FCC ID: 2AGR4-101790 Auden Aluminum Wireless Charging Pad

Overview Auden Aluminum Wireless Charging Pad Operation 1. Plug the power adapter into the wall socket (adapter not included) 2. USB-A side connects to the power wall adapter, USB-C side connects to the wireless charger side, the LED light will illuminate blue which means the unit is ready to charge your device. 3. Place your device on to the wireless charger, the LED light will change from blue to green which denotes the device is being charged. Power Adapter Wireless charger Indicator Specification Qi Certified Input: 5V/2.0A, 9V/2.0A Output: 5W/7.5W/10W Charging fr Transmission Distance: 5mm Efficiency: 75%

Product size: 100*10.5mm USB Micro Cable Type-C interface IC: 21530-101790 FCC ID: 2AGR4-101790 Instruction Manual Note: Only the QC2.0/QC3.0 Standard power adapter can support this product's fast charging. Adapters are not included with the product. Indicator Indicating status and protection function 1. LED blue light: Standby 2. LED green light: Charging 3. Blue light flashing: device is not correctly placed on the wireless charger, over temperature protection, or detects metal on the back of the device Packing Auden Aluminum Wireless Charging Pad USB-A to USB-C Type Charging Cable User Manual page 02 page 03 page 04 FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user's authority to operate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and candidate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. ISED Statement This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:

This device may not cause interference; and This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

lappareil ne doit pas produire de brouillage;

lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 10 cm surrounding the device and 10 cm above the top surface of the device must be respected. Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrl. au cours de l'opration de l'appareil sur une distance de 10 cm autour de l'appareil et de 10 cm au - dessus de la surface suprieure de l'appareil doit tre respect. page 05 page 06 page 07 page 08

Page 1 of 1 FCC ID: 2AGR4-101790 IC: 21530-101790 LABEL AND LOCATION Auden Aluminum Wireless Charging Pad Model: 101790-128B FCC ID: 2AGR4-101790 IC: 21530-101790

(Size: L6.0cm x4.0cm) Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Building A and 301 Building C, Juji Industrial Park, Yabianxueziwei Shajing Street, Baoan District, Shenzhen, 518000, P.R.C. Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

The Gem Group, Inc. 9 International Way, Lawrence Massachusetts 01843 United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-6-9 To whom it may concern:

We, The Gem Group, Inc., hereby certify that the equipment for which authorization is sought

(FCC ID:2AGR4-101790) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, Signature Tina Song Manager The Gem Group, Inc. 2 0 V

, U

) i i

d n a

) i

) 5

) d

1 1 9

. 2 _ u q E d e r e v o C

l e d o m

_ 2 6 The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2023-6-9>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AGR4-101790 Model name 101790-128B For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title Tina Song/Manager Company:

The Gem Group, Inc. Address:

9 International Way, Lawrence Massachusetts 01843 United States Phone:

+86-755-2730-9361 Fax:

+86-755-2370-9367 E-Mail:

tinasong@thegemgroup.com

The Gem Group, Inc. 9 International Way, Lawrence Massachusetts 01843 United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-6-9 To whom it may concern:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AGR4-101790 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Tina Song/Manager The Gem Group, Inc. 9 International Way, Lawrence Massachusetts 01843 United States

+86-755-2730-9361

+86-755-2370-9367 tinasong@thegemgroup.com

The Gem Group, Inc. Section 2.911(d)(7) USA Agent for Service of Process Company name: The Gem Group, Inc. Address: 9 International Way, Lawrence, MA 01843, USA Product Name: Auden Aluminum Wireless Charging Pad FCC ID: 2AGR4-101790 Model(s): 101790-128B 2.911(d)(7) USA Designated Agent for Service of Process We, [Insert applicant name] (the applicant) designate [Agent located in the United States] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Applicant Company name: The Gem Group, Inc. USA Address: 9 International Way, Lawrence, MA 01843, USA Company name: The Gem Group, Inc. Address: 9 International Way, Lawrence, MA 01843, USA FRN Number: 0025106527 Contact Name:Tina Song Telephone No: +86-755-2730-9361 Email: tinasong@thegemgroup.com FCC Grantee Code:2AGR4 Contact Name: Tina Song Telephone No: +86-755-2730-9361 Email:

tinasong@thegemgroup.com Signature:

Title: Manager Date:2023/6/2 Signature:

Title: Manager Date: 2023/6/2 2.911 (d)(7)USA Agent v1.4 The Gem Group, Inc. NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.4