATION Date: July 17, 2002 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 Gentlemen:
Please be advised that TFT Inc. authorizes EMCE Engineering to act on our behalf, until otherwise notified, for applications submitted to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefit, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Lh Teg Edmund Fong Executive Vice President
(408) 943-9323 @ FAX (408) 432-9218 Sound Quality for Over 30 Years
1 2 | Request for confidentiality | Cover Letter(s) | 14.70 KiB |
mE mE INET 2243 RINGWOOD AVENUE An MTI Company SAN JOSE, CA 95131-1737 REQUEST FOR CONFIDENTIALITY Date: July 17, 2002 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: BIOEAS911D Please be advised that the following information is to be held confidential on behalf of TFT Inc.:
Block Diagram Schematic Diagrams The application contains technical information which TFT Inc. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. SLA wes Edmund Fong Executive Vice President
(408) 943-9323 e FAX (408) 432-9218 Sound Quality for Over 30 Years
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-08-13 | EAD - Part 11 Emergency Alert Devices | Class II permissive change or modification of presently authorized equipment | |
2 | 2002-07-23 | 88 ~ 108 | EAD - Part 11 Emergency Alert Devices | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2012-08-13
|
||||
1 2 |
2002-07-23
|
|||||
1 2 | Applicant's complete, legal business name |
TFT Inc
|
||||
1 2 | FCC Registration Number (FRN) |
0007381023
|
||||
1 2 | Physical Address |
2243 Ringwood Avenue
|
||||
1 2 |
San Jose, 95131-1737
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
h******@americantcb.com
|
||||
1 2 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
BIO
|
||||
1 2 | Equipment Product Code |
EAS911D
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
D******** E**** P********
|
||||
1 2 | Title |
President
|
||||
1 2 | Telephone Number |
408 9********
|
||||
1 2 | Fax Number |
408 4********
|
||||
1 2 |
d******@tftinc.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
TFT, Inc.
|
||||
1 2 |
EMCE Engineering
|
|||||
1 2 | Name |
E******** F********
|
||||
1 2 |
B******** C****
|
|||||
1 2 | Physical Address |
1953 Concourse Drive
|
||||
1 2 |
44366 South Brimmer Blvd
|
|||||
1 2 |
San Jose, California 95131-1708
|
|||||
1 2 |
Fremont, California 94538
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
408-9******** Extension:
|
||||
1 2 |
510-4********
|
|||||
1 2 | Fax Number |
408-4********
|
||||
1 2 |
408-4********
|
|||||
1 2 |
E******@TFTInc.com
|
|||||
1 2 |
b******@universalcompliance.com
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
TFT, Inc.
|
||||
1 2 |
EMCE Engineering
|
|||||
1 2 | Name |
D****** E******** P******
|
||||
1 2 |
B**** C********
|
|||||
1 2 | Physical Address |
1953 Concourse Drive
|
||||
1 2 |
44366 South Brimmer Blvd
|
|||||
1 2 |
San Jose, California 95131-1708
|
|||||
1 2 |
Fremont, California 94538
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
408-9******** Extension:
|
||||
1 2 |
510-4********
|
|||||
1 2 | Fax Number |
408-4********
|
||||
1 2 |
408-4********
|
|||||
1 2 |
D******@TFTInc.com
|
|||||
1 2 |
b******@universalcompliance.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 | Yes | |||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | EAD - Part 11 Emergency Alert Devices | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | EAS911D EAS Decoder | ||||
1 2 | Emergency Alert System Decoder | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
EMCE Engineering, Inc.
|
||||
1 2 | Name |
B****** C******
|
||||
1 2 | Telephone Number |
510-4********
|
||||
1 2 | Fax Number |
510-4********
|
||||
1 2 |
b******@universalcompliance.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 11 | |||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 11 | 0.54 | 1.72 | % | ||||||||||||||||||||||||||||||||||||
2 | 2 | 11 | 88 | 108 | % |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC