Everly Bluetooth® Speaker
IC: 21530-101131
FCC ID: 2AGR4-101131
Instruction Manual
SPECIFICATION
Model: Everly Bluetooth® Speaker
Bluetooth Specifications: Bluetooth® V5.0
Profiles Supported: A2DP/AVRCP/HSP/HFP
Wireless working range: 10M (without obstacles)
Built-in battery: Lithium Battery 1200mAh
USB Recharge voltage: DC 5V
Output power: 5W
Frequency Response: 20Hz-20KHz
Sensitivity: ≥90dB
Product dimensions: φ76mm * H101mm
Playback time: 8 hours
Charging time: 4.5 hours
PACKING LIST
Bluetooth® Speaker
USB Charging Cable
User Manual
Gift Box
OVERVIEW
6
7
1
2
4
5
3
1.Power On/Off button
2.Previous Track/Volume down
3.Play/Pause, Hands-free call button
4.Next Track/Volume Up
5.Multi-function button
6.Micro SD slot
7.Micro USB Charging Port
Bluetooth Operation
1. Please ensure that the Bluetooth function has been turned on in the
settings of your Bluetooth enabled device.
2. Turn the speaker on, the indicator light will flash to detect Bluetooth
enabled devices near you and will enter pairing mode. The indicator
light will go off if no Bluetooth devices are detected within 5 minutes.
3.”GEMLINE SPKR” will appear on the Bluetooth device list, select
“GEMLINE SPKR” to establish pairing. If instructed to enter a PIN
code, please enter ‘0000’.
4. When you want to play audio from another Bluetooth device,
disconnect the speaker from the original device and follow steps 1-3 to
re-pair the speaker with a new Bluetooth enabled device.
BUTTON CONTROL
• Power On/Off: Press and hold the Power On/Off button for 2
seconds.
• Play/Pause: Quickly press the Play/Pause button once.
• Volume Up/ Next Track: Quickly press the + button once to change
music to next track. Press and hold to increase volume.
• Volume Down/ Previous Track: Quickly press the - button once to
change music to previous track. Press and hold to decrease
volume.
HANDS-FREE PHONE USE
• Answer incoming call: Quickly press the Play/Pause button once.
• End call: Quickly press the Play/Pause button once.
• Reject incoming call: Press and hold the Play/Pause button twice.
SD CARD PLAYING
Insert a SD card, the speaker will play the music on the card
automatically.
Quickly press the multi-function button once to change the playback
mode to Bluetooth mode.
TRUE WIRELESS STEREO(TWS)
You can connect two Everly Bluetooth® Speakers as a pair for
stronger surround sound stereo effect.
1. Make sure the Bluetooth function is OFF on your mobile device.
2. Turn on both speakers.
3. Quickly press the multi-function button once on one of the speakers
(this will become the main speaker), both of speakers will enter TWS
pairing mode. The TWS connection is successful once the LED of the
main speaker flashes blue and the LED of the auxiliary speaker turns
blue.
4. Follow the steps outlined in the Bluetooth operation section to
connect your speakers to your mobile device.
CHARGING THE SPEAKER
1.When the battery is low, please charge via the included USB cable.
The charging time is approximately 4.5 hours and provides up to 8
hours of continuous operation. Standby time is approximately 10
hours.
2.The LED indicator light will be red during charging and will turn off
once it is fully charged.
WARNING
1. Do not disassemble, repair, or modify the speaker.
2. Do not place product in or near fire to avoid danger, as it uses a
lithium battery.
3. Avoid storage at extreme temperatures, this can shorten the battery
life and may affect the speaker.
4. Keep the speaker dry and do not store the speaker in damp areas to
avoid damage to the speaker.
5. Avoid dropping the speaker as it may damage the speaker.
KIND REMINDER
1. To prolong the speaker’s life span and to avoid hearing damage,
please do not listen to music under high volume for long periods of
time.
2. When an error occurs with the speaker, please turn off the speaker
and restart it to troubleshoot.
3. When the speaker’s power is low, the Bluetooth range may be
affected. Please charge the speaker to avoid disruptions during use.
Problem
Troubleshooting Method
Unable to pair the
speaker with a mobile
device
The music stops from
time to time
The sound is low or
distorted
1. Inspect whether the speaker is
searching for a Bluetooth enabled device
to connect to. If not, restart the speaker.
2. Difficulty in searching and connecting to
a desired device can be affected if multiple
devices are equipped, turned on, and in
range for Bluetooth connectivity. Please
turn off or disable the Bluetooth function on
the other devices.
3. The power of the battery is insufficient,
please recharge the speaker.
1. Inspect the distance between the speaker
and the Bluetooth enabled device, it may
exceed the Bluetooth transmission range.
2. Inspect if there is an obstacle between the
speaker and the Bluetooth enabled device.
3. The power of the battery is insufficient,
please recharge the speaker.
1. Inspect the volume of the connected
speaker or Bluetooth enabled device and
adjust the volume as needed.
2. The power of the battery is insufficient,
please recharge the speaker.
The Bluetooth indicator
light remains OFF
1. The power of the battery is insufficient,
please recharge the speaker.
2. Restart the speaker.
The Bluetooth® word mark and logos are registered trademarks
owned by the Bluetooth SIG, Inc. and any use of such marks by The
Gem Group is under license. Other trademarks and trade names are
those of their respective owners.
English:This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
French: Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont
conformes aux RSS exemptés de licence d'Innovation, Sciences et Développement
économique Canada.
L'exploitation est soumise aux deux conditions suivantes :
(1) Cet appareil ne doit pas provoquer d'interférences.
(2) Cet appareil doit accepter toute interférence, y compris les interférences
susceptibles de provoquer un fonctionnement indésirable de l'appareil.
l'appareil numérique du ciem conforme canadien peut - 3 (b) / nmb - 3 (b).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS
102 and compliance with RSS 102 RF exposure, users can obtain Canadian information
on RF exposure and compliance.
cet appareil est conforme à l'exemption des limites d'évaluation courante dans la
section 2.5 du cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs
peuvent obtenir des données canadiennes sur l'exposition aux champs rf et la
conformité.
This equipment complies with Canada radiation exposure limits set forth for an
uncontrolled environment.
Cet équipement est conforme aux limites d'exposition aux rayonnements du Canada
établies pour un environnement non contrôlé.
Portable
RF Exposure Statement
The device has been evaluated to meet general RF exposure requirement. This
equipment should be installed and operated with minimum distance 0mm between
the radiator and your body.
L'appareil a été évalué pour répondre aux exigences générales d'exposition
aux RF.Cet équipement doit être installé et utilisé avec une distance minimale de 0
mm entre le radiateur et votre corps.
PMN: Everly Bluetooth Speaker
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
·Reorient or relocate the receiving antenna.
·Increase the separation between the equipment and receiver.
·Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
·Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0mm between the radiator and your body.