Overview Aries True Wireless Bluetooth Earbuds 100244-001B IC ID: 21530-100244 FCC ID: 2AGR4-100244 Instruction Manual 4 1. Power Button 2. Charging Point 3. LED Indicator Light 4. Micro USB Charging Port 5. Microphone 2 5 3 1 Bluetooth Operation 1. Please ensure that the Bluetooth function has been turned on in the settings of your Bluetooth enabled device. 2. Turn the earbuds on by holding the power button for 5 seconds for both the left and right one, the earbuds will get paired with each other automatically. LED indicator light on left earbuds will flash to detect Bluetooth enabled devices near you and will enter pairing mode. 3. GEMLINE EB will appear on the Bluetooth device list, select GEMLINE EB to establish pairing. If instructed to enter a PIN code, please enter 0000. 4. The LED indicator light will turn to blue after successful pairing. 5. When you want to play audio from another Bluetooth device, disconnect the earbuds from the original device and re-pair the earbuds with a new Bluetooth enabled device. Button Control Power On/Off: Hold press the Power button Play/Pause: Short press power button Volume Up/Volume DownDouble click on the power button on left earbuds for volume down / Double click on the power button on right earbuds for volume up Previous Track/ Next Track: Hold 2 seconds on power button on left earbuds for previous track/ Hold 2 seconds on power button on right earbuds for next track Hands-free phone use Answer incoming call: Short press power button. End call: Short press power button. Reject call: Press and hold 2 seconds on power button. Charging the Earbuds 1. When the case battery is low, please charge via the included USB cable. The charging time is approximately 3 hours and provides up to 6 hours of continuous operation. Standby time is approximately 12 hours. 2. When the earbuds battery is low, please put into battery case for charging, the charging time is approximately 1.3 hours and provides up to 3 hours of continuous operation. 3. The case LED indicator light will be red flashing during charging and will keep red once it is fully charged. 4. The earbuds LED indicator light will be red during charging and will turn off once it is fully charged. Warning 1. Do not disassemble, repair, or modify the earbuds. 2. Do not place product in or near fire to avoid danger, as it uses a lithium battery. 3. Avoid storage at extreme temperatures, this can shorten the battery life and may affect the earbuds. 4. Keep the earbuds dry and do not store the earbuds in damp areas to avoid damage to the earbuds. 5. Avoid dropping the earbuds as it may cause damage the product. Front Cover page 02 page 03 page 04 page 05 Specification Model: Aries True Wireless Bluetooth Earbuds Bluetooth specificationBluetooth V5.0 Profiles Supported: A2DP, AVCTP, AVDTP, AVRCP, HFP, SPP, SMP, ATT, GAP, GATT, RFCOMM, SDP, 2CAP Wireless Working Range: 10m (without obstacles) Built-in Battery: Lithium Battery 720mAh for battery50mAh for each earbuds USB Recharge Voltage: DC 5V Output Power: 18mW Frequency Response: 20Hz-20KHz Packing Bluetooth Earbuds USB Charging Cable Storage Pouch User Manual Gift Box Kind Reminder 1. To prolong the earbuds life span and to avoid hearing damage, please do not listen to music under high volume for long periods of time. 2. When an error occurs with the earbuds, please turn off the earbuds and restart it to troubleshoot. 3. When the earbuds power is low, the Bluetooth range may be affected. Please charge the earbuds to avoid disruptions during use. Unable to pair the speaker with a mobile device 1. Inspect whether the earbuds are searching for a Bluetooth enabled device to connect to. If not, restart the earbuds. 2. Difficulty in searching and connecting to a desired device can be affected if multiple devices are equipped, turned on, and in range for Bluetooth connectivity. Please turn off or disable the Bluetooth function on the other devices. 3. The power of the battery is insufficient, please recharge the earbuds. The music stops from time to time The sound is low or distorted The Bluetooth indicator light remains OFF 1. Inspect the distance between the earbuds and the Bluetooth enabled device, it may exceed the Bluetooth transmission range. 2. Inspect if there is an obstacle between the earbuds and the Bluetooth enabled device. 3. The power of the battery is insufficient, please recharge the earbuds. 1. Inspect the volume of the connected earbuds or Bluetooth enabled device and adjust the volume as needed. 2. The power of the battery is insufficient, please recharge the earbuds. 1. The power of the battery is insufficient, please recharge the earbuds. 2. Restart the earbuds. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by The Gem Group is under license. Other trademarks and trade names are those of their respective owners. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
(1) L' appareil ne doit pas produire de brouillage;
(2) L' appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d' en compromettre le fonctionnement. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Back Cover page 06 page 07 page 08 page 09