FCC ID: 2AGR4-100932 Easton Wireless Charger

instruction sheets 1) The folded size should be 3W x 3H. 2) Please exactly follow all the trim marks and fold marks. 3) Please exactly follow the page in proper order.(The page numbers do not need to print.) 4) Use 128gsm gloss art paper for bulk production. 5) The color of this kind instruction is : 1C(C0M0Y0K100) 6) S fold should be used for this item. Easton Wireless Charger Operation 1. Plug the power adapter into the wall socket. 2. USB-A side connects to the power wall adapter, USB-C side connects to the wireless charger side, the LED light will illuminate blue which means the unit is ready to charge your device. 3. Place your device on to the wireless charger, the LED light will change from blue to green which denotes the device is being charged. LED Indicator Light Power Adapter Overview USB-C interface Specification Input: 5V/2.0A, 9V/2.0A Output: 5W/7.5W/10W Charging frequency: 110.7-148 KHz Transmission Distance: 5mm Efficiency: 75%

Product size: L76*W150*H7mm USB Micro Cable USB-C Interface IC: 21530-100932 FCC ID: 2AGR4-100932 Instruction Manual Note: Only the QC2.0/QC3.0 Standard power adapter can support this product's fast charging. Adapters are not included with the product. page 02 page 03 page 04 FCC Statement This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user's authority to operate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and candidate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Increase the separation between the equipment and any other radio device. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ISED Statement This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:

This device may not cause interference; and This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

lappareil ne doit pas produire de brouillage;

lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. page 05 page 06 page 07 page 08 Put mobile phone on Charger Remove the mobile phone from Charger Indicating status and protection function 1. LED blue light: Standby 2. LED green light: Charging 3. Blue light flashing: Device is not correctly placed on the wireless charger, over temperature protection, or detects metal on the back of the device. Packing Easton Wireless Charger USB-A to USB-C Type Charging Cable User Manual This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 10 cm surrounding the device and 10 cm above the top surface of the device must be respected. Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrl. au cours de l'opration de l'appareil sur une distance de 10 cm autour de l'appareil et de 10 cm au - dessus de la surface suprieure de l'appareil doit tre respect.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AGR4-100932 IC: 21530-100932 Label and Location Item#:100932-001 FCC ID: 2AGR4-100932 IC: 21530-100932 Input: DC 5V/2.0A, 9V/2.0A Output: 5W/7.5W/10W Made In China Item#:100932-050 FCC ID: 2AGR4-100932 IC: 21530-100932 Input: DC 5V/2.0A, 9V/2.0A Output: 5W/7.5W/10W Made In China Size: L: 5.0cm*W: 3.0cm Item#:100932-213 FCC ID: 2AGR4-100932 IC: 21530-100932 Input: DC 5V/2.0A, 9V/2.0A Output: 5W/7.5W/10W Made In China Label Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

The Gem Group, Inc. Add: 9 International Way, Lawrence, MA 01843, United States Date: 2021-4-8 FCC ID: 2AGR4-100932 Dear Sir/Madam, We, The Gem Group, Inc. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product name: Easton Wireless Charger Model no.: 100932-001, 100932-050, 100932-213 Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Tina Song/Manager The Gem Group, Inc. 9 International Way, Lawrence, MA 01843, United States

+86-755-2730-9361

+86-755-2370-9367 tinasong@thegemgroup.com

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2021-4-8>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AGR4-100932 Model name 100932-001 For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title Tina Song/Manager Company:

The Gem Group, Inc. Address:

9 International Way, Lawrence, MA 01843, United States Phone:

+86-755-2730-9361 Fax:

+86-755-2370-9367 E-Mail:

tinasong@thegemgroup.com

The Gem Group, Inc. 9 International Way, Lawrence, MA 01843, United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

2021-4-8 We, The Gem Group, Inc. the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AGR4-100932 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Tina Song/Manager The Gem Group, Inc. 9 International Way, Lawrence, MA 01843, United States

+86-755-2730-9361

+86-755-2370-9367 tinasong@thegemgroup.com